| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * This file contains work-arounds for many known PCI hardware bugs. |
| * Devices present only on certain architectures (host bridges et cetera) |
| * should be handled in arch-specific code. |
| * |
| * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. |
| * |
| * Copyright (c) 1999 Martin Mares <mj@ucw.cz> |
| * |
| * Init/reset quirks for USB host controllers should be in the USB quirks |
| * file, where their drivers can use them. |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/export.h> |
| #include <linux/pci.h> |
| #include <linux/isa-dma.h> /* isa_dma_bridge_buggy */ |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/acpi.h> |
| #include <linux/dmi.h> |
| #include <linux/ioport.h> |
| #include <linux/sched.h> |
| #include <linux/ktime.h> |
| #include <linux/mm.h> |
| #include <linux/nvme.h> |
| #include <linux/platform_data/x86/apple.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/suspend.h> |
| #include <linux/switchtec.h> |
| #include "pci.h" |
| |
| static ktime_t fixup_debug_start(struct pci_dev *dev, |
| void (*fn)(struct pci_dev *dev)) |
| { |
| if (initcall_debug) |
| pci_info(dev, "calling %pS @ %i\n", fn, task_pid_nr(current)); |
| |
| return ktime_get(); |
| } |
| |
| static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, |
| void (*fn)(struct pci_dev *dev)) |
| { |
| ktime_t delta, rettime; |
| unsigned long long duration; |
| |
| rettime = ktime_get(); |
| delta = ktime_sub(rettime, calltime); |
| duration = (unsigned long long) ktime_to_ns(delta) >> 10; |
| if (initcall_debug || duration > 10000) |
| pci_info(dev, "%pS took %lld usecs\n", fn, duration); |
| } |
| |
| static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, |
| struct pci_fixup *end) |
| { |
| ktime_t calltime; |
| |
| for (; f < end; f++) |
| if ((f->class == (u32) (dev->class >> f->class_shift) || |
| f->class == (u32) PCI_ANY_ID) && |
| (f->vendor == dev->vendor || |
| f->vendor == (u16) PCI_ANY_ID) && |
| (f->device == dev->device || |
| f->device == (u16) PCI_ANY_ID)) { |
| void (*hook)(struct pci_dev *dev); |
| #ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS |
| hook = offset_to_ptr(&f->hook_offset); |
| #else |
| hook = f->hook; |
| #endif |
| calltime = fixup_debug_start(dev, hook); |
| hook(dev); |
| fixup_debug_report(dev, calltime, hook); |
| } |
| } |
| |
| extern struct pci_fixup __start_pci_fixups_early[]; |
| extern struct pci_fixup __end_pci_fixups_early[]; |
| extern struct pci_fixup __start_pci_fixups_header[]; |
| extern struct pci_fixup __end_pci_fixups_header[]; |
| extern struct pci_fixup __start_pci_fixups_final[]; |
| extern struct pci_fixup __end_pci_fixups_final[]; |
| extern struct pci_fixup __start_pci_fixups_enable[]; |
| extern struct pci_fixup __end_pci_fixups_enable[]; |
| extern struct pci_fixup __start_pci_fixups_resume[]; |
| extern struct pci_fixup __end_pci_fixups_resume[]; |
| extern struct pci_fixup __start_pci_fixups_resume_early[]; |
| extern struct pci_fixup __end_pci_fixups_resume_early[]; |
| extern struct pci_fixup __start_pci_fixups_suspend[]; |
| extern struct pci_fixup __end_pci_fixups_suspend[]; |
| extern struct pci_fixup __start_pci_fixups_suspend_late[]; |
| extern struct pci_fixup __end_pci_fixups_suspend_late[]; |
| |
| static bool pci_apply_fixup_final_quirks; |
| |
| void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) |
| { |
| struct pci_fixup *start, *end; |
| |
| switch (pass) { |
| case pci_fixup_early: |
| start = __start_pci_fixups_early; |
| end = __end_pci_fixups_early; |
| break; |
| |
| case pci_fixup_header: |
| start = __start_pci_fixups_header; |
| end = __end_pci_fixups_header; |
| break; |
| |
| case pci_fixup_final: |
| if (!pci_apply_fixup_final_quirks) |
| return; |
| start = __start_pci_fixups_final; |
| end = __end_pci_fixups_final; |
| break; |
| |
| case pci_fixup_enable: |
| start = __start_pci_fixups_enable; |
| end = __end_pci_fixups_enable; |
| break; |
| |
| case pci_fixup_resume: |
| start = __start_pci_fixups_resume; |
| end = __end_pci_fixups_resume; |
| break; |
| |
| case pci_fixup_resume_early: |
| start = __start_pci_fixups_resume_early; |
| end = __end_pci_fixups_resume_early; |
| break; |
| |
| case pci_fixup_suspend: |
| start = __start_pci_fixups_suspend; |
| end = __end_pci_fixups_suspend; |
| break; |
| |
| case pci_fixup_suspend_late: |
| start = __start_pci_fixups_suspend_late; |
| end = __end_pci_fixups_suspend_late; |
| break; |
| |
| default: |
| /* stupid compiler warning, you would think with an enum... */ |
| return; |
| } |
| pci_do_fixups(dev, start, end); |
| } |
| EXPORT_SYMBOL(pci_fixup_device); |
| |
| static int __init pci_apply_final_quirks(void) |
| { |
| struct pci_dev *dev = NULL; |
| u8 cls = 0; |
| u8 tmp; |
| |
| if (pci_cache_line_size) |
| pr_info("PCI: CLS %u bytes\n", pci_cache_line_size << 2); |
| |
| pci_apply_fixup_final_quirks = true; |
| for_each_pci_dev(dev) { |
| pci_fixup_device(pci_fixup_final, dev); |
| /* |
| * If arch hasn't set it explicitly yet, use the CLS |
| * value shared by all PCI devices. If there's a |
| * mismatch, fall back to the default value. |
| */ |
| if (!pci_cache_line_size) { |
| pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp); |
| if (!cls) |
| cls = tmp; |
| if (!tmp || cls == tmp) |
| continue; |
| |
| pci_info(dev, "CLS mismatch (%u != %u), using %u bytes\n", |
| cls << 2, tmp << 2, |
| pci_dfl_cache_line_size << 2); |
| pci_cache_line_size = pci_dfl_cache_line_size; |
| } |
| } |
| |
| if (!pci_cache_line_size) { |
| pr_info("PCI: CLS %u bytes, default %u\n", cls << 2, |
| pci_dfl_cache_line_size << 2); |
| pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; |
| } |
| |
| return 0; |
| } |
| fs_initcall_sync(pci_apply_final_quirks); |
| |
| /* |
| * Decoding should be disabled for a PCI device during BAR sizing to avoid |
| * conflict. But doing so may cause problems on host bridge and perhaps other |
| * key system devices. For devices that need to have mmio decoding always-on, |
| * we need to set the dev->mmio_always_on bit. |
| */ |
| static void quirk_mmio_always_on(struct pci_dev *dev) |
| { |
| dev->mmio_always_on = 1; |
| } |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); |
| |
| /* |
| * The Mellanox Tavor device gives false positive parity errors. Disable |
| * parity error reporting. |
| */ |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, pci_disable_parity); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, pci_disable_parity); |
| |
| /* |
| * Deal with broken BIOSes that neglect to enable passive release, |
| * which can cause problems in combination with the 82441FX/PPro MTRRs |
| */ |
| static void quirk_passive_release(struct pci_dev *dev) |
| { |
| struct pci_dev *d = NULL; |
| unsigned char dlc; |
| |
| /* |
| * We have to make sure a particular bit is set in the PIIX3 |
| * ISA bridge, so we have to go out and find it. |
| */ |
| while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { |
| pci_read_config_byte(d, 0x82, &dlc); |
| if (!(dlc & 1<<1)) { |
| pci_info(d, "PIIX3: Enabling Passive Release\n"); |
| dlc |= 1<<1; |
| pci_write_config_byte(d, 0x82, dlc); |
| } |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); |
| |
| #ifdef CONFIG_X86_32 |
| /* |
| * The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a |
| * workaround but VIA don't answer queries. If you happen to have good |
| * contacts at VIA ask them for me please -- Alan |
| * |
| * This appears to be BIOS not version dependent. So presumably there is a |
| * chipset level fix. |
| */ |
| static void quirk_isa_dma_hangs(struct pci_dev *dev) |
| { |
| if (!isa_dma_bridge_buggy) { |
| isa_dma_bridge_buggy = 1; |
| pci_info(dev, "Activating ISA DMA hang workarounds\n"); |
| } |
| } |
| /* |
| * It's not totally clear which chipsets are the problematic ones. We know |
| * 82C586 and 82C596 variants are affected. |
| */ |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); |
| #endif |
| |
| /* |
| * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear |
| * for some HT machines to use C4 w/o hanging. |
| */ |
| static void quirk_tigerpoint_bm_sts(struct pci_dev *dev) |
| { |
| u32 pmbase; |
| u16 pm1a; |
| |
| pci_read_config_dword(dev, 0x40, &pmbase); |
| pmbase = pmbase & 0xff80; |
| pm1a = inw(pmbase); |
| |
| if (pm1a & 0x10) { |
| pci_info(dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); |
| outw(0x10, pmbase); |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); |
| |
| /* Chipsets where PCI->PCI transfers vanish or hang */ |
| static void quirk_nopcipci(struct pci_dev *dev) |
| { |
| if ((pci_pci_problems & PCIPCI_FAIL) == 0) { |
| pci_info(dev, "Disabling direct PCI/PCI transfers\n"); |
| pci_pci_problems |= PCIPCI_FAIL; |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); |
| |
| static void quirk_nopciamd(struct pci_dev *dev) |
| { |
| u8 rev; |
| pci_read_config_byte(dev, 0x08, &rev); |
