# SPDX-License-Identifier: GPL-2.0

# Finds the multi-part object the current object will be linked into.
# If the object belongs to two or more multi-part objects, list them all.
modname-multi = $(sort $(foreach m,$(multi-obj-ym),\
		$(if $(filter $*.o, $(call suffix-search, $m, .o, -objs -y -m)),$(m:.o=))))

__modname = $(or $(modname-multi),$(basetarget))

modname = $(subst $(space),:,$(__modname))
modfile = $(addprefix $(obj)/,$(__modname))

# target with $(obj)/ and its suffix stripped
target-stem = $(basename $(patsubst $(obj)/%,%,$@))

# These flags are needed for modversions and compiling, so we define them here
# $(modname_flags) defines KBUILD_MODNAME as the name of the module it will
# end up in (or would, if it gets compiled in)
name-fix-token = $(subst $(comma),_,$(subst -,_,$1))
name-fix = $(call stringify,$(call name-fix-token,$1))
basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
modname_flags  = -DKBUILD_MODNAME=$(call name-fix,$(modname)) \
		 -D__KBUILD_MODNAME=$(call name-fix-token,$(modname))
modfile_flags  = -DKBUILD_MODFILE=$(call stringify,$(modfile))

_c_flags       = $(filter-out $(CFLAGS_REMOVE_$(target-stem).o), \
                     $(filter-out $(ccflags-remove-y), \
                         $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(ccflags-y)) \
                     $(CFLAGS_$(target-stem).o))
_rust_flags    = $(filter-out $(RUSTFLAGS_REMOVE_$(target-stem).o), \
                     $(filter-out $(rustflags-remove-y), \
                         $(KBUILD_RUSTFLAGS) $(rustflags-y)) \
                     $(RUSTFLAGS_$(target-stem).o))
_a_flags       = $(filter-out $(AFLAGS_REMOVE_$(target-stem).o), \
                     $(filter-out $(asflags-remove-y), \
                         $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(asflags-y)) \
                     $(AFLAGS_$(target-stem).o))
_cpp_flags     = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(target-stem).lds)

#
# Enable gcov profiling flags for a file, directory or for all files depending
# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
# (in this order)
#
ifeq ($(CONFIG_GCOV_KERNEL),y)
_c_flags += $(if $(patsubst n%,, \
		$(GCOV_PROFILE_$(target-stem).o)$(GCOV_PROFILE)$(if $(is-kernel-object),$(CONFIG_GCOV_PROFILE_ALL))), \
		$(CFLAGS_GCOV))
endif

#
# Enable address sanitizer flags for kernel except some files or directories
# we don't want to check (depends on variables KASAN_SANITIZE_obj.o, KASAN_SANITIZE)
#
ifeq ($(CONFIG_KASAN),y)
ifneq ($(CONFIG_KASAN_HW_TAGS),y)
_c_flags += $(if $(patsubst n%,, \
		$(KASAN_SANITIZE_$(target-stem).o)$(KASAN_SANITIZE)$(is-kernel-object)), \
		$(CFLAGS_KASAN), $(CFLAGS_KASAN_NOSANITIZE))
_rust_flags += $(if $(patsubst n%,, \
		$(KASAN_SANITIZE_$(target-stem).o)$(KASAN_SANITIZE)$(is-kernel-object)), \
		$(RUSTFLAGS_KASAN))
endif
endif

ifeq ($(CONFIG_KMSAN),y)
_c_flags += $(if $(patsubst n%,, \
		$(KMSAN_SANITIZE_$(target-stem).o)$(KMSAN_SANITIZE)$(is-kernel-object)), \
		$(CFLAGS_KMSAN))
_c_flags += $(if $(patsubst n%,, \
		$(KMSAN_ENABLE_CHECKS_$(target-stem).o)$(KMSAN_ENABLE_CHECKS)$(is-kernel-object)), \
		, -mllvm -msan-disable-checks=1)
endif

ifeq ($(CONFIG_UBSAN),y)
_c_flags += $(if $(patsubst n%,, \
		$(UBSAN_SANITIZE_$(target-stem).o)$(UBSAN_SANITIZE)$(is-kernel-object)), \
		$(CFLAGS_UBSAN))
_c_flags += $(if $(patsubst n%,, \
		$(UBSAN_INTEGER_WRAP_$(target-stem).o)$(UBSAN_SANITIZE_$(target-stem).o)$(UBSAN_INTEGER_WRAP)$(UBSAN_SANITIZE)$(is-kernel-object)), \
		$(CFLAGS_UBSAN_INTEGER_WRAP))
endif

