crypto: Kconfig - move x86 entries to a submenu
Move CPU-specific crypto/Kconfig entries to arch/xxx/crypto/Kconfig
and create a submenu for them under the Crypto API menu.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
diff --git a/arch/x86/crypto/Kconfig b/arch/x86/crypto/Kconfig
new file mode 100644
index 0000000..04f4bae
--- /dev/null
+++ b/arch/x86/crypto/Kconfig
@@ -0,0 +1,500 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "Accelerated Cryptographic Algorithms for CPU (x86)"
+
+config CRYPTO_CURVE25519_X86
+ tristate "x86_64 accelerated Curve25519 scalar multiplication library"
+ depends on X86 && 64BIT
+ select CRYPTO_LIB_CURVE25519_GENERIC
+ select CRYPTO_ARCH_HAVE_LIB_CURVE25519
+
+config CRYPTO_AES_NI_INTEL
+ tristate "AES cipher algorithms (AES-NI)"
+ depends on X86
+ select CRYPTO_AEAD
+ select CRYPTO_LIB_AES
+ select CRYPTO_ALGAPI
+ select CRYPTO_SKCIPHER
+ select CRYPTO_SIMD
+ help
+ Use Intel AES-NI instructions for AES algorithm.
+
+ AES cipher algorithms (FIPS-197). AES uses the Rijndael
+ algorithm.
+
+ Rijndael appears to be consistently a very good performer in
+ both hardware and software across a wide range of computing
+ environments regardless of its use in feedback or non-feedback
+ modes. Its key setup time is excellent, and its key agility is
+ good. Rijndael's very low memory requirements make it very well
+ suited for restricted-space environments, in which it also
+ demonstrates excellent performance. Rijndael's operations are
+ among the easiest to defend against power and timing attacks.
+
+ The AES specifies three key sizes: 128, 192 and 256 bits
+
+ See <http://csrc.nist.gov/encryption/aes/> for more information.
+
+ In addition to AES cipher algorithm support, the acceleration
+ for some popular block cipher mode is supported too, including
+ ECB, CBC, LRW, XTS. The 64 bit version has additional
+ acceleration for CTR and XCTR.
+
+config CRYPTO_BLOWFISH_X86_64
+ tristate "Blowfish cipher algorithm (x86_64)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_BLOWFISH_COMMON
+ imply CRYPTO_CTR
+ help
+ Blowfish cipher algorithm (x86_64), by Bruce Schneier.
+
+ This is a variable key length cipher which can use keys from 32
+ bits to 448 bits in length. It's fast, simple and specifically
+ designed for use on "large microprocessors".
+
+ See also:
+ <https://www.schneier.com/blowfish.html>
+
+config CRYPTO_CAMELLIA_X86_64
+ tristate "Camellia cipher algorithm (x86_64)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ imply CRYPTO_CTR
+ help
+ Camellia cipher algorithm module (x86_64).
+
+ Camellia is a symmetric key block cipher developed jointly
+ at NTT and Mitsubishi Electric Corporation.
+
+ The Camellia specifies three key sizes: 128, 192 and 256 bits.
+
+ See also:
+ <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
+
+config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
+ tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_CAMELLIA_X86_64
+ select CRYPTO_SIMD
+ imply CRYPTO_XTS
+ help
+ Camellia cipher algorithm module (x86_64/AES-NI/AVX).
+
+ Camellia is a symmetric key block cipher developed jointly
+ at NTT and Mitsubishi Electric Corporation.
+
+ The Camellia specifies three key sizes: 128, 192 and 256 bits.
+
+ See also:
+ <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
+
+config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
+ tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)"
+ depends on X86 && 64BIT
+ select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
+ help
+ Camellia cipher algorithm module (x86_64/AES-NI/AVX2).
+
+ Camellia is a symmetric key block cipher developed jointly
+ at NTT and Mitsubishi Electric Corporation.
+
+ The Camellia specifies three key sizes: 128, 192 and 256 bits.
+
+ See also:
+ <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
+
+config CRYPTO_CAST5_AVX_X86_64
+ tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_CAST5
+ select CRYPTO_CAST_COMMON
+ select CRYPTO_SIMD
+ imply CRYPTO_CTR
+ help
+ The CAST5 encryption algorithm (synonymous with CAST-128) is
+ described in RFC2144.
+
+ This module provides the Cast5 cipher algorithm that processes
+ sixteen blocks parallel using the AVX instruction set.
+
+config CRYPTO_CAST6_AVX_X86_64
+ tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_CAST6
+ select CRYPTO_CAST_COMMON
+ select CRYPTO_SIMD
+ imply CRYPTO_XTS
+ imply CRYPTO_CTR
+ help
+ The CAST6 encryption algorithm (synonymous with CAST-256) is
+ described in RFC2612.
+
+ This module provides the Cast6 cipher algorithm that processes
+ eight blocks parallel using the AVX instruction set.
+
+config CRYPTO_DES3_EDE_X86_64
+ tristate "Triple DES EDE cipher algorithm (x86-64)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_LIB_DES
+ imply CRYPTO_CTR
+ help
+ Triple DES EDE (FIPS 46-3) algorithm.
+
+ This module provides implementation of the Triple DES EDE cipher
+ algorithm that is optimized for x86-64 processors. Two versions of
+ algorithm are provided; regular processing one input block and
+ one that processes three blocks parallel.