| if (rev == 0x13) { |
| /* Erratum 24 */ |
| pci_info(dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n"); |
| pci_pci_problems |= PCIAGP_FAIL; |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd); |
| |
| /* Triton requires workarounds to be used by the drivers */ |
| static void quirk_triton(struct pci_dev *dev) |
| { |
| if ((pci_pci_problems&PCIPCI_TRITON) == 0) { |
| pci_info(dev, "Limiting direct PCI/PCI transfers\n"); |
| pci_pci_problems |= PCIPCI_TRITON; |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); |
| |
| /* |
| * VIA Apollo KT133 needs PCI latency patch |
| * Made according to a Windows driver-based patch by George E. Breese; |
| * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm |
| * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for the info on |
| * which Mr Breese based his work. |
| * |
| * Updated based on further information from the site and also on |
| * information provided by VIA |
| */ |
| static void quirk_vialatency(struct pci_dev *dev) |
| { |
| struct pci_dev *p; |
| u8 busarb; |
| |
| /* |
| * Ok, we have a potential problem chipset here. Now see if we have |
| * a buggy southbridge. |
| */ |
| p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); |
| if (p != NULL) { |
| |
| /* |
| * 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; |
| * thanks Dan Hollis. |
| * Check for buggy part revisions |
| */ |
| if (p->revision < 0x40 || p->revision > 0x42) |
| goto exit; |
| } else { |
| p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); |
| if (p == NULL) /* No problem parts */ |
| goto exit; |
| |
| /* Check for buggy part revisions */ |
| if (p->revision < 0x10 || p->revision > 0x12) |
| goto exit; |
| } |
| |
| /* |
| * Ok we have the problem. Now set the PCI master grant to occur |
| * every master grant. The apparent bug is that under high PCI load |
| * (quite common in Linux of course) you can get data loss when the |
| * CPU is held off the bus for 3 bus master requests. This happens |
| * to include the IDE controllers.... |
| * |
| * VIA only apply this fix when an SB Live! is present but under |
| * both Linux and Windows this isn't enough, and we have seen |
| * corruption without SB Live! but with things like 3 UDMA IDE |
| * controllers. So we ignore that bit of the VIA recommendation.. |
| */ |
| pci_read_config_byte(dev, 0x76, &busarb); |
| |
| /* |
| * Set bit 4 and bit 5 of byte 76 to 0x01 |
| * "Master priority rotation on every PCI master grant" |
| */ |
| busarb &= ~(1<<5); |
| busarb |= (1<<4); |
| pci_write_config_byte(dev, 0x76, busarb); |
| pci_info(dev, "Applying VIA southbridge workaround\n"); |
| exit: |
| pci_dev_put(p); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); |
| /* Must restore this on a resume from RAM */ |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); |
| |
| /* VIA Apollo VP3 needs ETBF on BT848/878 */ |
| static void quirk_viaetbf(struct pci_dev *dev) |
| { |
| if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) { |
| pci_info(dev, "Limiting direct PCI/PCI transfers\n"); |
| pci_pci_problems |= PCIPCI_VIAETBF; |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); |
| |
| static void quirk_vsfx(struct pci_dev *dev) |
| { |
| if ((pci_pci_problems&PCIPCI_VSFX) == 0) { |
| pci_info(dev, "Limiting direct PCI/PCI transfers\n"); |
| pci_pci_problems |= PCIPCI_VSFX; |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx); |
| |
| /* |
| * ALi Magik requires workarounds to be used by the drivers that DMA to AGP |
| * space. Latency must be set to 0xA and Triton workaround applied too. |
| * [Info kindly provided by ALi] |
| */ |
| static void quirk_alimagik(struct pci_dev *dev) |
| { |
| if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) { |
| pci_info(dev, "Limiting direct PCI/PCI transfers\n"); |
| pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); |
| |
| /* Natoma has some interesting boundary conditions with Zoran stuff at least */ |
| static void quirk_natoma(struct pci_dev *dev) |
| { |
| if ((pci_pci_problems&PCIPCI_NATOMA) == 0) { |
| pci_info(dev, "Limiting direct PCI/PCI transfers\n"); |
| pci_pci_problems |= PCIPCI_NATOMA; |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); |
| |
| /* |
| * This chip can cause PCI parity errors if config register 0xA0 is read |
| * while DMAs are occurring. |
| */ |
| static void quirk_citrine(struct pci_dev *dev) |
| { |
| dev->cfg_size = 0xA0; |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine); |
| |
| /* |
| * This chip can cause bus lockups if config addresses above 0x600 |
| * are read or written. |
| */ |
| static void quirk_nfp6000(struct pci_dev *dev) |
| { |
| dev->cfg_size = 0x600; |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP4000, quirk_nfp6000); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000, quirk_nfp6000); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP5000, quirk_nfp6000); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000_VF, quirk_nfp6000); |
| |
| /* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */ |
| static void quirk_extend_bar_to_page(struct pci_dev *dev) |
| { |
| int i; |
| |
| for (i = 0; i < PCI_STD_NUM_BARS; i++) { |
| struct resource *r = &dev->resource[i]; |
| |
| if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) { |
| r->end = PAGE_SIZE - 1; |
| r->start = 0; |
| r->flags |= IORESOURCE_UNSET; |
| pci_info(dev, "expanded BAR %d to page size: %pR\n", |
| i, r); |
| } |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page); |
| |
| /* |
| * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. |
| * If it's needed, re-allocate the region. |
| */ |
| static void quirk_s3_64M(struct pci_dev *dev) |
| { |
| struct resource *r = &dev->resource[0]; |
| |
| if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { |
| r->flags |= IORESOURCE_UNSET; |
| r->start = 0; |
| r->end = 0x3ffffff; |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); |
| |
| static void quirk_io(struct pci_dev *dev, int pos, unsigned int size, |
| const char *name) |
| { |
| u32 region; |
| struct pci_bus_region bus_region; |
| struct resource *res = dev->resource + pos; |
| |
| pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), ®ion); |
| |
| if (!region) |
| return; |
| |
| res->name = pci_name(dev); |
| res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK; |
| res->flags |= |
| (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN); |
| region &= ~(size - 1); |
| |
| /* Convert from PCI bus to resource space */ |
| bus_region.start = region; |
| bus_region.end = region + size - 1; |
| pcibios_bus_to_resource(dev->bus, res, &bus_region); |
| |
| pci_info(dev, FW_BUG "%s quirk: reg 0x%x: %pR\n", |
| name, PCI_BASE_ADDRESS_0 + (pos << 2), res); |
| } |
| |
| /* |
| * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS |
| * ver. 1.33 20070103) don't set the correct ISA PCI region header info. |
| * BAR0 should be 8 bytes; instead, it may be set to something like 8k |
| * (which conflicts w/ BAR1's memory range). |
| * |
| * CS553x's ISA PCI BARs may also be read-only (ref: |
| * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward). |
| */ |
| static void quirk_cs5536_vsa(struct pci_dev *dev) |
| { |
| static char *name = "CS5536 ISA bridge"; |
| |
| if (pci_resource_len(dev, 0) != 8) { |
| quirk_io(dev, 0, 8, name); /* SMB */ |
| quirk_io(dev, 1, 256, name); /* GPIO */ |
| quirk_io(dev, 2, 64, name); /* MFGPT */ |
| pci_info(dev, "%s bug detected (incorrect header); workaround applied\n", |
| name); |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); |
| |
| static void quirk_io_region(struct pci_dev *dev, int port, |
| unsigned int size, int nr, const char *name) |
| { |
| u16 region; |
| struct pci_bus_region bus_region; |
| struct resource *res = dev->resource + nr; |
| |
| pci_read_config_word(dev, port, ®ion); |
| region &= ~(size - 1); |
| |
| if (!region) |
| return; |
| |
| res->name = pci_name(dev); |
| res->flags = IORESOURCE_IO; |
| |
| /* Convert from PCI bus to resource space */ |
| bus_region.start = region; |
| bus_region.end = region + size - 1; |
| pcibios_bus_to_resource(dev->bus, res, &bus_region); |
| |
| if (!pci_claim_resource(dev, nr)) |
| pci_info(dev, "quirk: %pR claimed by %s\n", res, name); |
| } |
| |
| /* |
| * ATI Northbridge setups MCE the processor if you even read somewhere |
| * between 0x3b0->0x3bb or read 0x3d3 |
| */ |
| static void quirk_ati_exploding_mce(struct pci_dev *dev) |
| { |
| pci_info(dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); |
| /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ |
| request_region(0x3b0, 0x0C, "RadeonIGP"); |
| request_region(0x3d3, 0x01, "RadeonIGP"); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce); |
| |
| /* |
| * In the AMD NL platform, this device ([1022:7912]) has a class code of |
| * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will |
| * claim it. |
| * |
| * But the dwc3 driver is a more specific driver for this device, and we'd |
