blob: 8c696b64ab247a749743833032e78d17cc4361ee [file] [log] [blame]
#include "headers.h"
#define DDR_DUMP_INTERNAL_DEVICE_MEMORY 0xBFC02B00
#define MIPS_CLOCK_REG 0x0f000820
//DDR INIT-133Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 //index for 0x0F007000
static struct bcm_ddr_setting asT3_DDRSetting133MHz[]= {// # DPLL Clock Setting
{0x0F000800,0x00007212},
{0x0f000820,0x07F13FFF},
{0x0f000810,0x00000F95},
{0x0f000860,0x00000000},
{0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
{0x0f000840,0x0FFF1B00},
{0x0f000870,0x00000002},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0F00a084,0x1Cffffff},
{0x0F00a080,0x1C000000},
{0x0F00a04C,0x0000000C},
//Memcontroller Default values
{0x0F007000,0x00010001},
{0x0F007004,0x01010100},
{0x0F007008,0x01000001},
{0x0F00700c,0x00000000},
{0x0F007010,0x01000000},
{0x0F007014,0x01000100},
{0x0F007018,0x01000000},
{0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
{0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
{0x0F007024,0x02000007},
{0x0F007028,0x02020202},
{0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
{0x0F007030,0x05000000},
{0x0F007034,0x00000003},
{0x0F007038,0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
{0x0F00703C,0x02101010},//ROB - 0x02101010,//0x02101018},
{0x0F007040,0x45751200},//ROB - 0x45751200,//0x450f1200},
{0x0F007044,0x110a0d00},//ROB - 0x110a0d00//0x111f0d00
{0x0F007048,0x081b0306},
{0x0F00704c,0x00000000},
{0x0F007050,0x0000001c},
{0x0F007054,0x00000000},
{0x0F007058,0x00000000},
{0x0F00705c,0x00000000},
{0x0F007060,0x0010246c},
{0x0F007064,0x00000010},
{0x0F007068,0x00000000},
{0x0F00706c,0x00000001},
{0x0F007070,0x00007000},
{0x0F007074,0x00000000},
{0x0F007078,0x00000000},
{0x0F00707C,0x00000000},
{0x0F007080,0x00000000},
{0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
{0x0F007094,0x00000104},
//# Enable 2 ports within X-bar
{0x0F00A000,0x00000016},
//# Enable start bit within memory controller
{0x0F007018,0x01010000}
};
//80Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 //index for 0x0F007000
static struct bcm_ddr_setting asT3_DDRSetting80MHz[]= {// # DPLL Clock Setting
{0x0f000810,0x00000F95},
{0x0f000820,0x07f1ffff},
{0x0f000860,0x00000000},
{0x0f000880,0x000003DD},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0F00a084,0x1Cffffff},
{0x0F00a080,0x1C000000},
{0x0F00a000,0x00000016},
{0x0F00a04C,0x0000000C},
//Memcontroller Default values
{0x0F007000,0x00010001},
{0x0F007004,0x01000000},
{0x0F007008,0x01000001},
{0x0F00700c,0x00000000},
{0x0F007010,0x01000000},
{0x0F007014,0x01000100},
{0x0F007018,0x01000000},
{0x0F00701c,0x01020000},
{0x0F007020,0x04020107},
{0x0F007024,0x00000007},
{0x0F007028,0x02020201},
{0x0F00702c,0x0204040a},
{0x0F007030,0x04000000},
{0x0F007034,0x00000002},
{0x0F007038,0x1F060200},
{0x0F00703C,0x1C22221F},
{0x0F007040,0x8A006600},
{0x0F007044,0x221a0800},
{0x0F007048,0x02690204},
{0x0F00704c,0x00000000},
{0x0F007050,0x0000001c},
{0x0F007054,0x00000000},
{0x0F007058,0x00000000},
{0x0F00705c,0x00000000},
{0x0F007060,0x000A15D6},
{0x0F007064,0x0000000A},
{0x0F007068,0x00000000},
{0x0F00706c,0x00000001},
{0x0F007070,0x00004000},
{0x0F007074,0x00000000},
{0x0F007078,0x00000000},
{0x0F00707C,0x00000000},
{0x0F007080,0x00000000},
{0x0F007084,0x00000000},
{0x0F007094,0x00000104},
//# Enable start bit within memory controller
{0x0F007018,0x01010000}
};
//100Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 //index for 0x0F007000
static struct bcm_ddr_setting asT3_DDRSetting100MHz[]= {// # DPLL Clock Setting
{0x0F000800,0x00007008},
{0x0f000810,0x00000F95},
{0x0f000820,0x07F13E3F},
{0x0f000860,0x00000000},
{0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
//0x0f000840,0x0FFF1800,
{0x0f000840,0x0FFF1B00},
{0x0f000870,0x00000002},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0F00a084,0x1Cffffff},
{0x0F00a080,0x1C000000},
{0x0F00a04C,0x0000000C},
//# Enable 2 ports within X-bar