ifeq ($(CONFIG_KCOV),y)
_c_flags += $(if $(patsubst n%,, \
	$(KCOV_INSTRUMENT_$(target-stem).o)$(KCOV_INSTRUMENT)$(if $(is-kernel-object),$(CONFIG_KCOV_INSTRUMENT_ALL))), \
	$(CFLAGS_KCOV))
_rust_flags += $(if $(patsubst n%,, \
	$(KCOV_INSTRUMENT_$(target-stem).o)$(KCOV_INSTRUMENT)$(if $(is-kernel-object),$(CONFIG_KCOV_INSTRUMENT_ALL))), \
	$(RUSTFLAGS_KCOV))
endif

#
# Enable KCSAN flags except some files or directories we don't want to check
# (depends on variables KCSAN_SANITIZE_obj.o, KCSAN_SANITIZE)
#
ifeq ($(CONFIG_KCSAN),y)
_c_flags += $(if $(patsubst n%,, \
	$(KCSAN_SANITIZE_$(target-stem).o)$(KCSAN_SANITIZE)$(is-kernel-object)), \
	$(CFLAGS_KCSAN))
# Some uninstrumented files provide implied barriers required to avoid false
# positives: set KCSAN_INSTRUMENT_BARRIERS for barrier instrumentation only.
_c_flags += $(if $(patsubst n%,, \
	$(KCSAN_INSTRUMENT_BARRIERS_$(target-stem).o)$(KCSAN_INSTRUMENT_BARRIERS)n), \
	-D__KCSAN_INSTRUMENT_BARRIERS__)
endif

#
# Enable AutoFDO build flags except some files or directories we don't want to
# enable (depends on variables AUTOFDO_PROFILE_obj.o and AUTOFDO_PROFILE).
#
ifeq ($(CONFIG_AUTOFDO_CLANG),y)
_c_flags += $(if $(patsubst n%,, \
	$(AUTOFDO_PROFILE_$(target-stem).o)$(AUTOFDO_PROFILE)$(is-kernel-object)), \
	$(CFLAGS_AUTOFDO_CLANG))
endif

#
# Enable Propeller build flags except some files or directories we don't want to
# enable (depends on variables AUTOFDO_PROPELLER_obj.o and PROPELLER_PROFILE).
#
ifdef CONFIG_PROPELLER_CLANG
_c_flags += $(if $(patsubst n%,, \
	$(AUTOFDO_PROFILE_$(target-stem).o)$(AUTOFDO_PROFILE)$(PROPELLER_PROFILE))$(is-kernel-object), \
	$(CFLAGS_PROPELLER_CLANG))
endif

# $(src) for including checkin headers from generated source files
# $(obj) for including generated headers from checkin source files
ifdef building_out_of_srctree
_c_flags   += $(addprefix -I, $(src) $(obj))
_a_flags   += $(addprefix -I, $(src) $(obj))
_cpp_flags += $(addprefix -I, $(src) $(obj))
endif

# If $(is-kernel-object) is 'y', this object will be linked to vmlinux or modules
is-kernel-object = $(or $(part-of-builtin),$(part-of-module))

part-of-builtin = $(if $(filter $(basename $@).o, $(real-obj-y) $(lib-y)),y)
part-of-module = $(if $(filter $(basename $@).o, $(real-obj-m)),y)
quiet_modtag = $(if $(part-of-module),[M],   )

modkern_cflags =                                          \
	$(if $(part-of-module),                           \
		$(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
		$(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL) $(modfile_flags))

modkern_rustflags =                                              \
	$(if $(part-of-module),                                   \
		$(KBUILD_RUSTFLAGS_MODULE) $(RUSTFLAGS_MODULE), \
		$(KBUILD_RUSTFLAGS_KERNEL) $(RUSTFLAGS_KERNEL))

modkern_aflags = $(if $(part-of-module),				\
			$(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE),	\
			$(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL) $(modfile_flags))

c_flags        = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
		 -include $(srctree)/include/linux/compiler_types.h       \
		 $(_c_flags) $(modkern_cflags)                           \
		 $(basename_flags) $(modname_flags)

rust_flags     = $(_rust_flags) $(modkern_rustflags) @$(objtree)/include/generated/rustc_cfg

a_flags        = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
		 $(_a_flags) $(modkern_aflags) $(modname_flags)

cpp_flags      = -Wp,-MMD,$(depfile) $(NOSTDINC_FLAGS) $(LINUXINCLUDE)     \
		 $(_cpp_flags)

