| /* |
| * asm/tbx.h |
| * |
| * Copyright (C) 2000-2012 Imagination Technologies. |
| * |
| * This program is free software; you can redistribute it and/or modify it under |
| * the terms of the GNU General Public License version 2 as published by the |
| * Free Software Foundation. |
| * |
| * Thread binary interface header |
| */ |
| |
| #ifndef _ASM_METAG_TBX_H_ |
| #define _ASM_METAG_TBX_H_ |
| |
| /* for CACHEW_* values */ |
| #include <asm/metag_isa.h> |
| /* for LINSYSEVENT_* addresses */ |
| #include <asm/metag_mem.h> |
| |
| #ifdef TBI_1_4 |
| #ifndef TBI_MUTEXES_1_4 |
| #define TBI_MUTEXES_1_4 |
| #endif |
| #ifndef TBI_SEMAPHORES_1_4 |
| #define TBI_SEMAPHORES_1_4 |
| #endif |
| #ifndef TBI_ASYNC_SWITCH_1_4 |
| #define TBI_ASYNC_SWITCH_1_4 |
| #endif |
| #ifndef TBI_FASTINT_1_4 |
| #define TBI_FASTINT_1_4 |
| #endif |
| #endif |
| |
| |
| /* Id values in the TBI system describe a segment using an arbitrary |
| integer value and flags in the bottom 8 bits, the SIGPOLL value is |
| used in cases where control over blocking or polling behaviour is |
| needed. */ |
| #define TBID_SIGPOLL_BIT 0x02 /* Set bit in an Id value to poll vs block */ |
| /* Extended segment identifiers use strings in the string table */ |
| #define TBID_IS_SEGSTR( Id ) (((Id) & (TBID_SEGTYPE_BITS>>1)) == 0) |
| |
| /* Segment identifiers contain the following related bit-fields */ |
| #define TBID_SEGTYPE_BITS 0x0F /* One of the predefined segment types */ |
| #define TBID_SEGTYPE_S 0 |
| #define TBID_SEGSCOPE_BITS 0x30 /* Indicates the scope of the segment */ |
| #define TBID_SEGSCOPE_S 4 |
| #define TBID_SEGGADDR_BITS 0xC0 /* Indicates access possible via pGAddr */ |
| #define TBID_SEGGADDR_S 6 |
| |
| /* Segments of memory can only really contain a few types of data */ |
| #define TBID_SEGTYPE_TEXT 0x02 /* Code segment */ |
| #define TBID_SEGTYPE_DATA 0x04 /* Data segment */ |
| #define TBID_SEGTYPE_STACK 0x06 /* Stack segment */ |
| #define TBID_SEGTYPE_HEAP 0x0A /* Heap segment */ |
| #define TBID_SEGTYPE_ROOT 0x0C /* Root block segments */ |
| #define TBID_SEGTYPE_STRING 0x0E /* String table segment */ |
| |
| /* Segments have one of three possible scopes */ |
| #define TBID_SEGSCOPE_INIT 0 /* Temporary area for initialisation phase */ |
| #define TBID_SEGSCOPE_LOCAL 1 /* Private to this thread */ |
| #define TBID_SEGSCOPE_GLOBAL 2 /* Shared globally throughout the system */ |
| #define TBID_SEGSCOPE_SHARED 3 /* Limited sharing between local/global */ |
| |
| /* For segment specifier a further field in two of the remaining bits |
| indicates the usefulness of the pGAddr field in the segment descriptor |
| descriptor. */ |
| #define TBID_SEGGADDR_NULL 0 /* pGAddr is NULL -> SEGSCOPE_(LOCAL|INIT) */ |
| #define TBID_SEGGADDR_READ 1 /* Only read via pGAddr */ |
| #define TBID_SEGGADDR_WRITE 2 /* Full access via pGAddr */ |
| #define TBID_SEGGADDR_EXEC 3 /* Only execute via pGAddr */ |
| |
| /* The following values are common to both segment and signal Id value and |
| live in the top 8 bits of the Id values. */ |
| |
| /* The ISTAT bit indicates if segments are related to interrupt vs |
| background level interfaces a thread can still handle all triggers at |
| either level, but can also split these up if it wants to. */ |
| #define TBID_ISTAT_BIT 0x01000000 |
| #define TBID_ISTAT_S 24 |
| |
| /* Privilege needed to access a segment is indicated by the next bit. |
| |
| This bit is set to mirror the current privilege level when starting a |
| search for a segment - setting it yourself toggles the automatically |
| generated state which is only useful to emulate unprivileged behaviour |
| or access unprivileged areas of memory while at privileged level. */ |
| #define TBID_PSTAT_BIT 0x02000000 |
| #define TBID_PSTAT_S 25 |
| |
| /* The top six bits of a signal/segment specifier identifies a thread within |
| the system. This represents a segments owner. */ |
| #define TBID_THREAD_BITS 0xFC000000 |
| #define TBID_THREAD_S 26 |
| |
| /* Special thread id values */ |
| #define TBID_THREAD_NULL (-32) /* Never matches any thread/segment id used */ |
| #define TBID_THREAD_GLOBAL (-31) /* Things global to all threads */ |
| #define TBID_THREAD_HOST ( -1) /* Host interface */ |
| #define TBID_THREAD_EXTIO (TBID_THREAD_HOST) /* Host based ExtIO i/f */ |
| |
| /* Virtual Id's are used for external thread interface structures or the |
| above special Id's */ |
| #define TBID_IS_VIRTTHREAD( Id ) ((Id) < 0) |
| |
| /* Real Id's are used for actual hardware threads that are local */ |
| #define TBID_IS_REALTHREAD( Id ) ((Id) >= 0) |
| |
| /* Generate a segment Id given Thread, Scope, and Type */ |
| #define TBID_SEG( Thread, Scope, Type ) (\ |
| ((Thread)<<TBID_THREAD_S) + ((Scope)<<TBID_SEGSCOPE_S) + (Type)) |
| |
| /* Generate a signal Id given Thread and SigNum */ |
| #define TBID_SIG( Thread, SigNum ) (\ |
| ((Thread)<<TBID_THREAD_S) + ((SigNum)<<TBID_SIGNUM_S) + TBID_SIGNAL_BIT) |
| |
| /* Generate an Id that solely represents a thread - useful for cache ops */ |
| #define TBID_THD( Thread ) ((Thread)<<TBID_THREAD_S) |
| #define TBID_THD_NULL ((TBID_THREAD_NULL) <<TBID_THREAD_S) |
| #define TBID_THD_GLOBAL ((TBID_THREAD_GLOBAL)<<TBID_THREAD_S) |
| |
| /* Common exception handler (see TBID_SIGNUM_XXF below) receives hardware |
| generated fault codes TBIXXF_SIGNUM_xxF in it's SigNum parameter */ |
| #define TBIXXF_SIGNUM_IIF 0x01 /* General instruction fault */ |
| #define TBIXXF_SIGNUM_PGF 0x02 /* Privilege general fault */ |
| #define TBIXXF_SIGNUM_DHF 0x03 /* Data access watchpoint HIT */ |
| #define TBIXXF_SIGNUM_IGF 0x05 /* Code fetch general read failure */ |
| #define TBIXXF_SIGNUM_DGF 0x07 /* Data access general read/write fault */ |
| #define TBIXXF_SIGNUM_IPF 0x09 /* Code fetch page fault */ |
| #define TBIXXF_SIGNUM_DPF 0x0B /* Data access page fault */ |
| #define TBIXXF_SIGNUM_IHF 0x0D /* Instruction breakpoint HIT */ |
| #define TBIXXF_SIGNUM_DWF 0x0F /* Data access read-only fault */ |
| |
| /* Hardware signals communicate events between processing levels within a |
| single thread all the _xxF cases are exceptions and are routed via a |
| common exception handler, _SWx are software trap events and kicks including |
| __TBISignal generated kicks, and finally _TRx are hardware triggers */ |
| #define TBID_SIGNUM_SW0 0x00 /* SWITCH GROUP 0 - Per thread user */ |
| #define TBID_SIGNUM_SW1 0x01 /* SWITCH GROUP 1 - Per thread system */ |
| #define TBID_SIGNUM_SW2 0x02 /* SWITCH GROUP 2 - Internal global request */ |
| #define TBID_SIGNUM_SW3 0x03 /* SWITCH GROUP 3 - External global request */ |
| #ifdef TBI_1_4 |
| #define TBID_SIGNUM_FPE 0x04 /* Deferred exception - Any IEEE 754 exception */ |
| #define TBID_SIGNUM_FPD 0x05 /* Deferred exception - Denormal exception */ |
| /* Reserved 0x6 for a reserved deferred exception */ |
| #define TBID_SIGNUM_BUS 0x07 /* Deferred exception - Bus Error */ |
| /* Reserved 0x08-0x09 */ |
| #else |
| /* Reserved 0x04-0x09 */ |
| #endif |
| /* Reserved 0x0A-0x0F */ |
| #define TBID_SIGNUM_TRT 0x10 /* Timer trigger */ |
| #define TBID_SIGNUM_LWK 0x11 /* Low level kick */ |
| #define TBID_SIGNUM_XXF 0x12 /* Fault handler - receives ALL _xxF sigs */ |
| #ifdef TBI_1_4 |
| #define TBID_SIGNUM_DFR 0x13 /* Deferred Exception handler */ |
| #else |
| #define TBID_SIGNUM_FPE 0x13 /* FPE Exception handler */ |
| #endif |
