| /* SPDX-License-Identifier: GPL-2.0-only */ |
| #include <asm/asm-offsets.h> |
| #include <asm/cache.h> |
| #include <asm/code-patching-asm.h> |
| #include <asm/exception-64s.h> |
| #include <asm/export.h> |
| #include <asm/kvm_asm.h> |
| #include <asm/kvm_book3s_asm.h> |
| #include <asm/mmu.h> |
| #include <asm/ppc_asm.h> |
| #include <asm/ptrace.h> |
| #include <asm/reg.h> |
| #include <asm/ultravisor-api.h> |
| |
| /* |
| * These are branched to from interrupt handlers in exception-64s.S which set |
| * IKVM_REAL or IKVM_VIRT, if HSTATE_IN_GUEST was found to be non-zero. |
| */ |
| |
| /* |
| * This is a hcall, so register convention is as |
| * Documentation/powerpc/papr_hcalls.rst. |
| * |
| * This may also be a syscall from PR-KVM userspace that is to be |
| * reflected to the PR guest kernel, so registers may be set up for |
| * a system call rather than hcall. We don't currently clobber |
| * anything here, but the 0xc00 handler has already clobbered CTR |
| * and CR0, so PR-KVM can not support a guest kernel that preserves |
| * those registers across its system calls. |
| * |
| * The state of registers is as kvmppc_interrupt, except CFAR is not |
| * saved, R13 is not in SCRATCH0, and R10 does not contain the trap. |
| */ |
| .global kvmppc_hcall |
| .balign IFETCH_ALIGN_BYTES |
| kvmppc_hcall: |
| #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE |
| lbz r10,HSTATE_IN_GUEST(r13) |
| cmpwi r10,KVM_GUEST_MODE_HV_P9 |
| beq kvmppc_p9_exit_hcall |
| #endif |
| ld r10,PACA_EXGEN+EX_R13(r13) |
| SET_SCRATCH0(r10) |
| li r10,0xc00 |
| /* Now we look like kvmppc_interrupt */ |
| li r11,PACA_EXGEN |
| b .Lgot_save_area |
| |
| /* |
| * KVM interrupt entry occurs after GEN_INT_ENTRY runs, and follows that |
| * call convention: |
| * |
| * guest R9-R13, CTR, CFAR, PPR saved in PACA EX_xxx save area |
| * guest (H)DAR, (H)DSISR are also in the save area for relevant interrupts |
| * guest R13 also saved in SCRATCH0 |
| * R13 = PACA |
| * R11 = (H)SRR0 |
| * R12 = (H)SRR1 |
| * R9 = guest CR |
| * PPR is set to medium |
| * |
| * With the addition for KVM: |
| * R10 = trap vector |
| */ |
| .global kvmppc_interrupt |
| .balign IFETCH_ALIGN_BYTES |
| kvmppc_interrupt: |
| #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE |
| std r10,HSTATE_SCRATCH0(r13) |
| lbz r10,HSTATE_IN_GUEST(r13) |
| cmpwi r10,KVM_GUEST_MODE_HV_P9 |
| beq kvmppc_p9_exit_interrupt |
| ld r10,HSTATE_SCRATCH0(r13) |
| #endif |
| li r11,PACA_EXGEN |
| cmpdi r10,0x200 |
| bgt+ .Lgot_save_area |
| li r11,PACA_EXMC |
| beq .Lgot_save_area |
| li r11,PACA_EXNMI |
| .Lgot_save_area: |
| add r11,r11,r13 |
| BEGIN_FTR_SECTION |
| ld r12,EX_CFAR(r11) |
| std r12,HSTATE_CFAR(r13) |
| END_FTR_SECTION_IFSET(CPU_FTR_CFAR) |
| ld r12,EX_CTR(r11) |
| mtctr r12 |
| BEGIN_FTR_SECTION |
| ld r12,EX_PPR(r11) |
| std r12,HSTATE_PPR(r13) |
| END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) |
| ld r12,EX_R12(r11) |
| std r12,HSTATE_SCRATCH0(r13) |
| sldi r12,r9,32 |
| or r12,r12,r10 |
| ld r9,EX_R9(r11) |
| ld r10,EX_R10(r11) |
| ld r11,EX_R11(r11) |
| |
| /* |
