| /* |
| * BSD LICENSE |
| * |
| * Copyright (c) 2015 Broadcom. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name of Broadcom Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/bcm-ns2.h> |
| |
| / { |
| compatible = "brcm,ns2"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| A57_0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57", "arm,armv8"; |
| reg = <0 0>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER0_L2>; |
| }; |
| |
| A57_1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57", "arm,armv8"; |
| reg = <0 1>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER0_L2>; |
| }; |
| |
| A57_2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57", "arm,armv8"; |
| reg = <0 2>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER0_L2>; |
| }; |
| |
| A57_3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57", "arm,armv8"; |
| reg = <0 3>; |
| enable-method = "psci"; |
| next-level-cache = <&CLUSTER0_L2>; |
| }; |
| |
| CLUSTER0_L2: l2-cache@000 { |
| compatible = "cache"; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) | |
| IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&A57_0>, |
| <&A57_1>, |
| <&A57_2>, |
| <&A57_3>; |
| }; |
| |
| pcie0: pcie@20020000 { |
| compatible = "brcm,iproc-pcie"; |
| reg = <0 0x20020000 0 0x1000>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &gic GIC_SPI 281 IRQ_TYPE_NONE>; |
| |
| linux,pci-domain = <0>; |
| |
| bus-range = <0x00 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| ranges = <0x83000000 0 0x00000000 0 0x00000000 0 0x20000000>; |
| |
| brcm,pcie-ob; |
| brcm,pcie-ob-oarr-size; |
| brcm,pcie-ob-axi-offset = <0x00000000>; |
| brcm,pcie-ob-window-size = <256>; |
| |
| status = "disabled"; |
| |
| msi-parent = <&msi0>; |
| msi0: msi@20020000 { |
| compatible = "brcm,iproc-msi"; |
| msi-controller; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 277 IRQ_TYPE_NONE>, |
| <GIC_SPI 278 IRQ_TYPE_NONE>, |
| <GIC_SPI 279 IRQ_TYPE_NONE>, |
| <GIC_SPI 280 IRQ_TYPE_NONE>; |
| brcm,num-eq-region = <1>; |
| brcm,num-msi-msg-region = <1>; |
| }; |
| }; |
| |
| pcie4: pcie@50020000 { |
| compatible = "brcm,iproc-pcie"; |
| reg = <0 0x50020000 0 0x1000>; |
| |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &gic GIC_SPI 305 IRQ_TYPE_NONE>; |
| |
| linux,pci-domain = <4>; |
| |
| bus-range = <0x00 0xff>; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| device_type = "pci"; |
| ranges = <0x83000000 0 0x00000000 0 0x30000000 0 0x20000000>; |
| |
| brcm,pcie-ob; |
| brcm,pcie-ob-oarr-size; |
| brcm,pcie-ob-axi-offset = <0x30000000>; |
| brcm,pcie-ob-window-size = <256>; |
| |
| status = "disabled"; |
| |
| msi-parent = <&msi4>; |
| msi4: msi@50020000 { |
| compatible = "brcm,iproc-msi"; |
| msi-controller; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 301 IRQ_TYPE_NONE>, |
| <GIC_SPI 302 IRQ_TYPE_NONE>, |
| <GIC_SPI 303 IRQ_TYPE_NONE>, |
| <GIC_SPI 304 IRQ_TYPE_NONE>; |
| }; |
| }; |
| |
| soc: soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| |
| #include "ns2-clock.dtsi" |
| |
| dma0: dma@61360000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x61360000 0x1000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| clocks = <&iprocslow>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| smmu: mmu@64000000 { |
| compatible = "arm,mmu-500"; |
| reg = <0x64000000 0x40000>; |
| #global-interrupts = <2>; |
| interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; |
| mmu-masters; |
| }; |
| |
| pinctrl: pinctrl@6501d130 { |
| compatible = "brcm,ns2-pinmux"; |
| reg = <0x6501d130 0x08>, |
| <0x660a0028 0x04>, |
| <0x660009b0 0x40>; |
| }; |
| |
| gpio_aon: gpio@65024800 { |
| compatible = "brcm,iproc-gpio"; |
| reg = <0x65024800 0x50>, |
| <0x65024008 0x18>; |
| ngpios = <6>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| |
| gic: interrupt-controller@65210000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x65210000 0x1000>, |
| <0x65220000 0x1000>, |
| <0x65240000 0x2000>, |
| <0x65260000 0x1000>; |
| interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) | |
| IRQ_TYPE_LEVEL_HIGH)>; |
| }; |
| |
| cci@65590000 { |
| compatible = "arm,cci-400"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x65590000 0x1000>; |
| ranges = <0 0x65590000 0x10000>; |
| |
| pmu@9000 { |
| compatible = "arm,cci-400-pmu,r1", |
| "arm,cci-400-pmu"; |
| reg = <0x9000 0x4000>; |
| interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| mdio_mux_iproc: mdio-mux@6602023c { |
| compatible = "brcm,mdio-mux-iproc"; |
| reg = <0x6602023c 0x14>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mdio@0 { |
| reg = <0x0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pci_phy0: pci-phy@0 { |
| compatible = "brcm,ns2-pcie-phy"; |
| reg = <0x0>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| mdio@7 { |
| reg = <0x7>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pci_phy1: pci-phy@0 { |
| compatible = "brcm,ns2-pcie-phy"; |
| reg = <0x0>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| mdio@10 { |
