| /* |
| * Sound driver for Silicon Graphics 320 and 540 Visual Workstations' |
| * onboard audio. See notes in Documentation/sound/oss/vwsnd . |
| * |
| * Copyright 1999 Silicon Graphics, Inc. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #undef VWSND_DEBUG /* define for debugging */ |
| |
| /* |
| * XXX to do - |
| * |
| * External sync. |
| * Rename swbuf, hwbuf, u&i, hwptr&swptr to something rational. |
| * Bug - if select() called before read(), pcm_setup() not called. |
| * Bug - output doesn't stop soon enough if process killed. |
| */ |
| |
| /* |
| * Things to test - |
| * |
| * Will readv/writev work? Write a test. |
| * |
| * insmod/rmmod 100 million times. |
| * |
| * Run I/O until int ptrs wrap around (roughly 6.2 hours @ DAT |
| * rate). |
| * |
| * Concurrent threads banging on mixer simultaneously, both UP |
| * and SMP kernels. Especially, watch for thread A changing |
| * OUTSRC while thread B changes gain -- both write to the same |
| * ad1843 register. |
| * |
| * What happens if a client opens /dev/audio then forks? |
| * Do two procs have /dev/audio open? Test. |
| * |
| * Pump audio through the CD, MIC and line inputs and verify that |
| * they mix/mute into the output. |
| * |
| * Apps: |
| * amp |
| * mpg123 |
| * x11amp |
| * mxv |
| * kmedia |
| * esound |
| * need more input apps |
| * |
| * Run tests while bombarding with signals. setitimer(2) will do it... */ |
| |
| /* |
| * This driver is organized in nine sections. |
| * The nine sections are: |
| * |
| * debug stuff |
| * low level lithium access |
| * high level lithium access |
| * AD1843 access |
| * PCM I/O |
| * audio driver |
| * mixer driver |
| * probe/attach/unload |
| * initialization and loadable kernel module interface |
| * |
| * That is roughly the order of increasing abstraction, so forward |
| * dependencies are minimal. |
| */ |
| |
| /* |
| * Locking Notes |
| * |
| * INC_USE_COUNT and DEC_USE_COUNT keep track of the number of |
| * open descriptors to this driver. They store it in vwsnd_use_count. |
| * The global device list, vwsnd_dev_list, is immutable when the IN_USE |
| * is true. |
| * |
| * devc->open_lock is a semaphore that is used to enforce the |
| * single reader/single writer rule for /dev/audio. The rule is |
| * that each device may have at most one reader and one writer. |
| * Open will block until the previous client has closed the |
| * device, unless O_NONBLOCK is specified. |
| * |
| * The semaphore devc->io_mutex serializes PCM I/O syscalls. This |
| * is unnecessary in Linux 2.2, because the kernel lock |
| * serializes read, write, and ioctl globally, but it's there, |
| * ready for the brave, new post-kernel-lock world. |
| * |
| * Locking between interrupt and baselevel is handled by the |
| * "lock" spinlock in vwsnd_port (one lock each for read and |
| * write). Each half holds the lock just long enough to see what |
| * area it owns and update its pointers. See pcm_output() and |
| * pcm_input() for most of the gory stuff. |
| * |
| * devc->mix_mutex serializes all mixer ioctls. This is also |
| * redundant because of the kernel lock. |
| * |
| * The lowest level lock is lith->lithium_lock. It is a |
| * spinlock which is held during the two-register tango of |
| * reading/writing an AD1843 register. See |
| * li_{read,write}_ad1843_reg(). |
| */ |
| |
| /* |
| * Sample Format Notes |
| * |
| * Lithium's DMA engine has two formats: 16-bit 2's complement |
| * and 8-bit unsigned . 16-bit transfers the data unmodified, 2 |
| * bytes per sample. 8-bit unsigned transfers 1 byte per sample |
| * and XORs each byte with 0x80. Lithium can input or output |
| * either mono or stereo in either format. |
| * |
| * The AD1843 has four formats: 16-bit 2's complement, 8-bit |
| * unsigned, 8-bit mu-Law and 8-bit A-Law. |
| * |
| * This driver supports five formats: AFMT_S8, AFMT_U8, |
| * AFMT_MU_LAW, AFMT_A_LAW, and AFMT_S16_LE. |
| * |
| * For AFMT_U8 output, we keep the AD1843 in 16-bit mode, and |
| * rely on Lithium's XOR to translate between U8 and S8. |
| * |
| * For AFMT_S8, AFMT_MU_LAW and AFMT_A_LAW output, we have to XOR |
| * the 0x80 bit in software to compensate for Lithium's XOR. |
| * This happens in pcm_copy_{in,out}(). |
| * |
| * Changes: |
| * 11-10-2000 Bartlomiej Zolnierkiewicz <bkz@linux-ide.org> |
| * Added some __init/__exit |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| |
| #include <linux/spinlock.h> |
| #include <linux/wait.h> |
| #include <linux/interrupt.h> |
| #include <linux/mutex.h> |
| #include <linux/slab.h> |
| |
| #include <asm/visws/cobalt.h> |
| |
| #include "sound_config.h" |
| |
| /*****************************************************************************/ |
| /* debug stuff */ |
| |
| #ifdef VWSND_DEBUG |
| |
| static DEFINE_MUTEX(vwsnd_mutex); |
| static int shut_up = 1; |
| |
| /* |
| * dbgassert - called when an assertion fails. |
| */ |
| |
| static void dbgassert(const char *fcn, int line, const char *expr) |
| { |
| if (in_interrupt()) |
| panic("ASSERTION FAILED IN INTERRUPT, %s:%s:%d %s\n", |
| __FILE__, fcn, line, expr); |
| else { |
| int x; |
| printk(KERN_ERR "ASSERTION FAILED, %s:%s:%d %s\n", |
| __FILE__, fcn, line, expr); |
| x = * (volatile int *) 0; /* force proc to exit */ |
| } |
| } |
| |
| /* |
| * Bunch of useful debug macros: |
| * |
| * ASSERT - print unless e nonzero (panic if in interrupt) |
| * DBGDO - include arbitrary code if debugging |
| * DBGX - debug print raw (w/o function name) |
| * DBGP - debug print w/ function name |
| * DBGE - debug print function entry |
| * DBGC - debug print function call |
| * DBGR - debug print function return |
| * DBGXV - debug print raw when verbose |
| * DBGPV - debug print when verbose |
| * DBGEV - debug print function entry when verbose |
| * DBGRV - debug print function return when verbose |
| */ |
| |
| #define ASSERT(e) ((e) ? (void) 0 : dbgassert(__func__, __LINE__, #e)) |
| #define DBGDO(x) x |
| #define DBGX(fmt, args...) (in_interrupt() ? 0 : printk(KERN_ERR fmt, ##args)) |
| #define DBGP(fmt, args...) (DBGX("%s: " fmt, __func__ , ##args)) |
| #define DBGE(fmt, args...) (DBGX("%s" fmt, __func__ , ##args)) |
| #define DBGC(rtn) (DBGP("calling %s\n", rtn)) |
| #define DBGR() (DBGP("returning\n")) |
| #define DBGXV(fmt, args...) (shut_up ? 0 : DBGX(fmt, ##args)) |
| #define DBGPV(fmt, args...) (shut_up ? 0 : DBGP(fmt, ##args)) |
| #define DBGEV(fmt, args...) (shut_up ? 0 : DBGE(fmt, ##args)) |
| #define DBGCV(rtn) (shut_up ? 0 : DBGC(rtn)) |
| #define DBGRV() (shut_up ? 0 : DBGR()) |
| |
| #else /* !VWSND_DEBUG */ |
| |
| #define ASSERT(e) ((void) 0) |
| #define DBGDO(x) /* don't */ |
| #define DBGX(fmt, args...) ((void) 0) |
| #define DBGP(fmt, args...) ((void) 0) |
| #define DBGE(fmt, args...) ((void) 0) |
| #define DBGC(rtn) ((void) 0) |
| #define DBGR() ((void) 0) |
| #define DBGPV(fmt, args...) ((void) 0) |
| #define DBGXV(fmt, args...) ((void) 0) |
| #define DBGEV(fmt, args...) ((void) 0) |
| #define DBGCV(rtn) ((void) 0) |
| #define DBGRV() ((void) 0) |
| |
| #endif /* !VWSND_DEBUG */ |
| |
| /*****************************************************************************/ |
| /* low level lithium access */ |
| |
| /* |
| * We need to talk to Lithium registers on three pages. Here are |
| * the pages' offsets from the base address (0xFF001000). |
| */ |
| |
| enum { |
| LI_PAGE0_OFFSET = 0x01000 - 0x1000, /* FF001000 */ |
| LI_PAGE1_OFFSET = 0x0F000 - 0x1000, /* FF00F000 */ |
| LI_PAGE2_OFFSET = 0x10000 - 0x1000, /* FF010000 */ |
| }; |
| |
| /* low-level lithium data */ |
| |
| typedef struct lithium { |
| void * page0; /* virtual addresses */ |
| void * page1; |
| void * page2; |
| spinlock_t lock; /* protects codec and UST/MSC access */ |
| } lithium_t; |
| |
| /* |
| * li_destroy destroys the lithium_t structure and vm mappings. |
| */ |
| |
| static void li_destroy(lithium_t *lith) |
| { |
| if (lith->page0) { |
| iounmap(lith->page0); |
| lith->page0 = NULL; |
| } |
| if (lith->page1) { |
| iounmap(lith->page1); |
| lith->page1 = NULL; |
| } |
| if (lith->page2) { |
| iounmap(lith->page2); |
| lith->page2 = NULL; |
| } |
| } |
| |
| /* |
| * li_create initializes the lithium_t structure and sets up vm mappings |
| * to access the registers. |
| * Returns 0 on success, -errno on failure. |
| */ |
| |
| static int __init li_create(lithium_t *lith, unsigned long baseaddr) |
| { |
| spin_lock_init(&lith->lock); |
| lith->page0 = ioremap_nocache(baseaddr + LI_PAGE0_OFFSET, PAGE_SIZE); |
| lith->page1 = ioremap_nocache(baseaddr + LI_PAGE1_OFFSET, PAGE_SIZE); |
| lith->page2 = ioremap_nocache(baseaddr + LI_PAGE2_OFFSET, PAGE_SIZE); |
| if (!lith->page0 || !lith->page1 || !lith->page2) { |
| li_destroy(lith); |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| /* |
| * basic register accessors - read/write long/byte |
| */ |
| |
| static __inline__ unsigned long li_readl(lithium_t *lith, int off) |
| { |
| return * (volatile unsigned long *) (lith->page0 + off); |
| } |
| |
| static __inline__ unsigned char li_readb(lithium_t *lith, int off) |
| { |
| return * (volatile unsigned char *) (lith->page0 + off); |
| } |
| |
| static __inline__ void li_writel(lithium_t *lith, int off, unsigned long val) |
| { |
| * (volatile unsigned long *) (lith->page0 + off) = val; |
| } |
| |
| static __inline__ void li_writeb(lithium_t *lith, int off, unsigned char val) |
| { |
| * (volatile unsigned char *) (lith->page0 + off) = val; |
| } |
| |
| /*****************************************************************************/ |
| /* High Level Lithium Access */ |
| |
| /* |
| * Lithium DMA Notes |
| * |
| * Lithium has two dedicated DMA channels for audio. They are known |
| * as comm1 and comm2 (communication areas 1 and 2). Comm1 is for |
| * input, and comm2 is for output. Each is controlled by three |
| * registers: BASE (base address), CFG (config) and CCTL |
| * (config/control). |
| * |
| * Each DMA channel points to a physically contiguous ring buffer in |
| * main memory of up to 8 Kbytes. (This driver always uses 8 Kb.) |
| * There are three pointers into the ring buffer: read, write, and |
| * trigger. The pointers are 8 bits each. Each pointer points to |
| * 32-byte "chunks" of data. The DMA engine moves 32 bytes at a time, |
| * so there is no finer-granularity control. |
| * |
| * In comm1, the hardware updates the write ptr, and software updates |
| * the read ptr. In comm2, it's the opposite: hardware updates the |
| * read ptr, and software updates the write ptr. I designate the |
| * hardware-updated ptr as the hwptr, and the software-updated ptr as |
| * the swptr. |
| * |
| * The trigger ptr and trigger mask are used to trigger interrupts. |
| * From the Lithium spec, section 5.6.8, revision of 12/15/1998: |
| * |
| * Trigger Mask Value |
| * |
| * A three bit wide field that represents a power of two mask |
| * that is used whenever the trigger pointer is compared to its |
| * respective read or write pointer. A value of zero here |
| * implies a mask of 0xFF and a value of seven implies a mask |
| * 0x01. This value can be used to sub-divide the ring buffer |
| * into pie sections so that interrupts monitor the progress of |
| * hardware from section to section. |
| * |
| * My interpretation of that is, whenever the hw ptr is updated, it is |
| * compared with the trigger ptr, and the result is masked by the |
| * trigger mask. (Actually, by the complement of the trigger mask.) |
| * If the result is zero, an interrupt is triggered. I.e., interrupt |