+
+config CRYPTO_SERPENT_SSE2_X86_64
+ tristate "Serpent cipher algorithm (x86_64/SSE2)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_SERPENT
+ select CRYPTO_SIMD
+ imply CRYPTO_CTR
+ help
+ Serpent cipher algorithm, by Anderson, Biham & Knudsen.
+
+ Keys are allowed to be from 0 to 256 bits in length, in steps
+ of 8 bits.
+
+ This module provides Serpent cipher algorithm that processes eight
+ blocks parallel using SSE2 instruction set.
+
+ See also:
+ <https://www.cl.cam.ac.uk/~rja14/serpent.html>
+
+config CRYPTO_SERPENT_SSE2_586
+ tristate "Serpent cipher algorithm (i586/SSE2)"
+ depends on X86 && !64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_SERPENT
+ select CRYPTO_SIMD
+ imply CRYPTO_CTR
+ help
+ Serpent cipher algorithm, by Anderson, Biham & Knudsen.
+
+ Keys are allowed to be from 0 to 256 bits in length, in steps
+ of 8 bits.
+
+ This module provides Serpent cipher algorithm that processes four
+ blocks parallel using SSE2 instruction set.
+
+ See also:
+ <https://www.cl.cam.ac.uk/~rja14/serpent.html>
+
+config CRYPTO_SERPENT_AVX_X86_64
+ tristate "Serpent cipher algorithm (x86_64/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_SERPENT
+ select CRYPTO_SIMD
+ imply CRYPTO_XTS
+ imply CRYPTO_CTR
+ help
+ Serpent cipher algorithm, by Anderson, Biham & Knudsen.
+
+ Keys are allowed to be from 0 to 256 bits in length, in steps
+ of 8 bits.
+
+ This module provides the Serpent cipher algorithm that processes
+ eight blocks parallel using the AVX instruction set.
+
+ See also:
+ <https://www.cl.cam.ac.uk/~rja14/serpent.html>
+
+config CRYPTO_SERPENT_AVX2_X86_64
+ tristate "Serpent cipher algorithm (x86_64/AVX2)"
+ depends on X86 && 64BIT
+ select CRYPTO_SERPENT_AVX_X86_64
+ help
+ Serpent cipher algorithm, by Anderson, Biham & Knudsen.
+
+ Keys are allowed to be from 0 to 256 bits in length, in steps
+ of 8 bits.
+
+ This module provides Serpent cipher algorithm that processes 16
+ blocks parallel using AVX2 instruction set.
+
+ See also:
+ <https://www.cl.cam.ac.uk/~rja14/serpent.html>
+
+config CRYPTO_SM4_AESNI_AVX_X86_64
+ tristate "SM4 cipher algorithm (x86_64/AES-NI/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_SIMD
+ select CRYPTO_ALGAPI
+ select CRYPTO_SM4
+ help
+ SM4 cipher algorithms (OSCCA GB/T 32907-2016) (x86_64/AES-NI/AVX).
+
+ SM4 (GBT.32907-2016) is a cryptographic standard issued by the
+ Organization of State Commercial Administration of China (OSCCA)
+ as an authorized cryptographic algorithms for the use within China.
+
+ This is SM4 optimized implementation using AES-NI/AVX/x86_64
+ instruction set for block cipher. Through two affine transforms,
+ we can use the AES S-Box to simulate the SM4 S-Box to achieve the
+ effect of instruction acceleration.
+
+ If unsure, say N.
+
+config CRYPTO_SM4_AESNI_AVX2_X86_64
+ tristate "SM4 cipher algorithm (x86_64/AES-NI/AVX2)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_SIMD
+ select CRYPTO_ALGAPI
+ select CRYPTO_SM4
+ select CRYPTO_SM4_AESNI_AVX_X86_64
+ help
+ SM4 cipher algorithms (OSCCA GB/T 32907-2016) (x86_64/AES-NI/AVX2).
+
+ SM4 (GBT.32907-2016) is a cryptographic standard issued by the
+ Organization of State Commercial Administration of China (OSCCA)
+ as an authorized cryptographic algorithms for the use within China.
+
+ This is SM4 optimized implementation using AES-NI/AVX2/x86_64
+ instruction set for block cipher. Through two affine transforms,
+ we can use the AES S-Box to simulate the SM4 S-Box to achieve the
+ effect of instruction acceleration.
+
+ If unsure, say N.
+
+config CRYPTO_TWOFISH_586
+ tristate "Twofish cipher algorithms (i586)"
+ depends on (X86 || UML_X86) && !64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_TWOFISH_COMMON
+ imply CRYPTO_CTR
+ help
+ Twofish cipher algorithm.
+
+ Twofish was submitted as an AES (Advanced Encryption Standard)
+ candidate cipher by researchers at CounterPane Systems. It is a
+ 16 round block cipher supporting key sizes of 128, 192, and 256
+ bits.
+
+ See also:
+ <https://www.schneier.com/twofish.html>
+
+config CRYPTO_TWOFISH_X86_64
+ tristate "Twofish cipher algorithm (x86_64)"
+ depends on (X86 || UML_X86) && 64BIT
+ select CRYPTO_ALGAPI
+ select CRYPTO_TWOFISH_COMMON
+ imply CRYPTO_CTR
+ help
+ Twofish cipher algorithm (x86_64).
