include/asm-sparc/viking.h - linux/kernel/git/klassert/ipsec-next - Git at Google

 /* $Id: viking.h,v 1.19 1997/04/20 14:11:48 ecd Exp $
  * viking.h:  Defines specific to the GNU/Viking MBUS module.
  *            This is SRMMU stuff.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
  */
 #ifndef _SPARC_VIKING_H
 #define _SPARC_VIKING_H

 #include <asm/asi.h>
 #include <asm/mxcc.h>
 #include <asm/pgtsrmmu.h>

 /* Bits in the SRMMU control register for GNU/Viking modules.
  *
  * -----------------------------------------------------------
  * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME|
  * -----------------------------------------------------------
  *  31     24 23-17 16 15 14 13 12 11  10  9  8  7  6-2  1  0
  *
  * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache
  *                            1 = Twalks are cacheable in E-cache
  *
  * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present
  * and never caches them internally (or so states the docs).  Therefore
  * for machines lacking an E-cache (ie. in MBUS mode) this bit must
  * remain cleared.
  *
  * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable
  *                            1 = Passthru physical accesses cacheable
  *
  * This indicates whether accesses are cacheable when no cachable bit
  * is present in the pte when the processor is in boot-mode or the
  * access does not need pte's for translation (ie. pass-thru ASI's).
  * "Cachable" is only referring to E-cache (if present) and not the
  * on chip split I/D caches of the GNU/Viking.
  *
  * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on
  *
  * This enables snooping on the GNU/Viking bus.  This must be on
  * for the hardware cache consistency mechanisms of the GNU/Viking
  * to work at all.  On non-mxcc GNU/Viking modules the split I/D
  * caches will snoop regardless of whether they are enabled, this
  * takes care of the case where the I or D or both caches are turned
  * off yet still contain valid data.  Note also that this bit does
  * not affect GNU/Viking store-buffer snoops, those happen if the
  * store-buffer is enabled no matter what.
  *
  * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
  *
  * This indicates whether the GNU/Viking is in boot-mode or not,
  * if it is then all instruction fetch physical addresses are
  * computed as 0xff0000000 + low 28 bits of requested address.
  * GNU/Viking boot-mode does not affect data accesses.  Also,
  * in boot mode instruction accesses bypass the split on chip I/D
  * caches, they may be cached by the GNU/MXCC if present and enabled.
  *
  * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode
  *
  * This indicated the GNU/Viking configuration present.  If in
  * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache.  If it is
  * not then the GNU/Viking is on a module VBUS connected directly
  * to a GNU/MXCC cache controller.  The GNU/MXCC can be thus connected
  * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d).
  *
  * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on
  *
  * The GNU/Viking store buffer allows the chip to continue execution
  * after a store even if the data cannot be placed in one of the
  * caches during that cycle.  If disabled, all stores operations
  * occur synchronously.
  *
  * IC: Instruction Cache -- 0 = off, 1 = on
  * DC: Data Cache -- 0 = off, 1 = 0n
  *
  * These bits enable the on-cpu GNU/Viking split I/D caches.  Note,
  * as mentioned above, these caches will snoop the bus in GNU/MBUS
  * configurations even when disabled to avoid data corruption.
  *
  * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
  * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
  *
  */

 #define VIKING_MMUENABLE    0x00000001
 #define VIKING_NOFAULT      0x00000002
 #define VIKING_PSO          0x00000080
 #define VIKING_DCENABLE     0x00000100   /* Enable data cache */
 #define VIKING_ICENABLE     0x00000200   /* Enable instruction cache */
 #define VIKING_SBENABLE     0x00000400   /* Enable store buffer */
 #define VIKING_MMODE        0x00000800   /* MBUS mode */
 #define VIKING_PCENABLE     0x00001000   /* Enable parity checking */
 #define VIKING_BMODE        0x00002000
 #define VIKING_SPENABLE     0x00004000   /* Enable bus cache snooping */
 #define VIKING_ACENABLE     0x00008000   /* Enable alternate caching */
 #define VIKING_TCENABLE     0x00010000   /* Enable table-walks to be cached */
 #define VIKING_DPENABLE     0x00040000   /* Enable the data prefetcher */

 /*
  * GNU/Viking Breakpoint Action Register fields.
  */
 #define VIKING_ACTION_MIX   0x00001000   /* Enable multiple instructions */

 /*
  * GNU/Viking Cache Tags.
  */
 #define VIKING_PTAG_VALID   0x01000000   /* Cache block is valid */
 #define VIKING_PTAG_DIRTY   0x00010000   /* Block has been modified */
 #define VIKING_PTAG_SHARED  0x00000100   /* Shared with some other cache */