| * if ((hwptr & ~mask) == (trptr & ~mask)). The mask is formed from |
| * the trigger register value as mask = (1 << (8 - tmreg)) - 1. |
| * |
| * In yet different words, setting tmreg to 0 causes an interrupt after |
| * every 256 DMA chunks (8192 bytes) or once per traversal of the |
| * ring buffer. Setting it to 7 caues an interrupt every 2 DMA chunks |
| * (64 bytes) or 128 times per traversal of the ring buffer. |
| */ |
| |
| /* Lithium register offsets and bit definitions */ |
| |
| #define LI_HOST_CONTROLLER 0x000 |
| # define LI_HC_RESET 0x00008000 |
| # define LI_HC_LINK_ENABLE 0x00004000 |
| # define LI_HC_LINK_FAILURE 0x00000004 |
| # define LI_HC_LINK_CODEC 0x00000002 |
| # define LI_HC_LINK_READY 0x00000001 |
| |
| #define LI_INTR_STATUS 0x010 |
| #define LI_INTR_MASK 0x014 |
| # define LI_INTR_LINK_ERR 0x00008000 |
| # define LI_INTR_COMM2_TRIG 0x00000008 |
| # define LI_INTR_COMM2_UNDERFLOW 0x00000004 |
| # define LI_INTR_COMM1_TRIG 0x00000002 |
| # define LI_INTR_COMM1_OVERFLOW 0x00000001 |
| |
| #define LI_CODEC_COMMAND 0x018 |
| # define LI_CC_BUSY 0x00008000 |
| # define LI_CC_DIR 0x00000080 |
| # define LI_CC_DIR_RD LI_CC_DIR |
| # define LI_CC_DIR_WR (!LI_CC_DIR) |
| # define LI_CC_ADDR_MASK 0x0000007F |
| |
| #define LI_CODEC_DATA 0x01C |
| |
| #define LI_COMM1_BASE 0x100 |
| #define LI_COMM1_CTL 0x104 |
| # define LI_CCTL_RESET 0x80000000 |
| # define LI_CCTL_SIZE 0x70000000 |
| # define LI_CCTL_DMA_ENABLE 0x08000000 |
| # define LI_CCTL_TMASK 0x07000000 /* trigger mask */ |
| # define LI_CCTL_TPTR 0x00FF0000 /* trigger pointer */ |
| # define LI_CCTL_RPTR 0x0000FF00 |
| # define LI_CCTL_WPTR 0x000000FF |
| #define LI_COMM1_CFG 0x108 |
| # define LI_CCFG_LOCK 0x00008000 |
| # define LI_CCFG_SLOT 0x00000070 |
| # define LI_CCFG_DIRECTION 0x00000008 |
| # define LI_CCFG_DIR_IN (!LI_CCFG_DIRECTION) |
| # define LI_CCFG_DIR_OUT LI_CCFG_DIRECTION |
| # define LI_CCFG_MODE 0x00000004 |
| # define LI_CCFG_MODE_MONO (!LI_CCFG_MODE) |
| # define LI_CCFG_MODE_STEREO LI_CCFG_MODE |
| # define LI_CCFG_FORMAT 0x00000003 |
| # define LI_CCFG_FMT_8BIT 0x00000000 |
| # define LI_CCFG_FMT_16BIT 0x00000001 |
| #define LI_COMM2_BASE 0x10C |
| #define LI_COMM2_CTL 0x110 |
| /* bit definitions are the same as LI_COMM1_CTL */ |
| #define LI_COMM2_CFG 0x114 |
| /* bit definitions are the same as LI_COMM1_CFG */ |
| |
| #define LI_UST_LOW 0x200 /* 64-bit Unadjusted System Time is */ |
| #define LI_UST_HIGH 0x204 /* microseconds since boot */ |
| |
| #define LI_AUDIO1_UST 0x300 /* UST-MSC pairs */ |
| #define LI_AUDIO1_MSC 0x304 /* MSC (Media Stream Counter) */ |
| #define LI_AUDIO2_UST 0x308 /* counts samples actually */ |
| #define LI_AUDIO2_MSC 0x30C /* processed as of time UST */ |
| |
| /* |
| * Lithium's DMA engine operates on chunks of 32 bytes. We call that |
| * a DMACHUNK. |
| */ |
| |
| #define DMACHUNK_SHIFT 5 |
| #define DMACHUNK_SIZE (1 << DMACHUNK_SHIFT) |
| #define BYTES_TO_CHUNKS(bytes) ((bytes) >> DMACHUNK_SHIFT) |
| #define CHUNKS_TO_BYTES(chunks) ((chunks) << DMACHUNK_SHIFT) |
| |
| /* |
| * Two convenient macros to shift bitfields into/out of position. |
| * |
| * Observe that (mask & -mask) is (1 << low_set_bit_of(mask)). |
| * As long as mask is constant, we trust the compiler will change the |
| * multiply and divide into shifts. |
| */ |
| |
| #define SHIFT_FIELD(val, mask) (((val) * ((mask) & -(mask))) & (mask)) |
| #define UNSHIFT_FIELD(val, mask) (((val) & (mask)) / ((mask) & -(mask))) |
| |
| /* |
| * dma_chan_desc is invariant information about a Lithium |
| * DMA channel. There are two instances, li_comm1 and li_comm2. |
| * |
| * Note that the CCTL register fields are write ptr and read ptr, but what |
| * we care about are which pointer is updated by software and which by |
| * hardware. |
| */ |
| |
| typedef struct dma_chan_desc { |
| int basereg; |
| int cfgreg; |
| int ctlreg; |
| int hwptrreg; |
| int swptrreg; |
| int ustreg; |
| int mscreg; |
| unsigned long swptrmask; |
| int ad1843_slot; |
| int direction; /* LI_CCTL_DIR_IN/OUT */ |
| } dma_chan_desc_t; |
| |
| static const dma_chan_desc_t li_comm1 = { |
| LI_COMM1_BASE, /* base register offset */ |
| LI_COMM1_CFG, /* config register offset */ |
| LI_COMM1_CTL, /* control register offset */ |
| LI_COMM1_CTL + 0, /* hw ptr reg offset (write ptr) */ |
| LI_COMM1_CTL + 1, /* sw ptr reg offset (read ptr) */ |
| LI_AUDIO1_UST, /* ust reg offset */ |
| LI_AUDIO1_MSC, /* msc reg offset */ |
| LI_CCTL_RPTR, /* sw ptr bitmask in ctlval */ |
| 2, /* ad1843 serial slot */ |
| LI_CCFG_DIR_IN /* direction */ |
| }; |
| |
| static const dma_chan_desc_t li_comm2 = { |
| LI_COMM2_BASE, /* base register offset */ |
| LI_COMM2_CFG, /* config register offset */ |
| LI_COMM2_CTL, /* control register offset */ |
| LI_COMM2_CTL + 1, /* hw ptr reg offset (read ptr) */ |
| LI_COMM2_CTL + 0, /* sw ptr reg offset (writr ptr) */ |
| LI_AUDIO2_UST, /* ust reg offset */ |
| LI_AUDIO2_MSC, /* msc reg offset */ |
| LI_CCTL_WPTR, /* sw ptr bitmask in ctlval */ |
| 2, /* ad1843 serial slot */ |
| LI_CCFG_DIR_OUT /* direction */ |
| }; |
| |
| /* |
| * dma_chan is variable information about a Lithium DMA channel. |
| * |
| * The desc field points to invariant information. |
| * The lith field points to a lithium_t which is passed |
| * to li_read* and li_write* to access the registers. |
| * The *val fields shadow the lithium registers' contents. |
| */ |
| |
| typedef struct dma_chan { |
| const dma_chan_desc_t *desc; |
| lithium_t *lith; |
| unsigned long baseval; |
| unsigned long cfgval; |
| unsigned long ctlval; |
| } dma_chan_t; |
| |
| /* |
| * ustmsc is a UST/MSC pair (Unadjusted System Time/Media Stream Counter). |
| * UST is time in microseconds since the system booted, and MSC is a |
| * counter that increments with every audio sample. |
| */ |
| |
| typedef struct ustmsc { |
| unsigned long long ust; |
| unsigned long msc; |
| } ustmsc_t; |
| |
| /* |
| * li_ad1843_wait waits until lithium says the AD1843 register |
| * exchange is not busy. Returns 0 on success, -EBUSY on timeout. |
| * |
| * Locking: must be called with lithium_lock held. |
| */ |
| |
| static int li_ad1843_wait(lithium_t *lith) |
| { |
| unsigned long later = jiffies + 2; |
| while (li_readl(lith, LI_CODEC_COMMAND) & LI_CC_BUSY) |
| if (time_after_eq(jiffies, later)) |
| return -EBUSY; |
| return 0; |
| } |
| |
| /* |
| * li_read_ad1843_reg returns the current contents of a 16 bit AD1843 register. |
| * |
| * Returns unsigned register value on success, -errno on failure. |
| */ |
| |
| static int li_read_ad1843_reg(lithium_t *lith, int reg) |
| { |
| int val; |
| |
| ASSERT(!in_interrupt()); |
| spin_lock(&lith->lock); |
| { |
| val = li_ad1843_wait(lith); |
| if (val == 0) { |
| li_writel(lith, LI_CODEC_COMMAND, LI_CC_DIR_RD | reg); |
| val = li_ad1843_wait(lith); |
| } |
| if (val == 0) |
| val = li_readl(lith, LI_CODEC_DATA); |
| } |
| spin_unlock(&lith->lock); |
| |
| DBGXV("li_read_ad1843_reg(lith=0x%p, reg=%d) returns 0x%04x\n", |
| lith, reg, val); |
| |
| return val; |
| } |
| |
| /* |
| * li_write_ad1843_reg writes the specified value to a 16 bit AD1843 register. |
| */ |
| |
| static void li_write_ad1843_reg(lithium_t *lith, int reg, int newval) |
| { |
| spin_lock(&lith->lock); |
| { |
| if (li_ad1843_wait(lith) == 0) { |
| li_writel(lith, LI_CODEC_DATA, newval); |
| li_writel(lith, LI_CODEC_COMMAND, LI_CC_DIR_WR | reg); |
| } |
| } |
| spin_unlock(&lith->lock); |
| } |
| |
| /* |
| * li_setup_dma calculates all the register settings for DMA in a particular |
| * mode. It takes too many arguments. |
| */ |
| |
| static void li_setup_dma(dma_chan_t *chan, |
| const dma_chan_desc_t *desc, |
| lithium_t *lith, |
| unsigned long buffer_paddr, |
| int bufshift, |
| int fragshift, |
| int channels, |
| int sampsize) |
| { |
| unsigned long mode, format; |
| unsigned long size, tmask; |
| |
| DBGEV("(chan=0x%p, desc=0x%p, lith=0x%p, buffer_paddr=0x%lx, " |
| "bufshift=%d, fragshift=%d, channels=%d, sampsize=%d)\n", |
| chan, desc, lith, buffer_paddr, |
| bufshift, fragshift, channels, sampsize); |
| |
| /* Reset the channel first. */ |
| |
| li_writel(lith, desc->ctlreg, LI_CCTL_RESET); |
| |
| ASSERT(channels == 1 || channels == 2); |
| if (channels == 2) |
| mode = LI_CCFG_MODE_STEREO; |
| else |
| mode = LI_CCFG_MODE_MONO; |
| ASSERT(sampsize == 1 || sampsize == 2); |
| if (sampsize == 2) |
| format = LI_CCFG_FMT_16BIT; |
| else |
| format = LI_CCFG_FMT_8BIT; |
| chan->desc = desc; |
| chan->lith = lith; |
| |
| /* |
| * Lithium DMA address register takes a 40-bit physical |
| * address, right-shifted by 8 so it fits in 32 bits. Bit 37 |
| * must be set -- it enables cache coherence. |
| */ |
| |
| ASSERT(!(buffer_paddr & 0xFF)); |
| chan->baseval = (buffer_paddr >> 8) | 1 << (37 - 8); |
| |
| chan->cfgval = ((chan->cfgval & ~LI_CCFG_LOCK) | |
| SHIFT_FIELD(desc->ad1843_slot, LI_CCFG_SLOT) | |
| desc->direction | |
| mode | |
| format); |
| |
| size = bufshift - 6; |
| tmask = 13 - fragshift; /* See Lithium DMA Notes above. */ |
| ASSERT(size >= 2 && size <= 7); |
| ASSERT(tmask >= 1 && tmask <= 7); |
| chan->ctlval = ((chan->ctlval & ~LI_CCTL_RESET) | |
| SHIFT_FIELD(size, LI_CCTL_SIZE) | |
| (chan->ctlval & ~LI_CCTL_DMA_ENABLE) | |
| SHIFT_FIELD(tmask, LI_CCTL_TMASK) | |
| SHIFT_FIELD(0, LI_CCTL_TPTR)); |
| |
| DBGPV("basereg 0x%x = 0x%lx\n", desc->basereg, chan->baseval); |
| DBGPV("cfgreg 0x%x = 0x%lx\n", desc->cfgreg, chan->cfgval); |
| DBGPV("ctlreg 0x%x = 0x%lx\n", desc->ctlreg, chan->ctlval); |
| |
| li_writel(lith, desc->basereg, chan->baseval); |
| li_writel(lith, desc->cfgreg, chan->cfgval); |
| li_writel(lith, desc->ctlreg, chan->ctlval); |
| |
| DBGRV(); |
| } |
| |
| static void li_shutdown_dma(dma_chan_t *chan) |
| { |
| lithium_t *lith = chan->lith; |
| void * lith1 = lith->page1; |
| |
| DBGEV("(chan=0x%p)\n", chan); |
| |
| chan->ctlval &= ~LI_CCTL_DMA_ENABLE; |
| DBGPV("ctlreg 0x%x = 0x%lx\n", chan->desc->ctlreg, chan->ctlval); |
| li_writel(lith, chan->desc->ctlreg, chan->ctlval); |
| |
| /* |
| * Offset 0x500 on Lithium page 1 is an undocumented, |
| * unsupported register that holds the zero sample value. |
| * Lithium is supposed to output zero samples when DMA is |
| * inactive, and repeat the last sample when DMA underflows. |
| * But it has a bug, where, after underflow occurs, the zero |
| * sample is not reset. |
| * |
| * I expect this to break in a future rev of Lithium. |
| */ |
| |
| if (lith1 && chan->desc->direction == LI_CCFG_DIR_OUT) |
| * (volatile unsigned long *) (lith1 + 0x500) = 0; |
| } |
| |
| /* |
| * li_activate_dma always starts dma at the beginning of the buffer. |
| * |
| * N.B., these may be called from interrupt. |
| */ |
| |
| static __inline__ void li_activate_dma(dma_chan_t *chan) |
| { |
| chan->ctlval |= LI_CCTL_DMA_ENABLE; |
| DBGPV("ctlval = 0x%lx\n", chan->ctlval); |
| li_writel(chan->lith, chan->desc->ctlreg, chan->ctlval); |
| } |
| |
| static void li_deactivate_dma(dma_chan_t *chan) |
| { |
| lithium_t *lith = chan->lith; |
| void * lith2 = lith->page2; |
| |
| chan->ctlval &= ~(LI_CCTL_DMA_ENABLE | LI_CCTL_RPTR | LI_CCTL_WPTR); |
| DBGPV("ctlval = 0x%lx\n", chan->ctlval); |
| DBGPV("ctlreg 0x%x = 0x%lx\n", chan->desc->ctlreg, chan->ctlval); |
| li_writel(lith, chan->desc->ctlreg, chan->ctlval); |
| |
| /* |
| * Offsets 0x98 and 0x9C on Lithium page 2 are undocumented, |
| * unsupported registers that are internal copies of the DMA |