{0x0F00A000,0x00000016},
//Memcontroller Default values
{0x0F007000,0x00010001},
{0x0F007004,0x01010100},
{0x0F007008,0x01000001},
{0x0F00700c,0x00000000},
{0x0F007010,0x01000000},
{0x0F007014,0x01000100},
{0x0F007018,0x01000000},
{0x0F00701c,0x01020001}, // POP - 0x00020000 Normal 0x01020000
{0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107
{0x0F007024,0x00000007},
{0x0F007028,0x01020201},
{0x0F00702c,0x0204040A},
{0x0F007030,0x06000000},
{0x0F007034,0x00000004},
{0x0F007038,0x20080200},
{0x0F00703C,0x02030320},
{0x0F007040,0x6E7F1200},
{0x0F007044,0x01190A00},
{0x0F007048,0x06120305},//0x02690204 // 0x06120305
{0x0F00704c,0x00000000},
{0x0F007050,0x0000001C},
{0x0F007054,0x00000000},
{0x0F007058,0x00000000},
{0x0F00705c,0x00000000},
{0x0F007060,0x00082ED6},
{0x0F007064,0x0000000A},
{0x0F007068,0x00000000},
{0x0F00706c,0x00000001},
{0x0F007070,0x00005000},
{0x0F007074,0x00000000},
{0x0F007078,0x00000000},
{0x0F00707C,0x00000000},
{0x0F007080,0x00000000},
{0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
{0x0F007094,0x00000104},
//# Enable start bit within memory controller
{0x0F007018,0x01010000}
};
//Net T3B DDR Settings
//DDR INIT-133Mhz
static struct bcm_ddr_setting asDPLL_266MHZ[] = {
{0x0F000800,0x00007212},
{0x0f000820,0x07F13FFF},
{0x0f000810,0x00000F95},
{0x0f000860,0x00000000},
{0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
{0x0f000840,0x0FFF1B00},
{0x0f000870,0x00000002}
};
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 //index for 0x0F007000
static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock Setting
{0x0f000810,0x00000F95},
{0x0f000810,0x00000F95},
{0x0f000810,0x00000F95},
{0x0f000820,0x07F13652},
{0x0f000840,0x0FFF0800},
// Changed source for X-bar and MIPS clock to APLL
{0x0f000880,0x000003DD},
{0x0f000860,0x00000000},
// Changed source for X-bar and MIPS clock to APLL
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0F00a084,0x1Cffffff},
{0x0F00a080,0x1C000000},
//# Enable 2 ports within X-bar
{0x0F00A000,0x00000016},
//Memcontroller Default values
{0x0F007000,0x00010001},
{0x0F007004,0x01010100},
{0x0F007008,0x01000001},
{0x0F00700c,0x00000000},
{0x0F007010,0x01000000},
{0x0F007014,0x01000100},
{0x0F007018,0x01000000},
{0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
{0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
{0x0F007024,0x02000007},
{0x0F007028,0x02020202},
{0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
{0x0F007030,0x05000000},
{0x0F007034,0x00000003},
{0x0F007038,0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
{0x0F00703C,0x02101012},//ROB - 0x02101010,//0x02101018},
{0x0F007040,0x457D1200},//ROB - 0x45751200,//0x450f1200},
{0x0F007044,0x11130d00},//ROB - 0x110a0d00//0x111f0d00
{0x0F007048,0x040D0306},
{0x0F00704c,0x00000000},
{0x0F007050,0x0000001c},
{0x0F007054,0x00000000},
{0x0F007058,0x00000000},
{0x0F00705c,0x00000000},
{0x0F007060,0x0010246c},
{0x0F007064,0x00000012},
{0x0F007068,0x00000000},
{0x0F00706c,0x00000001},
{0x0F007070,0x00007000},
{0x0F007074,0x00000000},
{0x0F007078,0x00000000},
{0x0F00707C,0x00000000},
{0x0F007080,0x00000000},
{0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
{0x0F007094,0x00000104},
//# Enable start bit within memory controller
{0x0F007018,0x01010000},
};
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000
static struct bcm_ddr_setting asT3B_DDRSetting80MHz[] = {// # DPLL Clock Setting
{0x0f000810,0x00000F95},
{0x0f000820,0x07F13FFF},
{0x0f000840,0x0FFF1F00},
{0x0f000880,0x000003DD},
{0x0f000860,0x00000000},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0F00a084,0x1Cffffff},
{0x0F00a080,0x1C000000},
{0x0F00a000,0x00000016},
//Memcontroller Default values
{0x0F007000,0x00010001},
{0x0F007004,0x01000000},
{0x0F007008,0x01000001},
{0x0F00700c,0x00000000},
{0x0F007010,0x01000000},
{0x0F007014,0x01000100},
{0x0F007018,0x01000000},
{0x0F00701c,0x01020000},
{0x0F007020,0x04020107},
{0x0F007024,0x00000007},
