Merge branch 'lkmm.2022.10.18c' into HEAD

lkmm.2022.10.18c: Linux-kernel memory model (LKMM) updates.
diff --git a/Documentation/RCU/arrayRCU.rst b/Documentation/RCU/arrayRCU.rst
deleted file mode 100644
index a5f2ff8..0000000
--- a/Documentation/RCU/arrayRCU.rst
+++ /dev/null
@@ -1,165 +0,0 @@
-.. _array_rcu_doc:
-
-Using RCU to Protect Read-Mostly Arrays
-=======================================
-
-Although RCU is more commonly used to protect linked lists, it can
-also be used to protect arrays.  Three situations are as follows:
-
-1.  :ref:`Hash Tables <hash_tables>`
-
-2.  :ref:`Static Arrays <static_arrays>`
-
-3.  :ref:`Resizable Arrays <resizable_arrays>`
-
-Each of these three situations involves an RCU-protected pointer to an
-array that is separately indexed.  It might be tempting to consider use
-of RCU to instead protect the index into an array, however, this use
-case is **not** supported.  The problem with RCU-protected indexes into
-arrays is that compilers can play way too many optimization games with
-integers, which means that the rules governing handling of these indexes
-are far more trouble than they are worth.  If RCU-protected indexes into
-arrays prove to be particularly valuable (which they have not thus far),
-explicit cooperation from the compiler will be required to permit them
-to be safely used.
-
-That aside, each of the three RCU-protected pointer situations are
-described in the following sections.
-
-.. _hash_tables:
-
-Situation 1: Hash Tables
-------------------------
-
-Hash tables are often implemented as an array, where each array entry
-has a linked-list hash chain.  Each hash chain can be protected by RCU
-as described in listRCU.rst.  This approach also applies to other
-array-of-list situations, such as radix trees.
-
-.. _static_arrays:
-
-Situation 2: Static Arrays
---------------------------
-
-Static arrays, where the data (rather than a pointer to the data) is
-located in each array element, and where the array is never resized,
-have not been used with RCU.  Rik van Riel recommends using seqlock in
-this situation, which would also have minimal read-side overhead as long
-as updates are rare.
-
-Quick Quiz:
-		Why is it so important that updates be rare when using seqlock?
-
-:ref:`Answer to Quick Quiz <answer_quick_quiz_seqlock>`
-
-.. _resizable_arrays:
-
-Situation 3: Resizable Arrays
-------------------------------
-
-Use of RCU for resizable arrays is demonstrated by the grow_ary()
-function formerly used by the System V IPC code.  The array is used
-to map from semaphore, message-queue, and shared-memory IDs to the data
-structure that represents the corresponding IPC construct.  The grow_ary()
-function does not acquire any locks; instead its caller must hold the
-ids->sem semaphore.
-
-The grow_ary() function, shown below, does some limit checks, allocates a
-new ipc_id_ary, copies the old to the new portion of the new, initializes
-the remainder of the new, updates the ids->entries pointer to point to
-the new array, and invokes ipc_rcu_putref() to free up the old array.
-Note that rcu_assign_pointer() is used to update the ids->entries pointer,
-which includes any memory barriers required on whatever architecture
-you are running on::
-
-	static int grow_ary(struct ipc_ids* ids, int newsize)
-	{
-		struct ipc_id_ary* new;
-		struct ipc_id_ary* old;
-		int i;
-		int size = ids->entries->size;
-
-		if(newsize > IPCMNI)
-			newsize = IPCMNI;
-		if(newsize <= size)
-			return newsize;
-
-		new = ipc_rcu_alloc(sizeof(struct kern_ipc_perm *)*newsize +
-				    sizeof(struct ipc_id_ary));
-		if(new == NULL)
-			return size;
-		new->size = newsize;
-		memcpy(new->p, ids->entries->p,
-		       sizeof(struct kern_ipc_perm *)*size +
-		       sizeof(struct ipc_id_ary));
-		for(i=size;i<newsize;i++) {
-			new->p[i] = NULL;
-		}
-		old = ids->entries;
-
-		/*
-		 * Use rcu_assign_pointer() to make sure the memcpyed
-		 * contents of the new array are visible before the new
-		 * array becomes visible.
-		 */
-		rcu_assign_pointer(ids->entries, new);
-
-		ipc_rcu_putref(old);
-		return newsize;
-	}
-
-The ipc_rcu_putref() function decrements the array's reference count
-and then, if the reference count has dropped to zero, uses call_rcu()
-to free the array after a grace period has elapsed.
-
-The array is traversed by the ipc_lock() function.  This function
-indexes into the array under the protection of rcu_read_lock(),
-using rcu_dereference() to pick up the pointer to the array so
-that it may later safely be dereferenced -- memory barriers are
-required on the Alpha CPU.  Since the size of the array is stored
-with the array itself, there can be no array-size mismatches, so
-a simple check suffices.  The pointer to the structure corresponding
-to the desired IPC object is placed in "out", with NULL indicating
-a non-existent entry.  After acquiring "out->lock", the "out->deleted"
-flag indicates whether the IPC object is in the process of being
-deleted, and, if not, the pointer is returned::
-
-	struct kern_ipc_perm* ipc_lock(struct ipc_ids* ids, int id)
-	{
-		struct kern_ipc_perm* out;
-		int lid = id % SEQ_MULTIPLIER;
-		struct ipc_id_ary* entries;
-
-		rcu_read_lock();
-		entries = rcu_dereference(ids->entries);
-		if(lid >= entries->size) {
-			rcu_read_unlock();
-			return NULL;
-		}
-		out = entries->p[lid];
-		if(out == NULL) {
-			rcu_read_unlock();
-			return NULL;
-		}
-		spin_lock(&out->lock);
-
-		/* ipc_rmid() may have already freed the ID while ipc_lock
-		 * was spinning: here verify that the structure is still valid
-		 */
-		if (out->deleted) {
-			spin_unlock(&out->lock);
-			rcu_read_unlock();
-			return NULL;
-		}
-		return out;
-	}
-
-.. _answer_quick_quiz_seqlock:
-
-Answer to Quick Quiz:
-	Why is it so important that updates be rare when using seqlock?
-
-	The reason that it is important that updates be rare when
-	using seqlock is that frequent updates can livelock readers.
-	One way to avoid this problem is to assign a seqlock for
-	each array entry rather than to the entire array.
diff --git a/Documentation/RCU/checklist.rst b/Documentation/RCU/checklist.rst
index 048c5bc..cc361fb 100644
--- a/Documentation/RCU/checklist.rst
+++ b/Documentation/RCU/checklist.rst
@@ -32,8 +32,8 @@
 	for lockless updates.  This does result in the mildly
 	counter-intuitive situation where rcu_read_lock() and
 	rcu_read_unlock() are used to protect updates, however, this
-	approach provides the same potential simplifications that garbage
-	collectors do.
+	approach can provide the same simplifications to certain types
+	of lockless algorithms that garbage collectors do.
 
 1.	Does the update code have proper mutual exclusion?
 
@@ -49,12 +49,12 @@
 	them -- even x86 allows later loads to be reordered to precede
 	earlier stores), and be prepared to explain why this added
 	complexity is worthwhile.  If you choose #c, be prepared to
-	explain how this single task does not become a major bottleneck on
-	big multiprocessor machines (for example, if the task is updating
-	information relating to itself that other tasks can read, there
-	by definition can be no bottleneck).  Note that the definition
-	of "large" has changed significantly:  Eight CPUs was "large"
-	in the year 2000, but a hundred CPUs was unremarkable in 2017.
+	explain how this single task does not become a major bottleneck
+	on large systems (for example, if the task is updating information
+	relating to itself that other tasks can read, there by definition
+	can be no bottleneck).	Note that the definition of "large" has
+	changed significantly:	Eight CPUs was "large" in the year 2000,
+	but a hundred CPUs was unremarkable in 2017.
 
 2.	Do the RCU read-side critical sections make proper use of
 	rcu_read_lock() and friends?  These primitives are needed
@@ -97,33 +97,38 @@
 
 	b.	Proceed as in (a) above, but also maintain per-element
 		locks (that are acquired by both readers and writers)
-		that guard per-element state.  Of course, fields that
-		the readers refrain from accessing can be guarded by
-		some other lock acquired only by updaters, if desired.
+		that guard per-element state.  Fields that the readers
+		refrain from accessing can be guarded by some other lock
+		acquired only by updaters, if desired.
 
-		This works quite well, also.
+		This also works quite well.
 
 	c.	Make updates appear atomic to readers.	For example,
 		pointer updates to properly aligned fields will
 		appear atomic, as will individual atomic primitives.
 		Sequences of operations performed under a lock will *not*
 		appear to be atomic to RCU readers, nor will sequences
-		of multiple atomic primitives.
+		of multiple atomic primitives.	One alternative is to
+		move multiple individual fields to a separate structure,
+		thus solving the multiple-field problem by imposing an
+		additional level of indirection.
 
 		This can work, but is starting to get a bit tricky.
 
-	d.	Carefully order the updates and the reads so that
-		readers see valid data at all phases of the update.
-		This is often more difficult than it sounds, especially
-		given modern CPUs' tendency to reorder memory references.
-		One must usually liberally sprinkle memory barriers
-		(smp_wmb(), smp_rmb(), smp_mb()) through the code,
-		making it difficult to understand and to test.
+	d.	Carefully order the updates and the reads so that readers
+		see valid data at all phases of the update.  This is often
+		more difficult than it sounds, especially given modern
+		CPUs' tendency to reorder memory references.  One must
+		usually liberally sprinkle memory-ordering operations
+		through the code, making it difficult to understand and
+		to test.  Where it works, it is better to use things
+		like smp_store_release() and smp_load_acquire(), but in
+		some cases the smp_mb() full memory barrier is required.
 
-		It is usually better to group the changing data into
-		a separate structure, so that the change may be made
-		to appear atomic by updating a pointer to reference
-		a new structure containing updated values.
+		As noted earlier, it is usually better to group the
+		changing data into a separate structure, so that the
+		change may be made to appear atomic by updating a pointer
+		to reference a new structure containing updated values.
 
 4.	Weakly ordered CPUs pose special challenges.  Almost all CPUs
 	are weakly ordered -- even x86 CPUs allow later loads to be
@@ -188,26 +193,29 @@
 		when publicizing a pointer to a structure that can
 		be traversed by an RCU read-side critical section.
 
-5.	If call_rcu() or call_srcu() is used, the callback function will
-	be called from softirq context.  In particular, it cannot block.
-	If you need the callback to block, run that code in a workqueue
-	handler scheduled from the callback.  The queue_rcu_work()
-	function does this for you in the case of call_rcu().
+5.	If any of call_rcu(), call_srcu(), call_rcu_tasks(),
+	call_rcu_tasks_rude(), or call_rcu_tasks_trace() is used,
+	the callback function may be invoked from softirq context,
+	and in any case with bottom halves disabled.  In particular,
+	this callback function cannot block.  If you need the callback
+	to block, run that code in a workqueue handler scheduled from
+	the callback.  The queue_rcu_work() function does this for you
+	in the case of call_rcu().
 
 6.	Since synchronize_rcu() can block, it cannot be called
 	from any sort of irq context.  The same rule applies
-	for synchronize_srcu(), synchronize_rcu_expedited(), and
-	synchronize_srcu_expedited().
+	for synchronize_srcu(), synchronize_rcu_expedited(),
+	synchronize_srcu_expedited(), synchronize_rcu_tasks(),
+	synchronize_rcu_tasks_rude(), and synchronize_rcu_tasks_trace().
 
 	The expedited forms of these primitives have the same semantics
-	as the non-expedited forms, but expediting is both expensive and
-	(with the exception of synchronize_srcu_expedited()) unfriendly
-	to real-time workloads.  Use of the expedited primitives should
-	be restricted to rare configuration-change operations that would
-	not normally be undertaken while a real-time workload is running.
-	However, real-time workloads can use rcupdate.rcu_normal kernel
-	boot parameter to completely disable expedited grace periods,
-	though this might have performance implications.
+	as the non-expedited forms, but expediting is more CPU intensive.
+	Use of the expedited primitives should be restricted to rare
+	configuration-change operations that would not normally be
+	undertaken while a real-time workload is running.  Note that
+	IPI-sensitive real-time workloads can use the rcupdate.rcu_normal
+	kernel boot parameter to completely disable expedited grace
+	periods, though this might have performance implications.
 
 	In particular, if you find yourself invoking one of the expedited
 	primitives repeatedly in a loop, please do everyone a favor:
@@ -215,8 +223,9 @@
 	a single non-expedited primitive to cover the entire batch.
 	This will very likely be faster than the loop containing the
 	expedited primitive, and will be much much easier on the rest
-	of the system, especially to real-time workloads running on
-	the rest of the system.
+	of the system, especially to real-time workloads running on the
+	rest of the system.  Alternatively, instead use asynchronous
+	primitives such as call_rcu().
 
 7.	As of v4.20, a given kernel implements only one RCU flavor, which
 	is RCU-sched for PREEMPTION=n and RCU-preempt for PREEMPTION=y.
@@ -239,7 +248,8 @@
 	the corresponding readers must use rcu_read_lock_trace() and
 	rcu_read_unlock_trace().  If an updater uses call_rcu_tasks_rude()
 	or synchronize_rcu_tasks_rude(), then the corresponding readers
-	must use anything that disables interrupts.
+	must use anything that disables preemption, for example,
+	preempt_disable() and preempt_enable().
 
 	Mixing things up will result in confusion and broken kernels, and
 	has even resulted in an exploitable security issue.  Therefore,
@@ -253,15 +263,16 @@
 	that this usage is safe is that readers can use anything that
 	disables BH when updaters use call_rcu() or synchronize_rcu().
 
-8.	Although synchronize_rcu() is slower than is call_rcu(), it
-	usually results in simpler code.  So, unless update performance is
-	critically important, the updaters cannot block, or the latency of
-	synchronize_rcu() is visible from userspace, synchronize_rcu()
-	should be used in preference to call_rcu().  Furthermore,
-	kfree_rcu() usually results in even simpler code than does
-	synchronize_rcu() without synchronize_rcu()'s multi-millisecond
-	latency.  So please take advantage of kfree_rcu()'s "fire and
-	forget" memory-freeing capabilities where it applies.
+8.	Although synchronize_rcu() is slower than is call_rcu(),
+	it usually results in simpler code.  So, unless update
+	performance is critically important, the updaters cannot block,
+	or the latency of synchronize_rcu() is visible from userspace,
+	synchronize_rcu() should be used in preference to call_rcu().
+	Furthermore, kfree_rcu() and kvfree_rcu() usually result
+	in even simpler code than does synchronize_rcu() without
+	synchronize_rcu()'s multi-millisecond latency.	So please take
+	advantage of kfree_rcu()'s and kvfree_rcu()'s "fire and forget"
+	memory-freeing capabilities where it applies.
 
 	An especially important property of the synchronize_rcu()
 	primitive is that it automatically self-limits: if grace periods
@@ -271,8 +282,8 @@
 	cases where grace periods are delayed, as failing to do so can
 	result in excessive realtime latencies or even OOM conditions.
 
-	Ways of gaining this self-limiting property when using call_rcu()
-	include:
+	Ways of gaining this self-limiting property when using call_rcu(),
+	kfree_rcu(), or kvfree_rcu() include:
 
 	a.	Keeping a count of the number of data-structure elements
 		used by the RCU-protected data structure, including
@@ -304,18 +315,21 @@
 		here is that superuser already has lots of ways to crash
 		the machine.
 
-	d.	Periodically invoke synchronize_rcu(), permitting a limited
-		number of updates per grace period.  Better yet, periodically
-		invoke rcu_barrier() to wait for all outstanding callbacks.
+	d.	Periodically invoke rcu_barrier(), permitting a limited
+		number of updates per grace period.
 
-	The same cautions apply to call_srcu() and kfree_rcu().
+	The same cautions apply to call_srcu(), call_rcu_tasks(),
+	call_rcu_tasks_rude(), and call_rcu_tasks_trace().  This is
+	why there is an srcu_barrier(), rcu_barrier_tasks(),
+	rcu_barrier_tasks_rude(), and rcu_barrier_tasks_rude(),
+	respectively.
 
-	Note that although these primitives do take action to avoid memory
-	exhaustion when any given CPU has too many callbacks, a determined
-	user could still exhaust memory.  This is especially the case
-	if a system with a large number of CPUs has been configured to
-	offload all of its RCU callbacks onto a single CPU, or if the
-	system has relatively little free memory.
+	Note that although these primitives do take action to avoid
+	memory exhaustion when any given CPU has too many callbacks,
+	a determined user or administrator can still exhaust memory.
+	This is especially the case if a system with a large number of
+	CPUs has been configured to offload all of its RCU callbacks onto
+	a single CPU, or if the system has relatively little free memory.
 
 9.	All RCU list-traversal primitives, which include
 	rcu_dereference(), list_for_each_entry_rcu(), and
@@ -344,14 +358,14 @@
 	and you don't hold the appropriate update-side lock, you *must*
 	use the "_rcu()" variants of the list macros.  Failing to do so
 	will break Alpha, cause aggressive compilers to generate bad code,
-	and confuse people trying to read your code.
+	and confuse people trying to understand your code.
 
 11.	Any lock acquired by an RCU callback must be acquired elsewhere
-	with softirq disabled, e.g., via spin_lock_irqsave(),
-	spin_lock_bh(), etc.  Failing to disable softirq on a given
-	acquisition of that lock will result in deadlock as soon as
-	the RCU softirq handler happens to run your RCU callback while
-	interrupting that acquisition's critical section.
+	with softirq disabled, e.g., via spin_lock_bh().  Failing to
+	disable softirq on a given acquisition of that lock will result
+	in deadlock as soon as the RCU softirq handler happens to run
+	your RCU callback while interrupting that acquisition's critical
+	section.
 
 12.	RCU callbacks can be and are executed in parallel.  In many cases,
 	the callback code simply wrappers around kfree(), so that this
@@ -372,7 +386,17 @@
 	for some  real-time workloads, this is the whole point of using
 	the rcu_nocbs= kernel boot parameter.
 
-13.	Unlike other forms of RCU, it *is* permissible to block in an
+	In addition, do not assume that callbacks queued in a given order
+	will be invoked in that order, even if they all are queued on the
+	same CPU.  Furthermore, do not assume that same-CPU callbacks will
+	be invoked serially.  For example, in recent kernels, CPUs can be
+	switched between offloaded and de-offloaded callback invocation,
+	and while a given CPU is undergoing such a switch, its callbacks
+	might be concurrently invoked by that CPU's softirq handler and
+	that CPU's rcuo kthread.  At such times, that CPU's callbacks
+	might be executed both concurrently and out of order.
+
+13.	Unlike most flavors of RCU, it *is* permissible to block in an
 	SRCU read-side critical section (demarked by srcu_read_lock()
 	and srcu_read_unlock()), hence the "SRCU": "sleepable RCU".
 	Please note that if you don't need to sleep in read-side critical
@@ -412,6 +436,12 @@
 	never sends IPIs to other CPUs, so it is easier on
 	real-time workloads than is synchronize_rcu_expedited().
 
+	It is also permissible to sleep in RCU Tasks Trace read-side
+	critical, which are delimited by rcu_read_lock_trace() and
+	rcu_read_unlock_trace().  However, this is a specialized flavor
+	of RCU, and you should not use it without first checking with
+	its current users.  In most cases, you should instead use SRCU.
+
 	Note that rcu_assign_pointer() relates to SRCU just as it does to
 	other forms of RCU, but instead of rcu_dereference() you should
 	use srcu_dereference() in order to avoid lockdep splats.
@@ -442,50 +472,62 @@
 	find problems as follows:
 
 	CONFIG_PROVE_LOCKING:
-		check that accesses to RCU-protected data
-		structures are carried out under the proper RCU
-		read-side critical section, while holding the right
-		combination of locks, or whatever other conditions
-		are appropriate.
+		check that accesses to RCU-protected data structures
+		are carried out under the proper RCU read-side critical
+		section, while holding the right combination of locks,
+		or whatever other conditions are appropriate.
 
