| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Focusrite Scarlett Gen 2/3 and Clarett+ Driver for ALSA |
| * |
| * Supported models: |
| * - 6i6/18i8/18i20 Gen 2 |
| * - Solo/2i2/4i4/8i6/18i8/18i20 Gen 3 |
| * - Clarett+ 8Pre |
| * |
| * Copyright (c) 2018-2022 by Geoffrey D. Bennett <g at b4.vu> |
| * Copyright (c) 2020-2021 by Vladimir Sadovnikov <sadko4u@gmail.com> |
| * Copyright (c) 2022 by Christian Colglazier <christian@cacolglazier.com> |
| * |
| * Based on the Scarlett (Gen 1) Driver for ALSA: |
| * |
| * Copyright (c) 2013 by Tobias Hoffmann |
| * Copyright (c) 2013 by Robin Gareus <robin at gareus.org> |
| * Copyright (c) 2002 by Takashi Iwai <tiwai at suse.de> |
| * Copyright (c) 2014 by Chris J Arges <chris.j.arges at canonical.com> |
| * |
| * Many codes borrowed from audio.c by |
| * Alan Cox (alan at lxorguk.ukuu.org.uk) |
| * Thomas Sailer (sailer at ife.ee.ethz.ch) |
| * |
| * Code cleanup: |
| * David Henningsson <david.henningsson at canonical.com> |
| */ |
| |
| /* The protocol was reverse engineered by looking at the communication |
| * between Focusrite Control 2.3.4 and the Focusrite(R) Scarlett 18i20 |
| * (firmware 1083) using usbmon in July-August 2018. |
| * |
| * Scarlett 18i8 support added in April 2019. |
| * |
| * Scarlett 6i6 support added in June 2019 (thanks to Martin Wittmann |
| * for providing usbmon output and testing). |
| * |
| * Scarlett 4i4/8i6 Gen 3 support added in May 2020 (thanks to Laurent |
| * Debricon for donating a 4i4 and to Fredrik Unger for providing 8i6 |
| * usbmon output and testing). |
| * |
| * Scarlett 18i8/18i20 Gen 3 support added in June 2020 (thanks to |
| * Darren Jaeckel, Alex Sedlack, and Clovis Lunel for providing usbmon |
| * output, protocol traces and testing). |
| * |
| * Support for loading mixer volume and mux configuration from the |
| * interface during driver initialisation added in May 2021 (thanks to |
| * Vladimir Sadovnikov for figuring out how). |
| * |
| * Support for Solo/2i2 Gen 3 added in May 2021 (thanks to Alexander |
| * Vorona for 2i2 protocol traces). |
| * |
| * Support for phantom power, direct monitoring, speaker switching, |
| * and talkback added in May-June 2021. |
| * |
| * Support for Clarett+ 8Pre added in Aug 2022 by Christian |
| * Colglazier. |
| * |
| * This ALSA mixer gives access to (model-dependent): |
| * - input, output, mixer-matrix muxes |
| * - mixer-matrix gain stages |
| * - gain/volume/mute controls |
| * - level meters |
| * - line/inst level, pad, and air controls |
| * - phantom power, direct monitor, speaker switching, and talkback |
| * controls |
| * - disable/enable MSD mode |
| * - disable/enable standalone mode |
| * |
| * <ditaa> |
| * /--------------\ 18chn 20chn /--------------\ |
| * | Hardware in +--+------\ /-------------+--+ ALSA PCM out | |
| * \--------------/ | | | | \--------------/ |
| * | | | /-----\ | |
| * | | | | | | |
| * | v v v | | |
| * | +---------------+ | | |
| * | \ Matrix Mux / | | |
| * | +-----+-----+ | | |
| * | | | | |
| * | |18chn | | |
| * | | | | |
| * | | 10chn| | |
| * | v | | |
| * | +------------+ | | |
| * | | Mixer | | | |
| * | | Matrix | | | |
| * | | | | | |
| * | | 18x10 Gain | | | |
| * | | stages | | | |
| * | +-----+------+ | | |
| * | | | | |
| * |18chn |10chn | |20chn |
| * | | | | |
| * | +----------/ | |
| * | | | |
| * v v v |
| * =========================== |
| * +---------------+ +--—------------+ |
| * \ Output Mux / \ Capture Mux / |
| * +---+---+---+ +-----+-----+ |
| * | | | |
| * 10chn| | |18chn |
| * | | | |
| * /--------------\ | | | /--------------\ |
| * | S/PDIF, ADAT |<--/ |10chn \-->| ALSA PCM in | |
| * | Hardware out | | \--------------/ |
| * \--------------/ | |
| * v |
| * +-------------+ Software gain per channel. |
| * | Master Gain |<-- 18i20 only: Switch per channel |
| * +------+------+ to select HW or SW gain control. |
| * | |
| * |10chn |
| * /--------------\ | |
| * | Analogue |<------/ |
| * | Hardware out | |
| * \--------------/ |
| * </ditaa> |
| * |
| * Gen 3 devices have a Mass Storage Device (MSD) mode where a small |
| * disk with registration and driver download information is presented |
| * to the host. To access the full functionality of the device without |
| * proprietary software, MSD mode can be disabled by: |
| * - holding down the 48V button for five seconds while powering on |
| * the device, or |
| * - using this driver and alsamixer to change the "MSD Mode" setting |
| * to Off and power-cycling the device |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/moduleparam.h> |
| |
| #include <sound/control.h> |
| #include <sound/tlv.h> |
| |
| #include "usbaudio.h" |
| #include "mixer.h" |
| #include "helper.h" |
| |
| #include "mixer_scarlett_gen2.h" |
| |
| /* device_setup value to enable */ |
| #define SCARLETT2_ENABLE 0x01 |
| |
| /* device_setup value to allow turning MSD mode back on */ |
| #define SCARLETT2_MSD_ENABLE 0x02 |
| |
| /* some gui mixers can't handle negative ctl values */ |
| #define SCARLETT2_VOLUME_BIAS 127 |
| |
| /* mixer range from -80dB to +6dB in 0.5dB steps */ |
| #define SCARLETT2_MIXER_MIN_DB -80 |
| #define SCARLETT2_MIXER_BIAS (-SCARLETT2_MIXER_MIN_DB * 2) |
| #define SCARLETT2_MIXER_MAX_DB 6 |
| #define SCARLETT2_MIXER_MAX_VALUE \ |
| ((SCARLETT2_MIXER_MAX_DB - SCARLETT2_MIXER_MIN_DB) * 2) |
| #define SCARLETT2_MIXER_VALUE_COUNT (SCARLETT2_MIXER_MAX_VALUE + 1) |
| |
| /* map from (dB + 80) * 2 to mixer value |
| * for dB in 0 .. 172: int(8192 * pow(10, ((dB - 160) / 2 / 20))) |
| */ |
| static const u16 scarlett2_mixer_values[SCARLETT2_MIXER_VALUE_COUNT] = { |
| 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, |
| 2, 2, 3, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 6, 6, 6, 7, 7, 8, 8, |
| 9, 9, 10, 10, 11, 12, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, |
| 23, 24, 25, 27, 29, 30, 32, 34, 36, 38, 41, 43, 46, 48, 51, |
| 54, 57, 61, 65, 68, 73, 77, 81, 86, 91, 97, 103, 109, 115, |
| 122, 129, 137, 145, 154, 163, 173, 183, 194, 205, 217, 230, |
| 244, 259, 274, 290, 307, 326, 345, 365, 387, 410, 434, 460, |
| 487, 516, 547, 579, 614, 650, 689, 730, 773, 819, 867, 919, |
| 973, 1031, 1092, 1157, 1225, 1298, 1375, 1456, 1543, 1634, |
| 1731, 1833, 1942, 2057, 2179, 2308, 2445, 2590, 2744, 2906, |
| 3078, 3261, 3454, 3659, 3876, 4105, 4349, 4606, 4879, 5168, |
| 5475, 5799, 6143, 6507, 6892, 7301, 7733, 8192, 8677, 9191, |
| 9736, 10313, 10924, 11571, 12257, 12983, 13752, 14567, 15430, |
| 16345 |
| }; |
| |
| /* Maximum number of analogue outputs */ |
| #define SCARLETT2_ANALOGUE_MAX 10 |
| |
| /* Maximum number of level and pad switches */ |
| #define SCARLETT2_LEVEL_SWITCH_MAX 2 |
| #define SCARLETT2_PAD_SWITCH_MAX 8 |
| #define SCARLETT2_AIR_SWITCH_MAX 8 |
| #define SCARLETT2_PHANTOM_SWITCH_MAX 2 |
| |
| /* Maximum number of inputs to the mixer */ |
| #define SCARLETT2_INPUT_MIX_MAX 25 |
| |
| /* Maximum number of outputs from the mixer */ |
| #define SCARLETT2_OUTPUT_MIX_MAX 12 |
| |
| /* Maximum size of the data in the USB mux assignment message: |
| * 20 inputs, 20 outputs, 25 matrix inputs, 12 spare |
| */ |
| #define SCARLETT2_MUX_MAX 77 |
| |
| /* Maximum number of meters (sum of output port counts) */ |
| #define SCARLETT2_MAX_METERS 65 |
| |
| /* There are three different sets of configuration parameters across |
| * the devices |
| */ |
| enum { |
| SCARLETT2_CONFIG_SET_NO_MIXER = 0, |
| SCARLETT2_CONFIG_SET_GEN_2 = 1, |
| SCARLETT2_CONFIG_SET_GEN_3 = 2, |
| SCARLETT2_CONFIG_SET_CLARETT = 3, |
| SCARLETT2_CONFIG_SET_COUNT = 4 |
| }; |
| |
| /* Hardware port types: |
| * - None (no input to mux) |
| * - Analogue I/O |
| * - S/PDIF I/O |
| * - ADAT I/O |
| * - Mixer I/O |
| * - PCM I/O |
| */ |
| enum { |
| SCARLETT2_PORT_TYPE_NONE = 0, |
| SCARLETT2_PORT_TYPE_ANALOGUE = 1, |
| SCARLETT2_PORT_TYPE_SPDIF = 2, |
| SCARLETT2_PORT_TYPE_ADAT = 3, |
| SCARLETT2_PORT_TYPE_MIX = 4, |
| SCARLETT2_PORT_TYPE_PCM = 5, |
| SCARLETT2_PORT_TYPE_COUNT = 6, |
| }; |
| |
| /* I/O count of each port type kept in struct scarlett2_ports */ |
| enum { |
| SCARLETT2_PORT_IN = 0, |
| SCARLETT2_PORT_OUT = 1, |
| SCARLETT2_PORT_DIRNS = 2, |
| }; |
| |
| /* Dim/Mute buttons on the 18i20 */ |
| enum { |
| SCARLETT2_BUTTON_MUTE = 0, |
| SCARLETT2_BUTTON_DIM = 1, |
| SCARLETT2_DIM_MUTE_COUNT = 2, |
| }; |
| |
| static const char *const scarlett2_dim_mute_names[SCARLETT2_DIM_MUTE_COUNT] = { |
| "Mute Playback Switch", "Dim Playback Switch" |
| }; |
| |
| /* Description of each hardware port type: |
| * - id: hardware ID of this port type |
| * - src_descr: printf format string for mux input selections |
| * - src_num_offset: added to channel number for the fprintf |
| * - dst_descr: printf format string for mixer controls |
| */ |
| struct scarlett2_port { |
| u16 id; |
| const char * const src_descr; |
| int src_num_offset; |
| const char * const dst_descr; |
| }; |
| |
| static const struct scarlett2_port scarlett2_ports[SCARLETT2_PORT_TYPE_COUNT] = { |
| [SCARLETT2_PORT_TYPE_NONE] = { |
| .id = 0x000, |
| .src_descr = "Off" |
| }, |
| [SCARLETT2_PORT_TYPE_ANALOGUE] = { |
| .id = 0x080, |
| .src_descr = "Analogue %d", |
| .src_num_offset = 1, |
| .dst_descr = "Analogue Output %02d Playback" |
| }, |
| [SCARLETT2_PORT_TYPE_SPDIF] = { |
| .id = 0x180, |
| .src_descr = "S/PDIF %d", |
| .src_num_offset = 1, |
| .dst_descr = "S/PDIF Output %d Playback" |
| }, |
| [SCARLETT2_PORT_TYPE_ADAT] = { |
| .id = 0x200, |
| .src_descr = "ADAT %d", |
| .src_num_offset = 1, |
| .dst_descr = "ADAT Output %d Playback" |
| }, |
| [SCARLETT2_PORT_TYPE_MIX] = { |
| .id = 0x300, |
| .src_descr = "Mix %c", |
| .src_num_offset = 'A', |
| .dst_descr = "Mixer Input %02d Capture" |
| }, |
| [SCARLETT2_PORT_TYPE_PCM] = { |
| .id = 0x600, |
| .src_descr = "PCM %d", |
| .src_num_offset = 1, |
| .dst_descr = "PCM %02d Capture" |
| }, |
