| /* |
| * Disk Array driver for HP SA 5xxx and 6xxx Controllers |
| * Copyright 2000, 2005 Hewlett-Packard Development Company, L.P. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Questions/Comments/Bugfixes to iss_storagedev@hp.com |
| * |
| */ |
| |
| #include <linux/config.h> /* CONFIG_PROC_FS */ |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/major.h> |
| #include <linux/fs.h> |
| #include <linux/bio.h> |
| #include <linux/blkpg.h> |
| #include <linux/timer.h> |
| #include <linux/proc_fs.h> |
| #include <linux/init.h> |
| #include <linux/hdreg.h> |
| #include <linux/spinlock.h> |
| #include <linux/compat.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/blkdev.h> |
| #include <linux/genhd.h> |
| #include <linux/completion.h> |
| |
| #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) |
| #define DRIVER_NAME "HP CISS Driver (v 2.6.8)" |
| #define DRIVER_VERSION CCISS_DRIVER_VERSION(2,6,8) |
| |
| /* Embedded module documentation macros - see modules.h */ |
| MODULE_AUTHOR("Hewlett-Packard Company"); |
| MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 2.6.8"); |
| MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400" |
| " SA6i P600 P800 P400 P400i E200 E200i"); |
| MODULE_LICENSE("GPL"); |
| |
| #include "cciss_cmd.h" |
| #include "cciss.h" |
| #include <linux/cciss_ioctl.h> |
| |
| /* define the PCI info for the cards we can control */ |
| static const struct pci_device_id cciss_pci_device_id[] = { |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS, |
| 0x0E11, 0x4070, 0, 0, 0}, |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, |
| 0x0E11, 0x4080, 0, 0, 0}, |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, |
| 0x0E11, 0x4082, 0, 0, 0}, |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB, |
| 0x0E11, 0x4083, 0, 0, 0}, |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, |
| 0x0E11, 0x409A, 0, 0, 0}, |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, |
| 0x0E11, 0x409B, 0, 0, 0}, |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, |
| 0x0E11, 0x409C, 0, 0, 0}, |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, |
| 0x0E11, 0x409D, 0, 0, 0}, |
| { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC, |
| 0x0E11, 0x4091, 0, 0, 0}, |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSA, |
| 0x103C, 0x3225, 0, 0, 0}, |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, |
| 0x103c, 0x3223, 0, 0, 0}, |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, |
| 0x103c, 0x3234, 0, 0, 0}, |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, |
| 0x103c, 0x3235, 0, 0, 0}, |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, |
| 0x103c, 0x3211, 0, 0, 0}, |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, |
| 0x103c, 0x3212, 0, 0, 0}, |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, |
| 0x103c, 0x3213, 0, 0, 0}, |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, |
| 0x103c, 0x3214, 0, 0, 0}, |
| { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, |
| 0x103c, 0x3215, 0, 0, 0}, |
| {0,} |
| }; |
| MODULE_DEVICE_TABLE(pci, cciss_pci_device_id); |
| |
| #define NR_PRODUCTS (sizeof(products)/sizeof(struct board_type)) |
| |
| /* board_id = Subsystem Device ID & Vendor ID |
| * product = Marketing Name for the board |
| * access = Address of the struct of function pointers |
| */ |
| static struct board_type products[] = { |
| { 0x40700E11, "Smart Array 5300", &SA5_access }, |
| { 0x40800E11, "Smart Array 5i", &SA5B_access}, |
| { 0x40820E11, "Smart Array 532", &SA5B_access}, |
| { 0x40830E11, "Smart Array 5312", &SA5B_access}, |
| { 0x409A0E11, "Smart Array 641", &SA5_access}, |
| { 0x409B0E11, "Smart Array 642", &SA5_access}, |
| { 0x409C0E11, "Smart Array 6400", &SA5_access}, |
| { 0x409D0E11, "Smart Array 6400 EM", &SA5_access}, |
| { 0x40910E11, "Smart Array 6i", &SA5_access}, |
| { 0x3225103C, "Smart Array P600", &SA5_access}, |
| { 0x3223103C, "Smart Array P800", &SA5_access}, |
| { 0x3234103C, "Smart Array P400", &SA5_access}, |
| { 0x3235103C, "Smart Array P400i", &SA5_access}, |
| { 0x3211103C, "Smart Array E200i", &SA5_access}, |
| { 0x3212103C, "Smart Array E200", &SA5_access}, |
| { 0x3213103C, "Smart Array E200i", &SA5_access}, |
| { 0x3214103C, "Smart Array E200i", &SA5_access}, |
| { 0x3215103C, "Smart Array E200i", &SA5_access}, |
| }; |
| |
| /* How long to wait (in millesconds) for board to go into simple mode */ |
| #define MAX_CONFIG_WAIT 30000 |
| #define MAX_IOCTL_CONFIG_WAIT 1000 |
| |
| /*define how many times we will try a command because of bus resets */ |
| #define MAX_CMD_RETRIES 3 |
| |
| #define READ_AHEAD 1024 |
| #define NR_CMDS 384 /* #commands that can be outstanding */ |
| #define MAX_CTLR 32 |
| |
| /* Originally cciss driver only supports 8 major numbers */ |
| #define MAX_CTLR_ORIG 8 |
| |
| |
| static ctlr_info_t *hba[MAX_CTLR]; |
| |
| static void do_cciss_request(request_queue_t *q); |
| static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs); |
| static int cciss_open(struct inode *inode, struct file *filep); |
| static int cciss_release(struct inode *inode, struct file *filep); |
| static int cciss_ioctl(struct inode *inode, struct file *filep, |
| unsigned int cmd, unsigned long arg); |
| |
| static int revalidate_allvol(ctlr_info_t *host); |
| static int cciss_revalidate(struct gendisk *disk); |
| static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk); |
| static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, int clear_all); |
| |
| static void cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf, |
| int withirq, unsigned int *total_size, unsigned int *block_size); |
| static void cciss_geometry_inquiry(int ctlr, int logvol, |
| int withirq, unsigned int total_size, |
| unsigned int block_size, InquiryData_struct *inq_buff, |
| drive_info_struct *drv); |
| static void cciss_getgeometry(int cntl_num); |
| |
| static void start_io( ctlr_info_t *h); |
| static int sendcmd( __u8 cmd, int ctlr, void *buff, size_t size, |
| unsigned int use_unit_num, unsigned int log_unit, __u8 page_code, |
| unsigned char *scsi3addr, int cmd_type); |
| static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size, |
| unsigned int use_unit_num, unsigned int log_unit, __u8 page_code, |
| int cmd_type); |
| |
| static void fail_all_cmds(unsigned long ctlr); |
| |
| #ifdef CONFIG_PROC_FS |
| static int cciss_proc_get_info(char *buffer, char **start, off_t offset, |
| int length, int *eof, void *data); |
| static void cciss_procinit(int i); |
| #else |
| static void cciss_procinit(int i) {} |
| #endif /* CONFIG_PROC_FS */ |
| |
| #ifdef CONFIG_COMPAT |
| static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg); |
| #endif |
| |
| static struct block_device_operations cciss_fops = { |
| .owner = THIS_MODULE, |
| .open = cciss_open, |
| .release = cciss_release, |
| .ioctl = cciss_ioctl, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl = cciss_compat_ioctl, |
| #endif |
| .revalidate_disk= cciss_revalidate, |
| }; |
| |
| /* |
| * Enqueuing and dequeuing functions for cmdlists. |
| */ |
| static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c) |
| { |
| if (*Qptr == NULL) { |
| *Qptr = c; |
| c->next = c->prev = c; |
| } else { |
| c->prev = (*Qptr)->prev; |
| c->next = (*Qptr); |
| (*Qptr)->prev->next = c; |
| (*Qptr)->prev = c; |
| } |
| } |
| |
| static inline CommandList_struct *removeQ(CommandList_struct **Qptr, |
| CommandList_struct *c) |
| { |
| if (c && c->next != c) { |
| if (*Qptr == c) *Qptr = c->next; |
| c->prev->next = c->next; |
| c->next->prev = c->prev; |
| } else { |
| *Qptr = NULL; |
| } |
| return c; |
| } |
| |
| #include "cciss_scsi.c" /* For SCSI tape support */ |
| |
| #ifdef CONFIG_PROC_FS |
| |
| /* |
| * Report information about this controller. |
| */ |
| #define ENG_GIG 1000000000 |
| #define ENG_GIG_FACTOR (ENG_GIG/512) |
| #define RAID_UNKNOWN 6 |
| static const char *raid_label[] = {"0","4","1(1+0)","5","5+1","ADG", |
| "UNKNOWN"}; |
| |
| static struct proc_dir_entry *proc_cciss; |
| |
| static int cciss_proc_get_info(char *buffer, char **start, off_t offset, |
| int length, int *eof, void *data) |
| { |
| off_t pos = 0; |
| off_t len = 0; |
| int size, i, ctlr; |
| ctlr_info_t *h = (ctlr_info_t*)data; |
| drive_info_struct *drv; |
| unsigned long flags; |
| sector_t vol_sz, vol_sz_frac; |
| |
| ctlr = h->ctlr; |
| |
| /* prevent displaying bogus info during configuration |
| * or deconfiguration of a logical volume |
| */ |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| if (h->busy_configuring) { |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| return -EBUSY; |
| } |
| h->busy_configuring = 1; |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| |
| size = sprintf(buffer, "%s: HP %s Controller\n" |
| "Board ID: 0x%08lx\n" |
| "Firmware Version: %c%c%c%c\n" |
| "IRQ: %d\n" |
| "Logical drives: %d\n" |
| "Current Q depth: %d\n" |
| "Current # commands on controller: %d\n" |
| "Max Q depth since init: %d\n" |
| "Max # commands on controller since init: %d\n" |
| "Max SG entries since init: %d\n\n", |
| h->devname, |
| h->product_name, |
| (unsigned long)h->board_id, |
| h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], h->firm_ver[3], |
| (unsigned int)h->intr, |
| h->num_luns, |
| h->Qdepth, h->commands_outstanding, |
| h->maxQsinceinit, h->max_outstanding, h->maxSG); |
| |
| pos += size; len += size; |
| cciss_proc_tape_report(ctlr, buffer, &pos, &len); |
| for(i=0; i<=h->highest_lun; i++) { |
| |
| drv = &h->drv[i]; |
| if (drv->heads == 0) |
| continue; |
| |
| vol_sz = drv->nr_blocks; |
| vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR); |
| vol_sz_frac *= 100; |
| sector_div(vol_sz_frac, ENG_GIG_FACTOR); |
| |
| if (drv->raid_level > 5) |
| drv->raid_level = RAID_UNKNOWN; |
| size = sprintf(buffer+len, "cciss/c%dd%d:" |
| "\t%4u.%02uGB\tRAID %s\n", |
| ctlr, i, (int)vol_sz, (int)vol_sz_frac, |
| raid_label[drv->raid_level]); |
| pos += size; len += size; |
| } |
| |
| *eof = 1; |
| *start = buffer+offset; |
| len -= offset; |
| if (len>length) |
| len = length; |
| h->busy_configuring = 0; |
| return len; |
| } |
| |
| static int |
| cciss_proc_write(struct file *file, const char __user *buffer, |
| unsigned long count, void *data) |
| { |
| unsigned char cmd[80]; |
| int len; |
| #ifdef CONFIG_CISS_SCSI_TAPE |
| ctlr_info_t *h = (ctlr_info_t *) data; |
| int rc; |
| #endif |
| |
| if (count > sizeof(cmd)-1) return -EINVAL; |
| if (copy_from_user(cmd, buffer, count)) return -EFAULT; |
| cmd[count] = '\0'; |
| len = strlen(cmd); // above 3 lines ensure safety |
| if (len && cmd[len-1] == '\n') |
