blob: 29e71ed6b8a7fb9c5e4b8381244a4c3d5b1d47db [file] [log] [blame]
#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "Blackfin Kernel Configuration"
config MMU
bool
default n
config FPU
bool
default n
config RWSEM_GENERIC_SPINLOCK
bool
default y
config RWSEM_XCHGADD_ALGORITHM
bool
default n
config BLACKFIN
bool
default y
select HAVE_IDE
select HAVE_OPROFILE
config ZONE_DMA
bool
default y
config GENERIC_FIND_NEXT_BIT
bool
default y
config GENERIC_HWEIGHT
bool
default y
config GENERIC_HARDIRQS
bool
default y
config GENERIC_IRQ_PROBE
bool
default y
config GENERIC_GPIO
bool
default y
config FORCE_MAX_ZONEORDER
int
default "14"
config GENERIC_CALIBRATE_DELAY
bool
default y
config HARDWARE_PM
def_bool y
depends on OPROFILE
source "init/Kconfig"
source "kernel/Kconfig.preempt"
source "kernel/Kconfig.freezer"
menu "Blackfin Processor Options"
comment "Processor and Board Settings"
choice
prompt "CPU"
default BF533
config BF522
bool "BF522"
help
BF522 Processor Support.
config BF523
bool "BF523"
help
BF523 Processor Support.
config BF524
bool "BF524"
help
BF524 Processor Support.
config BF525
bool "BF525"
help
BF525 Processor Support.
config BF526
bool "BF526"
help
BF526 Processor Support.
config BF527
bool "BF527"
help
BF527 Processor Support.
config BF531
bool "BF531"
help
BF531 Processor Support.
config BF532
bool "BF532"
help
BF532 Processor Support.
config BF533
bool "BF533"
help
BF533 Processor Support.
config BF534
bool "BF534"
help
BF534 Processor Support.
config BF536
bool "BF536"
help
BF536 Processor Support.
config BF537
bool "BF537"
help
BF537 Processor Support.
config BF542
bool "BF542"
help
BF542 Processor Support.
config BF544
bool "BF544"
help
BF544 Processor Support.
config BF547
bool "BF547"
help
BF547 Processor Support.
config BF548
bool "BF548"
help
BF548 Processor Support.
config BF549
bool "BF549"
help
BF549 Processor Support.
config BF561
bool "BF561"
help
BF561 Processor Support.
endchoice
config BF_REV_MIN
int
default 0 if (BF52x || BF54x)
default 2 if (BF537 || BF536 || BF534)
default 3 if (BF561 ||BF533 || BF532 || BF531)
config BF_REV_MAX
int
default 2 if (BF52x || BF54x)
default 3 if (BF537 || BF536 || BF534)
default 5 if (BF561)
default 6 if (BF533 || BF532 || BF531)
choice
prompt "Silicon Rev"
default BF_REV_0_1 if (BF52x || BF54x)
default BF_REV_0_2 if (BF534 || BF536 || BF537)
default BF_REV_0_3 if (BF531 || BF532 || BF533 || BF561)
config BF_REV_0_0
bool "0.0"
depends on (BF52x || BF54x)
config BF_REV_0_1
bool "0.1"
depends on (BF52x || BF54x)
config BF_REV_0_2
bool "0.2"
depends on (BF52x || BF537 || BF536 || BF534 || BF54x)
config BF_REV_0_3
bool "0.3"
depends on (BF561 || BF537 || BF536 || BF534 || BF533 || BF532 || BF531)
config BF_REV_0_4
bool "0.4"
depends on (BF561 || BF533 || BF532 || BF531)
config BF_REV_0_5
bool "0.5"
depends on (BF561 || BF533 || BF532 || BF531)
config BF_REV_0_6
bool "0.6"
depends on (BF533 || BF532 || BF531)
config BF_REV_ANY
bool "any"
config BF_REV_NONE
bool "none"
endchoice
config BF52x
bool
depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
default y
config BF53x
bool
depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
default y
config BF54x
bool
depends on (BF542 || BF544 || BF547 || BF548 || BF549)
default y
config MEM_GENERIC_BOARD
bool
depends on GENERIC_BOARD
default y
config MEM_MT48LC64M4A2FB_7E
bool
depends on (BFIN533_STAMP)
default y
config MEM_MT48LC16M16A2TG_75
bool
depends on (BFIN533_EZKIT || BFIN561_EZKIT \
|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
|| H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
default y
config MEM_MT48LC32M8A2_75
bool
depends on (BFIN537_STAMP || PNAV10)
default y
config MEM_MT48LC8M32B2B5_7
bool
depends on (BFIN561_BLUETECHNIX_CM)
default y
config MEM_MT48LC32M16A2TG_75
bool
depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP || BFIN526_EZBRD)
default y
source "arch/blackfin/mach-bf527/Kconfig"
source "arch/blackfin/mach-bf533/Kconfig"
source "arch/blackfin/mach-bf561/Kconfig"
source "arch/blackfin/mach-bf537/Kconfig"
source "arch/blackfin/mach-bf548/Kconfig"
menu "Board customizations"
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
config CMDLINE
string "Initial kernel command string"
depends on CMDLINE_BOOL
default "console=ttyBF0,57600"
help
If you don't have a boot loader capable of passing a command line string
to the kernel, you may specify one here. As a minimum, you should specify
the memory size and the root device (e.g., mem=8M, root=/dev/nfs).
