blob: 4254c0426db99ba74379f2661f61b9859f9e126c [file] [log] [blame]
#ifndef _INC_LIBSBEW_H_
#define _INC_LIBSBEW_H_
/*-----------------------------------------------------------------------------
* libsbew.h - common library elements, charge across mulitple boards
*
* This file contains common Ioctl structures and contents definitions.
*
* Copyright (C) 2004-2005 SBE, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* For further information, contact via email: support@sbei.com
* SBE, Inc. San Ramon, California U.S.A.
*-----------------------------------------------------------------------------
*/
/********************************/
/** set driver logging level **/
/********************************/
/* routine/ioctl: wancfg_set_loglevel() - SBE_IOC_SET_LOGLEVEL */
#define LOG_NONE 0
#define LOG_ERROR 1
#define LOG_SBEBUG3 3 /* hidden, for development/debug usage */
#define LOG_LSCHANGE 5 /* line state change logging */
#define LOG_LSIMMEDIATE 6 /* line state change logging w/o hysterisis */
#define LOG_WARN 8
#define LOG_MONITOR 10
#define LOG_SBEBUG12 12 /* hidden, for development/debug usage */
#define LOG_MONITOR2 14 /* hidden, for development/debug usage */
#define LOG_DEBUG 16
/* TEMPORARY DEFINES *//* RLD DEBUG */
#define c4_LOG_NONE LOG_NONE
#define c4_LOG_ERROR LOG_ERROR
#define c4_LOG_WARN LOG_WARN
#define c4_LOG_sTrace LOG_MONITOR /* do some trace logging into
* functions */
#define c4_LOG_DEBUG LOG_DEBUG
#define c4_LOG_MAX LOG_DEBUG
/******************************/
/** get driver information **/
/******************************/
/* routine/ioctl: wancfg_get_drvinfo() - SBE_IOC_GET_DRVINFO */
#define REL_STRLEN 80
struct sbe_drv_info
{
int rel_strlen;
char release[REL_STRLEN];
};
/*****************************/
/** get board information **/
/*****************************/
/* routine/ioctl: wancfg_get_brdinfo() - SBE_IOC_GET_BRDINFO */
#define CHNM_STRLEN 16
struct sbe_brd_info
{
u_int32_t brd_id; /* SBE's unique PCI VENDOR/DEVID */
u_int32_t brd_sn;
int brd_chan_cnt; /* number of channels being used */
int brd_port_cnt; /* number of ports being used */
unsigned char brdno; /* our board number */
unsigned char brd_pci_speed; /* PCI speed, 33/66Mhz */
u_int8_t brd_mac_addr[6];
char first_iname[CHNM_STRLEN]; /* first assigned channel's
* interface name */
char last_iname[CHNM_STRLEN]; /* last assigned channel's
* interface name */
u_int8_t brd_hdw_id; /* on/board unique hdw ID */
u_int8_t reserved8[3]; /* alignment preservation */
u_int32_t reserved32[3]; /* size preservation */
};
/* These IDs are sometimes available thru pci_ids.h, but not currently. */
#define PCI_VENDOR_ID_SBE 0x1176
#define PCI_DEVICE_ID_WANPMC_C4T1E1 0x0701 /* BID 0x0X, BTYP 0x0X */
#define PCI_DEVICE_ID_WANPTMC_C4T1E1 0x0702 /* BID 0x41 */
#define PCI_DEVICE_ID_WANADAPT_HC4T1E1 0x0703 /* BID 0x44 */
#define PCI_DEVICE_ID_WANPTMC_256T3_T1 0x0704 /* BID 0x42 (T1 Version) */