+
+ Twofish was submitted as an AES (Advanced Encryption Standard)
+ candidate cipher by researchers at CounterPane Systems. It is a
+ 16 round block cipher supporting key sizes of 128, 192, and 256
+ bits.
+
+ See also:
+ <https://www.schneier.com/twofish.html>
+
+config CRYPTO_TWOFISH_X86_64_3WAY
+ tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_TWOFISH_COMMON
+ select CRYPTO_TWOFISH_X86_64
+ help
+ Twofish cipher algorithm (x86_64, 3-way parallel).
+
+ Twofish was submitted as an AES (Advanced Encryption Standard)
+ candidate cipher by researchers at CounterPane Systems. It is a
+ 16 round block cipher supporting key sizes of 128, 192, and 256
+ bits.
+
+ This module provides Twofish cipher algorithm that processes three
+ blocks parallel, utilizing resources of out-of-order CPUs better.
+
+ See also:
+ <https://www.schneier.com/twofish.html>
+
+config CRYPTO_TWOFISH_AVX_X86_64
+ tristate "Twofish cipher algorithm (x86_64/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_SIMD
+ select CRYPTO_TWOFISH_COMMON
+ select CRYPTO_TWOFISH_X86_64
+ select CRYPTO_TWOFISH_X86_64_3WAY
+ imply CRYPTO_XTS
+ help
+ Twofish cipher algorithm (x86_64/AVX).
+
+ Twofish was submitted as an AES (Advanced Encryption Standard)
+ candidate cipher by researchers at CounterPane Systems. It is a
+ 16 round block cipher supporting key sizes of 128, 192, and 256
+ bits.
+
+ This module provides the Twofish cipher algorithm that processes
+ eight blocks parallel using the AVX Instruction Set.
+
+ See also:
+ <https://www.schneier.com/twofish.html>
+
+config CRYPTO_CHACHA20_X86_64
+ tristate "ChaCha stream cipher algorithms (x86_64/SSSE3/AVX2/AVX-512VL)"
+ depends on X86 && 64BIT
+ select CRYPTO_SKCIPHER
+ select CRYPTO_LIB_CHACHA_GENERIC
+ select CRYPTO_ARCH_HAVE_LIB_CHACHA
+ help
+ SSSE3, AVX2, and AVX-512VL optimized implementations of the ChaCha20,
+ XChaCha20, and XChaCha12 stream ciphers.
+
+config CRYPTO_AEGIS128_AESNI_SSE2
+ tristate "AEGIS-128 AEAD algorithm (x86_64 AESNI+SSE2 implementation)"
+ depends on X86 && 64BIT
+ select CRYPTO_AEAD
+ select CRYPTO_SIMD
+ help
+ AESNI+SSE2 implementation of the AEGIS-128 dedicated AEAD algorithm.
+
+config CRYPTO_NHPOLY1305_SSE2
+ tristate "NHPoly1305 hash function (x86_64 SSE2 implementation)"
+ depends on X86 && 64BIT
+ select CRYPTO_NHPOLY1305
+ help
+ SSE2 optimized implementation of the hash function used by the
+ Adiantum encryption mode.
+
+config CRYPTO_NHPOLY1305_AVX2
+ tristate "NHPoly1305 hash function (x86_64 AVX2 implementation)"
+ depends on X86 && 64BIT
+ select CRYPTO_NHPOLY1305
+ help
+ AVX2 optimized implementation of the hash function used by the
+ Adiantum encryption mode.
+
+config CRYPTO_BLAKE2S_X86
+ bool "BLAKE2s digest algorithm (x86 accelerated version)"
+ depends on X86 && 64BIT
+ select CRYPTO_LIB_BLAKE2S_GENERIC
+ select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
+
+config CRYPTO_POLYVAL_CLMUL_NI
+ tristate "POLYVAL hash function (CLMUL-NI accelerated)"
+ depends on X86 && 64BIT
+ select CRYPTO_POLYVAL
+ help
+ This is the x86_64 CLMUL-NI accelerated implementation of POLYVAL. It is
+ used to efficiently implement HCTR2 on x86-64 processors that support
+ carry-less multiplication instructions.
+
+config CRYPTO_POLY1305_X86_64
+ tristate "Poly1305 authenticator algorithm (x86_64/SSE2/AVX2)"
+ depends on X86 && 64BIT
+ select CRYPTO_LIB_POLY1305_GENERIC
+ select CRYPTO_ARCH_HAVE_LIB_POLY1305
+ help
+ Poly1305 authenticator algorithm, RFC7539.
+
+ Poly1305 is an authenticator algorithm designed by Daniel J. Bernstein.
+ It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use
+ in IETF protocols. This is the x86_64 assembler implementation using SIMD
+ instructions.
+
+config CRYPTO_SHA1_SSSE3
+ tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2/SHA-NI)"
+ depends on X86 && 64BIT
+ select CRYPTO_SHA1
+ select CRYPTO_HASH
+ help
+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
+ using Supplemental SSE3 (SSSE3) instructions or Advanced Vector
+ Extensions (AVX/AVX2) or SHA-NI(SHA Extensions New Instructions),
+ when available.
+
+config CRYPTO_SHA256_SSSE3
+ tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2/SHA-NI)"
+ depends on X86 && 64BIT
+ select CRYPTO_SHA256
+ select CRYPTO_HASH
+ help
+ SHA-256 secure hash standard (DFIPS 180-2) implemented
+ using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
+ Extensions version 1 (AVX1), or Advanced Vector Extensions
+ version 2 (AVX2) instructions, or SHA-NI (SHA Extensions New
+ Instructions) when available.