| }; |
| |
| /* Number of mux tables: one for each band of sample rates |
| * (44.1/48kHz, 88.2/96kHz, and 176.4/176kHz) |
| */ |
| #define SCARLETT2_MUX_TABLES 3 |
| |
| /* Maximum number of entries in a mux table */ |
| #define SCARLETT2_MAX_MUX_ENTRIES 10 |
| |
| /* One entry within mux_assignment defines the port type and range of |
| * ports to add to the set_mux message. The end of the list is marked |
| * with count == 0. |
| */ |
| struct scarlett2_mux_entry { |
| u8 port_type; |
| u8 start; |
| u8 count; |
| }; |
| |
| struct scarlett2_device_info { |
| u32 usb_id; /* USB device identifier */ |
| |
| /* Gen 3 devices have an internal MSD mode switch that needs |
| * to be disabled in order to access the full functionality of |
| * the device. |
| */ |
| u8 has_msd_mode; |
| |
| /* which set of configuration parameters the device uses */ |
| u8 config_set; |
| |
| /* line out hw volume is sw controlled */ |
| u8 line_out_hw_vol; |
| |
| /* support for main/alt speaker switching */ |
| u8 has_speaker_switching; |
| |
| /* support for talkback microphone */ |
| u8 has_talkback; |
| |
| /* the number of analogue inputs with a software switchable |
| * level control that can be set to line or instrument |
| */ |
| u8 level_input_count; |
| |
| /* the first input with a level control (0-based) */ |
| u8 level_input_first; |
| |
| /* the number of analogue inputs with a software switchable |
| * 10dB pad control |
| */ |
| u8 pad_input_count; |
| |
| /* the number of analogue inputs with a software switchable |
| * "air" control |
| */ |
| u8 air_input_count; |
| |
| /* the number of phantom (48V) software switchable controls */ |
| u8 phantom_count; |
| |
| /* the number of inputs each phantom switch controls */ |
| u8 inputs_per_phantom; |
| |
| /* the number of direct monitor options |
| * (0 = none, 1 = mono only, 2 = mono/stereo) |
| */ |
| u8 direct_monitor; |
| |
| /* remap analogue outputs; 18i8 Gen 3 has "line 3/4" connected |
| * internally to the analogue 7/8 outputs |
| */ |
| u8 line_out_remap_enable; |
| u8 line_out_remap[SCARLETT2_ANALOGUE_MAX]; |
| |
| /* additional description for the line out volume controls */ |
| const char * const line_out_descrs[SCARLETT2_ANALOGUE_MAX]; |
| |
| /* number of sources/destinations of each port type */ |
| const int port_count[SCARLETT2_PORT_TYPE_COUNT][SCARLETT2_PORT_DIRNS]; |
| |
| /* layout/order of the entries in the set_mux message */ |
| struct scarlett2_mux_entry mux_assignment[SCARLETT2_MUX_TABLES] |
| [SCARLETT2_MAX_MUX_ENTRIES]; |
| }; |
| |
| struct scarlett2_data { |
| struct usb_mixer_interface *mixer; |
| struct mutex usb_mutex; /* prevent sending concurrent USB requests */ |
| struct mutex data_mutex; /* lock access to this data */ |
| struct delayed_work work; |
| const struct scarlett2_device_info *info; |
| __u8 bInterfaceNumber; |
| __u8 bEndpointAddress; |
| __u16 wMaxPacketSize; |
| __u8 bInterval; |
| int num_mux_srcs; |
| int num_mux_dsts; |
| u16 scarlett2_seq; |
| u8 sync_updated; |
| u8 vol_updated; |
| u8 input_other_updated; |
| u8 monitor_other_updated; |
| u8 mux_updated; |
| u8 speaker_switching_switched; |
| u8 sync; |
| u8 master_vol; |
| u8 vol[SCARLETT2_ANALOGUE_MAX]; |
| u8 vol_sw_hw_switch[SCARLETT2_ANALOGUE_MAX]; |
| u8 mute_switch[SCARLETT2_ANALOGUE_MAX]; |
| u8 level_switch[SCARLETT2_LEVEL_SWITCH_MAX]; |
| u8 pad_switch[SCARLETT2_PAD_SWITCH_MAX]; |
| u8 dim_mute[SCARLETT2_DIM_MUTE_COUNT]; |
| u8 air_switch[SCARLETT2_AIR_SWITCH_MAX]; |
| u8 phantom_switch[SCARLETT2_PHANTOM_SWITCH_MAX]; |
| u8 phantom_persistence; |
| u8 direct_monitor_switch; |
| u8 speaker_switching_switch; |
| u8 talkback_switch; |
| u8 talkback_map[SCARLETT2_OUTPUT_MIX_MAX]; |
| u8 msd_switch; |
| u8 standalone_switch; |
| struct snd_kcontrol *sync_ctl; |
| struct snd_kcontrol *master_vol_ctl; |
| struct snd_kcontrol *vol_ctls[SCARLETT2_ANALOGUE_MAX]; |
| struct snd_kcontrol *sw_hw_ctls[SCARLETT2_ANALOGUE_MAX]; |
| struct snd_kcontrol *mute_ctls[SCARLETT2_ANALOGUE_MAX]; |
| struct snd_kcontrol *dim_mute_ctls[SCARLETT2_DIM_MUTE_COUNT]; |
| struct snd_kcontrol *level_ctls[SCARLETT2_LEVEL_SWITCH_MAX]; |
| struct snd_kcontrol *pad_ctls[SCARLETT2_PAD_SWITCH_MAX]; |
| struct snd_kcontrol *air_ctls[SCARLETT2_AIR_SWITCH_MAX]; |
| struct snd_kcontrol *phantom_ctls[SCARLETT2_PHANTOM_SWITCH_MAX]; |
| struct snd_kcontrol *mux_ctls[SCARLETT2_MUX_MAX]; |
| struct snd_kcontrol *direct_monitor_ctl; |
| struct snd_kcontrol *speaker_switching_ctl; |
| struct snd_kcontrol *talkback_ctl; |
| u8 mux[SCARLETT2_MUX_MAX]; |
| u8 mix[SCARLETT2_INPUT_MIX_MAX * SCARLETT2_OUTPUT_MIX_MAX]; |
| }; |
| |
| /*** Model-specific data ***/ |
| |
| static const struct scarlett2_device_info s6i6_gen2_info = { |
| .usb_id = USB_ID(0x1235, 0x8203), |
| |
| .config_set = SCARLETT2_CONFIG_SET_GEN_2, |
| .level_input_count = 2, |
| .pad_input_count = 2, |
| |
| .line_out_descrs = { |
| "Headphones 1 L", |
| "Headphones 1 R", |
| "Headphones 2 L", |
| "Headphones 2 R", |
| }, |
| |
| .port_count = { |
| [SCARLETT2_PORT_TYPE_NONE] = { 1, 0 }, |
| [SCARLETT2_PORT_TYPE_ANALOGUE] = { 4, 4 }, |
| [SCARLETT2_PORT_TYPE_SPDIF] = { 2, 2 }, |
| [SCARLETT2_PORT_TYPE_MIX] = { 10, 18 }, |
| [SCARLETT2_PORT_TYPE_PCM] = { 6, 6 }, |
| }, |
| |
| .mux_assignment = { { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 6 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 8 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 6 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 8 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 6 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 8 }, |
| { 0, 0, 0 }, |
| } }, |
| }; |
| |
| static const struct scarlett2_device_info s18i8_gen2_info = { |
| .usb_id = USB_ID(0x1235, 0x8204), |
| |
| .config_set = SCARLETT2_CONFIG_SET_GEN_2, |
| .level_input_count = 2, |
| .pad_input_count = 4, |
| |
| .line_out_descrs = { |
| "Monitor L", |
| "Monitor R", |
| "Headphones 1 L", |
| "Headphones 1 R", |
| "Headphones 2 L", |
| "Headphones 2 R", |
| }, |
| |
| .port_count = { |
| [SCARLETT2_PORT_TYPE_NONE] = { 1, 0 }, |
| [SCARLETT2_PORT_TYPE_ANALOGUE] = { 8, 6 }, |
| [SCARLETT2_PORT_TYPE_SPDIF] = { 2, 2 }, |
| [SCARLETT2_PORT_TYPE_ADAT] = { 8, 0 }, |
| [SCARLETT2_PORT_TYPE_MIX] = { 10, 18 }, |
| [SCARLETT2_PORT_TYPE_PCM] = { 8, 18 }, |
| }, |
| |
| .mux_assignment = { { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 6 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 8 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 14 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 6 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 8 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 6 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 4 }, |
| { 0, 0, 0 }, |
| } }, |
| }; |
| |
| static const struct scarlett2_device_info s18i20_gen2_info = { |
| .usb_id = USB_ID(0x1235, 0x8201), |
| |
| .config_set = SCARLETT2_CONFIG_SET_GEN_2, |
| .line_out_hw_vol = 1, |
| |
| .line_out_descrs = { |
| "Monitor L", |
| "Monitor R", |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| "Headphones 1 L", |
| "Headphones 1 R", |
| "Headphones 2 L", |
| "Headphones 2 R", |
| }, |
| |
| .port_count = { |
| [SCARLETT2_PORT_TYPE_NONE] = { 1, 0 }, |
| [SCARLETT2_PORT_TYPE_ANALOGUE] = { 8, 10 }, |
| [SCARLETT2_PORT_TYPE_SPDIF] = { 2, 2 }, |
| [SCARLETT2_PORT_TYPE_ADAT] = { 8, 8 }, |
| [SCARLETT2_PORT_TYPE_MIX] = { 10, 18 }, |
| [SCARLETT2_PORT_TYPE_PCM] = { 20, 18 }, |
| }, |
| |
| .mux_assignment = { { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_ADAT, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 8 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 14 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_ADAT, 0, 4 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 8 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 6 }, |
| { 0, 0, 0 }, |
| } }, |
| }; |
| |
| static const struct scarlett2_device_info solo_gen3_info = { |
| .usb_id = USB_ID(0x1235, 0x8211), |
| |
| .has_msd_mode = 1, |
| .config_set = SCARLETT2_CONFIG_SET_NO_MIXER, |
| .level_input_count = 1, |
| .level_input_first = 1, |
| .air_input_count = 1, |
| .phantom_count = 1, |
| .inputs_per_phantom = 1, |
| .direct_monitor = 1, |
| }; |
| |
| static const struct scarlett2_device_info s2i2_gen3_info = { |
| .usb_id = USB_ID(0x1235, 0x8210), |
| |
| .has_msd_mode = 1, |
| .config_set = SCARLETT2_CONFIG_SET_NO_MIXER, |
| .level_input_count = 2, |
| .air_input_count = 2, |
| .phantom_count = 1, |
| .inputs_per_phantom = 2, |
| .direct_monitor = 2, |
| }; |
| |
| static const struct scarlett2_device_info s4i4_gen3_info = { |
| .usb_id = USB_ID(0x1235, 0x8212), |
| |
| .has_msd_mode = 1, |
| .config_set = SCARLETT2_CONFIG_SET_GEN_3, |
| .level_input_count = 2, |
| .pad_input_count = 2, |
| .air_input_count = 2, |
| .phantom_count = 1, |
| .inputs_per_phantom = 2, |
| |
| .line_out_descrs = { |
| "Monitor L", |
| "Monitor R", |
| "Headphones L", |
| "Headphones R", |
| }, |
| |
| .port_count = { |
| [SCARLETT2_PORT_TYPE_NONE] = { 1, 0 }, |
| [SCARLETT2_PORT_TYPE_ANALOGUE] = { 4, 4 }, |
| [SCARLETT2_PORT_TYPE_MIX] = { 6, 8 }, |
| [SCARLETT2_PORT_TYPE_PCM] = { 4, 6 }, |
| }, |
| |
| .mux_assignment = { { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 6 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 16 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 6 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 16 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 6 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 16 }, |
| { 0, 0, 0 }, |
| } }, |
| }; |
| |
| static const struct scarlett2_device_info s8i6_gen3_info = { |
| .usb_id = USB_ID(0x1235, 0x8213), |
| |
| .has_msd_mode = 1, |
| .config_set = SCARLETT2_CONFIG_SET_GEN_3, |
| .level_input_count = 2, |
| .pad_input_count = 2, |
| .air_input_count = 2, |
| .phantom_count = 1, |