| /* External trigger one group 0x14 to 0x17 - per thread */ |
| #define TBID_SIGNUM_TR1(Thread) (0x14+(Thread)) |
| #define TBID_SIGNUM_T10 0x14 |
| #define TBID_SIGNUM_T11 0x15 |
| #define TBID_SIGNUM_T12 0x16 |
| #define TBID_SIGNUM_T13 0x17 |
| /* External trigger two group 0x18 to 0x1b - per thread */ |
| #define TBID_SIGNUM_TR2(Thread) (0x18+(Thread)) |
| #define TBID_SIGNUM_T20 0x18 |
| #define TBID_SIGNUM_T21 0x19 |
| #define TBID_SIGNUM_T22 0x1A |
| #define TBID_SIGNUM_T23 0x1B |
| #define TBID_SIGNUM_TR3 0x1C /* External trigger N-4 (global) */ |
| #define TBID_SIGNUM_TR4 0x1D /* External trigger N-3 (global) */ |
| #define TBID_SIGNUM_TR5 0x1E /* External trigger N-2 (global) */ |
| #define TBID_SIGNUM_TR6 0x1F /* External trigger N-1 (global) */ |
| #define TBID_SIGNUM_MAX 0x1F |
| |
| /* Return the trigger register(TXMASK[I]/TXSTAT[I]) bits related to |
| each hardware signal, sometimes this is a many-to-one relationship. */ |
| #define TBI_TRIG_BIT(SigNum) (\ |
| ((SigNum) >= TBID_SIGNUM_TRT) ? 1<<((SigNum)-TBID_SIGNUM_TRT) :\ |
| ((SigNum) == TBID_SIGNUM_LWK) ? \ |
| TXSTAT_KICK_BIT : TXSTATI_BGNDHALT_BIT ) |
| |
| /* Return the hardware trigger vector number for entries in the |
| HWVEC0EXT table that will generate the required internal trigger. */ |
| #define TBI_TRIG_VEC(SigNum) (\ |
| ((SigNum) >= TBID_SIGNUM_T10) ? ((SigNum)-TBID_SIGNUM_TRT) : -1) |
| |
| /* Default trigger masks for each thread at background/interrupt level */ |
| #define TBI_TRIGS_INIT( Thread ) (\ |
| TXSTAT_KICK_BIT + TBI_TRIG_BIT(TBID_SIGNUM_TR1(Thread)) ) |
| #define TBI_INTS_INIT( Thread ) (\ |
| TXSTAT_KICK_BIT + TXSTATI_BGNDHALT_BIT \ |
| + TBI_TRIG_BIT(TBID_SIGNUM_TR2(Thread)) ) |
| |
| #ifndef __ASSEMBLY__ |
| /* A spin-lock location is a zero-initialised location in memory */ |
| typedef volatile int TBISPIN, *PTBISPIN; |
| |
| /* A kick location is a hardware location you can write to |
| * in order to cause a kick |
| */ |
| typedef volatile int *PTBIKICK; |
| |
| #if defined(METAC_1_0) || defined(METAC_1_1) |
| /* Macro to perform a kick */ |
| #define TBI_KICK( pKick ) do { pKick[0] = 1; } while (0) |
| #else |
| /* #define METAG_LIN_VALUES before including machine.h if required */ |
| #ifdef LINSYSEVENT_WR_COMBINE_FLUSH |
| /* Macro to perform a kick - write combiners must be flushed */ |
| #define TBI_KICK( pKick ) do {\ |
| volatile int *pFlush = (volatile int *) LINSYSEVENT_WR_COMBINE_FLUSH; \ |
| pFlush[0] = 0; \ |
| pKick[0] = 1; } while (0) |
| #endif |
| #endif /* if defined(METAC_1_0) || defined(METAC_1_1) */ |
| #endif /* ifndef __ASSEMBLY__ */ |
| |
| #ifndef __ASSEMBLY__ |
| /* 64-bit dual unit state value */ |
| typedef struct _tbidual_tag_ { |
| /* 32-bit value from a pair of registers in data or address units */ |
| int U0, U1; |
| } TBIDUAL, *PTBIDUAL; |
| #endif /* ifndef __ASSEMBLY__ */ |
| |
| /* Byte offsets of fields within TBIDUAL */ |
| #define TBIDUAL_U0 (0) |
| #define TBIDUAL_U1 (4) |
| |
| #define TBIDUAL_BYTES (8) |
| |
| #define TBICTX_CRIT_BIT 0x0001 /* ASync state saved in TBICTX */ |
| #define TBICTX_SOFT_BIT 0x0002 /* Sync state saved in TBICTX (other bits 0) */ |
| #ifdef TBI_FASTINT_1_4 |
| #define TBICTX_FINT_BIT 0x0004 /* Using Fast Interrupts */ |
| #endif |
| #define TBICTX_FPAC_BIT 0x0010 /* FPU state in TBICTX, FPU active on entry */ |
| #define TBICTX_XMCC_BIT 0x0020 /* Bit to identify a MECC task */ |
| #define TBICTX_CBUF_BIT 0x0040 /* Hardware catch buffer flag from TXSTATUS */ |
| #define TBICTX_CBRP_BIT 0x0080 /* Read pipeline dirty from TXDIVTIME */ |
| #define TBICTX_XDX8_BIT 0x0100 /* Saved DX.8 to DX.15 too */ |
| #define TBICTX_XAXX_BIT 0x0200 /* Save remaining AX registers to AX.7 */ |
| #define TBICTX_XHL2_BIT 0x0400 /* Saved hardware loop registers too */ |
| #define TBICTX_XTDP_BIT 0x0800 /* Saved DSP registers too */ |
| #define TBICTX_XEXT_BIT 0x1000 /* Set if TBICTX.Ext.Ctx contains extended |
| state save area, otherwise TBICTX.Ext.AX2 |
| just holds normal A0.2 and A1.2 states */ |
| #define TBICTX_WAIT_BIT 0x2000 /* Causes wait for trigger - sticky toggle */ |
| #define TBICTX_XCBF_BIT 0x4000 /* Catch buffer or RD extracted into TBICTX */ |
| #define TBICTX_PRIV_BIT 0x8000 /* Set if system uses 'privileged' model */ |
| |
| #ifdef METAC_1_0 |
| #define TBICTX_XAX3_BIT 0x0200 /* Saved AX.5 to AX.7 for XAXX */ |
| #define TBICTX_AX_REGS 5 /* Ax.0 to Ax.4 are core GP regs on CHORUS */ |
| #else |
| #define TBICTX_XAX4_BIT 0x0200 /* Saved AX.4 to AX.7 for XAXX */ |
| #define TBICTX_AX_REGS 4 /* Default is Ax.0 to Ax.3 */ |
| #endif |
| |
| #ifdef TBI_1_4 |
| #define TBICTX_CFGFPU_FX16_BIT 0x00010000 /* Save FX.8 to FX.15 too */ |
| |
| /* The METAC_CORE_ID_CONFIG field indicates omitted DSP resources */ |
| #define METAC_COREID_CFGXCTX_MASK( Value ) (\ |
| ( (((Value & METAC_COREID_CFGDSP_BITS)>> \ |
| METAC_COREID_CFGDSP_S ) == METAC_COREID_CFGDSP_MIN) ? \ |
| ~(TBICTX_XHL2_BIT+TBICTX_XTDP_BIT+ \ |
| TBICTX_XAXX_BIT+TBICTX_XDX8_BIT ) : ~0U ) ) |
| #endif |
| |
| /* Extended context state provides a standardised method for registering the |
| arguments required by __TBICtxSave to save the additional register states |
| currently in use by non general purpose code. The state of the __TBIExtCtx |
| variable in the static space of the thread forms an extension of the base |
| context of the thread. |
| |
| If ( __TBIExtCtx.Ctx.SaveMask == 0 ) then pExt is assumed to be NULL and |
| the empty state of __TBIExtCtx is represented by the fact that |
| TBICTX.SaveMask does not have the bit TBICTX_XEXT_BIT set. |
| |
| If ( __TBIExtCtx.Ctx.SaveMask != 0 ) then pExt should point at a suitably |
| sized extended context save area (usually at the end of the stack space |
| allocated by the current routine). This space should allow for the |
| displaced state of A0.2 and A1.2 to be saved along with the other extended |
| states indicated via __TBIExtCtx.Ctx.SaveMask. */ |
| #ifndef __ASSEMBLY__ |
| typedef union _tbiextctx_tag_ { |
| long long Val; |
| TBIDUAL AX2; |
| struct _tbiextctxext_tag { |
| #ifdef TBI_1_4 |
| short DspramSizes; /* DSPRAM sizes. Encoding varies between |
| TBICtxAlloc and the ECH scheme. */ |
| #else |
| short Reserved0; |
| #endif |
| short SaveMask; /* Flag bits for state saved */ |
| PTBIDUAL pExt; /* AX[2] state saved first plus Xxxx state */ |
| |
| } Ctx; |
| |
| } TBIEXTCTX, *PTBIEXTCTX; |
| |
| /* Automatic registration of extended context save for __TBINestInts */ |
| extern TBIEXTCTX __TBIExtCtx; |
| #endif /* ifndef __ASSEMBLY__ */ |
| |
| /* Byte offsets of fields within TBIEXTCTX */ |
| #define TBIEXTCTX_AX2 (0) |
| #define TBIEXTCTX_Ctx (0) |
| #define TBIEXTCTX_Ctx_SaveMask (TBIEXTCTX_Ctx + 2) |
| #define TBIEXTCTX_Ctx_pExt (TBIEXTCTX_Ctx + 2 + 2) |
| |
| /* Extended context data size calculation constants */ |
| #define TBICTXEXT_BYTES (8) |
| #define TBICTXEXTBB8_BYTES (8*8) |
| #define TBICTXEXTAX3_BYTES (3*8) |
| #define TBICTXEXTAX4_BYTES (4*8) |
| #ifdef METAC_1_0 |
| #define TBICTXEXTAXX_BYTES TBICTXEXTAX3_BYTES |
| #else |
| #define TBICTXEXTAXX_BYTES TBICTXEXTAX4_BYTES |
| #endif |
| #define TBICTXEXTHL2_BYTES (3*8) |
| #define TBICTXEXTTDR_BYTES (27*8) |
| #define TBICTXEXTTDP_BYTES TBICTXEXTTDR_BYTES |
| |
| #ifdef TBI_1_4 |
| #define TBICTXEXTFX8_BYTES (4*8) |
| #define TBICTXEXTFPAC_BYTES (1*4 + 2*2 + 4*8) |
| #define TBICTXEXTFACF_BYTES (3*8) |
| #endif |
| |
| /* Maximum flag bits to be set via the TBICTX_EXTSET macro */ |
