net: enetc: Make use of the helper function dev_err_probe()
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, and simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index 3ca93ad..0c69409 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -2610,10 +2610,8 @@
pcie_flr(pdev);
err = pci_enable_device_mem(pdev);
- if (err) {
- dev_err(&pdev->dev, "device enable failed\n");
- return err;
- }
+ if (err)
+ return dev_err_probe(&pdev->dev, err, "device enable failed\n");
/* set up for high or low dma */
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index 60d94e0..f0ff950 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -804,10 +804,8 @@
snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
err = of_mdiobus_register(bus, np);
- if (err) {
- dev_err(dev, "cannot register MDIO bus\n");
- return err;
- }
+ if (err)
+ return dev_err_probe(dev, err, "cannot register MDIO bus\n");
pf->mdio = bus;
@@ -1216,10 +1214,8 @@
ERR_PTR(err));
err = enetc_pci_probe(pdev, KBUILD_MODNAME, sizeof(*pf));
- if (err) {
- dev_err(&pdev->dev, "PCI probing failed\n");
- return err;
- }
+ if (err)
+ return dev_err_probe(&pdev->dev, err, "PCI probing failed\n");
si = pci_get_drvdata(pdev);
if (!si->hw.port || !si->hw.global) {
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ptp.c b/drivers/net/ethernet/freescale/enetc/enetc_ptp.c
index bc59489..36b4f51 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_ptp.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_ptp.c
@@ -39,10 +39,8 @@
}
err = pci_enable_device_mem(pdev);
- if (err) {
- dev_err(&pdev->dev, "device enable failed\n");
- return err;
- }
+ if (err)
+ return dev_err_probe(&pdev->dev, err, "device enable failed\n");
/* set up for high or low dma */
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_vf.c b/drivers/net/ethernet/freescale/enetc/enetc_vf.c
index 1a9d1e8..0704f6b 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_vf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_vf.c
@@ -143,10 +143,8 @@
int err;
err = enetc_pci_probe(pdev, KBUILD_MODNAME, 0);
- if (err) {
- dev_err(&pdev->dev, "PCI probing failed\n");
- return err;
- }
+ if (err)
+ return dev_err_probe(&pdev->dev, err, "PCI probing failed\n");
si = pci_get_drvdata(pdev);