| * prefer to use it instead of xhci. To prevent xhci from claiming the |
| * device, change the class code to 0x0c03fe, which the PCI r3.0 spec |
| * defines as "USB device (not host controller)". The dwc3 driver can then |
| * claim it based on its Vendor and Device ID. |
| */ |
| static void quirk_amd_nl_class(struct pci_dev *pdev) |
| { |
| u32 class = pdev->class; |
| |
| /* Use "USB Device (not host controller)" class */ |
| pdev->class = PCI_CLASS_SERIAL_USB_DEVICE; |
| pci_info(pdev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n", |
| class, pdev->class); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB, |
| quirk_amd_nl_class); |
| |
| /* |
| * Synopsys USB 3.x host HAPS platform has a class code of |
| * PCI_CLASS_SERIAL_USB_XHCI, and xhci driver can claim it. However, these |
| * devices should use dwc3-haps driver. Change these devices' class code to |
| * PCI_CLASS_SERIAL_USB_DEVICE to prevent the xhci-pci driver from claiming |
| * them. |
| */ |
| static void quirk_synopsys_haps(struct pci_dev *pdev) |
| { |
| u32 class = pdev->class; |
| |
| switch (pdev->device) { |
| case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3: |
| case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI: |
| case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31: |
| pdev->class = PCI_CLASS_SERIAL_USB_DEVICE; |
| pci_info(pdev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n", |
| class, pdev->class); |
| break; |
| } |
| } |
| DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, PCI_ANY_ID, |
| PCI_CLASS_SERIAL_USB_XHCI, 0, |
| quirk_synopsys_haps); |
| |
| /* |
| * Let's make the southbridge information explicit instead of having to |
| * worry about people probing the ACPI areas, for example.. (Yes, it |
| * happens, and if you read the wrong ACPI register it will put the machine |
| * to sleep with no way of waking it up again. Bummer). |
| * |
| * ALI M7101: Two IO regions pointed to by words at |
| * 0xE0 (64 bytes of ACPI registers) |
| * 0xE2 (32 bytes of SMB registers) |
| */ |
| static void quirk_ali7101_acpi(struct pci_dev *dev) |
| { |
| quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); |
| quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi); |
| |
| static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) |
| { |
| u32 devres; |
| u32 mask, size, base; |
| |
| pci_read_config_dword(dev, port, &devres); |
| if ((devres & enable) != enable) |
| return; |
| mask = (devres >> 16) & 15; |
| base = devres & 0xffff; |
| size = 16; |
| for (;;) { |
| unsigned int bit = size >> 1; |
| if ((bit & mask) == bit) |
| break; |
| size = bit; |
| } |
| /* |
| * For now we only print it out. Eventually we'll want to |
| * reserve it (at least if it's in the 0x1000+ range), but |
| * let's get enough confirmation reports first. |
| */ |
| base &= -size; |
| pci_info(dev, "%s PIO at %04x-%04x\n", name, base, base + size - 1); |
| } |
| |
| static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) |
| { |
| u32 devres; |
| u32 mask, size, base; |
| |
| pci_read_config_dword(dev, port, &devres); |
| if ((devres & enable) != enable) |
| return; |
| base = devres & 0xffff0000; |
| mask = (devres & 0x3f) << 16; |
| size = 128 << 16; |
| for (;;) { |
| unsigned int bit = size >> 1; |
| if ((bit & mask) == bit) |
| break; |
| size = bit; |
| } |
| |
| /* |
| * For now we only print it out. Eventually we'll want to |
| * reserve it, but let's get enough confirmation reports first. |
| */ |
| base &= -size; |
| pci_info(dev, "%s MMIO at %04x-%04x\n", name, base, base + size - 1); |
| } |
| |
| /* |
| * PIIX4 ACPI: Two IO regions pointed to by longwords at |
| * 0x40 (64 bytes of ACPI registers) |
| * 0x90 (16 bytes of SMB registers) |
| * and a few strange programmable PIIX4 device resources. |
| */ |
| static void quirk_piix4_acpi(struct pci_dev *dev) |
| { |
| u32 res_a; |
| |
| quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); |
| quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); |
| |
| /* Device resource A has enables for some of the other ones */ |
| pci_read_config_dword(dev, 0x5c, &res_a); |
| |
| piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); |
| piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); |
| |
| /* Device resource D is just bitfields for static resources */ |
| |
| /* Device 12 enabled? */ |
| if (res_a & (1 << 29)) { |
| piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); |
| piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); |
| } |
| /* Device 13 enabled? */ |
| if (res_a & (1 << 30)) { |
| piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); |
| piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); |
| } |
| piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); |
| piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi); |
| |
| #define ICH_PMBASE 0x40 |
| #define ICH_ACPI_CNTL 0x44 |
| #define ICH4_ACPI_EN 0x10 |
| #define ICH6_ACPI_EN 0x80 |
| #define ICH4_GPIOBASE 0x58 |
| #define ICH4_GPIO_CNTL 0x5c |
| #define ICH4_GPIO_EN 0x10 |
| #define ICH6_GPIOBASE 0x48 |
| #define ICH6_GPIO_CNTL 0x4c |
| #define ICH6_GPIO_EN 0x10 |
| |
| /* |
| * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at |
| * 0x40 (128 bytes of ACPI, GPIO & TCO registers) |
| * 0x58 (64 bytes of GPIO I/O space) |
| */ |
| static void quirk_ich4_lpc_acpi(struct pci_dev *dev) |
| { |
| u8 enable; |
| |
| /* |
| * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict |
| * with low legacy (and fixed) ports. We don't know the decoding |
| * priority and can't tell whether the legacy device or the one created |
| * here is really at that address. This happens on boards with broken |
| * BIOSes. |
| */ |
| pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); |
| if (enable & ICH4_ACPI_EN) |
| quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, |
| "ICH4 ACPI/GPIO/TCO"); |
| |
| pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable); |
| if (enable & ICH4_GPIO_EN) |
| quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, |
| "ICH4 GPIO"); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); |
| |
| static void ich6_lpc_acpi_gpio(struct pci_dev *dev) |
| { |
| u8 enable; |
| |
| pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); |
| if (enable & ICH6_ACPI_EN) |
| quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, |
| "ICH6 ACPI/GPIO/TCO"); |
| |
| pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable); |
| if (enable & ICH6_GPIO_EN) |
| quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, |
| "ICH6 GPIO"); |
| } |
| |
| static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned int reg, |
| const char *name, int dynsize) |
| { |
| u32 val; |
| u32 size, base; |
| |
| pci_read_config_dword(dev, reg, &val); |
| |
| /* Enabled? */ |
| if (!(val & 1)) |
| return; |
| base = val & 0xfffc; |
| if (dynsize) { |
| /* |
| * This is not correct. It is 16, 32 or 64 bytes depending on |
| * register D31:F0:ADh bits 5:4. |
| * |
| * But this gets us at least _part_ of it. |
| */ |
| size = 16; |
| } else { |
| size = 128; |
| } |
| base &= ~(size-1); |
| |
| /* |
| * Just print it out for now. We should reserve it after more |
| * debugging. |
| */ |
| pci_info(dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); |
| } |
| |
| static void quirk_ich6_lpc(struct pci_dev *dev) |
| { |
| /* Shared ACPI/GPIO decode with all ICH6+ */ |
| ich6_lpc_acpi_gpio(dev); |
| |
| /* ICH6-specific generic IO decode */ |
| ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0); |
| ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); |
| |
| static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned int reg, |
| const char *name) |
| { |
| u32 val; |
| u32 mask, base; |
| |
| pci_read_config_dword(dev, reg, &val); |
| |
| /* Enabled? */ |
| if (!(val & 1)) |
| return; |
| |
| /* IO base in bits 15:2, mask in bits 23:18, both are dword-based */ |
| base = val & 0xfffc; |
| mask = (val >> 16) & 0xfc; |
| mask |= 3; |
| |
| /* |
| * Just print it out for now. We should reserve it after more |
| * debugging. |
| */ |
| pci_info(dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); |
| } |
| |
| /* ICH7-10 has the same common LPC generic IO decode registers */ |
| static void quirk_ich7_lpc(struct pci_dev *dev) |
| { |
| /* We share the common ACPI/GPIO decode with ICH6 */ |
| ich6_lpc_acpi_gpio(dev); |
| |
| /* And have 4 ICH7+ generic decodes */ |
| ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1"); |
| ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2"); |
| ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3"); |
| ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4"); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc); |
| |
| /* |
| * VIA ACPI: One IO region pointed to by longword at |
| * 0x48 or 0x20 (256 bytes of ACPI registers) |
| */ |
| static void quirk_vt82c586_acpi(struct pci_dev *dev) |
| { |
| if (dev->revision & 0x10) |
| quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES, |
| "vt82c586 ACPI"); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi); |
| |
| /* |
| * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at |
| * 0x48 (256 bytes of ACPI registers) |
| * 0x70 (128 bytes of hardware monitoring register) |
| * 0x90 (16 bytes of SMB registers) |
| */ |
| static void quirk_vt82c686_acpi(struct pci_dev *dev) |
| { |
| quirk_vt82c586_acpi(dev); |
| |
| quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1, |
| "vt82c686 HW-mon"); |
| |
| quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB"); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi); |
| |
| /* |
| * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at |
| * 0x88 (128 bytes of power management registers) |
| * 0xd0 (16 bytes of SMB registers) |
| */ |
| static void quirk_vt8235_acpi(struct pci_dev *dev) |
| { |
| quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); |
| quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB"); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); |
| |
| /* |
| * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast |
| * back-to-back: Disable fast back-to-back on the secondary bus segment |
| */ |
| static void quirk_xio2000a(struct pci_dev *dev) |
| { |
| struct pci_dev *pdev; |
| u16 command; |
| |
| pci_warn(dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n"); |
| list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { |
| pci_read_config_word(pdev, PCI_COMMAND, &command); |
| if (command & PCI_COMMAND_FAST_BACK) |
| pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, |
| quirk_xio2000a); |
| |
| #ifdef CONFIG_X86_IO_APIC |
| |
| #include <asm/io_apic.h> |
| |
| /* |
| * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip |
| * devices to the external APIC. |
| * |
| * TODO: When we have device-specific interrupt routers, this code will go |
| * away from quirks. |
| */ |
| static void quirk_via_ioapic(struct pci_dev *dev) |
| { |
| u8 tmp; |
| |
| if (nr_ioapics < 1) |
| tmp = 0; /* nothing routed to external APIC */ |
| else |
| tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ |
| |
| pci_info(dev, "%s VIA external APIC routing\n", |
| tmp ? "Enabling" : "Disabling"); |
| |
| /* Offset 0x58: External APIC IRQ output control */ |
| pci_write_config_byte(dev, 0x58, tmp); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); |
| |
| /* |
| * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit. |
| * This leads to doubled level interrupt rates. |
| * Set this bit to get rid of cycle wastage. |
| * Otherwise uncritical. |
| */ |
| static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) |
| { |
| u8 misc_control2; |
| #define BYPASS_APIC_DEASSERT 8 |
| |
| pci_read_config_byte(dev, 0x5B, &misc_control2); |
| if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { |
| pci_info(dev, "Bypassing VIA 8237 APIC De-Assert Message\n"); |
| pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); |
| |
| /* |
| * The AMD IO-APIC can hang the box when an APIC IRQ is masked. |
| * We check all revs >= B0 (yet not in the pre production!) as the bug |
| * is currently marked NoFix |
| * |
| * We have multiple reports of hangs with this chipset that went away with |
| * noapic specified. For the moment we assume it's the erratum. We may be wrong |
| * of course. However the advice is demonstrably good even if so. |
| */ |
| static void quirk_amd_ioapic(struct pci_dev *dev) |
| { |
| if (dev->revision >= 0x02) { |
| pci_warn(dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); |
| pci_warn(dev, " : booting with the \"noapic\" option\n"); |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); |
| #endif /* CONFIG_X86_IO_APIC */ |
| |
| #if defined(CONFIG_ARM64) && defined(CONFIG_PCI_ATS) |
| |
| static void quirk_cavium_sriov_rnm_link(struct pci_dev *dev) |
| { |
| /* Fix for improper SR-IOV configuration on Cavium cn88xx RNM device */ |
| if (dev->subsystem_device == 0xa118) |
| dev->sriov->link = dev->devfn; |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CAVIUM, 0xa018, quirk_cavium_sriov_rnm_link); |
| #endif |
| |
| /* |
| * Some settings of MMRBC can lead to data corruption so block changes. |
| * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide |
| */ |
| static void quirk_amd_8131_mmrbc(struct pci_dev *dev) |
| { |
| if (dev->subordinate && dev->revision <= 0x12) { |
| pci_info(dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n", |
| dev->revision); |
| dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); |
| |
| /* |
| * FIXME: it is questionable that quirk_via_acpi() is needed. It shows up |
| * as an ISA bridge, and does not support the PCI_INTERRUPT_LINE register |
| * at all. Therefore it seems like setting the pci_dev's IRQ to the value |
| * of the ACPI SCI interrupt is only done for convenience. |
| * -jgarzik |
| */ |
| static void quirk_via_acpi(struct pci_dev *d) |
| { |
| u8 irq; |
| |
| /* VIA ACPI device: SCI IRQ line in PCI config byte 0x42 */ |
| pci_read_config_byte(d, 0x42, &irq); |
| irq &= 0xf; |
| if (irq && (irq != 2)) |
| d->irq = irq; |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi); |
| |
| /* VIA bridges which have VLink */ |
| static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18; |
| |
| static void quirk_via_bridge(struct pci_dev *dev) |
| { |
| /* See what bridge we have and find the device ranges */ |
| switch (dev->device) { |
| case PCI_DEVICE_ID_VIA_82C686: |
| /* |
| * The VT82C686 is special; it attaches to PCI and can have |
| * any device number. All its subdevices are functions of |
| * that single device. |
| */ |
| via_vlink_dev_lo = PCI_SLOT(dev->devfn); |
| via_vlink_dev_hi = PCI_SLOT(dev->devfn); |
| break; |
| case PCI_DEVICE_ID_VIA_8237: |
| case PCI_DEVICE_ID_VIA_8237A: |
| via_vlink_dev_lo = 15; |
| break; |
| case PCI_DEVICE_ID_VIA_8235: |
| via_vlink_dev_lo = 16; |
| break; |
| case PCI_DEVICE_ID_VIA_8231: |
| case PCI_DEVICE_ID_VIA_8233_0: |
| case PCI_DEVICE_ID_VIA_8233A: |
| case PCI_DEVICE_ID_VIA_8233C_0: |
| via_vlink_dev_lo = 17; |
| break; |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge); |
| |
| /* |
| * quirk_via_vlink - VIA VLink IRQ number update |
| * @dev: PCI device |
| * |
| * If the device we are dealing with is on a PIC IRQ we need to ensure that |
| * the IRQ line register which usually is not relevant for PCI cards, is |
| * actually written so that interrupts get sent to the right place. |
| * |
| * We only do this on systems where a VIA south bridge was detected, and |
| * only for VIA devices on the motherboard (see quirk_via_bridge above). |
| */ |
| static void quirk_via_vlink(struct pci_dev *dev) |
| { |
| u8 irq, new_irq; |
| |
| /* Check if we have VLink at all */ |
| if (via_vlink_dev_lo == -1) |
| return; |
| |
| new_irq = dev->irq; |
| |
| /* Don't quirk interrupts outside the legacy IRQ range */ |
| if (!new_irq || new_irq > 15) |
| return; |
| |
| /* Internal device ? */ |
| if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi || |
| PCI_SLOT(dev->devfn) < via_vlink_dev_lo) |
| return; |
| |
| /* |
| * This is an internal VLink device on a PIC interrupt. The BIOS |
| * ought to have set this but may not have, so we redo it. |
| */ |
| pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); |
| if (new_irq != irq) { |
| pci_info(dev, "VIA VLink IRQ fixup, from %d to %d\n", |
| irq, new_irq); |
| udelay(15); /* unknown if delay really needed */ |
| pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); |
| } |
| } |
| DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); |
| |
| /* |
| * VIA VT82C598 has its device ID settable and many BIOSes set it to the ID |
| * of VT82C597 for backward compatibility. We need to switch it off to be |
| * able to recognize the real type of the chip. |
| */ |
| static void quirk_vt82c598_id(struct pci_dev *dev) |
| { |
| pci_write_config_byte(dev, 0xfc, 0); |
| pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id); |
| |
| /* |
| * CardBus controllers have a legacy base address that enables them to |
| * respond as i82365 pcmcia controllers. We don't want them to do this |
| * even if the Linux CardBus driver is not loaded, because the Linux i82365 |
| * driver does not (and should not) handle CardBus. |
| */ |
| static void quirk_cardbus_legacy(struct pci_dev *dev) |
| { |
| pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); |
| } |
| DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); |
| DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, |
| PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); |
| |
| /* |
| * Following the PCI ordering rules is optional on the AMD762. I'm not sure |
| * what the designers were smoking but let's not inhale... |
| * |
| * To be fair to AMD, it follows the spec by default, it's BIOS people who |
| * turn it off! |
| */ |
| static void quirk_amd_ordering(struct pci_dev *dev) |
| { |
| u32 pcic; |
| pci_read_config_dword(dev, 0x4C, &pcic); |