#define PCI_DEVICE_ID_WANPCI_C4T1E1 0x0705 /* BID 0x1X, BTYP 0x0X */
#define PCI_DEVICE_ID_WANPMC_C1T3 0x0706 /* BID 0x45 */
#define PCI_DEVICE_ID_WANPCI_C2T1E1 0x0707 /* BID 0x1X, BTYP 0x2X */
#define PCI_DEVICE_ID_WANPCI_C1T1E1 0x0708 /* BID 0x1X, BTYP 0x1X */
#define PCI_DEVICE_ID_WANPMC_C2T1E1 0x0709 /* BID 0x0X, BTYP 0x2X */
#define PCI_DEVICE_ID_WANPMC_C1T1E1 0x070A /* BID 0x0X, BTYP 0x1X */
#define PCI_DEVICE_ID_WANPTMC_256T3_E1 0x070B /* BID 0x46 (E1 Version) */
#define PCI_DEVICE_ID_WANPTMC_C24TE1 0x070C /* BID 0x47 */
#define PCI_DEVICE_ID_WANPMC_C4T1E1_L 0x070D /* BID 0x2X, BTYPE 0x0X w/FP
* LEDs */
#define PCI_DEVICE_ID_WANPMC_C2T1E1_L 0x070E /* BID 0x2X, BTYPE 0x2X w/FP
* LEDs */
#define PCI_DEVICE_ID_WANPMC_C1T1E1_L 0x070F /* BID 0x2X, BTYPE 0x1X w/FP
* LEDs */
#define PCI_DEVICE_ID_WANPMC_2SSI 0x0801
#define PCI_DEVICE_ID_WANPCI_4SSI 0x0802
#define PCI_DEVICE_ID_WANPMC_2T3E3 0x0900 /* BID 0x43 */
#define SBE_BOARD_ID(v,id) ((v<<16) | id)
#define BINFO_PCI_SPEED_unk 0
#define BINFO_PCI_SPEED_33 1
#define BINFO_PCI_SPEED_66 2
/***************************/
/** obtain interface ID **/
/***************************/
/* routine/ioctl: wancfg_get_iid() - SBE_IOC_IID_GET */
struct sbe_iid_info
{
u_int32_t channum; /* channel requested */
char iname[CHNM_STRLEN]; /* channel's interface name */
};
/**************************************/
/** get board address information **/
/**************************************/
/* routine/ioctl: wancfg_get_brdaddr() - SBE_IOC_BRDADDR_GET */
struct sbe_brd_addr
{
unsigned char func; /* select PCI address space function */
unsigned char brdno; /* returns brdno requested */
unsigned char irq;
unsigned char size; /* returns size of address */
#define BRDADDR_SIZE_64 1
#define BRDADDR_SIZE_32 2
int reserved1; /* mod64 align, reserved for future use */
union
{
unsigned long virt64; /* virtual/mapped address */
u_int32_t virt32[2];
} v;
union
{
unsigned long phys64; /* physical bus address */
u_int32_t phys32[2];
} p;
int reserved2[4]; /* reserved for future use */
};
/**********************************/
/** read/write board registers **/
/**********************************/
/* routine/ioctl: wancfg_read_vec() - SBE_IOC_READ_VEC */
/* routine/ioctl: wancfg_write_vec() - SBE_IOC_WRITE_VEC */
struct sbecom_wrt_vec
{
u_int32_t reg;
u_int32_t data;
};
#define C1T3_CHIP_MSCC_32 0x01000000
#define C1T3_CHIP_TECT3_8 0x02000000
#define C1T3_CHIP_CPLD_8 0x03000000
#define C1T3_CHIP_EEPROM_8 0x04000000
#define W256T3_CHIP_MUSYCC_32 0x02000000
#define W256T3_CHIP_TEMUX_8 0x10000000
#define W256T3_CHIP_T8110_8 0x20000000
#define W256T3_CHIP_T8110_32 0x22000000
#define W256T3_CHIP_CPLD_8 0x30000000
#define W256T3_CHIP_EEPROM_8 0x40000000
/**********************************/
/** read write port parameters **/
/**********************************/
/* routine/ioctl: wancfg_getset_port_param() - SBE_IOC_PORT_GET */
