blob: 7d942f71e5328f446eff418623ec61392186d014 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only
config QCOM_TSENS
tristate "Qualcomm TSENS Temperature Alarm"
depends on QCOM_QFPROM
depends on ARCH_QCOM || COMPILE_TEST
help
This enables the thermal sysfs driver for the TSENS device. It shows
up in Sysfs as a thermal zone with multiple trip points. Disabling the
thermal zone device via the mode file results in disabling the sensor.
Also able to set threshold temperature for both hot and cold and update
when a threshold is reached.
config QCOM_SPMI_ADC_TM5
tristate "Qualcomm SPMI PMIC Thermal Monitor ADC5"
depends on OF && SPMI && IIO
select REGMAP_SPMI
select QCOM_VADC_COMMON
help
This enables the thermal driver for the ADC thermal monitoring
device. It shows up as a thermal zone with multiple trip points.
Thermal client sets threshold temperature for both warm and cool and
gets updated when a threshold is reached.
config QCOM_SPMI_TEMP_ALARM
tristate "Qualcomm SPMI PMIC Temperature Alarm"
depends on OF && SPMI && IIO
select REGMAP_SPMI
help
This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP)
PMIC devices. It shows up in sysfs as a thermal sensor with multiple
trip points. The temperature reported by the thermal sensor reflects the
real time die temperature if an ADC is present or an estimate of the
temperature based upon the over temperature stage value.
config QCOM_LMH
tristate "Qualcomm Limits Management Hardware"
depends on ARCH_QCOM
help
This enables initialization of Qualcomm limits management
hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on
input from temperature and current sensors. On many newer Qualcomm SoCs
LMh is configured in the firmware and this feature need not be enabled.
However, on certain SoCs like sdm845 LMh has to be configured from kernel.