 	CONFIG_DEBUG_OBJECTS_RCU_HEAD:
-		check that you don't pass the
-		same object to call_rcu() (or friends) before an RCU
-		grace period has elapsed since the last time that you
-		passed that same object to call_rcu() (or friends).
+		check that you don't pass the same object to call_rcu()
+		(or friends) before an RCU grace period has elapsed
+		since the last time that you passed that same object to
+		call_rcu() (or friends).
 
 	__rcu sparse checks:
-		tag the pointer to the RCU-protected data
-		structure with __rcu, and sparse will warn you if you
-		access that pointer without the services of one of the
-		variants of rcu_dereference().
+		tag the pointer to the RCU-protected data structure
+		with __rcu, and sparse will warn you if you access that
+		pointer without the services of one of the variants
+		of rcu_dereference().
 
 	These debugging aids can help you find problems that are
 	otherwise extremely difficult to spot.
 
-17.	If you register a callback using call_rcu() or call_srcu(), and
-	pass in a function defined within a loadable module, then it in
-	necessary to wait for all pending callbacks to be invoked after
-	the last invocation and before unloading that module.  Note that
-	it is absolutely *not* sufficient to wait for a grace period!
-	The current (say) synchronize_rcu() implementation is *not*
-	guaranteed to wait for callbacks registered on other CPUs.
-	Or even on the current CPU if that CPU recently went offline
-	and came back online.
+17.	If you pass a callback function defined within a module to one of
+	call_rcu(), call_srcu(), call_rcu_tasks(), call_rcu_tasks_rude(),
+	or call_rcu_tasks_trace(), then it is necessary to wait for all
+	pending callbacks to be invoked before unloading that module.
+	Note that it is absolutely *not* sufficient to wait for a grace
+	period!  For example, synchronize_rcu() implementation is *not*
+	guaranteed to wait for callbacks registered on other CPUs via
+	call_rcu().  Or even on the current CPU if that CPU recently
+	went offline and came back online.
 
 	You instead need to use one of the barrier functions:
 
 	-	call_rcu() -> rcu_barrier()
 	-	call_srcu() -> srcu_barrier()
+	-	call_rcu_tasks() -> rcu_barrier_tasks()
+	-	call_rcu_tasks_rude() -> rcu_barrier_tasks_rude()
+	-	call_rcu_tasks_trace() -> rcu_barrier_tasks_trace()
 
 	However, these barrier functions are absolutely *not* guaranteed
-	to wait for a grace period.  In fact, if there are no call_rcu()
-	callbacks waiting anywhere in the system, rcu_barrier() is within
-	its rights to return immediately.
+	to wait for a grace period.  For example, if there are no
+	call_rcu() callbacks queued anywhere in the system, rcu_barrier()
+	can and will return immediately.
 
-	So if you need to wait for both an RCU grace period and for
-	all pre-existing call_rcu() callbacks, you will need to execute
-	both rcu_barrier() and synchronize_rcu(), if necessary, using
-	something like workqueues to execute them concurrently.
+	So if you need to wait for both a grace period and for all
+	pre-existing callbacks, you will need to invoke both functions,
+	with the pair depending on the flavor of RCU:
+
+	-	Either synchronize_rcu() or synchronize_rcu_expedited(),
+		together with rcu_barrier()
+	-	Either synchronize_srcu() or synchronize_srcu_expedited(),
+		together with and srcu_barrier()
+	-	synchronize_rcu_tasks() and rcu_barrier_tasks()
+	-	synchronize_tasks_rude() and rcu_barrier_tasks_rude()
+	-	synchronize_tasks_trace() and rcu_barrier_tasks_trace()
+
+	If necessary, you can use something like workqueues to execute
+	the requisite pair of functions concurrently.
 
 	See rcubarrier.rst for more information.
diff --git a/Documentation/RCU/index.rst b/Documentation/RCU/index.rst
index e703d3d..84a7990 100644
--- a/Documentation/RCU/index.rst
+++ b/Documentation/RCU/index.rst
@@ -9,7 +9,6 @@
 .. toctree::
    :maxdepth: 3
 
-   arrayRCU
    checklist
    lockdep
    lockdep-splat
diff --git a/Documentation/RCU/listRCU.rst b/Documentation/RCU/listRCU.rst
index 2a643e2..bdc4bcc 100644
--- a/Documentation/RCU/listRCU.rst
+++ b/Documentation/RCU/listRCU.rst
@@ -3,11 +3,10 @@
 Using RCU to Protect Read-Mostly Linked Lists
 =============================================
 
-One of the best applications of RCU is to protect read-mostly linked lists
-(``struct list_head`` in list.h).  One big advantage of this approach
-is that all of the required memory barriers are included for you in
-the list macros.  This document describes several applications of RCU,
-with the best fits first.
+One of the most common uses of RCU is protecting read-mostly linked lists
+(``struct list_head`` in list.h).  One big advantage of this approach is
+that all of the required memory ordering is provided by the list macros.
+This document describes several list-based RCU use cases.
 
 
 Example 1: Read-mostly list: Deferred Destruction
@@ -35,7 +34,8 @@
 	}
 	rcu_read_unlock();
 
-The simplified code for removing a process from a task list is::
+The simplified and heavily inlined code for removing a process from a
+task list is::
 
 	void release_task(struct task_struct *p)
 	{
@@ -45,39 +45,48 @@
 		call_rcu(&p->rcu, delayed_put_task_struct);
 	}
 
-When a process exits, ``release_task()`` calls ``list_del_rcu(&p->tasks)`` under
-``tasklist_lock`` writer lock protection, to remove the task from the list of
-all tasks. The ``tasklist_lock`` prevents concurrent list additions/removals
-from corrupting the list. Readers using ``for_each_process()`` are not protected
-with the ``tasklist_lock``. To prevent readers from noticing changes in the list
-pointers, the ``task_struct`` object is freed only after one or more grace
-periods elapse (with the help of call_rcu()). This deferring of destruction
-ensures that any readers traversing the list will see valid ``p->tasks.next``
-pointers and deletion/freeing can happen in parallel with traversal of the list.
-This pattern is also called an **existence lock**, since RCU pins the object in
-memory until all existing readers finish.
+When a process exits, ``release_task()`` calls ``list_del_rcu(&p->tasks)``
+via __exit_signal() and __unhash_process() under ``tasklist_lock``
+writer lock protection.  The list_del_rcu() invocation removes
+the task from the list of all tasks. The ``tasklist_lock``
+prevents concurrent list additions/removals from corrupting the
+list. Readers using ``for_each_process()`` are not protected with the
+``tasklist_lock``. To prevent readers from noticing changes in the list
+pointers, the ``task_struct`` object is freed only after one or more
+grace periods elapse, with the help of call_rcu(), which is invoked via
+put_task_struct_rcu_user(). This deferring of destruction ensures that
+any readers traversing the list will see valid ``p->tasks.next`` pointers
+and deletion/freeing can happen in parallel with traversal of the list.
+This pattern is also called an **existence lock**, since RCU refrains
+from invoking the delayed_put_task_struct() callback function until
+all existing readers finish, which guarantees that the ``task_struct``
+object in question will remain in existence until after the completion
+of all RCU readers that might possibly have a reference to that object.
 
 
 Example 2: Read-Side Action Taken Outside of Lock: No In-Place Updates
 ----------------------------------------------------------------------
 
-The best applications are cases where, if reader-writer locking were
-used, the read-side lock would be dropped before taking any action
-based on the results of the search.  The most celebrated example is
-the routing table.  Because the routing table is tracking the state of
-equipment outside of the computer, it will at times contain stale data.
-Therefore, once the route has been computed, there is no need to hold
-the routing table static during transmission of the packet.  After all,
-you can hold the routing table static all you want, but that won't keep
-the external Internet from changing, and it is the state of the external
-Internet that really matters.  In addition, routing entries are typically
-added or deleted, rather than being modified in place.
+Some reader-writer locking use cases compute a value while holding
+the read-side lock, but continue to use that value after that lock is
+released.  These use cases are often good candidates for conversion
+to RCU.  One prominent example involves network packet routing.
+Because the packet-routing data tracks the state of equipment outside
+of the computer, it will at times contain stale data.  Therefore, once
+the route has been computed, there is no need to hold the routing table
+static during transmission of the packet.  After all, you can hold the
+routing table static all you want, but that won't keep the external
+Internet from changing, and it is the state of the external Internet
+that really matters.  In addition, routing entries are typically added
+or deleted, rather than being modified in place.  This is a rare example
+of the finite speed of light and the non-zero size of atoms actually
+helping make synchronization be lighter weight.
 
-A straightforward example of this use of RCU may be found in the
-system-call auditing support.  For example, a reader-writer locked
+A straightforward example of this type of RCU use case may be found in
+the system-call auditing support.  For example, a reader-writer locked
 implementation of ``audit_filter_task()`` might be as follows::
 
-	static enum audit_state audit_filter_task(struct task_struct *tsk)
+	static enum audit_state audit_filter_task(struct task_struct *tsk, char **key)
 	{
 		struct audit_entry *e;
 		enum audit_state   state;
@@ -86,6 +95,8 @@
 		/* Note: audit_filter_mutex held by caller. */
 		list_for_each_entry(e, &audit_tsklist, list) {
 			if (audit_filter_rules(tsk, &e->rule, NULL, &state)) {
+				if (state == AUDIT_STATE_RECORD)
+					*key = kstrdup(e->rule.filterkey, GFP_ATOMIC);
 				read_unlock(&auditsc_lock);
 				return state;
 			}
@@ -101,7 +112,7 @@
 
 This means that RCU can be easily applied to the read side, as follows::
 
-	static enum audit_state audit_filter_task(struct task_struct *tsk)
+	static enum audit_state audit_filter_task(struct task_struct *tsk, char **key)
 	{
 		struct audit_entry *e;
 		enum audit_state   state;
@@ -110,6 +121,8 @@
 		/* Note: audit_filter_mutex held by caller. */
 		list_for_each_entry_rcu(e, &audit_tsklist, list) {
 			if (audit_filter_rules(tsk, &e->rule, NULL, &state)) {
+				if (state == AUDIT_STATE_RECORD)
+					*key = kstrdup(e->rule.filterkey, GFP_ATOMIC);
 				rcu_read_unlock();
 				return state;
 			}
@@ -118,13 +131,15 @@
 		return AUDIT_BUILD_CONTEXT;
 	}
 
-The ``read_lock()`` and ``read_unlock()`` calls have become rcu_read_lock()
-and rcu_read_unlock(), respectively, and the list_for_each_entry() has
-become list_for_each_entry_rcu().  The **_rcu()** list-traversal primitives
-insert the read-side memory barriers that are required on DEC Alpha CPUs.
+The read_lock() and read_unlock() calls have become rcu_read_lock()
+and rcu_read_unlock(), respectively, and the list_for_each_entry()
+has become list_for_each_entry_rcu().  The **_rcu()** list-traversal
+primitives add READ_ONCE() and diagnostic checks for incorrect use
+outside of an RCU read-side critical section.
 
 The changes to the update side are also straightforward. A reader-writer lock
-might be used as follows for deletion and insertion::
+might be used as follows for deletion and insertion in these simplified
+versions of audit_del_rule() and audit_add_rule()::
 
 	static inline int audit_del_rule(struct audit_rule *rule,
 					 struct list_head *list)
@@ -188,16 +203,16 @@
 		return 0;
 	}
 
-Normally, the ``write_lock()`` and ``write_unlock()`` would be replaced by a
+Normally, the write_lock() and write_unlock() would be replaced by a
 spin_lock() and a spin_unlock(). But in this case, all callers hold
 ``audit_filter_mutex``, so no additional locking is required. The
-``auditsc_lock`` can therefore be eliminated, since use of RCU eliminates the
+auditsc_lock can therefore be eliminated, since use of RCU eliminates the
 need for writers to exclude readers.
 
 The list_del(), list_add(), and list_add_tail() primitives have been
 replaced by list_del_rcu(), list_add_rcu(), and list_add_tail_rcu().
-The **_rcu()** list-manipulation primitives add memory barriers that are needed on
-weakly ordered CPUs (most of them!).  The list_del_rcu() primitive omits the
+The **_rcu()** list-manipulation primitives add memory barriers that are
+needed on weakly ordered CPUs.  The list_del_rcu() primitive omits the
 pointer poisoning debug-assist code that would otherwise cause concurrent
 readers to fail spectacularly.
 
@@ -238,7 +253,9 @@
 The RCU version creates a copy, updates the copy, then replaces the old
 entry with the newly updated entry.  This sequence of actions, allowing
 concurrent reads while making a copy to perform an update, is what gives
-RCU (*read-copy update*) its name.  The RCU code is as follows::
+RCU (*read-copy update*) its name.
+
+The RCU version of audit_upd_rule() is as follows::
 
 	static inline int audit_upd_rule(struct audit_rule *rule,
 					 struct list_head *list,
@@ -267,6 +284,9 @@
 Again, this assumes that the caller holds ``audit_filter_mutex``.  Normally, the
 writer lock would become a spinlock in this sort of code.
 
+The update_lsm_rule() does something very similar, for those who would
+prefer to look at real Linux-kernel code.
+
 Another use of this pattern can be found in the openswitch driver's *connection
 tracking table* code in ``ct_limit_set()``.  The table holds connection tracking
 entries and has a limit on the maximum entries.  There is one such table
@@ -281,9 +301,10 @@
 ---------------------------------
 
 The auditing example above tolerates stale data, as do most algorithms
-that are tracking external state.  Because there is a delay from the
-time the external state changes before Linux becomes aware of the change,
-additional RCU-induced staleness is generally not a problem.
+that are tracking external state.  After all, given there is a delay
+from the time the external state changes before Linux becomes aware
+of the change, and so as noted earlier, a small quantity of additional
+RCU-induced staleness is generally not a problem.
 
 However, there are many examples where stale data cannot be tolerated.
 One example in the Linux kernel is the System V IPC (see the shm_lock()
@@ -302,7 +323,7 @@
 
 If the system-call audit module were to ever need to reject stale data, one way
 to accomplish this would be to add a ``deleted`` flag and a ``lock`` spinlock to the
-audit_entry structure, and modify ``audit_filter_task()`` as follows::
+``audit_entry`` structure, and modify audit_filter_task() as follows::
 
 	static enum audit_state audit_filter_task(struct task_struct *tsk)
 	{
@@ -319,6 +340,8 @@
 					return AUDIT_BUILD_CONTEXT;
 				}
 				rcu_read_unlock();
+				if (state == AUDIT_STATE_RECORD)
+					*key = kstrdup(e->rule.filterkey, GFP_ATOMIC);
 				return state;
 			}
 		}
@@ -326,12 +349,6 @@
 		return AUDIT_BUILD_CONTEXT;
 	}
 
-Note that this example assumes that entries are only added and deleted.
-Additional mechanism is required to deal correctly with the update-in-place
-performed by ``audit_upd_rule()``.  For one thing, ``audit_upd_rule()`` would
-need additional memory barriers to ensure that the list_add_rcu() was really
-executed before the list_del_rcu().
-
 The ``audit_del_rule()`` function would need to set the ``deleted`` flag under the
 spinlock as follows::
 
@@ -357,24 +374,32 @@
 
 This too assumes that the caller holds ``audit_filter_mutex``.
 
+Note that this example assumes that entries are only added and deleted.
+Additional mechanism is required to deal correctly with the update-in-place
+performed by audit_upd_rule().  For one thing, audit_upd_rule() would
+need to hold the locks of both the old ``audit_entry`` and its replacement
+while executing the list_replace_rcu().
+
 
 Example 5: Skipping Stale Objects
 ---------------------------------
 
-For some usecases, reader performance can be improved by skipping stale objects
-during read-side list traversal if the object in concern is pending destruction
-after one or more grace periods. One such example can be found in the timerfd
-subsystem. When a ``CLOCK_REALTIME`` clock is reprogrammed - for example due to
-setting of the system time, then all programmed timerfds that depend on this
-clock get triggered and processes waiting on them to expire are woken up in
-advance of their scheduled expiry. To facilitate this, all such timers are added
-to an RCU-managed ``cancel_list`` when they are setup in
+For some use cases, reader performance can be improved by skipping
+stale objects during read-side list traversal, where stale objects
+are those that will be removed and destroyed after one or more grace
+periods. One such example can be found in the timerfd subsystem. When a
+``CLOCK_REALTIME`` clock is reprogrammed (for example due to setting
+of the system time) then all programmed ``timerfds`` that depend on
+this clock get triggered and processes waiting on them are awakened in
+advance of their scheduled expiry. To facilitate this, all such timers
+are added to an RCU-managed ``cancel_list`` when they are setup in
 ``timerfd_setup_cancel()``::
 
 	static void timerfd_setup_cancel(struct timerfd_ctx *ctx, int flags)
 	{
 		spin_lock(&ctx->cancel_lock);
-		if ((ctx->clockid == CLOCK_REALTIME &&
+		if ((ctx->clockid == CLOCK_REALTIME ||
+		     ctx->clockid == CLOCK_REALTIME_ALARM) &&
 		    (flags & TFD_TIMER_ABSTIME) && (flags & TFD_TIMER_CANCEL_ON_SET)) {
 			if (!ctx->might_cancel) {
 				ctx->might_cancel = true;
@@ -382,13 +407,16 @@
 				list_add_rcu(&ctx->clist, &cancel_list);
 				spin_unlock(&cancel_lock);
 			}
+		} else {
+			__timerfd_remove_cancel(ctx);
 		}
 		spin_unlock(&ctx->cancel_lock);
 	}
 
-When a timerfd is freed (fd is closed), then the ``might_cancel`` flag of the
-timerfd object is cleared, the object removed from the ``cancel_list`` and
-destroyed::
+When a timerfd is freed (fd is closed), then the ``might_cancel``
+flag of the timerfd object is cleared, the object removed from the
+``cancel_list`` and destroyed, as shown in this simplified and inlined
+version of timerfd_release()::
 
 	int timerfd_release(struct inode *inode, struct file *file)
 	{
@@ -403,7 +431,10 @@
 		}
 		spin_unlock(&ctx->cancel_lock);
 
-		hrtimer_cancel(&ctx->t.tmr);
+		if (isalarm(ctx))
+			alarm_cancel(&ctx->t.alarm);
+		else
+			hrtimer_cancel(&ctx->t.tmr);
 		kfree_rcu(ctx, rcu);
 		return 0;
 	}
@@ -416,6 +447,7 @@
 
 	void timerfd_clock_was_set(void)
 	{
+		ktime_t moffs = ktime_mono_to_real(0);
 		struct timerfd_ctx *ctx;
 		unsigned long flags;
 
@@ -424,7 +456,7 @@
 			if (!ctx->might_cancel)
 				continue;
 			spin_lock_irqsave(&ctx->wqh.lock, flags);
-			if (ctx->moffs != ktime_mono_to_real(0)) {
+			if (ctx->moffs != moffs) {
 				ctx->moffs = KTIME_MAX;
 				ctx->ticks++;
 				wake_up_locked_poll(&ctx->wqh, EPOLLIN);
@@ -434,10 +466,10 @@
 		rcu_read_unlock();
 	}
 
-The key point here is, because RCU-traversal of the ``cancel_list`` happens
-while objects are being added and removed to the list, sometimes the traversal
-can step on an object that has been removed from the list. In this example, it
-is seen that it is better to skip such objects using a flag.
+The key point is that because RCU-protected traversal of the
+``cancel_list`` happens concurrently with object addition and removal,
+sometimes the traversal can access an object that has been removed from
+the list. In this example, a flag is used to skip such objects.
 