config BOOT_LOAD
hex "Kernel load address for booting"
default "0x1000"
range 0x1000 0x20000000
help
This option allows you to set the load address of the kernel.
This can be useful if you are on a board which has a small amount
of memory or you wish to reserve some memory at the beginning of
the address space.
Note that you need to keep this value above 4k (0x1000) as this
memory region is used to capture NULL pointer references as well
as some core kernel functions.
config ROM_BASE
hex "Kernel ROM Base"
default "0x20040000"
range 0x20000000 0x20400000 if !(BF54x || BF561)
range 0x20000000 0x30000000 if (BF54x || BF561)
help
comment "Clock/PLL Setup"
config CLKIN_HZ
int "Frequency of the crystal on the board in Hz"
default "11059200" if BFIN533_STAMP
default "27000000" if BFIN533_EZKIT
default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
default "30000000" if BFIN561_EZKIT
default "24576000" if PNAV10
default "10000000" if BFIN532_IP0X
help
The frequency of CLKIN crystal oscillator on the board in Hz.
Warning: This value should match the crystal on the board. Otherwise,
peripherals won't work properly.
config BFIN_KERNEL_CLOCK
bool "Re-program Clocks while Kernel boots?"
default n
help
This option decides if kernel clocks are re-programed from the
bootloader settings. If the clocks are not set, the SDRAM settings
are also not changed, and the Bootloader does 100% of the hardware
configuration.
config PLL_BYPASS
bool "Bypass PLL"
depends on BFIN_KERNEL_CLOCK
default n
config CLKIN_HALF
bool "Half Clock In"
depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
default n
help
If this is set the clock will be divided by 2, before it goes to the PLL.
config VCO_MULT
int "VCO Multiplier"
depends on BFIN_KERNEL_CLOCK && (! PLL_BYPASS)
range 1 64
default "22" if BFIN533_EZKIT
default "45" if BFIN533_STAMP
default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
default "22" if BFIN533_BLUETECHNIX_CM
default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
default "20" if BFIN561_EZKIT
default "16" if (H8606_HVSISTEMAS || BLACKSTAMP || BFIN526_EZBRD)
help
This controls the frequency of the on-chip PLL. This can be between 1 and 64.
PLL Frequency = (Crystal Frequency) * (this setting)
choice
prompt "Core Clock Divider"
depends on BFIN_KERNEL_CLOCK
default CCLK_DIV_1
help
This sets the frequency of the core. It can be 1, 2, 4 or 8
Core Frequency = (PLL frequency) / (this setting)
config CCLK_DIV_1
bool "1"
config CCLK_DIV_2
bool "2"
config CCLK_DIV_4
bool "4"
config CCLK_DIV_8
bool "8"
endchoice
config SCLK_DIV
int "System Clock Divider"
depends on BFIN_KERNEL_CLOCK
range 1 15
default 5
help
This sets the frequency of the system clock (including SDRAM or DDR).