/* routine/ioctl: wancfg_set_port_param() - SBE_IOC_PORT_SET */
/* NOTE: this structure supports hardware which supports individual per/port control */
struct sbecom_port_param
{
u_int8_t portnum;
u_int8_t port_mode; /* variations of T1 or E1 mode */
u_int8_t portStatus;
u_int8_t portP; /* more port parameters (clock source - 0x80;
* and LBO - 0xf; */
/* bits 0x70 are reserved for future use ) */
#ifdef SBE_PMCC4_ENABLE
u_int32_t hypersize; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */
#endif
int reserved[3-1]; /* reserved for future use */
int _res[4];
};
#define CFG_CLK_PORT_MASK 0x80 /* Loop timing */
#define CFG_CLK_PORT_INTERNAL 0x80 /* Loop timing */
#define CFG_CLK_PORT_EXTERNAL 0x00 /* Loop timing */
#define CFG_LBO_MASK 0x0F
#define CFG_LBO_unk 0 /* <not defined> */
#define CFG_LBO_LH0 1 /* T1 Long Haul (default) */
#define CFG_LBO_LH7_5 2 /* T1 Long Haul */
#define CFG_LBO_LH15 3 /* T1 Long Haul */
#define CFG_LBO_LH22_5 4 /* T1 Long Haul */
#define CFG_LBO_SH110 5 /* T1 Short Haul */
#define CFG_LBO_SH220 6 /* T1 Short Haul */
#define CFG_LBO_SH330 7 /* T1 Short Haul */
#define CFG_LBO_SH440 8 /* T1 Short Haul */
#define CFG_LBO_SH550 9 /* T1 Short Haul */
#define CFG_LBO_SH660 10 /* T1 Short Haul */
#define CFG_LBO_E75 11 /* E1 75 Ohm */
#define CFG_LBO_E120 12 /* E1 120 Ohm (default) */
/*************************************/
/** read write channel parameters **/
/*************************************/
/* routine/ioctl: wancfg_getset_chan_param() - SBE_IOC_CHAN_GET */
/* routine/ioctl: wancfg_set_chan_param() - SBE_IOC_CHAN_SET */
/* NOTE: this structure supports hardware which supports individual per/channel control */
struct sbecom_chan_param
{
u_int32_t channum; /* 0: */
#ifdef SBE_PMCC4_ENABLE
u_int32_t card; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */
u_int32_t port; /* RLD DEBUG - add this in until I learn how to make this entry obsolete */
u_int8_t bitmask[32];
#endif
u_int32_t intr_mask; /* 4: interrupt mask, specify ored
* (SS7_)INTR_* to disable */
u_int8_t status; /* 8: channel transceiver status (TX_ENABLED,
* RX_ENABLED) */
u_int8_t chan_mode; /* 9: protocol mode */
u_int8_t idlecode; /* A: idle code, in (FLAG_7E, FLAG_FF,
* FLAG_00) */
u_int8_t pad_fill_count; /* B: pad fill count (1-127), 0 - pad
* fill disabled */
u_int8_t data_inv; /* C: channel data inversion selection */
u_int8_t mode_56k; /* D: 56kbps mode */
u_int8_t reserved[2 + 8]; /* E: */
};
/* SS7 interrupt signals <intr_mask> */
#define SS7_INTR_SFILT 0x00000020
#define SS7_INTR_SDEC 0x00000040
#define SS7_INTR_SINC 0x00000080
#define SS7_INTR_SUERR 0x00000100
/* Other interrupts that can be masked */
#define INTR_BUFF 0x00000002
#define INTR_EOM 0x00000004
#define INTR_MSG 0x00000008
#define INTR_IDLE 0x00000010
/* transceiver status flags <status> */
#define TX_ENABLED 0x01
#define RX_ENABLED 0x02
/* Protocol modes <mode> */
#define CFG_CH_PROTO_TRANS 0
#define CFG_CH_PROTO_SS7 1