| * read and write pointers. Because of a Lithium bug, these |
| * registers aren't zeroed correctly when DMA is shut off. So |
| * we whack them directly. |
| * |
| * I expect this to break in a future rev of Lithium. |
| */ |
| |
| if (lith2 && chan->desc->direction == LI_CCFG_DIR_OUT) { |
| * (volatile unsigned long *) (lith2 + 0x98) = 0; |
| * (volatile unsigned long *) (lith2 + 0x9C) = 0; |
| } |
| } |
| |
| /* |
| * read/write the ring buffer pointers. These routines' arguments and results |
| * are byte offsets from the beginning of the ring buffer. |
| */ |
| |
| static __inline__ int li_read_swptr(dma_chan_t *chan) |
| { |
| const unsigned long mask = chan->desc->swptrmask; |
| |
| return CHUNKS_TO_BYTES(UNSHIFT_FIELD(chan->ctlval, mask)); |
| } |
| |
| static __inline__ int li_read_hwptr(dma_chan_t *chan) |
| { |
| return CHUNKS_TO_BYTES(li_readb(chan->lith, chan->desc->hwptrreg)); |
| } |
| |
| static __inline__ void li_write_swptr(dma_chan_t *chan, int val) |
| { |
| const unsigned long mask = chan->desc->swptrmask; |
| |
| ASSERT(!(val & ~CHUNKS_TO_BYTES(0xFF))); |
| val = BYTES_TO_CHUNKS(val); |
| chan->ctlval = (chan->ctlval & ~mask) | SHIFT_FIELD(val, mask); |
| li_writeb(chan->lith, chan->desc->swptrreg, val); |
| } |
| |
| /* li_read_USTMSC() returns a UST/MSC pair for the given channel. */ |
| |
| static void li_read_USTMSC(dma_chan_t *chan, ustmsc_t *ustmsc) |
| { |
| lithium_t *lith = chan->lith; |
| const dma_chan_desc_t *desc = chan->desc; |
| unsigned long now_low, now_high0, now_high1, chan_ust; |
| |
| spin_lock(&lith->lock); |
| { |
| /* |
| * retry until we do all five reads without the |
| * high word changing. (High word increments |
| * every 2^32 microseconds, i.e., not often) |
| */ |
| do { |
| now_high0 = li_readl(lith, LI_UST_HIGH); |
| now_low = li_readl(lith, LI_UST_LOW); |
| |
| /* |
| * Lithium guarantees these two reads will be |
| * atomic -- ust will not increment after msc |
| * is read. |
| */ |
| |
| ustmsc->msc = li_readl(lith, desc->mscreg); |
| chan_ust = li_readl(lith, desc->ustreg); |
| |
| now_high1 = li_readl(lith, LI_UST_HIGH); |
| } while (now_high0 != now_high1); |
| } |
| spin_unlock(&lith->lock); |
| ustmsc->ust = ((unsigned long long) now_high0 << 32 | chan_ust); |
| } |
| |
| static void li_enable_interrupts(lithium_t *lith, unsigned int mask) |
| { |
| DBGEV("(lith=0x%p, mask=0x%x)\n", lith, mask); |
| |
| /* clear any already-pending interrupts. */ |
| |
| li_writel(lith, LI_INTR_STATUS, mask); |
| |
| /* enable the interrupts. */ |
| |
| mask |= li_readl(lith, LI_INTR_MASK); |
| li_writel(lith, LI_INTR_MASK, mask); |
| } |
| |
| static void li_disable_interrupts(lithium_t *lith, unsigned int mask) |
| { |
| unsigned int keepmask; |
| |
| DBGEV("(lith=0x%p, mask=0x%x)\n", lith, mask); |
| |
| /* disable the interrupts */ |
| |
| keepmask = li_readl(lith, LI_INTR_MASK) & ~mask; |
| li_writel(lith, LI_INTR_MASK, keepmask); |
| |
| /* clear any pending interrupts. */ |
| |
| li_writel(lith, LI_INTR_STATUS, mask); |
| } |
| |
| /* Get the interrupt status and clear all pending interrupts. */ |
| |
| static unsigned int li_get_clear_intr_status(lithium_t *lith) |
| { |
| unsigned int status; |
| |
| status = li_readl(lith, LI_INTR_STATUS); |
| li_writel(lith, LI_INTR_STATUS, ~0); |
| return status & li_readl(lith, LI_INTR_MASK); |
| } |
| |
| static int li_init(lithium_t *lith) |
| { |
| /* 1. System power supplies stabilize. */ |
| |
| /* 2. Assert the ~RESET signal. */ |
| |
| li_writel(lith, LI_HOST_CONTROLLER, LI_HC_RESET); |
| udelay(1); |
| |
| /* 3. Deassert the ~RESET signal and enter a wait period to allow |
| the AD1843 internal clocks and the external crystal oscillator |
| to stabilize. */ |
| |
| li_writel(lith, LI_HOST_CONTROLLER, LI_HC_LINK_ENABLE); |
| udelay(1); |
| |
| return 0; |
| } |
| |
| /*****************************************************************************/ |
| /* AD1843 access */ |
| |
| /* |
| * AD1843 bitfield definitions. All are named as in the AD1843 data |
| * sheet, with ad1843_ prepended and individual bit numbers removed. |
| * |
| * E.g., bits LSS0 through LSS2 become ad1843_LSS. |
| * |
| * Only the bitfields we need are defined. |
| */ |
| |
| typedef struct ad1843_bitfield { |
| char reg; |
| char lo_bit; |
| char nbits; |
| } ad1843_bitfield_t; |
| |
| static const ad1843_bitfield_t |
| ad1843_PDNO = { 0, 14, 1 }, /* Converter Power-Down Flag */ |
| ad1843_INIT = { 0, 15, 1 }, /* Clock Initialization Flag */ |
| ad1843_RIG = { 2, 0, 4 }, /* Right ADC Input Gain */ |
| ad1843_RMGE = { 2, 4, 1 }, /* Right ADC Mic Gain Enable */ |
| ad1843_RSS = { 2, 5, 3 }, /* Right ADC Source Select */ |
| ad1843_LIG = { 2, 8, 4 }, /* Left ADC Input Gain */ |
| ad1843_LMGE = { 2, 12, 1 }, /* Left ADC Mic Gain Enable */ |
| ad1843_LSS = { 2, 13, 3 }, /* Left ADC Source Select */ |
| ad1843_RX1M = { 4, 0, 5 }, /* Right Aux 1 Mix Gain/Atten */ |
| ad1843_RX1MM = { 4, 7, 1 }, /* Right Aux 1 Mix Mute */ |
| ad1843_LX1M = { 4, 8, 5 }, /* Left Aux 1 Mix Gain/Atten */ |
| ad1843_LX1MM = { 4, 15, 1 }, /* Left Aux 1 Mix Mute */ |
| ad1843_RX2M = { 5, 0, 5 }, /* Right Aux 2 Mix Gain/Atten */ |
| ad1843_RX2MM = { 5, 7, 1 }, /* Right Aux 2 Mix Mute */ |
| ad1843_LX2M = { 5, 8, 5 }, /* Left Aux 2 Mix Gain/Atten */ |
| ad1843_LX2MM = { 5, 15, 1 }, /* Left Aux 2 Mix Mute */ |
| ad1843_RMCM = { 7, 0, 5 }, /* Right Mic Mix Gain/Atten */ |
| ad1843_RMCMM = { 7, 7, 1 }, /* Right Mic Mix Mute */ |
| ad1843_LMCM = { 7, 8, 5 }, /* Left Mic Mix Gain/Atten */ |
| ad1843_LMCMM = { 7, 15, 1 }, /* Left Mic Mix Mute */ |
| ad1843_HPOS = { 8, 4, 1 }, /* Headphone Output Voltage Swing */ |
| ad1843_HPOM = { 8, 5, 1 }, /* Headphone Output Mute */ |
| ad1843_RDA1G = { 9, 0, 6 }, /* Right DAC1 Analog/Digital Gain */ |
| ad1843_RDA1GM = { 9, 7, 1 }, /* Right DAC1 Analog Mute */ |
| ad1843_LDA1G = { 9, 8, 6 }, /* Left DAC1 Analog/Digital Gain */ |
| ad1843_LDA1GM = { 9, 15, 1 }, /* Left DAC1 Analog Mute */ |
| ad1843_RDA1AM = { 11, 7, 1 }, /* Right DAC1 Digital Mute */ |
| ad1843_LDA1AM = { 11, 15, 1 }, /* Left DAC1 Digital Mute */ |
| ad1843_ADLC = { 15, 0, 2 }, /* ADC Left Sample Rate Source */ |
| ad1843_ADRC = { 15, 2, 2 }, /* ADC Right Sample Rate Source */ |
| ad1843_DA1C = { 15, 8, 2 }, /* DAC1 Sample Rate Source */ |
| ad1843_C1C = { 17, 0, 16 }, /* Clock 1 Sample Rate Select */ |
| ad1843_C2C = { 20, 0, 16 }, /* Clock 1 Sample Rate Select */ |
| ad1843_DAADL = { 25, 4, 2 }, /* Digital ADC Left Source Select */ |
| ad1843_DAADR = { 25, 6, 2 }, /* Digital ADC Right Source Select */ |
| ad1843_DRSFLT = { 25, 15, 1 }, /* Digital Reampler Filter Mode */ |
| ad1843_ADLF = { 26, 0, 2 }, /* ADC Left Channel Data Format */ |
| ad1843_ADRF = { 26, 2, 2 }, /* ADC Right Channel Data Format */ |
| ad1843_ADTLK = { 26, 4, 1 }, /* ADC Transmit Lock Mode Select */ |
| ad1843_SCF = { 26, 7, 1 }, /* SCLK Frequency Select */ |
| ad1843_DA1F = { 26, 8, 2 }, /* DAC1 Data Format Select */ |
| ad1843_DA1SM = { 26, 14, 1 }, /* DAC1 Stereo/Mono Mode Select */ |
| ad1843_ADLEN = { 27, 0, 1 }, /* ADC Left Channel Enable */ |
| ad1843_ADREN = { 27, 1, 1 }, /* ADC Right Channel Enable */ |
| ad1843_AAMEN = { 27, 4, 1 }, /* Analog to Analog Mix Enable */ |
| ad1843_ANAEN = { 27, 7, 1 }, /* Analog Channel Enable */ |
| ad1843_DA1EN = { 27, 8, 1 }, /* DAC1 Enable */ |
| ad1843_DA2EN = { 27, 9, 1 }, /* DAC2 Enable */ |
| ad1843_C1EN = { 28, 11, 1 }, /* Clock Generator 1 Enable */ |
| ad1843_C2EN = { 28, 12, 1 }, /* Clock Generator 2 Enable */ |
| ad1843_PDNI = { 28, 15, 1 }; /* Converter Power Down */ |
| |
| /* |
| * The various registers of the AD1843 use three different formats for |
| * specifying gain. The ad1843_gain structure parameterizes the |
| * formats. |
| */ |
| |
| typedef struct ad1843_gain { |
| |
| int negative; /* nonzero if gain is negative. */ |
| const ad1843_bitfield_t *lfield; |
| const ad1843_bitfield_t *rfield; |
| |
| } ad1843_gain_t; |
| |
| static const ad1843_gain_t ad1843_gain_RECLEV |
| = { 0, &ad1843_LIG, &ad1843_RIG }; |
| static const ad1843_gain_t ad1843_gain_LINE |
| = { 1, &ad1843_LX1M, &ad1843_RX1M }; |
| static const ad1843_gain_t ad1843_gain_CD |
| = { 1, &ad1843_LX2M, &ad1843_RX2M }; |
| static const ad1843_gain_t ad1843_gain_MIC |
| = { 1, &ad1843_LMCM, &ad1843_RMCM }; |
| static const ad1843_gain_t ad1843_gain_PCM |
| = { 1, &ad1843_LDA1G, &ad1843_RDA1G }; |
| |
| /* read the current value of an AD1843 bitfield. */ |
| |
| static int ad1843_read_bits(lithium_t *lith, const ad1843_bitfield_t *field) |
| { |
| int w = li_read_ad1843_reg(lith, field->reg); |
| int val = w >> field->lo_bit & ((1 << field->nbits) - 1); |
| |
| DBGXV("ad1843_read_bits(lith=0x%p, field->{%d %d %d}) returns 0x%x\n", |
| lith, field->reg, field->lo_bit, field->nbits, val); |
| |
| return val; |
| } |
| |
| /* |
| * write a new value to an AD1843 bitfield and return the old value. |
| */ |
| |
| static int ad1843_write_bits(lithium_t *lith, |
| const ad1843_bitfield_t *field, |
| int newval) |
| { |
| int w = li_read_ad1843_reg(lith, field->reg); |
| int mask = ((1 << field->nbits) - 1) << field->lo_bit; |
| int oldval = (w & mask) >> field->lo_bit; |
| int newbits = (newval << field->lo_bit) & mask; |
| w = (w & ~mask) | newbits; |
| (void) li_write_ad1843_reg(lith, field->reg, w); |
| |
| DBGXV("ad1843_write_bits(lith=0x%p, field->{%d %d %d}, val=0x%x) " |
| "returns 0x%x\n", |
| lith, field->reg, field->lo_bit, field->nbits, newval, |
| oldval); |
| |
| return oldval; |
| } |
| |
| /* |
| * ad1843_read_multi reads multiple bitfields from the same AD1843 |
| * register. It uses a single read cycle to do it. (Reading the |
| * ad1843 requires 256 bit times at 12.288 MHz, or nearly 20 |
| * microseconds.) |
| * |
| * Called ike this. |
| * |
| * ad1843_read_multi(lith, nfields, |
| * &ad1843_FIELD1, &val1, |
| * &ad1843_FIELD2, &val2, ...); |
| */ |
| |
| static void ad1843_read_multi(lithium_t *lith, int argcount, ...) |
| { |
| va_list ap; |
| const ad1843_bitfield_t *fp; |
| int w = 0, mask, *value, reg = -1; |
| |
| va_start(ap, argcount); |
| while (--argcount >= 0) { |
| fp = va_arg(ap, const ad1843_bitfield_t *); |
| value = va_arg(ap, int *); |
| if (reg == -1) { |
| reg = fp->reg; |
| w = li_read_ad1843_reg(lith, reg); |
| } |
| ASSERT(reg == fp->reg); |
| mask = (1 << fp->nbits) - 1; |
| *value = w >> fp->lo_bit & mask; |
| } |
| va_end(ap); |
| } |
| |
| /* |
| * ad1843_write_multi stores multiple bitfields into the same AD1843 |
| * register. It uses one read and one write cycle to do it. |
| * |
| * Called like this. |
| * |
| * ad1843_write_multi(lith, nfields, |
| * &ad1843_FIELD1, val1, |
| * &ad1843_FIELF2, val2, ...); |
| */ |
| |
| static void ad1843_write_multi(lithium_t *lith, int argcount, ...) |
| { |
| va_list ap; |
| int reg; |
| const ad1843_bitfield_t *fp; |
| int value; |
| int w, m, mask, bits; |
| |
| mask = 0; |
| bits = 0; |
| reg = -1; |
| |
| va_start(ap, argcount); |
| while (--argcount >= 0) { |
| fp = va_arg(ap, const ad1843_bitfield_t *); |
| value = va_arg(ap, int); |
| if (reg == -1) |
| reg = fp->reg; |
| ASSERT(fp->reg == reg); |
| m = ((1 << fp->nbits) - 1) << fp->lo_bit; |
| mask |= m; |
| bits |= (value << fp->lo_bit) & m; |
| } |
| va_end(ap); |
| ASSERT(!(bits & ~mask)); |
| if (~mask & 0xFFFF) |
| w = li_read_ad1843_reg(lith, reg); |
| else |
| w = 0; |
| w = (w & ~mask) | bits; |
| (void) li_write_ad1843_reg(lith, reg, w); |
| } |
| |
| /* |
| * ad1843_get_gain reads the specified register and extracts the gain value |