| cmd[--len] = '\0'; |
| # ifdef CONFIG_CISS_SCSI_TAPE |
| if (strcmp("engage scsi", cmd)==0) { |
| rc = cciss_engage_scsi(h->ctlr); |
| if (rc != 0) return -rc; |
| return count; |
| } |
| /* might be nice to have "disengage" too, but it's not |
| safely possible. (only 1 module use count, lock issues.) */ |
| # endif |
| return -EINVAL; |
| } |
| |
| /* |
| * Get us a file in /proc/cciss that says something about each controller. |
| * Create /proc/cciss if it doesn't exist yet. |
| */ |
| static void __devinit cciss_procinit(int i) |
| { |
| struct proc_dir_entry *pde; |
| |
| if (proc_cciss == NULL) { |
| proc_cciss = proc_mkdir("cciss", proc_root_driver); |
| if (!proc_cciss) |
| return; |
| } |
| |
| pde = create_proc_read_entry(hba[i]->devname, |
| S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH, |
| proc_cciss, cciss_proc_get_info, hba[i]); |
| pde->write_proc = cciss_proc_write; |
| } |
| #endif /* CONFIG_PROC_FS */ |
| |
| /* |
| * For operations that cannot sleep, a command block is allocated at init, |
| * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track |
| * which ones are free or in use. For operations that can wait for kmalloc |
| * to possible sleep, this routine can be called with get_from_pool set to 0. |
| * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was. |
| */ |
| static CommandList_struct * cmd_alloc(ctlr_info_t *h, int get_from_pool) |
| { |
| CommandList_struct *c; |
| int i; |
| u64bit temp64; |
| dma_addr_t cmd_dma_handle, err_dma_handle; |
| |
| if (!get_from_pool) |
| { |
| c = (CommandList_struct *) pci_alloc_consistent( |
| h->pdev, sizeof(CommandList_struct), &cmd_dma_handle); |
| if(c==NULL) |
| return NULL; |
| memset(c, 0, sizeof(CommandList_struct)); |
| |
| c->cmdindex = -1; |
| |
| c->err_info = (ErrorInfo_struct *)pci_alloc_consistent( |
| h->pdev, sizeof(ErrorInfo_struct), |
| &err_dma_handle); |
| |
| if (c->err_info == NULL) |
| { |
| pci_free_consistent(h->pdev, |
| sizeof(CommandList_struct), c, cmd_dma_handle); |
| return NULL; |
| } |
| memset(c->err_info, 0, sizeof(ErrorInfo_struct)); |
| } else /* get it out of the controllers pool */ |
| { |
| do { |
| i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS); |
| if (i == NR_CMDS) |
| return NULL; |
| } while(test_and_set_bit(i & (BITS_PER_LONG - 1), h->cmd_pool_bits+(i/BITS_PER_LONG)) != 0); |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss: using command buffer %d\n", i); |
| #endif |
| c = h->cmd_pool + i; |
| memset(c, 0, sizeof(CommandList_struct)); |
| cmd_dma_handle = h->cmd_pool_dhandle |
| + i*sizeof(CommandList_struct); |
| c->err_info = h->errinfo_pool + i; |
| memset(c->err_info, 0, sizeof(ErrorInfo_struct)); |
| err_dma_handle = h->errinfo_pool_dhandle |
| + i*sizeof(ErrorInfo_struct); |
| h->nr_allocs++; |
| |
| c->cmdindex = i; |
| } |
| |
| c->busaddr = (__u32) cmd_dma_handle; |
| temp64.val = (__u64) err_dma_handle; |
| c->ErrDesc.Addr.lower = temp64.val32.lower; |
| c->ErrDesc.Addr.upper = temp64.val32.upper; |
| c->ErrDesc.Len = sizeof(ErrorInfo_struct); |
| |
| c->ctlr = h->ctlr; |
| return c; |
| |
| |
| } |
| |
| /* |
| * Frees a command block that was previously allocated with cmd_alloc(). |
| */ |
| static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool) |
| { |
| int i; |
| u64bit temp64; |
| |
| if( !got_from_pool) |
| { |
| temp64.val32.lower = c->ErrDesc.Addr.lower; |
| temp64.val32.upper = c->ErrDesc.Addr.upper; |
| pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct), |
| c->err_info, (dma_addr_t) temp64.val); |
| pci_free_consistent(h->pdev, sizeof(CommandList_struct), |
| c, (dma_addr_t) c->busaddr); |
| } else |
| { |
| i = c - h->cmd_pool; |
| clear_bit(i&(BITS_PER_LONG-1), h->cmd_pool_bits+(i/BITS_PER_LONG)); |
| h->nr_frees++; |
| } |
| } |
| |
| static inline ctlr_info_t *get_host(struct gendisk *disk) |
| { |
| return disk->queue->queuedata; |
| } |
| |
| static inline drive_info_struct *get_drv(struct gendisk *disk) |
| { |
| return disk->private_data; |
| } |
| |
| /* |
| * Open. Make sure the device is really there. |
| */ |
| static int cciss_open(struct inode *inode, struct file *filep) |
| { |
| ctlr_info_t *host = get_host(inode->i_bdev->bd_disk); |
| drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk); |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name); |
| #endif /* CCISS_DEBUG */ |
| |
| if (host->busy_initializing || drv->busy_configuring) |
| return -EBUSY; |
| /* |
| * Root is allowed to open raw volume zero even if it's not configured |
| * so array config can still work. Root is also allowed to open any |
| * volume that has a LUN ID, so it can issue IOCTL to reread the |
| * disk information. I don't think I really like this |
| * but I'm already using way to many device nodes to claim another one |
| * for "raw controller". |
| */ |
| if (drv->nr_blocks == 0) { |
| if (iminor(inode) != 0) { /* not node 0? */ |
| /* if not node 0 make sure it is a partition = 0 */ |
| if (iminor(inode) & 0x0f) { |
| return -ENXIO; |
| /* if it is, make sure we have a LUN ID */ |
| } else if (drv->LunID == 0) { |
| return -ENXIO; |
| } |
| } |
| if (!capable(CAP_SYS_ADMIN)) |
| return -EPERM; |
| } |
| drv->usage_count++; |
| host->usage_count++; |
| return 0; |
| } |
| /* |
| * Close. Sync first. |
| */ |
| static int cciss_release(struct inode *inode, struct file *filep) |
| { |
| ctlr_info_t *host = get_host(inode->i_bdev->bd_disk); |
| drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk); |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss_release %s\n", inode->i_bdev->bd_disk->disk_name); |
| #endif /* CCISS_DEBUG */ |
| |
| drv->usage_count--; |
| host->usage_count--; |
| return 0; |
| } |
| |
| #ifdef CONFIG_COMPAT |
| |
| static int do_ioctl(struct file *f, unsigned cmd, unsigned long arg) |
| { |
| int ret; |
| lock_kernel(); |
| ret = cciss_ioctl(f->f_dentry->d_inode, f, cmd, arg); |
| unlock_kernel(); |
| return ret; |
| } |
| |
| static int cciss_ioctl32_passthru(struct file *f, unsigned cmd, unsigned long arg); |
| static int cciss_ioctl32_big_passthru(struct file *f, unsigned cmd, unsigned long arg); |
| |
| static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg) |
| { |
| switch (cmd) { |
| case CCISS_GETPCIINFO: |
| case CCISS_GETINTINFO: |
| case CCISS_SETINTINFO: |
| case CCISS_GETNODENAME: |
| case CCISS_SETNODENAME: |
| case CCISS_GETHEARTBEAT: |
| case CCISS_GETBUSTYPES: |
| case CCISS_GETFIRMVER: |
| case CCISS_GETDRIVVER: |
| case CCISS_REVALIDVOLS: |
| case CCISS_DEREGDISK: |
| case CCISS_REGNEWDISK: |
| case CCISS_REGNEWD: |
| case CCISS_RESCANDISK: |
| case CCISS_GETLUNINFO: |
| return do_ioctl(f, cmd, arg); |
| |
| case CCISS_PASSTHRU32: |
| return cciss_ioctl32_passthru(f, cmd, arg); |
| case CCISS_BIG_PASSTHRU32: |
| return cciss_ioctl32_big_passthru(f, cmd, arg); |
| |
| default: |
| return -ENOIOCTLCMD; |
| } |
| } |
| |
| static int cciss_ioctl32_passthru(struct file *f, unsigned cmd, unsigned long arg) |
| { |
| IOCTL32_Command_struct __user *arg32 = |
| (IOCTL32_Command_struct __user *) arg; |
| IOCTL_Command_struct arg64; |
| IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64)); |
| int err; |
| u32 cp; |
| |
| err = 0; |
| err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, sizeof(arg64.LUN_info)); |
| err |= copy_from_user(&arg64.Request, &arg32->Request, sizeof(arg64.Request)); |
| err |= copy_from_user(&arg64.error_info, &arg32->error_info, sizeof(arg64.error_info)); |
| err |= get_user(arg64.buf_size, &arg32->buf_size); |
| err |= get_user(cp, &arg32->buf); |
| arg64.buf = compat_ptr(cp); |
| err |= copy_to_user(p, &arg64, sizeof(arg64)); |
| |
| if (err) |
| return -EFAULT; |
| |
| err = do_ioctl(f, CCISS_PASSTHRU, (unsigned long) p); |
| if (err) |
| return err; |
| err |= copy_in_user(&arg32->error_info, &p->error_info, sizeof(arg32->error_info)); |
| if (err) |
| return -EFAULT; |
| return err; |
| } |
| |
| static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd, unsigned long arg) |
| { |
| BIG_IOCTL32_Command_struct __user *arg32 = |
| (BIG_IOCTL32_Command_struct __user *) arg; |
| BIG_IOCTL_Command_struct arg64; |
| BIG_IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64)); |
| int err; |
| u32 cp; |
| |
| err = 0; |
| err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, sizeof(arg64.LUN_info)); |
| err |= copy_from_user(&arg64.Request, &arg32->Request, sizeof(arg64.Request)); |
| err |= copy_from_user(&arg64.error_info, &arg32->error_info, sizeof(arg64.error_info)); |
| err |= get_user(arg64.buf_size, &arg32->buf_size); |
| err |= get_user(arg64.malloc_size, &arg32->malloc_size); |
| err |= get_user(cp, &arg32->buf); |
| arg64.buf = compat_ptr(cp); |
| err |= copy_to_user(p, &arg64, sizeof(arg64)); |
| |
| if (err) |
| return -EFAULT; |
| |
| err = do_ioctl(file, CCISS_BIG_PASSTHRU, (unsigned long) p); |
| if (err) |
| return err; |
| err |= copy_in_user(&arg32->error_info, &p->error_info, sizeof(arg32->error_info)); |
| if (err) |
| return -EFAULT; |
| return err; |
| } |
| #endif |
| /* |
| * ioctl |
| */ |
| static int cciss_ioctl(struct inode *inode, struct file *filep, |
| unsigned int cmd, unsigned long arg) |
| { |
| struct block_device *bdev = inode->i_bdev; |
| struct gendisk *disk = bdev->bd_disk; |
| ctlr_info_t *host = get_host(disk); |
| drive_info_struct *drv = get_drv(disk); |
| int ctlr = host->ctlr; |
| void __user *argp = (void __user *)arg; |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg); |
| #endif /* CCISS_DEBUG */ |
| |
| switch(cmd) { |
| case HDIO_GETGEO: |
| { |
| struct hd_geometry driver_geo; |
| if (drv->cylinders) { |
| driver_geo.heads = drv->heads; |
| driver_geo.sectors = drv->sectors; |
| driver_geo.cylinders = drv->cylinders; |
| } else |
| return -ENXIO; |
| driver_geo.start= get_start_sect(inode->i_bdev); |
| if (copy_to_user(argp, &driver_geo, sizeof(struct hd_geometry))) |
| return -EFAULT; |
| return(0); |
| } |
| |
| case CCISS_GETPCIINFO: |
| { |
| cciss_pci_info_struct pciinfo; |
| |
| if (!arg) return -EINVAL; |
| pciinfo.domain = pci_domain_nr(host->pdev->bus); |
| pciinfo.bus = host->pdev->bus->number; |
| pciinfo.dev_fn = host->pdev->devfn; |
| pciinfo.board_id = host->board_id; |
| if (copy_to_user(argp, &pciinfo, sizeof( cciss_pci_info_struct ))) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_GETINTINFO: |
| { |
| cciss_coalint_struct intinfo; |
| if (!arg) return -EINVAL; |
| intinfo.delay = readl(&host->cfgtable->HostWrite.CoalIntDelay); |
| intinfo.count = readl(&host->cfgtable->HostWrite.CoalIntCount); |
| if (copy_to_user(argp, &intinfo, sizeof( cciss_coalint_struct ))) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_SETINTINFO: |