| #define TBICTXEXT_MAXBITS (TBICTX_XEXT_BIT| \ |
| TBICTX_XDX8_BIT|TBICTX_XAXX_BIT|\ |
| TBICTX_XHL2_BIT|TBICTX_XTDP_BIT ) |
| |
| /* Maximum size of the extended context save area for current variant */ |
| #define TBICTXEXT_MAXBYTES (TBICTXEXT_BYTES+TBICTXEXTBB8_BYTES+\ |
| TBICTXEXTAXX_BYTES+TBICTXEXTHL2_BYTES+\ |
| TBICTXEXTTDP_BYTES ) |
| |
| #ifdef TBI_FASTINT_1_4 |
| /* Maximum flag bits to be set via the TBICTX_EXTSET macro */ |
| #define TBICTX2EXT_MAXBITS (TBICTX_XDX8_BIT|TBICTX_XAXX_BIT|\ |
| TBICTX_XHL2_BIT|TBICTX_XTDP_BIT ) |
| |
| /* Maximum size of the extended context save area for current variant */ |
| #define TBICTX2EXT_MAXBYTES (TBICTXEXTBB8_BYTES+TBICTXEXTAXX_BYTES\ |
| +TBICTXEXTHL2_BYTES+TBICTXEXTTDP_BYTES ) |
| #endif |
| |
| /* Specify extended resources being used by current routine, code must be |
| assembler generated to utilise extended resources- |
| |
| MOV D0xxx,A0StP ; Perform alloca - routine should |
| ADD A0StP,A0StP,#SaveSize ; setup/use A0FrP to access locals |
| MOVT D1xxx,#SaveMask ; TBICTX_XEXT_BIT MUST be set |
| SETL [A1GbP+#OG(___TBIExtCtx)],D0xxx,D1xxx |
| |
| NB: OG(___TBIExtCtx) is a special case supported for SETL/GETL operations |
| on 64-bit sizes structures only, other accesses must be based on use |
| of OGA(___TBIExtCtx). |
| |
| At exit of routine- |
| |
| MOV D0xxx,#0 ; Clear extended context save state |
| MOV D1xxx,#0 |
| SETL [A1GbP+#OG(___TBIExtCtx)],D0xxx,D1xxx |
| SUB A0StP,A0StP,#SaveSize ; If original A0StP required |
| |
| NB: Both the setting and clearing of the whole __TBIExtCtx MUST be done |
| atomically in one 64-bit write operation. |
| |
| For simple interrupt handling only via __TBINestInts there should be no |
| impact of the __TBIExtCtx system. If pre-emptive scheduling is being |
| performed however (assuming __TBINestInts has already been called earlier |
| on) then the following logic will correctly call __TBICtxSave if required |
| and clear out the currently selected background task- |
| |
| if ( __TBIExtCtx.Ctx.SaveMask & TBICTX_XEXT_BIT ) |
| { |
| / * Store extended states in pCtx * / |
| State.Sig.SaveMask |= __TBIExtCtx.Ctx.SaveMask; |
| |
| (void) __TBICtxSave( State, (void *) __TBIExtCtx.Ctx.pExt ); |
| __TBIExtCtx.Val = 0; |
| } |
| |
| and when restoring task states call __TBICtxRestore- |
| |
| / * Restore state from pCtx * / |
| State.Sig.pCtx = pCtx; |
| State.Sig.SaveMask = pCtx->SaveMask; |
| |
| if ( State.Sig.SaveMask & TBICTX_XEXT_BIT ) |
| { |
| / * Restore extended states from pCtx * / |
| __TBIExtCtx.Val = pCtx->Ext.Val; |
| |
| (void) __TBICtxRestore( State, (void *) __TBIExtCtx.Ctx.pExt ); |
| } |
| |
| */ |
| |
| /* Critical thread state save area */ |
| #ifndef __ASSEMBLY__ |
| typedef struct _tbictx_tag_ { |
| /* TXSTATUS_FLAG_BITS and TXSTATUS_LSM_STEP_BITS from TXSTATUS */ |
| short Flags; |
| /* Mask indicates any extended context state saved; 0 -> Never run */ |
| short SaveMask; |
| /* Saved PC value */ |
| int CurrPC; |
| /* Saved critical register states */ |
| TBIDUAL DX[8]; |
| /* Background control register states - for cores without catch buffer |
| base in DIVTIME the TXSTATUS bits RPVALID and RPMASK are stored with |
| the real state TXDIVTIME in CurrDIVTIME */ |
| int CurrRPT, CurrBPOBITS, CurrMODE, CurrDIVTIME; |
| /* Saved AX register states */ |
| TBIDUAL AX[2]; |
| TBIEXTCTX Ext; |
| TBIDUAL AX3[TBICTX_AX_REGS-3]; |
| |
| /* Any CBUF state to be restored by a handler return must be stored here. |
| Other extended state can be stored anywhere - see __TBICtxSave and |
| __TBICtxRestore. */ |
| |
| } TBICTX, *PTBICTX; |
| |
| #ifdef TBI_FASTINT_1_4 |
| typedef struct _tbictx2_tag_ { |
| TBIDUAL AX[2]; /* AU.0, AU.1 */ |
| TBIDUAL DX[2]; /* DU.0, DU.4 */ |
| int CurrMODE; |
| int CurrRPT; |
| int CurrSTATUS; |
| void *CurrPC; /* PC in PC address space */ |
| } TBICTX2, *PTBICTX2; |
| /* TBICTX2 is followed by: |
| * TBICTXEXTCB0 if TXSTATUS.CBMarker |
| * TBIDUAL * TXSTATUS.IRPCount if TXSTATUS.IRPCount > 0 |
| * TBICTXGP if using __TBIStdRootIntHandler or __TBIStdCtxSwitchRootIntHandler |
| */ |
| |
| typedef struct _tbictxgp_tag_ { |
| short DspramSizes; |
| short SaveMask; |
| void *pExt; |
| TBIDUAL DX[6]; /* DU.1-DU.3, DU.5-DU.7 */ |
| TBIDUAL AX[2]; /* AU.2-AU.3 */ |
| } TBICTXGP, *PTBICTXGP; |
| |
| #define TBICTXGP_DspramSizes (0) |
| #define TBICTXGP_SaveMask (TBICTXGP_DspramSizes + 2) |
| #define TBICTXGP_MAX_BYTES (2 + 2 + 4 + 8*(6+2)) |
| |
| #endif |
| #endif /* ifndef __ASSEMBLY__ */ |
| |
| /* Byte offsets of fields within TBICTX */ |
| #define TBICTX_Flags (0) |
| #define TBICTX_SaveMask (2) |
| #define TBICTX_CurrPC (4) |
| #define TBICTX_DX (2 + 2 + 4) |
| #define TBICTX_CurrRPT (2 + 2 + 4 + 8 * 8) |
| #define TBICTX_CurrMODE (2 + 2 + 4 + 8 * 8 + 4 + 4) |
| #define TBICTX_AX (2 + 2 + 4 + 8 * 8 + 4 + 4 + 4 + 4) |
| #define TBICTX_Ext (2 + 2 + 4 + 8 * 8 + 4 + 4 + 4 + 4 + 2 * 8) |
| #define TBICTX_Ext_AX2 (TBICTX_Ext + TBIEXTCTX_AX2) |
| #define TBICTX_Ext_AX2_U0 (TBICTX_Ext + TBIEXTCTX_AX2 + TBIDUAL_U0) |
| #define TBICTX_Ext_AX2_U1 (TBICTX_Ext + TBIEXTCTX_AX2 + TBIDUAL_U1) |
| #define TBICTX_Ext_Ctx_pExt (TBICTX_Ext + TBIEXTCTX_Ctx_pExt) |
| #define TBICTX_Ext_Ctx_SaveMask (TBICTX_Ext + TBIEXTCTX_Ctx_SaveMask) |
| |
| #ifdef TBI_FASTINT_1_4 |
| #define TBICTX2_BYTES (8 * 2 + 8 * 2 + 4 + 4 + 4 + 4) |
| #define TBICTXEXTCB0_BYTES (4 + 4 + 8) |
| |
| #define TBICTX2_CRIT_MAX_BYTES (TBICTX2_BYTES + TBICTXEXTCB0_BYTES + 6 * TBIDUAL_BYTES) |
| #define TBI_SWITCH_NEXT_PC(PC, EXTRA) ((PC) + (EXTRA & 1) ? 8 : 4) |
| #endif |
| |
| #ifndef __ASSEMBLY__ |
| /* Extended thread state save areas - catch buffer state element */ |
| typedef struct _tbictxextcb0_tag_ { |
| /* Flags data and address value - see METAC_CATCH_VALUES in machine.h */ |
| unsigned long CBFlags, CBAddr; |
| /* 64-bit data */ |
| TBIDUAL CBData; |
| |
| } TBICTXEXTCB0, *PTBICTXEXTCB0; |
| |
| /* Read pipeline state saved on later cores after single catch buffer slot */ |
| typedef struct _tbictxextrp6_tag_ { |
| /* RPMask is TXSTATUS_RPMASK_BITS only, reserved is undefined */ |
| unsigned long RPMask, Reserved0; |
| TBIDUAL CBData[6]; |
| |
| } TBICTXEXTRP6, *PTBICTXEXTRP6; |
| |
| /* Extended thread state save areas - 8 DU register pairs */ |
| typedef struct _tbictxextbb8_tag_ { |
| /* Remaining Data unit registers in 64-bit pairs */ |
| TBIDUAL UX[8]; |
| |
| } TBICTXEXTBB8, *PTBICTXEXTBB8; |
| |
| /* Extended thread state save areas - 3 AU register pairs */ |
| typedef struct _tbictxextbb3_tag_ { |
| /* Remaining Address unit registers in 64-bit pairs */ |
| TBIDUAL UX[3]; |
| |
| } TBICTXEXTBB3, *PTBICTXEXTBB3; |
| |
| /* Extended thread state save areas - 4 AU register pairs or 4 FX pairs */ |
| typedef struct _tbictxextbb4_tag_ { |
| /* Remaining Address unit or FPU registers in 64-bit pairs */ |
| TBIDUAL UX[4]; |
| |
| } TBICTXEXTBB4, *PTBICTXEXTBB4; |
| |
| /* Extended thread state save areas - Hardware loop states (max 2) */ |
| typedef struct _tbictxexthl2_tag_ { |
| /* Hardware looping register states */ |
| TBIDUAL Start, End, Count; |
| |
| } TBICTXEXTHL2, *PTBICTXEXTHL2; |
| |
| /* Extended thread state save areas - DSP register states */ |
| typedef struct _tbictxexttdp_tag_ { |
| /* DSP 32-bit accumulator register state (Bits 31:0 of ACX.0) */ |
| TBIDUAL Acc32[1]; |
| /* DSP > 32-bit accumulator bits 63:32 of ACX.0 (zero-extended) */ |