{0x0F007028,0x02020201},
{0x0F00702c,0x0204040a},
{0x0F007030,0x04000000},
{0x0F007034,0x02000002},
{0x0F007038,0x1F060202},
{0x0F00703C,0x1C22221F},
{0x0F007040,0x8A006600},
{0x0F007044,0x221a0800},
{0x0F007048,0x02690204},
{0x0F00704c,0x00000000},
{0x0F007050,0x0100001c},
{0x0F007054,0x00000000},
{0x0F007058,0x00000000},
{0x0F00705c,0x00000000},
{0x0F007060,0x000A15D6},
{0x0F007064,0x0000000A},
{0x0F007068,0x00000000},
{0x0F00706c,0x00000001},
{0x0F007070,0x00004000},
{0x0F007074,0x00000000},
{0x0F007078,0x00000000},
{0x0F00707C,0x00000000},
{0x0F007080,0x00000000},
{0x0F007084,0x00000000},
{0x0F007094,0x00000104},
//# Enable start bit within memory controller
{0x0F007018,0x01010000}
};
//100Mhz
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 9 //index for 0x0F007000
static struct bcm_ddr_setting asT3B_DDRSetting100MHz[] = {// # DPLL Clock Setting
{0x0f000810,0x00000F95},
{0x0f000820,0x07F1369B},
{0x0f000840,0x0FFF0800},
{0x0f000880,0x000003DD},
{0x0f000860,0x00000000},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0F00a084,0x1Cffffff},
{0x0F00a080,0x1C000000},
//# Enable 2 ports within X-bar
{0x0F00A000,0x00000016},
//Memcontroller Default values
{0x0F007000,0x00010001},
{0x0F007004,0x01010100},
{0x0F007008,0x01000001},
{0x0F00700c,0x00000000},
{0x0F007010,0x01000000},
{0x0F007014,0x01000100},
{0x0F007018,0x01000000},
{0x0F00701c,0x01020000}, // POP - 0x00020000 Normal 0x01020000
{0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107
{0x0F007024,0x00000007},
{0x0F007028,0x01020201},
{0x0F00702c,0x0204040A},
{0x0F007030,0x06000000},
{0x0F007034,0x02000004},
{0x0F007038,0x20080200},
{0x0F00703C,0x02030320},
{0x0F007040,0x6E7F1200},
{0x0F007044,0x01190A00},
{0x0F007048,0x06120305},//0x02690204 // 0x06120305
{0x0F00704c,0x00000000},
{0x0F007050,0x0100001C},
{0x0F007054,0x00000000},
{0x0F007058,0x00000000},
{0x0F00705c,0x00000000},
{0x0F007060,0x00082ED6},
{0x0F007064,0x0000000A},
{0x0F007068,0x00000000},
{0x0F00706c,0x00000001},
{0x0F007070,0x00005000},
{0x0F007074,0x00000000},
{0x0F007078,0x00000000},
{0x0F00707C,0x00000000},
{0x0F007080,0x00000000},
{0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
{0x0F007094,0x00000104},
//# Enable start bit within memory controller
{0x0F007018,0x01010000}
};
#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 9 //index for 0x0F007000
static struct bcm_ddr_setting asT3LP_DDRSetting133MHz[]= {// # DPLL Clock Setting
{0x0f000820,0x03F1365B},
{0x0f000810,0x00002F95},
{0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
{0x0f000840,0x0FFF0000},
{0x0f000860,0x00000000},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0F00a084,0x1Cffffff},
{0x0F00a080,0x1C000000},
{0x0F00A000,0x00000016},
//Memcontroller Default values
{0x0F007000,0x00010001},
{0x0F007004,0x01010100},
{0x0F007008,0x01000001},
{0x0F00700c,0x00000000},
{0x0F007010,0x01000000},
{0x0F007014,0x01000100},
{0x0F007018,0x01000000},
{0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
{0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
{0x0F007024,0x02000007},
{0x0F007028,0x02020200},
{0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
{0x0F007030,0x05000000},
{0x0F007034,0x00000003},
{0x0F007038,0x200a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
{0x0F00703C,0x02101020},//ROB - 0x02101010,//0x02101018,
{0x0F007040,0x45711200},//ROB - 0x45751200,//0x450f1200,
{0x0F007044,0x110D0D00},//ROB - 0x110a0d00//0x111f0d00
{0x0F007048,0x04080306},
{0x0F00704c,0x00000000},
{0x0F007050,0x0100001c},
{0x0F007054,0x00000000},
{0x0F007058,0x00000000},
{0x0F00705c,0x00000000},
{0x0F007060,0x0010245F},
{0x0F007064,0x00000010},
{0x0F007068,0x00000000},
{0x0F00706c,0x00000001},
{0x0F007070,0x00007000},
{0x0F007074,0x00000000},
{0x0F007078,0x00000000},
{0x0F00707C,0x00000000},
{0x0F007080,0x00000000},
{0x0F007084,0x00000000},
{0x0F007088,0x01000001},
{0x0F00708c,0x00000101},
{0x0F007090,0x00000000},
//# Enable BW improvement within memory controller