| * using the supplied gain type. It returns the gain in OSS format. |
| */ |
| |
| static int ad1843_get_gain(lithium_t *lith, const ad1843_gain_t *gp) |
| { |
| int lg, rg; |
| unsigned short mask = (1 << gp->lfield->nbits) - 1; |
| |
| ad1843_read_multi(lith, 2, gp->lfield, &lg, gp->rfield, &rg); |
| if (gp->negative) { |
| lg = mask - lg; |
| rg = mask - rg; |
| } |
| lg = (lg * 100 + (mask >> 1)) / mask; |
| rg = (rg * 100 + (mask >> 1)) / mask; |
| return lg << 0 | rg << 8; |
| } |
| |
| /* |
| * Set an audio channel's gain. Converts from OSS format to AD1843's |
| * format. |
| * |
| * Returns the new gain, which may be lower than the old gain. |
| */ |
| |
| static int ad1843_set_gain(lithium_t *lith, |
| const ad1843_gain_t *gp, |
| int newval) |
| { |
| unsigned short mask = (1 << gp->lfield->nbits) - 1; |
| |
| int lg = newval >> 0 & 0xFF; |
| int rg = newval >> 8; |
| if (lg < 0 || lg > 100 || rg < 0 || rg > 100) |
| return -EINVAL; |
| lg = (lg * mask + (mask >> 1)) / 100; |
| rg = (rg * mask + (mask >> 1)) / 100; |
| if (gp->negative) { |
| lg = mask - lg; |
| rg = mask - rg; |
| } |
| ad1843_write_multi(lith, 2, gp->lfield, lg, gp->rfield, rg); |
| return ad1843_get_gain(lith, gp); |
| } |
| |
| /* Returns the current recording source, in OSS format. */ |
| |
| static int ad1843_get_recsrc(lithium_t *lith) |
| { |
| int ls = ad1843_read_bits(lith, &ad1843_LSS); |
| |
| switch (ls) { |
| case 1: |
| return SOUND_MASK_MIC; |
| case 2: |
| return SOUND_MASK_LINE; |
| case 3: |
| return SOUND_MASK_CD; |
| case 6: |
| return SOUND_MASK_PCM; |
| default: |
| ASSERT(0); |
| return -1; |
| } |
| } |
| |
| /* |
| * Enable/disable digital resample mode in the AD1843. |
| * |
| * The AD1843 requires that ADL, ADR, DA1 and DA2 be powered down |
| * while switching modes. So we save DA1's state (DA2's state is not |
| * interesting), power them down, switch into/out of resample mode, |
| * power them up, and restore state. |
| * |
| * This will cause audible glitches if D/A or A/D is going on, so the |
| * driver disallows that (in mixer_write_ioctl()). |
| * |
| * The open question is, is this worth doing? I'm leaving it in, |
| * because it's written, but... |
| */ |
| |
| static void ad1843_set_resample_mode(lithium_t *lith, int onoff) |
| { |
| /* Save DA1 mute and gain (addr 9 is DA1 analog gain/attenuation) */ |
| int save_da1 = li_read_ad1843_reg(lith, 9); |
| |
| /* Power down A/D and D/A. */ |
| ad1843_write_multi(lith, 4, |
| &ad1843_DA1EN, 0, |
| &ad1843_DA2EN, 0, |
| &ad1843_ADLEN, 0, |
| &ad1843_ADREN, 0); |
| |
| /* Switch mode */ |
| ASSERT(onoff == 0 || onoff == 1); |
| ad1843_write_bits(lith, &ad1843_DRSFLT, onoff); |
| |
| /* Power up A/D and D/A. */ |
| ad1843_write_multi(lith, 3, |
| &ad1843_DA1EN, 1, |
| &ad1843_ADLEN, 1, |
| &ad1843_ADREN, 1); |
| |
| /* Restore DA1 mute and gain. */ |
| li_write_ad1843_reg(lith, 9, save_da1); |
| } |
| |
| /* |
| * Set recording source. Arg newsrc specifies an OSS channel mask. |
| * |
| * The complication is that when we switch into/out of loopback mode |
| * (i.e., src = SOUND_MASK_PCM), we change the AD1843 into/out of |
| * digital resampling mode. |
| * |
| * Returns newsrc on success, -errno on failure. |
| */ |
| |
| static int ad1843_set_recsrc(lithium_t *lith, int newsrc) |
| { |
| int bits; |
| int oldbits; |
| |
| switch (newsrc) { |
| case SOUND_MASK_PCM: |
| bits = 6; |
| break; |
| |
| case SOUND_MASK_MIC: |
| bits = 1; |
| break; |
| |
| case SOUND_MASK_LINE: |
| bits = 2; |
| break; |
| |
| case SOUND_MASK_CD: |
| bits = 3; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| oldbits = ad1843_read_bits(lith, &ad1843_LSS); |
| if (newsrc == SOUND_MASK_PCM && oldbits != 6) { |
| DBGP("enabling digital resample mode\n"); |
| ad1843_set_resample_mode(lith, 1); |
| ad1843_write_multi(lith, 2, |
| &ad1843_DAADL, 2, |
| &ad1843_DAADR, 2); |
| } else if (newsrc != SOUND_MASK_PCM && oldbits == 6) { |
| DBGP("disabling digital resample mode\n"); |
| ad1843_set_resample_mode(lith, 0); |
| ad1843_write_multi(lith, 2, |
| &ad1843_DAADL, 0, |
| &ad1843_DAADR, 0); |
| } |
| ad1843_write_multi(lith, 2, &ad1843_LSS, bits, &ad1843_RSS, bits); |
| return newsrc; |
| } |
| |
| /* |
| * Return current output sources, in OSS format. |
| */ |
| |
| static int ad1843_get_outsrc(lithium_t *lith) |
| { |
| int pcm, line, mic, cd; |
| |
| pcm = ad1843_read_bits(lith, &ad1843_LDA1GM) ? 0 : SOUND_MASK_PCM; |
| line = ad1843_read_bits(lith, &ad1843_LX1MM) ? 0 : SOUND_MASK_LINE; |
| cd = ad1843_read_bits(lith, &ad1843_LX2MM) ? 0 : SOUND_MASK_CD; |
| mic = ad1843_read_bits(lith, &ad1843_LMCMM) ? 0 : SOUND_MASK_MIC; |
| |
| return pcm | line | cd | mic; |
| } |
| |
| /* |
| * Set output sources. Arg is a mask of active sources in OSS format. |
| * |
| * Returns source mask on success, -errno on failure. |
| */ |
| |
| static int ad1843_set_outsrc(lithium_t *lith, int mask) |
| { |
| int pcm, line, mic, cd; |
| |
| if (mask & ~(SOUND_MASK_PCM | SOUND_MASK_LINE | |
| SOUND_MASK_CD | SOUND_MASK_MIC)) |
| return -EINVAL; |
| pcm = (mask & SOUND_MASK_PCM) ? 0 : 1; |
| line = (mask & SOUND_MASK_LINE) ? 0 : 1; |
| mic = (mask & SOUND_MASK_MIC) ? 0 : 1; |
| cd = (mask & SOUND_MASK_CD) ? 0 : 1; |
| |
| ad1843_write_multi(lith, 2, &ad1843_LDA1GM, pcm, &ad1843_RDA1GM, pcm); |
| ad1843_write_multi(lith, 2, &ad1843_LX1MM, line, &ad1843_RX1MM, line); |
| ad1843_write_multi(lith, 2, &ad1843_LX2MM, cd, &ad1843_RX2MM, cd); |
| ad1843_write_multi(lith, 2, &ad1843_LMCMM, mic, &ad1843_RMCMM, mic); |
| |
| return mask; |
| } |
| |
| /* Setup ad1843 for D/A conversion. */ |
| |
| static void ad1843_setup_dac(lithium_t *lith, |
| int framerate, |
| int fmt, |
| int channels) |
| { |
| int ad_fmt = 0, ad_mode = 0; |
| |
| DBGEV("(lith=0x%p, framerate=%d, fmt=%d, channels=%d)\n", |
| lith, framerate, fmt, channels); |
| |
| switch (fmt) { |
| case AFMT_S8: ad_fmt = 1; break; |
| case AFMT_U8: ad_fmt = 1; break; |
| case AFMT_S16_LE: ad_fmt = 1; break; |
| case AFMT_MU_LAW: ad_fmt = 2; break; |
| case AFMT_A_LAW: ad_fmt = 3; break; |
| default: ASSERT(0); |
| } |
| |
| switch (channels) { |
| case 2: ad_mode = 0; break; |
| case 1: ad_mode = 1; break; |
| default: ASSERT(0); |
| } |
| |
| DBGPV("ad_mode = %d, ad_fmt = %d\n", ad_mode, ad_fmt); |
| ASSERT(framerate >= 4000 && framerate <= 49000); |
| ad1843_write_bits(lith, &ad1843_C1C, framerate); |
| ad1843_write_multi(lith, 2, |
| &ad1843_DA1SM, ad_mode, &ad1843_DA1F, ad_fmt); |
| } |
| |
| static void ad1843_shutdown_dac(lithium_t *lith) |
| { |
| ad1843_write_bits(lith, &ad1843_DA1F, 1); |
| } |
| |
| static void ad1843_setup_adc(lithium_t *lith, int framerate, int fmt, int channels) |
| { |
| int da_fmt = 0; |
| |
| DBGEV("(lith=0x%p, framerate=%d, fmt=%d, channels=%d)\n", |
| lith, framerate, fmt, channels); |
| |
| switch (fmt) { |
| case AFMT_S8: da_fmt = 1; break; |
| case AFMT_U8: da_fmt = 1; break; |
| case AFMT_S16_LE: da_fmt = 1; break; |
| case AFMT_MU_LAW: da_fmt = 2; break; |
| case AFMT_A_LAW: da_fmt = 3; break; |
| default: ASSERT(0); |
| } |
| |
| DBGPV("da_fmt = %d\n", da_fmt); |
| ASSERT(framerate >= 4000 && framerate <= 49000); |
| ad1843_write_bits(lith, &ad1843_C2C, framerate); |
| ad1843_write_multi(lith, 2, |
| &ad1843_ADLF, da_fmt, &ad1843_ADRF, da_fmt); |
| } |
| |
| static void ad1843_shutdown_adc(lithium_t *lith) |
| { |
| /* nothing to do */ |
| } |
| |
| /* |
| * Fully initialize the ad1843. As described in the AD1843 data |
| * sheet, section "START-UP SEQUENCE". The numbered comments are |
| * subsection headings from the data sheet. See the data sheet, pages |
| * 52-54, for more info. |
| * |
| * return 0 on success, -errno on failure. */ |
| |
| static int __init ad1843_init(lithium_t *lith) |
| { |
| unsigned long later; |
| int err; |
| |
| err = li_init(lith); |
| if (err) |
| return err; |
| |
| if (ad1843_read_bits(lith, &ad1843_INIT) != 0) { |
| printk(KERN_ERR "vwsnd sound: AD1843 won't initialize\n"); |
| return -EIO; |
| } |
| |
| ad1843_write_bits(lith, &ad1843_SCF, 1); |
| |
| /* 4. Put the conversion resources into standby. */ |
| |
| ad1843_write_bits(lith, &ad1843_PDNI, 0); |
| later = jiffies + HZ / 2; /* roughly half a second */ |
| DBGDO(shut_up++); |
| while (ad1843_read_bits(lith, &ad1843_PDNO)) { |
| if (time_after(jiffies, later)) { |
| printk(KERN_ERR |
| "vwsnd audio: AD1843 won't power up\n"); |
| return -EIO; |
| } |
| schedule(); |
| } |
| DBGDO(shut_up--); |
| |
| /* 5. Power up the clock generators and enable clock output pins. */ |
| |
| ad1843_write_multi(lith, 2, &ad1843_C1EN, 1, &ad1843_C2EN, 1); |
| |
| /* 6. Configure conversion resources while they are in standby. */ |
| |
| /* DAC1 uses clock 1 as source, ADC uses clock 2. Always. */ |
| |
| ad1843_write_multi(lith, 3, |
| &ad1843_DA1C, 1, |
| &ad1843_ADLC, 2, |
| &ad1843_ADRC, 2); |
| |
| /* 7. Enable conversion resources. */ |
| |
| ad1843_write_bits(lith, &ad1843_ADTLK, 1); |
| ad1843_write_multi(lith, 5, |
| &ad1843_ANAEN, 1, |
| &ad1843_AAMEN, 1, |
| &ad1843_DA1EN, 1, |
| &ad1843_ADLEN, 1, |
| &ad1843_ADREN, 1); |
| |
| /* 8. Configure conversion resources while they are enabled. */ |
| |
| ad1843_write_bits(lith, &ad1843_DA1C, 1); |
| |
| /* Unmute all channels. */ |
| |
| ad1843_set_outsrc(lith, |
| (SOUND_MASK_PCM | SOUND_MASK_LINE | |
| SOUND_MASK_MIC | SOUND_MASK_CD)); |
| ad1843_write_multi(lith, 2, &ad1843_LDA1AM, 0, &ad1843_RDA1AM, 0); |
| |
| /* Set default recording source to Line In and set |
| * mic gain to +20 dB. |
| */ |
| |
| ad1843_set_recsrc(lith, SOUND_MASK_LINE); |
| ad1843_write_multi(lith, 2, &ad1843_LMGE, 1, &ad1843_RMGE, 1); |
| |
| /* Set Speaker Out level to +/- 4V and unmute it. */ |
| |
| ad1843_write_multi(lith, 2, &ad1843_HPOS, 1, &ad1843_HPOM, 0); |
| |
| return 0; |
| } |
| |
| /*****************************************************************************/ |
| /* PCM I/O */ |
| |
| #define READ_INTR_MASK (LI_INTR_COMM1_TRIG | LI_INTR_COMM1_OVERFLOW) |
| #define WRITE_INTR_MASK (LI_INTR_COMM2_TRIG | LI_INTR_COMM2_UNDERFLOW) |
| |
| typedef enum vwsnd_port_swstate { /* software state */ |
| SW_OFF, |
| SW_INITIAL, |
| SW_RUN, |
| SW_DRAIN, |
| } vwsnd_port_swstate_t; |
| |
| typedef enum vwsnd_port_hwstate { /* hardware state */ |
| HW_STOPPED, |
| HW_RUNNING, |
| } vwsnd_port_hwstate_t; |
| |
| /* |
| * These flags are read by ISR, but only written at baseline. |
| */ |
| |
| typedef enum vwsnd_port_flags { |
| DISABLED = 1 << 0, |
| ERFLOWN = 1 << 1, /* overflown or underflown */ |
| HW_BUSY = 1 << 2, |
| } vwsnd_port_flags_t; |
| |
| /* |
| * vwsnd_port is the per-port data structure. Each device has two |
| * ports, one for input and one for output. |
| * |
| * Locking: |
| * |
| * port->lock protects: hwstate, flags, swb_[iu]_avail. |
| * |
| * devc->io_mutex protects: swstate, sw_*, swb_[iu]_idx. |
| * |
| * everything else is only written by open/release or |
| * pcm_{setup,shutdown}(), which are serialized by a |
| * combination of devc->open_mutex and devc->io_mutex. |
| */ |
| |
| typedef struct vwsnd_port { |
| |
| spinlock_t lock; |
| wait_queue_head_t queue; |
| vwsnd_port_swstate_t swstate; |
| vwsnd_port_hwstate_t hwstate; |
| vwsnd_port_flags_t flags; |
| |
| int sw_channels; |
| int sw_samplefmt; |
| int sw_framerate; |
| int sample_size; |
| int frame_size; |
| unsigned int zero_word; /* zero for the sample format */ |
| |
| int sw_fragshift; |
| int sw_fragcount; |
| int sw_subdivshift; |
| |
| unsigned int hw_fragshift; |