| TBIDUAL Acc64[1]; |
| /* Twiddle register state, and three phase increment states */ |
| TBIDUAL PReg[4]; |
| /* Modulo region size, padded to 64-bits */ |
| int CurrMRSIZE, Reserved0; |
| |
| } TBICTXEXTTDP, *PTBICTXEXTTDP; |
| |
| /* Extended thread state save areas - DSP register states including DSP RAM */ |
| typedef struct _tbictxexttdpr_tag_ { |
| /* DSP 32-bit accumulator register state (Bits 31:0 of ACX.0) */ |
| TBIDUAL Acc32[1]; |
| /* DSP 40-bit accumulator register state (Bits 39:8 of ACX.0) */ |
| TBIDUAL Acc40[1]; |
| /* DSP RAM Pointers */ |
| TBIDUAL RP0[2], WP0[2], RP1[2], WP1[2]; |
| /* DSP RAM Increments */ |
| TBIDUAL RPI0[2], WPI0[2], RPI1[2], WPI1[2]; |
| /* Template registers */ |
| unsigned long Tmplt[16]; |
| /* Modulo address region size and DSP RAM module region sizes */ |
| int CurrMRSIZE, CurrDRSIZE; |
| |
| } TBICTXEXTTDPR, *PTBICTXEXTTDPR; |
| |
| #ifdef TBI_1_4 |
| /* The METAC_ID_CORE register state is a marker for the FPU |
| state that is then stored after this core header structure. */ |
| #define TBICTXEXTFPU_CONFIG_MASK ( (METAC_COREID_NOFPACC_BIT+ \ |
| METAC_COREID_CFGFPU_BITS ) << \ |
| METAC_COREID_CONFIG_BITS ) |
| |
| /* Recorded FPU exception state from TXDEFR in DefrFpu */ |
| #define TBICTXEXTFPU_DEFRFPU_MASK (TXDEFR_FPU_FE_BITS) |
| |
| /* Extended thread state save areas - FPU register states */ |
| typedef struct _tbictxextfpu_tag_ { |
| /* Stored METAC_CORE_ID CONFIG */ |
| int CfgFpu; |
| /* Stored deferred TXDEFR bits related to FPU |
| * |
| * This is encoded as follows in order to fit into 16-bits: |
| * DefrFPU:15 - 14 <= 0 |
| * :13 - 8 <= TXDEFR:21-16 |
| * : 7 - 6 <= 0 |
| * : 5 - 0 <= TXDEFR:5-0 |
| */ |
| short DefrFpu; |
| |
| /* TXMODE bits related to FPU */ |
| short ModeFpu; |
| |
| /* FPU Even/Odd register states */ |
| TBIDUAL FX[4]; |
| |
| /* if CfgFpu & TBICTX_CFGFPU_FX16_BIT -> 1 then TBICTXEXTBB4 holds FX.8-15 */ |
| /* if CfgFpu & TBICTX_CFGFPU_NOACF_BIT -> 0 then TBICTXEXTFPACC holds state */ |
| } TBICTXEXTFPU, *PTBICTXEXTFPU; |
| |
| /* Extended thread state save areas - FPU accumulator state */ |
| typedef struct _tbictxextfpacc_tag_ { |
| /* FPU accumulator register state - three 64-bit parts */ |
| TBIDUAL FAcc32[3]; |
| |
| } TBICTXEXTFPACC, *PTBICTXEXTFPACC; |
| #endif |
| |
| /* Prototype TBI structure */ |
| struct _tbi_tag_ ; |
| |
| /* A 64-bit return value used commonly in the TBI APIs */ |
| typedef union _tbires_tag_ { |
| /* Save and load this value to get/set the whole result quickly */ |
| long long Val; |
| |
| /* Parameter of a fnSigs or __TBICtx* call */ |
| struct _tbires_sig_tag_ { |
| /* TXMASK[I] bits zeroed upto and including current trigger level */ |
| unsigned short TrigMask; |
| /* Control bits for handlers - see PTBIAPIFN documentation below */ |
| unsigned short SaveMask; |
| /* Pointer to the base register context save area of the thread */ |
| PTBICTX pCtx; |
| } Sig; |
| |
| /* Result of TBIThrdPrivId call */ |
| struct _tbires_thrdprivid_tag_ { |
| /* Basic thread identifier; just TBID_THREAD_BITS */ |
| int Id; |
| /* None thread number bits; TBID_ISTAT_BIT+TBID_PSTAT_BIT */ |
| int Priv; |
| } Thrd; |
| |
| /* Parameter and Result of a __TBISwitch call */ |
| struct _tbires_switch_tag_ { |
| /* Parameter passed across context switch */ |
| void *pPara; |
| /* Thread context of other Thread includng restore flags */ |
| PTBICTX pCtx; |
| } Switch; |
| |
| /* For extended S/W events only */ |
| struct _tbires_ccb_tag_ { |
| void *pCCB; |
| int COff; |
| } CCB; |
| |
| struct _tbires_tlb_tag_ { |
| int Leaf; /* TLB Leaf data */ |
| int Flags; /* TLB Flags */ |
| } Tlb; |
| |
| #ifdef TBI_FASTINT_1_4 |
| struct _tbires_intr_tag_ { |
| short TrigMask; |
| short SaveMask; |
| PTBICTX2 pCtx; |
| } Intr; |
| #endif |
| |
| } TBIRES, *PTBIRES; |
| #endif /* ifndef __ASSEMBLY__ */ |
| |
| #ifndef __ASSEMBLY__ |
| /* Prototype for all signal handler functions, called via ___TBISyncTrigger or |
| ___TBIASyncTrigger. |
| |
| State.Sig.TrigMask will indicate the bits set within TXMASKI at |
| the time of the handler call that have all been cleared to prevent |
| nested interrupt occuring immediately. |
| |
| State.Sig.SaveMask is a bit-mask which will be set to Zero when a trigger |
| occurs at background level and TBICTX_CRIT_BIT and optionally |
| TBICTX_CBUF_BIT when a trigger occurs at interrupt level. |
| |
| TBICTX_CBUF_BIT reflects the state of TXSTATUS_CBMARKER_BIT for |
| the interrupted background thread. |
| |
| State.Sig.pCtx will point at a TBICTX structure generated to hold the |
| critical state of the interrupted thread at interrupt level and |
| should be set to NULL when called at background level. |
| |
| Triggers will indicate the status of TXSTAT or TXSTATI sampled by the |
| code that called the handler. |
| |
| Inst is defined as 'Inst' if the SigNum is TBID_SIGNUM_SWx and holds the |
| actual SWITCH instruction detected, in other cases the value of this |
| parameter is undefined. |
| |
| pTBI points at the PTBI structure related to the thread and processing |
| level involved. |
| |
| TBIRES return value at both processing levels is similar in terms of any |
| changes that the handler makes. By default the State argument value |
| passed in should be returned. |
| |
| Sig.TrigMask value is bits to OR back into TXMASKI when the handler |
| completes to enable currently disabled interrupts. |
| |
| Sig.SaveMask value is ignored. |
| |
| Sig.pCtx is ignored. |
| |
| */ |
| typedef TBIRES (*PTBIAPIFN)( TBIRES State, int SigNum, |
| int Triggers, int Inst, |
| volatile struct _tbi_tag_ *pTBI ); |
| #endif /* ifndef __ASSEMBLY__ */ |
| |
| #ifndef __ASSEMBLY__ |
| /* The global memory map is described by a list of segment descriptors */ |
| typedef volatile struct _tbiseg_tag_ { |
| volatile struct _tbiseg_tag_ *pLink; |
| int Id; /* Id of the segment */ |
| TBISPIN Lock; /* Spin-lock for struct (normally 0) */ |
| unsigned int Bytes; /* Size of region in bytes */ |
| void *pGAddr; /* Base addr of region in global space */ |
| void *pLAddr; /* Base addr of region in local space */ |
| int Data[2]; /* Segment specific data (may be extended) */ |
| |
| } TBISEG, *PTBISEG; |
| #endif /* ifndef __ASSEMBLY__ */ |
| |
| /* Offsets of fields in TBISEG structure */ |
| #define TBISEG_pLink ( 0) |
| #define TBISEG_Id ( 4) |
| #define TBISEG_Lock ( 8) |
| #define TBISEG_Bytes (12) |
| #define TBISEG_pGAddr (16) |
| #define TBISEG_pLAddr (20) |
| #define TBISEG_Data (24) |
| |
| #ifndef __ASSEMBLY__ |
| typedef volatile struct _tbi_tag_ { |
| int SigMask; /* Bits set to represent S/W events */ |
| PTBIKICK pKick; /* Kick addr for S/W events */ |
| void *pCCB; /* Extended S/W events */ |
| PTBISEG pSeg; /* Related segment structure */ |
| PTBIAPIFN fnSigs[TBID_SIGNUM_MAX+1];/* Signal handler API table */ |
| } *PTBI, TBI; |
| #endif /* ifndef __ASSEMBLY__ */ |
| |
| /* Byte offsets of fields within TBI */ |
| #define TBI_SigMask (0) |
| #define TBI_pKick (4) |
| #define TBI_pCCB (8) |
| #define TBI_pSeg (12) |
| #define TBI_fnSigs (16) |
| |
| #ifdef TBI_1_4 |
| #ifndef __ASSEMBLY__ |
| /* This handler should be used for TBID_SIGNUM_DFR */ |
| extern TBIRES __TBIHandleDFR ( TBIRES State, int SigNum, |
| int Triggers, int Inst, |
| volatile struct _tbi_tag_ *pTBI ); |
| #endif |
| #endif |
| |
| /* String table entry - special values */ |