+
+config CRYPTO_SHA512_SSSE3
+ tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)"
+ depends on X86 && 64BIT
+ select CRYPTO_SHA512
+ select CRYPTO_HASH
+ help
+ SHA-512 secure hash standard (DFIPS 180-2) implemented
+ using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
+ Extensions version 1 (AVX1), or Advanced Vector Extensions
+ version 2 (AVX2) instructions, when available.
+
+config CRYPTO_SM3_AVX_X86_64
+ tristate "SM3 digest algorithm (x86_64/AVX)"
+ depends on X86 && 64BIT
+ select CRYPTO_HASH
+ select CRYPTO_SM3
+ help
+ SM3 secure hash function as defined by OSCCA GM/T 0004-2012 SM3).
+ It is part of the Chinese Commercial Cryptography suite. This is
+ SM3 optimized implementation using Advanced Vector Extensions (AVX)
+ when available.
+
+ If unsure, say N.
+
+config CRYPTO_GHASH_CLMUL_NI_INTEL
+ tristate "GHASH hash function (CLMUL-NI accelerated)"
+ depends on X86 && 64BIT
+ select CRYPTO_CRYPTD
+ help
+ This is the x86_64 CLMUL-NI accelerated implementation of
+ GHASH, the hash function used in GCM (Galois/Counter mode).
+
+config CRYPTO_CRC32C_INTEL
+ tristate "CRC32c INTEL hardware acceleration"
+ depends on X86
+ select CRYPTO_HASH
+ help
+ In Intel processor with SSE4.2 supported, the processor will
+ support CRC32C implementation using hardware accelerated CRC32
+ instruction. This option will create 'crc32c-intel' module,
+ which will enable any routine to use the CRC32 instruction to
+ gain performance compared with software implementation.
+ Module will be crc32c-intel.
+
+config CRYPTO_CRC32_PCLMUL
+ tristate "CRC32 PCLMULQDQ hardware acceleration"
+ depends on X86
+ select CRYPTO_HASH
+ select CRC32
+ help
+ From Intel Westmere and AMD Bulldozer processor with SSE4.2
+ and PCLMULQDQ supported, the processor will support
+ CRC32 PCLMULQDQ implementation using hardware accelerated PCLMULQDQ
+ instruction. This option will create 'crc32-pclmul' module,
+ which will enable any routine to use the CRC-32-IEEE 802.3 checksum
+ and gain better performance as compared with the table implementation.
+
+config CRYPTO_CRCT10DIF_PCLMUL
+ tristate "CRCT10DIF PCLMULQDQ hardware acceleration"
+ depends on X86 && 64BIT && CRC_T10DIF
+ select CRYPTO_HASH
+ help
+ For x86_64 processors with SSE4.2 and PCLMULQDQ supported,
+ CRC T10 DIF PCLMULQDQ computation can be hardware
+ accelerated PCLMULQDQ instruction. This option will create
+ 'crct10dif-pclmul' module, which is faster when computing the
+ crct10dif checksum as compared with the generic table implementation.
+
+endmenu
diff --git a/crypto/Kconfig b/crypto/Kconfig
index 5ea3cdb..c249fda 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -316,12 +316,6 @@
select CRYPTO_KPP
select CRYPTO_LIB_CURVE25519_GENERIC
-config CRYPTO_CURVE25519_X86
- tristate "x86_64 accelerated Curve25519 scalar multiplication library"
- depends on X86 && 64BIT
- select CRYPTO_LIB_CURVE25519_GENERIC
- select CRYPTO_ARCH_HAVE_LIB_CURVE25519
-
comment "Authenticated Encryption with Associated Data"
config CRYPTO_CCM
@@ -369,14 +363,6 @@
depends on CRYPTO_AEGIS128 && ((ARM || ARM64) && KERNEL_MODE_NEON)
default y
-config CRYPTO_AEGIS128_AESNI_SSE2
- tristate "AEGIS-128 AEAD algorithm (x86_64 AESNI+SSE2 implementation)"
- depends on X86 && 64BIT
- select CRYPTO_AEAD
- select CRYPTO_SIMD
- help
- AESNI+SSE2 implementation of the AEGIS-128 dedicated AEAD algorithm.
-
config CRYPTO_SEQIV
tristate "Sequence Number IV Generator"
select CRYPTO_AEAD
@@ -514,22 +500,6 @@
select CRYPTO_HASH
select CRYPTO_LIB_POLY1305_GENERIC
-config CRYPTO_NHPOLY1305_SSE2
- tristate "NHPoly1305 hash function (x86_64 SSE2 implementation)"
- depends on X86 && 64BIT
- select CRYPTO_NHPOLY1305
- help
- SSE2 optimized implementation of the hash function used by the
- Adiantum encryption mode.
-
-config CRYPTO_NHPOLY1305_AVX2
- tristate "NHPoly1305 hash function (x86_64 AVX2 implementation)"
- depends on X86 && 64BIT
- select CRYPTO_NHPOLY1305
- help
- AVX2 optimized implementation of the hash function used by the
- Adiantum encryption mode.