| .inputs_per_phantom = 2, |
| |
| .line_out_descrs = { |
| "Headphones 1 L", |
| "Headphones 1 R", |
| "Headphones 2 L", |
| "Headphones 2 R", |
| }, |
| |
| .port_count = { |
| [SCARLETT2_PORT_TYPE_NONE] = { 1, 0 }, |
| [SCARLETT2_PORT_TYPE_ANALOGUE] = { 6, 4 }, |
| [SCARLETT2_PORT_TYPE_SPDIF] = { 2, 2 }, |
| [SCARLETT2_PORT_TYPE_MIX] = { 8, 8 }, |
| [SCARLETT2_PORT_TYPE_PCM] = { 6, 10 }, |
| }, |
| |
| .mux_assignment = { { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_PCM, 8, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 18 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_PCM, 8, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 18 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 4 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_PCM, 8, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 18 }, |
| { 0, 0, 0 }, |
| } }, |
| }; |
| |
| static const struct scarlett2_device_info s18i8_gen3_info = { |
| .usb_id = USB_ID(0x1235, 0x8214), |
| |
| .has_msd_mode = 1, |
| .config_set = SCARLETT2_CONFIG_SET_GEN_3, |
| .line_out_hw_vol = 1, |
| .has_speaker_switching = 1, |
| .level_input_count = 2, |
| .pad_input_count = 4, |
| .air_input_count = 4, |
| .phantom_count = 2, |
| .inputs_per_phantom = 2, |
| |
| .line_out_remap_enable = 1, |
| .line_out_remap = { 0, 1, 6, 7, 2, 3, 4, 5 }, |
| |
| .line_out_descrs = { |
| "Monitor L", |
| "Monitor R", |
| "Alt Monitor L", |
| "Alt Monitor R", |
| "Headphones 1 L", |
| "Headphones 1 R", |
| "Headphones 2 L", |
| "Headphones 2 R", |
| }, |
| |
| .port_count = { |
| [SCARLETT2_PORT_TYPE_NONE] = { 1, 0 }, |
| [SCARLETT2_PORT_TYPE_ANALOGUE] = { 8, 8 }, |
| [SCARLETT2_PORT_TYPE_SPDIF] = { 2, 2 }, |
| [SCARLETT2_PORT_TYPE_ADAT] = { 8, 0 }, |
| [SCARLETT2_PORT_TYPE_MIX] = { 10, 20 }, |
| [SCARLETT2_PORT_TYPE_PCM] = { 8, 20 }, |
| }, |
| |
| .mux_assignment = { { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_PCM, 12, 8 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 6, 2 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 2, 4 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_PCM, 10, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 20 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 10 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_PCM, 12, 4 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 6, 2 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 2, 4 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_PCM, 10, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 20 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 10 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 6, 2 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 2, 4 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 20 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 10 }, |
| { 0, 0, 0 }, |
| } }, |
| }; |
| |
| static const struct scarlett2_device_info s18i20_gen3_info = { |
| .usb_id = USB_ID(0x1235, 0x8215), |
| |
| .has_msd_mode = 1, |
| .config_set = SCARLETT2_CONFIG_SET_GEN_3, |
| .line_out_hw_vol = 1, |
| .has_speaker_switching = 1, |
| .has_talkback = 1, |
| .level_input_count = 2, |
| .pad_input_count = 8, |
| .air_input_count = 8, |
| .phantom_count = 2, |
| .inputs_per_phantom = 4, |
| |
| .line_out_descrs = { |
| "Monitor 1 L", |
| "Monitor 1 R", |
| "Monitor 2 L", |
| "Monitor 2 R", |
| NULL, |
| NULL, |
| "Headphones 1 L", |
| "Headphones 1 R", |
| "Headphones 2 L", |
| "Headphones 2 R", |
| }, |
| |
| .port_count = { |
| [SCARLETT2_PORT_TYPE_NONE] = { 1, 0 }, |
| [SCARLETT2_PORT_TYPE_ANALOGUE] = { 9, 10 }, |
| [SCARLETT2_PORT_TYPE_SPDIF] = { 2, 2 }, |
| [SCARLETT2_PORT_TYPE_ADAT] = { 8, 8 }, |
| [SCARLETT2_PORT_TYPE_MIX] = { 12, 25 }, |
| [SCARLETT2_PORT_TYPE_PCM] = { 20, 20 }, |
| }, |
| |
| .mux_assignment = { { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_PCM, 10, 10 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_ADAT, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_PCM, 8, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 25 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 12 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_PCM, 10, 8 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_ADAT, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_PCM, 8, 2 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 25 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 10 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 24 }, |
| { 0, 0, 0 }, |
| } }, |
| }; |
| |
| static const struct scarlett2_device_info clarett_8pre_info = { |
| .usb_id = USB_ID(0x1235, 0x820c), |
| |
| .config_set = SCARLETT2_CONFIG_SET_CLARETT, |
| .line_out_hw_vol = 1, |
| .level_input_count = 2, |
| .air_input_count = 8, |
| |
| .line_out_descrs = { |
| "Monitor L", |
| "Monitor R", |
| NULL, |
| NULL, |
| NULL, |
| NULL, |
| "Headphones 1 L", |
| "Headphones 1 R", |
| "Headphones 2 L", |
| "Headphones 2 R", |
| }, |
| |
| .port_count = { |
| [SCARLETT2_PORT_TYPE_NONE] = { 1, 0 }, |
| [SCARLETT2_PORT_TYPE_ANALOGUE] = { 8, 10 }, |
| [SCARLETT2_PORT_TYPE_SPDIF] = { 2, 2 }, |
| [SCARLETT2_PORT_TYPE_ADAT] = { 8, 8 }, |
| [SCARLETT2_PORT_TYPE_MIX] = { 10, 18 }, |
| [SCARLETT2_PORT_TYPE_PCM] = { 20, 18 }, |
| }, |
| |
| .mux_assignment = { { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_ADAT, 0, 8 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 8 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 14 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_ADAT, 0, 4 }, |
| { SCARLETT2_PORT_TYPE_MIX, 0, 18 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 8 }, |
| { 0, 0, 0 }, |
| }, { |
| { SCARLETT2_PORT_TYPE_PCM, 0, 12 }, |
| { SCARLETT2_PORT_TYPE_ANALOGUE, 0, 10 }, |
| { SCARLETT2_PORT_TYPE_SPDIF, 0, 2 }, |
| { SCARLETT2_PORT_TYPE_NONE, 0, 22 }, |
| { 0, 0, 0 }, |
| } }, |
| }; |
| |
| static const struct scarlett2_device_info *scarlett2_devices[] = { |
| /* Supported Gen 2 devices */ |
| &s6i6_gen2_info, |
| &s18i8_gen2_info, |
| &s18i20_gen2_info, |
| |
| /* Supported Gen 3 devices */ |
| &solo_gen3_info, |
| &s2i2_gen3_info, |
| &s4i4_gen3_info, |
| &s8i6_gen3_info, |
| &s18i8_gen3_info, |
| &s18i20_gen3_info, |
| |
| /* Supported Clarett+ devices */ |
| &clarett_8pre_info, |
| |
| /* End of list */ |
| NULL |
| }; |
| |
| /* get the starting port index number for a given port type/direction */ |
| static int scarlett2_get_port_start_num( |
| const int port_count[][SCARLETT2_PORT_DIRNS], |
| int direction, int port_type) |
| { |
| int i, num = 0; |
| |
| for (i = 0; i < port_type; i++) |
| num += port_count[i][direction]; |
| |
| return num; |
| } |
| |
| /*** USB Interactions ***/ |
| |
| /* Notifications from the interface */ |
| #define SCARLETT2_USB_NOTIFY_SYNC 0x00000008 |
| #define SCARLETT2_USB_NOTIFY_DIM_MUTE 0x00200000 |
| #define SCARLETT2_USB_NOTIFY_MONITOR 0x00400000 |
| #define SCARLETT2_USB_NOTIFY_INPUT_OTHER 0x00800000 |
| #define SCARLETT2_USB_NOTIFY_MONITOR_OTHER 0x01000000 |
| |
| /* Commands for sending/receiving requests/responses */ |
| #define SCARLETT2_USB_CMD_INIT 0 |
| #define SCARLETT2_USB_CMD_REQ 2 |
| #define SCARLETT2_USB_CMD_RESP 3 |
| |
| #define SCARLETT2_USB_INIT_1 0x00000000 |
| #define SCARLETT2_USB_INIT_2 0x00000002 |
| #define SCARLETT2_USB_GET_METER 0x00001001 |
| #define SCARLETT2_USB_GET_MIX 0x00002001 |
| #define SCARLETT2_USB_SET_MIX 0x00002002 |
| #define SCARLETT2_USB_GET_MUX 0x00003001 |
| #define SCARLETT2_USB_SET_MUX 0x00003002 |
| #define SCARLETT2_USB_GET_SYNC 0x00006004 |
| #define SCARLETT2_USB_GET_DATA 0x00800000 |
| #define SCARLETT2_USB_SET_DATA 0x00800001 |
| #define SCARLETT2_USB_DATA_CMD 0x00800002 |
| |
| #define SCARLETT2_USB_CONFIG_SAVE 6 |
| |
| #define SCARLETT2_USB_VOLUME_STATUS_OFFSET 0x31 |
| #define SCARLETT2_USB_METER_LEVELS_GET_MAGIC 1 |
| |
| /* volume status is read together (matches scarlett2_config_items[1]) */ |
| struct scarlett2_usb_volume_status { |
| /* dim/mute buttons */ |
| u8 dim_mute[SCARLETT2_DIM_MUTE_COUNT]; |
| |
| u8 pad1; |
| |
| /* software volume setting */ |
| s16 sw_vol[SCARLETT2_ANALOGUE_MAX]; |
| |
| /* actual volume of output inc. dim (-18dB) */ |
| s16 hw_vol[SCARLETT2_ANALOGUE_MAX]; |
| |
| /* internal mute buttons */ |
| u8 mute_switch[SCARLETT2_ANALOGUE_MAX]; |
| |
| /* sw (0) or hw (1) controlled */ |
| u8 sw_hw_switch[SCARLETT2_ANALOGUE_MAX]; |
| |
| u8 pad3[6]; |
| |
| /* front panel volume knob */ |
| s16 master_vol; |
| } __packed; |
| |
| /* Configuration parameters that can be read and written */ |
| enum { |
| SCARLETT2_CONFIG_DIM_MUTE = 0, |
| SCARLETT2_CONFIG_LINE_OUT_VOLUME = 1, |
| SCARLETT2_CONFIG_MUTE_SWITCH = 2, |
| SCARLETT2_CONFIG_SW_HW_SWITCH = 3, |
| SCARLETT2_CONFIG_LEVEL_SWITCH = 4, |
| SCARLETT2_CONFIG_PAD_SWITCH = 5, |
| SCARLETT2_CONFIG_MSD_SWITCH = 6, |
| SCARLETT2_CONFIG_AIR_SWITCH = 7, |
| SCARLETT2_CONFIG_STANDALONE_SWITCH = 8, |
| SCARLETT2_CONFIG_PHANTOM_SWITCH = 9, |
| SCARLETT2_CONFIG_PHANTOM_PERSISTENCE = 10, |
| SCARLETT2_CONFIG_DIRECT_MONITOR = 11, |
| SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH = 12, |
| SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE = 13, |
| SCARLETT2_CONFIG_TALKBACK_MAP = 14, |
| SCARLETT2_CONFIG_COUNT = 15 |
| }; |
| |
| /* Location, size, and activation command number for the configuration |
| * parameters. Size is in bits and may be 1, 8, or 16. |
| */ |
| struct scarlett2_config { |
| u8 offset; |
| u8 size; |
| u8 activate; |
| }; |
| |
| static const struct scarlett2_config |
| scarlett2_config_items[SCARLETT2_CONFIG_SET_COUNT] |
| [SCARLETT2_CONFIG_COUNT] = |
| |
| /* Devices without a mixer (Gen 3 Solo and 2i2) */ |
| { { |
| [SCARLETT2_CONFIG_MSD_SWITCH] = { |
| .offset = 0x04, .size = 8, .activate = 6 }, |
| |
| [SCARLETT2_CONFIG_PHANTOM_PERSISTENCE] = { |
| .offset = 0x05, .size = 8, .activate = 6 }, |
| |
| [SCARLETT2_CONFIG_PHANTOM_SWITCH] = { |