| if ((pcic & 6) != 6) { |
| pcic |= 6; |
| pci_warn(dev, "BIOS failed to enable PCI standards compliance; fixing this error\n"); |
| pci_write_config_dword(dev, 0x4C, pcic); |
| pci_read_config_dword(dev, 0x84, &pcic); |
| pcic |= (1 << 23); /* Required in this mode */ |
| pci_write_config_dword(dev, 0x84, pcic); |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); |
| |
| /* |
| * DreamWorks-provided workaround for Dunord I-3000 problem |
| * |
| * This card decodes and responds to addresses not apparently assigned to |
| * it. We force a larger allocation to ensure that nothing gets put too |
| * close to it. |
| */ |
| static void quirk_dunord(struct pci_dev *dev) |
| { |
| struct resource *r = &dev->resource[1]; |
| |
| r->flags |= IORESOURCE_UNSET; |
| r->start = 0; |
| r->end = 0xffffff; |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord); |
| |
| /* |
| * i82380FB mobile docking controller: its PCI-to-PCI bridge is subtractive |
| * decoding (transparent), and does indicate this in the ProgIf. |
| * Unfortunately, the ProgIf value is wrong - 0x80 instead of 0x01. |
| */ |
| static void quirk_transparent_bridge(struct pci_dev *dev) |
| { |
| dev->transparent = 1; |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); |
| |
| /* |
| * Common misconfiguration of the MediaGX/Geode PCI master that will reduce |
| * PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 datasheets |
| * found at http://www.national.com/analog for info on what these bits do. |
| * <christer@weinigel.se> |
| */ |
| static void quirk_mediagx_master(struct pci_dev *dev) |
| { |
| u8 reg; |
| |
| pci_read_config_byte(dev, 0x41, ®); |
| if (reg & 2) { |
| reg &= ~2; |
| pci_info(dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", |
| reg); |
| pci_write_config_byte(dev, 0x41, reg); |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); |
| |
| /* |
| * Ensure C0 rev restreaming is off. This is normally done by the BIOS but |
| * in the odd case it is not the results are corruption hence the presence |
| * of a Linux check. |
| */ |
| static void quirk_disable_pxb(struct pci_dev *pdev) |
| { |
| u16 config; |
| |
| if (pdev->revision != 0x04) /* Only C0 requires this */ |
| return; |
| pci_read_config_word(pdev, 0x40, &config); |
| if (config & (1<<6)) { |
| config &= ~(1<<6); |
| pci_write_config_word(pdev, 0x40, config); |
| pci_info(pdev, "C0 revision 450NX. Disabling PCI restreaming\n"); |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); |
| |
| static void quirk_amd_ide_mode(struct pci_dev *pdev) |
| { |
| /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */ |
| u8 tmp; |
| |
| pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); |
| if (tmp == 0x01) { |
| pci_read_config_byte(pdev, 0x40, &tmp); |
| pci_write_config_byte(pdev, 0x40, tmp|1); |
| pci_write_config_byte(pdev, 0x9, 1); |
| pci_write_config_byte(pdev, 0xa, 6); |
| pci_write_config_byte(pdev, 0x40, tmp); |
| |
| pdev->class = PCI_CLASS_STORAGE_SATA_AHCI; |
| pci_info(pdev, "set SATA to AHCI mode\n"); |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); |
| |
| /* Serverworks CSB5 IDE does not fully support native mode */ |
| static void quirk_svwks_csb5ide(struct pci_dev *pdev) |
| { |
| u8 prog; |
| pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); |
| if (prog & 5) { |
| prog &= ~5; |
| pdev->class &= ~5; |
| pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); |
| /* PCI layer will sort out resources */ |
| } |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide); |
| |
| /* Intel 82801CAM ICH3-M datasheet says IDE modes must be the same */ |
| static void quirk_ide_samemode(struct pci_dev *pdev) |
| { |
| u8 prog; |
| |
| pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); |
| |
| if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { |
| pci_info(pdev, "IDE mode mismatch; forcing legacy mode\n"); |
| prog &= ~5; |
| pdev->class &= ~5; |
| pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); |
| } |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); |
| |
| /* Some ATA devices break if put into D3 */ |
| static void quirk_no_ata_d3(struct pci_dev *pdev) |
| { |
| pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; |
| } |
| /* Quirk the legacy ATA devices only. The AHCI ones are ok */ |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, |
| PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, |
| PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); |
| /* ALi loses some register settings that we cannot then restore */ |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, |
| PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); |
| /* VIA comes back fine but we need to keep it alive or ACPI GTM failures |
| occur when mode detecting */ |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, |
| PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); |
| |
| /* |
| * This was originally an Alpha-specific thing, but it really fits here. |
| * The i82375 PCI/EISA bridge appears as non-classified. Fix that. |
| */ |
| static void quirk_eisa_bridge(struct pci_dev *dev) |
| { |
| dev->class = PCI_CLASS_BRIDGE_EISA << 8; |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge); |
| |
| /* |
| * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge |
| * is not activated. The myth is that Asus said that they do not want the |
| * users to be irritated by just another PCI Device in the Win98 device |
| * manager. (see the file prog/hotplug/README.p4b in the lm_sensors |
| * package 2.7.0 for details) |
| * |
| * The SMBus PCI Device can be activated by setting a bit in the ICH LPC |
| * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it |
| * becomes necessary to do this tweak in two steps -- the chosen trigger |
| * is either the Host bridge (preferred) or on-board VGA controller. |
| * |
| * Note that we used to unhide the SMBus that way on Toshiba laptops |
| * (Satellite A40 and Tecra M2) but then found that the thermal management |
| * was done by SMM code, which could cause unsynchronized concurrent |
| * accesses to the SMBus registers, with potentially bad effects. Thus you |
| * should be very careful when adding new entries: if SMM is accessing the |
| * Intel SMBus, this is a very good reason to leave it hidden. |
| * |
| * Likewise, many recent laptops use ACPI for thermal management. If the |
| * ACPI DSDT code accesses the SMBus, then Linux should not access it |
| * natively, and keeping the SMBus hidden is the right thing to do. If you |
| * are about to add an entry in the table below, please first disassemble |
| * the DSDT and double-check that there is no code accessing the SMBus. |
| */ |
| static int asus_hides_smbus; |
| |
| static void asus_hides_smbus_hostbridge(struct pci_dev *dev) |
| { |
| if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { |
| if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) |
| switch (dev->subsystem_device) { |
| case 0x8025: /* P4B-LX */ |
| case 0x8070: /* P4B */ |
| case 0x8088: /* P4B533 */ |
| case 0x1626: /* L3C notebook */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) |
| switch (dev->subsystem_device) { |
| case 0x80b1: /* P4GE-V */ |
| case 0x80b2: /* P4PE */ |
| case 0x8093: /* P4B533-V */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) |
| switch (dev->subsystem_device) { |
| case 0x8030: /* P4T533 */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) |
| switch (dev->subsystem_device) { |
| case 0x8070: /* P4G8X Deluxe */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH) |
| switch (dev->subsystem_device) { |
| case 0x80c9: /* PU-DLS */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) |
| switch (dev->subsystem_device) { |
| case 0x1751: /* M2N notebook */ |
| case 0x1821: /* M5N notebook */ |
| case 0x1897: /* A6L notebook */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
| switch (dev->subsystem_device) { |
| case 0x184b: /* W1N notebook */ |
| case 0x186a: /* M6Ne notebook */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) |
| switch (dev->subsystem_device) { |
| case 0x80f2: /* P4P800-X */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) |
| switch (dev->subsystem_device) { |
| case 0x1882: /* M6V notebook */ |
| case 0x1977: /* A6VA notebook */ |
| asus_hides_smbus = 1; |
| } |
| } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { |
| if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
| switch (dev->subsystem_device) { |
| case 0x088C: /* HP Compaq nc8000 */ |
| case 0x0890: /* HP Compaq nc6000 */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) |
| switch (dev->subsystem_device) { |
| case 0x12bc: /* HP D330L */ |
| case 0x12bd: /* HP D530 */ |
| case 0x006a: /* HP Compaq nx9500 */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) |
| switch (dev->subsystem_device) { |
| case 0x12bf: /* HP xw4100 */ |
| asus_hides_smbus = 1; |
| } |
| } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { |
| if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