 
 Summary
diff --git a/Documentation/RCU/lockdep.rst b/Documentation/RCU/lockdep.rst
index a94f559..9308f1b 100644
--- a/Documentation/RCU/lockdep.rst
+++ b/Documentation/RCU/lockdep.rst
@@ -17,7 +17,9 @@
 	rcu_read_lock_held() for normal RCU.
 	rcu_read_lock_bh_held() for RCU-bh.
 	rcu_read_lock_sched_held() for RCU-sched.
+	rcu_read_lock_any_held() for any of normal RCU, RCU-bh, and RCU-sched.
 	srcu_read_lock_held() for SRCU.
+	rcu_read_lock_trace_held() for RCU Tasks Trace.
 
 These functions are conservative, and will therefore return 1 if they
 aren't certain (for example, if CONFIG_DEBUG_LOCK_ALLOC is not set).
@@ -53,6 +55,8 @@
 		is invoked by both SRCU readers and updaters.
 	rcu_dereference_raw(p):
 		Don't check.  (Use sparingly, if at all.)
+	rcu_dereference_raw_check(p):
+		Don't do lockdep at all.  (Use sparingly, if at all.)
 	rcu_dereference_protected(p, c):
 		Use explicit check expression "c", and omit all barriers
 		and compiler constraints.  This is useful when the data
diff --git a/arch/Kconfig b/arch/Kconfig
index 8f138e5..6b95244 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -468,6 +468,9 @@
 config ARCH_HAVE_NMI_SAFE_CMPXCHG
 	bool
 
+config ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
+	bool
+
 config HAVE_ALIGNED_STRUCT_PAGE
 	bool
 	help
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 505c8a1..099ee81 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -31,6 +31,7 @@
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_KEEPINITRD
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PTE_DEVMAP
 	select ARCH_HAS_PTE_SPECIAL
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
index 903096b..386adde 100644
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -10,6 +10,7 @@
 	select ARCH_ENABLE_MEMORY_HOTPLUG
 	select ARCH_ENABLE_MEMORY_HOTREMOVE
 	select ARCH_HAS_ACPI_TABLE_UPGRADE	if ACPI
+	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_INLINE_READ_LOCK if !PREEMPTION
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 318fce7..0acdfda 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -73,6 +73,7 @@
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_KCOV
 	select ARCH_HAS_MEM_ENCRYPT
+	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_SCALED_CPUTIME
 	select ARCH_HAS_SET_MEMORY
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6d1879e..bcb3190 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -81,6 +81,7 @@
 	select ARCH_HAS_KCOV			if X86_64
 	select ARCH_HAS_MEM_ENCRYPT
 	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NMI_SAFE_THIS_CPU_OPS
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PMEM_API		if X86_64
 	select ARCH_HAS_PTE_DEVMAP		if X86_64
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 6995c89..ac5ff07 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -312,7 +312,7 @@
 	 * Ensure that all tasks observe the host state change before the
 	 * host_failed change.
 	 */
-	call_rcu(&scmd->rcu, scsi_eh_inc_host_failed);
+	call_rcu_hurry(&scmd->rcu, scsi_eh_inc_host_failed);
 }
 
 /**
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 32f259f..381b92d 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -416,7 +416,7 @@
 	 */
 	if (!context_tracking_guest_enter()) {
 		instrumentation_begin();
-		rcu_virt_note_context_switch(smp_processor_id());
+		rcu_virt_note_context_switch();
 		instrumentation_end();
 	}
 }
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 08605ce..4da98ca 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -108,6 +108,15 @@
 
 #endif /* #else #ifdef CONFIG_PREEMPT_RCU */
 
+#ifdef CONFIG_RCU_LAZY
+void call_rcu_hurry(struct rcu_head *head, rcu_callback_t func);
+#else
+static inline void call_rcu_hurry(struct rcu_head *head, rcu_callback_t func)
+{
+	call_rcu(head, func);
+}
+#endif
+
 /* Internal to kernel */
 void rcu_init(void);
 extern int rcu_scheduler_active;
@@ -340,6 +349,11 @@
 	return !preemptible();
 }
 
+static inline int debug_lockdep_rcu_enabled(void)
+{
+	return 0;
+}
+
 #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
 
 #ifdef CONFIG_PROVE_RCU
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
index 768196a..68f9070 100644
--- a/include/linux/rcutiny.h
+++ b/include/linux/rcutiny.h
@@ -142,23 +142,17 @@
  * Take advantage of the fact that there is only one CPU, which
  * allows us to ignore virtualization-based context switches.
  */
-static inline void rcu_virt_note_context_switch(int cpu) { }
+static inline void rcu_virt_note_context_switch(void) { }
 static inline void rcu_cpu_stall_reset(void) { }
 static inline int rcu_jiffies_till_stall_check(void) { return 21 * HZ; }
 static inline void rcu_irq_exit_check_preempt(void) { }
-#define rcu_is_idle_cpu(cpu) \
-	(is_idle_task(current) && !in_nmi() && !in_hardirq() && !in_serving_softirq())
 static inline void exit_rcu(void) { }
 static inline bool rcu_preempt_need_deferred_qs(struct task_struct *t)
 {
 	return false;
 }
 static inline void rcu_preempt_deferred_qs(struct task_struct *t) { }
-#ifdef CONFIG_SRCU
 void rcu_scheduler_starting(void);
-#else /* #ifndef CONFIG_SRCU */
-static inline void rcu_scheduler_starting(void) { }
-#endif /* #else #ifndef CONFIG_SRCU */
 static inline void rcu_end_inkernel_boot(void) { }
 static inline bool rcu_inkernel_boot_has_ended(void) { return true; }
 static inline bool rcu_is_watching(void) { return true; }
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index 5efb514..4003bf6 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -27,7 +27,7 @@
  * wrapper around rcu_note_context_switch(), which allows TINY_RCU
  * to save a few bytes. The caller must have disabled interrupts.
  */
-static inline void rcu_virt_note_context_switch(int cpu)
+static inline void rcu_virt_note_context_switch(void)
 {
 	rcu_note_context_switch(false);
 }
@@ -87,8 +87,6 @@
 void cond_synchronize_rcu(unsigned long oldstate);
 void cond_synchronize_rcu_full(struct rcu_gp_oldstate *rgosp);
 
-bool rcu_is_idle_cpu(int cpu);
-
 #ifdef CONFIG_PROVE_RCU
 void rcu_irq_exit_check_preempt(void);
 #else
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 90877fc..487418c 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -76,6 +76,17 @@
  * rcu_read_lock before reading the address, then rcu_read_unlock after
  * taking the spinlock within the structure expected at that address.
  *
+ * Note that it is not possible to acquire a lock within a structure
+ * allocated with SLAB_TYPESAFE_BY_RCU without first acquiring a reference
+ * as described above.  The reason is that SLAB_TYPESAFE_BY_RCU pages
+ * are not zeroed before being given to the slab, which means that any
+ * locks must be initialized after each and every kmem_struct_alloc().
+ * Alternatively, make the ctor passed to kmem_cache_create() initialize
+ * the locks at page-allocation time, as is done in __i915_request_ctor(),
+ * sighand_ctor(), and anon_vma_ctor().  Such a ctor permits readers
+ * to safely acquire those ctor-initialized locks under rcu_read_lock()
+ * protection.
+ *
  * Note that SLAB_TYPESAFE_BY_RCU was originally named SLAB_DESTROY_BY_RCU.
  */
 /* Defer freeing slabs to RCU */
diff --git a/include/linux/srcu.h b/include/linux/srcu.h
index 01226e4..9b9d0bb 100644
--- a/include/linux/srcu.h
+++ b/include/linux/srcu.h
@@ -47,11 +47,8 @@
 #include <linux/srcutiny.h>
 #elif defined(CONFIG_TREE_SRCU)
 #include <linux/srcutree.h>
-#elif defined(CONFIG_SRCU)
-#error "Unknown SRCU implementation specified to kernel configuration"
 #else
-/* Dummy definition for things like notifiers.  Actual use gets link error. */
-struct srcu_struct { };
+#error "Unknown SRCU implementation specified to kernel configuration"
 #endif
 
 void call_srcu(struct srcu_struct *ssp, struct rcu_head *head,
@@ -64,11 +61,21 @@
 unsigned long start_poll_synchronize_srcu(struct srcu_struct *ssp);
 bool poll_state_synchronize_srcu(struct srcu_struct *ssp, unsigned long cookie);
 
-#ifdef CONFIG_SRCU
+#ifdef CONFIG_NEED_SRCU_NMI_SAFE
+int __srcu_read_lock_nmisafe(struct srcu_struct *ssp) __acquires(ssp);
+void __srcu_read_unlock_nmisafe(struct srcu_struct *ssp, int idx) __releases(ssp);
+#else
+static inline int __srcu_read_lock_nmisafe(struct srcu_struct *ssp)
+{
+	return __srcu_read_lock(ssp);
+}
+static inline void __srcu_read_unlock_nmisafe(struct srcu_struct *ssp, int idx)
+{
+	__srcu_read_unlock(ssp, idx);
+}
+#endif /* CONFIG_NEED_SRCU_NMI_SAFE */
+
 void srcu_init(void);
-#else /* #ifdef CONFIG_SRCU */
-static inline void srcu_init(void) { }
-#endif /* #else #ifdef CONFIG_SRCU */
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 
@@ -104,6 +111,18 @@
 
 #endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
 
+#define SRCU_NMI_UNKNOWN	0x0
+#define SRCU_NMI_UNSAFE		0x1
+#define SRCU_NMI_SAFE		0x2
+
+#if defined(CONFIG_PROVE_RCU) && defined(CONFIG_TREE_SRCU)
+void srcu_check_nmi_safety(struct srcu_struct *ssp, bool nmi_safe);
+#else
+static inline void srcu_check_nmi_safety(struct srcu_struct *ssp,
+					 bool nmi_safe) { }
+#endif
+
+
 /**
  * srcu_dereference_check - fetch SRCU-protected pointer for later dereferencing
  * @p: the pointer to fetch and protect for later dereferencing
@@ -161,17 +180,36 @@
 {
 	int retval;
 
+	srcu_check_nmi_safety(ssp, false);
 	retval = __srcu_read_lock(ssp);
 	rcu_lock_acquire(&(ssp)->dep_map);
 	return retval;
 }
 
+/**
+ * srcu_read_lock_nmisafe - register a new reader for an SRCU-protected structure.
+ * @ssp: srcu_struct in which to register the new reader.
+ *
+ * Enter an SRCU read-side critical section, but in an NMI-safe manner.
+ * See srcu_read_lock() for more information.
+ */
+static inline int srcu_read_lock_nmisafe(struct srcu_struct *ssp) __acquires(ssp)
+{
+	int retval;
+
+	srcu_check_nmi_safety(ssp, true);
+	retval = __srcu_read_lock_nmisafe(ssp);
+	rcu_lock_acquire(&(ssp)->dep_map);
+	return retval;
+}
+
 /* Used by tracing, cannot be traced and cannot invoke lockdep. */
 static inline notrace int
 srcu_read_lock_notrace(struct srcu_struct *ssp) __acquires(ssp)
 {
 	int retval;
 
+	srcu_check_nmi_safety(ssp, false);
 	retval = __srcu_read_lock(ssp);
 	return retval;
 }
@@ -187,14 +225,32 @@
 	__releases(ssp)
 {
 	WARN_ON_ONCE(idx & ~0x1);
+	srcu_check_nmi_safety(ssp, false);
 	rcu_lock_release(&(ssp)->dep_map);
 	__srcu_read_unlock(ssp, idx);
 }
 
+/**
+ * srcu_read_unlock_nmisafe - unregister a old reader from an SRCU-protected structure.
+ * @ssp: srcu_struct in which to unregister the old reader.
+ * @idx: return value from corresponding srcu_read_lock().
+ *
+ * Exit an SRCU read-side critical section, but in an NMI-safe manner.
+ */
+static inline void srcu_read_unlock_nmisafe(struct srcu_struct *ssp, int idx)
+	__releases(ssp)
+{
+	WARN_ON_ONCE(idx & ~0x1);
+	srcu_check_nmi_safety(ssp, true);
+	rcu_lock_release(&(ssp)->dep_map);
+	__srcu_read_unlock_nmisafe(ssp, idx);
+}
+
 /* Used by tracing, cannot be traced and cannot call lockdep. */
 static inline notrace void
 srcu_read_unlock_notrace(struct srcu_struct *ssp, int idx) __releases(ssp)
 {
+	srcu_check_nmi_safety(ssp, false);
 	__srcu_read_unlock(ssp, idx);
 }
 
diff --git a/include/linux/srcutree.h b/include/linux/srcutree.h
index e301431..c689a81 100644
--- a/include/linux/srcutree.h
+++ b/include/linux/srcutree.h
@@ -23,8 +23,9 @@
  */
 struct srcu_data {
 	/* Read-side state. */
-	unsigned long srcu_lock_count[2];	/* Locks per CPU. */
-	unsigned long srcu_unlock_count[2];	/* Unlocks per CPU. */
+	atomic_long_t srcu_lock_count[2];	/* Locks per CPU. */
+	atomic_long_t srcu_unlock_count[2];	/* Unlocks per CPU. */
+	int srcu_nmi_safety;			/* NMI-safe srcu_struct structure? */
 
 	/* Update-side state. */
 	spinlock_t __private lock ____cacheline_internodealigned_in_smp;
diff --git a/kernel/kcsan/core.c b/kernel/kcsan/core.c
index fe12dfe..54d077e 100644
--- a/kernel/kcsan/core.c
+++ b/kernel/kcsan/core.c
@@ -14,10 +14,12 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
+#include <linux/minmax.h>
 #include <linux/moduleparam.h>
 #include <linux/percpu.h>
 #include <linux/preempt.h>
 #include <linux/sched.h>
+#include <linux/string.h>
 #include <linux/uaccess.h>
 
 #include "encoding.h"
@@ -1308,3 +1310,51 @@
 	}
 }
 EXPORT_SYMBOL(__tsan_atomic_signal_fence);
+
+#ifdef __HAVE_ARCH_MEMSET
+void *__tsan_memset(void *s, int c, size_t count);
+noinline void *__tsan_memset(void *s, int c, size_t count)
+{
+	/*
+	 * Instead of not setting up watchpoints where accessed size is greater
+	 * than MAX_ENCODABLE_SIZE, truncate checked size to MAX_ENCODABLE_SIZE.
+	 */
+	size_t check_len = min_t(size_t, count, MAX_ENCODABLE_SIZE);
+
+	check_access(s, check_len, KCSAN_ACCESS_WRITE, _RET_IP_);
+	return memset(s, c, count);
+}
+#else
+void *__tsan_memset(void *s, int c, size_t count) __alias(memset);
+#endif
+EXPORT_SYMBOL(__tsan_memset);
+
+#ifdef __HAVE_ARCH_MEMMOVE
+void *__tsan_memmove(void *dst, const void *src, size_t len);
+noinline void *__tsan_memmove(void *dst, const void *src, size_t len)
+{
+	size_t check_len = min_t(size_t, len, MAX_ENCODABLE_SIZE);
+
+	check_access(dst, check_len, KCSAN_ACCESS_WRITE, _RET_IP_);
+	check_access(src, check_len, 0, _RET_IP_);
+	return memmove(dst, src, len);
+}
+#else
+void *__tsan_memmove(void *dst, const void *src, size_t len) __alias(memmove);
+#endif
+EXPORT_SYMBOL(__tsan_memmove);
+
+#ifdef __HAVE_ARCH_MEMCPY
+void *__tsan_memcpy(void *dst, const void *src, size_t len);
+noinline void *__tsan_memcpy(void *dst, const void *src, size_t len)
+{
+	size_t check_len = min_t(size_t, len, MAX_ENCODABLE_SIZE);
+
+	check_access(dst, check_len, KCSAN_ACCESS_WRITE, _RET_IP_);
+	check_access(src, check_len, 0, _RET_IP_);
+	return memcpy(dst, src, len);
+}
+#else
+void *__tsan_memcpy(void *dst, const void *src, size_t len) __alias(memcpy);
+#endif
+EXPORT_SYMBOL(__tsan_memcpy);
diff --git a/kernel/rcu/Kconfig b/kernel/rcu/Kconfig
index d471d22..ab62074 100644
--- a/kernel/rcu/Kconfig
+++ b/kernel/rcu/Kconfig
@@ -54,27 +54,25 @@
 	  Say N if you are unsure.
 
 config SRCU
-	bool
-	help
-	  This option selects the sleepable version of RCU. This version
-	  permits arbitrary sleeping or blocking within RCU read-side critical
-	  sections.
+	def_bool y
 
 config TINY_SRCU
 	bool
-	default y if SRCU && TINY_RCU
+	default y if TINY_RCU
 	help
 	  This option selects the single-CPU non-preemptible version of SRCU.
 
 config TREE_SRCU
 	bool
-	default y if SRCU && !TINY_RCU
+	default y if !TINY_RCU
 	help
 	  This option selects the full-fledged version of SRCU.
 
+config NEED_SRCU_NMI_SAFE
+	def_bool HAVE_NMI && !ARCH_HAS_NMI_SAFE_THIS_CPU_OPS && !TINY_SRCU
+
 config TASKS_RCU_GENERIC
 	def_bool TASKS_RCU || TASKS_RUDE_RCU || TASKS_TRACE_RCU
-	select SRCU
 	help
 	  This option enables generic infrastructure code supporting
 	  task-based RCU implementations.  Not for manual selection.
@@ -311,4 +309,12 @@
 	  Say N here if you hate read-side memory barriers.
 	  Take the default if you are unsure.
 