-
config CRYPTO_ADIANTUM
tristate "Adiantum support"
select CRYPTO_CHACHA20
@@ -646,18 +616,6 @@
by iSCSI for header and data digests and by others.
See Castagnoli93. Module will be crc32c.
-config CRYPTO_CRC32C_INTEL
- tristate "CRC32c INTEL hardware acceleration"
- depends on X86
- select CRYPTO_HASH
- help
- In Intel processor with SSE4.2 supported, the processor will
- support CRC32C implementation using hardware accelerated CRC32
- instruction. This option will create 'crc32c-intel' module,
- which will enable any routine to use the CRC32 instruction to
- gain performance compared with software implementation.
- Module will be crc32c-intel.
-
config CRYPTO_CRC32
tristate "CRC32 CRC algorithm"
select CRYPTO_HASH
@@ -666,19 +624,6 @@
CRC-32-IEEE 802.3 cyclic redundancy-check algorithm.
Shash crypto api wrappers to crc32_le function.
-config CRYPTO_CRC32_PCLMUL
- tristate "CRC32 PCLMULQDQ hardware acceleration"
- depends on X86
- select CRYPTO_HASH
- select CRC32
- help
- From Intel Westmere and AMD Bulldozer processor with SSE4.2
- and PCLMULQDQ supported, the processor will support
- CRC32 PCLMULQDQ implementation using hardware accelerated PCLMULQDQ
- instruction. This option will create 'crc32-pclmul' module,
- which will enable any routine to use the CRC-32-IEEE 802.3 checksum
- and gain better performance as compared with the table implementation.
-
config CRYPTO_XXHASH
tristate "xxHash hash algorithm"
select CRYPTO_HASH
@@ -704,12 +649,6 @@
See https://blake2.net for further information.
-config CRYPTO_BLAKE2S_X86
- bool "BLAKE2s digest algorithm (x86 accelerated version)"
- depends on X86 && 64BIT
- select CRYPTO_LIB_BLAKE2S_GENERIC
- select CRYPTO_ARCH_HAVE_LIB_BLAKE2S
-
config CRYPTO_CRCT10DIF
tristate "CRCT10DIF algorithm"
select CRYPTO_HASH
@@ -718,17 +657,6 @@
a crypto transform. This allows for faster crc t10 diff
transforms to be used if they are available.
-config CRYPTO_CRCT10DIF_PCLMUL
- tristate "CRCT10DIF PCLMULQDQ hardware acceleration"
- depends on X86 && 64BIT && CRC_T10DIF
- select CRYPTO_HASH
- help
- For x86_64 processors with SSE4.2 and PCLMULQDQ supported,
- CRC T10 DIF PCLMULQDQ computation can be hardware
- accelerated PCLMULQDQ instruction. This option will create
- 'crct10dif-pclmul' module, which is faster when computing the
- crct10dif checksum as compared with the generic table implementation.
-
config CRYPTO_CRC64_ROCKSOFT
tristate "Rocksoft Model CRC64 algorithm"
depends on CRC64
@@ -750,15 +678,6 @@
POLYVAL is the hash function used in HCTR2. It is not a general-purpose
cryptographic hash function.
-config CRYPTO_POLYVAL_CLMUL_NI
- tristate "POLYVAL hash function (CLMUL-NI accelerated)"
- depends on X86 && 64BIT
- select CRYPTO_POLYVAL
- help
- This is the x86_64 CLMUL-NI accelerated implementation of POLYVAL. It is
- used to efficiently implement HCTR2 on x86-64 processors that support
- carry-less multiplication instructions.
-
config CRYPTO_POLY1305
tristate "Poly1305 authenticator algorithm"
select CRYPTO_HASH
@@ -770,19 +689,6 @@
It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use
in IETF protocols. This is the portable C implementation of Poly1305.
-config CRYPTO_POLY1305_X86_64
- tristate "Poly1305 authenticator algorithm (x86_64/SSE2/AVX2)"
- depends on X86 && 64BIT
- select CRYPTO_LIB_POLY1305_GENERIC
- select CRYPTO_ARCH_HAVE_LIB_POLY1305
- help
- Poly1305 authenticator algorithm, RFC7539.
-
- Poly1305 is an authenticator algorithm designed by Daniel J. Bernstein.
- It is used for the ChaCha20-Poly1305 AEAD, specified in RFC7539 for use
- in IETF protocols. This is the x86_64 assembler implementation using SIMD
- instructions.
-
config CRYPTO_MD4
tristate "MD4 digest algorithm"
select CRYPTO_HASH
@@ -828,40 +734,6 @@
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
-config CRYPTO_SHA1_SSSE3
- tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2/SHA-NI)"
- depends on X86 && 64BIT
- select CRYPTO_SHA1
- select CRYPTO_HASH
- help
- SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
- using Supplemental SSE3 (SSSE3) instructions or Advanced Vector
- Extensions (AVX/AVX2) or SHA-NI(SHA Extensions New Instructions),
- when available.
-
-config CRYPTO_SHA256_SSSE3
- tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2/SHA-NI)"
- depends on X86 && 64BIT
- select CRYPTO_SHA256
- select CRYPTO_HASH
- help
- SHA-256 secure hash standard (DFIPS 180-2) implemented
- using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
- Extensions version 1 (AVX1), or Advanced Vector Extensions
- version 2 (AVX2) instructions, or SHA-NI (SHA Extensions New
- Instructions) when available.