#define CFG_CH_PROTO_HDLC_FCS16 2
#define CFG_CH_PROTO_HDLC_FCS32 3
#define CFG_CH_PROTO_ISLP_MODE 4
/* Possible idle code assignments <idlecode> */
#define CFG_CH_FLAG_7E 0
#define CFG_CH_FLAG_FF 1
#define CFG_CH_FLAG_00 2
/* data inversion selection <data_inv> */
#define CFG_CH_DINV_NONE 0x00
#define CFG_CH_DINV_RX 0x01
#define CFG_CH_DINV_TX 0x02
/* Possible resettable chipsets/functions */
#define RESET_DEV_TEMUX 1
#define RESET_DEV_TECT3 RESET_DEV_TEMUX
#define RESET_DEV_PLL 2
/*********************************************/
/** read reset channel thruput statistics **/
/*********************************************/
/* routine/ioctl: wancfg_get_chan_stats() - SBE_IOC_CHAN_GET_STAT */
/* routine/ioctl: wancfg_del_chan_stats() - SBE_IOC_CHAN_DEL_STAT */
/* routine/ioctl: wancfg_get_card_chan_stats() - SBE_IOC_CARD_CHAN_STAT */
struct sbecom_chan_stats
{
unsigned long rx_packets; /* total packets received */
unsigned long tx_packets; /* total packets transmitted */
unsigned long rx_bytes; /* total bytes received */
unsigned long tx_bytes; /* total bytes transmitted */
unsigned long rx_errors;/* bad packets received */
unsigned long tx_errors;/* packet transmit problems */
unsigned long rx_dropped; /* no space in linux buffers */
unsigned long tx_dropped; /* no space available in linux */
/* detailed rx_errors: */
unsigned long rx_length_errors;
unsigned long rx_over_errors; /* receiver ring buff overflow */
unsigned long rx_crc_errors; /* recved pkt with crc error */
unsigned long rx_frame_errors; /* recv'd frame alignment error */
unsigned long rx_fifo_errors; /* recv'r fifo overrun */
unsigned long rx_missed_errors; /* receiver missed packet */
/* detailed tx_errors */
unsigned long tx_aborted_errors;
unsigned long tx_fifo_errors;
unsigned long tx_pending;
};
/****************************************/
/** read write card level parameters **/
/****************************************/
/* NOTE: this structure supports hardware which supports per/card control */
struct sbecom_card_param
{
u_int8_t framing_type; /* 0: CBP or M13 */
u_int8_t loopback; /* 1: one of LOOPBACK_* */
u_int8_t line_build_out; /* 2: boolean */
u_int8_t receive_eq; /* 3: boolean */
u_int8_t transmit_ones; /* 4: boolean */
u_int8_t clock; /* 5: 0 - internal, i>0 - external (recovered
* from framer i) */
u_int8_t h110enable; /* 6: */
u_int8_t disable_leds; /* 7: */
u_int8_t reserved1; /* 8: available - old 256t3 hypersized, but
* never used */
u_int8_t rear_io; /* 9: rear I/O off/on */
u_int8_t disable_tx; /* A: disable TX off/on */
u_int8_t mute_los; /* B: mute LOS off/on */
u_int8_t los_threshold; /* C: LOS threshold norm/low
* (default: norm) */
u_int8_t ds1_mode; /* D: DS1 mode T1/E1 (default: T1) */
u_int8_t ds3_unchan; /* E: DS3 unchannelized mode off/on */
u_int8_t reserved[1 + 16]; /* reserved for expansion - must be
* ZERO filled */
};
/* framing types <framing_type> */
