| #!/bin/bash |
| # SPDX-License-Identifier: GPL-2.0 |
| # |
| # Various combinations of VRF with xfrms and qdisc. |
| |
| # Kselftest framework requirement - SKIP code is 4. |
| ksft_skip=4 |
| |
| PAUSE_ON_FAIL=no |
| VERBOSE=0 |
| ret=0 |
| |
| HOST1_4=192.168.1.1 |
| HOST2_4=192.168.1.2 |
| HOST1_6=2001:db8:1::1 |
| HOST2_6=2001:db8:1::2 |
| |
| XFRM1_4=10.0.1.1 |
| XFRM2_4=10.0.1.2 |
| XFRM1_6=fc00:1000::1 |
| XFRM2_6=fc00:1000::2 |
| IF_ID=123 |
| |
| VRF=red |
| TABLE=300 |
| |
| AUTH_1=0xd94fcfea65fddf21dc6e0d24a0253508 |
| AUTH_2=0xdc6e0d24a0253508d94fcfea65fddf21 |
| ENC_1=0xfc46c20f8048be9725930ff3fb07ac2a91f0347dffeacf62 |
| ENC_2=0x3fb07ac2a91f0347dffeacf62fc46c20f8048be9725930ff |
| SPI_1=0x02122b77 |
| SPI_2=0x2b770212 |
| |
| which ping6 > /dev/null 2>&1 && ping6=$(which ping6) || ping6=$(which ping) |
| |
| ################################################################################ |
| # |
| log_test() |
| { |
| local rc=$1 |
| local expected=$2 |
| local msg="$3" |
| |
| if [ ${rc} -eq ${expected} ]; then |
| printf "TEST: %-60s [ OK ]\n" "${msg}" |
| nsuccess=$((nsuccess+1)) |
| else |
| ret=1 |
| nfail=$((nfail+1)) |
| printf "TEST: %-60s [FAIL]\n" "${msg}" |
| if [ "${PAUSE_ON_FAIL}" = "yes" ]; then |
| echo |
| echo "hit enter to continue, 'q' to quit" |
| read a |
| [ "$a" = "q" ] && exit 1 |
| fi |
| fi |
| } |
| |
| run_cmd_host1() |
| { |
| local cmd="$*" |
| local out |
| local rc |
| |
| if [ "$VERBOSE" = "1" ]; then |
| printf " COMMAND: $cmd\n" |
| fi |
| |
| out=$(eval ip netns exec host1 $cmd 2>&1) |
| rc=$? |
| if [ "$VERBOSE" = "1" ]; then |
| if [ -n "$out" ]; then |
| echo |
| echo " $out" |
| fi |
| echo |
| fi |
| |
| return $rc |
| } |
| |
| ################################################################################ |
| # create namespaces for hosts and sws |
| |
| create_vrf() |
| { |
| local ns=$1 |
| local vrf=$2 |
| local table=$3 |
| |
| if [ -n "${ns}" ]; then |
| ns="-netns ${ns}" |
| fi |
| |
| ip ${ns} link add ${vrf} type vrf table ${table} |
| ip ${ns} link set ${vrf} up |
| ip ${ns} route add vrf ${vrf} unreachable default metric 8192 |
| ip ${ns} -6 route add vrf ${vrf} unreachable default metric 8192 |
| |
| ip ${ns} addr add 127.0.0.1/8 dev ${vrf} |
| ip ${ns} -6 addr add ::1 dev ${vrf} nodad |
| |
| ip ${ns} ru del pref 0 |
| ip ${ns} ru add pref 32765 from all lookup local |
| ip ${ns} -6 ru del pref 0 |
| ip ${ns} -6 ru add pref 32765 from all lookup local |
| } |
| |
| create_ns() |
| { |
| local ns=$1 |
| local addr=$2 |
| local addr6=$3 |
| |
| [ -z "${addr}" ] && addr="-" |
| [ -z "${addr6}" ] && addr6="-" |
| |
| ip netns add ${ns} |
| |
| ip -netns ${ns} link set lo up |
| if [ "${addr}" != "-" ]; then |
| ip -netns ${ns} addr add dev lo ${addr} |
| fi |
| if [ "${addr6}" != "-" ]; then |
| ip -netns ${ns} -6 addr add dev lo ${addr6} |
| fi |
| |
| ip -netns ${ns} ro add unreachable default metric 8192 |
| ip -netns ${ns} -6 ro add unreachable default metric 8192 |
| |