| * Hcalls and other interrupts come here after normalising register |
| * contents and save locations: |
| * |
| * R12 = (guest CR << 32) | interrupt vector |
| * R13 = PACA |
| * guest R12 saved in shadow HSTATE_SCRATCH0 |
| * guest R13 saved in SPRN_SCRATCH0 |
| */ |
| std r9,HSTATE_SCRATCH2(r13) |
| lbz r9,HSTATE_IN_GUEST(r13) |
| cmpwi r9,KVM_GUEST_MODE_SKIP |
| beq- .Lmaybe_skip |
| .Lno_skip: |
| #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE |
| #ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE |
| cmpwi r9,KVM_GUEST_MODE_GUEST |
| beq kvmppc_interrupt_pr |
| #endif |
| b kvmppc_interrupt_hv |
| #else |
| b kvmppc_interrupt_pr |
| #endif |
| |
| /* |
| * "Skip" interrupts are part of a trick KVM uses a with hash guests to load |
| * the faulting instruction in guest memory from the hypervisor without |
| * walking page tables. |
| * |
| * When the guest takes a fault that requires the hypervisor to load the |
| * instruction (e.g., MMIO emulation), KVM is running in real-mode with HV=1 |
| * and the guest MMU context loaded. It sets KVM_GUEST_MODE_SKIP, and sets |
| * MSR[DR]=1 while leaving MSR[IR]=0, so it continues to fetch HV instructions |
| * but loads and stores will access the guest context. This is used to load |
| * the faulting instruction using the faulting guest effective address. |
| * |
| * However the guest context may not be able to translate, or it may cause a |
| * machine check or other issue, which results in a fault in the host |
| * (even with KVM-HV). |
| * |
| * These faults come here because KVM_GUEST_MODE_SKIP was set, so if they |
| * are (or are likely) caused by that load, the instruction is skipped by |
| * just returning with the PC advanced +4, where it is noticed the load did |
| * not execute and it goes to the slow path which walks the page tables to |
| * read guest memory. |
| */ |
| .Lmaybe_skip: |
| cmpwi r12,BOOK3S_INTERRUPT_MACHINE_CHECK |
| beq 1f |
| cmpwi r12,BOOK3S_INTERRUPT_DATA_STORAGE |
| beq 1f |
| cmpwi r12,BOOK3S_INTERRUPT_DATA_SEGMENT |
| beq 1f |
| #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE |
| /* HSRR interrupts get 2 added to interrupt number */ |
| cmpwi r12,BOOK3S_INTERRUPT_H_DATA_STORAGE | 0x2 |
| beq 2f |
| #endif |
| b .Lno_skip |
| 1: mfspr r9,SPRN_SRR0 |
| addi r9,r9,4 |
| mtspr SPRN_SRR0,r9 |
| ld r12,HSTATE_SCRATCH0(r13) |
| ld r9,HSTATE_SCRATCH2(r13) |
| GET_SCRATCH0(r13) |
| RFI_TO_KERNEL |
| #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE |
| 2: mfspr r9,SPRN_HSRR0 |
| addi r9,r9,4 |
| mtspr SPRN_HSRR0,r9 |
| ld r12,HSTATE_SCRATCH0(r13) |
| ld r9,HSTATE_SCRATCH2(r13) |
| GET_SCRATCH0(r13) |
| HRFI_TO_KERNEL |
| #endif |
| |
| #ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE |
| |
| /* Stack frame offsets for kvmppc_p9_enter_guest */ |
| #define SFS (144 + STACK_FRAME_MIN_SIZE) |
| #define STACK_SLOT_NVGPRS (SFS - 144) /* 18 gprs */ |
| |
| /* |
| * void kvmppc_p9_enter_guest(struct vcpu *vcpu); |
| * |
| * Enter the guest on a ISAv3.0 or later system. |
| */ |
| .balign IFETCH_ALIGN_BYTES |
| _GLOBAL(kvmppc_p9_enter_guest) |