| .offset = 0x06, .size = 8, .activate = 3 }, |
| |
| [SCARLETT2_CONFIG_DIRECT_MONITOR] = { |
| .offset = 0x07, .size = 8, .activate = 4 }, |
| |
| [SCARLETT2_CONFIG_LEVEL_SWITCH] = { |
| .offset = 0x08, .size = 1, .activate = 7 }, |
| |
| [SCARLETT2_CONFIG_AIR_SWITCH] = { |
| .offset = 0x09, .size = 1, .activate = 8 }, |
| |
| /* Gen 2 devices: 6i6, 18i8, 18i20 */ |
| }, { |
| [SCARLETT2_CONFIG_DIM_MUTE] = { |
| .offset = 0x31, .size = 8, .activate = 2 }, |
| |
| [SCARLETT2_CONFIG_LINE_OUT_VOLUME] = { |
| .offset = 0x34, .size = 16, .activate = 1 }, |
| |
| [SCARLETT2_CONFIG_MUTE_SWITCH] = { |
| .offset = 0x5c, .size = 8, .activate = 1 }, |
| |
| [SCARLETT2_CONFIG_SW_HW_SWITCH] = { |
| .offset = 0x66, .size = 8, .activate = 3 }, |
| |
| [SCARLETT2_CONFIG_LEVEL_SWITCH] = { |
| .offset = 0x7c, .size = 8, .activate = 7 }, |
| |
| [SCARLETT2_CONFIG_PAD_SWITCH] = { |
| .offset = 0x84, .size = 8, .activate = 8 }, |
| |
| [SCARLETT2_CONFIG_STANDALONE_SWITCH] = { |
| .offset = 0x8d, .size = 8, .activate = 6 }, |
| |
| /* Gen 3 devices: 4i4, 8i6, 18i8, 18i20 */ |
| }, { |
| [SCARLETT2_CONFIG_DIM_MUTE] = { |
| .offset = 0x31, .size = 8, .activate = 2 }, |
| |
| [SCARLETT2_CONFIG_LINE_OUT_VOLUME] = { |
| .offset = 0x34, .size = 16, .activate = 1 }, |
| |
| [SCARLETT2_CONFIG_MUTE_SWITCH] = { |
| .offset = 0x5c, .size = 8, .activate = 1 }, |
| |
| [SCARLETT2_CONFIG_SW_HW_SWITCH] = { |
| .offset = 0x66, .size = 8, .activate = 3 }, |
| |
| [SCARLETT2_CONFIG_LEVEL_SWITCH] = { |
| .offset = 0x7c, .size = 8, .activate = 7 }, |
| |
| [SCARLETT2_CONFIG_PAD_SWITCH] = { |
| .offset = 0x84, .size = 8, .activate = 8 }, |
| |
| [SCARLETT2_CONFIG_AIR_SWITCH] = { |
| .offset = 0x8c, .size = 8, .activate = 8 }, |
| |
| [SCARLETT2_CONFIG_STANDALONE_SWITCH] = { |
| .offset = 0x95, .size = 8, .activate = 6 }, |
| |
| [SCARLETT2_CONFIG_PHANTOM_SWITCH] = { |
| .offset = 0x9c, .size = 1, .activate = 8 }, |
| |
| [SCARLETT2_CONFIG_MSD_SWITCH] = { |
| .offset = 0x9d, .size = 8, .activate = 6 }, |
| |
| [SCARLETT2_CONFIG_PHANTOM_PERSISTENCE] = { |
| .offset = 0x9e, .size = 8, .activate = 6 }, |
| |
| [SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH] = { |
| .offset = 0x9f, .size = 1, .activate = 10 }, |
| |
| [SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE] = { |
| .offset = 0xa0, .size = 1, .activate = 10 }, |
| |
| [SCARLETT2_CONFIG_TALKBACK_MAP] = { |
| .offset = 0xb0, .size = 16, .activate = 10 }, |
| |
| /* Clarett+ 8Pre */ |
| }, { |
| [SCARLETT2_CONFIG_DIM_MUTE] = { |
| .offset = 0x31, .size = 8, .activate = 2 }, |
| |
| [SCARLETT2_CONFIG_LINE_OUT_VOLUME] = { |
| .offset = 0x34, .size = 16, .activate = 1 }, |
| |
| [SCARLETT2_CONFIG_MUTE_SWITCH] = { |
| .offset = 0x5c, .size = 8, .activate = 1 }, |
| |
| [SCARLETT2_CONFIG_SW_HW_SWITCH] = { |
| .offset = 0x66, .size = 8, .activate = 3 }, |
| |
| [SCARLETT2_CONFIG_LEVEL_SWITCH] = { |
| .offset = 0x7c, .size = 8, .activate = 7 }, |
| |
| [SCARLETT2_CONFIG_AIR_SWITCH] = { |
| .offset = 0x95, .size = 8, .activate = 8 }, |
| |
| [SCARLETT2_CONFIG_STANDALONE_SWITCH] = { |
| .offset = 0x8d, .size = 8, .activate = 6 }, |
| } }; |
| |
| /* proprietary request/response format */ |
| struct scarlett2_usb_packet { |
| __le32 cmd; |
| __le16 size; |
| __le16 seq; |
| __le32 error; |
| __le32 pad; |
| u8 data[]; |
| }; |
| |
| static void scarlett2_fill_request_header(struct scarlett2_data *private, |
| struct scarlett2_usb_packet *req, |
| u32 cmd, u16 req_size) |
| { |
| /* sequence must go up by 1 for each request */ |
| u16 seq = private->scarlett2_seq++; |
| |
| req->cmd = cpu_to_le32(cmd); |
| req->size = cpu_to_le16(req_size); |
| req->seq = cpu_to_le16(seq); |
| req->error = 0; |
| req->pad = 0; |
| } |
| |
| static int scarlett2_usb_tx(struct usb_device *dev, int interface, |
| void *buf, u16 size) |
| { |
| return snd_usb_ctl_msg(dev, usb_sndctrlpipe(dev, 0), |
| SCARLETT2_USB_CMD_REQ, |
| USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, |
| 0, interface, buf, size); |
| } |
| |
| static int scarlett2_usb_rx(struct usb_device *dev, int interface, |
| u32 usb_req, void *buf, u16 size) |
| { |
| return snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), |
| usb_req, |
| USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, |
| 0, interface, buf, size); |
| } |
| |
| /* Send a proprietary format request to the Scarlett interface */ |
| static int scarlett2_usb( |
| struct usb_mixer_interface *mixer, u32 cmd, |
| void *req_data, u16 req_size, void *resp_data, u16 resp_size) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| struct usb_device *dev = mixer->chip->dev; |
| struct scarlett2_usb_packet *req, *resp = NULL; |
| size_t req_buf_size = struct_size(req, data, req_size); |
| size_t resp_buf_size = struct_size(resp, data, resp_size); |
| int err; |
| |
| req = kmalloc(req_buf_size, GFP_KERNEL); |
| if (!req) { |
| err = -ENOMEM; |
| goto error; |
| } |
| |
| resp = kmalloc(resp_buf_size, GFP_KERNEL); |
| if (!resp) { |
| err = -ENOMEM; |
| goto error; |
| } |
| |
| mutex_lock(&private->usb_mutex); |
| |
| /* build request message and send it */ |
| |
| scarlett2_fill_request_header(private, req, cmd, req_size); |
| |
| if (req_size) |
| memcpy(req->data, req_data, req_size); |
| |
| err = scarlett2_usb_tx(dev, private->bInterfaceNumber, |
| req, req_buf_size); |
| |
| if (err != req_buf_size) { |
| usb_audio_err( |
| mixer->chip, |
| "Scarlett Gen 2/3 USB request result cmd %x was %d\n", |
| cmd, err); |
| err = -EINVAL; |
| goto unlock; |
| } |
| |
| /* send a second message to get the response */ |
| |
| err = scarlett2_usb_rx(dev, private->bInterfaceNumber, |
| SCARLETT2_USB_CMD_RESP, |
| resp, resp_buf_size); |
| |
| /* validate the response */ |
| |
| if (err != resp_buf_size) { |
| usb_audio_err( |
| mixer->chip, |
| "Scarlett Gen 2/3 USB response result cmd %x was %d " |
| "expected %zu\n", |
| cmd, err, resp_buf_size); |
| err = -EINVAL; |
| goto unlock; |
| } |
| |
| /* cmd/seq/size should match except when initialising |
| * seq sent = 1, response = 0 |
| */ |
| if (resp->cmd != req->cmd || |
| (resp->seq != req->seq && |
| (le16_to_cpu(req->seq) != 1 || resp->seq != 0)) || |
| resp_size != le16_to_cpu(resp->size) || |
| resp->error || |
| resp->pad) { |
| usb_audio_err( |
| mixer->chip, |
| "Scarlett Gen 2/3 USB invalid response; " |
| "cmd tx/rx %d/%d seq %d/%d size %d/%d " |
| "error %d pad %d\n", |
| le32_to_cpu(req->cmd), le32_to_cpu(resp->cmd), |
| le16_to_cpu(req->seq), le16_to_cpu(resp->seq), |
| resp_size, le16_to_cpu(resp->size), |
| le32_to_cpu(resp->error), |
| le32_to_cpu(resp->pad)); |
| err = -EINVAL; |
| goto unlock; |
| } |
| |
| if (resp_data && resp_size > 0) |
| memcpy(resp_data, resp->data, resp_size); |
| |
| unlock: |
| mutex_unlock(&private->usb_mutex); |
| error: |
| kfree(req); |
| kfree(resp); |
| return err; |
| } |
| |
| /* Send a USB message to get data; result placed in *buf */ |
| static int scarlett2_usb_get( |
| struct usb_mixer_interface *mixer, |
| int offset, void *buf, int size) |
| { |
| struct { |
| __le32 offset; |
| __le32 size; |
| } __packed req; |
| |
| req.offset = cpu_to_le32(offset); |
| req.size = cpu_to_le32(size); |
| return scarlett2_usb(mixer, SCARLETT2_USB_GET_DATA, |
| &req, sizeof(req), buf, size); |
| } |
| |
| /* Send a USB message to get configuration parameters; result placed in *buf */ |
| static int scarlett2_usb_get_config( |
| struct usb_mixer_interface *mixer, |
| int config_item_num, int count, void *buf) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| const struct scarlett2_config *config_item = |
| &scarlett2_config_items[info->config_set][config_item_num]; |
| int size, err, i; |
| u8 *buf_8; |
| u8 value; |
| |
| /* For byte-sized parameters, retrieve directly into buf */ |
| if (config_item->size >= 8) { |
| size = config_item->size / 8 * count; |
| err = scarlett2_usb_get(mixer, config_item->offset, buf, size); |
| if (err < 0) |
| return err; |
| if (size == 2) { |
| u16 *buf_16 = buf; |
| |
| for (i = 0; i < count; i++, buf_16++) |
| *buf_16 = le16_to_cpu(*(__le16 *)buf_16); |
| } |
| return 0; |
| } |
| |
| /* For bit-sized parameters, retrieve into value */ |
| err = scarlett2_usb_get(mixer, config_item->offset, &value, 1); |
| if (err < 0) |
| return err; |
| |
| /* then unpack from value into buf[] */ |
| buf_8 = buf; |
| for (i = 0; i < 8 && i < count; i++, value >>= 1) |
| *buf_8++ = value & 1; |
| |
| return 0; |
| } |
| |
| /* Send SCARLETT2_USB_DATA_CMD SCARLETT2_USB_CONFIG_SAVE */ |
| static void scarlett2_config_save(struct usb_mixer_interface *mixer) |
| { |
| __le32 req = cpu_to_le32(SCARLETT2_USB_CONFIG_SAVE); |
| |
| scarlett2_usb(mixer, SCARLETT2_USB_DATA_CMD, |
| &req, sizeof(u32), |
| NULL, 0); |
| } |
| |
| /* Delayed work to save config */ |
| static void scarlett2_config_save_work(struct work_struct *work) |
| { |
| struct scarlett2_data *private = |
| container_of(work, struct scarlett2_data, work.work); |
| |
| scarlett2_config_save(private->mixer); |
| } |
| |
| /* Send a USB message to set a SCARLETT2_CONFIG_* parameter */ |
| static int scarlett2_usb_set_config( |
| struct usb_mixer_interface *mixer, |
| int config_item_num, int index, int value) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| const struct scarlett2_config *config_item = |
| &scarlett2_config_items[info->config_set][config_item_num]; |
| struct { |
| __le32 offset; |
| __le32 bytes; |
| __le32 value; |
| } __packed req; |
| __le32 req2; |
| int offset, size; |
| int err; |
| |
| /* Cancel any pending NVRAM save */ |
| cancel_delayed_work_sync(&private->work); |
| |
| /* Convert config_item->size in bits to size in bytes and |
| * calculate offset |
| */ |
| if (config_item->size >= 8) { |
| size = config_item->size / 8; |
| offset = config_item->offset + index * size; |
| |
| /* If updating a bit, retrieve the old value, set/clear the |