ld_flags       = $(KBUILD_LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F))

ifdef CONFIG_OBJTOOL

objtool := $(objtree)/tools/objtool/objtool

objtool-args-$(CONFIG_HAVE_JUMP_LABEL_HACK)		+= --hacks=jump_label
objtool-args-$(CONFIG_HAVE_NOINSTR_HACK)		+= --hacks=noinstr
objtool-args-$(CONFIG_MITIGATION_CALL_DEPTH_TRACKING)	+= --hacks=skylake
objtool-args-$(CONFIG_X86_KERNEL_IBT)			+= --ibt
objtool-args-$(CONFIG_FINEIBT)				+= --cfi
objtool-args-$(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL)	+= --mcount
ifdef CONFIG_FTRACE_MCOUNT_USE_OBJTOOL
objtool-args-$(CONFIG_HAVE_OBJTOOL_NOP_MCOUNT)		+= --mnop
endif
objtool-args-$(CONFIG_UNWINDER_ORC)			+= --orc
objtool-args-$(CONFIG_MITIGATION_RETPOLINE)		+= --retpoline
objtool-args-$(CONFIG_MITIGATION_RETHUNK)		+= --rethunk
objtool-args-$(CONFIG_MITIGATION_SLS)			+= --sls
objtool-args-$(CONFIG_STACK_VALIDATION)			+= --stackval
objtool-args-$(CONFIG_HAVE_STATIC_CALL_INLINE)		+= --static-call
objtool-args-$(CONFIG_HAVE_UACCESS_VALIDATION)		+= --uaccess
objtool-args-$(or $(CONFIG_GCOV_KERNEL),$(CONFIG_KCOV))	+= --no-unreachable
objtool-args-$(CONFIG_PREFIX_SYMBOLS)			+= --prefix=$(CONFIG_FUNCTION_PADDING_BYTES)
objtool-args-$(CONFIG_OBJTOOL_WERROR)			+= --werror

objtool-args = $(objtool-args-y)					\
	$(if $(delay-objtool), --link)					\
	$(if $(part-of-module), --module)

delay-objtool := $(or $(CONFIG_LTO_CLANG),$(CONFIG_X86_KERNEL_IBT),$(CONFIG_KLP_BUILD))

cmd_objtool = $(if $(objtool-enabled), ; $(objtool) $(objtool-args) $@)
cmd_gen_objtooldep = $(if $(objtool-enabled), { echo ; echo '$@: $$(wildcard $(objtool))' ; } >> $(dot-target).cmd)

objtool-enabled := y

endif # CONFIG_OBJTOOL

# Useful for describing the dependency of composite objects
# Usage:
#   $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
define multi_depend
$(foreach m, $1, \
	$(eval $m: \
	$(addprefix $(obj)/, $(call suffix-search, $(patsubst $(obj)/%,%,$m), $2, $3))))
endef

# Remove ".." and "." from a path, without using "realpath"
# Usage:
#   $(call normalize_path,path/to/../file)
define normalize_path
$(strip $(eval elements :=) \
$(foreach elem,$(subst /, ,$1), \
	$(if $(filter-out .,$(elem)), \
	     $(if $(filter ..,$(elem)), \
		  $(eval elements := $(wordlist 2,$(words $(elements)),x $(elements))), \
		  $(eval elements := $(elements) $(elem))))) \
$(subst $(space),/,$(elements)))
endef

# Build commands
# ===========================================================================
# These are shared by some Makefile.* files.

ifdef CONFIG_LTO_CLANG
# Run $(LD) here to convert LLVM IR to ELF in the following cases:
#  - when this object needs objtool processing, as objtool cannot process LLVM IR
#  - when this is a single-object module, as modpost cannot process LLVM IR
cmd_ld_single = $(if $(objtool-enabled)$(is-single-obj-m), ; $(LD) $(ld_flags) -r -o $(tmp-target) $@; mv $(tmp-target) $@)
endif

quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@
      cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< \
		$(cmd_ld_single) \
		$(cmd_objtool)

define rule_cc_o_c
	$(call cmd_and_fixdep,cc_o_c)
	$(call cmd,checksrc)
	$(call cmd,checkdoc)
	$(call cmd,gen_objtooldep)
	$(call cmd,gen_symversions_c)
	$(call cmd,record_mcount)
	$(call cmd,warn_shared_object)
endef

quiet_cmd_as_o_S = AS $(quiet_modtag)  $@
      cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< $(cmd_objtool)

define rule_as_o_S
	$(call cmd_and_fixdep,as_o_S)
	$(call cmd,gen_objtooldep)
	$(call cmd,gen_symversions_S)
	$(call cmd,warn_shared_object)
endef