| unsigned int hw_fragsize; |
| unsigned int hw_fragcount; |
| |
| int hwbuf_size; |
| unsigned long hwbuf_paddr; |
| unsigned long hwbuf_vaddr; |
| void * hwbuf; /* hwbuf == hwbuf_vaddr */ |
| int hwbuf_max; /* max bytes to preload */ |
| |
| void * swbuf; |
| unsigned int swbuf_size; /* size in bytes */ |
| unsigned int swb_u_idx; /* index of next user byte */ |
| unsigned int swb_i_idx; /* index of next intr byte */ |
| unsigned int swb_u_avail; /* # bytes avail to user */ |
| unsigned int swb_i_avail; /* # bytes avail to intr */ |
| |
| dma_chan_t chan; |
| |
| /* Accounting */ |
| |
| int byte_count; |
| int frag_count; |
| int MSC_offset; |
| |
| } vwsnd_port_t; |
| |
| /* vwsnd_dev is the per-device data structure. */ |
| |
| typedef struct vwsnd_dev { |
| struct vwsnd_dev *next_dev; |
| int audio_minor; /* minor number of audio device */ |
| int mixer_minor; /* minor number of mixer device */ |
| |
| struct mutex open_mutex; |
| struct mutex io_mutex; |
| struct mutex mix_mutex; |
| fmode_t open_mode; |
| wait_queue_head_t open_wait; |
| |
| lithium_t lith; |
| |
| vwsnd_port_t rport; |
| vwsnd_port_t wport; |
| } vwsnd_dev_t; |
| |
| static vwsnd_dev_t *vwsnd_dev_list; /* linked list of all devices */ |
| |
| static atomic_t vwsnd_use_count = ATOMIC_INIT(0); |
| |
| # define INC_USE_COUNT (atomic_inc(&vwsnd_use_count)) |
| # define DEC_USE_COUNT (atomic_dec(&vwsnd_use_count)) |
| # define IN_USE (atomic_read(&vwsnd_use_count) != 0) |
| |
| /* |
| * Lithium can only DMA multiples of 32 bytes. Its DMA buffer may |
| * be up to 8 Kb. This driver always uses 8 Kb. |
| * |
| * Memory bug workaround -- I'm not sure what's going on here, but |
| * somehow pcm_copy_out() was triggering segv's going on to the next |
| * page of the hw buffer. So, I make the hw buffer one size bigger |
| * than we actually use. That way, the following page is allocated |
| * and mapped, and no error. I suspect that something is broken |
| * in Cobalt, but haven't really investigated. HBO is the actual |
| * size of the buffer, and HWBUF_ORDER is what we allocate. |
| */ |
| |
| #define HWBUF_SHIFT 13 |
| #define HWBUF_SIZE (1 << HWBUF_SHIFT) |
| # define HBO (HWBUF_SHIFT > PAGE_SHIFT ? HWBUF_SHIFT - PAGE_SHIFT : 0) |
| # define HWBUF_ORDER (HBO + 1) /* next size bigger */ |
| #define MIN_SPEED 4000 |
| #define MAX_SPEED 49000 |
| |
| #define MIN_FRAGSHIFT (DMACHUNK_SHIFT + 1) |
| #define MAX_FRAGSHIFT (PAGE_SHIFT) |
| #define MIN_FRAGSIZE (1 << MIN_FRAGSHIFT) |
| #define MAX_FRAGSIZE (1 << MAX_FRAGSHIFT) |
| #define MIN_FRAGCOUNT(fragsize) 3 |
| #define MAX_FRAGCOUNT(fragsize) (32 * PAGE_SIZE / (fragsize)) |
| #define DEFAULT_FRAGSHIFT 12 |
| #define DEFAULT_FRAGCOUNT 16 |
| #define DEFAULT_SUBDIVSHIFT 0 |
| |
| /* |
| * The software buffer (swbuf) is a ring buffer shared between user |
| * level and interrupt level. Each level owns some of the bytes in |
| * the buffer, and may give bytes away by calling swb_inc_{u,i}(). |
| * User level calls _u for user, and interrupt level calls _i for |
| * interrupt. |
| * |
| * port->swb_{u,i}_avail is the number of bytes available to that level. |
| * |
| * port->swb_{u,i}_idx is the index of the first available byte in the |
| * buffer. |
| * |
| * Each level calls swb_inc_{u,i}() to atomically increment its index, |
| * recalculate the number of bytes available for both sides, and |
| * return the number of bytes available. Since each side can only |
| * give away bytes, the other side can only increase the number of |
| * bytes available to this side. Each side updates its own index |
| * variable, swb_{u,i}_idx, so no lock is needed to read it. |
| * |
| * To query the number of bytes available, call swb_inc_{u,i} with an |
| * increment of zero. |
| */ |
| |
| static __inline__ unsigned int __swb_inc_u(vwsnd_port_t *port, int inc) |
| { |
| if (inc) { |
| port->swb_u_idx += inc; |
| port->swb_u_idx %= port->swbuf_size; |
| port->swb_u_avail -= inc; |
| port->swb_i_avail += inc; |
| } |
| return port->swb_u_avail; |
| } |
| |
| static __inline__ unsigned int swb_inc_u(vwsnd_port_t *port, int inc) |
| { |
| unsigned long flags; |
| unsigned int ret; |
| |
| spin_lock_irqsave(&port->lock, flags); |
| { |
| ret = __swb_inc_u(port, inc); |
| } |
| spin_unlock_irqrestore(&port->lock, flags); |
| return ret; |
| } |
| |
| static __inline__ unsigned int __swb_inc_i(vwsnd_port_t *port, int inc) |
| { |
| if (inc) { |
| port->swb_i_idx += inc; |
| port->swb_i_idx %= port->swbuf_size; |
| port->swb_i_avail -= inc; |
| port->swb_u_avail += inc; |
| } |
| return port->swb_i_avail; |
| } |
| |
| static __inline__ unsigned int swb_inc_i(vwsnd_port_t *port, int inc) |
| { |
| unsigned long flags; |
| unsigned int ret; |
| |
| spin_lock_irqsave(&port->lock, flags); |
| { |
| ret = __swb_inc_i(port, inc); |
| } |
| spin_unlock_irqrestore(&port->lock, flags); |
| return ret; |
| } |
| |
| /* |
| * pcm_setup - this routine initializes all port state after |
| * mode-setting ioctls have been done, but before the first I/O is |
| * done. |
| * |
| * Locking: called with devc->io_mutex held. |
| * |
| * Returns 0 on success, -errno on failure. |
| */ |
| |
| static int pcm_setup(vwsnd_dev_t *devc, |
| vwsnd_port_t *rport, |
| vwsnd_port_t *wport) |
| { |
| vwsnd_port_t *aport = rport ? rport : wport; |
| int sample_size; |
| unsigned int zero_word; |
| |
| DBGEV("(devc=0x%p, rport=0x%p, wport=0x%p)\n", devc, rport, wport); |
| |
| ASSERT(aport != NULL); |
| if (aport->swbuf != NULL) |
| return 0; |
| switch (aport->sw_samplefmt) { |
| case AFMT_MU_LAW: |
| sample_size = 1; |
| zero_word = 0xFFFFFFFF ^ 0x80808080; |
| break; |
| |
| case AFMT_A_LAW: |
| sample_size = 1; |
| zero_word = 0xD5D5D5D5 ^ 0x80808080; |
| break; |
| |
| case AFMT_U8: |
| sample_size = 1; |
| zero_word = 0x80808080; |
| break; |
| |
| case AFMT_S8: |
| sample_size = 1; |
| zero_word = 0x00000000; |
| break; |
| |
| case AFMT_S16_LE: |
| sample_size = 2; |
| zero_word = 0x00000000; |
| break; |
| |
| default: |
| sample_size = 0; /* prevent compiler warning */ |
| zero_word = 0; |
| ASSERT(0); |
| } |
| aport->sample_size = sample_size; |
| aport->zero_word = zero_word; |
| aport->frame_size = aport->sw_channels * aport->sample_size; |
| aport->hw_fragshift = aport->sw_fragshift - aport->sw_subdivshift; |
| aport->hw_fragsize = 1 << aport->hw_fragshift; |
| aport->hw_fragcount = aport->sw_fragcount << aport->sw_subdivshift; |
| ASSERT(aport->hw_fragsize >= MIN_FRAGSIZE); |
| ASSERT(aport->hw_fragsize <= MAX_FRAGSIZE); |
| ASSERT(aport->hw_fragcount >= MIN_FRAGCOUNT(aport->hw_fragsize)); |
| ASSERT(aport->hw_fragcount <= MAX_FRAGCOUNT(aport->hw_fragsize)); |
| if (rport) { |
| int hwfrags, swfrags; |
| rport->hwbuf_max = aport->hwbuf_size - DMACHUNK_SIZE; |
| hwfrags = rport->hwbuf_max >> aport->hw_fragshift; |
| swfrags = aport->hw_fragcount - hwfrags; |
| if (swfrags < 2) |
| swfrags = 2; |
| rport->swbuf_size = swfrags * aport->hw_fragsize; |
| DBGPV("hwfrags = %d, swfrags = %d\n", hwfrags, swfrags); |
| DBGPV("read hwbuf_max = %d, swbuf_size = %d\n", |
| rport->hwbuf_max, rport->swbuf_size); |
| } |
| if (wport) { |
| int hwfrags, swfrags; |
| int total_bytes = aport->hw_fragcount * aport->hw_fragsize; |
| wport->hwbuf_max = aport->hwbuf_size - DMACHUNK_SIZE; |
| if (wport->hwbuf_max > total_bytes) |
| wport->hwbuf_max = total_bytes; |
| hwfrags = wport->hwbuf_max >> aport->hw_fragshift; |
| DBGPV("hwfrags = %d\n", hwfrags); |
| swfrags = aport->hw_fragcount - hwfrags; |
| if (swfrags < 2) |
| swfrags = 2; |
| wport->swbuf_size = swfrags * aport->hw_fragsize; |
| DBGPV("hwfrags = %d, swfrags = %d\n", hwfrags, swfrags); |
| DBGPV("write hwbuf_max = %d, swbuf_size = %d\n", |
| wport->hwbuf_max, wport->swbuf_size); |
| } |
| |
| aport->swb_u_idx = 0; |
| aport->swb_i_idx = 0; |
| aport->byte_count = 0; |
| |
| /* |
| * Is this a Cobalt bug? We need to make this buffer extend |
| * one page further than we actually use -- somehow memcpy |
| * causes an exceptoin otherwise. I suspect there's a bug in |
| * Cobalt (or somewhere) where it's generating a fault on a |
| * speculative load or something. Obviously, I haven't taken |
| * the time to track it down. |
| */ |
| |
| aport->swbuf = vmalloc(aport->swbuf_size + PAGE_SIZE); |
| if (!aport->swbuf) |
| return -ENOMEM; |
| if (rport && wport) { |
| ASSERT(aport == rport); |
| ASSERT(wport->swbuf == NULL); |
| /* One extra page - see comment above. */ |
| wport->swbuf = vmalloc(aport->swbuf_size + PAGE_SIZE); |
| if (!wport->swbuf) { |
| vfree(aport->swbuf); |
| aport->swbuf = NULL; |
| return -ENOMEM; |
| } |
| wport->sample_size = rport->sample_size; |
| wport->zero_word = rport->zero_word; |
| wport->frame_size = rport->frame_size; |
| wport->hw_fragshift = rport->hw_fragshift; |
| wport->hw_fragsize = rport->hw_fragsize; |
| wport->hw_fragcount = rport->hw_fragcount; |
| wport->swbuf_size = rport->swbuf_size; |
| wport->hwbuf_max = rport->hwbuf_max; |
| wport->swb_u_idx = rport->swb_u_idx; |
| wport->swb_i_idx = rport->swb_i_idx; |
| wport->byte_count = rport->byte_count; |
| } |
| if (rport) { |
| rport->swb_u_avail = 0; |
| rport->swb_i_avail = rport->swbuf_size; |
| rport->swstate = SW_RUN; |
| li_setup_dma(&rport->chan, |
| &li_comm1, |
| &devc->lith, |
| rport->hwbuf_paddr, |
| HWBUF_SHIFT, |
| rport->hw_fragshift, |
| rport->sw_channels, |
| rport->sample_size); |
| ad1843_setup_adc(&devc->lith, |
| rport->sw_framerate, |
| rport->sw_samplefmt, |
| rport->sw_channels); |
| li_enable_interrupts(&devc->lith, READ_INTR_MASK); |
| if (!(rport->flags & DISABLED)) { |
| ustmsc_t ustmsc; |
| rport->hwstate = HW_RUNNING; |
| li_activate_dma(&rport->chan); |
| li_read_USTMSC(&rport->chan, &ustmsc); |
| rport->MSC_offset = ustmsc.msc; |
| } |
| } |
| if (wport) { |
| if (wport->hwbuf_max > wport->swbuf_size) |
| wport->hwbuf_max = wport->swbuf_size; |
| wport->flags &= ~ERFLOWN; |
| wport->swb_u_avail = wport->swbuf_size; |
| wport->swb_i_avail = 0; |
| wport->swstate = SW_RUN; |
| li_setup_dma(&wport->chan, |
| &li_comm2, |
| &devc->lith, |
| wport->hwbuf_paddr, |
| HWBUF_SHIFT, |
| wport->hw_fragshift, |
| wport->sw_channels, |
| wport->sample_size); |
| ad1843_setup_dac(&devc->lith, |
| wport->sw_framerate, |
| wport->sw_samplefmt, |
| wport->sw_channels); |
| li_enable_interrupts(&devc->lith, WRITE_INTR_MASK); |
| } |
| DBGRV(); |
| return 0; |
| } |
| |
| /* |
| * pcm_shutdown_port - shut down one port (direction) for PCM I/O. |
| * Only called from pcm_shutdown. |
| */ |
| |
| static void pcm_shutdown_port(vwsnd_dev_t *devc, |
| vwsnd_port_t *aport, |
| unsigned int mask) |
| { |
| unsigned long flags; |
| vwsnd_port_hwstate_t hwstate; |
| DECLARE_WAITQUEUE(wait, current); |
| |
| aport->swstate = SW_INITIAL; |
| add_wait_queue(&aport->queue, &wait); |
| while (1) { |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| spin_lock_irqsave(&aport->lock, flags); |
| { |
| hwstate = aport->hwstate; |
| } |
| spin_unlock_irqrestore(&aport->lock, flags); |
| if (hwstate == HW_STOPPED) |
| break; |
| schedule(); |
| } |
| current->state = TASK_RUNNING; |
| remove_wait_queue(&aport->queue, &wait); |
| li_disable_interrupts(&devc->lith, mask); |
| if (aport == &devc->rport) |
| ad1843_shutdown_adc(&devc->lith); |
| else /* aport == &devc->wport) */ |
| ad1843_shutdown_dac(&devc->lith); |
| li_shutdown_dma(&aport->chan); |
| vfree(aport->swbuf); |
| aport->swbuf = NULL; |
| aport->byte_count = 0; |
| } |
| |
| /* |
| * pcm_shutdown undoes what pcm_setup did. |