| ip netns exec ${ns} sysctl -qw net.ipv4.ip_forward=1 |
| ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 |
| ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1 |
| ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1 |
| ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0 |
| } |
| |
| # create veth pair to connect namespaces and apply addresses. |
| connect_ns() |
| { |
| local ns1=$1 |
| local ns1_dev=$2 |
| local ns1_addr=$3 |
| local ns1_addr6=$4 |
| local ns2=$5 |
| local ns2_dev=$6 |
| local ns2_addr=$7 |
| local ns2_addr6=$8 |
| local ns1arg |
| local ns2arg |
| |
| if [ -n "${ns1}" ]; then |
| ns1arg="-netns ${ns1}" |
| fi |
| if [ -n "${ns2}" ]; then |
| ns2arg="-netns ${ns2}" |
| fi |
| |
| ip ${ns1arg} li add ${ns1_dev} type veth peer name tmp |
| ip ${ns1arg} li set ${ns1_dev} up |
| ip ${ns1arg} li set tmp netns ${ns2} name ${ns2_dev} |
| ip ${ns2arg} li set ${ns2_dev} up |
| |
| if [ "${ns1_addr}" != "-" ]; then |
| ip ${ns1arg} addr add dev ${ns1_dev} ${ns1_addr} |
| ip ${ns2arg} addr add dev ${ns2_dev} ${ns2_addr} |
| fi |
| |
| if [ "${ns1_addr6}" != "-" ]; then |
| ip ${ns1arg} addr add dev ${ns1_dev} ${ns1_addr6} nodad |
| ip ${ns2arg} addr add dev ${ns2_dev} ${ns2_addr6} nodad |
| fi |
| } |
| |
| ################################################################################ |
| |
| cleanup() |
| { |
| ip netns del host1 |
| ip netns del host2 |
| } |
| |
| setup() |
| { |
| create_ns "host1" |
| create_ns "host2" |
| |
| connect_ns "host1" eth0 ${HOST1_4}/24 ${HOST1_6}/64 \ |
| "host2" eth0 ${HOST2_4}/24 ${HOST2_6}/64 |
| |
| create_vrf "host1" ${VRF} ${TABLE} |
| ip -netns host1 link set dev eth0 master ${VRF} |
| } |
| |
| cleanup_xfrm() |
| { |
| for ns in host1 host2 |
| do |
| for x in state policy |
| do |
| ip -netns ${ns} xfrm ${x} flush |
| ip -6 -netns ${ns} xfrm ${x} flush |
| done |
| done |
| } |
| |
| setup_xfrm() |
| { |
| local h1_4=$1 |
| local h2_4=$2 |
| local h1_6=$3 |
| local h2_6=$4 |
| local devarg="$5" |
| |
| # |
| # policy |
| # |
| |
| # host1 - IPv4 out |
| ip -netns host1 xfrm policy add \ |
| src ${h1_4} dst ${h2_4} ${devarg} dir out \ |
| tmpl src ${HOST1_4} dst ${HOST2_4} proto esp mode tunnel |
| |
| # host2 - IPv4 in |
| ip -netns host2 xfrm policy add \ |
| src ${h1_4} dst ${h2_4} dir in \ |
| tmpl src ${HOST1_4} dst ${HOST2_4} proto esp mode tunnel |
| |
| # host1 - IPv4 in |
| ip -netns host1 xfrm policy add \ |
| src ${h2_4} dst ${h1_4} ${devarg} dir in \ |
| tmpl src ${HOST2_4} dst ${HOST1_4} proto esp mode tunnel |
| |
| # host2 - IPv4 out |
| ip -netns host2 xfrm policy add \ |
| src ${h2_4} dst ${h1_4} dir out \ |
| tmpl src ${HOST2_4} dst ${HOST1_4} proto esp mode tunnel |
| |
| |
| # host1 - IPv6 out |
| ip -6 -netns host1 xfrm policy add \ |
| src ${h1_6} dst ${h2_6} ${devarg} dir out \ |
| tmpl src ${HOST1_6} dst ${HOST2_6} proto esp mode tunnel |
| |
| # host2 - IPv6 in |
| ip -6 -netns host2 xfrm policy add \ |
| src ${h1_6} dst ${h2_6} dir in \ |
| tmpl src ${HOST1_6} dst ${HOST2_6} proto esp mode tunnel |