# Copy a file
# ===========================================================================
# 'cp' preserves permissions. If you use it to copy a file in read-only srctree,
# the copy would be read-only as well, leading to an error when executing the
# rule next time. Use 'cat' instead in order to generate a writable file.
quiet_cmd_copy = COPY    $@
      cmd_copy = cat $< > $@

$(obj)/%: $(src)/%_shipped
	$(call cmd,copy)

# Touch a file
# ===========================================================================
quiet_cmd_touch = TOUCH   $(call normalize_path,$@)
      cmd_touch = touch $@

# Commands useful for building a boot image
# ===========================================================================
#
#	Use as following:
#
#	target: source(s) FORCE
#		$(if_changed,ld/objcopy/gzip)
#
#	and add target to 'targets' so that we know we have to
#	read in the saved command line

# Linking
# ---------------------------------------------------------------------------

quiet_cmd_ld = LD      $@
      cmd_ld = $(LD) $(ld_flags) $(real-prereqs) -o $@

# Archive
# ---------------------------------------------------------------------------

quiet_cmd_ar = AR      $@
      cmd_ar = rm -f $@; $(AR) cDPrsT $@ $(real-prereqs)

# Objcopy
# ---------------------------------------------------------------------------

quiet_cmd_objcopy = OBJCOPY $@
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@

# Gzip
# ---------------------------------------------------------------------------

quiet_cmd_gzip = GZIP    $@
      cmd_gzip = cat $(real-prereqs) | $(KGZIP) -n -f -9 > $@

# Bzip2
# ---------------------------------------------------------------------------

# Bzip2 and LZMA do not include size in file... so we have to fake that;
# append the size as a 32-bit littleendian number as gzip does.
size_append = printf $(shell						\
dec_size=0;								\
for F in $(real-prereqs); do					\
	fsize=$$($(CONFIG_SHELL) $(srctree)/scripts/file-size.sh $$F);	\
	dec_size=$$(expr $$dec_size + $$fsize);				\
done;									\
printf "%08x\n" $$dec_size |						\
	sed 's/\(..\)/\1 /g' | {					\
		read ch0 ch1 ch2 ch3;					\
		for ch in $$ch3 $$ch2 $$ch1 $$ch0; do			\
			printf '%s%03o' '\\' $$((0x$$ch)); 		\
		done;							\
	}								\
)

quiet_cmd_file_size = GEN     $@
      cmd_file_size = $(size_append) > $@

quiet_cmd_bzip2 = BZIP2   $@
      cmd_bzip2 = cat $(real-prereqs) | $(KBZIP2) -9 > $@

quiet_cmd_bzip2_with_size = BZIP2   $@
      cmd_bzip2_with_size = { cat $(real-prereqs) | $(KBZIP2) -9; $(size_append); } > $@

# Lzma
# ---------------------------------------------------------------------------

quiet_cmd_lzma = LZMA    $@
      cmd_lzma = cat $(real-prereqs) | $(LZMA) -9 > $@

quiet_cmd_lzma_with_size = LZMA    $@
      cmd_lzma_with_size = { cat $(real-prereqs) | $(LZMA) -9; $(size_append); } > $@

quiet_cmd_lzo = LZO     $@
      cmd_lzo = cat $(real-prereqs) | $(KLZOP) -9 > $@

quiet_cmd_lzo_with_size = LZO     $@
      cmd_lzo_with_size = { cat $(real-prereqs) | $(KLZOP) -9; $(size_append); } > $@

quiet_cmd_lz4 = LZ4     $@
      cmd_lz4 = cat $(real-prereqs) | $(LZ4) -l -9 - - > $@

quiet_cmd_lz4_with_size = LZ4     $@
      cmd_lz4_with_size = { cat $(real-prereqs) | $(LZ4) -l -9 - -; \
                  $(size_append); } > $@

# U-Boot mkimage
# ---------------------------------------------------------------------------

MKIMAGE := $(srctree)/scripts/mkuboot.sh

# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
# the number of overrides in arch makefiles
UIMAGE_ARCH ?= $(SRCARCH)
UIMAGE_COMPRESSION ?= $(or $(2),none)
UIMAGE_OPTS-y ?=
UIMAGE_TYPE ?= kernel
UIMAGE_LOADADDR ?= arch_must_set_this
UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
UIMAGE_NAME ?= Linux-$(KERNELRELEASE)

quiet_cmd_uimage = UIMAGE  $@
      cmd_uimage = $(BASH) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
			-C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
			-T $(UIMAGE_TYPE) \
			-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
			-n '$(UIMAGE_NAME)' -d $< $@