{0x0F007094,0x00040000},
{0x0F007098,0x00000000},
{0x0F0070c8,0x00000104},
//# Enable 2 ports within X-bar
//# Enable start bit within memory controller
{0x0F007018,0x01010000}
};
#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 11 //index for 0x0F007000
static struct bcm_ddr_setting asT3LP_DDRSetting100MHz[]= {// # DPLL Clock Setting
{0x0f000810,0x00002F95},
{0x0f000820,0x03F1369B},
{0x0f000840,0x0fff0000},
{0x0f000860,0x00000000},
{0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
{0x0f000840,0x0FFF0000},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0F00a084,0x1Cffffff},
{0x0F00a080,0x1C000000},
//Memcontroller Default values
{0x0F007000,0x00010001},
{0x0F007004,0x01010100},
{0x0F007008,0x01000001},
{0x0F00700c,0x00000000},
{0x0F007010,0x01000000},
{0x0F007014,0x01000100},
{0x0F007018,0x01000000},
{0x0F00701c,0x01020000},// POP - 0x00020001 Normal 0x01020001
{0x0F007020,0x04020107}, //Normal - 0x04030107 POP - 0x05030107
{0x0F007024,0x00000007},
{0x0F007028,0x01020200},
{0x0F00702c,0x0204040a},//ROB- 0x0205050a,//0x0206060a
{0x0F007030,0x06000000},
{0x0F007034,0x00000004},
{0x0F007038,0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
{0x0F00703C,0x0203031F},//ROB - 0x02101010,//0x02101018,
{0x0F007040,0x6e001200},//ROB - 0x45751200,//0x450f1200,
{0x0F007044,0x011a0a00},//ROB - 0x110a0d00//0x111f0d00
{0x0F007048,0x03000305},
{0x0F00704c,0x00000000},
{0x0F007050,0x0100001c},
{0x0F007054,0x00000000},
{0x0F007058,0x00000000},
{0x0F00705c,0x00000000},
{0x0F007060,0x00082ED6},
{0x0F007064,0x0000000A},
{0x0F007068,0x00000000},
{0x0F00706c,0x00000001},
{0x0F007070,0x00005000},
{0x0F007074,0x00000000},
{0x0F007078,0x00000000},
{0x0F00707C,0x00000000},
{0x0F007080,0x00000000},
{0x0F007084,0x00000000},
{0x0F007088,0x01000001},
{0x0F00708c,0x00000101},
{0x0F007090,0x00000000},
{0x0F007094,0x00010000},
{0x0F007098,0x00000000},
{0x0F0070C8,0x00000104},
//# Enable 2 ports within X-bar
{0x0F00A000,0x00000016},
//# Enable start bit within memory controller
{0x0F007018,0x01010000}
};
#define T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000
static struct bcm_ddr_setting asT3LP_DDRSetting80MHz[]= {// # DPLL Clock Setting
{0x0f000820,0x07F13FFF},
{0x0f000810,0x00002F95},
{0x0f000860,0x00000000},
{0x0f000880,0x000003DD},
{0x0f000840,0x0FFF1F00},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0F00a084,0x1Cffffff},
{0x0F00a080,0x1C000000},
{0x0F00A000,0x00000016},
{0x0f007000,0x00010001},
{0x0f007004,0x01000000},
{0x0f007008,0x01000001},
{0x0f00700c,0x00000000},
{0x0f007010,0x01000000},
{0x0f007014,0x01000100},
{0x0f007018,0x01000000},
{0x0f00701c,0x01020000},
{0x0f007020,0x04020107},
{0x0f007024,0x00000007},
{0x0f007028,0x02020200},
{0x0f00702c,0x0204040a},
{0x0f007030,0x04000000},
{0x0f007034,0x00000002},
{0x0f007038,0x1d060200},
{0x0f00703c,0x1c22221d},
{0x0f007040,0x8A116600},
{0x0f007044,0x222d0800},
{0x0f007048,0x02690204},
{0x0f00704c,0x00000000},
{0x0f007050,0x0100001c},
{0x0f007054,0x00000000},
{0x0f007058,0x00000000},
{0x0f00705c,0x00000000},
{0x0f007060,0x000A15D6},
{0x0f007064,0x0000000A},
{0x0f007068,0x00000000},
{0x0f00706c,0x00000001},
{0x0f007070,0x00004000},
{0x0f007074,0x00000000},
{0x0f007078,0x00000000},
{0x0f00707c,0x00000000},
{0x0f007080,0x00000000},
{0x0f007084,0x00000000},
{0x0f007088,0x01000001},
{0x0f00708c,0x00000101},
{0x0f007090,0x00000000},
{0x0f007094,0x00010000},
{0x0f007098,0x00000000},
{0x0F0070C8,0x00000104},
{0x0F007018,0x01010000}
};
///T3 LP-B (UMA-B)
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ 7 //index for 0x0F007000
static struct bcm_ddr_setting asT3LPB_DDRSetting160MHz[]= {// # DPLL Clock Setting
{0x0f000820,0x03F137DB},
{0x0f000810,0x01842795},
{0x0f000860,0x00000000},
{0x0f000880,0x000003DD},
{0x0f000840,0x0FFF0400},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0f003050,0x00000021},//this is flash/eeprom clock divisor which set the flash clock to 20 MHz