| { |
| cciss_coalint_struct intinfo; |
| unsigned long flags; |
| int i; |
| |
| if (!arg) return -EINVAL; |
| if (!capable(CAP_SYS_ADMIN)) return -EPERM; |
| if (copy_from_user(&intinfo, argp, sizeof( cciss_coalint_struct))) |
| return -EFAULT; |
| if ( (intinfo.delay == 0 ) && (intinfo.count == 0)) |
| |
| { |
| // printk("cciss_ioctl: delay and count cannot be 0\n"); |
| return( -EINVAL); |
| } |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| /* Update the field, and then ring the doorbell */ |
| writel( intinfo.delay, |
| &(host->cfgtable->HostWrite.CoalIntDelay)); |
| writel( intinfo.count, |
| &(host->cfgtable->HostWrite.CoalIntCount)); |
| writel( CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL); |
| |
| for(i=0;i<MAX_IOCTL_CONFIG_WAIT;i++) { |
| if (!(readl(host->vaddr + SA5_DOORBELL) |
| & CFGTBL_ChangeReq)) |
| break; |
| /* delay and try again */ |
| udelay(1000); |
| } |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| if (i >= MAX_IOCTL_CONFIG_WAIT) |
| return -EAGAIN; |
| return(0); |
| } |
| case CCISS_GETNODENAME: |
| { |
| NodeName_type NodeName; |
| int i; |
| |
| if (!arg) return -EINVAL; |
| for(i=0;i<16;i++) |
| NodeName[i] = readb(&host->cfgtable->ServerName[i]); |
| if (copy_to_user(argp, NodeName, sizeof( NodeName_type))) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_SETNODENAME: |
| { |
| NodeName_type NodeName; |
| unsigned long flags; |
| int i; |
| |
| if (!arg) return -EINVAL; |
| if (!capable(CAP_SYS_ADMIN)) return -EPERM; |
| |
| if (copy_from_user(NodeName, argp, sizeof( NodeName_type))) |
| return -EFAULT; |
| |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| |
| /* Update the field, and then ring the doorbell */ |
| for(i=0;i<16;i++) |
| writeb( NodeName[i], &host->cfgtable->ServerName[i]); |
| |
| writel( CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL); |
| |
| for(i=0;i<MAX_IOCTL_CONFIG_WAIT;i++) { |
| if (!(readl(host->vaddr + SA5_DOORBELL) |
| & CFGTBL_ChangeReq)) |
| break; |
| /* delay and try again */ |
| udelay(1000); |
| } |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| if (i >= MAX_IOCTL_CONFIG_WAIT) |
| return -EAGAIN; |
| return(0); |
| } |
| |
| case CCISS_GETHEARTBEAT: |
| { |
| Heartbeat_type heartbeat; |
| |
| if (!arg) return -EINVAL; |
| heartbeat = readl(&host->cfgtable->HeartBeat); |
| if (copy_to_user(argp, &heartbeat, sizeof( Heartbeat_type))) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_GETBUSTYPES: |
| { |
| BusTypes_type BusTypes; |
| |
| if (!arg) return -EINVAL; |
| BusTypes = readl(&host->cfgtable->BusTypes); |
| if (copy_to_user(argp, &BusTypes, sizeof( BusTypes_type) )) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_GETFIRMVER: |
| { |
| FirmwareVer_type firmware; |
| |
| if (!arg) return -EINVAL; |
| memcpy(firmware, host->firm_ver, 4); |
| |
| if (copy_to_user(argp, firmware, sizeof( FirmwareVer_type))) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_GETDRIVVER: |
| { |
| DriverVer_type DriverVer = DRIVER_VERSION; |
| |
| if (!arg) return -EINVAL; |
| |
| if (copy_to_user(argp, &DriverVer, sizeof( DriverVer_type) )) |
| return -EFAULT; |
| return(0); |
| } |
| |
| case CCISS_REVALIDVOLS: |
| if (bdev != bdev->bd_contains || drv != host->drv) |
| return -ENXIO; |
| return revalidate_allvol(host); |
| |
| case CCISS_GETLUNINFO: { |
| LogvolInfo_struct luninfo; |
| |
| luninfo.LunID = drv->LunID; |
| luninfo.num_opens = drv->usage_count; |
| luninfo.num_parts = 0; |
| if (copy_to_user(argp, &luninfo, |
| sizeof(LogvolInfo_struct))) |
| return -EFAULT; |
| return(0); |
| } |
| case CCISS_DEREGDISK: |
| return rebuild_lun_table(host, disk); |
| |
| case CCISS_REGNEWD: |
| return rebuild_lun_table(host, NULL); |
| |
| case CCISS_PASSTHRU: |
| { |
| IOCTL_Command_struct iocommand; |
| CommandList_struct *c; |
| char *buff = NULL; |
| u64bit temp64; |
| unsigned long flags; |
| DECLARE_COMPLETION(wait); |
| |
| if (!arg) return -EINVAL; |
| |
| if (!capable(CAP_SYS_RAWIO)) return -EPERM; |
| |
| if (copy_from_user(&iocommand, argp, sizeof( IOCTL_Command_struct) )) |
| return -EFAULT; |
| if((iocommand.buf_size < 1) && |
| (iocommand.Request.Type.Direction != XFER_NONE)) |
| { |
| return -EINVAL; |
| } |
| #if 0 /* 'buf_size' member is 16-bits, and always smaller than kmalloc limit */ |
| /* Check kmalloc limits */ |
| if(iocommand.buf_size > 128000) |
| return -EINVAL; |
| #endif |
| if(iocommand.buf_size > 0) |
| { |
| buff = kmalloc(iocommand.buf_size, GFP_KERNEL); |
| if( buff == NULL) |
| return -EFAULT; |
| } |
| if (iocommand.Request.Type.Direction == XFER_WRITE) |
| { |
| /* Copy the data into the buffer we created */ |
| if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) |
| { |
| kfree(buff); |
| return -EFAULT; |
| } |
| } else { |
| memset(buff, 0, iocommand.buf_size); |
| } |
| if ((c = cmd_alloc(host , 0)) == NULL) |
| { |
| kfree(buff); |
| return -ENOMEM; |
| } |
| // Fill in the command type |
| c->cmd_type = CMD_IOCTL_PEND; |
| // Fill in Command Header |
| c->Header.ReplyQueue = 0; // unused in simple mode |
| if( iocommand.buf_size > 0) // buffer to fill |
| { |
| c->Header.SGList = 1; |
| c->Header.SGTotal= 1; |
| } else // no buffers to fill |
| { |
| c->Header.SGList = 0; |
| c->Header.SGTotal= 0; |
| } |
| c->Header.LUN = iocommand.LUN_info; |
| c->Header.Tag.lower = c->busaddr; // use the kernel address the cmd block for tag |
| |
| // Fill in Request block |
| c->Request = iocommand.Request; |
| |
| // Fill in the scatter gather information |
| if (iocommand.buf_size > 0 ) |
| { |
| temp64.val = pci_map_single( host->pdev, buff, |
| iocommand.buf_size, |
| PCI_DMA_BIDIRECTIONAL); |
| c->SG[0].Addr.lower = temp64.val32.lower; |
| c->SG[0].Addr.upper = temp64.val32.upper; |
| c->SG[0].Len = iocommand.buf_size; |
| c->SG[0].Ext = 0; // we are not chaining |
| } |
| c->waiting = &wait; |
| |
| /* Put the request on the tail of the request queue */ |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| addQ(&host->reqQ, c); |
| host->Qdepth++; |
| start_io(host); |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| |
| wait_for_completion(&wait); |
| |
| /* unlock the buffers from DMA */ |
| temp64.val32.lower = c->SG[0].Addr.lower; |
| temp64.val32.upper = c->SG[0].Addr.upper; |
| pci_unmap_single( host->pdev, (dma_addr_t) temp64.val, |
| iocommand.buf_size, PCI_DMA_BIDIRECTIONAL); |
| |
| /* Copy the error information out */ |
| iocommand.error_info = *(c->err_info); |
| if ( copy_to_user(argp, &iocommand, sizeof( IOCTL_Command_struct) ) ) |
| { |
| kfree(buff); |
| cmd_free(host, c, 0); |
| return( -EFAULT); |
| } |
| |
| if (iocommand.Request.Type.Direction == XFER_READ) |
| { |
| /* Copy the data out of the buffer we created */ |
| if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) |
| { |
| kfree(buff); |
| cmd_free(host, c, 0); |
| return -EFAULT; |
| } |
| } |
| kfree(buff); |
| cmd_free(host, c, 0); |
| return(0); |
| } |
| case CCISS_BIG_PASSTHRU: { |
| BIG_IOCTL_Command_struct *ioc; |
| CommandList_struct *c; |
| unsigned char **buff = NULL; |
| int *buff_size = NULL; |
| u64bit temp64; |
| unsigned long flags; |
| BYTE sg_used = 0; |
| int status = 0; |
| int i; |
| DECLARE_COMPLETION(wait); |
| __u32 left; |
| __u32 sz; |
| BYTE __user *data_ptr; |
| |
| if (!arg) |
| return -EINVAL; |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| ioc = (BIG_IOCTL_Command_struct *) |
| kmalloc(sizeof(*ioc), GFP_KERNEL); |
| if (!ioc) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| if (copy_from_user(ioc, argp, sizeof(*ioc))) { |
| status = -EFAULT; |
| goto cleanup1; |
| } |
| if ((ioc->buf_size < 1) && |
| (ioc->Request.Type.Direction != XFER_NONE)) { |
| status = -EINVAL; |
| goto cleanup1; |
| } |
| /* Check kmalloc limits using all SGs */ |
| if (ioc->malloc_size > MAX_KMALLOC_SIZE) { |
| status = -EINVAL; |
| goto cleanup1; |
| } |
| if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) { |
| status = -EINVAL; |
| goto cleanup1; |
| } |
| buff = (unsigned char **) kmalloc(MAXSGENTRIES * |
| sizeof(char *), GFP_KERNEL); |
| if (!buff) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| memset(buff, 0, MAXSGENTRIES); |
| buff_size = (int *) kmalloc(MAXSGENTRIES * sizeof(int), |
| GFP_KERNEL); |
| if (!buff_size) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| left = ioc->buf_size; |
| data_ptr = ioc->buf; |
| while (left) { |
| sz = (left > ioc->malloc_size) ? ioc->malloc_size : left; |
| buff_size[sg_used] = sz; |
| buff[sg_used] = kmalloc(sz, GFP_KERNEL); |
| if (buff[sg_used] == NULL) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| if (ioc->Request.Type.Direction == XFER_WRITE) { |
| if (copy_from_user(buff[sg_used], data_ptr, sz)) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| } else { |
| memset(buff[sg_used], 0, sz); |
| } |
| left -= sz; |
| data_ptr += sz; |
| sg_used++; |
| } |
| if ((c = cmd_alloc(host , 0)) == NULL) { |
| status = -ENOMEM; |
| goto cleanup1; |
| } |
| c->cmd_type = CMD_IOCTL_PEND; |
| c->Header.ReplyQueue = 0; |
| |
| if( ioc->buf_size > 0) { |
| c->Header.SGList = sg_used; |
| c->Header.SGTotal= sg_used; |
| } else { |
| c->Header.SGList = 0; |
| c->Header.SGTotal= 0; |
| } |
| c->Header.LUN = ioc->LUN_info; |
| c->Header.Tag.lower = c->busaddr; |
| |
| c->Request = ioc->Request; |
| if (ioc->buf_size > 0 ) { |
| int i; |
| for(i=0; i<sg_used; i++) { |
| temp64.val = pci_map_single( host->pdev, buff[i], |
| buff_size[i], |
| PCI_DMA_BIDIRECTIONAL); |
| c->SG[i].Addr.lower = temp64.val32.lower; |
| c->SG[i].Addr.upper = temp64.val32.upper; |
| c->SG[i].Len = buff_size[i]; |
| c->SG[i].Ext = 0; /* we are not chaining */ |
| } |
| } |
| c->waiting = &wait; |
| /* Put the request on the tail of the request queue */ |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| addQ(&host->reqQ, c); |
| host->Qdepth++; |
| start_io(host); |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| wait_for_completion(&wait); |
| /* unlock the buffers from DMA */ |
| for(i=0; i<sg_used; i++) { |
| temp64.val32.lower = c->SG[i].Addr.lower; |
| temp64.val32.upper = c->SG[i].Addr.upper; |
| pci_unmap_single( host->pdev, (dma_addr_t) temp64.val, |
| buff_size[i], PCI_DMA_BIDIRECTIONAL); |
| } |
| /* Copy the error information out */ |
| ioc->error_info = *(c->err_info); |
| if (copy_to_user(argp, ioc, sizeof(*ioc))) { |
| cmd_free(host, c, 0); |
| status = -EFAULT; |
| goto cleanup1; |
| } |
| if (ioc->Request.Type.Direction == XFER_READ) { |
| /* Copy the data out of the buffer we created */ |
| BYTE __user *ptr = ioc->buf; |
| for(i=0; i< sg_used; i++) { |