# Flat Image Tree (FIT)
# This allows for packaging of a kernel and all devicetrees files, using
# compression.
# ---------------------------------------------------------------------------

MAKE_FIT := $(srctree)/scripts/make_fit.py

# Use this to override the compression algorithm
FIT_COMPRESSION ?= gzip

quiet_cmd_fit = FIT     $@
      cmd_fit = $(MAKE_FIT) -o $@ --arch $(UIMAGE_ARCH) --os linux \
		--name '$(UIMAGE_NAME)' \
		$(if $(findstring 1,$(KBUILD_VERBOSE)),-v) \
		$(if $(FIT_DECOMPOSE_DTBS),--decompose-dtbs) \
		--compress $(FIT_COMPRESSION) -k $< @$(word 2,$^)

# XZ
# ---------------------------------------------------------------------------
# Use xzkern or xzkern_with_size to compress the kernel image and xzmisc to
# compress other things.
#
# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
# of the kernel decompressor. A BCJ filter is used if it is available for
# the target architecture.
#
# xzkern_with_size also appends uncompressed size of the data using
# size_append. The .xz format has the size information available at the end
# of the file too, but it's in more complex format and it's good to avoid
# changing the part of the boot code that reads the uncompressed size.
# Note that the bytes added by size_append will make the xz tool think that
# the file is corrupt. This is expected.
#
# xzmisc doesn't use size_append, so it can be used to create normal .xz
# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
# big dictionary would increase the memory usage too much in the multi-call
# decompression mode. A BCJ filter isn't used either.
quiet_cmd_xzkern = XZKERN  $@
      cmd_xzkern = cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh > $@

quiet_cmd_xzkern_with_size = XZKERN  $@
      cmd_xzkern_with_size = { cat $(real-prereqs) | sh $(srctree)/scripts/xz_wrap.sh; \
                     $(size_append); } > $@

quiet_cmd_xzmisc = XZMISC  $@
      cmd_xzmisc = cat $(real-prereqs) | $(XZ) --check=crc32 --lzma2=dict=1MiB > $@

# ZSTD
# ---------------------------------------------------------------------------
# Appends the uncompressed size of the data using size_append. The .zst
# format has the size information available at the beginning of the file too,
# but it's in a more complex format and it's good to avoid changing the part
# of the boot code that reads the uncompressed size.
#
# Note that the bytes added by size_append will make the zstd tool think that
# the file is corrupt. This is expected.
#
# zstd uses a maximum window size of 8 MB. zstd22 uses a maximum window size of
# 128 MB. zstd22 is used for kernel compression because it is decompressed in a
# single pass, so zstd doesn't need to allocate a window buffer. When streaming
# decompression is used, like initramfs decompression, zstd22 should likely not
# be used because it would require zstd to allocate a 128 MB buffer.

quiet_cmd_zstd = ZSTD    $@
      cmd_zstd = cat $(real-prereqs) | $(ZSTD) -19 > $@

quiet_cmd_zstd22 = ZSTD22  $@
      cmd_zstd22 = cat $(real-prereqs) | $(ZSTD) -22 --ultra > $@

quiet_cmd_zstd22_with_size = ZSTD22  $@
      cmd_zstd22_with_size = { cat $(real-prereqs) | $(ZSTD) -22 --ultra; $(size_append); } > $@

# ASM offsets
# ---------------------------------------------------------------------------

# Default sed regexp - multiline due to syntax constraints
#
# Use [:space:] because LLVM's integrated assembler inserts <tab> around
# the .ascii directive whereas GCC keeps the <space> as-is.
define sed-offsets
	's:^[[:space:]]*\.ascii[[:space:]]*"\(.*\)".*:\1:; \
	/^->/{s:->#\(.*\):/* \1 */:; \
	s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
	s:->::; p;}'
endef

# Use filechk to avoid rebuilds when a header changes, but the resulting file
# does not
define filechk_offsets
	 echo "#ifndef $2"; \
	 echo "#define $2"; \
	 echo "/*"; \
	 echo " * DO NOT MODIFY."; \
	 echo " *"; \
	 echo " * This file was generated by Kbuild"; \
	 echo " */"; \
	 echo ""; \
	 sed -ne $(sed-offsets) < $<; \
	 echo ""; \
	 echo "#endif"
endef