 #ifndef __ASSEMBLY__

 static inline void viking_flush_icache(void)
 {
 	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
 			     : /* no outputs */
 			     : "i" (ASI_M_IC_FLCLEAR)
 			     : "memory");
 }

 static inline void viking_flush_dcache(void)
 {
 	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
 			     : /* no outputs */
 			     : "i" (ASI_M_DC_FLCLEAR)
 			     : "memory");
 }

 static inline void viking_unlock_icache(void)
 {
 	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
 			     : /* no outputs */
 			     : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR)
 			     : "memory");
 }

 static inline void viking_unlock_dcache(void)
 {
 	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
 			     : /* no outputs */
 			     : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR)
 			     : "memory");
 }

 static inline void viking_set_bpreg(unsigned long regval)
 {
 	__asm__ __volatile__("sta %0, [%%g0] %1\n\t"
 			     : /* no outputs */
 			     : "r" (regval), "i" (ASI_M_ACTION)
 			     : "memory");
 }

 static inline unsigned long viking_get_bpreg(void)
 {
 	unsigned long regval;

 	__asm__ __volatile__("lda [%%g0] %1, %0\n\t"
 			     : "=r" (regval)
 			     : "i" (ASI_M_ACTION));
 	return regval;
 }

 static inline void viking_get_dcache_ptag(int set, int block,
 					      unsigned long *data)
 {
 	unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) |
 			     0x80000000;
 	unsigned long info, page;

 	__asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t"
 			      "or %%g0, %%g2, %0\n\t"
 			      "or %%g0, %%g3, %1\n\t"
 			      : "=r" (info), "=r" (page)
 			      : "r" (ptag), "i" (ASI_M_DATAC_TAG)
 			      : "g2", "g3");
 	data[0] = info;
 	data[1] = page;
 }

 static inline void viking_mxcc_turn_off_parity(unsigned long *mregp,
 						   unsigned long *mxcc_cregp)
 {
 	unsigned long mreg = *mregp;
 	unsigned long mxcc_creg = *mxcc_cregp;

 	mreg &= ~(VIKING_PCENABLE);
 	mxcc_creg &= ~(MXCC_CTL_PARE);

 	__asm__ __volatile__ ("set 1f, %%g2\n\t"
 			      "andcc %%g2, 4, %%g0\n\t"
 			      "bne 2f\n\t"
 			      " nop\n"
 			      "1:\n\t"
 			      "sta %0, [%%g0] %3\n\t"
 			      "sta %1, [%2] %4\n\t"
 			      "b 1f\n\t"
 			      " nop\n\t"
 			      "nop\n"
 			      "2:\n\t"
 			      "sta %0, [%%g0] %3\n\t"
 			      "sta %1, [%2] %4\n"
 			      "1:\n\t"
 			      : /* no output */
 			      : "r" (mreg), "r" (mxcc_creg),
 			        "r" (MXCC_CREG), "i" (ASI_M_MMUREGS),
 			        "i" (ASI_M_MXCC)
 			      : "g2", "memory", "cc");
 	*mregp = mreg;
 	*mxcc_cregp = mxcc_creg;
 }

 static inline unsigned long viking_hwprobe(unsigned long vaddr)
 {
 	unsigned long val;

 	vaddr &= PAGE_MASK;
 	/* Probe all MMU entries. */
 	__asm__ __volatile__("lda [%1] %2, %0\n\t"
 			     : "=r" (val)
 			     : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
 	if (!val)
 		return 0;

 	/* Probe region. */
 	__asm__ __volatile__("lda [%1] %2, %0\n\t"
 			     : "=r" (val)
 			     : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE));
 	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
 		vaddr &= ~SRMMU_PGDIR_MASK;
 		vaddr >>= PAGE_SHIFT;
 		return val | (vaddr << 8);
 	}

 	/* Probe segment. */
 	__asm__ __volatile__("lda [%1] %2, %0\n\t"
 			     : "=r" (val)
 			     : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE));
 	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
 		vaddr &= ~SRMMU_REAL_PMD_MASK;
 		vaddr >>= PAGE_SHIFT;
 		return val | (vaddr << 8);
 	}

 	/* Probe page. */
 	__asm__ __volatile__("lda [%1] %2, %0\n\t"
 			     : "=r" (val)
 			     : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE));
 	return val;
 }