| * bit as needed, and update value |
| */ |
| } else { |
| u8 tmp; |
| |
| size = 1; |
| offset = config_item->offset; |
| |
| scarlett2_usb_get(mixer, offset, &tmp, 1); |
| if (value) |
| tmp |= (1 << index); |
| else |
| tmp &= ~(1 << index); |
| |
| value = tmp; |
| } |
| |
| /* Send the configuration parameter data */ |
| req.offset = cpu_to_le32(offset); |
| req.bytes = cpu_to_le32(size); |
| req.value = cpu_to_le32(value); |
| err = scarlett2_usb(mixer, SCARLETT2_USB_SET_DATA, |
| &req, sizeof(u32) * 2 + size, |
| NULL, 0); |
| if (err < 0) |
| return err; |
| |
| /* Activate the change */ |
| req2 = cpu_to_le32(config_item->activate); |
| err = scarlett2_usb(mixer, SCARLETT2_USB_DATA_CMD, |
| &req2, sizeof(req2), NULL, 0); |
| if (err < 0) |
| return err; |
| |
| /* Schedule the change to be written to NVRAM */ |
| if (config_item->activate != SCARLETT2_USB_CONFIG_SAVE) |
| schedule_delayed_work(&private->work, msecs_to_jiffies(2000)); |
| |
| return 0; |
| } |
| |
| /* Send a USB message to get sync status; result placed in *sync */ |
| static int scarlett2_usb_get_sync_status( |
| struct usb_mixer_interface *mixer, |
| u8 *sync) |
| { |
| __le32 data; |
| int err; |
| |
| err = scarlett2_usb(mixer, SCARLETT2_USB_GET_SYNC, |
| NULL, 0, &data, sizeof(data)); |
| if (err < 0) |
| return err; |
| |
| *sync = !!data; |
| return 0; |
| } |
| |
| /* Send a USB message to get volume status; result placed in *buf */ |
| static int scarlett2_usb_get_volume_status( |
| struct usb_mixer_interface *mixer, |
| struct scarlett2_usb_volume_status *buf) |
| { |
| return scarlett2_usb_get(mixer, SCARLETT2_USB_VOLUME_STATUS_OFFSET, |
| buf, sizeof(*buf)); |
| } |
| |
| /* Send a USB message to get the volumes for all inputs of one mix |
| * and put the values into private->mix[] |
| */ |
| static int scarlett2_usb_get_mix(struct usb_mixer_interface *mixer, |
| int mix_num) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| |
| int num_mixer_in = |
| info->port_count[SCARLETT2_PORT_TYPE_MIX][SCARLETT2_PORT_OUT]; |
| int err, i, j, k; |
| |
| struct { |
| __le16 mix_num; |
| __le16 count; |
| } __packed req; |
| |
| __le16 data[SCARLETT2_INPUT_MIX_MAX]; |
| |
| req.mix_num = cpu_to_le16(mix_num); |
| req.count = cpu_to_le16(num_mixer_in); |
| |
| err = scarlett2_usb(mixer, SCARLETT2_USB_GET_MIX, |
| &req, sizeof(req), |
| data, num_mixer_in * sizeof(u16)); |
| if (err < 0) |
| return err; |
| |
| for (i = 0, j = mix_num * num_mixer_in; i < num_mixer_in; i++, j++) { |
| u16 mixer_value = le16_to_cpu(data[i]); |
| |
| for (k = 0; k < SCARLETT2_MIXER_VALUE_COUNT; k++) |
| if (scarlett2_mixer_values[k] >= mixer_value) |
| break; |
| if (k == SCARLETT2_MIXER_VALUE_COUNT) |
| k = SCARLETT2_MIXER_MAX_VALUE; |
| private->mix[j] = k; |
| } |
| |
| return 0; |
| } |
| |
| /* Send a USB message to set the volumes for all inputs of one mix |
| * (values obtained from private->mix[]) |
| */ |
| static int scarlett2_usb_set_mix(struct usb_mixer_interface *mixer, |
| int mix_num) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| |
| struct { |
| __le16 mix_num; |
| __le16 data[SCARLETT2_INPUT_MIX_MAX]; |
| } __packed req; |
| |
| int i, j; |
| int num_mixer_in = |
| info->port_count[SCARLETT2_PORT_TYPE_MIX][SCARLETT2_PORT_OUT]; |
| |
| req.mix_num = cpu_to_le16(mix_num); |
| |
| for (i = 0, j = mix_num * num_mixer_in; i < num_mixer_in; i++, j++) |
| req.data[i] = cpu_to_le16( |
| scarlett2_mixer_values[private->mix[j]] |
| ); |
| |
| return scarlett2_usb(mixer, SCARLETT2_USB_SET_MIX, |
| &req, (num_mixer_in + 1) * sizeof(u16), |
| NULL, 0); |
| } |
| |
| /* Convert a port number index (per info->port_count) to a hardware ID */ |
| static u32 scarlett2_mux_src_num_to_id( |
| const int port_count[][SCARLETT2_PORT_DIRNS], int num) |
| { |
| int port_type; |
| |
| for (port_type = 0; |
| port_type < SCARLETT2_PORT_TYPE_COUNT; |
| port_type++) { |
| if (num < port_count[port_type][SCARLETT2_PORT_IN]) |
| return scarlett2_ports[port_type].id | num; |
| num -= port_count[port_type][SCARLETT2_PORT_IN]; |
| } |
| |
| /* Oops */ |
| return 0; |
| } |
| |
| /* Convert a hardware ID to a port number index */ |
| static u32 scarlett2_mux_id_to_num( |
| const int port_count[][SCARLETT2_PORT_DIRNS], int direction, u32 id) |
| { |
| int port_type; |
| int port_num = 0; |
| |
| for (port_type = 0; |
| port_type < SCARLETT2_PORT_TYPE_COUNT; |
| port_type++) { |
| int base = scarlett2_ports[port_type].id; |
| int count = port_count[port_type][direction]; |
| |
| if (id >= base && id < base + count) |
| return port_num + id - base; |
| port_num += count; |
| } |
| |
| /* Oops */ |
| return -1; |
| } |
| |
| /* Convert one mux entry from the interface and load into private->mux[] */ |
| static void scarlett2_usb_populate_mux(struct scarlett2_data *private, |
| u32 mux_entry) |
| { |
| const struct scarlett2_device_info *info = private->info; |
| const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count; |
| |
| int dst_idx, src_idx; |
| |
| dst_idx = scarlett2_mux_id_to_num(port_count, SCARLETT2_PORT_OUT, |
| mux_entry & 0xFFF); |
| if (dst_idx < 0) |
| return; |
| |
| if (dst_idx >= private->num_mux_dsts) { |
| usb_audio_err(private->mixer->chip, |
| "BUG: scarlett2_mux_id_to_num(%06x, OUT): %d >= %d", |
| mux_entry, dst_idx, private->num_mux_dsts); |
| return; |
| } |
| |
| src_idx = scarlett2_mux_id_to_num(port_count, SCARLETT2_PORT_IN, |
| mux_entry >> 12); |
| if (src_idx < 0) |
| return; |
| |
| if (src_idx >= private->num_mux_srcs) { |
| usb_audio_err(private->mixer->chip, |
| "BUG: scarlett2_mux_id_to_num(%06x, IN): %d >= %d", |
| mux_entry, src_idx, private->num_mux_srcs); |
| return; |
| } |
| |
| private->mux[dst_idx] = src_idx; |
| } |
| |
| /* Send USB message to get mux inputs and then populate private->mux[] */ |
| static int scarlett2_usb_get_mux(struct usb_mixer_interface *mixer) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| int count = private->num_mux_dsts; |
| int err, i; |
| |
| struct { |
| __le16 num; |
| __le16 count; |
| } __packed req; |
| |
| __le32 data[SCARLETT2_MUX_MAX]; |
| |
| private->mux_updated = 0; |
| |
| req.num = 0; |
| req.count = cpu_to_le16(count); |
| |
| err = scarlett2_usb(mixer, SCARLETT2_USB_GET_MUX, |
| &req, sizeof(req), |
| data, count * sizeof(u32)); |
| if (err < 0) |
| return err; |
| |
| for (i = 0; i < count; i++) |
| scarlett2_usb_populate_mux(private, le32_to_cpu(data[i])); |
| |
| return 0; |
| } |
| |
| /* Send USB messages to set mux inputs */ |
| static int scarlett2_usb_set_mux(struct usb_mixer_interface *mixer) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count; |
| int table; |
| |
| struct { |
| __le16 pad; |
| __le16 num; |
| __le32 data[SCARLETT2_MUX_MAX]; |
| } __packed req; |
| |
| req.pad = 0; |
| |
| /* set mux settings for each rate */ |
| for (table = 0; table < SCARLETT2_MUX_TABLES; table++) { |
| const struct scarlett2_mux_entry *entry; |
| |
| /* i counts over the output array */ |
| int i = 0, err; |
| |
| req.num = cpu_to_le16(table); |
| |
| /* loop through each entry */ |
| for (entry = info->mux_assignment[table]; |
| entry->count; |
| entry++) { |
| int j; |
| int port_type = entry->port_type; |
| int port_idx = entry->start; |
| int mux_idx = scarlett2_get_port_start_num(port_count, |
| SCARLETT2_PORT_OUT, port_type) + port_idx; |
| int dst_id = scarlett2_ports[port_type].id + port_idx; |
| |
| /* Empty slots */ |
| if (!dst_id) { |
| for (j = 0; j < entry->count; j++) |
| req.data[i++] = 0; |
| continue; |
| } |
| |
| /* Non-empty mux slots use the lower 12 bits |
| * for the destination and next 12 bits for |
| * the source |
| */ |
| for (j = 0; j < entry->count; j++) { |
| int src_id = scarlett2_mux_src_num_to_id( |
| port_count, private->mux[mux_idx++]); |
| req.data[i++] = cpu_to_le32(dst_id | |
| src_id << 12); |
| dst_id++; |
| } |
| } |
| |
| err = scarlett2_usb(mixer, SCARLETT2_USB_SET_MUX, |
| &req, (i + 1) * sizeof(u32), |
| NULL, 0); |
| if (err < 0) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| /* Send USB message to get meter levels */ |
| static int scarlett2_usb_get_meter_levels(struct usb_mixer_interface *mixer, |
| u16 num_meters, u16 *levels) |
| { |
| struct { |
| __le16 pad; |
| __le16 num_meters; |
| __le32 magic; |
| } __packed req; |
| u32 resp[SCARLETT2_MAX_METERS]; |
| int i, err; |
| |
| req.pad = 0; |
| req.num_meters = cpu_to_le16(num_meters); |
| req.magic = cpu_to_le32(SCARLETT2_USB_METER_LEVELS_GET_MAGIC); |
| err = scarlett2_usb(mixer, SCARLETT2_USB_GET_METER, |
| &req, sizeof(req), resp, num_meters * sizeof(u32)); |
| if (err < 0) |
| return err; |
| |
| /* copy, convert to u16 */ |
| for (i = 0; i < num_meters; i++) |
| levels[i] = resp[i]; |
| |
| return 0; |
| } |
| |
| /*** Control Functions ***/ |
| |
| /* helper function to create a new control */ |
| static int scarlett2_add_new_ctl(struct usb_mixer_interface *mixer, |
| const struct snd_kcontrol_new *ncontrol, |
| int index, int channels, const char *name, |
| struct snd_kcontrol **kctl_return) |
| { |
| struct snd_kcontrol *kctl; |
| struct usb_mixer_elem_info *elem; |
| int err; |
| |
| elem = kzalloc(sizeof(*elem), GFP_KERNEL); |
| if (!elem) |
| return -ENOMEM; |
| |
| /* We set USB_MIXER_BESPOKEN type, so that the core USB mixer code |
| * ignores them for resume and other operations. |
| * Also, the head.id field is set to 0, as we don't use this field. |
| */ |
| elem->head.mixer = mixer; |
| elem->control = index; |
| elem->head.id = 0; |
| elem->channels = channels; |
| elem->val_type = USB_MIXER_BESPOKEN; |
| |
| kctl = snd_ctl_new1(ncontrol, elem); |
| if (!kctl) { |
| kfree(elem); |
| return -ENOMEM; |
| } |
| kctl->private_free = snd_usb_mixer_elem_free; |
| |
| strscpy(kctl->id.name, name, sizeof(kctl->id.name)); |
| |
| err = snd_usb_mixer_add_control(&elem->head, kctl); |