+config RCU_LAZY
+	bool "RCU callback lazy invocation functionality"
+	depends on RCU_NOCB_CPU
+	default n
+	help
+	  To save power, batch RCU callbacks and flush after delay, memory
+	  pressure, or callback list growing too big.
+
 endmenu # "RCU Subsystem"
diff --git a/kernel/rcu/Kconfig.debug b/kernel/rcu/Kconfig.debug
index 1b0c41d..232e29f 100644
--- a/kernel/rcu/Kconfig.debug
+++ b/kernel/rcu/Kconfig.debug
@@ -27,7 +27,6 @@
 	tristate "performance tests for RCU"
 	depends on DEBUG_KERNEL
 	select TORTURE_TEST
-	select SRCU
 	default n
 	help
 	  This option provides a kernel module that runs performance
@@ -43,7 +42,6 @@
 	tristate "torture tests for RCU"
 	depends on DEBUG_KERNEL
 	select TORTURE_TEST
-	select SRCU
 	default n
 	help
 	  This option provides a kernel module that runs torture tests
@@ -59,7 +57,6 @@
 	tristate "Scalability tests for read-side synchronization (RCU and others)"
 	depends on DEBUG_KERNEL
 	select TORTURE_TEST
-	select SRCU
 	default n
 	help
 	  This option provides a kernel module that runs performance tests
diff --git a/kernel/rcu/rcu.h b/kernel/rcu/rcu.h
index be5979d..c5aa934 100644
--- a/kernel/rcu/rcu.h
+++ b/kernel/rcu/rcu.h
@@ -286,7 +286,7 @@
  */
 extern void resched_cpu(int cpu);
 
-#if defined(CONFIG_SRCU) || !defined(CONFIG_TINY_RCU)
+#if !defined(CONFIG_TINY_RCU)
 
 #include <linux/rcu_node_tree.h>
 
@@ -375,6 +375,10 @@
 	     (cpu) <= rnp->grphi; \
 	     (cpu) = rcu_find_next_bit((rnp), (cpu) + 1 - (rnp->grplo), (mask)))
 
+#endif /* !defined(CONFIG_TINY_RCU) */
+
+#if !defined(CONFIG_TINY_RCU) || defined(CONFIG_TASKS_RCU_GENERIC)
+
 /*
  * Wrappers for the rcu_node::lock acquire and release.
  *
@@ -437,7 +441,7 @@
 #define raw_lockdep_assert_held_rcu_node(p)				\
 	lockdep_assert_held(&ACCESS_PRIVATE(p, lock))
 
-#endif /* #if defined(CONFIG_SRCU) || !defined(CONFIG_TINY_RCU) */
+#endif // #if !defined(CONFIG_TINY_RCU) || defined(CONFIG_TASKS_RCU_GENERIC)
 
 #ifdef CONFIG_TINY_RCU
 /* Tiny RCU doesn't expedite, as its purpose in life is instead to be tiny. */
@@ -474,6 +478,14 @@
 	INVALID_RCU_FLAVOR
 };
 
+#if defined(CONFIG_RCU_LAZY)
+unsigned long rcu_lazy_get_jiffies_till_flush(void);
+void rcu_lazy_set_jiffies_till_flush(unsigned long j);
+#else
+static inline unsigned long rcu_lazy_get_jiffies_till_flush(void) { return 0; }
+static inline void rcu_lazy_set_jiffies_till_flush(unsigned long j) { }
+#endif
+
 #if defined(CONFIG_TREE_RCU)
 void rcutorture_get_gp_data(enum rcutorture_type test_type, int *flags,
 			    unsigned long *gp_seq);
diff --git a/kernel/rcu/rcuscale.c b/kernel/rcu/rcuscale.c
index 3ef02d4..91fb590 100644
--- a/kernel/rcu/rcuscale.c
+++ b/kernel/rcu/rcuscale.c
@@ -95,6 +95,7 @@
 torture_param(int, writer_holdoff, 0, "Holdoff (us) between GPs, zero to disable");
 torture_param(int, kfree_rcu_test, 0, "Do we run a kfree_rcu() scale test?");
 torture_param(int, kfree_mult, 1, "Multiple of kfree_obj size to allocate.");
+torture_param(int, kfree_by_call_rcu, 0, "Use call_rcu() to emulate kfree_rcu()?");
 
 static char *scale_type = "rcu";
 module_param(scale_type, charp, 0444);
@@ -175,7 +176,7 @@
 	.get_gp_seq	= rcu_get_gp_seq,
 	.gp_diff	= rcu_seq_diff,
 	.exp_completed	= rcu_exp_batches_completed,
-	.async		= call_rcu,
+	.async		= call_rcu_hurry,
 	.gp_barrier	= rcu_barrier,
 	.sync		= synchronize_rcu,
 	.exp_sync	= synchronize_rcu_expedited,
@@ -659,6 +660,14 @@
 	struct rcu_head rh;
 };
 
+/* Used if doing RCU-kfree'ing via call_rcu(). */
+static void kfree_call_rcu(struct rcu_head *rh)
+{
+	struct kfree_obj *obj = container_of(rh, struct kfree_obj, rh);
+
+	kfree(obj);
+}
+
 static int
 kfree_scale_thread(void *arg)
 {
@@ -696,6 +705,11 @@
 			if (!alloc_ptr)
 				return -ENOMEM;
 
+			if (kfree_by_call_rcu) {
+				call_rcu(&(alloc_ptr->rh), kfree_call_rcu);
+				continue;
+			}
+
 			// By default kfree_rcu_test_single and kfree_rcu_test_double are
 			// initialized to false. If both have the same value (false or true)
 			// both are randomly tested, otherwise only the one with value true
@@ -767,11 +781,58 @@
 	return -EINVAL;
 }
 
+// Used if doing RCU-kfree'ing via call_rcu().
+static unsigned long jiffies_at_lazy_cb;
+static struct rcu_head lazy_test1_rh;
+static int rcu_lazy_test1_cb_called;
+static void call_rcu_lazy_test1(struct rcu_head *rh)
+{
+	jiffies_at_lazy_cb = jiffies;
+	WRITE_ONCE(rcu_lazy_test1_cb_called, 1);
+}
+
 static int __init
 kfree_scale_init(void)
 {
-	long i;
 	int firsterr = 0;
+	long i;
+	unsigned long jif_start;
+	unsigned long orig_jif;
+
+	// Also, do a quick self-test to ensure laziness is as much as
+	// expected.
+	if (kfree_by_call_rcu && !IS_ENABLED(CONFIG_RCU_LAZY)) {
+		pr_alert("CONFIG_RCU_LAZY is disabled, falling back to kfree_rcu() for delayed RCU kfree'ing\n");
+		kfree_by_call_rcu = 0;
+	}
+
+	if (kfree_by_call_rcu) {
+		/* do a test to check the timeout. */
+		orig_jif = rcu_lazy_get_jiffies_till_flush();
+
+		rcu_lazy_set_jiffies_till_flush(2 * HZ);
+		rcu_barrier();
+
+		jif_start = jiffies;
+		jiffies_at_lazy_cb = 0;
+		call_rcu(&lazy_test1_rh, call_rcu_lazy_test1);
+
+		smp_cond_load_relaxed(&rcu_lazy_test1_cb_called, VAL == 1);
+
+		rcu_lazy_set_jiffies_till_flush(orig_jif);
+
+		if (WARN_ON_ONCE(jiffies_at_lazy_cb - jif_start < 2 * HZ)) {
+			pr_alert("ERROR: call_rcu() CBs are not being lazy as expected!\n");
+			WARN_ON_ONCE(1);
+			return -1;
+		}
+
+		if (WARN_ON_ONCE(jiffies_at_lazy_cb - jif_start > 3 * HZ)) {
+			pr_alert("ERROR: call_rcu() CBs are being too lazy!\n");
+			WARN_ON_ONCE(1);
+			return -1;
+		}
+	}
 
 	kfree_nrealthreads = compute_real(kfree_nthreads);
 	/* Start up the kthreads. */
@@ -784,7 +845,9 @@
 		schedule_timeout_uninterruptible(1);
 	}
 
-	pr_alert("kfree object size=%zu\n", kfree_mult * sizeof(struct kfree_obj));
+	pr_alert("kfree object size=%zu, kfree_by_call_rcu=%d\n",
+			kfree_mult * sizeof(struct kfree_obj),
+			kfree_by_call_rcu);
 
 	kfree_reader_tasks = kcalloc(kfree_nrealthreads, sizeof(kfree_reader_tasks[0]),
 			       GFP_KERNEL);
diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
index 503c2aa..634df26 100644
--- a/kernel/rcu/rcutorture.c
+++ b/kernel/rcu/rcutorture.c
@@ -357,6 +357,10 @@
 	bool (*poll_gp_state_exp)(unsigned long oldstate);
 	void (*cond_sync_exp)(unsigned long oldstate);
 	void (*cond_sync_exp_full)(struct rcu_gp_oldstate *rgosp);
+	unsigned long (*get_comp_state)(void);
+	void (*get_comp_state_full)(struct rcu_gp_oldstate *rgosp);
+	bool (*same_gp_state)(unsigned long oldstate1, unsigned long oldstate2);
+	bool (*same_gp_state_full)(struct rcu_gp_oldstate *rgosp1, struct rcu_gp_oldstate *rgosp2);
 	unsigned long (*get_gp_state)(void);
 	void (*get_gp_state_full)(struct rcu_gp_oldstate *rgosp);
 	unsigned long (*get_gp_completed)(void);
@@ -510,7 +514,7 @@
 
 static void rcu_torture_deferred_free(struct rcu_torture *p)
 {
-	call_rcu(&p->rtort_rcu, rcu_torture_cb);
+	call_rcu_hurry(&p->rtort_rcu, rcu_torture_cb);
 }
 
 static void rcu_sync_torture_init(void)
@@ -535,6 +539,10 @@
 	.deferred_free		= rcu_torture_deferred_free,
 	.sync			= synchronize_rcu,
 	.exp_sync		= synchronize_rcu_expedited,
+	.same_gp_state		= same_state_synchronize_rcu,
+	.same_gp_state_full	= same_state_synchronize_rcu_full,
+	.get_comp_state		= get_completed_synchronize_rcu,
+	.get_comp_state_full	= get_completed_synchronize_rcu_full,
 	.get_gp_state		= get_state_synchronize_rcu,
 	.get_gp_state_full	= get_state_synchronize_rcu_full,
 	.get_gp_completed	= get_completed_synchronize_rcu,
@@ -551,7 +559,7 @@
 	.start_gp_poll_exp_full	= start_poll_synchronize_rcu_expedited_full,
 	.poll_gp_state_exp	= poll_state_synchronize_rcu,
 	.cond_sync_exp		= cond_synchronize_rcu_expedited,
-	.call			= call_rcu,
+	.call			= call_rcu_hurry,
 	.cb_barrier		= rcu_barrier,
 	.fqs			= rcu_force_quiescent_state,
 	.stats			= NULL,
@@ -615,10 +623,14 @@
 DEFINE_STATIC_SRCU(srcu_ctl);
 static struct srcu_struct srcu_ctld;
 static struct srcu_struct *srcu_ctlp = &srcu_ctl;
+static struct rcu_torture_ops srcud_ops;
 
 static int srcu_torture_read_lock(void) __acquires(srcu_ctlp)
 {
-	return srcu_read_lock(srcu_ctlp);
+	if (cur_ops == &srcud_ops)
+		return srcu_read_lock_nmisafe(srcu_ctlp);
+	else
+		return srcu_read_lock(srcu_ctlp);
 }
 
 static void
@@ -642,7 +654,10 @@
 
 static void srcu_torture_read_unlock(int idx) __releases(srcu_ctlp)
 {
-	srcu_read_unlock(srcu_ctlp, idx);
+	if (cur_ops == &srcud_ops)
+		srcu_read_unlock_nmisafe(srcu_ctlp, idx);
+	else
+		srcu_read_unlock(srcu_ctlp, idx);
 }
 
 static int torture_srcu_read_lock_held(void)
@@ -848,7 +863,7 @@
 
 static void synchronize_rcu_mult_test(void)
 {
-	synchronize_rcu_mult(call_rcu_tasks, call_rcu);
+	synchronize_rcu_mult(call_rcu_tasks, call_rcu_hurry);
 }
 
 static struct rcu_torture_ops tasks_ops = {
@@ -1258,13 +1273,15 @@
 	} else if (gp_normal && !cur_ops->deferred_free) {
 		pr_alert("%s: gp_normal without primitives.\n", __func__);
 	}
-	if (gp_poll1 && cur_ops->start_gp_poll && cur_ops->poll_gp_state) {
+	if (gp_poll1 && cur_ops->get_comp_state && cur_ops->same_gp_state &&
+	    cur_ops->start_gp_poll && cur_ops->poll_gp_state) {
 		synctype[nsynctypes++] = RTWS_POLL_GET;
 		pr_info("%s: Testing polling GPs.\n", __func__);
 	} else if (gp_poll && (!cur_ops->start_gp_poll || !cur_ops->poll_gp_state)) {
 		pr_alert("%s: gp_poll without primitives.\n", __func__);
 	}
-	if (gp_poll_full1 && cur_ops->start_gp_poll_full && cur_ops->poll_gp_state_full) {
+	if (gp_poll_full1 && cur_ops->get_comp_state_full && cur_ops->same_gp_state_full
+	    && cur_ops->start_gp_poll_full && cur_ops->poll_gp_state_full) {
 		synctype[nsynctypes++] = RTWS_POLL_GET_FULL;
 		pr_info("%s: Testing polling full-state GPs.\n", __func__);
 	} else if (gp_poll_full && (!cur_ops->start_gp_poll_full || !cur_ops->poll_gp_state_full)) {
@@ -1339,14 +1356,18 @@
 	struct rcu_gp_oldstate cookie_full;
 	int expediting = 0;
 	unsigned long gp_snap;
+	unsigned long gp_snap1;
 	struct rcu_gp_oldstate gp_snap_full;
+	struct rcu_gp_oldstate gp_snap1_full;
 	int i;
 	int idx;
 	int oldnice = task_nice(current);
+	struct rcu_gp_oldstate rgo[NUM_ACTIVE_RCU_POLL_FULL_OLDSTATE];
 	struct rcu_torture *rp;
 	struct rcu_torture *old_rp;
 	static DEFINE_TORTURE_RANDOM(rand);
 	bool stutter_waited;
+	unsigned long ulo[NUM_ACTIVE_RCU_POLL_OLDSTATE];
 
 	VERBOSE_TOROUT_STRING("rcu_torture_writer task started");
 	if (!can_expedite)
@@ -1463,20 +1484,43 @@
 				break;
 			case RTWS_POLL_GET:
 				rcu_torture_writer_state = RTWS_POLL_GET;
+				for (i = 0; i < ARRAY_SIZE(ulo); i++)
+					ulo[i] = cur_ops->get_comp_state();
 				gp_snap = cur_ops->start_gp_poll();
 				rcu_torture_writer_state = RTWS_POLL_WAIT;
-				while (!cur_ops->poll_gp_state(gp_snap))
+				while (!cur_ops->poll_gp_state(gp_snap)) {
+					gp_snap1 = cur_ops->get_gp_state();
+					for (i = 0; i < ARRAY_SIZE(ulo); i++)
+						if (cur_ops->poll_gp_state(ulo[i]) ||
+						    cur_ops->same_gp_state(ulo[i], gp_snap1)) {
+							ulo[i] = gp_snap1;
+							break;
+						}
+					WARN_ON_ONCE(i >= ARRAY_SIZE(ulo));
 					torture_hrtimeout_jiffies(torture_random(&rand) % 16,
 								  &rand);
+				}
 				rcu_torture_pipe_update(old_rp);
 				break;
 			case RTWS_POLL_GET_FULL:
 				rcu_torture_writer_state = RTWS_POLL_GET_FULL;
+				for (i = 0; i < ARRAY_SIZE(rgo); i++)
+					cur_ops->get_comp_state_full(&rgo[i]);
 				cur_ops->start_gp_poll_full(&gp_snap_full);
 				rcu_torture_writer_state = RTWS_POLL_WAIT_FULL;
-				while (!cur_ops->poll_gp_state_full(&gp_snap_full))
+				while (!cur_ops->poll_gp_state_full(&gp_snap_full)) {
+					cur_ops->get_gp_state_full(&gp_snap1_full);
+					for (i = 0; i < ARRAY_SIZE(rgo); i++)
+						if (cur_ops->poll_gp_state_full(&rgo[i]) ||
+						    cur_ops->same_gp_state_full(&rgo[i],
+										&gp_snap1_full)) {
+							rgo[i] = gp_snap1_full;
+							break;
+						}
+					WARN_ON_ONCE(i >= ARRAY_SIZE(rgo));
 					torture_hrtimeout_jiffies(torture_random(&rand) % 16,
 								  &rand);
+				}
 				rcu_torture_pipe_update(old_rp);
 				break;
 			case RTWS_POLL_GET_EXP:
@@ -3388,13 +3432,13 @@
 	/* Try to queue the rh2 pair of callbacks for the same grace period. */
 	preempt_disable(); /* Prevent preemption from interrupting test. */
 	rcu_read_lock(); /* Make it impossible to finish a grace period. */
-	call_rcu(&rh1, rcu_torture_leak_cb); /* Start grace period. */
+	call_rcu_hurry(&rh1, rcu_torture_leak_cb); /* Start grace period. */
 	local_irq_disable(); /* Make it harder to start a new grace period. */
-	call_rcu(&rh2, rcu_torture_leak_cb);
-	call_rcu(&rh2, rcu_torture_err_cb); /* Duplicate callback. */
+	call_rcu_hurry(&rh2, rcu_torture_leak_cb);
+	call_rcu_hurry(&rh2, rcu_torture_err_cb); /* Duplicate callback. */
 	if (rhp) {
-		call_rcu(rhp, rcu_torture_leak_cb);
-		call_rcu(rhp, rcu_torture_err_cb); /* Another duplicate callback. */
+		call_rcu_hurry(rhp, rcu_torture_leak_cb);
+		call_rcu_hurry(rhp, rcu_torture_err_cb); /* Another duplicate callback. */
 	}
 	local_irq_enable();
 	rcu_read_unlock();
diff --git a/kernel/rcu/srcutiny.c b/kernel/rcu/srcutiny.c
index 33adafd..b12fb0c 100644
--- a/kernel/rcu/srcutiny.c
+++ b/kernel/rcu/srcutiny.c
@@ -197,6 +197,16 @@
 {
 	struct rcu_synchronize rs;
 
+	RCU_LOCKDEP_WARN(lockdep_is_held(ssp) ||
+			lock_is_held(&rcu_bh_lock_map) ||
+			lock_is_held(&rcu_lock_map) ||
+			lock_is_held(&rcu_sched_lock_map),
+			"Illegal synchronize_srcu() in same-type SRCU (or in RCU) read-side critical section");
+
+	if (rcu_scheduler_active == RCU_SCHEDULER_INACTIVE)
+		return;
+
+	might_sleep();
 	init_rcu_head_on_stack(&rs.head);
 	init_completion(&rs.completion);
 	call_srcu(ssp, &rs.head, wakeme_after_rcu);
diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c
index 1c304fe..ca4b5dc 100644
--- a/kernel/rcu/srcutree.c
+++ b/kernel/rcu/srcutree.c
@@ -417,7 +417,7 @@
 	for_each_possible_cpu(cpu) {
 		struct srcu_data *cpuc = per_cpu_ptr(ssp->sda, cpu);
 
-		sum += READ_ONCE(cpuc->srcu_lock_count[idx]);
+		sum += atomic_long_read(&cpuc->srcu_lock_count[idx]);
 	}
 	return sum;
 }
@@ -429,13 +429,18 @@
 static unsigned long srcu_readers_unlock_idx(struct srcu_struct *ssp, int idx)
 {
 	int cpu;
+	unsigned long mask = 0;
 	unsigned long sum = 0;
 
 	for_each_possible_cpu(cpu) {
 		struct srcu_data *cpuc = per_cpu_ptr(ssp->sda, cpu);
 
-		sum += READ_ONCE(cpuc->srcu_unlock_count[idx]);
+		sum += atomic_long_read(&cpuc->srcu_unlock_count[idx]);
+		if (IS_ENABLED(CONFIG_PROVE_RCU))
+			mask = mask | READ_ONCE(cpuc->srcu_nmi_safety);
 	}
+	WARN_ONCE(IS_ENABLED(CONFIG_PROVE_RCU) && (mask & (mask >> 1)),
+		  "Mixed NMI-safe readers for srcu_struct at %ps.\n", ssp);
 	return sum;
 }
 
@@ -503,10 +508,10 @@
 	for_each_possible_cpu(cpu) {
 		struct srcu_data *cpuc = per_cpu_ptr(ssp->sda, cpu);
 
-		sum += READ_ONCE(cpuc->srcu_lock_count[0]);
-		sum += READ_ONCE(cpuc->srcu_lock_count[1]);
-		sum -= READ_ONCE(cpuc->srcu_unlock_count[0]);
-		sum -= READ_ONCE(cpuc->srcu_unlock_count[1]);
+		sum += atomic_long_read(&cpuc->srcu_lock_count[0]);
+		sum += atomic_long_read(&cpuc->srcu_lock_count[1]);
+		sum -= atomic_long_read(&cpuc->srcu_unlock_count[0]);
+		sum -= atomic_long_read(&cpuc->srcu_unlock_count[1]);
 	}
 	return sum;
 }
@@ -626,6 +631,29 @@
 }
 EXPORT_SYMBOL_GPL(cleanup_srcu_struct);
 