This can be between 1 and 15
System Clock = (PLL frequency) / (this setting)
choice
prompt "DDR SDRAM Chip Type"
depends on BFIN_KERNEL_CLOCK
depends on BF54x
default MEM_MT46V32M16_5B
config MEM_MT46V32M16_6T
bool "MT46V32M16_6T"
config MEM_MT46V32M16_5B
bool "MT46V32M16_5B"
endchoice
config MAX_MEM_SIZE
int "Max SDRAM Memory Size in MBytes"
depends on !MPU
default 512
help
This is the max memory size that the kernel will create CPLB
tables for. Your system will not be able to handle any more.
#
# Max & Min Speeds for various Chips
#
config MAX_VCO_HZ
int
default 600000000 if BF522
default 400000000 if BF523
default 400000000 if BF524
default 600000000 if BF525
default 400000000 if BF526
default 600000000 if BF527
default 400000000 if BF531
default 400000000 if BF532
default 750000000 if BF533
default 500000000 if BF534
default 400000000 if BF536
default 600000000 if BF537
default 533333333 if BF538
default 533333333 if BF539
default 600000000 if BF542
default 533333333 if BF544
default 600000000 if BF547
default 600000000 if BF548
default 533333333 if BF549
default 600000000 if BF561
config MIN_VCO_HZ
int
default 50000000
config MAX_SCLK_HZ
int
default 133333333
config MIN_SCLK_HZ
int
default 27000000
comment "Kernel Timer/Scheduler"
source kernel/Kconfig.hz
config GENERIC_TIME
bool "Generic time"
default y
config GENERIC_CLOCKEVENTS
bool "Generic clock events"
depends on GENERIC_TIME
default y
config CYCLES_CLOCKSOURCE
bool "Use 'CYCLES' as a clocksource (EXPERIMENTAL)"
depends on EXPERIMENTAL
depends on GENERIC_CLOCKEVENTS
depends on !BFIN_SCRATCH_REG_CYCLES
default n
help
If you say Y here, you will enable support for using the 'cycles'
registers as a clock source. Doing so means you will be unable to
safely write to the 'cycles' register during runtime. You will
still be able to read it (such as for performance monitoring), but
writing the registers will most likely crash the kernel.
source kernel/time/Kconfig
comment "Misc"
choice
prompt "Blackfin Exception Scratch Register"
default BFIN_SCRATCH_REG_RETN
help
Select the resource to reserve for the Exception handler:
- RETN: Non-Maskable Interrupt (NMI)
- RETE: Exception Return (JTAG/ICE)
- CYCLES: Performance counter
If you are unsure, please select "RETN".
config BFIN_SCRATCH_REG_RETN
bool "RETN"
help
Use the RETN register in the Blackfin exception handler
as a stack scratch register. This means you cannot
safely use NMI on the Blackfin while running Linux, but
you can debug the system with a JTAG ICE and use the
CYCLES performance registers.
If you are unsure, please select "RETN".
config BFIN_SCRATCH_REG_RETE
bool "RETE"
help
Use the RETE register in the Blackfin exception handler
as a stack scratch register. This means you cannot
safely use a JTAG ICE while debugging a Blackfin board,
but you can safely use the CYCLES performance registers
and the NMI.
If you are unsure, please select "RETN".
config BFIN_SCRATCH_REG_CYCLES
bool "CYCLES"
help
Use the CYCLES register in the Blackfin exception handler
as a stack scratch register. This means you cannot
safely use the CYCLES performance registers on a Blackfin
board at anytime, but you can debug the system with a JTAG
ICE and use the NMI.
If you are unsure, please select "RETN".
endchoice
endmenu
menu "Blackfin Kernel Optimizations"
comment "Memory Optimizations"
config I_ENTRY_L1
bool "Locate interrupt entry code in L1 Memory"
default y
help
If enabled, interrupt entry code (STORE/RESTORE CONTEXT) is linked
into L1 instruction memory. (less latency)
config EXCPT_IRQ_SYSC_L1
bool "Locate entire ASM lowlevel exception / interrupt - Syscall and CPLB handler code in L1 Memory"
default y
help
If enabled, the entire ASM lowlevel exception and interrupt entry code
(STORE/RESTORE CONTEXT) is linked into L1 instruction memory.