{0x0F00a084,0x1Cffffff},//Now dump from her in internal memory
{0x0F00a080,0x1C000000},
{0x0F00A000,0x00000016},
{0x0f007000,0x00010001},
{0x0f007004,0x01000001},
{0x0f007008,0x01000101},
{0x0f00700c,0x00000000},
{0x0f007010,0x01000100},
{0x0f007014,0x01000100},
{0x0f007018,0x01000000},
{0x0f00701c,0x01020000},
{0x0f007020,0x04030107},
{0x0f007024,0x02000007},
{0x0f007028,0x02020200},
{0x0f00702c,0x0206060a},
{0x0f007030,0x050d0d00},
{0x0f007034,0x00000003},
{0x0f007038,0x170a0200},
{0x0f00703c,0x02101012},
{0x0f007040,0x45161200},
{0x0f007044,0x11250c00},
{0x0f007048,0x04da0307},
{0x0f00704c,0x00000000},
{0x0f007050,0x0000001c},
{0x0f007054,0x00000000},
{0x0f007058,0x00000000},
{0x0f00705c,0x00000000},
{0x0f007060,0x00142bb6},
{0x0f007064,0x20430014},
{0x0f007068,0x00000000},
{0x0f00706c,0x00000001},
{0x0f007070,0x00009000},
{0x0f007074,0x00000000},
{0x0f007078,0x00000000},
{0x0f00707c,0x00000000},
{0x0f007080,0x00000000},
{0x0f007084,0x00000000},
{0x0f007088,0x01000001},
{0x0f00708c,0x00000101},
{0x0f007090,0x00000000},
{0x0f007094,0x00040000},
{0x0f007098,0x00000000},
{0x0F0070C8,0x00000104},
{0x0F007018,0x01010000}
};
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 7 //index for 0x0F007000
static struct bcm_ddr_setting asT3LPB_DDRSetting133MHz[]= {// # DPLL Clock Setting
{0x0f000820,0x03F1365B},
{0x0f000810,0x00002F95},
{0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
{0x0f000840,0x0FFF0000},
{0x0f000860,0x00000000},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
{0x0F00a084,0x1Cffffff},//dump from here in internal memory
{0x0F00a080,0x1C000000},
{0x0F00A000,0x00000016},
//Memcontroller Default values
{0x0F007000,0x00010001},
{0x0F007004,0x01010100},
{0x0F007008,0x01000001},
{0x0F00700c,0x00000000},
{0x0F007010,0x01000000},
{0x0F007014,0x01000100},
{0x0F007018,0x01000000},
{0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
{0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
{0x0F007024,0x02000007},
{0x0F007028,0x02020200},
{0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
{0x0F007030,0x05000000},
{0x0F007034,0x00000003},
{0x0F007038,0x190a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
{0x0F00703C,0x02101017},//ROB - 0x02101010,//0x02101018,
{0x0F007040,0x45171200},//ROB - 0x45751200,//0x450f1200,
{0x0F007044,0x11290D00},//ROB - 0x110a0d00//0x111f0d00
{0x0F007048,0x04080306},
{0x0F00704c,0x00000000},
{0x0F007050,0x0100001c},
{0x0F007054,0x00000000},
{0x0F007058,0x00000000},
{0x0F00705c,0x00000000},
{0x0F007060,0x0010245F},
{0x0F007064,0x00000010},
{0x0F007068,0x00000000},
{0x0F00706c,0x00000001},
{0x0F007070,0x00007000},
{0x0F007074,0x00000000},
{0x0F007078,0x00000000},
{0x0F00707C,0x00000000},
{0x0F007080,0x00000000},
{0x0F007084,0x00000000},
{0x0F007088,0x01000001},
{0x0F00708c,0x00000101},
{0x0F007090,0x00000000},
//# Enable BW improvement within memory controller
{0x0F007094,0x00040000},
{0x0F007098,0x00000000},
{0x0F0070c8,0x00000104},
//# Enable 2 ports within X-bar
//# Enable start bit within memory controller
{0x0F007018,0x01010000}
};
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 8 //index for 0x0F007000
static struct bcm_ddr_setting asT3LPB_DDRSetting100MHz[]= {// # DPLL Clock Setting
{0x0f000810,0x00002F95},
{0x0f000820,0x03F1369B},
{0x0f000840,0x0fff0000},
{0x0f000860,0x00000000},
{0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
{0x0f000840,0x0FFF0000},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
{0x0F00a084,0x1Cffffff}, //dump from here in internal memory
{0x0F00a080,0x1C000000},
//Memcontroller Default values
{0x0F007000,0x00010001},
{0x0F007004,0x01010100},
{0x0F007008,0x01000001},
{0x0F00700c,0x00000000},
{0x0F007010,0x01000000},
{0x0F007014,0x01000100},
{0x0F007018,0x01000000},
{0x0F00701c,0x01020000},// POP - 0x00020001 Normal 0x01020001
{0x0F007020,0x04020107}, //Normal - 0x04030107 POP - 0x05030107
{0x0F007024,0x00000007},
{0x0F007028,0x01020200},