| if (copy_to_user(ptr, buff[i], buff_size[i])) { |
| cmd_free(host, c, 0); |
| status = -EFAULT; |
| goto cleanup1; |
| } |
| ptr += buff_size[i]; |
| } |
| } |
| cmd_free(host, c, 0); |
| status = 0; |
| cleanup1: |
| if (buff) { |
| for(i=0; i<sg_used; i++) |
| kfree(buff[i]); |
| kfree(buff); |
| } |
| kfree(buff_size); |
| kfree(ioc); |
| return(status); |
| } |
| default: |
| return -ENOTTY; |
| } |
| |
| } |
| |
| /* |
| * revalidate_allvol is for online array config utilities. After a |
| * utility reconfigures the drives in the array, it can use this function |
| * (through an ioctl) to make the driver zap any previous disk structs for |
| * that controller and get new ones. |
| * |
| * Right now I'm using the getgeometry() function to do this, but this |
| * function should probably be finer grained and allow you to revalidate one |
| * particualar logical volume (instead of all of them on a particular |
| * controller). |
| */ |
| static int revalidate_allvol(ctlr_info_t *host) |
| { |
| int ctlr = host->ctlr, i; |
| unsigned long flags; |
| |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| if (host->usage_count > 1) { |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| printk(KERN_WARNING "cciss: Device busy for volume" |
| " revalidation (usage=%d)\n", host->usage_count); |
| return -EBUSY; |
| } |
| host->usage_count++; |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| |
| for(i=0; i< NWD; i++) { |
| struct gendisk *disk = host->gendisk[i]; |
| if (disk) { |
| request_queue_t *q = disk->queue; |
| |
| if (disk->flags & GENHD_FL_UP) |
| del_gendisk(disk); |
| if (q) |
| blk_cleanup_queue(q); |
| put_disk(disk); |
| } |
| } |
| |
| /* |
| * Set the partition and block size structures for all volumes |
| * on this controller to zero. We will reread all of this data |
| */ |
| memset(host->drv, 0, sizeof(drive_info_struct) |
| * CISS_MAX_LUN); |
| /* |
| * Tell the array controller not to give us any interrupts while |
| * we check the new geometry. Then turn interrupts back on when |
| * we're done. |
| */ |
| host->access.set_intr_mask(host, CCISS_INTR_OFF); |
| cciss_getgeometry(ctlr); |
| host->access.set_intr_mask(host, CCISS_INTR_ON); |
| |
| /* Loop through each real device */ |
| for (i = 0; i < NWD; i++) { |
| struct gendisk *disk = host->gendisk[i]; |
| drive_info_struct *drv = &(host->drv[i]); |
| /* we must register the controller even if no disks exist */ |
| /* this is for the online array utilities */ |
| if (!drv->heads && i) |
| continue; |
| blk_queue_hardsect_size(drv->queue, drv->block_size); |
| set_capacity(disk, drv->nr_blocks); |
| add_disk(disk); |
| } |
| host->usage_count--; |
| return 0; |
| } |
| |
| /* This function will check the usage_count of the drive to be updated/added. |
| * If the usage_count is zero then the drive information will be updated and |
| * the disk will be re-registered with the kernel. If not then it will be |
| * left alone for the next reboot. The exception to this is disk 0 which |
| * will always be left registered with the kernel since it is also the |
| * controller node. Any changes to disk 0 will show up on the next |
| * reboot. |
| */ |
| static void cciss_update_drive_info(int ctlr, int drv_index) |
| { |
| ctlr_info_t *h = hba[ctlr]; |
| struct gendisk *disk; |
| ReadCapdata_struct *size_buff = NULL; |
| InquiryData_struct *inq_buff = NULL; |
| unsigned int block_size; |
| unsigned int total_size; |
| unsigned long flags = 0; |
| int ret = 0; |
| |
| /* if the disk already exists then deregister it before proceeding*/ |
| if (h->drv[drv_index].raid_level != -1){ |
| spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); |
| h->drv[drv_index].busy_configuring = 1; |
| spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); |
| ret = deregister_disk(h->gendisk[drv_index], |
| &h->drv[drv_index], 0); |
| h->drv[drv_index].busy_configuring = 0; |
| } |
| |
| /* If the disk is in use return */ |
| if (ret) |
| return; |
| |
| |
| /* Get information about the disk and modify the driver sturcture */ |
| size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL); |
| if (size_buff == NULL) |
| goto mem_msg; |
| inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL); |
| if (inq_buff == NULL) |
| goto mem_msg; |
| |
| cciss_read_capacity(ctlr, drv_index, size_buff, 1, |
| &total_size, &block_size); |
| cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size, |
| inq_buff, &h->drv[drv_index]); |
| |
| ++h->num_luns; |
| disk = h->gendisk[drv_index]; |
| set_capacity(disk, h->drv[drv_index].nr_blocks); |
| |
| |
| /* if it's the controller it's already added */ |
| if (drv_index){ |
| disk->queue = blk_init_queue(do_cciss_request, &h->lock); |
| |
| /* Set up queue information */ |
| disk->queue->backing_dev_info.ra_pages = READ_AHEAD; |
| blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask); |
| |
| /* This is a hardware imposed limit. */ |
| blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES); |
| |
| /* This is a limit in the driver and could be eliminated. */ |
| blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES); |
| |
| blk_queue_max_sectors(disk->queue, 512); |
| |
| disk->queue->queuedata = hba[ctlr]; |
| |
| blk_queue_hardsect_size(disk->queue, |
| hba[ctlr]->drv[drv_index].block_size); |
| |
| h->drv[drv_index].queue = disk->queue; |
| add_disk(disk); |
| } |
| |
| freeret: |
| kfree(size_buff); |
| kfree(inq_buff); |
| return; |
| mem_msg: |
| printk(KERN_ERR "cciss: out of memory\n"); |
| goto freeret; |
| } |
| |
| /* This function will find the first index of the controllers drive array |
| * that has a -1 for the raid_level and will return that index. This is |
| * where new drives will be added. If the index to be returned is greater |
| * than the highest_lun index for the controller then highest_lun is set |
| * to this new index. If there are no available indexes then -1 is returned. |
| */ |
| static int cciss_find_free_drive_index(int ctlr) |
| { |
| int i; |
| |
| for (i=0; i < CISS_MAX_LUN; i++){ |
| if (hba[ctlr]->drv[i].raid_level == -1){ |
| if (i > hba[ctlr]->highest_lun) |
| hba[ctlr]->highest_lun = i; |
| return i; |
| } |
| } |
| return -1; |
| } |
| |
| /* This function will add and remove logical drives from the Logical |
| * drive array of the controller and maintain persistancy of ordering |
| * so that mount points are preserved until the next reboot. This allows |
| * for the removal of logical drives in the middle of the drive array |
| * without a re-ordering of those drives. |
| * INPUT |
| * h = The controller to perform the operations on |
| * del_disk = The disk to remove if specified. If the value given |
| * is NULL then no disk is removed. |
| */ |
| static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk) |
| { |
| int ctlr = h->ctlr; |
| int num_luns; |
| ReportLunData_struct *ld_buff = NULL; |
| drive_info_struct *drv = NULL; |
| int return_code; |
| int listlength = 0; |
| int i; |
| int drv_found; |
| int drv_index = 0; |
| __u32 lunid = 0; |
| unsigned long flags; |
| |
| /* Set busy_configuring flag for this operation */ |
| spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); |
| if (h->num_luns >= CISS_MAX_LUN){ |
| spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); |
| return -EINVAL; |
| } |
| |
| if (h->busy_configuring){ |
| spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); |
| return -EBUSY; |
| } |
| h->busy_configuring = 1; |
| |
| /* if del_disk is NULL then we are being called to add a new disk |
| * and update the logical drive table. If it is not NULL then |
| * we will check if the disk is in use or not. |
| */ |
| if (del_disk != NULL){ |
| drv = get_drv(del_disk); |
| drv->busy_configuring = 1; |
| spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); |
| return_code = deregister_disk(del_disk, drv, 1); |
| drv->busy_configuring = 0; |
| h->busy_configuring = 0; |
| return return_code; |
| } else { |
| spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| |
| ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL); |
| if (ld_buff == NULL) |
| goto mem_msg; |
| |
| return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff, |
| sizeof(ReportLunData_struct), 0, 0, 0, |
| TYPE_CMD); |
| |
| if (return_code == IO_OK){ |
| listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24; |
| listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16; |
| listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8; |
| listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]); |
| } else{ /* reading number of logical volumes failed */ |
| printk(KERN_WARNING "cciss: report logical volume" |
| " command failed\n"); |
| listlength = 0; |
| goto freeret; |
| } |
| |
| num_luns = listlength / 8; /* 8 bytes per entry */ |
| if (num_luns > CISS_MAX_LUN){ |
| num_luns = CISS_MAX_LUN; |
| printk(KERN_WARNING "cciss: more luns configured" |
| " on controller than can be handled by" |
| " this driver.\n"); |
| } |
| |
| /* Compare controller drive array to drivers drive array. |
| * Check for updates in the drive information and any new drives |
| * on the controller. |
| */ |
| for (i=0; i < num_luns; i++){ |
| int j; |
| |
| drv_found = 0; |
| |
| lunid = (0xff & |
| (unsigned int)(ld_buff->LUN[i][3])) << 24; |
| lunid |= (0xff & |
| (unsigned int)(ld_buff->LUN[i][2])) << 16; |
| lunid |= (0xff & |
| (unsigned int)(ld_buff->LUN[i][1])) << 8; |
| lunid |= 0xff & |
| (unsigned int)(ld_buff->LUN[i][0]); |
| |
| /* Find if the LUN is already in the drive array |
| * of the controller. If so then update its info |
| * if not is use. If it does not exist then find |
| * the first free index and add it. |
| */ |
| for (j=0; j <= h->highest_lun; j++){ |
| if (h->drv[j].LunID == lunid){ |
| drv_index = j; |
| drv_found = 1; |
| } |
| } |
| |
| /* check if the drive was found already in the array */ |
| if (!drv_found){ |
| drv_index = cciss_find_free_drive_index(ctlr); |
| if (drv_index == -1) |
| goto freeret; |
| |
| } |
| h->drv[drv_index].LunID = lunid; |
| cciss_update_drive_info(ctlr, drv_index); |
| } /* end for */ |
| } /* end else */ |
| |
| freeret: |
| kfree(ld_buff); |
| h->busy_configuring = 0; |
| /* We return -1 here to tell the ACU that we have registered/updated |
| * all of the drives that we can and to keep it from calling us |
| * additional times. |
| */ |
| return -1; |
| mem_msg: |
| printk(KERN_ERR "cciss: out of memory\n"); |
| goto freeret; |
| } |
| |
| /* This function will deregister the disk and it's queue from the |
| * kernel. It must be called with the controller lock held and the |