| |
| # host1 - IPv6 in |
| ip -6 -netns host1 xfrm policy add \ |
| src ${h2_6} dst ${h1_6} ${devarg} dir in \ |
| tmpl src ${HOST2_6} dst ${HOST1_6} proto esp mode tunnel |
| |
| # host2 - IPv6 out |
| ip -6 -netns host2 xfrm policy add \ |
| src ${h2_6} dst ${h1_6} dir out \ |
| tmpl src ${HOST2_6} dst ${HOST1_6} proto esp mode tunnel |
| |
| # |
| # state |
| # |
| ip -netns host1 xfrm state add src ${HOST1_4} dst ${HOST2_4} \ |
| proto esp spi ${SPI_1} reqid 0 mode tunnel \ |
| replay-window 4 replay-oseq 0x4 \ |
| auth-trunc 'hmac(md5)' ${AUTH_1} 96 \ |
| enc 'cbc(des3_ede)' ${ENC_1} \ |
| sel src ${h1_4} dst ${h2_4} ${devarg} |
| |
| ip -netns host2 xfrm state add src ${HOST1_4} dst ${HOST2_4} \ |
| proto esp spi ${SPI_1} reqid 0 mode tunnel \ |
| replay-window 4 replay-oseq 0x4 \ |
| auth-trunc 'hmac(md5)' ${AUTH_1} 96 \ |
| enc 'cbc(des3_ede)' ${ENC_1} \ |
| sel src ${h1_4} dst ${h2_4} |
| |
| |
| ip -netns host1 xfrm state add src ${HOST2_4} dst ${HOST1_4} \ |
| proto esp spi ${SPI_2} reqid 0 mode tunnel \ |
| replay-window 4 replay-oseq 0x4 \ |
| auth-trunc 'hmac(md5)' ${AUTH_2} 96 \ |
| enc 'cbc(des3_ede)' ${ENC_2} \ |
| sel src ${h2_4} dst ${h1_4} ${devarg} |
| |
| ip -netns host2 xfrm state add src ${HOST2_4} dst ${HOST1_4} \ |
| proto esp spi ${SPI_2} reqid 0 mode tunnel \ |
| replay-window 4 replay-oseq 0x4 \ |
| auth-trunc 'hmac(md5)' ${AUTH_2} 96 \ |
| enc 'cbc(des3_ede)' ${ENC_2} \ |
| sel src ${h2_4} dst ${h1_4} |
| |
| |
| ip -6 -netns host1 xfrm state add src ${HOST1_6} dst ${HOST2_6} \ |
| proto esp spi ${SPI_1} reqid 0 mode tunnel \ |
| replay-window 4 replay-oseq 0x4 \ |
| auth-trunc 'hmac(md5)' ${AUTH_1} 96 \ |
| enc 'cbc(des3_ede)' ${ENC_1} \ |
| sel src ${h1_6} dst ${h2_6} ${devarg} |
| |
| ip -6 -netns host2 xfrm state add src ${HOST1_6} dst ${HOST2_6} \ |
| proto esp spi ${SPI_1} reqid 0 mode tunnel \ |
| replay-window 4 replay-oseq 0x4 \ |
| auth-trunc 'hmac(md5)' ${AUTH_1} 96 \ |
| enc 'cbc(des3_ede)' ${ENC_1} \ |
| sel src ${h1_6} dst ${h2_6} |
| |
| |
| ip -6 -netns host1 xfrm state add src ${HOST2_6} dst ${HOST1_6} \ |
| proto esp spi ${SPI_2} reqid 0 mode tunnel \ |
| replay-window 4 replay-oseq 0x4 \ |
| auth-trunc 'hmac(md5)' ${AUTH_2} 96 \ |
| enc 'cbc(des3_ede)' ${ENC_2} \ |
| sel src ${h2_6} dst ${h1_6} ${devarg} |
| |
| ip -6 -netns host2 xfrm state add src ${HOST2_6} dst ${HOST1_6} \ |
| proto esp spi ${SPI_2} reqid 0 mode tunnel \ |
| replay-window 4 replay-oseq 0x4 \ |
| auth-trunc 'hmac(md5)' ${AUTH_2} 96 \ |
| enc 'cbc(des3_ede)' ${ENC_2} \ |
| sel src ${h2_6} dst ${h1_6} |
| } |
| |
| cleanup_xfrm_dev() |
| { |
| ip -netns host1 li del xfrm0 |
| ip -netns host2 addr del ${XFRM2_4}/24 dev eth0 |
| ip -netns host2 addr del ${XFRM2_6}/64 dev eth0 |
| } |
| |
| setup_xfrm_dev() |
| { |
| local vrfarg="vrf ${VRF}" |
| |
| ip -netns host1 li add type xfrm dev eth0 if_id ${IF_ID} |
| ip -netns host1 li set xfrm0 ${vrfarg} up |
| ip -netns host1 addr add ${XFRM1_4}/24 dev xfrm0 |
| ip -netns host1 addr add ${XFRM1_6}/64 dev xfrm0 |