{0x0F00702c,0x0204040a},//ROB- 0x0205050a,//0x0206060a
{0x0F007030,0x06000000},
{0x0F007034,0x00000004},
{0x0F007038,0x1F080200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
{0x0F00703C,0x0203031F},//ROB - 0x02101010,//0x02101018,
{0x0F007040,0x6e001200},//ROB - 0x45751200,//0x450f1200,
{0x0F007044,0x011a0a00},//ROB - 0x110a0d00//0x111f0d00
{0x0F007048,0x03000305},
{0x0F00704c,0x00000000},
{0x0F007050,0x0100001c},
{0x0F007054,0x00000000},
{0x0F007058,0x00000000},
{0x0F00705c,0x00000000},
{0x0F007060,0x00082ED6},
{0x0F007064,0x0000000A},
{0x0F007068,0x00000000},
{0x0F00706c,0x00000001},
{0x0F007070,0x00005000},
{0x0F007074,0x00000000},
{0x0F007078,0x00000000},
{0x0F00707C,0x00000000},
{0x0F007080,0x00000000},
{0x0F007084,0x00000000},
{0x0F007088,0x01000001},
{0x0F00708c,0x00000101},
{0x0F007090,0x00000000},
{0x0F007094,0x00010000},
{0x0F007098,0x00000000},
{0x0F0070C8,0x00000104},
//# Enable 2 ports within X-bar
{0x0F00A000,0x00000016},
//# Enable start bit within memory controller
{0x0F007018,0x01010000}
};
#define T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 7 //index for 0x0F007000
static struct bcm_ddr_setting asT3LPB_DDRSetting80MHz[]= {// # DPLL Clock Setting
{0x0f000820,0x07F13FFF},
{0x0f000810,0x00002F95},
{0x0f000860,0x00000000},
{0x0f000880,0x000003DD},
{0x0f000840,0x0FFF1F00},
{0x0F00a044,0x1fffffff},
{0x0F00a040,0x1f000000},
{0x0f003050,0x00000021},//flash/eeprom clock divisor which set the flash clock to 20 MHz
{0x0F00a084,0x1Cffffff},// dump from here in internal memory
{0x0F00a080,0x1C000000},
{0x0F00A000,0x00000016},
{0x0f007000,0x00010001},
{0x0f007004,0x01000000},
{0x0f007008,0x01000001},
{0x0f00700c,0x00000000},
{0x0f007010,0x01000000},
{0x0f007014,0x01000100},
{0x0f007018,0x01000000},
{0x0f00701c,0x01020000},
{0x0f007020,0x04020107},
{0x0f007024,0x00000007},
{0x0f007028,0x02020200},
{0x0f00702c,0x0204040a},
{0x0f007030,0x04000000},
{0x0f007034,0x00000002},
{0x0f007038,0x1d060200},
{0x0f00703c,0x1c22221d},
{0x0f007040,0x8A116600},
{0x0f007044,0x222d0800},
{0x0f007048,0x02690204},
{0x0f00704c,0x00000000},
{0x0f007050,0x0100001c},
{0x0f007054,0x00000000},
{0x0f007058,0x00000000},
{0x0f00705c,0x00000000},
{0x0f007060,0x000A15D6},
{0x0f007064,0x0000000A},
{0x0f007068,0x00000000},
{0x0f00706c,0x00000001},
{0x0f007070,0x00004000},
{0x0f007074,0x00000000},
{0x0f007078,0x00000000},
{0x0f00707c,0x00000000},
{0x0f007080,0x00000000},
{0x0f007084,0x00000000},
{0x0f007088,0x01000001},
{0x0f00708c,0x00000101},
{0x0f007090,0x00000000},
{0x0f007094,0x00010000},
{0x0f007098,0x00000000},
{0x0F0070C8,0x00000104},
{0x0F007018,0x01010000}
};
int ddr_init(struct bcm_mini_adapter *Adapter)
{
struct bcm_ddr_setting *psDDRSetting=NULL;
ULONG RegCount=0;
UINT value = 0;
UINT uiResetValue = 0;
UINT uiClockSetting = 0;
int retval = STATUS_SUCCESS;
switch (Adapter->chip_id)
{
case 0xbece3200:
switch (Adapter->DDRSetting)
{
case DDR_80_MHZ:
psDDRSetting=asT3LP_DDRSetting80MHz;
RegCount=(sizeof(asT3LP_DDRSetting80MHz)/
sizeof(struct bcm_ddr_setting));
break;
case DDR_100_MHZ:
psDDRSetting=asT3LP_DDRSetting100MHz;
RegCount=(sizeof(asT3LP_DDRSetting100MHz)/
sizeof(struct bcm_ddr_setting));
break;
case DDR_133_MHZ:
psDDRSetting=asT3LP_DDRSetting133MHz;
RegCount=(sizeof(asT3LP_DDRSetting133MHz)/
sizeof(struct bcm_ddr_setting));
if(Adapter->bMipsConfig == MIPS_200_MHZ)
{
uiClockSetting = 0x03F13652;
}
else
{
uiClockSetting = 0x03F1365B;
}
break;
default:
return -EINVAL;
}
break;
case T3LPB:
case BCS220_2:
case BCS220_2BC:
case BCS250_BC:
case BCS220_3 :
/* Set bit 2 and bit 6 to 1 for BBIC 2mA drive
* (please check current value and additionally set these bits)
*/
if( (Adapter->chip_id != BCS220_2) &&
(Adapter->chip_id != BCS220_2BC) &&
(Adapter->chip_id != BCS220_3) )
{
retval= rdmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
uiResetValue |= 0x44;
retval = wrmalt(Adapter,(UINT)0x0f000830, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, WRM, DBG_LVL_ALL, "%s:%d WRM failed\n", __FUNCTION__, __LINE__);