#define FRAMING_M13 0
#define FRAMING_CBP 1
/* card level loopback options <loopback> */
#define CFG_CARD_LOOPBACK_NONE 0x00
#define CFG_CARD_LOOPBACK_DIAG 0x01
#define CFG_CARD_LOOPBACK_LINE 0x02
#define CFG_CARD_LOOPBACK_PAYLOAD 0x03
/* line level loopback options <loopback> */
#define CFG_LIU_LOOPBACK_NONE 0x00
#define CFG_LIU_LOOPBACK_ANALOG 0x10
#define CFG_LIU_LOOPBACK_DIGITAL 0x11
#define CFG_LIU_LOOPBACK_REMOTE 0x12
/* card level clock options <clock> */
#define CFG_CLK_INTERNAL 0x00
#define CFG_CLK_EXTERNAL 0x01
/* legacy 256T3 loopback values */
#define LOOPBACK_NONE 0
#define LOOPBACK_LIU_ANALOG 1
#define LOOPBACK_LIU_DIGITAL 2
#define LOOPBACK_FRAMER_DS3 3
#define LOOPBACK_FRAMER_T1 4
#define LOOPBACK_LIU_REMOTE 5
/* DS1 mode <ds1_mode> */
#define CFG_DS1_MODE_MASK 0x0f
#define CFG_DS1_MODE_T1 0x00
#define CFG_DS1_MODE_E1 0x01
#define CFG_DS1_MODE_CHANGE 0x80
/* DS3 unchannelized values <ds1_unchan> */
#define CFG_DS3_UNCHAN_MASK 0x01
#define CFG_DS3_UNCHAN_OFF 0x00
#define CFG_DS3_UNCHAN_ON 0x01
/************************************/
/** read write framer parameters **/
/************************************/
/* routine/ioctl: wancfg_get_framer() - SBE_IOC_FRAMER_GET */
/* routine/ioctl: wancfg_set_framer() - SBE_IOC_FRAMER_SET */
struct sbecom_framer_param
{
u_int8_t framer_num;
u_int8_t frame_type; /* SF, ESF, E1PLAIN, E1CAS, E1CRC, E1CRC+CAS */
u_int8_t loopback_type; /* DIGITAL, LINE, PAYLOAD */
u_int8_t auto_alarms;/* auto alarms */
u_int8_t reserved[12]; /* reserved for expansion - must be
* ZERO filled */
};
/* frame types <frame_type> */
#define CFG_FRAME_NONE 0
#define CFG_FRAME_SF 1 /* T1 B8ZS */
#define CFG_FRAME_ESF 2 /* T1 B8ZS */
#define CFG_FRAME_E1PLAIN 3 /* HDB3 w/o CAS,CRC */
#define CFG_FRAME_E1CAS 4 /* HDB3 */
#define CFG_FRAME_E1CRC 5 /* HDB3 */
#define CFG_FRAME_E1CRC_CAS 6 /* HDB3 */
#define CFG_FRAME_SF_AMI 7 /* T1 AMI */
#define CFG_FRAME_ESF_AMI 8 /* T1 AMI */
#define CFG_FRAME_E1PLAIN_AMI 9 /* E1 AMI w/o CAS,CRC */
#define CFG_FRAME_E1CAS_AMI 10 /* E1 AMI */
#define CFG_FRAME_E1CRC_AMI 11 /* E1 AMI */
#define CFG_FRAME_E1CRC_CAS_AMI 12 /* E1 AMI */
#define IS_FRAME_ANY_T1(field) \
(((field) == CFG_FRAME_NONE) || \
((field) == CFG_FRAME_SF) || \
((field) == CFG_FRAME_ESF) || \
((field) == CFG_FRAME_SF_AMI) || \
((field) == CFG_FRAME_ESF_AMI))
#define IS_FRAME_ANY_T1ESF(field) \
(((field) == CFG_FRAME_ESF) || \
((field) == CFG_FRAME_ESF_AMI))
#define IS_FRAME_ANY_E1(field) \
(((field) == CFG_FRAME_E1PLAIN) || \
((field) == CFG_FRAME_E1CAS) || \
((field) == CFG_FRAME_E1CRC) || \
((field) == CFG_FRAME_E1CRC_CAS) || \
((field) == CFG_FRAME_E1PLAIN_AMI) || \
((field) == CFG_FRAME_E1CAS_AMI) || \
((field) == CFG_FRAME_E1CRC_AMI) || \
((field) == CFG_FRAME_E1CRC_CAS_AMI))
#define IS_FRAME_ANY_AMI(field) \
(((field) == CFG_FRAME_SF_AMI) || \
((field) == CFG_FRAME_ESF_AMI) || \
((field) == CFG_FRAME_E1PLAIN_AMI) || \
