blob: 8cdb86e8911ff98ec92c39ae3db8be106c76f836 [file] [log] [blame]
/*
* arch/s390/kernel/relocate_kernel64.S
*
* (C) Copyright IBM Corp. 2005
*
* Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
* Heiko Carstens <heiko.carstens@de.ibm.com>
*
*/
/*
* moves the new kernel to its destination...
* %r2 = pointer to first kimage_entry_t
* %r3 = start address - where to jump to after the job is done...
*
* %r5 will be used as temp. storage
* %r6 holds the destination address
* %r7 = PAGE_SIZE
* %r8 holds the source address
* %r9 = PAGE_SIZE
*
* 0xf000 is a page_mask
*/
.text
.globl relocate_kernel
relocate_kernel:
basr %r13,0 #base address
.base:
stnsm sys_msk-.base(%r13),0xf8 #disable DAT and IRQs
spx zero64-.base(%r13) #absolute addressing mode
stctg %c0,%c15,ctlregs-.base(%r13)
stmg %r0,%r15,gprregs-.base(%r13)
lghi %r0,3
sllg %r0,%r0,31
stg %r0,0x1d0(%r0)
la %r0,.back_pgm-.base(%r13)
stg %r0,0x1d8(%r0)
la %r1,load_psw-.base(%r13)
mvc 0(8,%r0),0(%r1)
la %r0,.back-.base(%r13)
st %r0,4(%r0)
oi 4(%r0),0x80
lghi %r0,0
diag %r0,%r0,0x308
.back:
lhi %r1,1 #mode 1 = esame
sigp %r1,%r0,0x12 #switch to esame mode
sam64 #switch to 64 bit addressing mode
basr %r13,0
.back_base:
oi have_diag308-.back_base(%r13),0x01
lctlg %c0,%c15,ctlregs-.back_base(%r13)
lmg %r0,%r15,gprregs-.back_base(%r13)
j .top
.back_pgm:
lmg %r0,%r15,gprregs-.base(%r13)
.top:
lghi %r7,4096 #load PAGE_SIZE in r7
lghi %r9,4096 #load PAGE_SIZE in r9
lg %r5,0(%r2) #read another word for indirection page
aghi %r2,8 #increment pointer
tml %r5,0x1 #is it a destination page?
je .indir_check #NO, goto "indir_check"
lgr %r6,%r5 #r6 = r5
nill %r6,0xf000 #mask it out and...
j .top #...next iteration
.indir_check:
tml %r5,0x2 #is it a indirection page?
je .done_test #NO, goto "done_test"
nill %r5,0xf000 #YES, mask out,
lgr %r2,%r5 #move it into the right register,
j .top #and read next...
.done_test:
tml %r5,0x4 #is it the done indicator?
je .source_test #NO! Well, then it should be the source indicator...
j .done #ok, lets finish it here...
.source_test:
tml %r5,0x8 #it should be a source indicator...
je .top #NO, ignore it...
lgr %r8,%r5 #r8 = r5
nill %r8,0xf000 #masking
0: mvcle %r6,%r8,0x0 #copy PAGE_SIZE bytes from r8 to r6 - pad with 0
jo 0b
j .top
.done:
sgr %r0,%r0 #clear register r0
la %r4,load_psw-.base(%r13) #load psw-address into the register
o %r3,4(%r4) #or load address into psw
st %r3,4(%r4)
mvc 0(8,%r0),0(%r4) #copy psw to absolute address 0
tm have_diag308-.base(%r13),0x01
jno .no_diag308
diag %r0,%r0,0x308
.no_diag308:
sam31 #31 bit mode
sr %r1,%r1 #erase register r1
sr %r2,%r2 #erase register r2
sigp %r1,%r2,0x12 #set cpuid to zero
lpsw 0 #hopefully start new kernel...
.align 8
zero64:
.quad 0
load_psw:
.long 0x00080000,0x80000000
sys_msk:
.quad 0
ctlregs:
.rept 16
.quad 0
.endr
gprregs:
.rept 16
.quad 0
.endr
have_diag308:
.byte 0
.align 8
relocate_kernel_end:
.globl relocate_kernel_len
relocate_kernel_len:
.quad relocate_kernel_end - relocate_kernel