| * drv structures busy_configuring flag set. It's parameters are: |
| * |
| * disk = This is the disk to be deregistered |
| * drv = This is the drive_info_struct associated with the disk to be |
| * deregistered. It contains information about the disk used |
| * by the driver. |
| * clear_all = This flag determines whether or not the disk information |
| * is going to be completely cleared out and the highest_lun |
| * reset. Sometimes we want to clear out information about |
| * the disk in preperation for re-adding it. In this case |
| * the highest_lun should be left unchanged and the LunID |
| * should not be cleared. |
| */ |
| static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, |
| int clear_all) |
| { |
| ctlr_info_t *h = get_host(disk); |
| |
| if (!capable(CAP_SYS_RAWIO)) |
| return -EPERM; |
| |
| /* make sure logical volume is NOT is use */ |
| if(clear_all || (h->gendisk[0] == disk)) { |
| if (drv->usage_count > 1) |
| return -EBUSY; |
| } |
| else |
| if( drv->usage_count > 0 ) |
| return -EBUSY; |
| |
| /* invalidate the devices and deregister the disk. If it is disk |
| * zero do not deregister it but just zero out it's values. This |
| * allows us to delete disk zero but keep the controller registered. |
| */ |
| if (h->gendisk[0] != disk){ |
| if (disk) { |
| request_queue_t *q = disk->queue; |
| if (disk->flags & GENHD_FL_UP) |
| del_gendisk(disk); |
| if (q) |
| blk_cleanup_queue(q); |
| put_disk(disk); |
| } |
| } |
| |
| --h->num_luns; |
| /* zero out the disk size info */ |
| drv->nr_blocks = 0; |
| drv->block_size = 0; |
| drv->heads = 0; |
| drv->sectors = 0; |
| drv->cylinders = 0; |
| drv->raid_level = -1; /* This can be used as a flag variable to |
| * indicate that this element of the drive |
| * array is free. |
| */ |
| |
| if (clear_all){ |
| /* check to see if it was the last disk */ |
| if (drv == h->drv + h->highest_lun) { |
| /* if so, find the new hightest lun */ |
| int i, newhighest =-1; |
| for(i=0; i<h->highest_lun; i++) { |
| /* if the disk has size > 0, it is available */ |
| if (h->drv[i].heads) |
| newhighest = i; |
| } |
| h->highest_lun = newhighest; |
| } |
| |
| drv->LunID = 0; |
| } |
| return(0); |
| } |
| |
| static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff, |
| size_t size, |
| unsigned int use_unit_num, /* 0: address the controller, |
| 1: address logical volume log_unit, |
| 2: periph device address is scsi3addr */ |
| unsigned int log_unit, __u8 page_code, unsigned char *scsi3addr, |
| int cmd_type) |
| { |
| ctlr_info_t *h= hba[ctlr]; |
| u64bit buff_dma_handle; |
| int status = IO_OK; |
| |
| c->cmd_type = CMD_IOCTL_PEND; |
| c->Header.ReplyQueue = 0; |
| if( buff != NULL) { |
| c->Header.SGList = 1; |
| c->Header.SGTotal= 1; |
| } else { |
| c->Header.SGList = 0; |
| c->Header.SGTotal= 0; |
| } |
| c->Header.Tag.lower = c->busaddr; |
| |
| c->Request.Type.Type = cmd_type; |
| if (cmd_type == TYPE_CMD) { |
| switch(cmd) { |
| case CISS_INQUIRY: |
| /* If the logical unit number is 0 then, this is going |
| to controller so It's a physical command |
| mode = 0 target = 0. So we have nothing to write. |
| otherwise, if use_unit_num == 1, |
| mode = 1(volume set addressing) target = LUNID |
| otherwise, if use_unit_num == 2, |
| mode = 0(periph dev addr) target = scsi3addr */ |
| if (use_unit_num == 1) { |
| c->Header.LUN.LogDev.VolId= |
| h->drv[log_unit].LunID; |
| c->Header.LUN.LogDev.Mode = 1; |
| } else if (use_unit_num == 2) { |
| memcpy(c->Header.LUN.LunAddrBytes,scsi3addr,8); |
| c->Header.LUN.LogDev.Mode = 0; |
| } |
| /* are we trying to read a vital product page */ |
| if(page_code != 0) { |
| c->Request.CDB[1] = 0x01; |
| c->Request.CDB[2] = page_code; |
| } |
| c->Request.CDBLen = 6; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_READ; |
| c->Request.Timeout = 0; |
| c->Request.CDB[0] = CISS_INQUIRY; |
| c->Request.CDB[4] = size & 0xFF; |
| break; |
| case CISS_REPORT_LOG: |
| case CISS_REPORT_PHYS: |
| /* Talking to controller so It's a physical command |
| mode = 00 target = 0. Nothing to write. |
| */ |
| c->Request.CDBLen = 12; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_READ; |
| c->Request.Timeout = 0; |
| c->Request.CDB[0] = cmd; |
| c->Request.CDB[6] = (size >> 24) & 0xFF; //MSB |
| c->Request.CDB[7] = (size >> 16) & 0xFF; |
| c->Request.CDB[8] = (size >> 8) & 0xFF; |
| c->Request.CDB[9] = size & 0xFF; |
| break; |
| |
| case CCISS_READ_CAPACITY: |
| c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID; |
| c->Header.LUN.LogDev.Mode = 1; |
| c->Request.CDBLen = 10; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_READ; |
| c->Request.Timeout = 0; |
| c->Request.CDB[0] = cmd; |
| break; |
| case CCISS_CACHE_FLUSH: |
| c->Request.CDBLen = 12; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_WRITE; |
| c->Request.Timeout = 0; |
| c->Request.CDB[0] = BMIC_WRITE; |
| c->Request.CDB[6] = BMIC_CACHE_FLUSH; |
| break; |
| default: |
| printk(KERN_WARNING |
| "cciss%d: Unknown Command 0x%c\n", ctlr, cmd); |
| return(IO_ERROR); |
| } |
| } else if (cmd_type == TYPE_MSG) { |
| switch (cmd) { |
| case 0: /* ABORT message */ |
| c->Request.CDBLen = 12; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_WRITE; |
| c->Request.Timeout = 0; |
| c->Request.CDB[0] = cmd; /* abort */ |
| c->Request.CDB[1] = 0; /* abort a command */ |
| /* buff contains the tag of the command to abort */ |
| memcpy(&c->Request.CDB[4], buff, 8); |
| break; |
| case 1: /* RESET message */ |
| c->Request.CDBLen = 12; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_WRITE; |
| c->Request.Timeout = 0; |
| memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB)); |
| c->Request.CDB[0] = cmd; /* reset */ |
| c->Request.CDB[1] = 0x04; /* reset a LUN */ |
| case 3: /* No-Op message */ |
| c->Request.CDBLen = 1; |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = XFER_WRITE; |
| c->Request.Timeout = 0; |
| c->Request.CDB[0] = cmd; |
| break; |
| default: |
| printk(KERN_WARNING |
| "cciss%d: unknown message type %d\n", |
| ctlr, cmd); |
| return IO_ERROR; |
| } |
| } else { |
| printk(KERN_WARNING |
| "cciss%d: unknown command type %d\n", ctlr, cmd_type); |
| return IO_ERROR; |
| } |
| /* Fill in the scatter gather information */ |
| if (size > 0) { |
| buff_dma_handle.val = (__u64) pci_map_single(h->pdev, |
| buff, size, PCI_DMA_BIDIRECTIONAL); |
| c->SG[0].Addr.lower = buff_dma_handle.val32.lower; |
| c->SG[0].Addr.upper = buff_dma_handle.val32.upper; |
| c->SG[0].Len = size; |
| c->SG[0].Ext = 0; /* we are not chaining */ |
| } |
| return status; |
| } |
| static int sendcmd_withirq(__u8 cmd, |
| int ctlr, |
| void *buff, |
| size_t size, |
| unsigned int use_unit_num, |
| unsigned int log_unit, |
| __u8 page_code, |
| int cmd_type) |
| { |
| ctlr_info_t *h = hba[ctlr]; |
| CommandList_struct *c; |
| u64bit buff_dma_handle; |
| unsigned long flags; |
| int return_status; |
| DECLARE_COMPLETION(wait); |
| |
| if ((c = cmd_alloc(h , 0)) == NULL) |
| return -ENOMEM; |
| return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, |
| log_unit, page_code, NULL, cmd_type); |
| if (return_status != IO_OK) { |
| cmd_free(h, c, 0); |
| return return_status; |
| } |
| resend_cmd2: |
| c->waiting = &wait; |
| |
| /* Put the request on the tail of the queue and send it */ |
| spin_lock_irqsave(CCISS_LOCK(ctlr), flags); |
| addQ(&h->reqQ, c); |
| h->Qdepth++; |
| start_io(h); |
| spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags); |
| |
| wait_for_completion(&wait); |
| |
| if(c->err_info->CommandStatus != 0) |
| { /* an error has occurred */ |
| switch(c->err_info->CommandStatus) |
| { |
| case CMD_TARGET_STATUS: |
| printk(KERN_WARNING "cciss: cmd %p has " |
| " completed with errors\n", c); |
| if( c->err_info->ScsiStatus) |
| { |
| printk(KERN_WARNING "cciss: cmd %p " |
| "has SCSI Status = %x\n", |
| c, |
| c->err_info->ScsiStatus); |
| } |
| |
| break; |
| case CMD_DATA_UNDERRUN: |
| case CMD_DATA_OVERRUN: |
| /* expected for inquire and report lun commands */ |
| break; |
| case CMD_INVALID: |
| printk(KERN_WARNING "cciss: Cmd %p is " |
| "reported invalid\n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_PROTOCOL_ERR: |
| printk(KERN_WARNING "cciss: cmd %p has " |
| "protocol error \n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_HARDWARE_ERR: |
| printk(KERN_WARNING "cciss: cmd %p had " |
| " hardware error\n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_CONNECTION_LOST: |
| printk(KERN_WARNING "cciss: cmd %p had " |
| "connection lost\n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_ABORTED: |
| printk(KERN_WARNING "cciss: cmd %p was " |
| "aborted\n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_ABORT_FAILED: |
| printk(KERN_WARNING "cciss: cmd %p reports " |
| "abort failed\n", c); |
| return_status = IO_ERROR; |
| break; |
| case CMD_UNSOLICITED_ABORT: |
| printk(KERN_WARNING |
| "cciss%d: unsolicited abort %p\n", |
| ctlr, c); |
| if (c->retry_count < MAX_CMD_RETRIES) { |
| printk(KERN_WARNING |
| "cciss%d: retrying %p\n", |
| ctlr, c); |
| c->retry_count++; |
| /* erase the old error information */ |
| memset(c->err_info, 0, |
| sizeof(ErrorInfo_struct)); |
| return_status = IO_OK; |
| INIT_COMPLETION(wait); |
| goto resend_cmd2; |
| } |
| return_status = IO_ERROR; |
| break; |
| default: |
| printk(KERN_WARNING "cciss: cmd %p returned " |
| "unknown status %x\n", c, |
| c->err_info->CommandStatus); |
| return_status = IO_ERROR; |
| } |
| } |
| /* unlock the buffers from DMA */ |
| buff_dma_handle.val32.lower = c->SG[0].Addr.lower; |
| buff_dma_handle.val32.upper = c->SG[0].Addr.upper; |
| pci_unmap_single( h->pdev, (dma_addr_t) buff_dma_handle.val, |
| c->SG[0].Len, PCI_DMA_BIDIRECTIONAL); |
| cmd_free(h, c, 0); |
| return(return_status); |
| |
| } |
| static void cciss_geometry_inquiry(int ctlr, int logvol, |
| int withirq, unsigned int total_size, |
| unsigned int block_size, InquiryData_struct *inq_buff, |
| drive_info_struct *drv) |
| { |
| int return_code; |
| memset(inq_buff, 0, sizeof(InquiryData_struct)); |
| if (withirq) |
| return_code = sendcmd_withirq(CISS_INQUIRY, ctlr, |
| inq_buff, sizeof(*inq_buff), 1, logvol ,0xC1, TYPE_CMD); |
| else |
| return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff, |
| sizeof(*inq_buff), 1, logvol ,0xC1, NULL, TYPE_CMD); |
| if (return_code == IO_OK) { |
| if(inq_buff->data_byte[8] == 0xFF) { |
| printk(KERN_WARNING |
| "cciss: reading geometry failed, volume " |
| "does not support reading geometry\n"); |
| drv->block_size = block_size; |
| drv->nr_blocks = total_size; |
| drv->heads = 255; |
| drv->sectors = 32; // Sectors per track |
