blob: ce8da64022b43e7323a49b0a3be5a7ecf86a3691 [file] [log] [blame]
/*
* Copyright (C) 2013, NVIDIA Corporation. All rights reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sub license,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#ifndef __DRM_PANEL_H__
#define __DRM_PANEL_H__
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/list.h>
struct device_node;
struct drm_connector;
struct drm_device;
struct drm_panel;
struct display_timing;
/**
* struct drm_panel_funcs - perform operations on a given panel
*
* The .prepare() function is typically called before the display controller
* starts to transmit video data. Panel drivers can use this to turn the panel
* on and wait for it to become ready. If additional configuration is required
* (via a control bus such as I2C, SPI or DSI for example) this is a good time
* to do that.
*
* After the display controller has started transmitting video data, it's safe
* to call the .enable() function. This will typically enable the backlight to
* make the image on screen visible. Some panels require a certain amount of
* time or frames before the image is displayed. This function is responsible
* for taking this into account before enabling the backlight to avoid visual
* glitches.
*
* Before stopping video transmission from the display controller it can be
* necessary to turn off the panel to avoid visual glitches. This is done in
* the .disable() function. Analogously to .enable() this typically involves
* turning off the backlight and waiting for some time to make sure no image
* is visible on the panel. It is then safe for the display controller to
* cease transmission of video data.
*
* To save power when no video data is transmitted, a driver can power down
* the panel. This is the job of the .unprepare() function.
*/
struct drm_panel_funcs {
/**
* @prepare:
*
* Turn on panel and perform set up.
*/
int (*prepare)(struct drm_panel *panel);
/**
* @enable:
*
* Enable panel (turn on back light, etc.).
*/
int (*enable)(struct drm_panel *panel);
/**
* @disable:
*
* Disable panel (turn off back light, etc.).
*/
int (*disable)(struct drm_panel *panel);
/**
* @unprepare:
*
* Turn off panel.
*/
int (*unprepare)(struct drm_panel *panel);
/**
* @get_modes:
*
* Add modes to the connector that the panel is attached to and
* return the number of modes added.
*/
int (*get_modes)(struct drm_panel *panel);
/**
* @get_timings:
*
* Copy display timings into the provided array and return
* the number of display timings available.
*/
int (*get_timings)(struct drm_panel *panel, unsigned int num_timings,
struct display_timing *timings);
};
/**
* struct drm_panel - DRM panel object
*/
struct drm_panel {
/**
* @drm:
*
* DRM device owning the panel.
*/
struct drm_device *drm;
/**
* @connector:
*
* DRM connector that the panel is attached to.
*/
struct drm_connector *connector;
/**
* @dev:
*
* Parent device of the panel.
*/
struct device *dev;
/**
* @funcs:
*
* Operations that can be performed on the panel.
*/
const struct drm_panel_funcs *funcs;
/**
* @connector_type:
*
* Type of the panel as a DRM_MODE_CONNECTOR_* value. This is used to
* initialise the drm_connector corresponding to the panel with the
* correct connector type.
*/
int connector_type;
/**
* @list:
*
* Panel entry in registry.
*/
struct list_head list;
};
void drm_panel_init(struct drm_panel *panel, struct device *dev,
const struct drm_panel_funcs *funcs,
int connector_type);
int drm_panel_add(struct drm_panel *panel);
void drm_panel_remove(struct drm_panel *panel);
int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector);
void drm_panel_detach(struct drm_panel *panel);
int drm_panel_prepare(struct drm_panel *panel);
int drm_panel_unprepare(struct drm_panel *panel);
int drm_panel_enable(struct drm_panel *panel);
int drm_panel_disable(struct drm_panel *panel);
int drm_panel_get_modes(struct drm_panel *panel);
#if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
struct drm_panel *of_drm_find_panel(const struct device_node *np);
#else
static inline struct drm_panel *of_drm_find_panel(const struct device_node *np)
{
return ERR_PTR(-ENODEV);
}
#endif
#endif