| if (err < 0) |
| return err; |
| |
| if (kctl_return) |
| *kctl_return = kctl; |
| |
| return 0; |
| } |
| |
| /*** Sync Control ***/ |
| |
| /* Update sync control after receiving notification that the status |
| * has changed |
| */ |
| static int scarlett2_update_sync(struct usb_mixer_interface *mixer) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| |
| private->sync_updated = 0; |
| return scarlett2_usb_get_sync_status(mixer, &private->sync); |
| } |
| |
| static int scarlett2_sync_ctl_info(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| static const char *texts[2] = { |
| "Unlocked", "Locked" |
| }; |
| return snd_ctl_enum_info(uinfo, 1, 2, texts); |
| } |
| |
| static int scarlett2_sync_ctl_get(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| mutex_lock(&private->data_mutex); |
| if (private->sync_updated) |
| scarlett2_update_sync(mixer); |
| ucontrol->value.enumerated.item[0] = private->sync; |
| mutex_unlock(&private->data_mutex); |
| |
| return 0; |
| } |
| |
| static const struct snd_kcontrol_new scarlett2_sync_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READ, |
| .name = "", |
| .info = scarlett2_sync_ctl_info, |
| .get = scarlett2_sync_ctl_get |
| }; |
| |
| static int scarlett2_add_sync_ctl(struct usb_mixer_interface *mixer) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| |
| /* devices without a mixer also don't support reporting sync status */ |
| if (private->info->config_set == SCARLETT2_CONFIG_SET_NO_MIXER) |
| return 0; |
| |
| return scarlett2_add_new_ctl(mixer, &scarlett2_sync_ctl, |
| 0, 1, "Sync Status", &private->sync_ctl); |
| } |
| |
| /*** Analogue Line Out Volume Controls ***/ |
| |
| /* Update hardware volume controls after receiving notification that |
| * they have changed |
| */ |
| static int scarlett2_update_volumes(struct usb_mixer_interface *mixer) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| const int (*port_count)[SCARLETT2_PORT_DIRNS] = info->port_count; |
| struct scarlett2_usb_volume_status volume_status; |
| int num_line_out = |
| port_count[SCARLETT2_PORT_TYPE_ANALOGUE][SCARLETT2_PORT_OUT]; |
| int err, i; |
| int mute; |
| |
| private->vol_updated = 0; |
| |
| err = scarlett2_usb_get_volume_status(mixer, &volume_status); |
| if (err < 0) |
| return err; |
| |
| private->master_vol = clamp( |
| volume_status.master_vol + SCARLETT2_VOLUME_BIAS, |
| 0, SCARLETT2_VOLUME_BIAS); |
| |
| if (info->line_out_hw_vol) |
| for (i = 0; i < SCARLETT2_DIM_MUTE_COUNT; i++) |
| private->dim_mute[i] = !!volume_status.dim_mute[i]; |
| |
| mute = private->dim_mute[SCARLETT2_BUTTON_MUTE]; |
| |
| for (i = 0; i < num_line_out; i++) |
| if (private->vol_sw_hw_switch[i]) { |
| private->vol[i] = private->master_vol; |
| private->mute_switch[i] = mute; |
| } |
| |
| return 0; |
| } |
| |
| static int scarlett2_volume_ctl_info(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; |
| uinfo->count = elem->channels; |
| uinfo->value.integer.min = 0; |
| uinfo->value.integer.max = SCARLETT2_VOLUME_BIAS; |
| uinfo->value.integer.step = 1; |
| return 0; |
| } |
| |
| static int scarlett2_master_volume_ctl_get(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| mutex_lock(&private->data_mutex); |
| if (private->vol_updated) |
| scarlett2_update_volumes(mixer); |
| mutex_unlock(&private->data_mutex); |
| |
| ucontrol->value.integer.value[0] = private->master_vol; |
| return 0; |
| } |
| |
| static int line_out_remap(struct scarlett2_data *private, int index) |
| { |
| const struct scarlett2_device_info *info = private->info; |
| |
| if (!info->line_out_remap_enable) |
| return index; |
| return info->line_out_remap[index]; |
| } |
| |
| static int scarlett2_volume_ctl_get(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| int index = line_out_remap(private, elem->control); |
| |
| mutex_lock(&private->data_mutex); |
| if (private->vol_updated) |
| scarlett2_update_volumes(mixer); |
| mutex_unlock(&private->data_mutex); |
| |
| ucontrol->value.integer.value[0] = private->vol[index]; |
| return 0; |
| } |
| |
| static int scarlett2_volume_ctl_put(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| int index = line_out_remap(private, elem->control); |
| int oval, val, err = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->vol[index]; |
| val = ucontrol->value.integer.value[0]; |
| |
| if (oval == val) |
| goto unlock; |
| |
| private->vol[index] = val; |
| err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_LINE_OUT_VOLUME, |
| index, val - SCARLETT2_VOLUME_BIAS); |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static const DECLARE_TLV_DB_MINMAX( |
| db_scale_scarlett2_gain, -SCARLETT2_VOLUME_BIAS * 100, 0 |
| ); |
| |
| static const struct snd_kcontrol_new scarlett2_master_volume_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READ | |
| SNDRV_CTL_ELEM_ACCESS_TLV_READ, |
| .name = "", |
| .info = scarlett2_volume_ctl_info, |
| .get = scarlett2_master_volume_ctl_get, |
| .private_value = 0, /* max value */ |
| .tlv = { .p = db_scale_scarlett2_gain } |
| }; |
| |
| static const struct snd_kcontrol_new scarlett2_line_out_volume_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | |
| SNDRV_CTL_ELEM_ACCESS_TLV_READ, |
| .name = "", |
| .info = scarlett2_volume_ctl_info, |
| .get = scarlett2_volume_ctl_get, |
| .put = scarlett2_volume_ctl_put, |
| .private_value = 0, /* max value */ |
| .tlv = { .p = db_scale_scarlett2_gain } |
| }; |
| |
| /*** Mute Switch Controls ***/ |
| |
| static int scarlett2_mute_ctl_get(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| int index = line_out_remap(private, elem->control); |
| |
| mutex_lock(&private->data_mutex); |
| if (private->vol_updated) |
| scarlett2_update_volumes(mixer); |
| mutex_unlock(&private->data_mutex); |
| |
| ucontrol->value.integer.value[0] = private->mute_switch[index]; |
| return 0; |
| } |
| |
| static int scarlett2_mute_ctl_put(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| int index = line_out_remap(private, elem->control); |
| int oval, val, err = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->mute_switch[index]; |
| val = !!ucontrol->value.integer.value[0]; |
| |
| if (oval == val) |
| goto unlock; |
| |
| private->mute_switch[index] = val; |
| |
| /* Send mute change to the device */ |
| err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_MUTE_SWITCH, |
| index, val); |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static const struct snd_kcontrol_new scarlett2_mute_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = snd_ctl_boolean_mono_info, |
| .get = scarlett2_mute_ctl_get, |
| .put = scarlett2_mute_ctl_put, |
| }; |
| |
| /*** HW/SW Volume Switch Controls ***/ |
| |
| static void scarlett2_sw_hw_ctl_ro(struct scarlett2_data *private, int index) |
| { |
| private->sw_hw_ctls[index]->vd[0].access &= |
| ~SNDRV_CTL_ELEM_ACCESS_WRITE; |
| } |
| |
| static void scarlett2_sw_hw_ctl_rw(struct scarlett2_data *private, int index) |
| { |
| private->sw_hw_ctls[index]->vd[0].access |= |
| SNDRV_CTL_ELEM_ACCESS_WRITE; |
| } |
| |
| static int scarlett2_sw_hw_enum_ctl_info(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| static const char *const values[2] = { |
| "SW", "HW" |
| }; |
| |
| return snd_ctl_enum_info(uinfo, 1, 2, values); |
| } |
| |
| static int scarlett2_sw_hw_enum_ctl_get(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct scarlett2_data *private = elem->head.mixer->private_data; |
| int index = line_out_remap(private, elem->control); |
| |
| ucontrol->value.enumerated.item[0] = private->vol_sw_hw_switch[index]; |
| return 0; |
| } |
| |
| static void scarlett2_vol_ctl_set_writable(struct usb_mixer_interface *mixer, |
| int index, int value) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| struct snd_card *card = mixer->chip->card; |
| |
| /* Set/Clear write bits */ |
| if (value) { |
| private->vol_ctls[index]->vd[0].access |= |
| SNDRV_CTL_ELEM_ACCESS_WRITE; |
| private->mute_ctls[index]->vd[0].access |= |
| SNDRV_CTL_ELEM_ACCESS_WRITE; |
| } else { |
| private->vol_ctls[index]->vd[0].access &= |
| ~SNDRV_CTL_ELEM_ACCESS_WRITE; |
| private->mute_ctls[index]->vd[0].access &= |
| ~SNDRV_CTL_ELEM_ACCESS_WRITE; |
| } |
| |
| /* Notify of write bit and possible value change */ |
| snd_ctl_notify(card, |
| SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO, |
| &private->vol_ctls[index]->id); |
| snd_ctl_notify(card, |
| SNDRV_CTL_EVENT_MASK_VALUE | SNDRV_CTL_EVENT_MASK_INFO, |
| &private->mute_ctls[index]->id); |
| } |
| |
| static int scarlett2_sw_hw_change(struct usb_mixer_interface *mixer, |
| int ctl_index, int val) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| int index = line_out_remap(private, ctl_index); |
| int err; |
| |
| private->vol_sw_hw_switch[index] = val; |
| |
| /* Change access mode to RO (hardware controlled volume) |
| * or RW (software controlled volume) |
| */ |
| scarlett2_vol_ctl_set_writable(mixer, ctl_index, !val); |
| |
| /* Reset volume/mute to master volume/mute */ |
| private->vol[index] = private->master_vol; |
| private->mute_switch[index] = private->dim_mute[SCARLETT2_BUTTON_MUTE]; |
| |
| /* Set SW volume to current HW volume */ |
| err = scarlett2_usb_set_config( |
| mixer, SCARLETT2_CONFIG_LINE_OUT_VOLUME, |
| index, private->master_vol - SCARLETT2_VOLUME_BIAS); |
| if (err < 0) |
| return err; |
| |
| /* Set SW mute to current HW mute */ |
| err = scarlett2_usb_set_config( |
| mixer, SCARLETT2_CONFIG_MUTE_SWITCH, |
| index, private->dim_mute[SCARLETT2_BUTTON_MUTE]); |
| if (err < 0) |
| return err; |
| |
| /* Send SW/HW switch change to the device */ |
| return scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_SW_HW_SWITCH, |
| index, val); |
| } |
| |
| static int scarlett2_sw_hw_enum_ctl_put(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| int ctl_index = elem->control; |
| int index = line_out_remap(private, ctl_index); |