+#ifdef CONFIG_PROVE_RCU
+/*
+ * Check for consistent NMI safety.
+ */
+void srcu_check_nmi_safety(struct srcu_struct *ssp, bool nmi_safe)
+{
+	int nmi_safe_mask = 1 << nmi_safe;
+	int old_nmi_safe_mask;
+	struct srcu_data *sdp;
+
+	/* NMI-unsafe use in NMI is a bad sign */
+	WARN_ON_ONCE(!nmi_safe && in_nmi());
+	sdp = raw_cpu_ptr(ssp->sda);
+	old_nmi_safe_mask = READ_ONCE(sdp->srcu_nmi_safety);
+	if (!old_nmi_safe_mask) {
+		WRITE_ONCE(sdp->srcu_nmi_safety, nmi_safe_mask);
+		return;
+	}
+	WARN_ONCE(old_nmi_safe_mask != nmi_safe_mask, "CPU %d old state %d new state %d\n", sdp->cpu, old_nmi_safe_mask, nmi_safe_mask);
+}
+EXPORT_SYMBOL_GPL(srcu_check_nmi_safety);
+#endif /* CONFIG_PROVE_RCU */
+
 /*
  * Counts the new reader in the appropriate per-CPU element of the
  * srcu_struct.
@@ -636,7 +664,7 @@
 	int idx;
 
 	idx = READ_ONCE(ssp->srcu_idx) & 0x1;
-	this_cpu_inc(ssp->sda->srcu_lock_count[idx]);
+	this_cpu_inc(ssp->sda->srcu_lock_count[idx].counter);
 	smp_mb(); /* B */  /* Avoid leaking the critical section. */
 	return idx;
 }
@@ -650,10 +678,45 @@
 void __srcu_read_unlock(struct srcu_struct *ssp, int idx)
 {
 	smp_mb(); /* C */  /* Avoid leaking the critical section. */
-	this_cpu_inc(ssp->sda->srcu_unlock_count[idx]);
+	this_cpu_inc(ssp->sda->srcu_unlock_count[idx].counter);
 }
 EXPORT_SYMBOL_GPL(__srcu_read_unlock);
 
+#ifdef CONFIG_NEED_SRCU_NMI_SAFE
+
+/*
+ * Counts the new reader in the appropriate per-CPU element of the
+ * srcu_struct, but in an NMI-safe manner using RMW atomics.
+ * Returns an index that must be passed to the matching srcu_read_unlock().
+ */
+int __srcu_read_lock_nmisafe(struct srcu_struct *ssp)
+{
+	int idx;
+	struct srcu_data *sdp = raw_cpu_ptr(ssp->sda);
+
+	idx = READ_ONCE(ssp->srcu_idx) & 0x1;
+	atomic_long_inc(&sdp->srcu_lock_count[idx]);
+	smp_mb__after_atomic(); /* B */  /* Avoid leaking the critical section. */
+	return idx;
+}
+EXPORT_SYMBOL_GPL(__srcu_read_lock_nmisafe);
+
+/*
+ * Removes the count for the old reader from the appropriate per-CPU
+ * element of the srcu_struct.  Note that this may well be a different
+ * CPU than that which was incremented by the corresponding srcu_read_lock().
+ */
+void __srcu_read_unlock_nmisafe(struct srcu_struct *ssp, int idx)
+{
+	struct srcu_data *sdp = raw_cpu_ptr(ssp->sda);
+
+	smp_mb__before_atomic(); /* C */  /* Avoid leaking the critical section. */
+	atomic_long_inc(&sdp->srcu_unlock_count[idx]);
+}
+EXPORT_SYMBOL_GPL(__srcu_read_unlock_nmisafe);
+
+#endif // CONFIG_NEED_SRCU_NMI_SAFE
+
 /*
  * Start an SRCU grace period.
  */
@@ -1090,7 +1153,12 @@
 	int ss_state;
 
 	check_init_srcu_struct(ssp);
-	idx = srcu_read_lock(ssp);
+	/*
+	 * While starting a new grace period, make sure we are in an
+	 * SRCU read-side critical section so that the grace-period
+	 * sequence number cannot wrap around in the meantime.
+	 */
+	idx = __srcu_read_lock_nmisafe(ssp);
 	ss_state = smp_load_acquire(&ssp->srcu_size_state);
 	if (ss_state < SRCU_SIZE_WAIT_CALL)
 		sdp = per_cpu_ptr(ssp->sda, 0);
@@ -1123,7 +1191,7 @@
 		srcu_funnel_gp_start(ssp, sdp, s, do_norm);
 	else if (needexp)
 		srcu_funnel_exp_start(ssp, sdp_mynode, s);
-	srcu_read_unlock(ssp, idx);
+	__srcu_read_unlock_nmisafe(ssp, idx);
 	return s;
 }
 
@@ -1427,13 +1495,13 @@
 	/* Initial count prevents reaching zero until all CBs are posted. */
 	atomic_set(&ssp->srcu_barrier_cpu_cnt, 1);
 
-	idx = srcu_read_lock(ssp);
+	idx = __srcu_read_lock_nmisafe(ssp);
 	if (smp_load_acquire(&ssp->srcu_size_state) < SRCU_SIZE_WAIT_BARRIER)
 		srcu_barrier_one_cpu(ssp, per_cpu_ptr(ssp->sda, 0));
 	else
 		for_each_possible_cpu(cpu)
 			srcu_barrier_one_cpu(ssp, per_cpu_ptr(ssp->sda, cpu));
-	srcu_read_unlock(ssp, idx);
+	__srcu_read_unlock_nmisafe(ssp, idx);
 
 	/* Remove the initial count, at which point reaching zero can happen. */
 	if (atomic_dec_and_test(&ssp->srcu_barrier_cpu_cnt))
@@ -1687,8 +1755,8 @@
 			struct srcu_data *sdp;
 
 			sdp = per_cpu_ptr(ssp->sda, cpu);
-			u0 = data_race(sdp->srcu_unlock_count[!idx]);
-			u1 = data_race(sdp->srcu_unlock_count[idx]);
+			u0 = data_race(atomic_long_read(&sdp->srcu_unlock_count[!idx]));
+			u1 = data_race(atomic_long_read(&sdp->srcu_unlock_count[idx]));
 
 			/*
 			 * Make sure that a lock is always counted if the corresponding
@@ -1696,8 +1764,8 @@
 			 */
 			smp_rmb();
 
-			l0 = data_race(sdp->srcu_lock_count[!idx]);
-			l1 = data_race(sdp->srcu_lock_count[idx]);
+			l0 = data_race(atomic_long_read(&sdp->srcu_lock_count[!idx]));
+			l1 = data_race(atomic_long_read(&sdp->srcu_lock_count[idx]));
 
 			c0 = l0 - u0;
 			c1 = l1 - u1;
diff --git a/kernel/rcu/sync.c b/kernel/rcu/sync.c
index 5cefc70..e550f97 100644
--- a/kernel/rcu/sync.c
+++ b/kernel/rcu/sync.c
@@ -44,7 +44,7 @@
 
 static void rcu_sync_call(struct rcu_sync *rsp)
 {
-	call_rcu(&rsp->cb_head, rcu_sync_func);
+	call_rcu_hurry(&rsp->cb_head, rcu_sync_func);
 }
 
 /**
diff --git a/kernel/rcu/tasks.h b/kernel/rcu/tasks.h
index f5bf6fb..b0b885e 100644
--- a/kernel/rcu/tasks.h
+++ b/kernel/rcu/tasks.h
@@ -728,7 +728,7 @@
 		if (rtsi > 0 && !reported && time_after(j, lastinfo + rtsi)) {
 			lastinfo = j;
 			rtsi = rtsi * rcu_task_stall_info_mult;
-			pr_info("%s: %s grace period %lu is %lu jiffies old.\n",
+			pr_info("%s: %s grace period number %lu (since boot) is %lu jiffies old.\n",
 				__func__, rtp->kname, rtp->tasks_gp_seq, j - rtp->gp_start);
 		}
 	}
diff --git a/kernel/rcu/tiny.c b/kernel/rcu/tiny.c
index a33a8d4..72913ce 100644
--- a/kernel/rcu/tiny.c
+++ b/kernel/rcu/tiny.c
@@ -44,7 +44,7 @@
 
 void rcu_barrier(void)
 {
-	wait_rcu_gp(call_rcu);
+	wait_rcu_gp(call_rcu_hurry);
 }
 EXPORT_SYMBOL(rcu_barrier);
 
diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
index 6bb8e72..d7764ff 100644
--- a/kernel/rcu/tree.c
+++ b/kernel/rcu/tree.c
@@ -301,12 +301,6 @@
 	return !(snap & RCU_DYNTICKS_IDX);
 }
 
-/* Return true if the specified CPU is currently idle from an RCU viewpoint.  */
-bool rcu_is_idle_cpu(int cpu)
-{
-	return rcu_dynticks_in_eqs(rcu_dynticks_snap(cpu));
-}
-
 /*
  * Return true if the CPU corresponding to the specified rcu_data
  * structure has spent some time in an extended quiescent state since
@@ -2106,7 +2100,7 @@
 	if (!IS_ENABLED(CONFIG_HOTPLUG_CPU))
 		return 0;
 
-	blkd = !!(rnp->qsmask & rdp->grpmask);
+	blkd = !!(READ_ONCE(rnp->qsmask) & rdp->grpmask);
 	trace_rcu_grace_period(rcu_state.name, READ_ONCE(rnp->gp_seq),
 			       blkd ? TPS("cpuofl-bgp") : TPS("cpuofl"));
 	return 0;
@@ -2416,7 +2410,7 @@
 	struct rcu_node *rnp_old = NULL;
 
 	/* Funnel through hierarchy to reduce memory contention. */
-	rnp = __this_cpu_read(rcu_data.mynode);
+	rnp = raw_cpu_read(rcu_data.mynode);
 	for (; rnp != NULL; rnp = rnp->parent) {
 		ret = (READ_ONCE(rcu_state.gp_flags) & RCU_GP_FLAG_FQS) ||
 		       !raw_spin_trylock(&rnp->fqslock);
@@ -2728,47 +2722,8 @@
 	raw_spin_unlock_rcu_node(rnp);
 }
 
-/**
- * call_rcu() - Queue an RCU callback for invocation after a grace period.
- * @head: structure to be used for queueing the RCU updates.
- * @func: actual callback function to be invoked after the grace period
- *
- * The callback function will be invoked some time after a full grace
- * period elapses, in other words after all pre-existing RCU read-side
- * critical sections have completed.  However, the callback function
- * might well execute concurrently with RCU read-side critical sections
- * that started after call_rcu() was invoked.
- *
- * RCU read-side critical sections are delimited by rcu_read_lock()
- * and rcu_read_unlock(), and may be nested.  In addition, but only in
- * v5.0 and later, regions of code across which interrupts, preemption,
- * or softirqs have been disabled also serve as RCU read-side critical
- * sections.  This includes hardware interrupt handlers, softirq handlers,
- * and NMI handlers.
- *
- * Note that all CPUs must agree that the grace period extended beyond
- * all pre-existing RCU read-side critical section.  On systems with more
- * than one CPU, this means that when "func()" is invoked, each CPU is
- * guaranteed to have executed a full memory barrier since the end of its
- * last RCU read-side critical section whose beginning preceded the call
- * to call_rcu().  It also means that each CPU executing an RCU read-side
- * critical section that continues beyond the start of "func()" must have
- * executed a memory barrier after the call_rcu() but before the beginning
- * of that RCU read-side critical section.  Note that these guarantees
- * include CPUs that are offline, idle, or executing in user mode, as
- * well as CPUs that are executing in the kernel.
- *
- * Furthermore, if CPU A invoked call_rcu() and CPU B invoked the
- * resulting RCU callback function "func()", then both CPU A and CPU B are
- * guaranteed to execute a full memory barrier during the time interval
- * between the call to call_rcu() and the invocation of "func()" -- even
- * if CPU A and CPU B are the same CPU (but again only if the system has
- * more than one CPU).
- *
- * Implementation of these memory-ordering guarantees is described here:
- * Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst.
- */
-void call_rcu(struct rcu_head *head, rcu_callback_t func)
+static void
+__call_rcu_common(struct rcu_head *head, rcu_callback_t func, bool lazy)
 {
 	static atomic_t doublefrees;
 	unsigned long flags;
@@ -2809,7 +2764,7 @@
 	}
 
 	check_cb_ovld(rdp);
-	if (rcu_nocb_try_bypass(rdp, head, &was_alldone, flags))
+	if (rcu_nocb_try_bypass(rdp, head, &was_alldone, flags, lazy))
 		return; // Enqueued onto ->nocb_bypass, so just leave.
 	// If no-CBs CPU gets here, rcu_nocb_try_bypass() acquired ->nocb_lock.
 	rcu_segcblist_enqueue(&rdp->cblist, head);
@@ -2831,8 +2786,84 @@
 		local_irq_restore(flags);
 	}
 }
-EXPORT_SYMBOL_GPL(call_rcu);
 
+#ifdef CONFIG_RCU_LAZY
+/**
+ * call_rcu_hurry() - Queue RCU callback for invocation after grace period, and
+ * flush all lazy callbacks (including the new one) to the main ->cblist while
+ * doing so.
+ *
+ * @head: structure to be used for queueing the RCU updates.
+ * @func: actual callback function to be invoked after the grace period
+ *
+ * The callback function will be invoked some time after a full grace
+ * period elapses, in other words after all pre-existing RCU read-side
+ * critical sections have completed.
+ *
+ * Use this API instead of call_rcu() if you don't want the callback to be
+ * invoked after very long periods of time, which can happen on systems without
+ * memory pressure and on systems which are lightly loaded or mostly idle.
+ * This function will cause callbacks to be invoked sooner than later at the
+ * expense of extra power. Other than that, this function is identical to, and
+ * reuses call_rcu()'s logic. Refer to call_rcu() for more details about memory
+ * ordering and other functionality.
+ */
+void call_rcu_hurry(struct rcu_head *head, rcu_callback_t func)
+{
+	return __call_rcu_common(head, func, false);
+}
+EXPORT_SYMBOL_GPL(call_rcu_hurry);
+#endif
+
+/**
+ * call_rcu() - Queue an RCU callback for invocation after a grace period.
+ * By default the callbacks are 'lazy' and are kept hidden from the main
+ * ->cblist to prevent starting of grace periods too soon.
+ * If you desire grace periods to start very soon, use call_rcu_hurry().
+ *
+ * @head: structure to be used for queueing the RCU updates.
+ * @func: actual callback function to be invoked after the grace period
+ *
+ * The callback function will be invoked some time after a full grace
+ * period elapses, in other words after all pre-existing RCU read-side
+ * critical sections have completed.  However, the callback function
+ * might well execute concurrently with RCU read-side critical sections
+ * that started after call_rcu() was invoked.
+ *
+ * RCU read-side critical sections are delimited by rcu_read_lock()
+ * and rcu_read_unlock(), and may be nested.  In addition, but only in
+ * v5.0 and later, regions of code across which interrupts, preemption,
+ * or softirqs have been disabled also serve as RCU read-side critical
+ * sections.  This includes hardware interrupt handlers, softirq handlers,
+ * and NMI handlers.
+ *
+ * Note that all CPUs must agree that the grace period extended beyond
+ * all pre-existing RCU read-side critical section.  On systems with more
+ * than one CPU, this means that when "func()" is invoked, each CPU is
+ * guaranteed to have executed a full memory barrier since the end of its
+ * last RCU read-side critical section whose beginning preceded the call
+ * to call_rcu().  It also means that each CPU executing an RCU read-side
+ * critical section that continues beyond the start of "func()" must have
+ * executed a memory barrier after the call_rcu() but before the beginning
+ * of that RCU read-side critical section.  Note that these guarantees
+ * include CPUs that are offline, idle, or executing in user mode, as
+ * well as CPUs that are executing in the kernel.
+ *
+ * Furthermore, if CPU A invoked call_rcu() and CPU B invoked the
+ * resulting RCU callback function "func()", then both CPU A and CPU B are
+ * guaranteed to execute a full memory barrier during the time interval
+ * between the call to call_rcu() and the invocation of "func()" -- even
+ * if CPU A and CPU B are the same CPU (but again only if the system has
+ * more than one CPU).
+ *
+ * Implementation of these memory-ordering guarantees is described here:
+ * Documentation/RCU/Design/Memory-Ordering/Tree-RCU-Memory-Ordering.rst.
+ */
+void call_rcu(struct rcu_head *head, rcu_callback_t func)
+{
+	return __call_rcu_common(head, func, IS_ENABLED(CONFIG_RCU_LAZY));
+}
+EXPORT_SYMBOL_GPL(call_rcu);
 
 /* Maximum number of jiffies to wait before draining a batch. */
 #define KFREE_DRAIN_JIFFIES (5 * HZ)
@@ -3507,7 +3538,7 @@
 		if (rcu_gp_is_expedited())
 			synchronize_rcu_expedited();
 		else
-			wait_rcu_gp(call_rcu);
+			wait_rcu_gp(call_rcu_hurry);
 		return;
 	}
 
@@ -3894,6 +3925,8 @@
 {
 	unsigned long gseq = READ_ONCE(rcu_state.barrier_sequence);
 	unsigned long lseq = READ_ONCE(rdp->barrier_seq_snap);
+	bool wake_nocb = false;
+	bool was_alldone = false;
 
 	lockdep_assert_held(&rcu_state.barrier_lock);
 	if (rcu_seq_state(lseq) || !rcu_seq_state(gseq) || rcu_seq_ctr(lseq) != rcu_seq_ctr(gseq))
@@ -3902,7 +3935,14 @@
 	rdp->barrier_head.func = rcu_barrier_callback;
 	debug_rcu_head_queue(&rdp->barrier_head);
 	rcu_nocb_lock(rdp);
-	WARN_ON_ONCE(!rcu_nocb_flush_bypass(rdp, NULL, jiffies));
+	/*
+	 * Flush bypass and wakeup rcuog if we add callbacks to an empty regular
+	 * queue. This way we don't wait for bypass timer that can reach seconds
+	 * if it's fully lazy.
+	 */
+	was_alldone = rcu_rdp_is_offloaded(rdp) && !rcu_segcblist_pend_cbs(&rdp->cblist);
+	WARN_ON_ONCE(!rcu_nocb_flush_bypass(rdp, NULL, jiffies, false));
+	wake_nocb = was_alldone && rcu_segcblist_pend_cbs(&rdp->cblist);
 	if (rcu_segcblist_entrain(&rdp->cblist, &rdp->barrier_head)) {
 		atomic_inc(&rcu_state.barrier_cpu_count);
 	} else {
@@ -3910,6 +3950,8 @@
 		rcu_barrier_trace(TPS("IRQNQ"), -1, rcu_state.barrier_sequence);
 	}
 	rcu_nocb_unlock(rdp);
+	if (wake_nocb)
+		wake_nocb_gp(rdp, false);
 	smp_store_release(&rdp->barrier_seq_snap, gseq);
 }
 
@@ -4276,8 +4318,6 @@
 	// Do any dangling deferred wakeups.
 	do_nocb_deferred_wakeup(rdp);
 
-	/* QS for any half-done expedited grace period. */
-	rcu_report_exp_rdp(rdp);
 	rcu_preempt_deferred_qs(current);
 
 	/* Remove outgoing CPU from mask in the leaf rcu_node structure. */
@@ -4325,7 +4365,7 @@
 	my_rdp = this_cpu_ptr(&rcu_data);
 	my_rnp = my_rdp->mynode;
 	rcu_nocb_lock(my_rdp); /* irqs already disabled. */
-	WARN_ON_ONCE(!rcu_nocb_flush_bypass(my_rdp, NULL, jiffies));
+	WARN_ON_ONCE(!rcu_nocb_flush_bypass(my_rdp, NULL, jiffies, false));
 	raw_spin_lock_rcu_node(my_rnp); /* irqs already disabled. */
 	/* Leverage recent GPs and set GP for new callbacks. */
 	needwake = rcu_advance_cbs(my_rnp, rdp) ||
diff --git a/kernel/rcu/tree.h b/kernel/rcu/tree.h
index d4a97e4..fcb5d696 100644
--- a/kernel/rcu/tree.h
+++ b/kernel/rcu/tree.h
@@ -263,14 +263,16 @@
 	unsigned long last_fqs_resched;	/* Time of last rcu_resched(). */
 	unsigned long last_sched_clock;	/* Jiffies of last rcu_sched_clock_irq(). */
 
+	long lazy_len;			/* Length of buffered lazy callbacks. */
 	int cpu;
 };
 