| * Also sets the ports' swstate to newstate. |
| */ |
| |
| static void pcm_shutdown(vwsnd_dev_t *devc, |
| vwsnd_port_t *rport, |
| vwsnd_port_t *wport) |
| { |
| DBGEV("(devc=0x%p, rport=0x%p, wport=0x%p)\n", devc, rport, wport); |
| |
| if (rport && rport->swbuf) { |
| DBGPV("shutting down rport\n"); |
| pcm_shutdown_port(devc, rport, READ_INTR_MASK); |
| } |
| if (wport && wport->swbuf) { |
| DBGPV("shutting down wport\n"); |
| pcm_shutdown_port(devc, wport, WRITE_INTR_MASK); |
| } |
| DBGRV(); |
| } |
| |
| static void pcm_copy_in(vwsnd_port_t *rport, int swidx, int hwidx, int nb) |
| { |
| char *src = rport->hwbuf + hwidx; |
| char *dst = rport->swbuf + swidx; |
| int fmt = rport->sw_samplefmt; |
| |
| DBGPV("swidx = %d, hwidx = %d\n", swidx, hwidx); |
| ASSERT(rport->hwbuf != NULL); |
| ASSERT(rport->swbuf != NULL); |
| ASSERT(nb > 0 && (nb % 32) == 0); |
| ASSERT(swidx % 32 == 0 && hwidx % 32 == 0); |
| ASSERT(swidx >= 0 && swidx + nb <= rport->swbuf_size); |
| ASSERT(hwidx >= 0 && hwidx + nb <= rport->hwbuf_size); |
| |
| if (fmt == AFMT_MU_LAW || fmt == AFMT_A_LAW || fmt == AFMT_S8) { |
| |
| /* See Sample Format Notes above. */ |
| |
| char *end = src + nb; |
| while (src < end) |
| *dst++ = *src++ ^ 0x80; |
| } else |
| memcpy(dst, src, nb); |
| } |
| |
| static void pcm_copy_out(vwsnd_port_t *wport, int swidx, int hwidx, int nb) |
| { |
| char *src = wport->swbuf + swidx; |
| char *dst = wport->hwbuf + hwidx; |
| int fmt = wport->sw_samplefmt; |
| |
| ASSERT(nb > 0 && (nb % 32) == 0); |
| ASSERT(wport->hwbuf != NULL); |
| ASSERT(wport->swbuf != NULL); |
| ASSERT(swidx % 32 == 0 && hwidx % 32 == 0); |
| ASSERT(swidx >= 0 && swidx + nb <= wport->swbuf_size); |
| ASSERT(hwidx >= 0 && hwidx + nb <= wport->hwbuf_size); |
| if (fmt == AFMT_MU_LAW || fmt == AFMT_A_LAW || fmt == AFMT_S8) { |
| |
| /* See Sample Format Notes above. */ |
| |
| char *end = src + nb; |
| while (src < end) |
| *dst++ = *src++ ^ 0x80; |
| } else |
| memcpy(dst, src, nb); |
| } |
| |
| /* |
| * pcm_output() is called both from baselevel and from interrupt level. |
| * This is where audio frames are copied into the hardware-accessible |
| * ring buffer. |
| * |
| * Locking note: The part of this routine that figures out what to do |
| * holds wport->lock. The longer part releases wport->lock, but sets |
| * wport->flags & HW_BUSY. Afterward, it reacquires wport->lock, and |
| * checks for more work to do. |
| * |
| * If another thread calls pcm_output() while HW_BUSY is set, it |
| * returns immediately, knowing that the thread that set HW_BUSY will |
| * look for more work to do before returning. |
| * |
| * This has the advantage that port->lock is held for several short |
| * periods instead of one long period. Also, when pcm_output is |
| * called from base level, it reenables interrupts. |
| */ |
| |
| static void pcm_output(vwsnd_dev_t *devc, int erflown, int nb) |
| { |
| vwsnd_port_t *wport = &devc->wport; |
| const int hwmax = wport->hwbuf_max; |
| const int hwsize = wport->hwbuf_size; |
| const int swsize = wport->swbuf_size; |
| const int fragsize = wport->hw_fragsize; |
| unsigned long iflags; |
| |
| DBGEV("(devc=0x%p, erflown=%d, nb=%d)\n", devc, erflown, nb); |
| spin_lock_irqsave(&wport->lock, iflags); |
| if (erflown) |
| wport->flags |= ERFLOWN; |
| (void) __swb_inc_u(wport, nb); |
| if (wport->flags & HW_BUSY) { |
| spin_unlock_irqrestore(&wport->lock, iflags); |
| DBGPV("returning: HW BUSY\n"); |
| return; |
| } |
| if (wport->flags & DISABLED) { |
| spin_unlock_irqrestore(&wport->lock, iflags); |
| DBGPV("returning: DISABLED\n"); |
| return; |
| } |
| wport->flags |= HW_BUSY; |
| while (1) { |
| int swptr, hwptr, hw_avail, sw_avail, swidx; |
| vwsnd_port_hwstate_t hwstate = wport->hwstate; |
| vwsnd_port_swstate_t swstate = wport->swstate; |
| int hw_unavail; |
| ustmsc_t ustmsc; |
| |
| hwptr = li_read_hwptr(&wport->chan); |
| swptr = li_read_swptr(&wport->chan); |
| hw_unavail = (swptr - hwptr + hwsize) % hwsize; |
| hw_avail = (hwmax - hw_unavail) & -fragsize; |
| sw_avail = wport->swb_i_avail & -fragsize; |
| if (sw_avail && swstate == SW_RUN) { |
| if (wport->flags & ERFLOWN) { |
| wport->flags &= ~ERFLOWN; |
| } |
| } else if (swstate == SW_INITIAL || |
| swstate == SW_OFF || |
| (swstate == SW_DRAIN && |
| !sw_avail && |
| (wport->flags & ERFLOWN))) { |
| DBGP("stopping. hwstate = %d\n", hwstate); |
| if (hwstate != HW_STOPPED) { |
| li_deactivate_dma(&wport->chan); |
| wport->hwstate = HW_STOPPED; |
| } |
| wake_up(&wport->queue); |
| break; |
| } |
| if (!sw_avail || !hw_avail) |
| break; |
| spin_unlock_irqrestore(&wport->lock, iflags); |
| |
| /* |
| * We gave up the port lock, but we have the HW_BUSY flag. |
| * Proceed without accessing any nonlocal state. |
| * Do not exit the loop -- must check for more work. |
| */ |
| |
| swidx = wport->swb_i_idx; |
| nb = hw_avail; |
| if (nb > sw_avail) |
| nb = sw_avail; |
| if (nb > hwsize - swptr) |
| nb = hwsize - swptr; /* don't overflow hwbuf */ |
| if (nb > swsize - swidx) |
| nb = swsize - swidx; /* don't overflow swbuf */ |
| ASSERT(nb > 0); |
| if (nb % fragsize) { |
| DBGP("nb = %d, fragsize = %d\n", nb, fragsize); |
| DBGP("hw_avail = %d\n", hw_avail); |
| DBGP("sw_avail = %d\n", sw_avail); |
| DBGP("hwsize = %d, swptr = %d\n", hwsize, swptr); |
| DBGP("swsize = %d, swidx = %d\n", swsize, swidx); |
| } |
| ASSERT(!(nb % fragsize)); |
| DBGPV("copying swb[%d..%d] to hwb[%d..%d]\n", |
| swidx, swidx + nb, swptr, swptr + nb); |
| pcm_copy_out(wport, swidx, swptr, nb); |
| li_write_swptr(&wport->chan, (swptr + nb) % hwsize); |
| spin_lock_irqsave(&wport->lock, iflags); |
| if (hwstate == HW_STOPPED) { |
| DBGPV("starting\n"); |
| li_activate_dma(&wport->chan); |
| wport->hwstate = HW_RUNNING; |
| li_read_USTMSC(&wport->chan, &ustmsc); |
| ASSERT(wport->byte_count % wport->frame_size == 0); |
| wport->MSC_offset = ustmsc.msc - wport->byte_count / wport->frame_size; |
| } |
| __swb_inc_i(wport, nb); |
| wport->byte_count += nb; |
| wport->frag_count += nb / fragsize; |
| ASSERT(nb % fragsize == 0); |
| wake_up(&wport->queue); |
| } |
| wport->flags &= ~HW_BUSY; |
| spin_unlock_irqrestore(&wport->lock, iflags); |
| DBGRV(); |
| } |
| |
| /* |
| * pcm_input() is called both from baselevel and from interrupt level. |
| * This is where audio frames are copied out of the hardware-accessible |
| * ring buffer. |
| * |
| * Locking note: The part of this routine that figures out what to do |
| * holds rport->lock. The longer part releases rport->lock, but sets |
| * rport->flags & HW_BUSY. Afterward, it reacquires rport->lock, and |
| * checks for more work to do. |
| * |
| * If another thread calls pcm_input() while HW_BUSY is set, it |
| * returns immediately, knowing that the thread that set HW_BUSY will |
| * look for more work to do before returning. |
| * |
| * This has the advantage that port->lock is held for several short |
| * periods instead of one long period. Also, when pcm_input is |
| * called from base level, it reenables interrupts. |
| */ |
| |
| static void pcm_input(vwsnd_dev_t *devc, int erflown, int nb) |
| { |
| vwsnd_port_t *rport = &devc->rport; |
| const int hwmax = rport->hwbuf_max; |
| const int hwsize = rport->hwbuf_size; |
| const int swsize = rport->swbuf_size; |
| const int fragsize = rport->hw_fragsize; |
| unsigned long iflags; |
| |
| DBGEV("(devc=0x%p, erflown=%d, nb=%d)\n", devc, erflown, nb); |
| |
| spin_lock_irqsave(&rport->lock, iflags); |
| if (erflown) |
| rport->flags |= ERFLOWN; |
| (void) __swb_inc_u(rport, nb); |
| if (rport->flags & HW_BUSY || !rport->swbuf) { |
| spin_unlock_irqrestore(&rport->lock, iflags); |
| DBGPV("returning: HW BUSY or !swbuf\n"); |
| return; |
| } |
| if (rport->flags & DISABLED) { |
| spin_unlock_irqrestore(&rport->lock, iflags); |
| DBGPV("returning: DISABLED\n"); |
| return; |
| } |
| rport->flags |= HW_BUSY; |
| while (1) { |
| int swptr, hwptr, hw_avail, sw_avail, swidx; |
| vwsnd_port_hwstate_t hwstate = rport->hwstate; |
| vwsnd_port_swstate_t swstate = rport->swstate; |
| |
| hwptr = li_read_hwptr(&rport->chan); |
| swptr = li_read_swptr(&rport->chan); |
| hw_avail = (hwptr - swptr + hwsize) % hwsize & -fragsize; |
| if (hw_avail > hwmax) |
| hw_avail = hwmax; |
| sw_avail = rport->swb_i_avail & -fragsize; |
| if (swstate != SW_RUN) { |
| DBGP("stopping. hwstate = %d\n", hwstate); |
| if (hwstate != HW_STOPPED) { |
| li_deactivate_dma(&rport->chan); |
| rport->hwstate = HW_STOPPED; |
| } |
| wake_up(&rport->queue); |
| break; |
| } |
| if (!sw_avail || !hw_avail) |
| break; |
| spin_unlock_irqrestore(&rport->lock, iflags); |
| |
| /* |
| * We gave up the port lock, but we have the HW_BUSY flag. |
| * Proceed without accessing any nonlocal state. |
| * Do not exit the loop -- must check for more work. |
| */ |
| |
| swidx = rport->swb_i_idx; |
| nb = hw_avail; |
| if (nb > sw_avail) |
| nb = sw_avail; |
| if (nb > hwsize - swptr) |
| nb = hwsize - swptr; /* don't overflow hwbuf */ |
| if (nb > swsize - swidx) |
| nb = swsize - swidx; /* don't overflow swbuf */ |
| ASSERT(nb > 0); |
| if (nb % fragsize) { |
| DBGP("nb = %d, fragsize = %d\n", nb, fragsize); |
| DBGP("hw_avail = %d\n", hw_avail); |
| DBGP("sw_avail = %d\n", sw_avail); |
| DBGP("hwsize = %d, swptr = %d\n", hwsize, swptr); |
| DBGP("swsize = %d, swidx = %d\n", swsize, swidx); |
| } |
| ASSERT(!(nb % fragsize)); |
| DBGPV("copying hwb[%d..%d] to swb[%d..%d]\n", |
| swptr, swptr + nb, swidx, swidx + nb); |
| pcm_copy_in(rport, swidx, swptr, nb); |
| li_write_swptr(&rport->chan, (swptr + nb) % hwsize); |
| spin_lock_irqsave(&rport->lock, iflags); |
| __swb_inc_i(rport, nb); |
| rport->byte_count += nb; |
| rport->frag_count += nb / fragsize; |
| ASSERT(nb % fragsize == 0); |
| wake_up(&rport->queue); |
| } |
| rport->flags &= ~HW_BUSY; |
| spin_unlock_irqrestore(&rport->lock, iflags); |
| DBGRV(); |
| } |
| |
| /* |
| * pcm_flush_frag() writes zero samples to fill the current fragment, |
| * then flushes it to the hardware. |
| * |
| * It is only meaningful to flush output, not input. |
| */ |
| |
| static void pcm_flush_frag(vwsnd_dev_t *devc) |
| { |
| vwsnd_port_t *wport = &devc->wport; |
| |
| DBGPV("swstate = %d\n", wport->swstate); |
| if (wport->swstate == SW_RUN) { |
| int idx = wport->swb_u_idx; |
| int end = (idx + wport->hw_fragsize - 1) |
| >> wport->hw_fragshift |
| << wport->hw_fragshift; |
| int nb = end - idx; |
| DBGPV("clearing %d bytes\n", nb); |
| if (nb) |
| memset(wport->swbuf + idx, |
| (char) wport->zero_word, |
| nb); |
| wport->swstate = SW_DRAIN; |
| pcm_output(devc, 0, nb); |
| } |
| DBGRV(); |
| } |
| |
| /* |
| * Wait for output to drain. This sleeps uninterruptibly because |
| * there is nothing intelligent we can do if interrupted. This |
| * means the process will be delayed in responding to the signal. |
| */ |
| |
| static void pcm_write_sync(vwsnd_dev_t *devc) |
| { |
| vwsnd_port_t *wport = &devc->wport; |
| DECLARE_WAITQUEUE(wait, current); |
| unsigned long flags; |
| vwsnd_port_hwstate_t hwstate; |
| |
| DBGEV("(devc=0x%p)\n", devc); |
| add_wait_queue(&wport->queue, &wait); |
| while (1) { |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| spin_lock_irqsave(&wport->lock, flags); |
| { |
| hwstate = wport->hwstate; |
| } |
| spin_unlock_irqrestore(&wport->lock, flags); |
| if (hwstate == HW_STOPPED) |
| break; |
| schedule(); |
| } |
| current->state = TASK_RUNNING; |
| remove_wait_queue(&wport->queue, &wait); |
| DBGPV("swstate = %d, hwstate = %d\n", wport->swstate, wport->hwstate); |