-
-config CRYPTO_SHA512_SSSE3
- tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)"
- depends on X86 && 64BIT
- select CRYPTO_SHA512
- select CRYPTO_HASH
- help
- SHA-512 secure hash standard (DFIPS 180-2) implemented
- using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
- Extensions version 1 (AVX1), or Advanced Vector Extensions
- version 2 (AVX2) instructions, when available.
-
config CRYPTO_SHA256
tristate "SHA224 and SHA256 digest algorithm"
select CRYPTO_HASH
@@ -912,19 +784,6 @@
http://www.oscca.gov.cn/UpFile/20101222141857786.pdf
https://datatracker.ietf.org/doc/html/draft-shen-sm3-hash
-config CRYPTO_SM3_AVX_X86_64
- tristate "SM3 digest algorithm (x86_64/AVX)"
- depends on X86 && 64BIT
- select CRYPTO_HASH
- select CRYPTO_SM3
- help
- SM3 secure hash function as defined by OSCCA GM/T 0004-2012 SM3).
- It is part of the Chinese Commercial Cryptography suite. This is
- SM3 optimized implementation using Advanced Vector Extensions (AVX)
- when available.
-
- If unsure, say N.
-
config CRYPTO_STREEBOG
tristate "Streebog Hash Function"
select CRYPTO_HASH
@@ -949,14 +808,6 @@
See also:
<http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html>
-config CRYPTO_GHASH_CLMUL_NI_INTEL
- tristate "GHASH hash function (CLMUL-NI accelerated)"
- depends on X86 && 64BIT
- select CRYPTO_CRYPTD
- help
- This is the x86_64 CLMUL-NI accelerated implementation of
- GHASH, the hash function used in GCM (Galois/Counter mode).
-
comment "Ciphers"
config CRYPTO_AES
@@ -999,38 +850,6 @@
block. Interrupts are also disabled to avoid races where cachelines
are evicted when the CPU is interrupted to do something else.
-config CRYPTO_AES_NI_INTEL
- tristate "AES cipher algorithms (AES-NI)"
- depends on X86
- select CRYPTO_AEAD
- select CRYPTO_LIB_AES
- select CRYPTO_ALGAPI
- select CRYPTO_SKCIPHER
- select CRYPTO_SIMD
- help
- Use Intel AES-NI instructions for AES algorithm.
-
- AES cipher algorithms (FIPS-197). AES uses the Rijndael
- algorithm.
-
- Rijndael appears to be consistently a very good performer in
- both hardware and software across a wide range of computing
- environments regardless of its use in feedback or non-feedback
- modes. Its key setup time is excellent, and its key agility is
- good. Rijndael's very low memory requirements make it very well
- suited for restricted-space environments, in which it also
- demonstrates excellent performance. Rijndael's operations are
- among the easiest to defend against power and timing attacks.
-
- The AES specifies three key sizes: 128, 192 and 256 bits
-
- See <http://csrc.nist.gov/encryption/aes/> for more information.
-
- In addition to AES cipher algorithm support, the acceleration
- for some popular block cipher mode is supported too, including
- ECB, CBC, LRW, XTS. The 64 bit version has additional
- acceleration for CTR and XCTR.
-
config CRYPTO_ANUBIS
tristate "Anubis cipher algorithm"
depends on CRYPTO_USER_API_ENABLE_OBSOLETE
@@ -1082,22 +901,6 @@
See also:
<https://www.schneier.com/blowfish.html>
-config CRYPTO_BLOWFISH_X86_64
- tristate "Blowfish cipher algorithm (x86_64)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_BLOWFISH_COMMON
- imply CRYPTO_CTR
- help
- Blowfish cipher algorithm (x86_64), by Bruce Schneier.
-
- This is a variable key length cipher which can use keys from 32
- bits to 448 bits in length. It's fast, simple and specifically
- designed for use on "large microprocessors".
-
- See also:
- <https://www.schneier.com/blowfish.html>
-
config CRYPTO_CAMELLIA
tristate "Camellia cipher algorithms"
select CRYPTO_ALGAPI
@@ -1112,55 +915,6 @@
See also:
<https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
-config CRYPTO_CAMELLIA_X86_64
- tristate "Camellia cipher algorithm (x86_64)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- imply CRYPTO_CTR
- help
- Camellia cipher algorithm module (x86_64).
-
- Camellia is a symmetric key block cipher developed jointly
- at NTT and Mitsubishi Electric Corporation.
-
- The Camellia specifies three key sizes: 128, 192 and 256 bits.
-
- See also:
- <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
-
-config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
- tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_CAMELLIA_X86_64
- select CRYPTO_SIMD
- imply CRYPTO_XTS
- help
- Camellia cipher algorithm module (x86_64/AES-NI/AVX).
-
- Camellia is a symmetric key block cipher developed jointly
- at NTT and Mitsubishi Electric Corporation.
-
- The Camellia specifies three key sizes: 128, 192 and 256 bits.
-
- See also:
- <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
-
-config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
- tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)"
- depends on X86 && 64BIT
- select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
- help
- Camellia cipher algorithm module (x86_64/AES-NI/AVX2).
-
- Camellia is a symmetric key block cipher developed jointly
- at NTT and Mitsubishi Electric Corporation.
-
- The Camellia specifies three key sizes: 128, 192 and 256 bits.