| #define METAG_TBI_STRS (0x5300) /* Tag : If entry is valid */ |
| #define METAG_TBI_STRE (0x4500) /* Tag : If entry is end of table */ |
| #define METAG_TBI_STRG (0x4700) /* Tag : If entry is a gap */ |
| #define METAG_TBI_STRX (0x5A00) /* TransLen : If no translation present */ |
| |
| #ifndef __ASSEMBLY__ |
| typedef volatile struct _tbistr_tag_ { |
| short Bytes; /* Length of entry in Bytes */ |
| short Tag; /* Normally METAG_TBI_STRS(0x5300) */ |
| short Len; /* Length of the string entry (incl null) */ |
| short TransLen; /* Normally METAG_TBI_STRX(0x5A00) */ |
| char String[8]; /* Zero terminated (may-be bigger) */ |
| |
| } TBISTR, *PTBISTR; |
| #endif /* ifndef __ASSEMBLY__ */ |
| |
| /* Cache size information - available as fields of Data[1] of global heap |
| segment */ |
| #define METAG_TBI_ICACHE_SIZE_S 0 /* see comments below */ |
| #define METAG_TBI_ICACHE_SIZE_BITS 0x0000000F |
| #define METAG_TBI_ICACHE_FILL_S 4 |
| #define METAG_TBI_ICACHE_FILL_BITS 0x000000F0 |
| #define METAG_TBI_DCACHE_SIZE_S 8 |
| #define METAG_TBI_DCACHE_SIZE_BITS 0x00000F00 |
| #define METAG_TBI_DCACHE_FILL_S 12 |
| #define METAG_TBI_DCACHE_FILL_BITS 0x0000F000 |
| |
| /* METAG_TBI_xCACHE_SIZE |
| Describes the physical cache size rounded up to the next power of 2 |
| relative to a 16K (2^14) cache. These sizes are encoded as a signed addend |
| to this base power of 2, for example |
| 4K -> 2^12 -> -2 (i.e. 12-14) |
| 8K -> 2^13 -> -1 |
| 16K -> 2^14 -> 0 |
| 32K -> 2^15 -> +1 |
| 64K -> 2^16 -> +2 |
| 128K -> 2^17 -> +3 |
| |
| METAG_TBI_xCACHE_FILL |
| Describes the physical cache size within the power of 2 area given by |
| the value above. For example a 10K cache may be represented as having |
| nearest size 16K with a fill of 10 sixteenths. This is encoded as the |
| number of unused 1/16ths, for example |
| 0000 -> 0 -> 16/16 |
| 0001 -> 1 -> 15/16 |
| 0010 -> 2 -> 14/16 |
| ... |
| 1111 -> 15 -> 1/16 |
| */ |
| |
| #define METAG_TBI_CACHE_SIZE_BASE_LOG2 14 |
| |
| /* Each declaration made by this macro generates a TBISTR entry */ |
| #ifndef __ASSEMBLY__ |
| #define TBISTR_DECL( Name, Str ) \ |
| __attribute__ ((__section__ (".tbistr") )) const char Name[] = #Str |
| #endif |
| |
| /* META timer values - see below for Timer support routines */ |
| #define TBI_TIMERWAIT_MIN (-16) /* Minimum 'recommended' period */ |
| #define TBI_TIMERWAIT_MAX (-0x7FFFFFFF) /* Maximum 'recommended' period */ |
| |
| #ifndef __ASSEMBLY__ |
| /* These macros allow direct access from C to any register known to the |
| assembler or defined in machine.h. Example candidates are TXTACTCYC, |
| TXIDLECYC, and TXPRIVEXT. Note that when higher level macros and routines |
| like the timer and trigger handling features below these should be used in |
| preference to this direct low-level access mechanism. */ |
| #define TBI_GETREG( Reg ) __extension__ ({\ |
| int __GRValue; \ |
| __asm__ volatile ("MOV\t%0," #Reg "\t/* (*TBI_GETREG OK) */" : \ |
| "=r" (__GRValue) ); \ |
| __GRValue; }) |
| |
| #define TBI_SETREG( Reg, Value ) do {\ |
| int __SRValue = Value; \ |
| __asm__ volatile ("MOV\t" #Reg ",%0\t/* (*TBI_SETREG OK) */" : \ |
| : "r" (__SRValue) ); } while (0) |
| |
| #define TBI_SWAPREG( Reg, Value ) do {\ |
| int __XRValue = (Value); \ |
| __asm__ volatile ("SWAP\t" #Reg ",%0\t/* (*TBI_SWAPREG OK) */" : \ |
| "=r" (__XRValue) : "0" (__XRValue) ); \ |
| Value = __XRValue; } while (0) |
| |
| /* Obtain and/or release global critical section lock given that interrupts |
| are already disabled and/or should remain disabled. */ |
| #define TBI_NOINTSCRITON do {\ |
| __asm__ volatile ("LOCK1\t\t/* (*TBI_NOINTSCRITON OK) */");} while (0) |
| #define TBI_NOINTSCRITOFF do {\ |
| __asm__ volatile ("LOCK0\t\t/* (*TBI_NOINTSCRITOFF OK) */");} while (0) |
| /* Optimised in-lining versions of the above macros */ |
| |
| #define TBI_LOCK( TrigState ) do {\ |
| int __TRValue; \ |
| int __ALOCKHI = LINSYSEVENT_WR_ATOMIC_LOCK & 0xFFFF0000; \ |
| __asm__ volatile ("MOV %0,#0\t\t/* (*TBI_LOCK ... */\n\t" \ |
| "SWAP\t%0,TXMASKI\t/* ... */\n\t" \ |
| "LOCK2\t\t/* ... */\n\t" \ |
| "SETD\t[%1+#0x40],D1RtP /* ... OK) */" : \ |
| "=r&" (__TRValue) : "u" (__ALOCKHI) ); \ |
| TrigState = __TRValue; } while (0) |
| #define TBI_CRITON( TrigState ) do {\ |
| int __TRValue; \ |
| __asm__ volatile ("MOV %0,#0\t\t/* (*TBI_CRITON ... */\n\t" \ |
| "SWAP\t%0,TXMASKI\t/* ... */\n\t" \ |
| "LOCK1\t\t/* ... OK) */" : \ |
| "=r" (__TRValue) ); \ |
| TrigState = __TRValue; } while (0) |
| |
| #define TBI_INTSX( TrigState ) do {\ |
| int __TRValue = TrigState; \ |
| __asm__ volatile ("SWAP\t%0,TXMASKI\t/* (*TBI_INTSX OK) */" : \ |
| "=r" (__TRValue) : "0" (__TRValue) ); \ |
| TrigState = __TRValue; } while (0) |
| |
| #define TBI_UNLOCK( TrigState ) do {\ |
| int __TRValue = TrigState; \ |
| int __ALOCKHI = LINSYSEVENT_WR_ATOMIC_LOCK & 0xFFFF0000; \ |
| __asm__ volatile ("SETD\t[%1+#0x00],D1RtP\t/* (*TBI_UNLOCK ... */\n\t" \ |
| "LOCK0\t\t/* ... */\n\t" \ |
| "MOV\tTXMASKI,%0\t/* ... OK) */" : \ |
| : "r" (__TRValue), "u" (__ALOCKHI) ); } while (0) |
| |
| #define TBI_CRITOFF( TrigState ) do {\ |
| int __TRValue = TrigState; \ |
| __asm__ volatile ("LOCK0\t\t/* (*TBI_CRITOFF ... */\n\t" \ |
| "MOV\tTXMASKI,%0\t/* ... OK) */" : \ |
| : "r" (__TRValue) ); } while (0) |
| |
| #define TBI_TRIGSX( SrcDst ) do { TBI_SWAPREG( TXMASK, SrcDst );} while (0) |
| |
| /* Composite macros to perform logic ops on INTS or TRIGS masks */ |
| #define TBI_INTSOR( Bits ) do {\ |
| int __TT = 0; TBI_INTSX(__TT); \ |
| __TT |= (Bits); TBI_INTSX(__TT); } while (0) |
| |
| #define TBI_INTSAND( Bits ) do {\ |
| int __TT = 0; TBI_INTSX(__TT); \ |
| __TT &= (Bits); TBI_INTSX(__TT); } while (0) |
| |
| #ifdef TBI_1_4 |
| #define TBI_DEFRICTRLSOR( Bits ) do {\ |
| int __TT = TBI_GETREG( CT.20 ); \ |
| __TT |= (Bits); TBI_SETREG( CT.20, __TT); } while (0) |
| |
| #define TBI_DEFRICTRLSAND( Bits ) do {\ |
| int __TT = TBI_GETREG( TXDEFR ); \ |
| __TT &= (Bits); TBI_SETREG( CT.20, __TT); } while (0) |
| #endif |
| |
| #define TBI_TRIGSOR( Bits ) do {\ |
| int __TT = TBI_GETREG( TXMASK ); \ |
| __TT |= (Bits); TBI_SETREG( TXMASK, __TT); } while (0) |
| |
| #define TBI_TRIGSAND( Bits ) do {\ |
| int __TT = TBI_GETREG( TXMASK ); \ |
| __TT &= (Bits); TBI_SETREG( TXMASK, __TT); } while (0) |
| |
| /* Macros to disable and re-enable interrupts using TBI_INTSX, deliberate |
| traps and exceptions can still be handled within the critical section. */ |
| #define TBI_STOPINTS( Value ) do {\ |
| int __TT = TBI_GETREG( TXMASKI ); \ |
| __TT &= TXSTATI_BGNDHALT_BIT; TBI_INTSX( __TT ); \ |
| Value = __TT; } while (0) |
| #define TBI_RESTINTS( Value ) do {\ |
| int __TT = Value; TBI_INTSX( __TT ); } while (0) |
| |
| /* Return pointer to segment list at current privilege level */ |
| PTBISEG __TBISegList( void ); |
| |
| /* Search the segment list for a match given Id, pStart can be NULL */ |
| PTBISEG __TBIFindSeg( PTBISEG pStart, int Id ); |
| |
| /* Prepare a new segment structure using space from within another */ |
| PTBISEG __TBINewSeg( PTBISEG pFromSeg, int Id, unsigned int Bytes ); |
| |
| /* Prepare a new segment using any global or local heap segments available */ |
| PTBISEG __TBIMakeNewSeg( int Id, unsigned int Bytes ); |
| |
| /* Insert a new segment into the segment list so __TBIFindSeg can locate it */ |
| void __TBIAddSeg( PTBISEG pSeg ); |