| drv->cylinders = total_size / 255 / 32; |
| } else { |
| unsigned int t; |
| |
| drv->block_size = block_size; |
| drv->nr_blocks = total_size; |
| drv->heads = inq_buff->data_byte[6]; |
| drv->sectors = inq_buff->data_byte[7]; |
| drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8; |
| drv->cylinders += inq_buff->data_byte[5]; |
| drv->raid_level = inq_buff->data_byte[8]; |
| t = drv->heads * drv->sectors; |
| if (t > 1) { |
| drv->cylinders = total_size/t; |
| } |
| } |
| } else { /* Get geometry failed */ |
| printk(KERN_WARNING "cciss: reading geometry failed\n"); |
| } |
| printk(KERN_INFO " heads= %d, sectors= %d, cylinders= %d\n\n", |
| drv->heads, drv->sectors, drv->cylinders); |
| } |
| static void |
| cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf, |
| int withirq, unsigned int *total_size, unsigned int *block_size) |
| { |
| int return_code; |
| memset(buf, 0, sizeof(*buf)); |
| if (withirq) |
| return_code = sendcmd_withirq(CCISS_READ_CAPACITY, |
| ctlr, buf, sizeof(*buf), 1, logvol, 0, TYPE_CMD); |
| else |
| return_code = sendcmd(CCISS_READ_CAPACITY, |
| ctlr, buf, sizeof(*buf), 1, logvol, 0, NULL, TYPE_CMD); |
| if (return_code == IO_OK) { |
| *total_size = be32_to_cpu(*((__be32 *) &buf->total_size[0]))+1; |
| *block_size = be32_to_cpu(*((__be32 *) &buf->block_size[0])); |
| } else { /* read capacity command failed */ |
| printk(KERN_WARNING "cciss: read capacity failed\n"); |
| *total_size = 0; |
| *block_size = BLOCK_SIZE; |
| } |
| printk(KERN_INFO " blocks= %u block_size= %d\n", |
| *total_size, *block_size); |
| return; |
| } |
| |
| static int cciss_revalidate(struct gendisk *disk) |
| { |
| ctlr_info_t *h = get_host(disk); |
| drive_info_struct *drv = get_drv(disk); |
| int logvol; |
| int FOUND=0; |
| unsigned int block_size; |
| unsigned int total_size; |
| ReadCapdata_struct *size_buff = NULL; |
| InquiryData_struct *inq_buff = NULL; |
| |
| for(logvol=0; logvol < CISS_MAX_LUN; logvol++) |
| { |
| if(h->drv[logvol].LunID == drv->LunID) { |
| FOUND=1; |
| break; |
| } |
| } |
| |
| if (!FOUND) return 1; |
| |
| size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL); |
| if (size_buff == NULL) |
| { |
| printk(KERN_WARNING "cciss: out of memory\n"); |
| return 1; |
| } |
| inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL); |
| if (inq_buff == NULL) |
| { |
| printk(KERN_WARNING "cciss: out of memory\n"); |
| kfree(size_buff); |
| return 1; |
| } |
| |
| cciss_read_capacity(h->ctlr, logvol, size_buff, 1, &total_size, &block_size); |
| cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size, inq_buff, drv); |
| |
| blk_queue_hardsect_size(drv->queue, drv->block_size); |
| set_capacity(disk, drv->nr_blocks); |
| |
| kfree(size_buff); |
| kfree(inq_buff); |
| return 0; |
| } |
| |
| /* |
| * Wait polling for a command to complete. |
| * The memory mapped FIFO is polled for the completion. |
| * Used only at init time, interrupts from the HBA are disabled. |
| */ |
| static unsigned long pollcomplete(int ctlr) |
| { |
| unsigned long done; |
| int i; |
| |
| /* Wait (up to 20 seconds) for a command to complete */ |
| |
| for (i = 20 * HZ; i > 0; i--) { |
| done = hba[ctlr]->access.command_completed(hba[ctlr]); |
| if (done == FIFO_EMPTY) |
| schedule_timeout_uninterruptible(1); |
| else |
| return (done); |
| } |
| /* Invalid address to tell caller we ran out of time */ |
| return 1; |
| } |
| |
| static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete) |
| { |
| /* We get in here if sendcmd() is polling for completions |
| and gets some command back that it wasn't expecting -- |
| something other than that which it just sent down. |
| Ordinarily, that shouldn't happen, but it can happen when |
| the scsi tape stuff gets into error handling mode, and |
| starts using sendcmd() to try to abort commands and |
| reset tape drives. In that case, sendcmd may pick up |
| completions of commands that were sent to logical drives |
| through the block i/o system, or cciss ioctls completing, etc. |
| In that case, we need to save those completions for later |
| processing by the interrupt handler. |
| */ |
| |
| #ifdef CONFIG_CISS_SCSI_TAPE |
| struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects; |
| |
| /* If it's not the scsi tape stuff doing error handling, (abort */ |
| /* or reset) then we don't expect anything weird. */ |
| if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) { |
| #endif |
| printk( KERN_WARNING "cciss cciss%d: SendCmd " |
| "Invalid command list address returned! (%lx)\n", |
| ctlr, complete); |
| /* not much we can do. */ |
| #ifdef CONFIG_CISS_SCSI_TAPE |
| return 1; |
| } |
| |
| /* We've sent down an abort or reset, but something else |
| has completed */ |
| if (srl->ncompletions >= (NR_CMDS + 2)) { |
| /* Uh oh. No room to save it for later... */ |
| printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, " |
| "reject list overflow, command lost!\n", ctlr); |
| return 1; |
| } |
| /* Save it for later */ |
| srl->complete[srl->ncompletions] = complete; |
| srl->ncompletions++; |
| #endif |
| return 0; |
| } |
| |
| /* |
| * Send a command to the controller, and wait for it to complete. |
| * Only used at init time. |
| */ |
| static int sendcmd( |
| __u8 cmd, |
| int ctlr, |
| void *buff, |
| size_t size, |
| unsigned int use_unit_num, /* 0: address the controller, |
| 1: address logical volume log_unit, |
| 2: periph device address is scsi3addr */ |
| unsigned int log_unit, |
| __u8 page_code, |
| unsigned char *scsi3addr, |
| int cmd_type) |
| { |
| CommandList_struct *c; |
| int i; |
| unsigned long complete; |
| ctlr_info_t *info_p= hba[ctlr]; |
| u64bit buff_dma_handle; |
| int status, done = 0; |
| |
| if ((c = cmd_alloc(info_p, 1)) == NULL) { |
| printk(KERN_WARNING "cciss: unable to get memory"); |
| return(IO_ERROR); |
| } |
| status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num, |
| log_unit, page_code, scsi3addr, cmd_type); |
| if (status != IO_OK) { |
| cmd_free(info_p, c, 1); |
| return status; |
| } |
| resend_cmd1: |
| /* |
| * Disable interrupt |
| */ |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss: turning intr off\n"); |
| #endif /* CCISS_DEBUG */ |
| info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF); |
| |
| /* Make sure there is room in the command FIFO */ |
| /* Actually it should be completely empty at this time */ |
| /* unless we are in here doing error handling for the scsi */ |
| /* tape side of the driver. */ |
| for (i = 200000; i > 0; i--) |
| { |
| /* if fifo isn't full go */ |
| if (!(info_p->access.fifo_full(info_p))) |
| { |
| |
| break; |
| } |
| udelay(10); |
| printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full," |
| " waiting!\n", ctlr); |
| } |
| /* |
| * Send the cmd |
| */ |
| info_p->access.submit_command(info_p, c); |
| done = 0; |
| do { |
| complete = pollcomplete(ctlr); |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss: command completed\n"); |
| #endif /* CCISS_DEBUG */ |
| |
| if (complete == 1) { |
| printk( KERN_WARNING |
| "cciss cciss%d: SendCmd Timeout out, " |
| "No command list address returned!\n", |
| ctlr); |
| status = IO_ERROR; |
| done = 1; |
| break; |
| } |
| |
| /* This will need to change for direct lookup completions */ |
| if ( (complete & CISS_ERROR_BIT) |
| && (complete & ~CISS_ERROR_BIT) == c->busaddr) |
| { |
| /* if data overrun or underun on Report command |
| ignore it |
| */ |
| if (((c->Request.CDB[0] == CISS_REPORT_LOG) || |
| (c->Request.CDB[0] == CISS_REPORT_PHYS) || |
| (c->Request.CDB[0] == CISS_INQUIRY)) && |
| ((c->err_info->CommandStatus == |
| CMD_DATA_OVERRUN) || |
| (c->err_info->CommandStatus == |
| CMD_DATA_UNDERRUN) |
| )) |
| { |
| complete = c->busaddr; |
| } else { |
| if (c->err_info->CommandStatus == |
| CMD_UNSOLICITED_ABORT) { |
| printk(KERN_WARNING "cciss%d: " |
| "unsolicited abort %p\n", |
| ctlr, c); |
| if (c->retry_count < MAX_CMD_RETRIES) { |
| printk(KERN_WARNING |
| "cciss%d: retrying %p\n", |
| ctlr, c); |
| c->retry_count++; |
| /* erase the old error */ |
| /* information */ |
| memset(c->err_info, 0, |
| sizeof(ErrorInfo_struct)); |
| goto resend_cmd1; |
| } else { |
| printk(KERN_WARNING |
| "cciss%d: retried %p too " |
| "many times\n", ctlr, c); |
| status = IO_ERROR; |
| goto cleanup1; |
| } |
| } else if (c->err_info->CommandStatus == CMD_UNABORTABLE) { |
| printk(KERN_WARNING "cciss%d: command could not be aborted.\n", ctlr); |
| status = IO_ERROR; |
| goto cleanup1; |
| } |
| printk(KERN_WARNING "ciss ciss%d: sendcmd" |
| " Error %x \n", ctlr, |
| c->err_info->CommandStatus); |
| printk(KERN_WARNING "ciss ciss%d: sendcmd" |
| " offensive info\n" |
| " size %x\n num %x value %x\n", ctlr, |
| c->err_info->MoreErrInfo.Invalid_Cmd.offense_size, |
| c->err_info->MoreErrInfo.Invalid_Cmd.offense_num, |
| c->err_info->MoreErrInfo.Invalid_Cmd.offense_value); |
| status = IO_ERROR; |
| goto cleanup1; |
| } |
| } |
| /* This will need changing for direct lookup completions */ |
| if (complete != c->busaddr) { |
| if (add_sendcmd_reject(cmd, ctlr, complete) != 0) { |
| BUG(); /* we are pretty much hosed if we get here. */ |
| } |
| continue; |
| } else |
| done = 1; |
| } while (!done); |
| |
| cleanup1: |
| /* unlock the data buffer from DMA */ |
| buff_dma_handle.val32.lower = c->SG[0].Addr.lower; |
| buff_dma_handle.val32.upper = c->SG[0].Addr.upper; |
| pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val, |
| c->SG[0].Len, PCI_DMA_BIDIRECTIONAL); |
| #ifdef CONFIG_CISS_SCSI_TAPE |
| /* if we saved some commands for later, process them now. */ |
| if (info_p->scsi_rejects.ncompletions > 0) |
| do_cciss_intr(0, info_p, NULL); |
| #endif |
| cmd_free(info_p, c, 1); |
| return (status); |
| } |
| /* |
| * Map (physical) PCI mem into (virtual) kernel space |
| */ |
| static void __iomem *remap_pci_mem(ulong base, ulong size) |
| { |
| ulong page_base = ((ulong) base) & PAGE_MASK; |
| ulong page_offs = ((ulong) base) - page_base; |
| void __iomem *page_remapped = ioremap(page_base, page_offs+size); |
| |
| return page_remapped ? (page_remapped + page_offs) : NULL; |
| } |
| |
| /* |
| * Takes jobs of the Q and sends them to the hardware, then puts it on |
| * the Q to wait for completion. |
| */ |
| static void start_io( ctlr_info_t *h) |
| { |
| CommandList_struct *c; |
| |
| while(( c = h->reqQ) != NULL ) |
| { |
| /* can't do anything if fifo is full */ |
| if ((h->access.fifo_full(h))) { |
| printk(KERN_WARNING "cciss: fifo full\n"); |
| break; |
| } |
| |
| /* Get the frist entry from the Request Q */ |
| removeQ(&(h->reqQ), c); |
| h->Qdepth--; |
| |