-
- See also:
- <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
-
config CRYPTO_CAST_COMMON
tristate
help
@@ -1175,21 +929,6 @@
The CAST5 encryption algorithm (synonymous with CAST-128) is
described in RFC2144.
-config CRYPTO_CAST5_AVX_X86_64
- tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_CAST5
- select CRYPTO_CAST_COMMON
- select CRYPTO_SIMD
- imply CRYPTO_CTR
- help
- The CAST5 encryption algorithm (synonymous with CAST-128) is
- described in RFC2144.
-
- This module provides the Cast5 cipher algorithm that processes
- sixteen blocks parallel using the AVX instruction set.
-
config CRYPTO_CAST6
tristate "CAST6 (CAST-256) cipher algorithm"
select CRYPTO_ALGAPI
@@ -1198,22 +937,6 @@
The CAST6 encryption algorithm (synonymous with CAST-256) is
described in RFC2612.
-config CRYPTO_CAST6_AVX_X86_64
- tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_CAST6
- select CRYPTO_CAST_COMMON
- select CRYPTO_SIMD
- imply CRYPTO_XTS
- imply CRYPTO_CTR
- help
- The CAST6 encryption algorithm (synonymous with CAST-256) is
- described in RFC2612.
-
- This module provides the Cast6 cipher algorithm that processes
- eight blocks parallel using the AVX instruction set.
-
config CRYPTO_DES
tristate "DES and Triple DES EDE cipher algorithms"
select CRYPTO_ALGAPI
@@ -1221,20 +944,6 @@
help
DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
-config CRYPTO_DES3_EDE_X86_64
- tristate "Triple DES EDE cipher algorithm (x86-64)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_LIB_DES
- imply CRYPTO_CTR
- help
- Triple DES EDE (FIPS 46-3) algorithm.
-
- This module provides implementation of the Triple DES EDE cipher
- algorithm that is optimized for x86-64 processors. Two versions of
- algorithm are provided; regular processing one input block and
- one that processes three blocks parallel.
-
config CRYPTO_FCRYPT
tristate "FCrypt cipher algorithm"
select CRYPTO_ALGAPI
@@ -1278,16 +987,6 @@
reduced security margin but increased performance. It can be needed
in some performance-sensitive scenarios.
-config CRYPTO_CHACHA20_X86_64
- tristate "ChaCha stream cipher algorithms (x86_64/SSSE3/AVX2/AVX-512VL)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_LIB_CHACHA_GENERIC
- select CRYPTO_ARCH_HAVE_LIB_CHACHA
- help
- SSSE3, AVX2, and AVX-512VL optimized implementations of the ChaCha20,
- XChaCha20, and XChaCha12 stream ciphers.
-
config CRYPTO_SEED
tristate "SEED cipher algorithm"
depends on CRYPTO_USER_API_ENABLE_OBSOLETE
@@ -1330,80 +1029,6 @@
See also:
<https://www.cl.cam.ac.uk/~rja14/serpent.html>
-config CRYPTO_SERPENT_SSE2_X86_64
- tristate "Serpent cipher algorithm (x86_64/SSE2)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_SERPENT
- select CRYPTO_SIMD
- imply CRYPTO_CTR
- help
- Serpent cipher algorithm, by Anderson, Biham & Knudsen.
-
- Keys are allowed to be from 0 to 256 bits in length, in steps
- of 8 bits.
-
- This module provides Serpent cipher algorithm that processes eight
- blocks parallel using SSE2 instruction set.
-
- See also:
- <https://www.cl.cam.ac.uk/~rja14/serpent.html>
-
-config CRYPTO_SERPENT_SSE2_586
- tristate "Serpent cipher algorithm (i586/SSE2)"
- depends on X86 && !64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_SERPENT
- select CRYPTO_SIMD
- imply CRYPTO_CTR
- help
- Serpent cipher algorithm, by Anderson, Biham & Knudsen.
-
- Keys are allowed to be from 0 to 256 bits in length, in steps
- of 8 bits.
-
- This module provides Serpent cipher algorithm that processes four
- blocks parallel using SSE2 instruction set.
-
- See also:
- <https://www.cl.cam.ac.uk/~rja14/serpent.html>
-
-config CRYPTO_SERPENT_AVX_X86_64
- tristate "Serpent cipher algorithm (x86_64/AVX)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_SERPENT
- select CRYPTO_SIMD
- imply CRYPTO_XTS
- imply CRYPTO_CTR
- help
- Serpent cipher algorithm, by Anderson, Biham & Knudsen.
-
- Keys are allowed to be from 0 to 256 bits in length, in steps
- of 8 bits.
-
- This module provides the Serpent cipher algorithm that processes
- eight blocks parallel using the AVX instruction set.
-
- See also:
- <https://www.cl.cam.ac.uk/~rja14/serpent.html>
-
-config CRYPTO_SERPENT_AVX2_X86_64
- tristate "Serpent cipher algorithm (x86_64/AVX2)"
- depends on X86 && 64BIT
- select CRYPTO_SERPENT_AVX_X86_64
- help
- Serpent cipher algorithm, by Anderson, Biham & Knudsen.
-
- Keys are allowed to be from 0 to 256 bits in length, in steps
- of 8 bits.
-
- This module provides Serpent cipher algorithm that processes 16
- blocks parallel using AVX2 instruction set.