(less latency)
config DO_IRQ_L1
bool "Locate frequently called do_irq dispatcher function in L1 Memory"
default y
help
If enabled, the frequently called do_irq dispatcher function is linked
into L1 instruction memory. (less latency)
config CORE_TIMER_IRQ_L1
bool "Locate frequently called timer_interrupt() function in L1 Memory"
default y
help
If enabled, the frequently called timer_interrupt() function is linked
into L1 instruction memory. (less latency)
config IDLE_L1
bool "Locate frequently idle function in L1 Memory"
default y
help
If enabled, the frequently called idle function is linked
into L1 instruction memory. (less latency)
config SCHEDULE_L1
bool "Locate kernel schedule function in L1 Memory"
default y
help
If enabled, the frequently called kernel schedule is linked
into L1 instruction memory. (less latency)
config ARITHMETIC_OPS_L1
bool "Locate kernel owned arithmetic functions in L1 Memory"
default y
help
If enabled, arithmetic functions are linked
into L1 instruction memory. (less latency)
config ACCESS_OK_L1
bool "Locate access_ok function in L1 Memory"
default y
help
If enabled, the access_ok function is linked
into L1 instruction memory. (less latency)
config MEMSET_L1
bool "Locate memset function in L1 Memory"
default y
help
If enabled, the memset function is linked
into L1 instruction memory. (less latency)
config MEMCPY_L1
bool "Locate memcpy function in L1 Memory"
default y
help
If enabled, the memcpy function is linked
into L1 instruction memory. (less latency)
config SYS_BFIN_SPINLOCK_L1
bool "Locate sys_bfin_spinlock function in L1 Memory"
default y
help
If enabled, sys_bfin_spinlock function is linked
into L1 instruction memory. (less latency)
config IP_CHECKSUM_L1
bool "Locate IP Checksum function in L1 Memory"
default n
help
If enabled, the IP Checksum function is linked
into L1 instruction memory. (less latency)
config CACHELINE_ALIGNED_L1
bool "Locate cacheline_aligned data to L1 Data Memory"
default y if !BF54x
default n if BF54x
depends on !BF531
help
If enabled, cacheline_anligned data is linked
into L1 data memory. (less latency)
config SYSCALL_TAB_L1
bool "Locate Syscall Table L1 Data Memory"
default n
depends on !BF531
help
If enabled, the Syscall LUT is linked
into L1 data memory. (less latency)
config CPLB_SWITCH_TAB_L1
bool "Locate CPLB Switch Tables L1 Data Memory"
default n
depends on !BF531
help
If enabled, the CPLB Switch Tables are linked
into L1 data memory. (less latency)
config APP_STACK_L1
bool "Support locating application stack in L1 Scratch Memory"
default y
help
If enabled the application stack can be located in L1
scratch memory (less latency).
Currently only works with FLAT binaries.
comment "Speed Optimizations"
config BFIN_INS_LOWOVERHEAD
bool "ins[bwl] low overhead, higher interrupt latency"
default y
help
Reads on the Blackfin are speculative. In Blackfin terms, this means
they can be interrupted at any time (even after they have been issued
on to the external bus), and re-issued after the interrupt occurs.
For memory - this is not a big deal, since memory does not change if
it sees a read.
If a FIFO is sitting on the end of the read, it will see two reads,
when the core only sees one since the FIFO receives both the read
which is cancelled (and not delivered to the core) and the one which
is re-issued (which is delivered to the core).
To solve this, interrupts are turned off before reads occur to
I/O space. This option controls which the overhead/latency of
controlling interrupts during this time
"n" turns interrupts off every read
(higher overhead, but lower interrupt latency)
"y" turns interrupts off every loop
(low overhead, but longer interrupt latency)
default behavior is to leave this set to on (type "Y"). If you are experiencing
interrupt latency issues, it is safe and OK to turn this off.
endmenu
choice
prompt "Kernel executes from"
help
Choose the memory type that the kernel will be running in.
config RAMKERNEL
bool "RAM"
help
The kernel will be resident in RAM when running.
config ROMKERNEL
bool "ROM"
help
The kernel will be resident in FLASH/ROM when running.
endchoice
source "mm/Kconfig"
config BFIN_GPTIMERS
tristate "Enable Blackfin General Purpose Timers API"
default n
help
Enable support for the General Purpose Timers API. If you
are unsure, say N.