| int oval, val, err = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->vol_sw_hw_switch[index]; |
| val = !!ucontrol->value.enumerated.item[0]; |
| |
| if (oval == val) |
| goto unlock; |
| |
| err = scarlett2_sw_hw_change(mixer, ctl_index, val); |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static const struct snd_kcontrol_new scarlett2_sw_hw_enum_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = scarlett2_sw_hw_enum_ctl_info, |
| .get = scarlett2_sw_hw_enum_ctl_get, |
| .put = scarlett2_sw_hw_enum_ctl_put, |
| }; |
| |
| /*** Line Level/Instrument Level Switch Controls ***/ |
| |
| static int scarlett2_update_input_other(struct usb_mixer_interface *mixer) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| |
| private->input_other_updated = 0; |
| |
| if (info->level_input_count) { |
| int err = scarlett2_usb_get_config( |
| mixer, SCARLETT2_CONFIG_LEVEL_SWITCH, |
| info->level_input_count + info->level_input_first, |
| private->level_switch); |
| if (err < 0) |
| return err; |
| } |
| |
| if (info->pad_input_count) { |
| int err = scarlett2_usb_get_config( |
| mixer, SCARLETT2_CONFIG_PAD_SWITCH, |
| info->pad_input_count, private->pad_switch); |
| if (err < 0) |
| return err; |
| } |
| |
| if (info->air_input_count) { |
| int err = scarlett2_usb_get_config( |
| mixer, SCARLETT2_CONFIG_AIR_SWITCH, |
| info->air_input_count, private->air_switch); |
| if (err < 0) |
| return err; |
| } |
| |
| if (info->phantom_count) { |
| int err = scarlett2_usb_get_config( |
| mixer, SCARLETT2_CONFIG_PHANTOM_SWITCH, |
| info->phantom_count, private->phantom_switch); |
| if (err < 0) |
| return err; |
| |
| err = scarlett2_usb_get_config( |
| mixer, SCARLETT2_CONFIG_PHANTOM_PERSISTENCE, |
| 1, &private->phantom_persistence); |
| if (err < 0) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static int scarlett2_level_enum_ctl_info(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_info *uinfo) |
| { |
| static const char *const values[2] = { |
| "Line", "Inst" |
| }; |
| |
| return snd_ctl_enum_info(uinfo, 1, 2, values); |
| } |
| |
| static int scarlett2_level_enum_ctl_get(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| |
| int index = elem->control + info->level_input_first; |
| |
| mutex_lock(&private->data_mutex); |
| if (private->input_other_updated) |
| scarlett2_update_input_other(mixer); |
| ucontrol->value.enumerated.item[0] = private->level_switch[index]; |
| mutex_unlock(&private->data_mutex); |
| |
| return 0; |
| } |
| |
| static int scarlett2_level_enum_ctl_put(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| |
| int index = elem->control + info->level_input_first; |
| int oval, val, err = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->level_switch[index]; |
| val = !!ucontrol->value.enumerated.item[0]; |
| |
| if (oval == val) |
| goto unlock; |
| |
| private->level_switch[index] = val; |
| |
| /* Send switch change to the device */ |
| err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_LEVEL_SWITCH, |
| index, val); |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static const struct snd_kcontrol_new scarlett2_level_enum_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = scarlett2_level_enum_ctl_info, |
| .get = scarlett2_level_enum_ctl_get, |
| .put = scarlett2_level_enum_ctl_put, |
| }; |
| |
| /*** Pad Switch Controls ***/ |
| |
| static int scarlett2_pad_ctl_get(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| mutex_lock(&private->data_mutex); |
| if (private->input_other_updated) |
| scarlett2_update_input_other(mixer); |
| ucontrol->value.integer.value[0] = |
| private->pad_switch[elem->control]; |
| mutex_unlock(&private->data_mutex); |
| |
| return 0; |
| } |
| |
| static int scarlett2_pad_ctl_put(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| int index = elem->control; |
| int oval, val, err = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->pad_switch[index]; |
| val = !!ucontrol->value.integer.value[0]; |
| |
| if (oval == val) |
| goto unlock; |
| |
| private->pad_switch[index] = val; |
| |
| /* Send switch change to the device */ |
| err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_PAD_SWITCH, |
| index, val); |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static const struct snd_kcontrol_new scarlett2_pad_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = snd_ctl_boolean_mono_info, |
| .get = scarlett2_pad_ctl_get, |
| .put = scarlett2_pad_ctl_put, |
| }; |
| |
| /*** Air Switch Controls ***/ |
| |
| static int scarlett2_air_ctl_get(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| mutex_lock(&private->data_mutex); |
| if (private->input_other_updated) |
| scarlett2_update_input_other(mixer); |
| ucontrol->value.integer.value[0] = private->air_switch[elem->control]; |
| mutex_unlock(&private->data_mutex); |
| |
| return 0; |
| } |
| |
| static int scarlett2_air_ctl_put(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| int index = elem->control; |
| int oval, val, err = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->air_switch[index]; |
| val = !!ucontrol->value.integer.value[0]; |
| |
| if (oval == val) |
| goto unlock; |
| |
| private->air_switch[index] = val; |
| |
| /* Send switch change to the device */ |
| err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_AIR_SWITCH, |
| index, val); |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static const struct snd_kcontrol_new scarlett2_air_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = snd_ctl_boolean_mono_info, |
| .get = scarlett2_air_ctl_get, |
| .put = scarlett2_air_ctl_put, |
| }; |
| |
| /*** Phantom Switch Controls ***/ |
| |
| static int scarlett2_phantom_ctl_get(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| mutex_lock(&private->data_mutex); |
| if (private->input_other_updated) |
| scarlett2_update_input_other(mixer); |
| ucontrol->value.integer.value[0] = |
| private->phantom_switch[elem->control]; |
| mutex_unlock(&private->data_mutex); |
| |
| return 0; |
| } |
| |
| static int scarlett2_phantom_ctl_put(struct snd_kcontrol *kctl, |
| struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| int index = elem->control; |
| int oval, val, err = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->phantom_switch[index]; |
| val = !!ucontrol->value.integer.value[0]; |
| |
| if (oval == val) |
| goto unlock; |
| |
| private->phantom_switch[index] = val; |
| |
| /* Send switch change to the device */ |
| err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_PHANTOM_SWITCH, |
| index, val); |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static const struct snd_kcontrol_new scarlett2_phantom_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = snd_ctl_boolean_mono_info, |
| .get = scarlett2_phantom_ctl_get, |
| .put = scarlett2_phantom_ctl_put, |
| }; |
| |
| /*** Phantom Persistence Control ***/ |
| |
| static int scarlett2_phantom_persistence_ctl_get( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct scarlett2_data *private = elem->head.mixer->private_data; |
| |
| ucontrol->value.integer.value[0] = private->phantom_persistence; |
| return 0; |
| } |
| |
| static int scarlett2_phantom_persistence_ctl_put( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| int index = elem->control; |
| int oval, val, err = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->phantom_persistence; |
| val = !!ucontrol->value.integer.value[0]; |
| |
| if (oval == val) |
| goto unlock; |
| |
| private->phantom_persistence = val; |
| |
| /* Send switch change to the device */ |
| err = scarlett2_usb_set_config( |
| mixer, SCARLETT2_CONFIG_PHANTOM_PERSISTENCE, index, val); |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static const struct snd_kcontrol_new scarlett2_phantom_persistence_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = snd_ctl_boolean_mono_info, |
| .get = scarlett2_phantom_persistence_ctl_get, |
| .put = scarlett2_phantom_persistence_ctl_put, |
| }; |
| |
| /*** Direct Monitor Control ***/ |
| |
| static int scarlett2_update_monitor_other(struct usb_mixer_interface *mixer) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| int err; |
| |
| /* monitor_other_enable[0] enables speaker switching |
| * monitor_other_enable[1] enables talkback |
| */ |
| u8 monitor_other_enable[2]; |
| |
| /* monitor_other_switch[0] activates the alternate speakers |
| * monitor_other_switch[1] activates talkback |
| */ |
| u8 monitor_other_switch[2]; |
| |
| private->monitor_other_updated = 0; |
| |
| if (info->direct_monitor) |
| return scarlett2_usb_get_config( |
| mixer, SCARLETT2_CONFIG_DIRECT_MONITOR, |
| 1, &private->direct_monitor_switch); |
| |
| /* if it doesn't do speaker switching then it also doesn't do |
| * talkback |
| */ |
| if (!info->has_speaker_switching) |
| return 0; |
| |
| err = scarlett2_usb_get_config( |
| mixer, SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE, |
| 2, monitor_other_enable); |
| if (err < 0) |
| return err; |
| |
| err = scarlett2_usb_get_config( |
| mixer, SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH, |
| 2, monitor_other_switch); |
| if (err < 0) |
| return err; |
| |
| if (!monitor_other_enable[0]) |
| private->speaker_switching_switch = 0; |
| else |
| private->speaker_switching_switch = monitor_other_switch[0] + 1; |
| |
| if (info->has_talkback) { |
| const int (*port_count)[SCARLETT2_PORT_DIRNS] = |
| info->port_count; |
| int num_mixes = |
| port_count[SCARLETT2_PORT_TYPE_MIX][SCARLETT2_PORT_IN]; |
| u16 bitmap; |
| int i; |
| |
| if (!monitor_other_enable[1]) |
| private->talkback_switch = 0; |
| else |
| private->talkback_switch = monitor_other_switch[1] + 1; |
| |
| err = scarlett2_usb_get_config(mixer, |
| SCARLETT2_CONFIG_TALKBACK_MAP, |
| 1, &bitmap); |
| if (err < 0) |
| return err; |
| for (i = 0; i < num_mixes; i++, bitmap >>= 1) |
| private->talkback_map[i] = bitmap & 1; |