-
- See also:
- <https://www.cl.cam.ac.uk/~rja14/serpent.html>
-
config CRYPTO_SM4
tristate
@@ -1433,49 +1058,6 @@
If unsure, say N.
-config CRYPTO_SM4_AESNI_AVX_X86_64
- tristate "SM4 cipher algorithm (x86_64/AES-NI/AVX)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_SIMD
- select CRYPTO_ALGAPI
- select CRYPTO_SM4
- help
- SM4 cipher algorithms (OSCCA GB/T 32907-2016) (x86_64/AES-NI/AVX).
-
- SM4 (GBT.32907-2016) is a cryptographic standard issued by the
- Organization of State Commercial Administration of China (OSCCA)
- as an authorized cryptographic algorithms for the use within China.
-
- This is SM4 optimized implementation using AES-NI/AVX/x86_64
- instruction set for block cipher. Through two affine transforms,
- we can use the AES S-Box to simulate the SM4 S-Box to achieve the
- effect of instruction acceleration.
-
- If unsure, say N.
-
-config CRYPTO_SM4_AESNI_AVX2_X86_64
- tristate "SM4 cipher algorithm (x86_64/AES-NI/AVX2)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_SIMD
- select CRYPTO_ALGAPI
- select CRYPTO_SM4
- select CRYPTO_SM4_AESNI_AVX_X86_64
- help
- SM4 cipher algorithms (OSCCA GB/T 32907-2016) (x86_64/AES-NI/AVX2).
-
- SM4 (GBT.32907-2016) is a cryptographic standard issued by the
- Organization of State Commercial Administration of China (OSCCA)
- as an authorized cryptographic algorithms for the use within China.
-
- This is SM4 optimized implementation using AES-NI/AVX2/x86_64
- instruction set for block cipher. Through two affine transforms,
- we can use the AES S-Box to simulate the SM4 S-Box to achieve the
- effect of instruction acceleration.
-
- If unsure, say N.
-
config CRYPTO_TEA
tristate "TEA, XTEA and XETA cipher algorithms"
depends on CRYPTO_USER_API_ENABLE_OBSOLETE
@@ -1515,83 +1097,6 @@
Common parts of the Twofish cipher algorithm shared by the
generic c and the assembler implementations.
-config CRYPTO_TWOFISH_586
- tristate "Twofish cipher algorithms (i586)"
- depends on (X86 || UML_X86) && !64BIT
- select CRYPTO_ALGAPI
- select CRYPTO_TWOFISH_COMMON
- imply CRYPTO_CTR
- help
- Twofish cipher algorithm.
-
- Twofish was submitted as an AES (Advanced Encryption Standard)
- candidate cipher by researchers at CounterPane Systems. It is a
- 16 round block cipher supporting key sizes of 128, 192, and 256
- bits.
-
- See also:
- <https://www.schneier.com/twofish.html>
-
-config CRYPTO_TWOFISH_X86_64
- tristate "Twofish cipher algorithm (x86_64)"
- depends on (X86 || UML_X86) && 64BIT
- select CRYPTO_ALGAPI
- select CRYPTO_TWOFISH_COMMON
- imply CRYPTO_CTR
- help
- Twofish cipher algorithm (x86_64).
-
- Twofish was submitted as an AES (Advanced Encryption Standard)
- candidate cipher by researchers at CounterPane Systems. It is a
- 16 round block cipher supporting key sizes of 128, 192, and 256
- bits.
-
- See also:
- <https://www.schneier.com/twofish.html>
-
-config CRYPTO_TWOFISH_X86_64_3WAY
- tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_TWOFISH_COMMON
- select CRYPTO_TWOFISH_X86_64
- help
- Twofish cipher algorithm (x86_64, 3-way parallel).
-
- Twofish was submitted as an AES (Advanced Encryption Standard)
- candidate cipher by researchers at CounterPane Systems. It is a
- 16 round block cipher supporting key sizes of 128, 192, and 256
- bits.
-
- This module provides Twofish cipher algorithm that processes three
- blocks parallel, utilizing resources of out-of-order CPUs better.
-
- See also:
- <https://www.schneier.com/twofish.html>
-
-config CRYPTO_TWOFISH_AVX_X86_64
- tristate "Twofish cipher algorithm (x86_64/AVX)"
- depends on X86 && 64BIT
- select CRYPTO_SKCIPHER
- select CRYPTO_SIMD
- select CRYPTO_TWOFISH_COMMON
- select CRYPTO_TWOFISH_X86_64
- select CRYPTO_TWOFISH_X86_64_3WAY
- imply CRYPTO_XTS
- help
- Twofish cipher algorithm (x86_64/AVX).
-
- Twofish was submitted as an AES (Advanced Encryption Standard)
- candidate cipher by researchers at CounterPane Systems. It is a
- 16 round block cipher supporting key sizes of 128, 192, and 256
- bits.
-
- This module provides the Twofish cipher algorithm that processes
- eight blocks parallel using the AVX Instruction Set.
-
- See also:
- <https://www.schneier.com/twofish.html>
-
comment "Compression"
config CRYPTO_DEFLATE
@@ -1799,6 +1304,9 @@
if SPARC
source "arch/sparc/crypto/Kconfig"
endif
+if X86
+source "arch/x86/crypto/Kconfig"
+endif
source "drivers/crypto/Kconfig"
source "crypto/asymmetric_keys/Kconfig"