| EXPORT_SYMBOL_GPL(kvmppc_p9_enter_guest) |
| mflr r0 |
| std r0,PPC_LR_STKOFF(r1) |
| stdu r1,-SFS(r1) |
| |
| std r1,HSTATE_HOST_R1(r13) |
| |
| mfcr r4 |
| stw r4,SFS+8(r1) |
| |
| reg = 14 |
| .rept 18 |
| std reg,STACK_SLOT_NVGPRS + ((reg - 14) * 8)(r1) |
| reg = reg + 1 |
| .endr |
| |
| ld r4,VCPU_LR(r3) |
| mtlr r4 |
| ld r4,VCPU_CTR(r3) |
| mtctr r4 |
| ld r4,VCPU_XER(r3) |
| mtspr SPRN_XER,r4 |
| |
| ld r1,VCPU_CR(r3) |
| |
| BEGIN_FTR_SECTION |
| ld r4,VCPU_CFAR(r3) |
| mtspr SPRN_CFAR,r4 |
| END_FTR_SECTION_IFSET(CPU_FTR_CFAR) |
| BEGIN_FTR_SECTION |
| ld r4,VCPU_PPR(r3) |
| mtspr SPRN_PPR,r4 |
| END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR) |
| |
| reg = 4 |
| .rept 28 |
| ld reg,__VCPU_GPR(reg)(r3) |
| reg = reg + 1 |
| .endr |
| |
| ld r4,VCPU_KVM(r3) |
| lbz r4,KVM_SECURE_GUEST(r4) |
| cmpdi r4,0 |
| ld r4,VCPU_GPR(R4)(r3) |
| bne .Lret_to_ultra |
| |
| mtcr r1 |
| |
| ld r0,VCPU_GPR(R0)(r3) |
| ld r1,VCPU_GPR(R1)(r3) |
| ld r2,VCPU_GPR(R2)(r3) |
| ld r3,VCPU_GPR(R3)(r3) |
| |
| HRFI_TO_GUEST |
| b . |
| |
| /* |
| * Use UV_RETURN ultracall to return control back to the Ultravisor |
| * after processing an hypercall or interrupt that was forwarded |
| * (a.k.a. reflected) to the Hypervisor. |
| * |
| * All registers have already been reloaded except the ucall requires: |
| * R0 = hcall result |
| * R2 = SRR1, so UV can detect a synthesized interrupt (if any) |
| * R3 = UV_RETURN |
| */ |
| .Lret_to_ultra: |
| mtcr r1 |
| ld r1,VCPU_GPR(R1)(r3) |
| |
| ld r0,VCPU_GPR(R3)(r3) |
| mfspr r2,SPRN_SRR1 |
| LOAD_REG_IMMEDIATE(r3, UV_RETURN) |
| sc 2 |
| |
| /* |
| * kvmppc_p9_exit_hcall and kvmppc_p9_exit_interrupt are branched to from |
| * above if the interrupt was taken for a guest that was entered via |
| * kvmppc_p9_enter_guest(). |
| * |
| * The exit code recovers the host stack and vcpu pointer, saves all guest GPRs |
| * and CR, LR, XER as well as guest MSR and NIA into the VCPU, then re- |
| * establishes the host stack and registers to return from the |
| * kvmppc_p9_enter_guest() function, which saves CTR and other guest registers |
| * (SPRs and FP, VEC, etc). |
| */ |
| .balign IFETCH_ALIGN_BYTES |
| kvmppc_p9_exit_hcall: |
| mfspr r11,SPRN_SRR0 |
| mfspr r12,SPRN_SRR1 |
| li r10,0xc00 |
| std r10,HSTATE_SCRATCH0(r13) |
| |
| .balign IFETCH_ALIGN_BYTES |
| kvmppc_p9_exit_interrupt: |
| /* |
| * If set to KVM_GUEST_MODE_HV_P9 but we're still in the |
| * hypervisor, that means we can't return from the entry stack. |
| */ |
| rldicl. r10,r12,64-MSR_HV_LG,63 |
| bne- kvmppc_p9_bad_interrupt |
| |
| std r1,HSTATE_SCRATCH1(r13) |
| std r3,HSTATE_SCRATCH2(r13) |
| ld r1,HSTATE_HOST_R1(r13) |
| ld r3,HSTATE_KVM_VCPU(r13) |
| |
| std r9,VCPU_CR(r3) |
| |
| 1: |
| std r11,VCPU_PC(r3) |
| std r12,VCPU_MSR(r3) |
| |
| reg = 14 |
| .rept 18 |
| std reg,__VCPU_GPR(reg)(r3) |
| reg = reg + 1 |
| .endr |
| |
| /* r1, r3, r9-r13 are saved to vcpu by C code */ |
| std r0,VCPU_GPR(R0)(r3) |
| std r2,VCPU_GPR(R2)(r3) |
| reg = 4 |
| .rept 5 |
| std reg,__VCPU_GPR(reg)(r3) |
| reg = reg + 1 |
| .endr |