 #endif /* !__ASSEMBLY__ */

 #endif /* !(_SPARC_VIKING_H) */
	/* $Id: viking.h,v 1.19 1997/04/20 14:11:48 ecd Exp $
	* viking.h: Defines specific to the GNU/Viking MBUS module.
	* This is SRMMU stuff.
	*
	* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
	*/
	#ifndef _SPARC_VIKING_H
	#define _SPARC_VIKING_H

	#include <asm/asi.h>
	#include <asm/mxcc.h>
	#include <asm/pgtsrmmu.h>

	/* Bits in the SRMMU control register for GNU/Viking modules.
	*
	* -----------------------------------------------------------
	* \|impl-vers\| RSV \|TC\|AC\|SP\|BM\|PC\|MBM\|SB\|IC\|DC\|PSO\|RSV\|NF\|ME\|
	* -----------------------------------------------------------
	* 31 24 23-17 16 15 14 13 12 11 10 9 8 7 6-2 1 0
	*
	* TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache
	* 1 = Twalks are cacheable in E-cache
	*
	* GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present
	* and never caches them internally (or so states the docs). Therefore
	* for machines lacking an E-cache (ie. in MBUS mode) this bit must
	* remain cleared.
	*
	* AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable
	* 1 = Passthru physical accesses cacheable
	*
	* This indicates whether accesses are cacheable when no cachable bit
	* is present in the pte when the processor is in boot-mode or the
	* access does not need pte's for translation (ie. pass-thru ASI's).
	* "Cachable" is only referring to E-cache (if present) and not the
	* on chip split I/D caches of the GNU/Viking.
	*
	* SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on
	*
	* This enables snooping on the GNU/Viking bus. This must be on
	* for the hardware cache consistency mechanisms of the GNU/Viking
	* to work at all. On non-mxcc GNU/Viking modules the split I/D
	* caches will snoop regardless of whether they are enabled, this
	* takes care of the case where the I or D or both caches are turned
	* off yet still contain valid data. Note also that this bit does
	* not affect GNU/Viking store-buffer snoops, those happen if the
	* store-buffer is enabled no matter what.
	*
	* BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
	*
	* This indicates whether the GNU/Viking is in boot-mode or not,
	* if it is then all instruction fetch physical addresses are
	* computed as 0xff0000000 + low 28 bits of requested address.
	* GNU/Viking boot-mode does not affect data accesses. Also,
	* in boot mode instruction accesses bypass the split on chip I/D
	* caches, they may be cached by the GNU/MXCC if present and enabled.
	*
	* MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode
	*
	* This indicated the GNU/Viking configuration present. If in
	* MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache. If it is
	* not then the GNU/Viking is on a module VBUS connected directly
	* to a GNU/MXCC cache controller. The GNU/MXCC can be thus connected
	* to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d).
	*
	* SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on
	*
	* The GNU/Viking store buffer allows the chip to continue execution
	* after a store even if the data cannot be placed in one of the
	* caches during that cycle. If disabled, all stores operations
	* occur synchronously.
	*
	* IC: Instruction Cache -- 0 = off, 1 = on
	* DC: Data Cache -- 0 = off, 1 = 0n
	*
	* These bits enable the on-cpu GNU/Viking split I/D caches. Note,
	* as mentioned above, these caches will snoop the bus in GNU/MBUS
	* configurations even when disabled to avoid data corruption.
	*
	* NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
	* ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
	*
	*/

	#define VIKING_MMUENABLE 0x00000001
	#define VIKING_NOFAULT 0x00000002
	#define VIKING_PSO 0x00000080
	#define VIKING_DCENABLE 0x00000100 /* Enable data cache */
	#define VIKING_ICENABLE 0x00000200 /* Enable instruction cache */
	#define VIKING_SBENABLE 0x00000400 /* Enable store buffer */
	#define VIKING_MMODE 0x00000800 /* MBUS mode */
	#define VIKING_PCENABLE 0x00001000 /* Enable parity checking */
	#define VIKING_BMODE 0x00002000
	#define VIKING_SPENABLE 0x00004000 /* Enable bus cache snooping */
	#define VIKING_ACENABLE 0x00008000 /* Enable alternate caching */
	#define VIKING_TCENABLE 0x00010000 /* Enable table-walks to be cached */
	#define VIKING_DPENABLE 0x00040000 /* Enable the data prefetcher */

	/*
	* GNU/Viking Breakpoint Action Register fields.
	*/
	#define VIKING_ACTION_MIX 0x00001000 /* Enable multiple instructions */

	/*
	* GNU/Viking Cache Tags.
	*/
	#define VIKING_PTAG_VALID 0x01000000 /* Cache block is valid */
	#define VIKING_PTAG_DIRTY 0x00010000 /* Block has been modified */
	#define VIKING_PTAG_SHARED 0x00000100 /* Shared with some other cache */