 /* Values for nocb_defer_wakeup field in struct rcu_data. */
 #define RCU_NOCB_WAKE_NOT	0
 #define RCU_NOCB_WAKE_BYPASS	1
-#define RCU_NOCB_WAKE		2
-#define RCU_NOCB_WAKE_FORCE	3
+#define RCU_NOCB_WAKE_LAZY	2
+#define RCU_NOCB_WAKE		3
+#define RCU_NOCB_WAKE_FORCE	4
 
 #define RCU_JIFFIES_TILL_FORCE_QS (1 + (HZ > 250) + (HZ > 500))
 					/* For jiffies_till_first_fqs and */
@@ -439,10 +441,12 @@
 static struct swait_queue_head *rcu_nocb_gp_get(struct rcu_node *rnp);
 static void rcu_nocb_gp_cleanup(struct swait_queue_head *sq);
 static void rcu_init_one_nocb(struct rcu_node *rnp);
+static bool wake_nocb_gp(struct rcu_data *rdp, bool force);
 static bool rcu_nocb_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
-				  unsigned long j);
+				  unsigned long j, bool lazy);
 static bool rcu_nocb_try_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
-				bool *was_alldone, unsigned long flags);
+				bool *was_alldone, unsigned long flags,
+				bool lazy);
 static void __call_rcu_nocb_wake(struct rcu_data *rdp, bool was_empty,
 				 unsigned long flags);
 static int rcu_nocb_need_deferred_wakeup(struct rcu_data *rdp, int level);
diff --git a/kernel/rcu/tree_exp.h b/kernel/rcu/tree_exp.h
index 18e9b4c..ed6c3cc 100644
--- a/kernel/rcu/tree_exp.h
+++ b/kernel/rcu/tree_exp.h
@@ -937,7 +937,7 @@
 
 	/* If expedited grace periods are prohibited, fall back to normal. */
 	if (rcu_gp_is_normal()) {
-		wait_rcu_gp(call_rcu);
+		wait_rcu_gp(call_rcu_hurry);
 		return;
 	}
 
diff --git a/kernel/rcu/tree_nocb.h b/kernel/rcu/tree_nocb.h
index 0a5f0ef..9e1c8ca 100644
--- a/kernel/rcu/tree_nocb.h
+++ b/kernel/rcu/tree_nocb.h
@@ -257,6 +257,31 @@
 }
 
 /*
+ * LAZY_FLUSH_JIFFIES decides the maximum amount of time that
+ * can elapse before lazy callbacks are flushed. Lazy callbacks
+ * could be flushed much earlier for a number of other reasons
+ * however, LAZY_FLUSH_JIFFIES will ensure no lazy callbacks are
+ * left unsubmitted to RCU after those many jiffies.
+ */
+#define LAZY_FLUSH_JIFFIES (10 * HZ)
+static unsigned long jiffies_till_flush = LAZY_FLUSH_JIFFIES;
+
+#ifdef CONFIG_RCU_LAZY
+// To be called only from test code.
+void rcu_lazy_set_jiffies_till_flush(unsigned long jif)
+{
+	jiffies_till_flush = jif;
+}
+EXPORT_SYMBOL(rcu_lazy_set_jiffies_till_flush);
+
+unsigned long rcu_lazy_get_jiffies_till_flush(void)
+{
+	return jiffies_till_flush;
+}
+EXPORT_SYMBOL(rcu_lazy_get_jiffies_till_flush);
+#endif
+
+/*
  * Arrange to wake the GP kthread for this NOCB group at some future
  * time when it is safe to do so.
  */
@@ -269,10 +294,14 @@
 	raw_spin_lock_irqsave(&rdp_gp->nocb_gp_lock, flags);
 
 	/*
-	 * Bypass wakeup overrides previous deferments. In case
-	 * of callback storm, no need to wake up too early.
+	 * Bypass wakeup overrides previous deferments. In case of
+	 * callback storms, no need to wake up too early.
 	 */
-	if (waketype == RCU_NOCB_WAKE_BYPASS) {
+	if (waketype == RCU_NOCB_WAKE_LAZY &&
+	    rdp->nocb_defer_wakeup == RCU_NOCB_WAKE_NOT) {
+		mod_timer(&rdp_gp->nocb_timer, jiffies + jiffies_till_flush);
+		WRITE_ONCE(rdp_gp->nocb_defer_wakeup, waketype);
+	} else if (waketype == RCU_NOCB_WAKE_BYPASS) {
 		mod_timer(&rdp_gp->nocb_timer, jiffies + 2);
 		WRITE_ONCE(rdp_gp->nocb_defer_wakeup, waketype);
 	} else {
@@ -293,12 +322,16 @@
  * proves to be initially empty, just return false because the no-CB GP
  * kthread may need to be awakened in this case.
  *
+ * Return true if there was something to be flushed and it succeeded, otherwise
+ * false.
+ *
  * Note that this function always returns true if rhp is NULL.
  */
-static bool rcu_nocb_do_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
-				     unsigned long j)
+static bool rcu_nocb_do_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp_in,
+				     unsigned long j, bool lazy)
 {
 	struct rcu_cblist rcl;
+	struct rcu_head *rhp = rhp_in;
 
 	WARN_ON_ONCE(!rcu_rdp_is_offloaded(rdp));
 	rcu_lockdep_assert_cblist_protected(rdp);
@@ -310,7 +343,20 @@
 	/* Note: ->cblist.len already accounts for ->nocb_bypass contents. */
 	if (rhp)
 		rcu_segcblist_inc_len(&rdp->cblist); /* Must precede enqueue. */
+
+	/*
+	 * If the new CB requested was a lazy one, queue it onto the main
+	 * ->cblist so that we can take advantage of the grace-period that will
+	 * happen regardless. But queue it onto the bypass list first so that
+	 * the lazy CB is ordered with the existing CBs in the bypass list.
+	 */
+	if (lazy && rhp) {
+		rcu_cblist_enqueue(&rdp->nocb_bypass, rhp);
+		rhp = NULL;
+	}
 	rcu_cblist_flush_enqueue(&rcl, &rdp->nocb_bypass, rhp);
+	WRITE_ONCE(rdp->lazy_len, 0);
+
 	rcu_segcblist_insert_pend_cbs(&rdp->cblist, &rcl);
 	WRITE_ONCE(rdp->nocb_bypass_first, j);
 	rcu_nocb_bypass_unlock(rdp);
@@ -326,13 +372,13 @@
  * Note that this function always returns true if rhp is NULL.
  */
 static bool rcu_nocb_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
-				  unsigned long j)
+				  unsigned long j, bool lazy)
 {
 	if (!rcu_rdp_is_offloaded(rdp))
 		return true;
 	rcu_lockdep_assert_cblist_protected(rdp);
 	rcu_nocb_bypass_lock(rdp);
-	return rcu_nocb_do_flush_bypass(rdp, rhp, j);
+	return rcu_nocb_do_flush_bypass(rdp, rhp, j, lazy);
 }
 
 /*
@@ -345,7 +391,7 @@
 	if (!rcu_rdp_is_offloaded(rdp) ||
 	    !rcu_nocb_bypass_trylock(rdp))
 		return;
-	WARN_ON_ONCE(!rcu_nocb_do_flush_bypass(rdp, NULL, j));
+	WARN_ON_ONCE(!rcu_nocb_do_flush_bypass(rdp, NULL, j, false));
 }
 
 /*
@@ -367,12 +413,14 @@
  * there is only one CPU in operation.
  */
 static bool rcu_nocb_try_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
-				bool *was_alldone, unsigned long flags)
+				bool *was_alldone, unsigned long flags,
+				bool lazy)
 {
 	unsigned long c;
 	unsigned long cur_gp_seq;
 	unsigned long j = jiffies;
 	long ncbs = rcu_cblist_n_cbs(&rdp->nocb_bypass);
+	bool bypass_is_lazy = (ncbs == READ_ONCE(rdp->lazy_len));
 
 	lockdep_assert_irqs_disabled();
 
@@ -417,24 +465,29 @@
 	// If there hasn't yet been all that many ->cblist enqueues
 	// this jiffy, tell the caller to enqueue onto ->cblist.  But flush
 	// ->nocb_bypass first.
-	if (rdp->nocb_nobypass_count < nocb_nobypass_lim_per_jiffy) {
+	// Lazy CBs throttle this back and do immediate bypass queuing.
+	if (rdp->nocb_nobypass_count < nocb_nobypass_lim_per_jiffy && !lazy) {
 		rcu_nocb_lock(rdp);
 		*was_alldone = !rcu_segcblist_pend_cbs(&rdp->cblist);
 		if (*was_alldone)
 			trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
 					    TPS("FirstQ"));
-		WARN_ON_ONCE(!rcu_nocb_flush_bypass(rdp, NULL, j));
+
+		WARN_ON_ONCE(!rcu_nocb_flush_bypass(rdp, NULL, j, false));
 		WARN_ON_ONCE(rcu_cblist_n_cbs(&rdp->nocb_bypass));
 		return false; // Caller must enqueue the callback.
 	}
 
 	// If ->nocb_bypass has been used too long or is too full,
 	// flush ->nocb_bypass to ->cblist.
-	if ((ncbs && j != READ_ONCE(rdp->nocb_bypass_first)) ||
+	if ((ncbs && !bypass_is_lazy && j != READ_ONCE(rdp->nocb_bypass_first)) ||
+	    (ncbs &&  bypass_is_lazy &&
+	     (time_after(j, READ_ONCE(rdp->nocb_bypass_first) + jiffies_till_flush))) ||
 	    ncbs >= qhimark) {
 		rcu_nocb_lock(rdp);
-		if (!rcu_nocb_flush_bypass(rdp, rhp, j)) {
-			*was_alldone = !rcu_segcblist_pend_cbs(&rdp->cblist);
+		*was_alldone = !rcu_segcblist_pend_cbs(&rdp->cblist);
+
+		if (!rcu_nocb_flush_bypass(rdp, rhp, j, lazy)) {
 			if (*was_alldone)
 				trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
 						    TPS("FirstQ"));
@@ -447,7 +500,12 @@
 			rcu_advance_cbs_nowake(rdp->mynode, rdp);
 			rdp->nocb_gp_adv_time = j;
 		}
-		rcu_nocb_unlock_irqrestore(rdp, flags);
+
+		// The flush succeeded and we moved CBs into the regular list.
+		// Don't wait for the wake up timer as it may be too far ahead.
+		// Wake up the GP thread now instead, if the cblist was empty.
+		__call_rcu_nocb_wake(rdp, *was_alldone, flags);
+
 		return true; // Callback already enqueued.
 	}
 
@@ -457,13 +515,24 @@
 	ncbs = rcu_cblist_n_cbs(&rdp->nocb_bypass);
 	rcu_segcblist_inc_len(&rdp->cblist); /* Must precede enqueue. */
 	rcu_cblist_enqueue(&rdp->nocb_bypass, rhp);
+
+	if (lazy)
+		WRITE_ONCE(rdp->lazy_len, rdp->lazy_len + 1);
+
 	if (!ncbs) {
 		WRITE_ONCE(rdp->nocb_bypass_first, j);
 		trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("FirstBQ"));
 	}
 	rcu_nocb_bypass_unlock(rdp);
 	smp_mb(); /* Order enqueue before wake. */
-	if (ncbs) {
+	// A wake up of the grace period kthread or timer adjustment
+	// needs to be done only if:
+	// 1. Bypass list was fully empty before (this is the first
+	//    bypass list entry), or:
+	// 2. Both of these conditions are met:
+	//    a. The bypass list previously had only lazy CBs, and:
+	//    b. The new CB is non-lazy.
+	if (ncbs && (!bypass_is_lazy || lazy)) {
 		local_irq_restore(flags);
 	} else {
 		// No-CBs GP kthread might be indefinitely asleep, if so, wake.
@@ -491,8 +560,10 @@
 				 unsigned long flags)
 				 __releases(rdp->nocb_lock)
 {
+	long bypass_len;
 	unsigned long cur_gp_seq;
 	unsigned long j;
+	long lazy_len;
 	long len;
 	struct task_struct *t;
 
@@ -506,9 +577,16 @@
 	}
 	// Need to actually to a wakeup.
 	len = rcu_segcblist_n_cbs(&rdp->cblist);
+	bypass_len = rcu_cblist_n_cbs(&rdp->nocb_bypass);
+	lazy_len = READ_ONCE(rdp->lazy_len);
 	if (was_alldone) {
 		rdp->qlen_last_fqs_check = len;
-		if (!irqs_disabled_flags(flags)) {
+		// Only lazy CBs in bypass list
+		if (lazy_len && bypass_len == lazy_len) {
+			rcu_nocb_unlock_irqrestore(rdp, flags);
+			wake_nocb_gp_defer(rdp, RCU_NOCB_WAKE_LAZY,
+					   TPS("WakeLazy"));
+		} else if (!irqs_disabled_flags(flags)) {
 			/* ... if queue was empty ... */
 			rcu_nocb_unlock_irqrestore(rdp, flags);
 			wake_nocb_gp(rdp, false);
@@ -599,12 +677,12 @@
 static void nocb_gp_wait(struct rcu_data *my_rdp)
 {
 	bool bypass = false;
-	long bypass_ncbs;
 	int __maybe_unused cpu = my_rdp->cpu;
 	unsigned long cur_gp_seq;
 	unsigned long flags;
 	bool gotcbs = false;
 	unsigned long j = jiffies;
+	bool lazy = false;
 	bool needwait_gp = false; // This prevents actual uninitialized use.
 	bool needwake;
 	bool needwake_gp;
@@ -634,24 +712,43 @@
 	 * won't be ignored for long.
 	 */
 	list_for_each_entry(rdp, &my_rdp->nocb_head_rdp, nocb_entry_rdp) {
+		long bypass_ncbs;
+		bool flush_bypass = false;
+		long lazy_ncbs;
+
 		trace_rcu_nocb_wake(rcu_state.name, rdp->cpu, TPS("Check"));
 		rcu_nocb_lock_irqsave(rdp, flags);
 		lockdep_assert_held(&rdp->nocb_lock);
 		bypass_ncbs = rcu_cblist_n_cbs(&rdp->nocb_bypass);
-		if (bypass_ncbs &&
+		lazy_ncbs = READ_ONCE(rdp->lazy_len);
+
+		if (bypass_ncbs && (lazy_ncbs == bypass_ncbs) &&
+		    (time_after(j, READ_ONCE(rdp->nocb_bypass_first) + jiffies_till_flush) ||
+		     bypass_ncbs > 2 * qhimark)) {
+			flush_bypass = true;
+		} else if (bypass_ncbs && (lazy_ncbs != bypass_ncbs) &&
 		    (time_after(j, READ_ONCE(rdp->nocb_bypass_first) + 1) ||
 		     bypass_ncbs > 2 * qhimark)) {
-			// Bypass full or old, so flush it.
-			(void)rcu_nocb_try_flush_bypass(rdp, j);
-			bypass_ncbs = rcu_cblist_n_cbs(&rdp->nocb_bypass);
+			flush_bypass = true;
 		} else if (!bypass_ncbs && rcu_segcblist_empty(&rdp->cblist)) {
 			rcu_nocb_unlock_irqrestore(rdp, flags);
 			continue; /* No callbacks here, try next. */
 		}
+
+		if (flush_bypass) {
+			// Bypass full or old, so flush it.
+			(void)rcu_nocb_try_flush_bypass(rdp, j);
+			bypass_ncbs = rcu_cblist_n_cbs(&rdp->nocb_bypass);
+			lazy_ncbs = READ_ONCE(rdp->lazy_len);
+		}
+
 		if (bypass_ncbs) {
 			trace_rcu_nocb_wake(rcu_state.name, rdp->cpu,
-					    TPS("Bypass"));
-			bypass = true;
+					    bypass_ncbs == lazy_ncbs ? TPS("Lazy") : TPS("Bypass"));
+			if (bypass_ncbs == lazy_ncbs)
+				lazy = true;
+			else
+				bypass = true;
 		}
 		rnp = rdp->mynode;
 
@@ -699,12 +796,20 @@
 	my_rdp->nocb_gp_gp = needwait_gp;
 	my_rdp->nocb_gp_seq = needwait_gp ? wait_gp_seq : 0;
 
-	if (bypass && !rcu_nocb_poll) {
-		// At least one child with non-empty ->nocb_bypass, so set
-		// timer in order to avoid stranding its callbacks.
-		wake_nocb_gp_defer(my_rdp, RCU_NOCB_WAKE_BYPASS,
-				   TPS("WakeBypassIsDeferred"));
+	// At least one child with non-empty ->nocb_bypass, so set
+	// timer in order to avoid stranding its callbacks.
+	if (!rcu_nocb_poll) {
+		// If bypass list only has lazy CBs. Add a deferred lazy wake up.
+		if (lazy && !bypass) {
+			wake_nocb_gp_defer(my_rdp, RCU_NOCB_WAKE_LAZY,
+					TPS("WakeLazyIsDeferred"));
+		// Otherwise add a deferred bypass wake up.
+		} else if (bypass) {
+			wake_nocb_gp_defer(my_rdp, RCU_NOCB_WAKE_BYPASS,
+					TPS("WakeBypassIsDeferred"));
+		}
 	}
+
 	if (rcu_nocb_poll) {
 		/* Polling, so trace if first poll in the series. */
 		if (gotcbs)
@@ -1030,7 +1135,7 @@
 	 * return false, which means that future calls to rcu_nocb_try_bypass()
 	 * will refuse to put anything into the bypass.
 	 */
-	WARN_ON_ONCE(!rcu_nocb_flush_bypass(rdp, NULL, jiffies));
+	WARN_ON_ONCE(!rcu_nocb_flush_bypass(rdp, NULL, jiffies, false));
 	/*
 	 * Start with invoking rcu_core() early. This way if the current thread
 	 * happens to preempt an ongoing call to rcu_core() in the middle,
@@ -1207,47 +1312,87 @@
 }
 EXPORT_SYMBOL_GPL(rcu_nocb_cpu_offload);
 
+static unsigned long
+lazy_rcu_shrink_count(struct shrinker *shrink, struct shrink_control *sc)
+{
+	int cpu;
+	unsigned long count = 0;
+
+	/* Snapshot count of all CPUs */
+	for_each_possible_cpu(cpu) {
+		struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu);
+
+		count +=  READ_ONCE(rdp->lazy_len);
+	}
+
+	return count ? count : SHRINK_EMPTY;
+}
+
+static unsigned long
+lazy_rcu_shrink_scan(struct shrinker *shrink, struct shrink_control *sc)
+{
+	int cpu;
+	unsigned long flags;
+	unsigned long count = 0;
+
+	/* Snapshot count of all CPUs */
+	for_each_possible_cpu(cpu) {
+		struct rcu_data *rdp = per_cpu_ptr(&rcu_data, cpu);
+		int _count = READ_ONCE(rdp->lazy_len);
+
+		if (_count == 0)
+			continue;
+		rcu_nocb_lock_irqsave(rdp, flags);
+		WRITE_ONCE(rdp->lazy_len, 0);
+		rcu_nocb_unlock_irqrestore(rdp, flags);
+		wake_nocb_gp(rdp, false);
+		sc->nr_to_scan -= _count;
+		count += _count;
+		if (sc->nr_to_scan <= 0)
+			break;
+	}
+	return count ? count : SHRINK_STOP;
+}
+
+static struct shrinker lazy_rcu_shrinker = {
+	.count_objects = lazy_rcu_shrink_count,
+	.scan_objects = lazy_rcu_shrink_scan,
+	.batch = 0,
+	.seeks = DEFAULT_SEEKS,
+};
+
 void __init rcu_init_nohz(void)
 {
 	int cpu;
-	bool need_rcu_nocb_mask = false;
-	bool offload_all = false;
 	struct rcu_data *rdp;
-
-#if defined(CONFIG_RCU_NOCB_CPU_DEFAULT_ALL)
-	if (!rcu_state.nocb_is_setup) {
-		need_rcu_nocb_mask = true;
-		offload_all = true;
-	}
-#endif /* #if defined(CONFIG_RCU_NOCB_CPU_DEFAULT_ALL) */
+	const struct cpumask *cpumask = NULL;
 