| DBGRV(); |
| } |
| |
| /*****************************************************************************/ |
| /* audio driver */ |
| |
| /* |
| * seek on an audio device always fails. |
| */ |
| |
| static void vwsnd_audio_read_intr(vwsnd_dev_t *devc, unsigned int status) |
| { |
| int overflown = status & LI_INTR_COMM1_OVERFLOW; |
| |
| if (status & READ_INTR_MASK) |
| pcm_input(devc, overflown, 0); |
| } |
| |
| static void vwsnd_audio_write_intr(vwsnd_dev_t *devc, unsigned int status) |
| { |
| int underflown = status & LI_INTR_COMM2_UNDERFLOW; |
| |
| if (status & WRITE_INTR_MASK) |
| pcm_output(devc, underflown, 0); |
| } |
| |
| static irqreturn_t vwsnd_audio_intr(int irq, void *dev_id) |
| { |
| vwsnd_dev_t *devc = dev_id; |
| unsigned int status; |
| |
| DBGEV("(irq=%d, dev_id=0x%p)\n", irq, dev_id); |
| |
| status = li_get_clear_intr_status(&devc->lith); |
| vwsnd_audio_read_intr(devc, status); |
| vwsnd_audio_write_intr(devc, status); |
| return IRQ_HANDLED; |
| } |
| |
| static ssize_t vwsnd_audio_do_read(struct file *file, |
| char *buffer, |
| size_t count, |
| loff_t *ppos) |
| { |
| vwsnd_dev_t *devc = file->private_data; |
| vwsnd_port_t *rport = ((file->f_mode & FMODE_READ) ? |
| &devc->rport : NULL); |
| int ret, nb; |
| |
| DBGEV("(file=0x%p, buffer=0x%p, count=%d, ppos=0x%p)\n", |
| file, buffer, count, ppos); |
| |
| if (!rport) |
| return -EINVAL; |
| |
| if (rport->swbuf == NULL) { |
| vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ? |
| &devc->wport : NULL; |
| ret = pcm_setup(devc, rport, wport); |
| if (ret < 0) |
| return ret; |
| } |
| |
| if (!access_ok(VERIFY_READ, buffer, count)) |
| return -EFAULT; |
| ret = 0; |
| while (count) { |
| DECLARE_WAITQUEUE(wait, current); |
| add_wait_queue(&rport->queue, &wait); |
| while ((nb = swb_inc_u(rport, 0)) == 0) { |
| DBGPV("blocking\n"); |
| set_current_state(TASK_INTERRUPTIBLE); |
| if (rport->flags & DISABLED || |
| file->f_flags & O_NONBLOCK) { |
| current->state = TASK_RUNNING; |
| remove_wait_queue(&rport->queue, &wait); |
| return ret ? ret : -EAGAIN; |
| } |
| schedule(); |
| if (signal_pending(current)) { |
| current->state = TASK_RUNNING; |
| remove_wait_queue(&rport->queue, &wait); |
| return ret ? ret : -ERESTARTSYS; |
| } |
| } |
| current->state = TASK_RUNNING; |
| remove_wait_queue(&rport->queue, &wait); |
| pcm_input(devc, 0, 0); |
| /* nb bytes are available in userbuf. */ |
| if (nb > count) |
| nb = count; |
| DBGPV("nb = %d\n", nb); |
| if (copy_to_user(buffer, rport->swbuf + rport->swb_u_idx, nb)) |
| return -EFAULT; |
| (void) swb_inc_u(rport, nb); |
| buffer += nb; |
| count -= nb; |
| ret += nb; |
| } |
| DBGPV("returning %d\n", ret); |
| return ret; |
| } |
| |
| static ssize_t vwsnd_audio_read(struct file *file, |
| char *buffer, |
| size_t count, |
| loff_t *ppos) |
| { |
| vwsnd_dev_t *devc = file->private_data; |
| ssize_t ret; |
| |
| mutex_lock(&devc->io_mutex); |
| ret = vwsnd_audio_do_read(file, buffer, count, ppos); |
| mutex_unlock(&devc->io_mutex); |
| return ret; |
| } |
| |
| static ssize_t vwsnd_audio_do_write(struct file *file, |
| const char *buffer, |
| size_t count, |
| loff_t *ppos) |
| { |
| vwsnd_dev_t *devc = file->private_data; |
| vwsnd_port_t *wport = ((file->f_mode & FMODE_WRITE) ? |
| &devc->wport : NULL); |
| int ret, nb; |
| |
| DBGEV("(file=0x%p, buffer=0x%p, count=%d, ppos=0x%p)\n", |
| file, buffer, count, ppos); |
| |
| if (!wport) |
| return -EINVAL; |
| |
| if (wport->swbuf == NULL) { |
| vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ? |
| &devc->rport : NULL; |
| ret = pcm_setup(devc, rport, wport); |
| if (ret < 0) |
| return ret; |
| } |
| if (!access_ok(VERIFY_WRITE, buffer, count)) |
| return -EFAULT; |
| ret = 0; |
| while (count) { |
| DECLARE_WAITQUEUE(wait, current); |
| add_wait_queue(&wport->queue, &wait); |
| while ((nb = swb_inc_u(wport, 0)) == 0) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| if (wport->flags & DISABLED || |
| file->f_flags & O_NONBLOCK) { |
| current->state = TASK_RUNNING; |
| remove_wait_queue(&wport->queue, &wait); |
| return ret ? ret : -EAGAIN; |
| } |
| schedule(); |
| if (signal_pending(current)) { |
| current->state = TASK_RUNNING; |
| remove_wait_queue(&wport->queue, &wait); |
| return ret ? ret : -ERESTARTSYS; |
| } |
| } |
| current->state = TASK_RUNNING; |
| remove_wait_queue(&wport->queue, &wait); |
| /* nb bytes are available in userbuf. */ |
| if (nb > count) |
| nb = count; |
| DBGPV("nb = %d\n", nb); |
| if (copy_from_user(wport->swbuf + wport->swb_u_idx, buffer, nb)) |
| return -EFAULT; |
| pcm_output(devc, 0, nb); |
| buffer += nb; |
| count -= nb; |
| ret += nb; |
| } |
| DBGPV("returning %d\n", ret); |
| return ret; |
| } |
| |
| static ssize_t vwsnd_audio_write(struct file *file, |
| const char *buffer, |
| size_t count, |
| loff_t *ppos) |
| { |
| vwsnd_dev_t *devc = file->private_data; |
| ssize_t ret; |
| |
| mutex_lock(&devc->io_mutex); |
| ret = vwsnd_audio_do_write(file, buffer, count, ppos); |
| mutex_unlock(&devc->io_mutex); |
| return ret; |
| } |
| |
| /* No kernel lock - fine */ |
| static unsigned int vwsnd_audio_poll(struct file *file, |
| struct poll_table_struct *wait) |
| { |
| vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; |
| vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ? |
| &devc->rport : NULL; |
| vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ? |
| &devc->wport : NULL; |
| unsigned int mask = 0; |
| |
| DBGEV("(file=0x%p, wait=0x%p)\n", file, wait); |
| |
| ASSERT(rport || wport); |
| if (rport) { |
| poll_wait(file, &rport->queue, wait); |
| if (swb_inc_u(rport, 0)) |
| mask |= (POLLIN | POLLRDNORM); |
| } |
| if (wport) { |
| poll_wait(file, &wport->queue, wait); |
| if (wport->swbuf == NULL || swb_inc_u(wport, 0)) |
| mask |= (POLLOUT | POLLWRNORM); |
| } |
| |
| DBGPV("returning 0x%x\n", mask); |
| return mask; |
| } |
| |
| static int vwsnd_audio_do_ioctl(struct file *file, |
| unsigned int cmd, |
| unsigned long arg) |
| { |
| vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; |
| vwsnd_port_t *rport = (file->f_mode & FMODE_READ) ? |
| &devc->rport : NULL; |
| vwsnd_port_t *wport = (file->f_mode & FMODE_WRITE) ? |
| &devc->wport : NULL; |
| vwsnd_port_t *aport = rport ? rport : wport; |
| struct audio_buf_info buf_info; |
| struct count_info info; |
| unsigned long flags; |
| int ival; |
| |
| |
| DBGEV("(file=0x%p, cmd=0x%x, arg=0x%lx)\n", |
| file, cmd, arg); |
| switch (cmd) { |
| case OSS_GETVERSION: /* _SIOR ('M', 118, int) */ |
| DBGX("OSS_GETVERSION\n"); |
| ival = SOUND_VERSION; |
| return put_user(ival, (int *) arg); |
| |
| case SNDCTL_DSP_GETCAPS: /* _SIOR ('P',15, int) */ |
| DBGX("SNDCTL_DSP_GETCAPS\n"); |
| ival = DSP_CAP_DUPLEX | DSP_CAP_REALTIME | DSP_CAP_TRIGGER; |
| return put_user(ival, (int *) arg); |
| |
| case SNDCTL_DSP_GETFMTS: /* _SIOR ('P',11, int) */ |
| DBGX("SNDCTL_DSP_GETFMTS\n"); |
| ival = (AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW | |
| AFMT_U8 | AFMT_S8); |
| return put_user(ival, (int *) arg); |
| break; |
| |
| case SOUND_PCM_READ_RATE: /* _SIOR ('P', 2, int) */ |
| DBGX("SOUND_PCM_READ_RATE\n"); |
| ival = aport->sw_framerate; |
| return put_user(ival, (int *) arg); |
| |
| case SOUND_PCM_READ_CHANNELS: /* _SIOR ('P', 6, int) */ |
| DBGX("SOUND_PCM_READ_CHANNELS\n"); |
| ival = aport->sw_channels; |
| return put_user(ival, (int *) arg); |
| |
| case SNDCTL_DSP_SPEED: /* _SIOWR('P', 2, int) */ |
| if (get_user(ival, (int *) arg)) |
| return -EFAULT; |
| DBGX("SNDCTL_DSP_SPEED %d\n", ival); |
| if (ival) { |
| if (aport->swstate != SW_INITIAL) { |
| DBGX("SNDCTL_DSP_SPEED failed: swstate = %d\n", |
| aport->swstate); |
| return -EINVAL; |
| } |
| if (ival < MIN_SPEED) |
| ival = MIN_SPEED; |
| if (ival > MAX_SPEED) |
| ival = MAX_SPEED; |
| if (rport) |
| rport->sw_framerate = ival; |
| if (wport) |
| wport->sw_framerate = ival; |
| } else |
| ival = aport->sw_framerate; |
| return put_user(ival, (int *) arg); |
| |
| case SNDCTL_DSP_STEREO: /* _SIOWR('P', 3, int) */ |
| if (get_user(ival, (int *) arg)) |
| return -EFAULT; |
| DBGX("SNDCTL_DSP_STEREO %d\n", ival); |
| if (ival != 0 && ival != 1) |
| return -EINVAL; |
| if (aport->swstate != SW_INITIAL) |
| return -EINVAL; |
| if (rport) |
| rport->sw_channels = ival + 1; |
| if (wport) |
| wport->sw_channels = ival + 1; |
| return put_user(ival, (int *) arg); |
| |
| case SNDCTL_DSP_CHANNELS: /* _SIOWR('P', 6, int) */ |
| if (get_user(ival, (int *) arg)) |
| return -EFAULT; |
| DBGX("SNDCTL_DSP_CHANNELS %d\n", ival); |
| if (ival != 1 && ival != 2) |
| return -EINVAL; |
| if (aport->swstate != SW_INITIAL) |
| return -EINVAL; |
| if (rport) |
| rport->sw_channels = ival; |
| if (wport) |
| wport->sw_channels = ival; |
| return put_user(ival, (int *) arg); |
| |
| case SNDCTL_DSP_GETBLKSIZE: /* _SIOWR('P', 4, int) */ |
| ival = pcm_setup(devc, rport, wport); |
| if (ival < 0) { |
| DBGX("SNDCTL_DSP_GETBLKSIZE failed, errno %d\n", ival); |
| return ival; |
| } |
| ival = 1 << aport->sw_fragshift; |
| DBGX("SNDCTL_DSP_GETBLKSIZE returning %d\n", ival); |
| return put_user(ival, (int *) arg); |
| |
| case SNDCTL_DSP_SETFRAGMENT: /* _SIOWR('P',10, int) */ |
| if (get_user(ival, (int *) arg)) |
| return -EFAULT; |
| DBGX("SNDCTL_DSP_SETFRAGMENT %d:%d\n", |
| ival >> 16, ival & 0xFFFF); |
| if (aport->swstate != SW_INITIAL) |
| return -EINVAL; |
| { |
| int sw_fragshift = ival & 0xFFFF; |
| int sw_subdivshift = aport->sw_subdivshift; |
| int hw_fragshift = sw_fragshift - sw_subdivshift; |
| int sw_fragcount = (ival >> 16) & 0xFFFF; |
| int hw_fragsize; |
| if (hw_fragshift < MIN_FRAGSHIFT) |
| hw_fragshift = MIN_FRAGSHIFT; |
| if (hw_fragshift > MAX_FRAGSHIFT) |
| hw_fragshift = MAX_FRAGSHIFT; |
| sw_fragshift = hw_fragshift + aport->sw_subdivshift; |
| hw_fragsize = 1 << hw_fragshift; |
| if (sw_fragcount < MIN_FRAGCOUNT(hw_fragsize)) |
| sw_fragcount = MIN_FRAGCOUNT(hw_fragsize); |
| if (sw_fragcount > MAX_FRAGCOUNT(hw_fragsize)) |
| sw_fragcount = MAX_FRAGCOUNT(hw_fragsize); |
| DBGPV("sw_fragshift = %d\n", sw_fragshift); |
| DBGPV("rport = 0x%p, wport = 0x%p\n", rport, wport); |
| if (rport) { |
| rport->sw_fragshift = sw_fragshift; |
| rport->sw_fragcount = sw_fragcount; |
| } |
| if (wport) { |
| wport->sw_fragshift = sw_fragshift; |
| wport->sw_fragcount = sw_fragcount; |
| } |
| ival = sw_fragcount << 16 | sw_fragshift; |
| } |
| DBGX("SNDCTL_DSP_SETFRAGMENT returns %d:%d\n", |
| ival >> 16, ival & 0xFFFF); |
| return put_user(ival, (int *) arg); |
| |
| case SNDCTL_DSP_SUBDIVIDE: /* _SIOWR('P', 9, int) */ |
| if (get_user(ival, (int *) arg)) |
| return -EFAULT; |
| DBGX("SNDCTL_DSP_SUBDIVIDE %d\n", ival); |
| if (aport->swstate != SW_INITIAL) |
| return -EINVAL; |
| { |
| int subdivshift; |
| int hw_fragshift, hw_fragsize, hw_fragcount; |
| switch (ival) { |
| case 1: subdivshift = 0; break; |
| case 2: subdivshift = 1; break; |
| case 4: subdivshift = 2; break; |
| default: return -EINVAL; |
| } |
| hw_fragshift = aport->sw_fragshift - subdivshift; |
| if (hw_fragshift < MIN_FRAGSHIFT || |
| hw_fragshift > MAX_FRAGSHIFT) |
| return -EINVAL; |
| hw_fragsize = 1 << hw_fragshift; |
| hw_fragcount = aport->sw_fragcount >> subdivshift; |
| if (hw_fragcount < MIN_FRAGCOUNT(hw_fragsize) || |
| hw_fragcount > MAX_FRAGCOUNT(hw_fragsize)) |
| return -EINVAL; |
| if (rport) |
| rport->sw_subdivshift = subdivshift; |
| if (wport) |
| wport->sw_subdivshift = subdivshift; |
| } |
| return 0; |
| |