return retval;
}
}
switch(Adapter->DDRSetting)
{
case DDR_80_MHZ:
psDDRSetting = asT3LPB_DDRSetting80MHz;
RegCount=(sizeof(asT3B_DDRSetting80MHz)/
sizeof(struct bcm_ddr_setting));
break;
case DDR_100_MHZ:
psDDRSetting=asT3LPB_DDRSetting100MHz;
RegCount=(sizeof(asT3B_DDRSetting100MHz)/
sizeof(struct bcm_ddr_setting));
break;
case DDR_133_MHZ:
psDDRSetting = asT3LPB_DDRSetting133MHz;
RegCount=(sizeof(asT3B_DDRSetting133MHz)/
sizeof(struct bcm_ddr_setting));
if(Adapter->bMipsConfig == MIPS_200_MHZ)
{
uiClockSetting = 0x03F13652;
}
else
{
uiClockSetting = 0x03F1365B;
}
break;
case DDR_160_MHZ:
psDDRSetting = asT3LPB_DDRSetting160MHz;
RegCount = sizeof(asT3LPB_DDRSetting160MHz)/sizeof(struct bcm_ddr_setting);
if(Adapter->bMipsConfig == MIPS_200_MHZ)
{
uiClockSetting = 0x03F137D2;
}
else
{
uiClockSetting = 0x03F137DB;
}
}
break;
case 0xbece0110:
case 0xbece0120:
case 0xbece0121:
case 0xbece0130:
case 0xbece0300:
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "DDR Setting: %x\n", Adapter->DDRSetting);
switch (Adapter->DDRSetting)
{
case DDR_80_MHZ:
psDDRSetting = asT3_DDRSetting80MHz;
RegCount = (sizeof(asT3_DDRSetting80MHz)/
sizeof(struct bcm_ddr_setting));
break;
case DDR_100_MHZ:
psDDRSetting = asT3_DDRSetting100MHz;
RegCount = (sizeof(asT3_DDRSetting100MHz)/
sizeof(struct bcm_ddr_setting));
break;
case DDR_133_MHZ:
psDDRSetting = asT3_DDRSetting133MHz;
RegCount = (sizeof(asT3_DDRSetting133MHz)/
sizeof(struct bcm_ddr_setting));
break;
default:
return -EINVAL;
}
case 0xbece0310:
{
switch (Adapter->DDRSetting)
{
case DDR_80_MHZ:
psDDRSetting = asT3B_DDRSetting80MHz;
RegCount=(sizeof(asT3B_DDRSetting80MHz)/
sizeof(struct bcm_ddr_setting));
break;
case DDR_100_MHZ:
psDDRSetting=asT3B_DDRSetting100MHz;
RegCount=(sizeof(asT3B_DDRSetting100MHz)/
sizeof(struct bcm_ddr_setting));
break;
case DDR_133_MHZ:
if(Adapter->bDPLLConfig == PLL_266_MHZ)//266Mhz PLL selected.
{
memcpy(asT3B_DDRSetting133MHz, asDPLL_266MHZ,
sizeof(asDPLL_266MHZ));
psDDRSetting = asT3B_DDRSetting133MHz;
RegCount=(sizeof(asT3B_DDRSetting133MHz)/
sizeof(struct bcm_ddr_setting));
}
else
{
psDDRSetting = asT3B_DDRSetting133MHz;
RegCount=(sizeof(asT3B_DDRSetting133MHz)/
sizeof(struct bcm_ddr_setting));
if(Adapter->bMipsConfig == MIPS_200_MHZ)
{
uiClockSetting = 0x07F13652;
}
else
{
uiClockSetting = 0x07F1365B;
}
}
break;
default:
return -EINVAL;
}
break;
}
default:
return -EINVAL;
}
value=0;
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_INITEXIT, DRV_ENTRY, DBG_LVL_ALL, "Register Count is =%lu\n", RegCount);
while(RegCount && !retval)
{
if(uiClockSetting && psDDRSetting->ulRegAddress == MIPS_CLOCK_REG)
{
value = uiClockSetting;
}
else
{
value = psDDRSetting->ulRegValue;
}
retval = wrmalt(Adapter, psDDRSetting->ulRegAddress, &value, sizeof(value));
if(STATUS_SUCCESS != retval) {
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%s:%d\n", __FUNCTION__, __LINE__);
break;
}
RegCount--;
psDDRSetting++;
}
if(Adapter->chip_id >= 0xbece3300 )
{
mdelay(3);
if( (Adapter->chip_id != BCS220_2)&&
(Adapter->chip_id != BCS220_2BC)&&
(Adapter->chip_id != BCS220_3))
{
/* drive MDDR to half in case of UMA-B: */
uiResetValue = 0x01010001;
retval = wrmalt(Adapter, (UINT)0x0F007018, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
uiResetValue = 0x00040020;
retval = wrmalt(Adapter, (UINT)0x0F007094, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
uiResetValue = 0x01020101;
retval = wrmalt(Adapter, (UINT)0x0F00701c, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
uiResetValue = 0x01010000;
retval = wrmalt(Adapter, (UINT)0x0F007018, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
}
mdelay(3);
/* DC/DC standby change...
* This is to be done only for Hybrid PMU mode.
* with the current h/w there is no way to detect this.
* and since we dont have internal PMU lets do it under UMA-B chip id.
* we will change this when we will have internal PMU.