| reg = <0x10>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
| |
| timer0: timer@66030000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x66030000 0x1000>; |
| interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>, |
| <&iprocslow>, |
| <&iprocslow>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| }; |
| |
| timer1: timer@66040000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x66040000 0x1000>; |
| interrupts = <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>, |
| <&iprocslow>, |
| <&iprocslow>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| }; |
| |
| timer2: timer@66050000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x66050000 0x1000>; |
| interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>, |
| <&iprocslow>, |
| <&iprocslow>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| }; |
| |
| timer3: timer@66060000 { |
| compatible = "arm,sp804", "arm,primecell"; |
| reg = <0x66060000 0x1000>; |
| interrupts = <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>, |
| <&iprocslow>, |
| <&iprocslow>; |
| clock-names = "timer1", "timer2", "apb_pclk"; |
| }; |
| |
| i2c0: i2c@66080000 { |
| compatible = "brcm,iproc-i2c"; |
| reg = <0x66080000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 394 IRQ_TYPE_NONE>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| wdt0: watchdog@66090000 { |
| compatible = "arm,sp805", "arm,primecell"; |
| reg = <0x66090000 0x1000>; |
| interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>, <&iprocslow>; |
| clock-names = "wdogclk", "apb_pclk"; |
| }; |
| |
| gpio_g: gpio@660a0000 { |
| compatible = "brcm,iproc-gpio"; |
| reg = <0x660a0000 0x50>; |
| ngpios = <32>; |
| #gpio-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| interrupts = <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| i2c1: i2c@660b0000 { |
| compatible = "brcm,iproc-i2c"; |
| reg = <0x660b0000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 395 IRQ_TYPE_NONE>; |
| clock-frequency = <100000>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@66100000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x66100000 0x100>; |
| interrupts = <GIC_SPI 390 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@66110000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x66110000 0x100>; |
| interrupts = <GIC_SPI 391 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@66120000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x66120000 0x100>; |
| interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@66130000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x66130000 0x100>; |
| interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| clocks = <&osc>; |
| status = "disabled"; |
| }; |
| |
| ssp0: ssp@66180000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x66180000 0x1000>; |
| interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>, <&iprocslow>; |
| clock-names = "spiclk", "apb_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| ssp1: ssp@66190000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x66190000 0x1000>; |
| interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&iprocslow>, <&iprocslow>; |
| clock-names = "spiclk", "apb_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| hwrng: hwrng@66220000 { |
| compatible = "brcm,iproc-rng200"; |
| reg = <0x66220000 0x28>; |
| }; |
| |
| sata_phy: sata_phy@663f0100 { |
| compatible = "brcm,iproc-ns2-sata-phy"; |
| reg = <0x663f0100 0x1f00>, |
| <0x663f004c 0x10>; |
| reg-names = "phy", "phy-ctrl"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| sata_phy0: sata-phy@0 { |
| reg = <0>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| sata_phy1: sata-phy@1 { |
| reg = <1>; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| sata: ahci@663f2000 { |
| compatible = "brcm,iproc-ahci", "generic-ahci"; |
| reg = <0x663f2000 0x1000>; |
| reg-names = "ahci"; |
| interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| sata0: sata-port@0 { |
| reg = <0>; |
| phys = <&sata_phy0>; |
| phy-names = "sata-phy"; |
| }; |
| |
| sata1: sata-port@1 { |
| reg = <1>; |
| phys = <&sata_phy1>; |
| phy-names = "sata-phy"; |
| }; |
| }; |
| |
| sdio0: sdhci@66420000 { |
| compatible = "brcm,sdhci-iproc-cygnus"; |
| reg = <0x66420000 0x100>; |
| interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; |
| bus-width = <8>; |
| clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; |
| status = "disabled"; |
| }; |
| |
| sdio1: sdhci@66430000 { |
| compatible = "brcm,sdhci-iproc-cygnus"; |
| reg = <0x66430000 0x100>; |
| interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; |
| bus-width = <8>; |
| clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; |
| status = "disabled"; |
| }; |
| |
| nand: nand@66460000 { |
| compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; |
| reg = <0x66460000 0x600>, |
| <0x67015408 0x600>, |
| <0x66460f00 0x20>; |
| reg-names = "nand", "iproc-idm", "iproc-ext"; |
| interrupts = <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| brcm,nand-has-wp; |
| }; |
| }; |
| }; |