| switch (dev->subsystem_device) { |
| case 0xC00C: /* Samsung P35 notebook */ |
| asus_hides_smbus = 1; |
| } |
| } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { |
| if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) |
| switch (dev->subsystem_device) { |
| case 0x0058: /* Compaq Evo N620c */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) |
| switch (dev->subsystem_device) { |
| case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ |
| /* Motherboard doesn't have Host bridge |
| * subvendor/subdevice IDs, therefore checking |
| * its on-board VGA controller */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2) |
| switch (dev->subsystem_device) { |
| case 0x00b8: /* Compaq Evo D510 CMT */ |
| case 0x00b9: /* Compaq Evo D510 SFF */ |
| case 0x00ba: /* Compaq Evo D510 USDT */ |
| /* Motherboard doesn't have Host bridge |
| * subvendor/subdevice IDs and on-board VGA |
| * controller is disabled if an AGP card is |
| * inserted, therefore checking USB UHCI |
| * Controller #1 */ |
| asus_hides_smbus = 1; |
| } |
| else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) |
| switch (dev->subsystem_device) { |
| case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ |
| /* Motherboard doesn't have host bridge |
| * subvendor/subdevice IDs, therefore checking |
| * its on-board VGA controller */ |
| asus_hides_smbus = 1; |
| } |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); |
| |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); |
| |
| static void asus_hides_smbus_lpc(struct pci_dev *dev) |
| { |
| u16 val; |
| |
| if (likely(!asus_hides_smbus)) |
| return; |
| |
| pci_read_config_word(dev, 0xF2, &val); |
| if (val & 0x8) { |
| pci_write_config_word(dev, 0xF2, val & (~0x8)); |
| pci_read_config_word(dev, 0xF2, &val); |
| if (val & 0x8) |
| pci_info(dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", |
| val); |
| else |
| pci_info(dev, "Enabled i801 SMBus device\n"); |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); |
| |
| /* It appears we just have one such device. If not, we have a warning */ |
| static void __iomem *asus_rcba_base; |
| static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) |
| { |
| u32 rcba; |
| |
| if (likely(!asus_hides_smbus)) |
| return; |
| WARN_ON(asus_rcba_base); |
| |
| pci_read_config_dword(dev, 0xF0, &rcba); |
| /* use bits 31:14, 16 kB aligned */ |
| asus_rcba_base = ioremap(rcba & 0xFFFFC000, 0x4000); |
| if (asus_rcba_base == NULL) |
| return; |
| } |
| |
| static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) |
| { |
| u32 val; |
| |
| if (likely(!asus_hides_smbus || !asus_rcba_base)) |
| return; |
| |
| /* read the Function Disable register, dword mode only */ |
| val = readl(asus_rcba_base + 0x3418); |
| |
| /* enable the SMBus device */ |
| writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); |
| } |
| |
| static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) |
| { |
| if (likely(!asus_hides_smbus || !asus_rcba_base)) |
| return; |
| |
| iounmap(asus_rcba_base); |
| asus_rcba_base = NULL; |
| pci_info(dev, "Enabled ICH6/i801 SMBus device\n"); |
| } |
| |
| static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) |
| { |
| asus_hides_smbus_lpc_ich6_suspend(dev); |
| asus_hides_smbus_lpc_ich6_resume_early(dev); |
| asus_hides_smbus_lpc_ich6_resume(dev); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); |
| DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); |
| |
| /* SiS 96x south bridge: BIOS typically hides SMBus device... */ |
| static void quirk_sis_96x_smbus(struct pci_dev *dev) |
| { |
| u8 val = 0; |
| pci_read_config_byte(dev, 0x77, &val); |
| if (val & 0x10) { |
| pci_info(dev, "Enabling SiS 96x SMBus\n"); |
| pci_write_config_byte(dev, 0x77, val & ~0x10); |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); |
| |
| /* |
| * ... This is further complicated by the fact that some SiS96x south |
| * bridges pretend to be 85C503/5513 instead. In that case see if we |
| * spotted a compatible north bridge to make sure. |
| * (pci_find_device() doesn't work yet) |
| * |
| * We can also enable the sis96x bit in the discovery register.. |
| */ |
| #define SIS_DETECT_REGISTER 0x40 |
| |
| static void quirk_sis_503(struct pci_dev *dev) |
| { |
| u8 reg; |
| u16 devid; |
| |
| pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); |
| pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); |
| pci_read_config_word(dev, PCI_DEVICE_ID, &devid); |
| if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { |
| pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); |
| return; |
| } |
| |
| /* |
| * Ok, it now shows up as a 96x. Run the 96x quirk by hand in case |
| * it has already been processed. (Depends on link order, which is |
| * apparently not guaranteed) |
| */ |
| dev->device = devid; |
| quirk_sis_96x_smbus(dev); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); |
| |
| /* |
| * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller |
| * and MC97 modem controller are disabled when a second PCI soundcard is |
| * present. This patch, tweaking the VT8237 ISA bridge, enables them. |
| * -- bjd |
| */ |
| static void asus_hides_ac97_lpc(struct pci_dev *dev) |
| { |
| u8 val; |
| int asus_hides_ac97 = 0; |
| |
| if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { |
| if (dev->device == PCI_DEVICE_ID_VIA_8237) |
| asus_hides_ac97 = 1; |
| } |
| |
| if (!asus_hides_ac97) |
| return; |
| |
| pci_read_config_byte(dev, 0x50, &val); |
| if (val & 0xc0) { |
| pci_write_config_byte(dev, 0x50, val & (~0xc0)); |
| pci_read_config_byte(dev, 0x50, &val); |
| if (val & 0xc0) |
| pci_info(dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", |
| val); |
| else |
| pci_info(dev, "Enabled onboard AC97/MC97 devices\n"); |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); |
| |
| #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) |
| |
| /* |
| * If we are using libata we can drive this chip properly but must do this |
| * early on to make the additional device appear during the PCI scanning. |
| */ |
| static void quirk_jmicron_ata(struct pci_dev *pdev) |
| { |
| u32 conf1, conf5, class; |
| u8 hdr; |
| |
| /* Only poke fn 0 */ |
| if (PCI_FUNC(pdev->devfn)) |
| return; |
| |
| pci_read_config_dword(pdev, 0x40, &conf1); |
| pci_read_config_dword(pdev, 0x80, &conf5); |
| |
| conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ |
| conf5 &= ~(1 << 24); /* Clear bit 24 */ |
| |
| switch (pdev->device) { |
| case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ |
| case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ |
| case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */ |
| /* The controller should be in single function ahci mode */ |
| conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ |
| break; |
| |
| case PCI_DEVICE_ID_JMICRON_JMB365: |
| case PCI_DEVICE_ID_JMICRON_JMB366: |
| /* Redirect IDE second PATA port to the right spot */ |
| conf5 |= (1 << 24); |
| fallthrough; |
| case PCI_DEVICE_ID_JMICRON_JMB361: |
| case PCI_DEVICE_ID_JMICRON_JMB363: |
| case PCI_DEVICE_ID_JMICRON_JMB369: |
| /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ |
| /* Set the class codes correctly and then direct IDE 0 */ |
| conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ |
| break; |
| |
| case PCI_DEVICE_ID_JMICRON_JMB368: |
| /* The controller should be in single function IDE mode */ |
| conf1 |= 0x00C00000; /* Set 22, 23 */ |
| break; |
| } |
| |
| pci_write_config_dword(pdev, 0x40, conf1); |
| pci_write_config_dword(pdev, 0x80, conf5); |
| |
| /* Update pdev accordingly */ |
| pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); |
| pdev->hdr_type = hdr & 0x7f; |
| pdev->multifunction = !!(hdr & 0x80); |
| |
| pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class); |
| pdev->class = class >> 8; |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); |
| |
| #endif |
| |
| static void quirk_jmicron_async_suspend(struct pci_dev *dev) |
| { |
| if (dev->multifunction) { |
| device_disable_async_suspend(&dev->dev); |
| pci_info(dev, "async suspend disabled to avoid multi-function power-on ordering issue\n"); |
| } |
| } |
| DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend); |
| DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend); |
| |
| #ifdef CONFIG_X86_IO_APIC |
| static void quirk_alder_ioapic(struct pci_dev *pdev) |
| { |
| int i; |
| |
| if ((pdev->class >> 8) != 0xff00) |
| return; |
| |
| /* |
| * The first BAR is the location of the IO-APIC... we must |
| * not touch this (and it's already covered by the fixmap), so |
| * forcibly insert it into the resource tree. |
| */ |
| if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) |
| insert_resource(&iomem_resource, &pdev->resource[0]); |
| |
| /* |
| * The next five BARs all seem to be rubbish, so just clean |
| * them out. |
| */ |
| for (i = 1; i < PCI_STD_NUM_BARS; i++) |
| memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); |