	#ifndef __ASSEMBLY__

	static inline void viking_flush_icache(void)
	{
	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
	: /* no outputs */
	: "i" (ASI_M_IC_FLCLEAR)
	: "memory");
	}

	static inline void viking_flush_dcache(void)
	{
	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
	: /* no outputs */
	: "i" (ASI_M_DC_FLCLEAR)
	: "memory");
	}

	static inline void viking_unlock_icache(void)
	{
	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
	: /* no outputs */
	: "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR)
	: "memory");
	}

	static inline void viking_unlock_dcache(void)
	{
	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
	: /* no outputs */
	: "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR)
	: "memory");
	}

	static inline void viking_set_bpreg(unsigned long regval)
	{
	__asm__ __volatile__("sta %0, [%%g0] %1\n\t"
	: /* no outputs */
	: "r" (regval), "i" (ASI_M_ACTION)
	: "memory");
	}

	static inline unsigned long viking_get_bpreg(void)
	{
	unsigned long regval;

	__asm__ __volatile__("lda [%%g0] %1, %0\n\t"
	: "=r" (regval)
	: "i" (ASI_M_ACTION));
	return regval;
	}

	static inline void viking_get_dcache_ptag(int set, int block,
	unsigned long *data)
	{
	unsigned long ptag = ((set & 0x7f) << 5) \| ((block & 0x3) << 26) \|
	0x80000000;
	unsigned long info, page;

	__asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t"
	"or %%g0, %%g2, %0\n\t"
	"or %%g0, %%g3, %1\n\t"
	: "=r" (info), "=r" (page)
	: "r" (ptag), "i" (ASI_M_DATAC_TAG)
	: "g2", "g3");
	data[0] = info;
	data[1] = page;
	}

	static inline void viking_mxcc_turn_off_parity(unsigned long *mregp,
	unsigned long *mxcc_cregp)
	{
	unsigned long mreg = *mregp;
	unsigned long mxcc_creg = *mxcc_cregp;

	mreg &= ~(VIKING_PCENABLE);
	mxcc_creg &= ~(MXCC_CTL_PARE);

	__asm__ __volatile__ ("set 1f, %%g2\n\t"
	"andcc %%g2, 4, %%g0\n\t"
	"bne 2f\n\t"
	" nop\n"
	"1:\n\t"
	"sta %0, [%%g0] %3\n\t"
	"sta %1, [%2] %4\n\t"
	"b 1f\n\t"
	" nop\n\t"
	"nop\n"
	"2:\n\t"
	"sta %0, [%%g0] %3\n\t"
	"sta %1, [%2] %4\n"
	"1:\n\t"
	: /* no output */
	: "r" (mreg), "r" (mxcc_creg),
	"r" (MXCC_CREG), "i" (ASI_M_MMUREGS),
	"i" (ASI_M_MXCC)
	: "g2", "memory", "cc");
	*mregp = mreg;
	*mxcc_cregp = mxcc_creg;
	}

	static inline unsigned long viking_hwprobe(unsigned long vaddr)
	{
	unsigned long val;

	vaddr &= PAGE_MASK;
	/* Probe all MMU entries. */
	__asm__ __volatile__("lda [%1] %2, %0\n\t"
	: "=r" (val)
	: "r" (vaddr \| 0x400), "i" (ASI_M_FLUSH_PROBE));
	if (!val)
	return 0;

	/* Probe region. */
	__asm__ __volatile__("lda [%1] %2, %0\n\t"
	: "=r" (val)
	: "r" (vaddr \| 0x200), "i" (ASI_M_FLUSH_PROBE));
	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
	vaddr &= ~SRMMU_PGDIR_MASK;
	vaddr >>= PAGE_SHIFT;
	return val \| (vaddr << 8);
	}

	/* Probe segment. */
	__asm__ __volatile__("lda [%1] %2, %0\n\t"
	: "=r" (val)
	: "r" (vaddr \| 0x100), "i" (ASI_M_FLUSH_PROBE));
	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
	vaddr &= ~SRMMU_REAL_PMD_MASK;
	vaddr >>= PAGE_SHIFT;
	return val \| (vaddr << 8);
	}

	/* Probe page. */
	__asm__ __volatile__("lda [%1] %2, %0\n\t"
	: "=r" (val)
	: "r" (vaddr), "i" (ASI_M_FLUSH_PROBE));
	return val;
	}

	#endif /* !__ASSEMBLY__ */

	#endif /* !(_SPARC_VIKING_H) */