# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/i2c/st,stm32-i2c.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: I2C controller embedded in STMicroelectronics STM32 I2C platform

maintainers:
  - Pierre-Yves MORDRET <pierre-yves.mordret@st.com>

allOf:
  - $ref: /schemas/i2c/i2c-controller.yaml#
  - if:
      properties:
        compatible:
          contains:
            enum:
              - st,stm32f7-i2c
    then:
      properties:
        i2c-scl-rising-time-ns:
          default: 25

        i2c-scl-falling-time-ns:
          default: 10

        st,syscfg-fmp:
          description: Use to set Fast Mode Plus bit within SYSCFG when
                       Fast Mode Plus speed is selected by slave.
                       Format is phandle to syscfg / register offset within
                       syscfg / register bitmask for FMP bit.
          allOf:
            - $ref: "/schemas/types.yaml#/definitions/phandle-array"
            - items:
                minItems: 3
                maxItems: 3

  - if:
      properties:
        compatible:
          contains:
            enum:
              - st,stm32f4-i2c
    then:
      properties:
        clock-frequency:
          enum: [100000, 400000]

properties:
  compatible:
    enum:
      - st,stm32f4-i2c
      - st,stm32f7-i2c

  reg:
    maxItems: 1

  interrupts:
    items:
      - description: interrupt ID for I2C event
      - description: interrupt ID for I2C error

  resets:
    maxItems: 1

  clocks:
    maxItems: 1

  dmas:
    items:
      - description: RX DMA Channel phandle
      - description: TX DMA Channel phandle

  dma-names:
    items:
      - const: rx
      - const: tx

  clock-frequency:
    description: Desired I2C bus clock frequency in Hz. If not specified,
                 the default 100 kHz frequency will be used.
                 For STM32F7, STM32H7 and STM32MP1 SoCs, Standard-mode,
                 Fast-mode and Fast-mode Plus are supported, possible
                 values are 100000, 400000 and 1000000.
    default: 100000
    enum: [100000, 400000, 1000000]

required:
  - compatible
  - reg
  - interrupts
  - resets
  - clocks

examples:
  - |
    #include <dt-bindings/mfd/stm32f7-rcc.h>
    #include <dt-bindings/clock/stm32fx-clock.h>
    //Example 1 (with st,stm32f4-i2c compatible)
      i2c@40005400 {
          compatible = "st,stm32f4-i2c";
          #address-cells = <1>;
          #size-cells = <0>;
          reg = <0x40005400 0x400>;
          interrupts = <31>,
                       <32>;
          resets = <&rcc 277>;
          clocks = <&rcc 0 149>;
      };

    //Example 2 (with st,stm32f7-i2c compatible)
      i2c@40005800 {
          compatible = "st,stm32f7-i2c";
          #address-cells = <1>;
          #size-cells = <0>;
          reg = <0x40005800 0x400>;
          interrupts = <31>,
                       <32>;
          resets = <&rcc STM32F7_APB1_RESET(I2C1)>;
          clocks = <&rcc 1 CLK_I2C1>;
      };

    //Example 3 (with st,stm32f7-i2c compatible on stm32mp)
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/stm32mp1-clks.h>
    #include <dt-bindings/reset/stm32mp1-resets.h>
      i2c@40013000 {
          compatible = "st,stm32f7-i2c";
          #address-cells = <1>;
          #size-cells = <0>;
          reg = <0x40013000 0x400>;
          interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
                       <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
          clocks = <&rcc I2C2_K>;
          resets = <&rcc I2C2_R>;
          i2c-scl-rising-time-ns = <185>;
          i2c-scl-falling-time-ns = <20>;
          st,syscfg-fmp = <&syscfg 0x4 0x2>;
      };
...