| #define __TBIADDSEG_DEF /* Some versions failed to define this */ |
| |
| /* Return Id of current thread; TBID_ISTAT_BIT+TBID_THREAD_BITS */ |
| int __TBIThreadId( void ); |
| |
| /* Return TBIRES.Thrd data for current thread */ |
| TBIRES __TBIThrdPrivId( void ); |
| |
| /* Return pointer to current threads TBI root block. |
| Id implies whether Int or Background root block is required */ |
| PTBI __TBI( int Id ); |
| |
| /* Try to set Mask bit using the spin-lock protocol, return 0 if fails and |
| new state if succeeds */ |
| int __TBIPoll( PTBISPIN pLock, int Mask ); |
| |
| /* Set Mask bits via the spin-lock protocol in *pLock, return new state */ |
| int __TBISpin( PTBISPIN pLock, int Mask ); |
| |
| /* Default handler set up for all TBI.fnSigs entries during initialisation */ |
| TBIRES __TBIUnExpXXX( TBIRES State, int SigNum, |
| int Triggers, int Inst, PTBI pTBI ); |
| |
| /* Call this routine to service triggers at background processing level. The |
| TBID_POLL_BIT of the Id parameter value will be used to indicate that the |
| routine should return if no triggers need to be serviced initially. If this |
| bit is not set the routine will block until one trigger handler is serviced |
| and then behave like the poll case servicing any remaining triggers |
| actually outstanding before returning. Normally the State parameter should |
| be simply initialised to zero and the result should be ignored, other |
| values/options are for internal use only. */ |
| TBIRES __TBISyncTrigger( TBIRES State, int Id ); |
| |
| /* Call this routine to enable processing of triggers by signal handlers at |
| interrupt level. The State parameter value passed is returned by this |
| routine. The State.Sig.TrigMask field also specifies the initial |
| state of the interrupt mask register TXMASKI to be setup by the call. |
| The other parts of the State parameter are ignored unless the PRIV bit is |
| set in the SaveMask field. In this case the State.Sig.pCtx field specifies |
| the base of the stack to which the interrupt system should switch into |
| as it saves the state of the previously executing code. In the case the |
| thread will be unprivileged as it continues execution at the return |
| point of this routine and it's future state will be effectively never |
| trusted to be valid. */ |
| TBIRES __TBIASyncTrigger( TBIRES State ); |
| |
| /* Call this to swap soft threads executing at the background processing level. |
| The TBIRES returned to the new thread will be the same as the NextThread |
| value specified to the call. The NextThread.Switch.pCtx value specifies |
| which thread context to restore and the NextThread.Switch.Para value can |
| hold an arbitrary expression to be passed between the threads. The saved |
| state of the previous thread will be stored in a TBICTX descriptor created |
| on it's stack and the address of this will be stored into the *rpSaveCtx |
| location specified. */ |
| TBIRES __TBISwitch( TBIRES NextThread, PTBICTX *rpSaveCtx ); |
| |
| /* Call this to initialise a stack frame ready for further use, up to four |
| 32-bit arguments may be specified after the fixed args to be passed via |
| the new stack pStack to the routine specified via fnMain. If the |
| main-line routine ever returns the thread will operate as if main itself |
| had returned and terminate with the return code given. */ |
| typedef int (*PTBIMAINFN)( TBIRES Arg /*, <= 4 additional 32-bit args */ ); |
| PTBICTX __TBISwitchInit( void *pStack, PTBIMAINFN fnMain, ... ); |
| |
| /* Call this to resume a thread from a saved synchronous TBICTX state. |
| The TBIRES returned to the new thread will be the same as the NextThread |
| value specified to the call. The NextThread.Switch.pCtx value specifies |
| which thread context to restore and the NextThread.Switch.Para value can |
| hold an arbitrary expression to be passed between the threads. The context |
| of the calling thread is lost and this routine never returns to the |
| caller. The TrigsMask value supplied is ored into TXMASKI to enable |
| interrupts after the context of the new thread is established. */ |
| void __TBISyncResume( TBIRES NextThread, int TrigsMask ); |
| |
| /* Call these routines to save and restore the extended states of |
| scheduled tasks. */ |
| void *__TBICtxSave( TBIRES State, void *pExt ); |
| void *__TBICtxRestore( TBIRES State, void *pExt ); |
| |
| #ifdef TBI_1_4 |
| #ifdef TBI_FASTINT_1_4 |
| /* Call these routines to copy the GP state to a separate buffer |
| * Only necessary for context switching. |
| */ |
| PTBICTXGP __TBICtx2SaveCrit( PTBICTX2 pCurrentCtx, PTBICTX2 pSaveCtx ); |
| void *__TBICtx2SaveGP( PTBICTXGP pCurrentCtxGP, PTBICTXGP pSaveCtxGP ); |
| |
| /* Call these routines to save and restore the extended states of |
| scheduled tasks. */ |
| void *__TBICtx2Save( PTBICTXGP pCtxGP, short SaveMask, void *pExt ); |
| void *__TBICtx2Restore( PTBICTX2 pCtx, short SaveMask, void *pExt ); |
| #endif |
| |
| /* If FPAC flag is set then significant FPU context exists. Call these routine |
| to save and restore it */ |
| void *__TBICtxFPUSave( TBIRES State, void *pExt ); |
| void *__TBICtxFPURestore( TBIRES State, void *pExt ); |
| |
| #ifdef TBI_FASTINT_1_4 |
| extern void *__TBICtx2FPUSave (PTBICTXGP, short, void*); |
| extern void *__TBICtx2FPURestore (PTBICTXGP, short, void*); |
| #endif |
| #endif |
| |
| #ifdef TBI_1_4 |
| /* Call these routines to save and restore DSPRAM. */ |
| void *__TBIDspramSaveA (short DspramSizes, void *pExt); |
| void *__TBIDspramSaveB (short DspramSizes, void *pExt); |
| void *__TBIDspramRestoreA (short DspramSizes, void *pExt); |
| void *__TBIDspramRestoreB (short DspramSizes, void *pExt); |
| #endif |
| |
| /* This routine should be used at the entrypoint of interrupt handlers to |
| re-enable higher priority interrupts and/or save state from the previously |
| executing background code. State is a TBIRES.Sig parameter with NoNestMask |
| indicating the triggers (if any) that should remain disabled and SaveMask |
| CBUF bit indicating the if the hardware catch buffer is dirty. Optionally |
| any number of extended state bits X??? including XCBF can be specified to |
| force a nested state save call to __TBICtxSave before the current routine |
| continues. (In the latter case __TBICtxRestore should be called to restore |
| any extended states before the background thread of execution is resumed) |
| |
| By default (no X??? bits specified in SaveMask) this routine performs a |
| sub-call to __TBICtxSave with the pExt and State parameters specified IF |
| some triggers could be serviced while the current interrupt handler |
| executes and the hardware catch buffer is actually dirty. In this case |
| this routine provides the XCBF bit in State.Sig.SaveMask to force the |
| __TBICtxSave to extract the current catch state. |
| |
| The NoNestMask parameter should normally indicate that the same or lower |
| triggers than those provoking the current handler call should not be |
| serviced in nested calls, zero may be specified if all possible interrupts |
| are to be allowed. |
| |
| The TBIRES.Sig value returned will be similar to the State parameter |
| specified with the XCBF bit ORed into it's SaveMask if a context save was |
| required and fewer bits set in it's TrigMask corresponding to the same/lower |
| priority interrupt triggers still not enabled. */ |