To compile this driver as a module, choose M here: the module
will be called gptimers.ko.
config BFIN_DMA_5XX
bool "Enable DMA Support"
depends on (BF52x || BF53x || BF561 || BF54x)
default y
help
DMA driver for BF5xx.
choice
prompt "Uncached SDRAM region"
default DMA_UNCACHED_1M
depends on BFIN_DMA_5XX
config DMA_UNCACHED_4M
bool "Enable 4M DMA region"
config DMA_UNCACHED_2M
bool "Enable 2M DMA region"
config DMA_UNCACHED_1M
bool "Enable 1M DMA region"
config DMA_UNCACHED_NONE
bool "Disable DMA region"
endchoice
comment "Cache Support"
config BFIN_ICACHE
bool "Enable ICACHE"
config BFIN_DCACHE
bool "Enable DCACHE"
config BFIN_DCACHE_BANKA
bool "Enable only 16k BankA DCACHE - BankB is SRAM"
depends on BFIN_DCACHE && !BF531
default n
config BFIN_ICACHE_LOCK
bool "Enable Instruction Cache Locking"
choice
prompt "Policy"
depends on BFIN_DCACHE
default BFIN_WB
config BFIN_WB
bool "Write back"
help
Write Back Policy:
Cached data will be written back to SDRAM only when needed.
This can give a nice increase in performance, but beware of
broken drivers that do not properly invalidate/flush their
cache.
Write Through Policy:
Cached data will always be written back to SDRAM when the
cache is updated. This is a completely safe setting, but
performance is worse than Write Back.
If you are unsure of the options and you want to be safe,
then go with Write Through.
config BFIN_WT
bool "Write through"
help
Write Back Policy:
Cached data will be written back to SDRAM only when needed.
This can give a nice increase in performance, but beware of
broken drivers that do not properly invalidate/flush their
cache.
Write Through Policy:
Cached data will always be written back to SDRAM when the
cache is updated. This is a completely safe setting, but
performance is worse than Write Back.
If you are unsure of the options and you want to be safe,
then go with Write Through.
endchoice
config BFIN_L2_CACHEABLE
bool "Cache L2 SRAM"
depends on (BFIN_DCACHE || BFIN_ICACHE) && (BF54x || BF561)
default n
help
Select to make L2 SRAM cacheable in L1 data and instruction cache.
config MPU
bool "Enable the memory protection unit (EXPERIMENTAL)"
default n
help
Use the processor's MPU to protect applications from accessing
memory they do not own. This comes at a performance penalty
and is recommended only for debugging.
comment "Asynchonous Memory Configuration"
menu "EBIU_AMGCTL Global Control"
config C_AMCKEN
bool "Enable CLKOUT"
default y
config C_CDPRIO
bool "DMA has priority over core for ext. accesses"
default n
config C_B0PEN
depends on BF561
bool "Bank 0 16 bit packing enable"
default y
config C_B1PEN
depends on BF561
bool "Bank 1 16 bit packing enable"
default y
config C_B2PEN
depends on BF561
bool "Bank 2 16 bit packing enable"
default y
config C_B3PEN
depends on BF561
bool "Bank 3 16 bit packing enable"
default n
choice
prompt"Enable Asynchonous Memory Banks"
default C_AMBEN_ALL
config C_AMBEN
bool "Disable All Banks"
config C_AMBEN_B0
bool "Enable Bank 0"
config C_AMBEN_B0_B1
bool "Enable Bank 0 & 1"
config C_AMBEN_B0_B1_B2
bool "Enable Bank 0 & 1 & 2"
config C_AMBEN_ALL
bool "Enable All Banks"
endchoice
endmenu
menu "EBIU_AMBCTL Control"
config BANK_0
hex "Bank 0"
default 0x7BB0
config BANK_1
hex "Bank 1"
default 0x7BB0
default 0x5558 if BF54x
config BANK_2
hex "Bank 2"
default 0x7BB0
config BANK_3
hex "Bank 3"
default 0x99B3
endmenu
config EBIU_MBSCTLVAL
hex "EBIU Bank Select Control Register"
depends on BF54x
default 0
config EBIU_MODEVAL
hex "Flash Memory Mode Control Register"
depends on BF54x
default 1
config EBIU_FCTLVAL
hex "Flash Memory Bank Control Register"
depends on BF54x
default 6
endmenu
#############################################################################
menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
config PCI
bool "PCI support"
depends on BROKEN
help
Support for PCI bus.
source "drivers/pci/Kconfig"
config HOTPLUG
bool "Support for hot-pluggable device"
help
Say Y here if you want to plug devices into your computer while
the system is running, and be able to use them quickly. In many
cases, the devices can likewise be unplugged at any time too.