| |
| ip -netns host2 addr add ${XFRM2_4}/24 dev eth0 |
| ip -netns host2 addr add ${XFRM2_6}/64 dev eth0 |
| |
| setup_xfrm ${XFRM1_4} ${XFRM2_4} ${XFRM1_6} ${XFRM2_6} "if_id ${IF_ID}" |
| } |
| |
| run_tests() |
| { |
| cleanup_xfrm |
| |
| # no IPsec |
| run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4} |
| log_test $? 0 "IPv4 no xfrm policy" |
| run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6} |
| log_test $? 0 "IPv6 no xfrm policy" |
| |
| # xfrm without VRF in sel |
| setup_xfrm ${HOST1_4} ${HOST2_4} ${HOST1_6} ${HOST2_6} |
| run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4} |
| log_test $? 0 "IPv4 xfrm policy based on address" |
| run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6} |
| log_test $? 0 "IPv6 xfrm policy based on address" |
| cleanup_xfrm |
| |
| # xfrm with VRF in sel |
| # Known failure: ipv4 resets the flow oif after the lookup. Fix is |
| # not straightforward. |
| # setup_xfrm ${HOST1_4} ${HOST2_4} ${HOST1_6} ${HOST2_6} "dev ${VRF}" |
| # run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4} |
| # log_test $? 0 "IPv4 xfrm policy with VRF in selector" |
| run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6} |
| log_test $? 0 "IPv6 xfrm policy with VRF in selector" |
| cleanup_xfrm |
| |
| # xfrm with enslaved device in sel |
| # Known failures: combined with the above, __xfrm{4,6}_selector_match |
| # needs to consider both l3mdev and enslaved device index. |
| # setup_xfrm ${HOST1_4} ${HOST2_4} ${HOST1_6} ${HOST2_6} "dev eth0" |
| # run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${HOST2_4} |
| # log_test $? 0 "IPv4 xfrm policy with enslaved device in selector" |
| # run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${HOST2_6} |
| # log_test $? 0 "IPv6 xfrm policy with enslaved device in selector" |
| # cleanup_xfrm |
| |
| # xfrm device |
| setup_xfrm_dev |
| run_cmd_host1 ip vrf exec ${VRF} ping -c1 -w1 ${XFRM2_4} |
| log_test $? 0 "IPv4 xfrm policy with xfrm device" |
| run_cmd_host1 ip vrf exec ${VRF} ${ping6} -c1 -w1 ${XFRM2_6} |
| log_test $? 0 "IPv6 xfrm policy with xfrm device" |
| cleanup_xfrm_dev |
| } |
| |
| ################################################################################ |
| # usage |
| |
| usage() |
| { |
| cat <<EOF |
| usage: ${0##*/} OPTS |
| |
| -p Pause on fail |
| -v verbose mode (show commands and output) |
| |
| done |
| EOF |
| } |
| |
| ################################################################################ |
| # main |
| |
| while getopts :pv o |
| do |
| case $o in |
| p) PAUSE_ON_FAIL=yes;; |
| v) VERBOSE=$(($VERBOSE + 1));; |
| h) usage; exit 0;; |
| *) usage; exit 1;; |
| esac |
| done |
| |
| cleanup 2>/dev/null |
| setup |
| |
| echo |
| echo "No qdisc on VRF device" |
| run_tests |
| |
| run_cmd_host1 tc qdisc add dev ${VRF} root netem delay 100ms |
| echo |
| echo "netem qdisc on VRF device" |
| run_tests |
| |
| printf "\nTests passed: %3d\n" ${nsuccess} |
| printf "Tests failed: %3d\n" ${nfail} |
| |
| exit $ret |