 #if defined(CONFIG_NO_HZ_FULL)
-	if (tick_nohz_full_running && !cpumask_empty(tick_nohz_full_mask)) {
-		need_rcu_nocb_mask = true;
-		offload_all = false; /* NO_HZ_FULL has its own mask. */
-	}
-#endif /* #if defined(CONFIG_NO_HZ_FULL) */
+	if (tick_nohz_full_running && !cpumask_empty(tick_nohz_full_mask))
+		cpumask = tick_nohz_full_mask;
+#endif
 
-	if (need_rcu_nocb_mask) {
+	if (IS_ENABLED(CONFIG_RCU_NOCB_CPU_DEFAULT_ALL) &&
+	    !rcu_state.nocb_is_setup && !cpumask)
+		cpumask = cpu_possible_mask;
+
+	if (cpumask) {
 		if (!cpumask_available(rcu_nocb_mask)) {
 			if (!zalloc_cpumask_var(&rcu_nocb_mask, GFP_KERNEL)) {
 				pr_info("rcu_nocb_mask allocation failed, callback offloading disabled.\n");
 				return;
 			}
 		}
+
+		cpumask_or(rcu_nocb_mask, rcu_nocb_mask, cpumask);
 		rcu_state.nocb_is_setup = true;
 	}
 
 	if (!rcu_state.nocb_is_setup)
 		return;
 
-#if defined(CONFIG_NO_HZ_FULL)
-	if (tick_nohz_full_running)
-		cpumask_or(rcu_nocb_mask, rcu_nocb_mask, tick_nohz_full_mask);
-#endif /* #if defined(CONFIG_NO_HZ_FULL) */
-
-	if (offload_all)
-		cpumask_setall(rcu_nocb_mask);
+	if (register_shrinker(&lazy_rcu_shrinker, "rcu-lazy"))
+		pr_err("Failed to register lazy_rcu shrinker!\n");
 
 	if (!cpumask_subset(rcu_nocb_mask, cpu_possible_mask)) {
 		pr_info("\tNote: kernel parameter 'rcu_nocbs=', 'nohz_full', or 'isolcpus=' contains nonexistent CPUs.\n");
@@ -1284,6 +1429,7 @@
 	raw_spin_lock_init(&rdp->nocb_gp_lock);
 	timer_setup(&rdp->nocb_timer, do_nocb_deferred_wakeup_timer, 0);
 	rcu_cblist_init(&rdp->nocb_bypass);
+	WRITE_ONCE(rdp->lazy_len, 0);
 	mutex_init(&rdp->nocb_gp_kthread_mutex);
 }
 
@@ -1564,14 +1710,19 @@
 {
 }
 
+static bool wake_nocb_gp(struct rcu_data *rdp, bool force)
+{
+	return false;
+}
+
 static bool rcu_nocb_flush_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
-				  unsigned long j)
+				  unsigned long j, bool lazy)
 {
 	return true;
 }
 
 static bool rcu_nocb_try_bypass(struct rcu_data *rdp, struct rcu_head *rhp,
-				bool *was_alldone, unsigned long flags)
+				bool *was_alldone, unsigned long flags, bool lazy)
 {
 	return false;
 }
diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
index e3142ee..7b0fe74 100644
--- a/kernel/rcu/tree_plugin.h
+++ b/kernel/rcu/tree_plugin.h
@@ -1221,11 +1221,13 @@
  * We don't include outgoingcpu in the affinity set, use -1 if there is
  * no outgoing CPU.  If there are no CPUs left in the affinity set,
  * this function allows the kthread to execute on any CPU.
+ *
+ * Any future concurrent calls are serialized via ->boost_kthread_mutex.
  */
 static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu)
 {
 	struct task_struct *t = rnp->boost_kthread_task;
-	unsigned long mask = rcu_rnp_online_cpus(rnp);
+	unsigned long mask;
 	cpumask_var_t cm;
 	int cpu;
 
@@ -1234,6 +1236,7 @@
 	if (!zalloc_cpumask_var(&cm, GFP_KERNEL))
 		return;
 	mutex_lock(&rnp->boost_kthread_mutex);
+	mask = rcu_rnp_online_cpus(rnp);
 	for_each_leaf_node_possible_cpu(rnp, cpu)
 		if ((mask & leaf_node_cpu_bit(rnp, cpu)) &&
 		    cpu != outgoingcpu)
diff --git a/kernel/rcu/update.c b/kernel/rcu/update.c
index 738842c..f5e6a2f 100644
--- a/kernel/rcu/update.c
+++ b/kernel/rcu/update.c
@@ -224,7 +224,7 @@
 	synchronize_rcu_expedited();
 }
 
-#if !defined(CONFIG_TINY_RCU) || defined(CONFIG_SRCU)
+#if !defined(CONFIG_TINY_RCU)
 
 /*
  * Switch to run-time mode once RCU has fully initialized.
@@ -239,7 +239,7 @@
 }
 core_initcall(rcu_set_runtime_mode);
 
-#endif /* #if !defined(CONFIG_TINY_RCU) || defined(CONFIG_SRCU) */
+#endif /* #if !defined(CONFIG_TINY_RCU) */
 
 #ifdef CONFIG_DEBUG_LOCK_ALLOC
 static struct lock_class_key rcu_lock_key;
@@ -559,10 +559,8 @@
 	struct early_boot_kfree_rcu *rhp;
 
 	call_rcu(&head, test_callback);
-	if (IS_ENABLED(CONFIG_SRCU)) {
-		early_srcu_cookie = start_poll_synchronize_srcu(&early_srcu);
-		call_srcu(&early_srcu, &shead, test_callback);
-	}
+	early_srcu_cookie = start_poll_synchronize_srcu(&early_srcu);
+	call_srcu(&early_srcu, &shead, test_callback);
 	rhp = kmalloc(sizeof(*rhp), GFP_KERNEL);
 	if (!WARN_ON_ONCE(!rhp))
 		kfree_rcu(rhp, rh);
@@ -585,11 +583,9 @@
 	if (rcu_self_test) {
 		early_boot_test_counter++;
 		rcu_barrier();
-		if (IS_ENABLED(CONFIG_SRCU)) {
-			early_boot_test_counter++;
-			srcu_barrier(&early_srcu);
-			WARN_ON_ONCE(!poll_state_synchronize_srcu(&early_srcu, early_srcu_cookie));
-		}
+		early_boot_test_counter++;
+		srcu_barrier(&early_srcu);
+		WARN_ON_ONCE(!poll_state_synchronize_srcu(&early_srcu, early_srcu_cookie));
 	}
 	if (rcu_self_test_counter != early_boot_test_counter) {
 		WARN_ON(1);
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 7cd5f5e..07895de 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1771,7 +1771,7 @@
 
 	if (!test_and_set_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(work))) {
 		rwork->wq = wq;
-		call_rcu(&rwork->rcu, rcu_work_rcufn);
+		call_rcu_hurry(&rwork->rcu, rcu_work_rcufn);
 		return true;
 	}
 
diff --git a/lib/Kconfig.kcsan b/lib/Kconfig.kcsan
index 47a693c..375575a 100644
--- a/lib/Kconfig.kcsan
+++ b/lib/Kconfig.kcsan
@@ -125,7 +125,7 @@
 	default 4000
 	help
 	  The number of per-CPU memory operations to skip, before another
-	  watchpoint is set up, i.e. one in KCSAN_WATCH_SKIP per-CPU
+	  watchpoint is set up, i.e. one in KCSAN_SKIP_WATCH per-CPU
 	  memory operations are used to set up a watchpoint. A smaller value
 	  results in more aggressive race detection, whereas a larger value
 	  improves system performance at the cost of missing some races.
@@ -135,8 +135,8 @@
 	default y
 	help
 	  If instruction skip count should be randomized, where the maximum is
-	  KCSAN_WATCH_SKIP. If false, the chosen value is always
-	  KCSAN_WATCH_SKIP.
+	  KCSAN_SKIP_WATCH. If false, the chosen value is always
+	  KCSAN_SKIP_WATCH.
 
 config KCSAN_INTERRUPT_WATCHER
 	bool "Interruptible watchers" if !KCSAN_STRICT
diff --git a/lib/percpu-refcount.c b/lib/percpu-refcount.c
index e5c5315..668f6aa 100644
--- a/lib/percpu-refcount.c
+++ b/lib/percpu-refcount.c
@@ -230,7 +230,8 @@
 		percpu_ref_noop_confirm_switch;
 
 	percpu_ref_get(ref);	/* put after confirmation */
-	call_rcu(&ref->data->rcu, percpu_ref_switch_to_atomic_rcu);
+	call_rcu_hurry(&ref->data->rcu,
+		       percpu_ref_switch_to_atomic_rcu);
 }
 
 static void __percpu_ref_switch_to_percpu(struct percpu_ref *ref)
diff --git a/net/core/dst.c b/net/core/dst.c
index bc9c9be..a4e738d 100644
--- a/net/core/dst.c
+++ b/net/core/dst.c
@@ -174,7 +174,7 @@
 			net_warn_ratelimited("%s: dst:%p refcnt:%d\n",
 					     __func__, dst, newrefcnt);
 		if (!newrefcnt)
-			call_rcu(&dst->rcu_head, dst_destroy_rcu);
+			call_rcu_hurry(&dst->rcu_head, dst_destroy_rcu);
 	}
 }
 EXPORT_SYMBOL(dst_release);
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index e8b9a92..b0acf6e 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -234,13 +234,20 @@
 	call_rcu(&ifa->rcu_head, inet_rcu_free_ifa);
 }
 
+static void in_dev_free_rcu(struct rcu_head *head)
+{
+	struct in_device *idev = container_of(head, struct in_device, rcu_head);
+
+	kfree(rcu_dereference_protected(idev->mc_hash, 1));
+	kfree(idev);
+}
+
 void in_dev_finish_destroy(struct in_device *idev)
 {
 	struct net_device *dev = idev->dev;
 
 	WARN_ON(idev->ifa_list);
 	WARN_ON(idev->mc_list);
-	kfree(rcu_dereference_protected(idev->mc_hash, 1));
 #ifdef NET_REFCNT_DEBUG
 	pr_debug("%s: %p=%s\n", __func__, idev, dev ? dev->name : "NIL");
 #endif
@@ -248,7 +255,7 @@
 	if (!idev->dead)
 		pr_err("Freeing alive in_device %p\n", idev);
 	else
-		kfree(idev);
+		call_rcu(&idev->rcu_head, in_dev_free_rcu);
 }
 EXPORT_SYMBOL(in_dev_finish_destroy);
 
@@ -298,12 +305,6 @@
 	goto out;
 }
 
-static void in_dev_rcu_put(struct rcu_head *head)
-{
-	struct in_device *idev = container_of(head, struct in_device, rcu_head);
-	in_dev_put(idev);
-}
-
 static void inetdev_destroy(struct in_device *in_dev)
 {
 	struct net_device *dev;
@@ -328,7 +329,7 @@
 	neigh_parms_release(&arp_tbl, in_dev->arp_parms);
 	arp_ifdown(dev);
 
-	call_rcu(&in_dev->rcu_head, in_dev_rcu_put);
+	in_dev_put(in_dev);
 }
 
 int inet_addr_onlink(struct in_device *in_dev, __be32 a, __be32 b)
diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index 43ec14c..a7f1e6c 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -999,6 +999,16 @@
 	"__tsan_read_write4",
 	"__tsan_read_write8",
 	"__tsan_read_write16",
+	"__tsan_volatile_read1",
+	"__tsan_volatile_read2",
+	"__tsan_volatile_read4",
+	"__tsan_volatile_read8",
+	"__tsan_volatile_read16",
+	"__tsan_volatile_write1",
+	"__tsan_volatile_write2",
+	"__tsan_volatile_write4",
+	"__tsan_volatile_write8",
+	"__tsan_volatile_write16",
 	"__tsan_atomic8_load",
 	"__tsan_atomic16_load",
 	"__tsan_atomic32_load",
diff --git a/tools/testing/selftests/rcutorture/bin/config2csv.sh b/tools/testing/selftests/rcutorture/bin/config2csv.sh
index d5a1663..0cf55f1 100755
--- a/tools/testing/selftests/rcutorture/bin/config2csv.sh
+++ b/tools/testing/selftests/rcutorture/bin/config2csv.sh
@@ -30,9 +30,8 @@
 fi
 scenarios="`echo $scenariosarg | sed -e "s/\<CFLIST\>/$defaultconfigs/g"`"
 
-T=/tmp/config2latex.sh.$$
+T=`mktemp -d /tmp/config2latex.sh.XXXXXX`
 trap 'rm -rf $T' 0
-mkdir $T
 
 cat << '---EOF---' >> $T/p.awk
 END	{
diff --git a/tools/testing/selftests/rcutorture/bin/config_override.sh b/tools/testing/selftests/rcutorture/bin/config_override.sh
index 90016c3..b3d2e7e 100755
--- a/tools/testing/selftests/rcutorture/bin/config_override.sh
+++ b/tools/testing/selftests/rcutorture/bin/config_override.sh
@@ -29,9 +29,8 @@
 	exit 1
 fi
 
-T=${TMPDIR-/tmp}/config_override.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/config_override.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
 
 sed < $override -e 's/^/grep -v "/' -e 's/=.*$/="/' |
 	awk '
diff --git a/tools/testing/selftests/rcutorture/bin/configcheck.sh b/tools/testing/selftests/rcutorture/bin/configcheck.sh
index 31584ce..83fac18 100755
--- a/tools/testing/selftests/rcutorture/bin/configcheck.sh
+++ b/tools/testing/selftests/rcutorture/bin/configcheck.sh
@@ -7,9 +7,8 @@
 #
 # Authors: Paul E. McKenney <paulmck@linux.ibm.com>
 
-T=${TMPDIR-/tmp}/abat-chk-config.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/configcheck.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
 
 cat $1 > $T/.config
 
diff --git a/tools/testing/selftests/rcutorture/bin/configinit.sh b/tools/testing/selftests/rcutorture/bin/configinit.sh
index d6e5ce0..28bdb3a 100755
--- a/tools/testing/selftests/rcutorture/bin/configinit.sh
+++ b/tools/testing/selftests/rcutorture/bin/configinit.sh
@@ -15,9 +15,8 @@
 #
 # Authors: Paul E. McKenney <paulmck@linux.ibm.com>
 
-T=${TMPDIR-/tmp}/configinit.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/configinit.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
 
 # Capture config spec file.
 
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-again.sh b/tools/testing/selftests/rcutorture/bin/kvm-again.sh
index 0941f1d..8a968fb 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-again.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-again.sh
@@ -12,9 +12,8 @@
 scriptname=$0
 args="$*"
 
-T=${TMPDIR-/tmp}/kvm-again.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/kvm-again.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
 
 if ! test -d tools/testing/selftests/rcutorture/bin
 then
@@ -51,27 +50,56 @@
 PATH=${RCUTORTURE}/bin:$PATH; export PATH
 . functions.sh
 
+bootargs=
 dryrun=
 dur=
 default_link="cp -R"
-rundir="`pwd`/tools/testing/selftests/rcutorture/res/`date +%Y.%m.%d-%H.%M.%S-again`"
+resdir="`pwd`/tools/testing/selftests/rcutorture/res"
+rundir="$resdir/`date +%Y.%m.%d-%H.%M.%S-again`"
+got_datestamp=
+got_rundir=
 
 startdate="`date`"
 starttime="`get_starttime`"
 
 usage () {
 	echo "Usage: $scriptname $oldrun [ arguments ]:"
+	echo "       --bootargs kernel-boot-arguments"
+	echo "       --datestamp string"
 	echo "       --dryrun"
 	echo "       --duration minutes | <seconds>s | <hours>h | <days>d"
 	echo "       --link hard|soft|copy"
 	echo "       --remote"
 	echo "       --rundir /new/res/path"
+	echo "Command line: $scriptname $args"
 	exit 1
 }
 
 while test $# -gt 0
 do
 	case "$1" in
+	--bootargs|--bootarg)
+		checkarg --bootargs "(list of kernel boot arguments)" "$#" "$2" '.*' '^--'
+		bootargs="$bootargs $2"
+		shift
+		;;
+	--datestamp)
+		checkarg --datestamp "(relative pathname)" "$#" "$2" '^[a-zA-Z0-9._/-]*$' '^--'
+		if test -n "$got_rundir" || test -n "$got_datestamp"
+		then
+			echo Only one of --datestamp or --rundir may be specified
+			usage
+		fi
+		got_datestamp=y
+		ds=$2
+		rundir="$resdir/$ds"
+		if test -e "$rundir"
+		then
+			echo "--datestamp $2: Already exists."
+			usage
+		fi
+		shift
+		;;
 	--dryrun)
 		dryrun=1
 		;;
@@ -113,6 +141,12 @@
 		;;
 	--rundir)
 		checkarg --rundir "(absolute pathname)" "$#" "$2" '^/' '^error'
+		if test -n "$got_rundir" || test -n "$got_datestamp"
+		then
+			echo Only one of --datestamp or --rundir may be specified
+			usage
+		fi
+		got_rundir=y
 		rundir=$2
 		if test -e "$rundir"
 		then
@@ -122,8 +156,11 @@
 		shift
 		;;
 	*)
-		echo Unknown argument $1
-		usage
+		if test -n "$1"
+		then
+			echo Unknown argument $1
+			usage
+		fi
 		;;
 	esac
 	shift
@@ -156,7 +193,7 @@
 	qemu_cmd_dir="`dirname "$i"`"
 	kernel_dir="`echo $qemu_cmd_dir | sed -e 's/\.[0-9]\+$//'`"
 	jitter_dir="`dirname "$kernel_dir"`"
-	kvm-transform.sh "$kernel_dir/bzImage" "$qemu_cmd_dir/console.log" "$jitter_dir" $dur < $T/qemu-cmd > $i
+	kvm-transform.sh "$kernel_dir/bzImage" "$qemu_cmd_dir/console.log" "$jitter_dir" $dur "$bootargs" < $T/qemu-cmd > $i
 	if test -n "$arg_remote"
 	then
 		echo "# TORTURE_KCONFIG_GDB_ARG=''" >> $i
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-assign-cpus.sh b/tools/testing/selftests/rcutorture/bin/kvm-assign-cpus.sh
index f99b2c1..46b08cd 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-assign-cpus.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-assign-cpus.sh
@@ -7,9 +7,8 @@
 #
 # Usage: kvm-assign-cpus.sh /path/to/sysfs
 
-T=/tmp/kvm-assign-cpus.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/kvm-assign-cpus.sh.XXXXXX`"
 trap 'rm -rf $T' 0 2
-mkdir $T
 
 sysfsdir=${1-/sys/devices/system/node}
 if ! cd "$sysfsdir" > $T/msg 2>&1
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-build.sh b/tools/testing/selftests/rcutorture/bin/kvm-build.sh
index 5ad973d..e28a828 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-build.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-build.sh
@@ -23,9 +23,8 @@
 fi
 resdir=${2}
 
-T=${TMPDIR-/tmp}/test-linux.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/kvm-build.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
 
 cp ${config_template} $T/config
 cat << ___EOF___ >> $T/config
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh b/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh
index ee886b4..2b56bac 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-end-run-stats.sh
@@ -18,9 +18,8 @@
 	exit 1
 fi
 
-T=${TMPDIR-/tmp}/kvm-end-run-stats.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/kvm-end-run-stats.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
 
 RCUTORTURE="`pwd`/tools/testing/selftests/rcutorture"; export RCUTORTURE
 PATH=${RCUTORTURE}/bin:$PATH; export PATH
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
index 0789c56..1df7e69 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-recheck.sh
@@ -30,7 +30,7 @@
 			resdir=`echo $i | sed -e 's,/$,,' -e 's,/[^/]*$,,'`
 			head -1 $resdir/log
 		fi
-		TORTURE_SUITE="`cat $i/../torture_suite`"
+		TORTURE_SUITE="`cat $i/../torture_suite`" ; export TORTURE_SUITE
 		configfile=`echo $i | sed -e 's,^.*/,,'`
 		rm -f $i/console.log.*.diags
 		case "${TORTURE_SUITE}" in
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-remote.sh b/tools/testing/selftests/rcutorture/bin/kvm-remote.sh
index 9f0a5d5..a232816 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-remote.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-remote.sh
@@ -34,19 +34,18 @@
 shift
 