| |
| ld r2,PACATOC(r13) |
| |
| mflr r4 |
| std r4,VCPU_LR(r3) |
| mfspr r4,SPRN_XER |
| std r4,VCPU_XER(r3) |
| |
| reg = 14 |
| .rept 18 |
| ld reg,STACK_SLOT_NVGPRS + ((reg - 14) * 8)(r1) |
| reg = reg + 1 |
| .endr |
| |
| lwz r4,SFS+8(r1) |
| mtcr r4 |
| |
| /* |
| * Flush the link stack here, before executing the first blr on the |
| * way out of the guest. |
| * |
| * The link stack won't match coming out of the guest anyway so the |
| * only cost is the flush itself. The call clobbers r0. |
| */ |
| 1: nop |
| patch_site 1b patch__call_kvm_flush_link_stack_p9 |
| |
| addi r1,r1,SFS |
| ld r0,PPC_LR_STKOFF(r1) |
| mtlr r0 |
| blr |
| |
| /* |
| * Took an interrupt somewhere right before HRFID to guest, so registers are |
| * in a bad way. Return things hopefully enough to run host virtual code and |
| * run the Linux interrupt handler (SRESET or MCE) to print something useful. |
| * |
| * We could be really clever and save all host registers in known locations |
| * before setting HSTATE_IN_GUEST, then restoring them all here, and setting |
| * return address to a fixup that sets them up again. But that's a lot of |
| * effort for a small bit of code. Lots of other things to do first. |
| */ |
| kvmppc_p9_bad_interrupt: |
| BEGIN_MMU_FTR_SECTION |
| /* |
| * Hash host doesn't try to recover MMU (requires host SLB reload) |
| */ |
| b . |
| END_MMU_FTR_SECTION_IFCLR(MMU_FTR_TYPE_RADIX) |
| /* |
| * Clean up guest registers to give host a chance to run. |
| */ |
| li r10,0 |
| mtspr SPRN_AMR,r10 |
| mtspr SPRN_IAMR,r10 |
| mtspr SPRN_CIABR,r10 |
| mtspr SPRN_DAWRX0,r10 |
| BEGIN_FTR_SECTION |
| mtspr SPRN_DAWRX1,r10 |
| END_FTR_SECTION_IFSET(CPU_FTR_DAWR1) |
| |
| /* |
| * Switch to host MMU mode (don't have the real host PID but we aren't |
| * going back to userspace). |
| */ |
| hwsync |
| isync |
| |
| mtspr SPRN_PID,r10 |
| |
| ld r10, HSTATE_KVM_VCPU(r13) |
| ld r10, VCPU_KVM(r10) |
| lwz r10, KVM_HOST_LPID(r10) |
| mtspr SPRN_LPID,r10 |
| |
| ld r10, HSTATE_KVM_VCPU(r13) |
| ld r10, VCPU_KVM(r10) |
| ld r10, KVM_HOST_LPCR(r10) |
| mtspr SPRN_LPCR,r10 |
| |
| isync |
| |
| /* |
| * Set GUEST_MODE_NONE so the handler won't branch to KVM, and clear |
| * MSR_RI in r12 ([H]SRR1) so the handler won't try to return. |
| */ |
| li r10,KVM_GUEST_MODE_NONE |
| stb r10,HSTATE_IN_GUEST(r13) |
| li r10,MSR_RI |
| andc r12,r12,r10 |
| |
| /* |
| * Go back to interrupt handler. MCE and SRESET have their specific |
| * PACA save area so they should be used directly. They set up their |
| * own stack. The other handlers all use EXGEN. They will use the |
| * guest r1 if it looks like a kernel stack, so just load the |
| * emergency stack and go to program check for all other interrupts. |
| */ |
| ld r10,HSTATE_SCRATCH0(r13) |
| cmpwi r10,BOOK3S_INTERRUPT_MACHINE_CHECK |
| beq .Lcall_machine_check_common |
| |
| cmpwi r10,BOOK3S_INTERRUPT_SYSTEM_RESET |
| beq .Lcall_system_reset_common |
| |
| b . |
| |
| .Lcall_machine_check_common: |
| b machine_check_common |
| |
| .Lcall_system_reset_common: |
| b system_reset_common |
| #endif |