| TBIRES __TBINestInts( TBIRES State, void *pExt, int NoNestMask ); |
| |
| /* This routine causes the TBICTX structure specified in State.Sig.pCtx to |
| be restored. This implies that execution will not return to the caller. |
| The State.Sig.TrigMask field will be restored during the context switch |
| such that any immediately occuring interrupts occur in the context of the |
| newly specified task. The State.Sig.SaveMask parameter is ignored. */ |
| void __TBIASyncResume( TBIRES State ); |
| |
| /* Call this routine to enable fastest possible processing of one or more |
| interrupt triggers via a unified signal handler. The handler concerned |
| must simple return after servicing the related hardware. |
| The State.Sig.TrigMask parameter indicates the interrupt triggers to be |
| enabled and the Thin.Thin.fnHandler specifies the routine to call and |
| the whole Thin parameter value will be passed to this routine unaltered as |
| it's first parameter. */ |
| void __TBIASyncThin( TBIRES State, TBIRES Thin ); |
| |
| /* Do this before performing your own direct spin-lock access - use TBI_LOCK */ |
| int __TBILock( void ); |
| |
| /* Do this after performing your own direct spin-lock access - use TBI_UNLOCK */ |
| void __TBIUnlock( int TrigState ); |
| |
| /* Obtain and release global critical section lock - only stops execution |
| of interrupts on this thread and similar critical section code on other |
| local threads - use TBI_CRITON or TBI_CRITOFF */ |
| int __TBICritOn( void ); |
| void __TBICritOff( int TrigState ); |
| |
| /* Change INTS (TXMASKI) - return old state - use TBI_INTSX */ |
| int __TBIIntsX( int NewMask ); |
| |
| /* Change TRIGS (TXMASK) - return old state - use TBI_TRIGSX */ |
| int __TBITrigsX( int NewMask ); |
| |
| /* This function initialises a timer for first use, only the TBID_ISTAT_BIT |
| of the Id parameter is used to indicate which timer is to be modified. The |
| Wait value should either be zero to disable the timer concerned or be in |
| the recommended TBI_TIMERWAIT_* range to specify the delay required before |
| the first timer trigger occurs. |
| |
| The TBID_ISTAT_BIT of the Id parameter similar effects all other timer |
| support functions (see below). */ |
| void __TBITimerCtrl( int Id, int Wait ); |
| |
| /* This routine returns a 64-bit time stamp value that is initialised to zero |
| via a __TBITimerCtrl timer enabling call. */ |
| long long __TBITimeStamp( int Id ); |
| |
| /* To manage a periodic timer each period elapsed should be subracted from |
| the current timer value to attempt to set up the next timer trigger. The |
| Wait parameter should be a value in the recommended TBI_TIMERWAIT_* range. |
| The return value is the new aggregate value that the timer was updated to, |
| if this is less than zero then a timer trigger is guaranteed to be |
| generated after the number of ticks implied, if a positive result is |
| returned either itterative or step-wise corrective action must be taken to |
| resynchronise the timer and hence provoke a future timer trigger. */ |
| int __TBITimerAdd( int Id, int Wait ); |
| |
| /* String table search function, pStart is first entry to check or NULL, |
| pStr is string data to search for and MatchLen is either length of string |
| to compare for an exact match or negative length to compare for partial |
| match. */ |
| const TBISTR *__TBIFindStr( const TBISTR *pStart, |
| const char *pStr, int MatchLen ); |
| |
| /* String table translate function, pStr is text to translate and Len is |
| it's length. Value returned may not be a string pointer if the |
| translation value is really some other type, 64-bit alignment of the return |
| pointer is guaranteed so almost any type including a structure could be |
| located with this routine. */ |
| const void *__TBITransStr( const char *pStr, int Len ); |
| |
| |
| |
| /* Arbitrary physical memory access windows, use different Channels to avoid |
| conflict/thrashing within a single piece of code. */ |
| void *__TBIPhysAccess( int Channel, int PhysAddr, int Bytes ); |
| void __TBIPhysRelease( int Channel, void *pLinAddr ); |
| |
| #ifdef METAC_1_0 |
| /* Data cache function nullified because data cache is off */ |
| #define TBIDCACHE_FLUSH( pAddr ) |
| #define TBIDCACHE_PRELOAD( Type, pAddr ) ((Type) (pAddr)) |
| #define TBIDCACHE_REFRESH( Type, pAddr ) ((Type) (pAddr)) |
| #endif |
| #ifdef METAC_1_1 |
| /* To flush a single cache line from the data cache using a linear address */ |
| #define TBIDCACHE_FLUSH( pAddr ) ((volatile char *) \ |
| (((unsigned int) (pAddr))>>LINSYSLFLUSH_S))[0] = 0 |
| |
| extern void * __builtin_dcache_preload (void *); |
| |
| /* Try to ensure that the data at the address concerned is in the cache */ |
| #define TBIDCACHE_PRELOAD( Type, Addr ) \ |
| ((Type) __builtin_dcache_preload ((void *)(Addr))) |
| |
| extern void * __builtin_dcache_refresh (void *); |
| |
| /* Flush any old version of data from address and re-load a new copy */ |
| #define TBIDCACHE_REFRESH( Type, Addr ) __extension__ ({ \ |
| Type __addr = (Type)(Addr); \ |
| (void)__builtin_dcache_refresh ((void *)(((unsigned int)(__addr))>>6)); \ |
| __addr; }) |
| |
| #endif |
| #ifndef METAC_1_0 |
| #ifndef METAC_1_1 |
| /* Support for DCACHE builtin */ |
| extern void __builtin_dcache_flush (void *); |
| |
| /* To flush a single cache line from the data cache using a linear address */ |
| #define TBIDCACHE_FLUSH( Addr ) \ |
| __builtin_dcache_flush ((void *)(Addr)) |
| |
| extern void * __builtin_dcache_preload (void *); |
| |
| /* Try to ensure that the data at the address concerned is in the cache */ |
| #define TBIDCACHE_PRELOAD( Type, Addr ) \ |
| ((Type) __builtin_dcache_preload ((void *)(Addr))) |
| |
| extern void * __builtin_dcache_refresh (void *); |
| |
| /* Flush any old version of data from address and re-load a new copy */ |
| #define TBIDCACHE_REFRESH( Type, Addr ) \ |
| ((Type) __builtin_dcache_refresh ((void *)(Addr))) |
| |
| #endif |
| #endif |
| |
| /* Flush the MMCU cache */ |
| #define TBIMCACHE_FLUSH() { ((volatile int *) LINSYSCFLUSH_MMCU)[0] = 0; } |
| |
| #ifdef METAC_2_1 |
| /* Obtain the MMU table entry for the specified address */ |
| #define TBIMTABLE_LEAFDATA(ADDR) TBIXCACHE_RD((int)(ADDR) & (-1<<6)) |
| |
| #ifndef __ASSEMBLY__ |
| /* Obtain the full MMU table entry for the specified address */ |
| #define TBIMTABLE_DATA(ADDR) __extension__ ({ TBIRES __p; \ |
| __p.Val = TBIXCACHE_RL((int)(ADDR) & (-1<<6)); \ |
| __p; }) |
| #endif |
| #endif |
| |
| /* Combine a physical base address, and a linear address |
| * Internal use only |
| */ |
| #define _TBIMTABLE_LIN2PHYS(PHYS, LIN, LMASK) (void*)(((int)(PHYS)&0xFFFFF000)\ |
| +((int)(LIN)&(LMASK))) |
| |
| /* Convert a linear to a physical address */ |
| #define TBIMTABLE_LIN2PHYS(LEAFDATA, ADDR) \ |
| (((LEAFDATA) & CRLINPHY0_VAL_BIT) \ |
| ? _TBIMTABLE_LIN2PHYS(LEAFDATA, ADDR, 0x00000FFF) \ |
| : 0) |
| |
| /* Debug support - using external debugger or host */ |
| void __TBIDumpSegListEntries( void ); |
| void __TBILogF( const char *pFmt, ... ); |
| void __TBIAssert( const char *pFile, int LineNum, const char *pExp ); |
| void __TBICont( const char *pMsg, ... ); /* TBIAssert -> 'wait for continue' */ |
| |
| /* Array of signal name data for debug messages */ |
| extern const char __TBISigNames[]; |
| #endif /* ifndef __ASSEMBLY__ */ |
| |
| |
| |
| /* Scale of sub-strings in the __TBISigNames string list */ |
