blob: f5ef697022962fe7d95117cc44a43b662d40233c [file] [log] [blame]
/*
* linux/arch/arm/mach-aaec2000/aaed2000.c
*
* Support for the Agilent AAED-2000 Development Platform.
*
* Copyright (c) 2005 Nicolas Bellido Y Ortega
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/major.h>
#include <linux/interrupt.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/aaed2000.h>
#include "core.h"
static void aaed2000_clcd_disable(struct clcd_fb *fb)
{
AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
}
static void aaed2000_clcd_enable(struct clcd_fb *fb)
{
AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
}
struct aaec2000_clcd_info clcd_info = {
.enable = aaed2000_clcd_enable,
.disable = aaed2000_clcd_disable,
.panel = {
.mode = {
.name = "Sharp",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39721,
.left_margin = 20,
.right_margin = 44,
.upper_margin = 21,
.lower_margin = 34,
.hsync_len = 96,
.vsync_len = 2,
.sync = 0,
.vmode = FB_VMODE_NONINTERLACED,
},
.width = -1,
.height = -1,
.tim2 = TIM2_IVS | TIM2_IHS,
.cntl = CNTL_LCDTFT,
.bpp = 16,
},
};
static void __init aaed2000_init_irq(void)
{
aaec2000_init_irq();
}
static void __init aaed2000_init(void)
{
aaec2000_set_clcd_plat_data(&clcd_info);
}
static struct map_desc aaed2000_io_desc[] __initdata = {
{ EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */
};
static void __init aaed2000_map_io(void)
{
aaec2000_map_io();
iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc));
}
MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
/* Maintainer: Nicolas Bellido Y Ortega */
.phys_ram = 0xf0000000,
.phys_io = PIO_BASE,
.io_pg_offst = ((VIO_BASE) >> 18) & 0xfffc,
.map_io = aaed2000_map_io,
.init_irq = aaed2000_init_irq,
.timer = &aaec2000_timer,
.init_machine = aaed2000_init,
MACHINE_END