((field) == CFG_FRAME_E1CAS_AMI) || \
((field) == CFG_FRAME_E1CRC_AMI) || \
((field) == CFG_FRAME_E1CRC_CAS_AMI))
/* frame level loopback options <loopback_type> */
#define CFG_FRMR_LOOPBACK_NONE 0
#define CFG_FRMR_LOOPBACK_DIAG 1
#define CFG_FRMR_LOOPBACK_LINE 2
#define CFG_FRMR_LOOPBACK_PAYLOAD 3
/****************************************/
/** read reset card error statistics **/
/****************************************/
/* routine/ioctl: wancfg_get_card_stats() - SBE_IOC_CARD_GET_STAT */
/* routine/ioctl: wancfg_del_card_stats() - SBE_IOC_CARD_DEL_STAT */
struct temux_card_stats
{
struct temux_stats
{
/* TEMUX DS3 PMON counters */
u_int32_t lcv;
u_int32_t err_framing;
u_int32_t febe;
u_int32_t err_cpbit;
u_int32_t err_parity;
/* TEMUX DS3 FRMR status */
u_int8_t los;
u_int8_t oof;
u_int8_t red;
u_int8_t yellow;
u_int8_t idle;
u_int8_t ais;
u_int8_t cbit;
/* TEMUX DS3 FEAC receiver */
u_int8_t feac;
u_int8_t feac_last;
} t;
u_int32_t tx_pending; /* total */
};
/**************************************************************/
struct wancfg
{
int cs, ds;
char *p;
};
typedef struct wancfg wcfg_t;
extern wcfg_t *wancfg_init (char *, char *);
extern int wancfg_card_blink (wcfg_t *, int);
extern int wancfg_ctl (wcfg_t *, int, void *, int, void *, int);
extern int wancfg_del_card_stats (wcfg_t *);
extern int wancfg_del_chan_stats (wcfg_t *, int);
extern int wancfg_enable_ports (wcfg_t *, int);
extern int wancfg_free (wcfg_t *);
extern int wancfg_get_brdaddr (wcfg_t *, struct sbe_brd_addr *);
extern int wancfg_get_brdinfo (wcfg_t *, struct sbe_brd_info *);
extern int wancfg_get_card (wcfg_t *, struct sbecom_card_param *);
extern int wancfg_get_card_chan_stats (wcfg_t *, struct sbecom_chan_stats *);
extern int wancfg_get_card_sn (wcfg_t *);
extern int wancfg_get_card_stats (wcfg_t *, struct temux_card_stats *);
extern int wancfg_get_chan (wcfg_t *, int, struct sbecom_chan_param *);
extern int wancfg_get_chan_stats (wcfg_t *, int, struct sbecom_chan_stats *);
extern int wancfg_get_drvinfo (wcfg_t *, int, struct sbe_drv_info *);
extern int wancfg_get_framer (wcfg_t *, int, struct sbecom_framer_param *);
extern int wancfg_get_iid (wcfg_t *, int, struct sbe_iid_info *);
extern int wancfg_get_sn (wcfg_t *, unsigned int *);
extern int wancfg_read (wcfg_t *, int, struct sbecom_wrt_vec *);
extern int wancfg_reset_device (wcfg_t *, int);
extern int wancfg_set_card (wcfg_t *, struct sbecom_card_param *);
extern int wancfg_set_chan (wcfg_t *, int, struct sbecom_chan_param *);
extern int wancfg_set_framer (wcfg_t *, int, struct sbecom_framer_param *);
extern int wancfg_set_loglevel (wcfg_t *, uint);
extern int wancfg_write (wcfg_t *, int, struct sbecom_wrt_vec *);
#ifdef NOT_YET_COMMON
extern int wancfg_get_tsioc (wcfg_t *, struct wanc1t3_ts_hdr *, struct wanc1t3_ts_param *);
extern int wancfg_set_tsioc (wcfg_t *, struct wanc1t3_ts_param *);
#endif
#endif /*** _INC_LIBSBEW_H_ ***/