| #endif |
| |
| static void quirk_no_msi(struct pci_dev *dev) |
| { |
| pci_info(dev, "avoiding MSI to work around a hardware defect\n"); |
| dev->no_msi = 1; |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4386, quirk_no_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4387, quirk_no_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4388, quirk_no_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4389, quirk_no_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x438a, quirk_no_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x438b, quirk_no_msi); |
| |
| static void quirk_pcie_mch(struct pci_dev *pdev) |
| { |
| pdev->no_msi = 1; |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch); |
| |
| DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, PCI_CLASS_BRIDGE_PCI, 8, quirk_pcie_mch); |
| |
| /* |
| * HiSilicon KunPeng920 and KunPeng930 have devices appear as PCI but are |
| * actually on the AMBA bus. These fake PCI devices can support SVA via |
| * SMMU stall feature, by setting dma-can-stall for ACPI platforms. |
| * |
| * Normally stalling must not be enabled for PCI devices, since it would |
| * break the PCI requirement for free-flowing writes and may lead to |
| * deadlock. We expect PCI devices to support ATS and PRI if they want to |
| * be fault-tolerant, so there's no ACPI binding to describe anything else, |
| * even when a "PCI" device turns out to be a regular old SoC device |
| * dressed up as a RCiEP and normal rules don't apply. |
| */ |
| static void quirk_huawei_pcie_sva(struct pci_dev *pdev) |
| { |
| struct property_entry properties[] = { |
| PROPERTY_ENTRY_BOOL("dma-can-stall"), |
| {}, |
| }; |
| |
| if (pdev->revision != 0x21 && pdev->revision != 0x30) |
| return; |
| |
| pdev->pasid_no_tlp = 1; |
| |
| /* |
| * Set the dma-can-stall property on ACPI platforms. Device tree |
| * can set it directly. |
| */ |
| if (!pdev->dev.of_node && |
| device_create_managed_software_node(&pdev->dev, properties, NULL)) |
| pci_warn(pdev, "could not add stall property"); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa250, quirk_huawei_pcie_sva); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa251, quirk_huawei_pcie_sva); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_sva); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva); |
| |
| /* |
| * It's possible for the MSI to get corrupted if SHPC and ACPI are used |
| * together on certain PXH-based systems. |
| */ |
| static void quirk_pcie_pxh(struct pci_dev *dev) |
| { |
| dev->no_msi = 1; |
| pci_warn(dev, "PXH quirk detected; SHPC device MSI disabled\n"); |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); |
| |
| /* |
| * Some Intel PCI Express chipsets have trouble with downstream device |
| * power management. |
| */ |
| static void quirk_intel_pcie_pm(struct pci_dev *dev) |
| { |
| pci_pm_d3hot_delay = 120; |
| dev->no_d1d2 = 1; |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); |
| |
| static void quirk_d3hot_delay(struct pci_dev *dev, unsigned int delay) |
| { |
| if (dev->d3hot_delay >= delay) |
| return; |
| |
| dev->d3hot_delay = delay; |
| pci_info(dev, "extending delay after power-on from D3hot to %d msec\n", |
| dev->d3hot_delay); |
| } |
| |
| static void quirk_radeon_pm(struct pci_dev *dev) |
| { |
| if (dev->subsystem_vendor == PCI_VENDOR_ID_APPLE && |
| dev->subsystem_device == 0x00e2) |
| quirk_d3hot_delay(dev, 20); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6741, quirk_radeon_pm); |
| |
| /* |
| * Ryzen5/7 XHCI controllers fail upon resume from runtime suspend or s2idle. |
| * https://bugzilla.kernel.org/show_bug.cgi?id=205587 |
| * |
| * The kernel attempts to transition these devices to D3cold, but that seems |
| * to be ineffective on the platforms in question; the PCI device appears to |
| * remain on in D3hot state. The D3hot-to-D0 transition then requires an |
| * extended delay in order to succeed. |
| */ |
| static void quirk_ryzen_xhci_d3hot(struct pci_dev *dev) |
| { |
| quirk_d3hot_delay(dev, 20); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e0, quirk_ryzen_xhci_d3hot); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e1, quirk_ryzen_xhci_d3hot); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x1639, quirk_ryzen_xhci_d3hot); |
| |
| #ifdef CONFIG_X86_IO_APIC |
| static int dmi_disable_ioapicreroute(const struct dmi_system_id *d) |
| { |
| noioapicreroute = 1; |
| pr_info("%s detected: disable boot interrupt reroute\n", d->ident); |
| |
| return 0; |
| } |
| |
| static const struct dmi_system_id boot_interrupt_dmi_table[] = { |
| /* |
| * Systems to exclude from boot interrupt reroute quirks |
| */ |
| { |
| .callback = dmi_disable_ioapicreroute, |
| .ident = "ASUSTek Computer INC. M2N-LR", |
| .matches = { |
| DMI_MATCH(DMI_SYS_VENDOR, "ASUSTek Computer INC."), |
| DMI_MATCH(DMI_PRODUCT_NAME, "M2N-LR"), |
| }, |
| }, |
| {} |
| }; |
| |
| /* |
| * Boot interrupts on some chipsets cannot be turned off. For these chipsets, |
| * remap the original interrupt in the Linux kernel to the boot interrupt, so |
| * that a PCI device's interrupt handler is installed on the boot interrupt |
| * line instead. |
| */ |
| static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) |
| { |
| dmi_check_system(boot_interrupt_dmi_table); |
| if (noioapicquirk || noioapicreroute) |
| return; |
| |
| dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; |
| pci_info(dev, "rerouting interrupts for [%04x:%04x]\n", |
| dev->vendor, dev->device); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); |
| |
| /* |
| * On some chipsets we can disable the generation of legacy INTx boot |
| * interrupts. |
| */ |
| |
| /* |
| * IO-APIC1 on 6300ESB generates boot interrupts, see Intel order no |
| * 300641-004US, section 5.7.3. |
| * |
| * Core IO on Xeon E5 1600/2600/4600, see Intel order no 326509-003. |
| * Core IO on Xeon E5 v2, see Intel order no 329188-003. |
| * Core IO on Xeon E7 v2, see Intel order no 329595-002. |
| * Core IO on Xeon E5 v3, see Intel order no 330784-003. |
| * Core IO on Xeon E7 v3, see Intel order no 332315-001US. |
| * Core IO on Xeon E5 v4, see Intel order no 333810-002US. |
| * Core IO on Xeon E7 v4, see Intel order no 332315-001US. |
| * Core IO on Xeon D-1500, see Intel order no 332051-001. |
| * Core IO on Xeon Scalable, see Intel order no 610950. |
| */ |
| #define INTEL_6300_IOAPIC_ABAR 0x40 /* Bus 0, Dev 29, Func 5 */ |
| #define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) |
| |
| #define INTEL_CIPINTRC_CFG_OFFSET 0x14C /* Bus 0, Dev 5, Func 0 */ |
| #define INTEL_CIPINTRC_DIS_INTX_ICH (1<<25) |
| |
| static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) |
| { |
| u16 pci_config_word; |
| u32 pci_config_dword; |
| |
| if (noioapicquirk) |
| return; |
| |
| switch (dev->device) { |
| case PCI_DEVICE_ID_INTEL_ESB_10: |
| pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, |
| &pci_config_word); |
| pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; |
| pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, |
| pci_config_word); |
| break; |
| case 0x3c28: /* Xeon E5 1600/2600/4600 */ |
| case 0x0e28: /* Xeon E5/E7 V2 */ |
| case 0x2f28: /* Xeon E5/E7 V3,V4 */ |
| case 0x6f28: /* Xeon D-1500 */ |
| case 0x2034: /* Xeon Scalable Family */ |
| pci_read_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET, |
| &pci_config_dword); |
| pci_config_dword |= INTEL_CIPINTRC_DIS_INTX_ICH; |
| pci_write_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET, |
| pci_config_dword); |
| break; |
| default: |
| return; |
| } |
| pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n", |
| dev->vendor, dev->device); |
| } |
| /* |
| * Device 29 Func 5 Device IDs of IO-APIC |
| * containing ABAR—APIC1 Alternate Base Address Register |
| */ |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, |
| quirk_disable_intel_boot_interrupt); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, |
| quirk_disable_intel_boot_interrupt); |
| |
| /* |
| * Device 5 Func 0 Device IDs of Core IO modules/hubs |
| * containing Coherent Interface Protocol Interrupt Control |
| * |
| * Device IDs obtained from volume 2 datasheets of commented |
| * families above. |
| */ |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x3c28, |
| quirk_disable_intel_boot_interrupt); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0e28, |
| quirk_disable_intel_boot_interrupt); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2f28, |
| quirk_disable_intel_boot_interrupt); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x6f28, |
| quirk_disable_intel_boot_interrupt); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2034, |
| quirk_disable_intel_boot_interrupt); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x3c28, |
| quirk_disable_intel_boot_interrupt); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x0e28, |
| quirk_disable_intel_boot_interrupt); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x2f28, |