| #define TBI_SIGNAME_SCALE 4 |
| #define TBI_SIGNAME_SCALE_S 2 |
| |
| #define TBI_1_3 |
| |
| #ifdef TBI_1_3 |
| |
| #ifndef __ASSEMBLY__ |
| #define TBIXCACHE_RD(ADDR) __extension__ ({\ |
| void * __Addr = (void *)(ADDR); \ |
| int __Data; \ |
| __asm__ volatile ( "CACHERD\t%0,[%1+#0]" : \ |
| "=r" (__Data) : "r" (__Addr) ); \ |
| __Data; }) |
| |
| #define TBIXCACHE_RL(ADDR) __extension__ ({\ |
| void * __Addr = (void *)(ADDR); \ |
| long long __Data; \ |
| __asm__ volatile ( "CACHERL\t%0,%t0,[%1+#0]" : \ |
| "=d" (__Data) : "r" (__Addr) ); \ |
| __Data; }) |
| |
| #define TBIXCACHE_WD(ADDR, DATA) do {\ |
| void * __Addr = (void *)(ADDR); \ |
| int __Data = DATA; \ |
| __asm__ volatile ( "CACHEWD\t[%0+#0],%1" : \ |
| : "r" (__Addr), "r" (__Data) ); } while(0) |
| |
| #define TBIXCACHE_WL(ADDR, DATA) do {\ |
| void * __Addr = (void *)(ADDR); \ |
| long long __Data = DATA; \ |
| __asm__ volatile ( "CACHEWL\t[%0+#0],%1,%t1" : \ |
| : "r" (__Addr), "r" (__Data) ); } while(0) |
| |
| #ifdef TBI_4_0 |
| |
| #define TBICACHE_FLUSH_L1D_L2(ADDR) \ |
| TBIXCACHE_WD(ADDR, CACHEW_FLUSH_L1D_L2) |
| #define TBICACHE_WRITEBACK_L1D_L2(ADDR) \ |
| TBIXCACHE_WD(ADDR, CACHEW_WRITEBACK_L1D_L2) |
| #define TBICACHE_INVALIDATE_L1D(ADDR) \ |
| TBIXCACHE_WD(ADDR, CACHEW_INVALIDATE_L1D) |
| #define TBICACHE_INVALIDATE_L1D_L2(ADDR) \ |
| TBIXCACHE_WD(ADDR, CACHEW_INVALIDATE_L1D_L2) |
| #define TBICACHE_INVALIDATE_L1DTLB(ADDR) \ |
| TBIXCACHE_WD(ADDR, CACHEW_INVALIDATE_L1DTLB) |
| #define TBICACHE_INVALIDATE_L1I(ADDR) \ |
| TBIXCACHE_WD(ADDR, CACHEW_INVALIDATE_L1I) |
| #define TBICACHE_INVALIDATE_L1ITLB(ADDR) \ |
| TBIXCACHE_WD(ADDR, CACHEW_INVALIDATE_L1ITLB) |
| |
| #endif /* TBI_4_0 */ |
| #endif /* ifndef __ASSEMBLY__ */ |
| |
| /* |
| * Calculate linear PC value from real PC and Minim mode control, the LSB of |
| * the result returned indicates if address compression has occured. |
| */ |
| #ifndef __ASSEMBLY__ |
| #define METAG_LINPC( PCVal ) (\ |
| ( (TBI_GETREG(TXPRIVEXT) & TXPRIVEXT_MINIMON_BIT) != 0 ) ? ( \ |
| ( ((PCVal) & 0x00900000) == 0x00900000 ) ? \ |
| (((PCVal) & 0xFFE00000) + (((PCVal) & 0x001FFFFC)>>1) + 1) : \ |
| ( ((PCVal) & 0x00800000) == 0x00000000 ) ? \ |
| (((PCVal) & 0xFF800000) + (((PCVal) & 0x007FFFFC)>>1) + 1) : \ |
| (PCVal) ) \ |
| : (PCVal) ) |
| #define METAG_LINPC_X2BIT 0x00000001 /* Make (Size>>1) if compressed */ |
| |
| /* Convert an arbitrary Linear address into a valid Minim PC or return 0 */ |
| #define METAG_PCMINIM( LinVal ) (\ |
| (((LinVal) & 0x00980000) == 0x00880000) ? \ |
| (((LinVal) & 0xFFE00000) + (((LinVal) & 0x000FFFFE)<<1)) : \ |
| (((LinVal) & 0x00C00000) == 0x00000000) ? \ |
| (((LinVal) & 0xFF800000) + (((LinVal) & 0x003FFFFE)<<1)) : 0 ) |
| |
| /* Reverse a METAG_LINPC conversion step to return the original PCVal */ |
| #define METAG_PCLIN( LinVal ) ( 0xFFFFFFFC & (\ |
| ( (LinVal & METAG_LINPC_X2BIT) != 0 ) ? METAG_PCMINIM( LinVal ) : \ |
| (LinVal) )) |
| |
| /* |
| * Flush the MMCU Table cache privately for each thread. On cores that do not |
| * support per-thread flushing it will flush all threads mapping data. |
| */ |
| #define TBIMCACHE_TFLUSH(Thread) do {\ |
| ((volatile int *)( LINSYSCFLUSH_TxMMCU_BASE + \ |
| (LINSYSCFLUSH_TxMMCU_STRIDE*(Thread)) ))[0] = 0; \ |
| } while(0) |
| |
| /* |
| * To flush a single linear-matched cache line from the code cache. In |
| * cases where Minim is possible the METAC_LINPC operation must be used |
| * to pre-process the address being flushed. |
| */ |
| #define TBIICACHE_FLUSH( pAddr ) TBIXCACHE_WD (pAddr, CACHEW_ICACHE_BIT) |
| |
| /* To flush a single linear-matched mapping from code/data MMU table cache */ |
| #define TBIMCACHE_AFLUSH( pAddr, SegType ) \ |
| TBIXCACHE_WD(pAddr, CACHEW_TLBFLUSH_BIT + ( \ |
| ((SegType) == TBID_SEGTYPE_TEXT) ? CACHEW_ICACHE_BIT : 0 )) |
| |
| /* |
| * To flush translation data corresponding to a range of addresses without |
| * using TBITCACHE_FLUSH to flush all of this threads translation data. It |
| * is necessary to know what stride (>= 4K) must be used to flush a specific |
| * region. |
| * |
| * For example direct mapped regions use the maximum page size (512K) which may |
| * mean that only one flush is needed to cover the sub-set of the direct |
| * mapped area used since it was setup. |
| * |
| * The function returns the stride on which flushes should be performed. |
| * |
| * If 0 is returned then the region is not subject to MMU caching, if -1 is |
| * returned then this indicates that only TBIMCACHE_TFLUSH can be used to |
| * flush the region concerned rather than TBIMCACHE_AFLUSH which this |
| * function is designed to support. |
| */ |
| int __TBIMMUCacheStride( const void *pStart, int Bytes ); |
| |
| /* |
| * This function will use the above lower level functions to achieve a MMU |
| * table data flush in an optimal a fashion as possible. On a system that |
| * supports linear address based caching this function will also call the |
| * code or data cache flush functions to maintain address/data coherency. |
| * |
| * SegType should be TBID_SEGTYPE_TEXT if the address range is for code or |
| * any other value such as TBID_SEGTYPE_DATA for data. If an area is |
| * used in both ways then call this function twice; once for each. |
| */ |
| void __TBIMMUCacheFlush( const void *pStart, int Bytes, int SegType ); |
| |
| /* |
| * Cached Core mode setup and flush functions allow one code and one data |
| * region of the corresponding global or local cache partion size to be |
| * locked into the corresponding cache memory. This prevents normal LRU |
| * logic discarding the code or data and avoids write-thru bandwidth in |
| * data areas. Code mappings are selected by specifying TBID_SEGTYPE_TEXT |
| * for SegType, otherwise data mappings are created. |
| * |
| * Mode supplied should always contain the VALID bit and WINx selection data. |
| * Data areas will be mapped read-only if the WRITE bit is not added. |
| * |
| * The address returned by the Opt function will either be the same as that |
| * passed in (if optimisation cannot be supported) or the base of the new core |
| * cached region in linear address space. The returned address must be passed |
| * into the End function to remove the mapping when required. If a non-core |
| * cached memory address is passed into it the End function has no effect. |
| * Note that the region accessed MUST be flushed from the appropriate cache |
| * before the End function is called to deliver correct operation. |
| */ |
| void *__TBICoreCacheOpt( const void *pStart, int Bytes, int SegType, int Mode ); |
| void __TBICoreCacheEnd( const void *pOpt, int Bytes, int SegType ); |
| |
| /* |
| * Optimise physical access channel and flush side effects before releasing |
| * the channel. If pStart is NULL the whole region must be flushed and this is |
| * done automatically by the channel release function if optimisation is |
| * enabled. Flushing the specific region that may have been accessed before |
| * release should optimises this process. On physically cached systems we do |
| * not flush the code/data caches only the MMU table data needs flushing. |
| */ |
| void __TBIPhysOptim( int Channel, int IMode, int DMode ); |
| void __TBIPhysFlush( int Channel, const void *pStart, int Bytes ); |
| #endif |
| #endif /* ifdef TBI_1_3 */ |
| |
| #endif /* _ASM_METAG_TBX_H_ */ |