| } |
| |
| return 0; |
| } |
| |
| static int scarlett2_direct_monitor_ctl_get( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = elem->head.mixer->private_data; |
| |
| mutex_lock(&private->data_mutex); |
| if (private->monitor_other_updated) |
| scarlett2_update_monitor_other(mixer); |
| ucontrol->value.enumerated.item[0] = private->direct_monitor_switch; |
| mutex_unlock(&private->data_mutex); |
| |
| return 0; |
| } |
| |
| static int scarlett2_direct_monitor_ctl_put( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| int index = elem->control; |
| int oval, val, err = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->direct_monitor_switch; |
| val = min(ucontrol->value.enumerated.item[0], 2U); |
| |
| if (oval == val) |
| goto unlock; |
| |
| private->direct_monitor_switch = val; |
| |
| /* Send switch change to the device */ |
| err = scarlett2_usb_set_config( |
| mixer, SCARLETT2_CONFIG_DIRECT_MONITOR, index, val); |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static int scarlett2_direct_monitor_stereo_enum_ctl_info( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) |
| { |
| static const char *const values[3] = { |
| "Off", "Mono", "Stereo" |
| }; |
| |
| return snd_ctl_enum_info(uinfo, 1, 3, values); |
| } |
| |
| /* Direct Monitor for Solo is mono-only and only needs a boolean control |
| * Direct Monitor for 2i2 is selectable between Off/Mono/Stereo |
| */ |
| static const struct snd_kcontrol_new scarlett2_direct_monitor_ctl[2] = { |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = snd_ctl_boolean_mono_info, |
| .get = scarlett2_direct_monitor_ctl_get, |
| .put = scarlett2_direct_monitor_ctl_put, |
| }, |
| { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = scarlett2_direct_monitor_stereo_enum_ctl_info, |
| .get = scarlett2_direct_monitor_ctl_get, |
| .put = scarlett2_direct_monitor_ctl_put, |
| } |
| }; |
| |
| static int scarlett2_add_direct_monitor_ctl(struct usb_mixer_interface *mixer) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| const char *s; |
| |
| if (!info->direct_monitor) |
| return 0; |
| |
| s = info->direct_monitor == 1 |
| ? "Direct Monitor Playback Switch" |
| : "Direct Monitor Playback Enum"; |
| |
| return scarlett2_add_new_ctl( |
| mixer, &scarlett2_direct_monitor_ctl[info->direct_monitor - 1], |
| 0, 1, s, &private->direct_monitor_ctl); |
| } |
| |
| /*** Speaker Switching Control ***/ |
| |
| static int scarlett2_speaker_switch_enum_ctl_info( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) |
| { |
| static const char *const values[3] = { |
| "Off", "Main", "Alt" |
| }; |
| |
| return snd_ctl_enum_info(uinfo, 1, 3, values); |
| } |
| |
| static int scarlett2_speaker_switch_enum_ctl_get( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| mutex_lock(&private->data_mutex); |
| if (private->monitor_other_updated) |
| scarlett2_update_monitor_other(mixer); |
| ucontrol->value.enumerated.item[0] = private->speaker_switching_switch; |
| mutex_unlock(&private->data_mutex); |
| |
| return 0; |
| } |
| |
| /* when speaker switching gets enabled, switch the main/alt speakers |
| * to HW volume and disable those controls |
| */ |
| static int scarlett2_speaker_switch_enable(struct usb_mixer_interface *mixer) |
| { |
| struct snd_card *card = mixer->chip->card; |
| struct scarlett2_data *private = mixer->private_data; |
| int i, err; |
| |
| for (i = 0; i < 4; i++) { |
| int index = line_out_remap(private, i); |
| |
| /* switch the main/alt speakers to HW volume */ |
| if (!private->vol_sw_hw_switch[index]) { |
| err = scarlett2_sw_hw_change(private->mixer, i, 1); |
| if (err < 0) |
| return err; |
| } |
| |
| /* disable the line out SW/HW switch */ |
| scarlett2_sw_hw_ctl_ro(private, i); |
| snd_ctl_notify(card, |
| SNDRV_CTL_EVENT_MASK_VALUE | |
| SNDRV_CTL_EVENT_MASK_INFO, |
| &private->sw_hw_ctls[i]->id); |
| } |
| |
| /* when the next monitor-other notify comes in, update the mux |
| * configuration |
| */ |
| private->speaker_switching_switched = 1; |
| |
| return 0; |
| } |
| |
| /* when speaker switching gets disabled, reenable the hw/sw controls |
| * and invalidate the routing |
| */ |
| static void scarlett2_speaker_switch_disable(struct usb_mixer_interface *mixer) |
| { |
| struct snd_card *card = mixer->chip->card; |
| struct scarlett2_data *private = mixer->private_data; |
| int i; |
| |
| /* enable the line out SW/HW switch */ |
| for (i = 0; i < 4; i++) { |
| scarlett2_sw_hw_ctl_rw(private, i); |
| snd_ctl_notify(card, SNDRV_CTL_EVENT_MASK_INFO, |
| &private->sw_hw_ctls[i]->id); |
| } |
| |
| /* when the next monitor-other notify comes in, update the mux |
| * configuration |
| */ |
| private->speaker_switching_switched = 1; |
| } |
| |
| static int scarlett2_speaker_switch_enum_ctl_put( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| int oval, val, err = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->speaker_switching_switch; |
| val = min(ucontrol->value.enumerated.item[0], 2U); |
| |
| if (oval == val) |
| goto unlock; |
| |
| private->speaker_switching_switch = val; |
| |
| /* enable/disable speaker switching */ |
| err = scarlett2_usb_set_config( |
| mixer, SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE, |
| 0, !!val); |
| if (err < 0) |
| goto unlock; |
| |
| /* if speaker switching is enabled, select main or alt */ |
| err = scarlett2_usb_set_config( |
| mixer, SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH, |
| 0, val == 2); |
| if (err < 0) |
| goto unlock; |
| |
| /* update controls if speaker switching gets enabled or disabled */ |
| if (!oval && val) |
| err = scarlett2_speaker_switch_enable(mixer); |
| else if (oval && !val) |
| scarlett2_speaker_switch_disable(mixer); |
| |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static const struct snd_kcontrol_new scarlett2_speaker_switch_enum_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = scarlett2_speaker_switch_enum_ctl_info, |
| .get = scarlett2_speaker_switch_enum_ctl_get, |
| .put = scarlett2_speaker_switch_enum_ctl_put, |
| }; |
| |
| static int scarlett2_add_speaker_switch_ctl( |
| struct usb_mixer_interface *mixer) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *info = private->info; |
| |
| if (!info->has_speaker_switching) |
| return 0; |
| |
| return scarlett2_add_new_ctl( |
| mixer, &scarlett2_speaker_switch_enum_ctl, |
| 0, 1, "Speaker Switching Playback Enum", |
| &private->speaker_switching_ctl); |
| } |
| |
| /*** Talkback and Talkback Map Controls ***/ |
| |
| static int scarlett2_talkback_enum_ctl_info( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) |
| { |
| static const char *const values[3] = { |
| "Disabled", "Off", "On" |
| }; |
| |
| return snd_ctl_enum_info(uinfo, 1, 3, values); |
| } |
| |
| static int scarlett2_talkback_enum_ctl_get( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| mutex_lock(&private->data_mutex); |
| if (private->monitor_other_updated) |
| scarlett2_update_monitor_other(mixer); |
| ucontrol->value.enumerated.item[0] = private->talkback_switch; |
| mutex_unlock(&private->data_mutex); |
| |
| return 0; |
| } |
| |
| static int scarlett2_talkback_enum_ctl_put( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| |
| int oval, val, err = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->talkback_switch; |
| val = min(ucontrol->value.enumerated.item[0], 2U); |
| |
| if (oval == val) |
| goto unlock; |
| |
| private->talkback_switch = val; |
| |
| /* enable/disable talkback */ |
| err = scarlett2_usb_set_config( |
| mixer, SCARLETT2_CONFIG_MONITOR_OTHER_ENABLE, |
| 1, !!val); |
| if (err < 0) |
| goto unlock; |
| |
| /* if talkback is enabled, select main or alt */ |
| err = scarlett2_usb_set_config( |
| mixer, SCARLETT2_CONFIG_MONITOR_OTHER_SWITCH, |
| 1, val == 2); |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static const struct snd_kcontrol_new scarlett2_talkback_enum_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = scarlett2_talkback_enum_ctl_info, |
| .get = scarlett2_talkback_enum_ctl_get, |
| .put = scarlett2_talkback_enum_ctl_put, |
| }; |
| |
| static int scarlett2_talkback_map_ctl_get( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| int index = elem->control; |
| |
| ucontrol->value.integer.value[0] = private->talkback_map[index]; |
| |
| return 0; |
| } |
| |
| static int scarlett2_talkback_map_ctl_put( |
| struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) |
| { |
| struct usb_mixer_elem_info *elem = kctl->private_data; |
| struct usb_mixer_interface *mixer = elem->head.mixer; |
| struct scarlett2_data *private = mixer->private_data; |
| const int (*port_count)[SCARLETT2_PORT_DIRNS] = |
| private->info->port_count; |
| int num_mixes = port_count[SCARLETT2_PORT_TYPE_MIX][SCARLETT2_PORT_IN]; |
| |
| int index = elem->control; |
| int oval, val, err = 0, i; |
| u16 bitmap = 0; |
| |
| mutex_lock(&private->data_mutex); |
| |
| oval = private->talkback_map[index]; |
| val = !!ucontrol->value.integer.value[0]; |
| |
| if (oval == val) |
| goto unlock; |
| |
| private->talkback_map[index] = val; |
| |
| for (i = 0; i < num_mixes; i++) |
| bitmap |= private->talkback_map[i] << i; |
| |
| /* Send updated bitmap to the device */ |
| err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_TALKBACK_MAP, |
| 0, bitmap); |
| if (err == 0) |
| err = 1; |
| |
| unlock: |
| mutex_unlock(&private->data_mutex); |
| return err; |
| } |
| |
| static const struct snd_kcontrol_new scarlett2_talkback_map_ctl = { |
| .iface = SNDRV_CTL_ELEM_IFACE_MIXER, |
| .name = "", |
| .info = snd_ctl_boolean_mono_info, |
| .get = scarlett2_talkback_map_ctl_get, |
| .put = scarlett2_talkback_map_ctl_put, |
| }; |
| |
| static int scarlett2_add_talkback_ctls( |
| struct usb_mixer_interface *mixer) |
| { |
| struct scarlett2_data *private = mixer->private_data; |
| const struct scarlett2_device_info *inf
|