 # Pathnames:
-# T:	  /tmp/kvm-remote.sh.$$
-# resdir: /tmp/kvm-remote.sh.$$/res
-# rundir: /tmp/kvm-remote.sh.$$/res/$ds ("-remote" suffix)
+# T:	  /tmp/kvm-remote.sh.NNNNNN where "NNNNNN" is set by mktemp
+# resdir: /tmp/kvm-remote.sh.NNNNNN/res
+# rundir: /tmp/kvm-remote.sh.NNNNNN/res/$ds ("-remote" suffix)
 # oldrun: `pwd`/tools/testing/.../res/$otherds
 #
 # Pathname segments:
-# TD:	  kvm-remote.sh.$$
+# TD:	  kvm-remote.sh.NNNNNN
 # ds:	  yyyy.mm.dd-hh.mm.ss-remote
 
-TD=kvm-remote.sh.$$
-T=${TMPDIR-/tmp}/$TD
+T="`mktemp -d ${TMPDIR-/tmp}/kvm-remote.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
+TD="`basename "$T"`"
 
 resdir="$T/res"
 ds=`date +%Y.%m.%d-%H.%M.%S`-remote
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh
index 1e29d65..c3808c4 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-batch.sh
@@ -13,9 +13,8 @@
 #
 # Authors: Paul E. McKenney <paulmck@kernel.org>
 
-T=${TMPDIR-/tmp}/kvm-test-1-run-batch.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/kvm-test-1-run-batch.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
 
 echo ---- Running batch $*
 # Check arguments
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh
index 4428058..76f24cd 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run-qemu.sh
@@ -17,9 +17,8 @@
 #
 # Authors: Paul E. McKenney <paulmck@kernel.org>
 
-T=${TMPDIR-/tmp}/kvm-test-1-run-qemu.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/kvm-test-1-run-qemu.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
 
 resdir="$1"
 if ! test -d "$resdir"
@@ -109,7 +108,7 @@
 		if test $kruntime -lt $seconds
 		then
 			echo Completed in $kruntime vs. $seconds >> $resdir/Warnings 2>&1
-			grep "^(qemu) qemu:" $resdir/kvm-test-1-run.sh.out >> $resdir/Warnings 2>&1
+			grep "^(qemu) qemu:" $resdir/kvm-test-1-run*.sh.out >> $resdir/Warnings 2>&1
 			killpid="`sed -n "s/^(qemu) qemu: terminating on signal [0-9]* from pid \([0-9]*\).*$/\1/p" $resdir/Warnings`"
 			if test -n "$killpid"
 			then
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
index f4c8055..d2a3710 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh
@@ -25,9 +25,8 @@
 #
 # Authors: Paul E. McKenney <paulmck@linux.ibm.com>
 
-T=${TMPDIR-/tmp}/kvm-test-1-run.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/kvm-test-1-run.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
 
 . functions.sh
 . $CONFIGFRAG/ver_functions.sh
diff --git a/tools/testing/selftests/rcutorture/bin/kvm-transform.sh b/tools/testing/selftests/rcutorture/bin/kvm-transform.sh
index d40b4e6..75a2610 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm-transform.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm-transform.sh
@@ -3,10 +3,14 @@
 #
 # Transform a qemu-cmd file to allow reuse.
 #
-# Usage: kvm-transform.sh bzImage console.log jitter_dir [ seconds ] < qemu-cmd-in > qemu-cmd-out
+# Usage: kvm-transform.sh bzImage console.log jitter_dir seconds [ bootargs ] < qemu-cmd-in > qemu-cmd-out
 #
 #	bzImage: Kernel and initrd from the same prior kvm.sh run.
 #	console.log: File into which to place console output.
+#	jitter_dir: Jitter directory for TORTURE_JITTER_START and
+#		TORTURE_JITTER_STOP environment variables.
+#	seconds: Run duaration for *.shutdown_secs module parameter.
+#	bootargs: New kernel boot parameters.  Beware of Robert Tables.
 #
 # The original qemu-cmd file is provided on standard input.
 # The transformed qemu-cmd file is on standard output.
@@ -17,6 +21,9 @@
 #
 # Authors: Paul E. McKenney <paulmck@kernel.org>
 
+T=`mktemp -d /tmp/kvm-transform.sh.XXXXXXXXXX`
+trap 'rm -rf $T' 0 2
+
 image="$1"
 if test -z "$image"
 then
@@ -41,9 +48,17 @@
 	echo "Invalid duration, should be numeric in seconds: '$seconds'"
 	exit 1
 fi
+bootargs="$5"
 
-awk -v image="$image" -v consolelog="$consolelog" -v jitter_dir="$jitter_dir" \
-    -v seconds="$seconds" '
+# Build awk program.
+echo "BEGIN {" > $T/bootarg.awk
+echo $bootargs | tr -s ' ' '\012' |
+	awk -v dq='"' '/./ { print "\tbootarg[" NR "] = " dq $1 dq ";" }' >> $T/bootarg.awk
+echo $bootargs | tr -s ' ' '\012' | sed -e 's/=.*$//' |
+	awk -v dq='"' '/./ { print "\tbootpar[" NR "] = " dq $1 dq ";" }' >> $T/bootarg.awk
+cat >> $T/bootarg.awk << '___EOF___'
+}
+
 /^# seconds=/ {
 	if (seconds == "")
 		print $0;
@@ -70,13 +85,7 @@
 {
 	line = "";
 	for (i = 1; i <= NF; i++) {
-		if ("" seconds != "" && $i ~ /\.shutdown_secs=[0-9]*$/) {
-			sub(/[0-9]*$/, seconds, $i);
-			if (line == "")
-				line = $i;
-			else
-				line = line " " $i;
-		} else if (line == "") {
+		if (line == "") {
 			line = $i;
 		} else {
 			line = line " " $i;
@@ -87,7 +96,44 @@
 		} else if ($i == "-kernel") {
 			i++;
 			line = line " " image;
+		} else if ($i == "-append") {
+			for (i++; i <= NF; i++) {
+				arg = $i;
+				lq = "";
+				rq = "";
+				if ("" seconds != "" && $i ~ /\.shutdown_secs=[0-9]*$/)
+					sub(/[0-9]*$/, seconds, arg);
+				if (arg ~ /^"/) {
+					lq = substr(arg, 1, 1);
+					arg  = substr(arg, 2);
+				}
+				if (arg ~ /"$/) {
+					rq = substr(arg, length($i), 1);
+					arg = substr(arg, 1, length($i) - 1);
+				}
+				par = arg;
+				gsub(/=.*$/, "", par);
+				j = 1;
+				while (bootpar[j] != "") {
+					if (bootpar[j] == par) {
+						arg = "";
+						break;
+					}
+					j++;
+				}
+				if (line == "")
+					line = lq arg;
+				else
+					line = line " " lq arg;
+			}
+			for (j in bootarg)
+				line = line " " bootarg[j];
+			line = line rq;
 		}
 	}
 	print line;
-}'
+}
+___EOF___
+
+awk -v image="$image" -v consolelog="$consolelog" -v jitter_dir="$jitter_dir" \
+    -v seconds="$seconds" -f $T/bootarg.awk
diff --git a/tools/testing/selftests/rcutorture/bin/kvm.sh b/tools/testing/selftests/rcutorture/bin/kvm.sh
index 6c73481..7710b1e 100755
--- a/tools/testing/selftests/rcutorture/bin/kvm.sh
+++ b/tools/testing/selftests/rcutorture/bin/kvm.sh
@@ -14,9 +14,8 @@
 scriptname=$0
 args="$*"
 
-T=${TMPDIR-/tmp}/kvm.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/kvm.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
 
 cd `dirname $scriptname`/../../../../../
 
diff --git a/tools/testing/selftests/rcutorture/bin/parse-build.sh b/tools/testing/selftests/rcutorture/bin/parse-build.sh
index 2dbfca3..5a0b7ff 100755
--- a/tools/testing/selftests/rcutorture/bin/parse-build.sh
+++ b/tools/testing/selftests/rcutorture/bin/parse-build.sh
@@ -15,9 +15,8 @@
 
 F=$1
 title=$2
-T=${TMPDIR-/tmp}/parse-build.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/parse-build.sh.XXXXXX`"
 trap 'rm -rf $T' 0
-mkdir $T
 
 . functions.sh
 
diff --git a/tools/testing/selftests/rcutorture/bin/torture.sh b/tools/testing/selftests/rcutorture/bin/torture.sh
index d477618..130d0de 100755
--- a/tools/testing/selftests/rcutorture/bin/torture.sh
+++ b/tools/testing/selftests/rcutorture/bin/torture.sh
@@ -206,9 +206,8 @@
 startdate="`date`"
 starttime="`get_starttime`"
 
-T=/tmp/torture.sh.$$
+T="`mktemp -d ${TMPDIR-/tmp}/torture.sh.XXXXXX`"
 trap 'rm -rf $T' 0 2
-mkdir $T
 
 echo " --- " $scriptname $args | tee -a $T/log
 echo " --- Results directory: " $ds | tee -a $T/log
@@ -278,6 +277,8 @@
 	then
 		cat $T/$curflavor.out | tee -a $T/log
 		echo retcode=$retcode | tee -a $T/log
+	else
+		echo $resdir > $T/last-resdir
 	fi
 	if test "$retcode" == 0
 	then
@@ -303,10 +304,12 @@
 	shift
 	curflavor=$flavor
 	torture_one "$@"
+	mv $T/last-resdir $T/last-resdir-nodebug || :
 	if test "$do_kasan" = "yes"
 	then
 		curflavor=${flavor}-kasan
 		torture_one "$@" --kasan
+		mv $T/last-resdir $T/last-resdir-kasan || :
 	fi
 	if test "$do_kcsan" = "yes"
 	then
@@ -317,6 +320,7 @@
 			cur_kcsan_kmake_args="$kcsan_kmake_args"
 		fi
 		torture_one "$@" --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" $kcsan_kmake_tag $cur_kcsan_kmake_args --kcsan
+		mv $T/last-resdir $T/last-resdir-kcsan || :
 	fi
 }
 
@@ -326,20 +330,34 @@
 	echo " --- allmodconfig:" Start `date` | tee -a $T/log
 	amcdir="tools/testing/selftests/rcutorture/res/$ds/allmodconfig"
 	mkdir -p "$amcdir"
-	echo " --- make clean" > "$amcdir/Make.out" 2>&1
+	echo " --- make clean" | tee $amcdir/log > "$amcdir/Make.out" 2>&1
 	make -j$MAKE_ALLOTED_CPUS clean >> "$amcdir/Make.out" 2>&1
-	echo " --- make allmodconfig" >> "$amcdir/Make.out" 2>&1
-	cp .config $amcdir
-	make -j$MAKE_ALLOTED_CPUS allmodconfig >> "$amcdir/Make.out" 2>&1
-	echo " --- make " >> "$amcdir/Make.out" 2>&1
-	make -j$MAKE_ALLOTED_CPUS >> "$amcdir/Make.out" 2>&1
-	retcode="$?"
-	echo $retcode > "$amcdir/Make.exitcode"
-	if test "$retcode" == 0
+	retcode=$?
+	buildphase='"make clean"'
+	if test "$retcode" -eq 0
+	then
+		echo " --- make allmodconfig" | tee -a $amcdir/log >> "$amcdir/Make.out" 2>&1
+		cp .config $amcdir
+		make -j$MAKE_ALLOTED_CPUS allmodconfig >> "$amcdir/Make.out" 2>&1
+		retcode=$?
+		buildphase='"make allmodconfig"'
+	fi
+	if test "$retcode" -eq 0
+	then
+		echo " --- make " | tee -a $amcdir/log >> "$amcdir/Make.out" 2>&1
+		make -j$MAKE_ALLOTED_CPUS >> "$amcdir/Make.out" 2>&1
+		retcode="$?"
+		echo $retcode > "$amcdir/Make.exitcode"
+		buildphase='"make"'
+	fi
+	if test "$retcode" -eq 0
 	then
 		echo "allmodconfig($retcode)" $amcdir >> $T/successes
+		echo Success >> $amcdir/log
 	else
 		echo "allmodconfig($retcode)" $amcdir >> $T/failures
+		echo " --- allmodconfig Test summary:" >> $amcdir/log
+		echo " --- Summary: Exit code $retcode from $buildphase, see Make.out" >> $amcdir/log
 	fi
 fi
 
@@ -379,11 +397,48 @@
 else
 	primlist=
 fi
+firsttime=1
+do_kasan_save="$do_kasan"
+do_kcsan_save="$do_kcsan"
 for prim in $primlist
 do
-	torture_bootargs="refscale.scale_type="$prim" refscale.nreaders=$HALF_ALLOTED_CPUS refscale.loops=10000 refscale.holdoff=20 torture.disable_onoff_at_boot"
-	torture_set "refscale-$prim" tools/testing/selftests/rcutorture/bin/kvm.sh --torture refscale --allcpus --duration 5 --kconfig "CONFIG_TASKS_TRACE_RCU=y CONFIG_NR_CPUS=$HALF_ALLOTED_CPUS" --bootargs "verbose_batched=$VERBOSE_BATCH_CPUS torture.verbose_sleep_frequency=8 torture.verbose_sleep_duration=$VERBOSE_BATCH_CPUS" --trust-make
+	if test -n "$firsttime"
+	then
+		torture_bootargs="refscale.scale_type="$prim" refscale.nreaders=$HALF_ALLOTED_CPUS refscale.loops=10000 refscale.holdoff=20 torture.disable_onoff_at_boot"
+		torture_set "refscale-$prim" tools/testing/selftests/rcutorture/bin/kvm.sh --torture refscale --allcpus --duration 5 --kconfig "CONFIG_TASKS_TRACE_RCU=y CONFIG_NR_CPUS=$HALF_ALLOTED_CPUS" --bootargs "verbose_batched=$VERBOSE_BATCH_CPUS torture.verbose_sleep_frequency=8 torture.verbose_sleep_duration=$VERBOSE_BATCH_CPUS" --trust-make
+		mv $T/last-resdir-nodebug $T/first-resdir-nodebug || :
+		if test -f "$T/last-resdir-kasan"
+		then
+			mv $T/last-resdir-kasan $T/first-resdir-kasan || :
+		fi
+		if test -f "$T/last-resdir-kcsan"
+		then
+			mv $T/last-resdir-kcsan $T/first-resdir-kcsan || :
+		fi
+		firsttime=
+		do_kasan=
+		do_kcsan=
+	else
+		torture_bootargs=
+		for i in $T/first-resdir-*
+		do
+			case "$i" in
+			*-nodebug)
+				torture_suffix=
+				;;
+			*-kasan)
+				torture_suffix="-kasan"
+				;;
+			*-kcsan)
+				torture_suffix="-kcsan"
+				;;
+			esac
+			torture_set "refscale-$prim$torture_suffix" tools/testing/selftests/rcutorture/bin/kvm-again.sh "`cat "$i"`" --duration 5 --bootargs "refscale.scale_type=$prim"
+		done
+	fi
 done
+do_kasan="$do_kasan_save"
+do_kcsan="$do_kcsan_save"
 
 if test "$do_rcuscale" = yes
 then
@@ -391,11 +446,48 @@
 else
 	primlist=
 fi
+firsttime=1
+do_kasan_save="$do_kasan"
+do_kcsan_save="$do_kcsan"
 for prim in $primlist
 do
-	torture_bootargs="rcuscale.scale_type="$prim" rcuscale.nwriters=$HALF_ALLOTED_CPUS rcuscale.holdoff=20 torture.disable_onoff_at_boot"
-	torture_set "rcuscale-$prim" tools/testing/selftests/rcutorture/bin/kvm.sh --torture rcuscale --allcpus --duration 5 --kconfig "CONFIG_TASKS_TRACE_RCU=y CONFIG_NR_CPUS=$HALF_ALLOTED_CPUS" --trust-make
+	if test -n "$firsttime"
+	then
+		torture_bootargs="rcuscale.scale_type="$prim" rcuscale.nwriters=$HALF_ALLOTED_CPUS rcuscale.holdoff=20 torture.disable_onoff_at_boot"
+		torture_set "rcuscale-$prim" tools/testing/selftests/rcutorture/bin/kvm.sh --torture rcuscale --allcpus --duration 5 --kconfig "CONFIG_TASKS_TRACE_RCU=y CONFIG_NR_CPUS=$HALF_ALLOTED_CPUS" --trust-make
+		mv $T/last-resdir-nodebug $T/first-resdir-nodebug || :
+		if test -f "$T/last-resdir-kasan"
+		then
+			mv $T/last-resdir-kasan $T/first-resdir-kasan || :
+		fi
+		if test -f "$T/last-resdir-kcsan"
+		then
+			mv $T/last-resdir-kcsan $T/first-resdir-kcsan || :
+		fi
+		firsttime=
+		do_kasan=
+		do_kcsan=
+	else
+		torture_bootargs=
+		for i in $T/first-resdir-*
+		do
+			case "$i" in
+			*-nodebug)
+				torture_suffix=
+				;;
+			*-kasan)
+				torture_suffix="-kasan"
+				;;
+			*-kcsan)
+				torture_suffix="-kcsan"
+				;;
+			esac
+			torture_set "rcuscale-$prim$torture_suffix" tools/testing/selftests/rcutorture/bin/kvm-again.sh "`cat "$i"`" --duration 5 --bootargs "rcuscale.scale_type=$prim"
+		done
+	fi
 done
+do_kasan="$do_kasan_save"
+do_kcsan="$do_kcsan_save"
 
 if test "$do_kvfree" = "yes"
 then
@@ -458,7 +550,10 @@
 then
 	# KASAN vmlinux files can approach 1GB in size, so compress them.
 	echo Looking for K[AC]SAN files to compress: `date` > "$tdir/log-xz" 2>&1
-	find "$tdir" -type d -name '*-k[ac]san' -print > $T/xz-todo
+	find "$tdir" -type d -name '*-k[ac]san' -print > $T/xz-todo-all
+	find "$tdir" -type f -name 're-run' -print | sed -e 's,/re-run,,' |
+		grep -e '-k[ac]san$' > $T/xz-todo-copy
+	sort $T/xz-todo-all $T/xz-todo-copy | uniq -u > $T/xz-todo
 	ncompresses=0
 	batchno=1
 	if test -s $T/xz-todo
@@ -490,6 +585,24 @@
 			echo Waiting for final batch $batchno of $ncompresses compressions `date` | tee -a "$tdir/log-xz" | tee -a $T/log
 		fi
 		wait
+		if test -s $T/xz-todo-copy
+		then
+			# The trick here is that we need corresponding
+			# vmlinux files from corresponding scenarios.
+			echo Linking vmlinux.xz files to re-use scenarios `date` | tee -a "$tdir/log-xz" | tee -a $T/log
+			dirstash="`pwd`"
+			for i in `cat $T/xz-todo-copy`
+			do
+				cd $i
+				find . -name vmlinux -print > $T/xz-todo-copy-vmlinux
+				for v in `cat $T/xz-todo-copy-vmlinux`
+				do
+					rm -f "$v"
+					cp -l `cat $i/re-run`/"$i/$v".xz "`dirname "$v"`"
+				done
+				cd "$dirstash"
+			done
+		fi
 		echo Size after compressing $n2compress files: `du -sh $tdir | awk '{ print $1 }'` `date` 2>&1 | tee -a "$tdir/log-xz" | tee -a $T/log
 		echo Total duration `get_starttime_duration $starttime`. | tee -a $T/log
 	else