*/
if(Adapter->PmuMode == HYBRID_MODE_7C)
{
retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
uiResetValue = 0x1322a8;
retval = wrmalt(Adapter, (UINT)0x0f000d1c, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
uiResetValue = 0x132296;
retval = wrmalt(Adapter, (UINT)0x0f000d14, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
}
else if(Adapter->PmuMode == HYBRID_MODE_6 )
{
retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
uiResetValue = 0x6003229a;
retval = wrmalt(Adapter, (UINT)0x0f000d14, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
retval = rdmalt(Adapter,(UINT)0x0f000c00, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
uiResetValue = 0x1322a8;
retval = wrmalt(Adapter, (UINT)0x0f000d1c, &uiResetValue, sizeof(uiResetValue));
if(retval < 0) {
BCM_DEBUG_PRINT(Adapter,CMHOST, RDM, DBG_LVL_ALL, "%s:%d RDM failed\n", __FUNCTION__, __LINE__);
return retval;
}
}
}
Adapter->bDDRInitDone = TRUE;
return retval;
}
int download_ddr_settings(struct bcm_mini_adapter *Adapter)
{
struct bcm_ddr_setting *psDDRSetting=NULL;
ULONG RegCount=0;
unsigned long ul_ddr_setting_load_addr = DDR_DUMP_INTERNAL_DEVICE_MEMORY;
UINT value = 0;
int retval = STATUS_SUCCESS;
BOOLEAN bOverrideSelfRefresh = FALSE;
switch (Adapter->chip_id)
{
case 0xbece3200:
switch (Adapter->DDRSetting)
{
case DDR_80_MHZ:
psDDRSetting = asT3LP_DDRSetting80MHz;
RegCount = ARRAY_SIZE(asT3LP_DDRSetting80MHz);
RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
break;
case DDR_100_MHZ:
psDDRSetting = asT3LP_DDRSetting100MHz;
RegCount = ARRAY_SIZE(asT3LP_DDRSetting100MHz);
RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
break;
case DDR_133_MHZ:
bOverrideSelfRefresh = TRUE;
psDDRSetting = asT3LP_DDRSetting133MHz;
RegCount = ARRAY_SIZE(asT3LP_DDRSetting133MHz);
RegCount -= T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
psDDRSetting += T3LP_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
break;
default:
return -EINVAL;
}
break;
case T3LPB:
case BCS220_2:
case BCS220_2BC:
case BCS250_BC:
case BCS220_3 :
switch (Adapter->DDRSetting)
{
case DDR_80_MHZ:
psDDRSetting = asT3LPB_DDRSetting80MHz;
RegCount=ARRAY_SIZE(asT3LPB_DDRSetting80MHz);
RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
break;
case DDR_100_MHZ:
psDDRSetting = asT3LPB_DDRSetting100MHz;
RegCount = ARRAY_SIZE(asT3LPB_DDRSetting100MHz);
RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
break;
case DDR_133_MHZ:
bOverrideSelfRefresh = TRUE;
psDDRSetting = asT3LPB_DDRSetting133MHz;
RegCount = ARRAY_SIZE(asT3LPB_DDRSetting133MHz);
RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
break;
case DDR_160_MHZ:
bOverrideSelfRefresh = TRUE;
psDDRSetting = asT3LPB_DDRSetting160MHz;
RegCount = ARRAY_SIZE(asT3LPB_DDRSetting160MHz);
RegCount -= T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
psDDRSetting += T3LPB_SKIP_CLOCK_PROGRAM_DUMP_160MHZ;
break;
default:
return -EINVAL;
}
break;
case 0xbece0300:
switch (Adapter->DDRSetting)
{
case DDR_80_MHZ:
psDDRSetting = asT3_DDRSetting80MHz;
RegCount = ARRAY_SIZE(asT3_DDRSetting80MHz);
RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
break;
case DDR_100_MHZ:
psDDRSetting = asT3_DDRSetting100MHz;
RegCount = ARRAY_SIZE(asT3_DDRSetting100MHz);
RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
break;
case DDR_133_MHZ:
psDDRSetting = asT3_DDRSetting133MHz;
RegCount = ARRAY_SIZE(asT3_DDRSetting133MHz);
RegCount-=T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
psDDRSetting += T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
break;
default:
return -EINVAL;
}
break;
case 0xbece0310:
{
switch (Adapter->DDRSetting)
{
case DDR_80_MHZ:
psDDRSetting = asT3B_DDRSetting80MHz;
RegCount = ARRAY_SIZE(asT3B_DDRSetting80MHz);
RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ ;
psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ;
break;
case DDR_100_MHZ:
psDDRSetting = asT3B_DDRSetting100MHz;
RegCount = ARRAY_SIZE(asT3B_DDRSetting100MHz);
RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ ;
psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_100MHZ;
break;
case DDR_133_MHZ:
bOverrideSelfRefresh = TRUE;
psDDRSetting = asT3B_DDRSetting133MHz;
RegCount = ARRAY_SIZE(asT3B_DDRSetting133MHz);
RegCount -= T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ ;
psDDRSetting += T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ;
break;
}
break;
}
default:
return -EINVAL;
}
//total number of Register that has to be dumped
value =RegCount ;
retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
if(retval)
{
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%s:%d\n", __FUNCTION__, __LINE__);
return retval;
}
ul_ddr_setting_load_addr+=sizeof(ULONG);
/*signature */
value =(0x1d1e0dd0);
retval = wrmalt(Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
if(retval)
{
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%s:%d\n", __FUNCTION__, __LINE__);
return retval;
}
ul_ddr_setting_load_addr+=sizeof(ULONG);
RegCount*=(sizeof(struct bcm_ddr_setting)/sizeof(ULONG));
while(RegCount && !retval)
{
value = psDDRSetting->ulRegAddress ;
retval = wrmalt( Adapter, ul_ddr_setting_load_addr, &value, sizeof(value));
ul_ddr_setting_load_addr+=sizeof(ULONG);
if(!retval)
{
if(bOverrideSelfRefresh && (psDDRSetting->ulRegAddress == 0x0F007018))
{
value = (psDDRSetting->ulRegValue |(1<<8));
if(STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr,
&value, sizeof(value))){
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%s:%d\n", __FUNCTION__, __LINE__);
break;
}
}
else
{
value = psDDRSetting->ulRegValue;
if(STATUS_SUCCESS != wrmalt(Adapter, ul_ddr_setting_load_addr ,
&value, sizeof(value))){
BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"%s:%d\n", __FUNCTION__, __LINE__);
break;
}
}
}
ul_ddr_setting_load_addr+=sizeof(ULONG);
RegCount--;
psDDRSetting++;
}
return retval;
}