| /* Tell the controller execute command */ |
| h->access.submit_command(h, c); |
| |
| /* Put job onto the completed Q */ |
| addQ (&(h->cmpQ), c); |
| } |
| } |
| |
| static inline void complete_buffers(struct bio *bio, int status) |
| { |
| while (bio) { |
| struct bio *xbh = bio->bi_next; |
| int nr_sectors = bio_sectors(bio); |
| |
| bio->bi_next = NULL; |
| blk_finished_io(len); |
| bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO); |
| bio = xbh; |
| } |
| |
| } |
| /* Assumes that CCISS_LOCK(h->ctlr) is held. */ |
| /* Zeros out the error record and then resends the command back */ |
| /* to the controller */ |
| static inline void resend_cciss_cmd( ctlr_info_t *h, CommandList_struct *c) |
| { |
| /* erase the old error information */ |
| memset(c->err_info, 0, sizeof(ErrorInfo_struct)); |
| |
| /* add it to software queue and then send it to the controller */ |
| addQ(&(h->reqQ),c); |
| h->Qdepth++; |
| if(h->Qdepth > h->maxQsinceinit) |
| h->maxQsinceinit = h->Qdepth; |
| |
| start_io(h); |
| } |
| /* checks the status of the job and calls complete buffers to mark all |
| * buffers for the completed job. |
| */ |
| static inline void complete_command( ctlr_info_t *h, CommandList_struct *cmd, |
| int timeout) |
| { |
| int status = 1; |
| int i; |
| int retry_cmd = 0; |
| u64bit temp64; |
| |
| if (timeout) |
| status = 0; |
| |
| if(cmd->err_info->CommandStatus != 0) |
| { /* an error has occurred */ |
| switch(cmd->err_info->CommandStatus) |
| { |
| unsigned char sense_key; |
| case CMD_TARGET_STATUS: |
| status = 0; |
| |
| if( cmd->err_info->ScsiStatus == 0x02) |
| { |
| printk(KERN_WARNING "cciss: cmd %p " |
| "has CHECK CONDITION " |
| " byte 2 = 0x%x\n", cmd, |
| cmd->err_info->SenseInfo[2] |
| ); |
| /* check the sense key */ |
| sense_key = 0xf & |
| cmd->err_info->SenseInfo[2]; |
| /* no status or recovered error */ |
| if((sense_key == 0x0) || |
| (sense_key == 0x1)) |
| { |
| status = 1; |
| } |
| } else |
| { |
| printk(KERN_WARNING "cciss: cmd %p " |
| "has SCSI Status 0x%x\n", |
| cmd, cmd->err_info->ScsiStatus); |
| } |
| break; |
| case CMD_DATA_UNDERRUN: |
| printk(KERN_WARNING "cciss: cmd %p has" |
| " completed with data underrun " |
| "reported\n", cmd); |
| break; |
| case CMD_DATA_OVERRUN: |
| printk(KERN_WARNING "cciss: cmd %p has" |
| " completed with data overrun " |
| "reported\n", cmd); |
| break; |
| case CMD_INVALID: |
| printk(KERN_WARNING "cciss: cmd %p is " |
| "reported invalid\n", cmd); |
| status = 0; |
| break; |
| case CMD_PROTOCOL_ERR: |
| printk(KERN_WARNING "cciss: cmd %p has " |
| "protocol error \n", cmd); |
| status = 0; |
| break; |
| case CMD_HARDWARE_ERR: |
| printk(KERN_WARNING "cciss: cmd %p had " |
| " hardware error\n", cmd); |
| status = 0; |
| break; |
| case CMD_CONNECTION_LOST: |
| printk(KERN_WARNING "cciss: cmd %p had " |
| "connection lost\n", cmd); |
| status=0; |
| break; |
| case CMD_ABORTED: |
| printk(KERN_WARNING "cciss: cmd %p was " |
| "aborted\n", cmd); |
| status=0; |
| break; |
| case CMD_ABORT_FAILED: |
| printk(KERN_WARNING "cciss: cmd %p reports " |
| "abort failed\n", cmd); |
| status=0; |
| break; |
| case CMD_UNSOLICITED_ABORT: |
| printk(KERN_WARNING "cciss%d: unsolicited " |
| "abort %p\n", h->ctlr, cmd); |
| if (cmd->retry_count < MAX_CMD_RETRIES) { |
| retry_cmd=1; |
| printk(KERN_WARNING |
| "cciss%d: retrying %p\n", |
| h->ctlr, cmd); |
| cmd->retry_count++; |
| } else |
| printk(KERN_WARNING |
| "cciss%d: %p retried too " |
| "many times\n", h->ctlr, cmd); |
| status=0; |
| break; |
| case CMD_TIMEOUT: |
| printk(KERN_WARNING "cciss: cmd %p timedout\n", |
| cmd); |
| status=0; |
| break; |
| default: |
| printk(KERN_WARNING "cciss: cmd %p returned " |
| "unknown status %x\n", cmd, |
| cmd->err_info->CommandStatus); |
| status=0; |
| } |
| } |
| /* We need to return this command */ |
| if(retry_cmd) { |
| resend_cciss_cmd(h,cmd); |
| return; |
| } |
| /* command did not need to be retried */ |
| /* unmap the DMA mapping for all the scatter gather elements */ |
| for(i=0; i<cmd->Header.SGList; i++) { |
| temp64.val32.lower = cmd->SG[i].Addr.lower; |
| temp64.val32.upper = cmd->SG[i].Addr.upper; |
| pci_unmap_page(hba[cmd->ctlr]->pdev, |
| temp64.val, cmd->SG[i].Len, |
| (cmd->Request.Type.Direction == XFER_READ) ? |
| PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE); |
| } |
| complete_buffers(cmd->rq->bio, status); |
| |
| #ifdef CCISS_DEBUG |
| printk("Done with %p\n", cmd->rq); |
| #endif /* CCISS_DEBUG */ |
| |
| end_that_request_last(cmd->rq); |
| cmd_free(h,cmd,1); |
| } |
| |
| /* |
| * Get a request and submit it to the controller. |
| */ |
| static void do_cciss_request(request_queue_t *q) |
| { |
| ctlr_info_t *h= q->queuedata; |
| CommandList_struct *c; |
| int start_blk, seg; |
| struct request *creq; |
| u64bit temp64; |
| struct scatterlist tmp_sg[MAXSGENTRIES]; |
| drive_info_struct *drv; |
| int i, dir; |
| |
| /* We call start_io here in case there is a command waiting on the |
| * queue that has not been sent. |
| */ |
| if (blk_queue_plugged(q)) |
| goto startio; |
| |
| queue: |
| creq = elv_next_request(q); |
| if (!creq) |
| goto startio; |
| |
| if (creq->nr_phys_segments > MAXSGENTRIES) |
| BUG(); |
| |
| if (( c = cmd_alloc(h, 1)) == NULL) |
| goto full; |
| |
| blkdev_dequeue_request(creq); |
| |
| spin_unlock_irq(q->queue_lock); |
| |
| c->cmd_type = CMD_RWREQ; |
| c->rq = creq; |
| |
| /* fill in the request */ |
| drv = creq->rq_disk->private_data; |
| c->Header.ReplyQueue = 0; // unused in simple mode |
| /* got command from pool, so use the command block index instead */ |
| /* for direct lookups. */ |
| /* The first 2 bits are reserved for controller error reporting. */ |
| c->Header.Tag.lower = (c->cmdindex << 3); |
| c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */ |
| c->Header.LUN.LogDev.VolId= drv->LunID; |
| c->Header.LUN.LogDev.Mode = 1; |
| c->Request.CDBLen = 10; // 12 byte commands not in FW yet; |
| c->Request.Type.Type = TYPE_CMD; // It is a command. |
| c->Request.Type.Attribute = ATTR_SIMPLE; |
| c->Request.Type.Direction = |
| (rq_data_dir(creq) == READ) ? XFER_READ: XFER_WRITE; |
| c->Request.Timeout = 0; // Don't time out |
| c->Request.CDB[0] = (rq_data_dir(creq) == READ) ? CCISS_READ : CCISS_WRITE; |
| start_blk = creq->sector; |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n",(int) creq->sector, |
| (int) creq->nr_sectors); |
| #endif /* CCISS_DEBUG */ |
| |
| seg = blk_rq_map_sg(q, creq, tmp_sg); |
| |
| /* get the DMA records for the setup */ |
| if (c->Request.Type.Direction == XFER_READ) |
| dir = PCI_DMA_FROMDEVICE; |
| else |
| dir = PCI_DMA_TODEVICE; |
| |
| for (i=0; i<seg; i++) |
| { |
| c->SG[i].Len = tmp_sg[i].length; |
| temp64.val = (__u64) pci_map_page(h->pdev, tmp_sg[i].page, |
| tmp_sg[i].offset, tmp_sg[i].length, |
| dir); |
| c->SG[i].Addr.lower = temp64.val32.lower; |
| c->SG[i].Addr.upper = temp64.val32.upper; |
| c->SG[i].Ext = 0; // we are not chaining |
| } |
| /* track how many SG entries we are using */ |
| if( seg > h->maxSG) |
| h->maxSG = seg; |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n", creq->nr_sectors, seg); |
| #endif /* CCISS_DEBUG */ |
| |
| c->Header.SGList = c->Header.SGTotal = seg; |
| c->Request.CDB[1]= 0; |
| c->Request.CDB[2]= (start_blk >> 24) & 0xff; //MSB |
| c->Request.CDB[3]= (start_blk >> 16) & 0xff; |
| c->Request.CDB[4]= (start_blk >> 8) & 0xff; |
| c->Request.CDB[5]= start_blk & 0xff; |
| c->Request.CDB[6]= 0; // (sect >> 24) & 0xff; MSB |
| c->Request.CDB[7]= (creq->nr_sectors >> 8) & 0xff; |
| c->Request.CDB[8]= creq->nr_sectors & 0xff; |
| c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0; |
| |
| spin_lock_irq(q->queue_lock); |
| |
| addQ(&(h->reqQ),c); |
| h->Qdepth++; |
| if(h->Qdepth > h->maxQsinceinit) |
| h->maxQsinceinit = h->Qdepth; |
| |
| goto queue; |
| full: |
| blk_stop_queue(q); |
| startio: |
| /* We will already have the driver lock here so not need |
| * to lock it. |
| */ |
| start_io(h); |
| } |
| |
| static inline unsigned long get_next_completion(ctlr_info_t *h) |
| { |
| #ifdef CONFIG_CISS_SCSI_TAPE |
| /* Any rejects from sendcmd() lying around? Process them first */ |
| if (h->scsi_rejects.ncompletions == 0) |
| return h->access.command_completed(h); |
| else { |
| struct sendcmd_reject_list *srl; |
| int n; |
| srl = &h->scsi_rejects; |
| n = --srl->ncompletions; |
| /* printk("cciss%d: processing saved reject\n", h->ctlr); */ |
| printk("p"); |
| return srl->complete[n]; |
| } |
| #else |
| return h->access.command_completed(h); |
| #endif |
| } |
| |
| static inline int interrupt_pending(ctlr_info_t *h) |
| { |
| #ifdef CONFIG_CISS_SCSI_TAPE |
| return ( h->access.intr_pending(h) |
| || (h->scsi_rejects.ncompletions > 0)); |
| #else |
| return h->access.intr_pending(h); |
| #endif |
| } |
| |
| static inline long interrupt_not_for_us(ctlr_info_t *h) |
| { |
| #ifdef CONFIG_CISS_SCSI_TAPE |
| return (((h->access.intr_pending(h) == 0) || |
| (h->interrupts_enabled == 0)) |
| && (h->scsi_rejects.ncompletions == 0)); |
| #else |
| return (((h->access.intr_pending(h) == 0) || |
| (h->interrupts_enabled == 0))); |
| #endif |
| } |
| |
| static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs) |
| { |
| ctlr_info_t *h = dev_id; |
| CommandList_struct *c; |
| unsigned long flags; |
| __u32 a, a1, a2; |
| int j; |
| int start_queue = h->next_to_run; |
| |
| if (interrupt_not_for_us(h)) |
| return IRQ_NONE; |
| /* |
| * If there are completed commands in the completion queue, |
| * we had better do something about it. |
| */ |
| spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); |
| while (interrupt_pending(h)) { |
| while((a = get_next_completion(h)) != FIFO_EMPTY) { |
| a1 = a; |
| if ((a & 0x04)) { |
| a2 = (a >> 3); |
| if (a2 >= NR_CMDS) { |
| printk(KERN_WARNING "cciss: controller cciss%d failed, stopping.\n", h->ctlr); |
| fail_all_cmds(h->ctlr); |
| return IRQ_HANDLED; |
| } |
| |
| c = h->cmd_pool + a2; |
| a = c->busaddr; |
| |
| } else { |
| a &= ~3; |
| if ((c = h->cmpQ) == NULL) { |
| printk(KERN_WARNING "cciss: Completion of %08x ignored\n", a1); |
| continue; |
| } |
| while(c->busaddr != a) { |
| c = c->next; |
| if (c == h->cmpQ) |
| break; |
| } |
| } |
| /* |
| * If we've found the command, take it off the |
| * completion Q and free it |
| */ |
| if (c->busaddr == a) { |
| removeQ(&h->cmpQ, c); |
| if (c->cmd_type == CMD_RWREQ) { |
| complete_command(h, c, 0); |
| } else if (c->cmd_type == CMD_IOCTL_PEND) { |
| complete(c->waiting); |
| } |
| # ifdef CONFIG_CISS_SCSI_TAPE |
| else if (c->cmd_type == CMD_SCSI) |
| complete_scsi_command(c, 0, a1); |