One well known example of this is PCMCIA- or PC-cards, credit-card
size devices such as network cards, modems or hard drives which are
plugged into slots found on all modern laptop computers. Another
example, used on modern desktops as well as laptops, is USB.
Enable HOTPLUG and build a modular kernel. Get agent software
(from <http://linux-hotplug.sourceforge.net/>) and install it.
Then your kernel will automatically call out to a user mode "policy
agent" (/sbin/hotplug) to load modules and set up software needed
to use devices as you hotplug them.
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
endmenu
menu "Executable file formats"
source "fs/Kconfig.binfmt"
endmenu
menu "Power management options"
source "kernel/power/Kconfig"
config ARCH_SUSPEND_POSSIBLE
def_bool y
depends on !SMP
choice
prompt "Standby Power Saving Mode"
depends on PM
default PM_BFIN_SLEEP_DEEPER
config PM_BFIN_SLEEP_DEEPER
bool "Sleep Deeper"
help
Sleep "Deeper" Mode (High Power Savings) - This mode reduces dynamic
power dissipation by disabling the clock to the processor core (CCLK).
Furthermore, Standby sets the internal power supply voltage (VDDINT)
to 0.85 V to provide the greatest power savings, while preserving the
processor state.
The PLL and system clock (SCLK) continue to operate at a very low
frequency of about 3.3 MHz. To preserve data integrity in the SDRAM,
the SDRAM is put into Self Refresh Mode. Typically an external event
such as GPIO interrupt or RTC activity wakes up the processor.
Various Peripherals such as UART, SPORT, PPI may not function as
normal during Sleep Deeper, due to the reduced SCLK frequency.
When in the sleep mode, system DMA access to L1 memory is not supported.
If unsure, select "Sleep Deeper".
config PM_BFIN_SLEEP
bool "Sleep"
help
Sleep Mode (High Power Savings) - The sleep mode reduces power
dissipation by disabling the clock to the processor core (CCLK).
The PLL and system clock (SCLK), however, continue to operate in
this mode. Typically an external event or RTC activity will wake
up the processor. When in the sleep mode, system DMA access to L1
memory is not supported.
If unsure, select "Sleep Deeper".
endchoice
config PM_WAKEUP_BY_GPIO
bool "Allow Wakeup from Standby by GPIO"
config PM_WAKEUP_GPIO_NUMBER
int "GPIO number"
range 0 47
depends on PM_WAKEUP_BY_GPIO
default 2 if BFIN537_STAMP
choice
prompt "GPIO Polarity"
depends on PM_WAKEUP_BY_GPIO
default PM_WAKEUP_GPIO_POLAR_H
config PM_WAKEUP_GPIO_POLAR_H
bool "Active High"
config PM_WAKEUP_GPIO_POLAR_L
bool "Active Low"
config PM_WAKEUP_GPIO_POLAR_EDGE_F
bool "Falling EDGE"
config PM_WAKEUP_GPIO_POLAR_EDGE_R
bool "Rising EDGE"
config PM_WAKEUP_GPIO_POLAR_EDGE_B
bool "Both EDGE"
endchoice
comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
depends on PM
config PM_BFIN_WAKE_PH6
bool "Allow Wake-Up from on-chip PHY or PH6 GP"
depends on PM && (BF52x || BF534 || BF536 || BF537)
default n
help
Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
config PM_BFIN_WAKE_GP
bool "Allow Wake-Up from GPIOs"
depends on PM && BF54x
default n
help
Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
endmenu
menu "CPU Frequency scaling"
source "drivers/cpufreq/Kconfig"
config CPU_VOLTAGE
bool "CPU Voltage scaling"
depends on EXPERIMENTAL
depends on CPU_FREQ
default n
help
Say Y here if you want CPU voltage scaling according to the CPU frequency.
This option violates the PLL BYPASS recommendation in the Blackfin Processor
manuals. There is a theoretical risk that during VDDINT transitions
the PLL may unlock.
endmenu
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
source "arch/blackfin/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
source "lib/Kconfig"