| case SNDCTL_DSP_SETFMT: /* _SIOWR('P',5, int) */ |
| if (get_user(ival, (int *) arg)) |
| return -EFAULT; |
| DBGX("SNDCTL_DSP_SETFMT %d\n", ival); |
| if (ival != AFMT_QUERY) { |
| if (aport->swstate != SW_INITIAL) { |
| DBGP("SETFMT failed, swstate = %d\n", |
| aport->swstate); |
| return -EINVAL; |
| } |
| switch (ival) { |
| case AFMT_MU_LAW: |
| case AFMT_A_LAW: |
| case AFMT_U8: |
| case AFMT_S8: |
| case AFMT_S16_LE: |
| if (rport) |
| rport->sw_samplefmt = ival; |
| if (wport) |
| wport->sw_samplefmt = ival; |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| ival = aport->sw_samplefmt; |
| return put_user(ival, (int *) arg); |
| |
| case SNDCTL_DSP_GETOSPACE: /* _SIOR ('P',12, audio_buf_info) */ |
| DBGXV("SNDCTL_DSP_GETOSPACE\n"); |
| if (!wport) |
| return -EINVAL; |
| ival = pcm_setup(devc, rport, wport); |
| if (ival < 0) |
| return ival; |
| ival = swb_inc_u(wport, 0); |
| buf_info.fragments = ival >> wport->sw_fragshift; |
| buf_info.fragstotal = wport->sw_fragcount; |
| buf_info.fragsize = 1 << wport->sw_fragshift; |
| buf_info.bytes = ival; |
| DBGXV("SNDCTL_DSP_GETOSPACE returns { %d %d %d %d }\n", |
| buf_info.fragments, buf_info.fragstotal, |
| buf_info.fragsize, buf_info.bytes); |
| if (copy_to_user((void *) arg, &buf_info, sizeof buf_info)) |
| return -EFAULT; |
| return 0; |
| |
| case SNDCTL_DSP_GETISPACE: /* _SIOR ('P',13, audio_buf_info) */ |
| DBGX("SNDCTL_DSP_GETISPACE\n"); |
| if (!rport) |
| return -EINVAL; |
| ival = pcm_setup(devc, rport, wport); |
| if (ival < 0) |
| return ival; |
| ival = swb_inc_u(rport, 0); |
| buf_info.fragments = ival >> rport->sw_fragshift; |
| buf_info.fragstotal = rport->sw_fragcount; |
| buf_info.fragsize = 1 << rport->sw_fragshift; |
| buf_info.bytes = ival; |
| DBGX("SNDCTL_DSP_GETISPACE returns { %d %d %d %d }\n", |
| buf_info.fragments, buf_info.fragstotal, |
| buf_info.fragsize, buf_info.bytes); |
| if (copy_to_user((void *) arg, &buf_info, sizeof buf_info)) |
| return -EFAULT; |
| return 0; |
| |
| case SNDCTL_DSP_NONBLOCK: /* _SIO ('P',14) */ |
| DBGX("SNDCTL_DSP_NONBLOCK\n"); |
| spin_lock(&file->f_lock); |
| file->f_flags |= O_NONBLOCK; |
| spin_unlock(&file->f_lock); |
| return 0; |
| |
| case SNDCTL_DSP_RESET: /* _SIO ('P', 0) */ |
| DBGX("SNDCTL_DSP_RESET\n"); |
| /* |
| * Nothing special needs to be done for input. Input |
| * samples sit in swbuf, but it will be reinitialized |
| * to empty when pcm_setup() is called. |
| */ |
| if (wport && wport->swbuf) { |
| wport->swstate = SW_INITIAL; |
| pcm_output(devc, 0, 0); |
| pcm_write_sync(devc); |
| } |
| pcm_shutdown(devc, rport, wport); |
| return 0; |
| |
| case SNDCTL_DSP_SYNC: /* _SIO ('P', 1) */ |
| DBGX("SNDCTL_DSP_SYNC\n"); |
| if (wport) { |
| pcm_flush_frag(devc); |
| pcm_write_sync(devc); |
| } |
| pcm_shutdown(devc, rport, wport); |
| return 0; |
| |
| case SNDCTL_DSP_POST: /* _SIO ('P', 8) */ |
| DBGX("SNDCTL_DSP_POST\n"); |
| if (!wport) |
| return -EINVAL; |
| pcm_flush_frag(devc); |
| return 0; |
| |
| case SNDCTL_DSP_GETIPTR: /* _SIOR ('P', 17, count_info) */ |
| DBGX("SNDCTL_DSP_GETIPTR\n"); |
| if (!rport) |
| return -EINVAL; |
| spin_lock_irqsave(&rport->lock, flags); |
| { |
| ustmsc_t ustmsc; |
| if (rport->hwstate == HW_RUNNING) { |
| ASSERT(rport->swstate == SW_RUN); |
| li_read_USTMSC(&rport->chan, &ustmsc); |
| info.bytes = ustmsc.msc - rport->MSC_offset; |
| info.bytes *= rport->frame_size; |
| } else { |
| info.bytes = rport->byte_count; |
| } |
| info.blocks = rport->frag_count; |
| info.ptr = 0; /* not implemented */ |
| rport->frag_count = 0; |
| } |
| spin_unlock_irqrestore(&rport->lock, flags); |
| if (copy_to_user((void *) arg, &info, sizeof info)) |
| return -EFAULT; |
| return 0; |
| |
| case SNDCTL_DSP_GETOPTR: /* _SIOR ('P',18, count_info) */ |
| DBGX("SNDCTL_DSP_GETOPTR\n"); |
| if (!wport) |
| return -EINVAL; |
| spin_lock_irqsave(&wport->lock, flags); |
| { |
| ustmsc_t ustmsc; |
| if (wport->hwstate == HW_RUNNING) { |
| ASSERT(wport->swstate == SW_RUN); |
| li_read_USTMSC(&wport->chan, &ustmsc); |
| info.bytes = ustmsc.msc - wport->MSC_offset; |
| info.bytes *= wport->frame_size; |
| } else { |
| info.bytes = wport->byte_count; |
| } |
| info.blocks = wport->frag_count; |
| info.ptr = 0; /* not implemented */ |
| wport->frag_count = 0; |
| } |
| spin_unlock_irqrestore(&wport->lock, flags); |
| if (copy_to_user((void *) arg, &info, sizeof info)) |
| return -EFAULT; |
| return 0; |
| |
| case SNDCTL_DSP_GETODELAY: /* _SIOR ('P', 23, int) */ |
| DBGX("SNDCTL_DSP_GETODELAY\n"); |
| if (!wport) |
| return -EINVAL; |
| spin_lock_irqsave(&wport->lock, flags); |
| { |
| int fsize = wport->frame_size; |
| ival = wport->swb_i_avail / fsize; |
| if (wport->hwstate == HW_RUNNING) { |
| int swptr, hwptr, hwframes, hwbytes, hwsize; |
| int totalhwbytes; |
| ustmsc_t ustmsc; |
| |
| hwsize = wport->hwbuf_size; |
| swptr = li_read_swptr(&wport->chan); |
| li_read_USTMSC(&wport->chan, &ustmsc); |
| hwframes = ustmsc.msc - wport->MSC_offset; |
| totalhwbytes = hwframes * fsize; |
| hwptr = totalhwbytes % hwsize; |
| hwbytes = (swptr - hwptr + hwsize) % hwsize; |
| ival += hwbytes / fsize; |
| } |
| } |
| spin_unlock_irqrestore(&wport->lock, flags); |
| return put_user(ival, (int *) arg); |
| |
| case SNDCTL_DSP_PROFILE: /* _SIOW ('P', 23, int) */ |
| DBGX("SNDCTL_DSP_PROFILE\n"); |
| |
| /* |
| * Thomas Sailer explains SNDCTL_DSP_PROFILE |
| * (private email, March 24, 1999): |
| * |
| * This gives the sound driver a hint on what it |
| * should do with partial fragments |
| * (i.e. fragments partially filled with write). |
| * This can direct the driver to zero them or |
| * leave them alone. But don't ask me what this |
| * is good for, my driver just zeroes the last |
| * fragment before the receiver stops, no idea |
| * what good for any other behaviour could |
| * be. Implementing it as NOP seems safe. |
| */ |
| |
| break; |
| |
| case SNDCTL_DSP_GETTRIGGER: /* _SIOR ('P',16, int) */ |
| DBGX("SNDCTL_DSP_GETTRIGGER\n"); |
| ival = 0; |
| if (rport) { |
| spin_lock_irqsave(&rport->lock, flags); |
| { |
| if (!(rport->flags & DISABLED)) |
| ival |= PCM_ENABLE_INPUT; |
| } |
| spin_unlock_irqrestore(&rport->lock, flags); |
| } |
| if (wport) { |
| spin_lock_irqsave(&wport->lock, flags); |
| { |
| if (!(wport->flags & DISABLED)) |
| ival |= PCM_ENABLE_OUTPUT; |
| } |
| spin_unlock_irqrestore(&wport->lock, flags); |
| } |
| return put_user(ival, (int *) arg); |
| |
| case SNDCTL_DSP_SETTRIGGER: /* _SIOW ('P',16, int) */ |
| if (get_user(ival, (int *) arg)) |
| return -EFAULT; |
| DBGX("SNDCTL_DSP_SETTRIGGER %d\n", ival); |
| |
| /* |
| * If user is disabling I/O and port is not in initial |
| * state, fail with EINVAL. |
| */ |
| |
| if (((rport && !(ival & PCM_ENABLE_INPUT)) || |
| (wport && !(ival & PCM_ENABLE_OUTPUT))) && |
| aport->swstate != SW_INITIAL) |
| return -EINVAL; |
| |
| if (rport) { |
| vwsnd_port_hwstate_t hwstate; |
| spin_lock_irqsave(&rport->lock, flags); |
| { |
| hwstate = rport->hwstate; |
| if (ival & PCM_ENABLE_INPUT) |
| rport->flags &= ~DISABLED; |
| else |
| rport->flags |= DISABLED; |
| } |
| spin_unlock_irqrestore(&rport->lock, flags); |
| if (hwstate != HW_RUNNING && ival & PCM_ENABLE_INPUT) { |
| |
| if (rport->swstate == SW_INITIAL) |
| pcm_setup(devc, rport, wport); |
| else |
| li_activate_dma(&rport->chan); |
| } |
| } |
| if (wport) { |
| vwsnd_port_flags_t pflags; |
| spin_lock_irqsave(&wport->lock, flags); |
| { |
| pflags = wport->flags; |
| if (ival & PCM_ENABLE_OUTPUT) |
| wport->flags &= ~DISABLED; |
| else |
| wport->flags |= DISABLED; |
| } |
| spin_unlock_irqrestore(&wport->lock, flags); |
| if (pflags & DISABLED && ival & PCM_ENABLE_OUTPUT) { |
| if (wport->swstate == SW_RUN) |
| pcm_output(devc, 0, 0); |
| } |
| } |
| return 0; |
| |
| default: |
| DBGP("unknown ioctl 0x%x\n", cmd); |
| return -EINVAL; |
| } |
| DBGP("unimplemented ioctl 0x%x\n", cmd); |
| return -EINVAL; |
| } |
| |
| static long vwsnd_audio_ioctl(struct file *file, |
| unsigned int cmd, |
| unsigned long arg) |
| { |
| vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; |
| int ret; |
| |
| mutex_lock(&vwsnd_mutex); |
| mutex_lock(&devc->io_mutex); |
| ret = vwsnd_audio_do_ioctl(file, cmd, arg); |
| mutex_unlock(&devc->io_mutex); |
| mutex_unlock(&vwsnd_mutex); |
| |
| return ret; |
| } |
| |
| /* No mmap. */ |
| |
| static int vwsnd_audio_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| DBGE("(file=0x%p, vma=0x%p)\n", file, vma); |
| return -ENODEV; |
| } |
| |
| /* |
| * Open the audio device for read and/or write. |
| * |
| * Returns 0 on success, -errno on failure. |
| */ |
| |
| static int vwsnd_audio_open(struct inode *inode, struct file *file) |
| { |
| vwsnd_dev_t *devc; |
| int minor = iminor(inode); |
| int sw_samplefmt; |
| |
| DBGE("(inode=0x%p, file=0x%p)\n", inode, file); |
| |
| mutex_lock(&vwsnd_mutex); |
| INC_USE_COUNT; |
| for (devc = vwsnd_dev_list; devc; devc = devc->next_dev) |
| if ((devc->audio_minor & ~0x0F) == (minor & ~0x0F)) |
| break; |
| |
| if (devc == NULL) { |
| DEC_USE_COUNT; |
| mutex_unlock(&vwsnd_mutex); |
| return -ENODEV; |
| } |
| |
| mutex_lock(&devc->open_mutex); |
| while (devc->open_mode & file->f_mode) { |
| mutex_unlock(&devc->open_mutex); |
| if (file->f_flags & O_NONBLOCK) { |
| DEC_USE_COUNT; |
| mutex_unlock(&vwsnd_mutex); |
| return -EBUSY; |
| } |
| interruptible_sleep_on(&devc->open_wait); |
| if (signal_pending(current)) { |
| DEC_USE_COUNT; |
| mutex_unlock(&vwsnd_mutex); |
| return -ERESTARTSYS; |
| } |
| mutex_lock(&devc->open_mutex); |
| } |
| devc->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE); |
| mutex_unlock(&devc->open_mutex); |
| |
| /* get default sample format from minor number. */ |
| |
| sw_samplefmt = 0; |
| if ((minor & 0xF) == SND_DEV_DSP) |
| sw_samplefmt = AFMT_U8; |
| else if ((minor & 0xF) == SND_DEV_AUDIO) |
| sw_samplefmt = AFMT_MU_LAW; |
| else if ((minor & 0xF) == SND_DEV_DSP16) |
| sw_samplefmt = AFMT_S16_LE; |
| else |
| ASSERT(0); |
| |
| /* Initialize vwsnd_ports. */ |
| |
| mutex_lock(&devc->io_mutex); |
| { |
| if (file->f_mode & FMODE_READ) { |
| devc->rport.swstate = SW_INITIAL; |
| devc->rport.flags = 0; |
| devc->rport.sw_channels = 1; |
| devc->rport.sw_samplefmt = sw_samplefmt; |
| devc->rport.sw_framerate = 8000; |
| devc->rport.sw_fragshift = DEFAULT_FRAGSHIFT; |
| devc->rport.sw_fragcount = DEFAULT_FRAGCOUNT; |
| devc->rport.sw_subdivshift = DEFAULT_SUBDIVSHIFT; |
| devc->rport.byte_count = 0; |
| devc->rport.frag_count = 0; |
| } |
| if (file->f_mode & FMODE_WRITE) { |
| devc->wport.swstate = SW_INITIAL; |
| devc->wport.flags = 0; |
| devc->wport.sw_channels = 1; |
| devc->wport.sw_samplefmt = sw_samplefmt; |
| devc->wport.sw_framerate = 8000; |
| devc->wport.sw_fragshift = DEFAULT_FRAGSHIFT; |
| devc->wport.sw_fragcount = DEFAULT_FRAGCOUNT; |
| devc->wport.sw_subdivshift = DEFAULT_SUBDIVSHIFT; |
| devc->wport.byte_count = 0; |
| devc->wport.frag_count = 0; |
| } |
| } |
| mutex_unlock(&devc->io_mutex); |
| |
| file->private_data = devc; |
| DBGRV(); |
| mutex_unlock(&vwsnd_mutex); |
| return 0; |
| } |
| |
| /* |
| * Release (close) the audio device. |
| */ |
| |
| static int vwsnd_audio_release(struct inode *inode, struct file *file) |
| { |
| vwsnd_dev_t *devc = (vwsnd_dev_t *) file->private_data; |
| vwsnd_port_t *wport = NULL, *rport = NULL; |
| int err = 0; |
| |
| mutex_lock(&vwsnd_mutex); |
| mutex_lock(&devc->io_mutex); |
| { |
| DBGEV("(inode=0x%p, file=0x%p)\n", inode, file); |
| |
| if (file->f_mode & FMODE_READ) |
| |