| # endif |
| continue; |
| } |
| } |
| } |
| |
| /* check to see if we have maxed out the number of commands that can |
| * be placed on the queue. If so then exit. We do this check here |
| * in case the interrupt we serviced was from an ioctl and did not |
| * free any new commands. |
| */ |
| if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) |
| goto cleanup; |
| |
| /* We have room on the queue for more commands. Now we need to queue |
| * them up. We will also keep track of the next queue to run so |
| * that every queue gets a chance to be started first. |
| */ |
| for (j=0; j < h->highest_lun + 1; j++){ |
| int curr_queue = (start_queue + j) % (h->highest_lun + 1); |
| /* make sure the disk has been added and the drive is real |
| * because this can be called from the middle of init_one. |
| */ |
| if(!(h->drv[curr_queue].queue) || |
| !(h->drv[curr_queue].heads)) |
| continue; |
| blk_start_queue(h->gendisk[curr_queue]->queue); |
| |
| /* check to see if we have maxed out the number of commands |
| * that can be placed on the queue. |
| */ |
| if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS) |
| { |
| if (curr_queue == start_queue){ |
| h->next_to_run = (start_queue + 1) % (h->highest_lun + 1); |
| goto cleanup; |
| } else { |
| h->next_to_run = curr_queue; |
| goto cleanup; |
| } |
| } else { |
| curr_queue = (curr_queue + 1) % (h->highest_lun + 1); |
| } |
| } |
| |
| cleanup: |
| spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); |
| return IRQ_HANDLED; |
| } |
| /* |
| * We cannot read the structure directly, for portablity we must use |
| * the io functions. |
| * This is for debug only. |
| */ |
| #ifdef CCISS_DEBUG |
| static void print_cfg_table( CfgTable_struct *tb) |
| { |
| int i; |
| char temp_name[17]; |
| |
| printk("Controller Configuration information\n"); |
| printk("------------------------------------\n"); |
| for(i=0;i<4;i++) |
| temp_name[i] = readb(&(tb->Signature[i])); |
| temp_name[4]='\0'; |
| printk(" Signature = %s\n", temp_name); |
| printk(" Spec Number = %d\n", readl(&(tb->SpecValence))); |
| printk(" Transport methods supported = 0x%x\n", |
| readl(&(tb-> TransportSupport))); |
| printk(" Transport methods active = 0x%x\n", |
| readl(&(tb->TransportActive))); |
| printk(" Requested transport Method = 0x%x\n", |
| readl(&(tb->HostWrite.TransportRequest))); |
| printk(" Coalese Interrupt Delay = 0x%x\n", |
| readl(&(tb->HostWrite.CoalIntDelay))); |
| printk(" Coalese Interrupt Count = 0x%x\n", |
| readl(&(tb->HostWrite.CoalIntCount))); |
| printk(" Max outstanding commands = 0x%d\n", |
| readl(&(tb->CmdsOutMax))); |
| printk(" Bus Types = 0x%x\n", readl(&(tb-> BusTypes))); |
| for(i=0;i<16;i++) |
| temp_name[i] = readb(&(tb->ServerName[i])); |
| temp_name[16] = '\0'; |
| printk(" Server Name = %s\n", temp_name); |
| printk(" Heartbeat Counter = 0x%x\n\n\n", |
| readl(&(tb->HeartBeat))); |
| } |
| #endif /* CCISS_DEBUG */ |
| |
| static void release_io_mem(ctlr_info_t *c) |
| { |
| /* if IO mem was not protected do nothing */ |
| if( c->io_mem_addr == 0) |
| return; |
| release_region(c->io_mem_addr, c->io_mem_length); |
| c->io_mem_addr = 0; |
| c->io_mem_length = 0; |
| } |
| |
| static int find_PCI_BAR_index(struct pci_dev *pdev, |
| unsigned long pci_bar_addr) |
| { |
| int i, offset, mem_type, bar_type; |
| if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */ |
| return 0; |
| offset = 0; |
| for (i=0; i<DEVICE_COUNT_RESOURCE; i++) { |
| bar_type = pci_resource_flags(pdev, i) & |
| PCI_BASE_ADDRESS_SPACE; |
| if (bar_type == PCI_BASE_ADDRESS_SPACE_IO) |
| offset += 4; |
| else { |
| mem_type = pci_resource_flags(pdev, i) & |
| PCI_BASE_ADDRESS_MEM_TYPE_MASK; |
| switch (mem_type) { |
| case PCI_BASE_ADDRESS_MEM_TYPE_32: |
| case PCI_BASE_ADDRESS_MEM_TYPE_1M: |
| offset += 4; /* 32 bit */ |
| break; |
| case PCI_BASE_ADDRESS_MEM_TYPE_64: |
| offset += 8; |
| break; |
| default: /* reserved in PCI 2.2 */ |
| printk(KERN_WARNING "Base address is invalid\n"); |
| return -1; |
| break; |
| } |
| } |
| if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0) |
| return i+1; |
| } |
| return -1; |
| } |
| |
| static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) |
| { |
| ushort subsystem_vendor_id, subsystem_device_id, command; |
| __u32 board_id, scratchpad = 0; |
| __u64 cfg_offset; |
| __u32 cfg_base_addr; |
| __u64 cfg_base_addr_index; |
| int i; |
| |
| /* check to see if controller has been disabled */ |
| /* BEFORE trying to enable it */ |
| (void) pci_read_config_word(pdev, PCI_COMMAND,&command); |
| if(!(command & 0x02)) |
| { |
| printk(KERN_WARNING "cciss: controller appears to be disabled\n"); |
| return(-1); |
| } |
| |
| if (pci_enable_device(pdev)) |
| { |
| printk(KERN_ERR "cciss: Unable to Enable PCI device\n"); |
| return( -1); |
| } |
| |
| subsystem_vendor_id = pdev->subsystem_vendor; |
| subsystem_device_id = pdev->subsystem_device; |
| board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) | |
| subsystem_vendor_id); |
| |
| /* search for our IO range so we can protect it */ |
| for(i=0; i<DEVICE_COUNT_RESOURCE; i++) |
| { |
| /* is this an IO range */ |
| if( pci_resource_flags(pdev, i) & 0x01 ) { |
| c->io_mem_addr = pci_resource_start(pdev, i); |
| c->io_mem_length = pci_resource_end(pdev, i) - |
| pci_resource_start(pdev, i) +1; |
| #ifdef CCISS_DEBUG |
| printk("IO value found base_addr[%d] %lx %lx\n", i, |
| c->io_mem_addr, c->io_mem_length); |
| #endif /* CCISS_DEBUG */ |
| /* register the IO range */ |
| if(!request_region( c->io_mem_addr, |
| c->io_mem_length, "cciss")) |
| { |
| printk(KERN_WARNING "cciss I/O memory range already in use addr=%lx length=%ld\n", |
| c->io_mem_addr, c->io_mem_length); |
| c->io_mem_addr= 0; |
| c->io_mem_length = 0; |
| } |
| break; |
| } |
| } |
| |
| #ifdef CCISS_DEBUG |
| printk("command = %x\n", command); |
| printk("irq = %x\n", pdev->irq); |
| printk("board_id = %x\n", board_id); |
| #endif /* CCISS_DEBUG */ |
| |
| c->intr = pdev->irq; |
| |
| /* |
| * Memory base addr is first addr , the second points to the config |
| * table |
| */ |
| |
| c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */ |
| #ifdef CCISS_DEBUG |
| printk("address 0 = %x\n", c->paddr); |
| #endif /* CCISS_DEBUG */ |
| c->vaddr = remap_pci_mem(c->paddr, 200); |
| |
| /* Wait for the board to become ready. (PCI hotplug needs this.) |
| * We poll for up to 120 secs, once per 100ms. */ |
| for (i=0; i < 1200; i++) { |
| scratchpad = readl(c->vaddr + SA5_SCRATCHPAD_OFFSET); |
| if (scratchpad == CCISS_FIRMWARE_READY) |
| break; |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule_timeout(HZ / 10); /* wait 100ms */ |
| } |
| if (scratchpad != CCISS_FIRMWARE_READY) { |
| printk(KERN_WARNING "cciss: Board not ready. Timed out.\n"); |
| return -1; |
| } |
| |
| /* get the address index number */ |
| cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET); |
| cfg_base_addr &= (__u32) 0x0000ffff; |
| #ifdef CCISS_DEBUG |
| printk("cfg base address = %x\n", cfg_base_addr); |
| #endif /* CCISS_DEBUG */ |
| cfg_base_addr_index = |
| find_PCI_BAR_index(pdev, cfg_base_addr); |
| #ifdef CCISS_DEBUG |
| printk("cfg base address index = %x\n", cfg_base_addr_index); |
| #endif /* CCISS_DEBUG */ |
| if (cfg_base_addr_index == -1) { |
| printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n"); |
| release_io_mem(c); |
| return -1; |
| } |
| |
| cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET); |
| #ifdef CCISS_DEBUG |
| printk("cfg offset = %x\n", cfg_offset); |
| #endif /* CCISS_DEBUG */ |
| c->cfgtable = remap_pci_mem(pci_resource_start(pdev, |
| cfg_base_addr_index) + cfg_offset, |
| sizeof(CfgTable_struct)); |
| c->board_id = board_id; |
| |
| #ifdef CCISS_DEBUG |
| print_cfg_table(c->cfgtable); |
| #endif /* CCISS_DEBUG */ |
| |
| for(i=0; i<NR_PRODUCTS; i++) { |
| if (board_id == products[i].board_id) { |
| c->product_name = products[i].product_name; |
| c->access = *(products[i].access); |
| break; |
| } |
| } |
| if (i == NR_PRODUCTS) { |
| printk(KERN_WARNING "cciss: Sorry, I don't know how" |
| " to access the Smart Array controller %08lx\n", |
| (unsigned long)board_id); |
| return -1; |
| } |
| if ( (readb(&c->cfgtable->Signature[0]) != 'C') || |
| (readb(&c->cfgtable->Signature[1]) != 'I') || |
| (readb(&c->cfgtable->Signature[2]) != 'S') || |
| (readb(&c->cfgtable->Signature[3]) != 'S') ) |
| { |
| printk("Does not appear to be a valid CISS config table\n"); |
| return -1; |
| } |
| |
| #ifdef CONFIG_X86 |
| { |
| /* Need to enable prefetch in the SCSI core for 6400 in x86 */ |
| __u32 prefetch; |
| prefetch = readl(&(c->cfgtable->SCSI_Prefetch)); |
| prefetch |= 0x100; |
| writel(prefetch, &(c->cfgtable->SCSI_Prefetch)); |
| } |
| #endif |
| |
| #ifdef CCISS_DEBUG |
| printk("Trying to put board into Simple mode\n"); |
| #endif /* CCISS_DEBUG */ |
| c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); |
| /* Update the field, and then ring the doorbell */ |
| writel( CFGTBL_Trans_Simple, |
| &(c->cfgtable->HostWrite.TransportRequest)); |
| writel( CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL); |
| |
| /* under certain very rare conditions, this can take awhile. |
| * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right |
| * as we enter this code.) */ |
| for(i=0;i<MAX_CONFIG_WAIT;i++) { |
| if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq)) |
| break; |
| /* delay and try again */ |
| set_current_state(TASK_INTERRUPTIBLE); |
| schedule_timeout(10); |
| } |
| |
| #ifdef CCISS_DEBUG |
| printk(KERN_DEBUG "I counter got to %d %x\n", i, readl(c->vaddr + SA5_DOORBELL)); |
| #endif /* CCISS_DEBUG */ |
| #ifdef CCISS_DEBUG |
| print_cfg_table(c->cfgtable); |
| #endif /* CCISS_DEBUG */ |
| |
| if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) |
| { |
| printk(KERN_WARNING "cciss: unable to get board into" |
| " simple mode\n"); |
| return -1; |
| } |
| return 0; |
| |
| } |
| |
| /* |
| * Gets information about the local volumes attached to the controller. |
| */ |
| static void cciss_getgeometry(int cntl_num) |
| { |
| ReportLunData_struct *ld_buff; |
| ReadCapdata_struct *size_buff; |
| InquiryData_struct *inq_buff; |
| int return_code; |
| int i; |
| int listlength = 0; |
| __u32 lunid = 0; |
| int block_size; |
| int total_size; |
| |
| ld_buff = kmalloc(sizeof(ReportLunData_struct), GFP_KERNEL); |
| if (ld_buff == NULL) |
| { |
| printk(KERN_ERR "cciss: out of memory\n"); |
| return; |
| } |
| memset(ld_buff, 0, sizeof(ReportLunData_struct)); |
| size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL); |
| if (size_buff == NULL) |
| { |
|