| quirk_disable_intel_boot_interrupt); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x6f28, |
| quirk_disable_intel_boot_interrupt); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x2034, |
| quirk_disable_intel_boot_interrupt); |
| |
| /* Disable boot interrupts on HT-1000 */ |
| #define BC_HT1000_FEATURE_REG 0x64 |
| #define BC_HT1000_PIC_REGS_ENABLE (1<<0) |
| #define BC_HT1000_MAP_IDX 0xC00 |
| #define BC_HT1000_MAP_DATA 0xC01 |
| |
| static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) |
| { |
| u32 pci_config_dword; |
| u8 irq; |
| |
| if (noioapicquirk) |
| return; |
| |
| pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); |
| pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | |
| BC_HT1000_PIC_REGS_ENABLE); |
| |
| for (irq = 0x10; irq < 0x10 + 32; irq++) { |
| outb(irq, BC_HT1000_MAP_IDX); |
| outb(0x00, BC_HT1000_MAP_DATA); |
| } |
| |
| pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); |
| |
| pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n", |
| dev->vendor, dev->device); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); |
| |
| /* Disable boot interrupts on AMD and ATI chipsets */ |
| |
| /* |
| * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 |
| * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode |
| * (due to an erratum). |
| */ |
| #define AMD_813X_MISC 0x40 |
| #define AMD_813X_NOIOAMODE (1<<0) |
| #define AMD_813X_REV_B1 0x12 |
| #define AMD_813X_REV_B2 0x13 |
| |
| static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) |
| { |
| u32 pci_config_dword; |
| |
| if (noioapicquirk) |
| return; |
| if ((dev->revision == AMD_813X_REV_B1) || |
| (dev->revision == AMD_813X_REV_B2)) |
| return; |
| |
| pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); |
| pci_config_dword &= ~AMD_813X_NOIOAMODE; |
| pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); |
| |
| pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n", |
| dev->vendor, dev->device); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); |
| |
| #define AMD_8111_PCI_IRQ_ROUTING 0x56 |
| |
| static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) |
| { |
| u16 pci_config_word; |
| |
| if (noioapicquirk) |
| return; |
| |
| pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); |
| if (!pci_config_word) { |
| pci_info(dev, "boot interrupts on device [%04x:%04x] already disabled\n", |
| dev->vendor, dev->device); |
| return; |
| } |
| pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); |
| pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n", |
| dev->vendor, dev->device); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); |
| DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); |
| #endif /* CONFIG_X86_IO_APIC */ |
| |
| /* |
| * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size |
| * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. |
| * Re-allocate the region if needed... |
| */ |
| static void quirk_tc86c001_ide(struct pci_dev *dev) |
| { |
| struct resource *r = &dev->resource[0]; |
| |
| if (r->start & 0x8) { |
| r->flags |= IORESOURCE_UNSET; |
| r->start = 0; |
| r->end = 0xf; |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, |
| PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, |
| quirk_tc86c001_ide); |
| |
| /* |
| * PLX PCI 9050 PCI Target bridge controller has an erratum that prevents the |
| * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o) |
| * being read correctly if bit 7 of the base address is set. |
| * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128). |
| * Re-allocate the regions to a 256-byte boundary if necessary. |
| */ |
| static void quirk_plx_pci9050(struct pci_dev *dev) |
| { |
| unsigned int bar; |
| |
| /* Fixed in revision 2 (PCI 9052). */ |
| if (dev->revision >= 2) |
| return; |
| for (bar = 0; bar <= 1; bar++) |
| if (pci_resource_len(dev, bar) == 0x80 && |
| (pci_resource_start(dev, bar) & 0x80)) { |
| struct resource *r = &dev->resource[bar]; |
| pci_info(dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", |
| bar); |
| r->flags |= IORESOURCE_UNSET; |
| r->start = 0; |
| r->end = 0xff; |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, |
| quirk_plx_pci9050); |
| /* |
| * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others) |
| * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b, |
| * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c, |
| * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b. |
| * |
| * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq" |
| * driver. |
| */ |
| DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050); |
| DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050); |
| |
| static void quirk_netmos(struct pci_dev *dev) |
| { |
| unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; |
| unsigned int num_serial = dev->subsystem_device & 0xf; |
| |
| /* |
| * These Netmos parts are multiport serial devices with optional |
| * parallel ports. Even when parallel ports are present, they |
| * are identified as class SERIAL, which means the serial driver |
| * will claim them. To prevent this, mark them as class OTHER. |
| * These combo devices should be claimed by parport_serial. |
| * |
| * The subdevice ID is of the form 0x00PS, where <P> is the number |
| * of parallel ports and <S> is the number of serial ports. |
| */ |
| switch (dev->device) { |
| case PCI_DEVICE_ID_NETMOS_9835: |
| /* Well, this rule doesn't hold for the following 9835 device */ |
| if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && |
| dev->subsystem_device == 0x0299) |
| return; |
| fallthrough; |
| case PCI_DEVICE_ID_NETMOS_9735: |
| case PCI_DEVICE_ID_NETMOS_9745: |
| case PCI_DEVICE_ID_NETMOS_9845: |
| case PCI_DEVICE_ID_NETMOS_9855: |
| if (num_parallel) { |
| pci_info(dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n", |
| dev->device, num_parallel, num_serial); |
| dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | |
| (dev->class & 0xff); |
| } |
| } |
| } |
| DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, |
| PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); |
| |
| static void quirk_e100_interrupt(struct pci_dev *dev) |
| { |
| u16 command, pmcsr; |
| u8 __iomem *csr; |
| u8 cmd_hi; |
| |
| switch (dev->device) { |
| /* PCI IDs taken from drivers/net/e100.c */ |
| case 0x1029: |
| case 0x1030 ... 0x1034: |
| case 0x1038 ... 0x103E: |
| case 0x1050 ... 0x1057: |
| case 0x1059: |
| case 0x1064 ... 0x106B: |
| case 0x1091 ... 0x1095: |
| case 0x1209: |
| case 0x1229: |
| case 0x2449: |
| case 0x2459: |
| case 0x245D: |
| case 0x27DC: |
| break; |
| default: |
| return; |
| } |
| |
| /* |
| * Some firmware hands off the e100 with interrupts enabled, |
| * which can cause a flood of interrupts if packets are |
| * received before the driver attaches to the device. So |
| * disable all e100 interrupts here. The driver will |
| * re-enable them when it's ready. |
| */ |
| pci_read_config_word(dev, PCI_COMMAND, &command); |
| |
| if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) |
| return; |
| |
| /* |
| * Check that the device is in the D0 power state. If it's not, |
| * there is no point to look any further. |
| */ |
| if (dev->pm_cap) { |
| pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); |
| if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) |
| return; |
| } |
| |
| /* Convert from PCI bus to resource space. */ |
| csr = ioremap(pci_resource_start(dev, 0), 8); |
| if (!csr) { |
| pci_warn(dev, "Can't map e100 registers\n"); |
| return; |
| } |
| |
| cmd_hi = readb(csr + 3); |
| if (cmd_hi == 0) { |
| pci_warn(dev, "Firmware left e100 interrupts enabled; disabling\n"); |
| writeb(1, csr + 3); |
| } |
| |
| iounmap(csr); |
| } |
| DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, |
| PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt); |
| |
| /* |
| * The 82575 and 82598 may experience data corruption issues when transitioning |
| * out of L0S. To prevent this we need to disable L0S on the PCIe link. |
| */ |
| static void quirk_disable_aspm_l0s(struct pci_dev *dev) |
| { |
| pci_info(dev, "Disabling L0s\n"); |
| pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); |
| |
| static void quirk_disable_aspm_l0s_l1(struct pci_dev *dev) |
| { |
| pci_info(dev, "Disabling ASPM L0s/L1\n"); |
| pci_disable_link_state(dev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1); |
| } |
| |
| /* |
| * ASM1083/1085 PCIe-PCI bridge devices cause AER timeout errors on the |
| * upstream PCIe root port when ASPM is enabled. At least L0s mode is affected; |
| * disable both L0s and L1 for now to be safe. |
| */ |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x1080, quirk_disable_aspm_l0s_l1); |
| |
| /* |
| * Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain |
| * Link bit cleared after starting the link retrain process to allow this |
| * process to finish. |
| * |
| * Affected devices: PI7C9X110, PI7C9X111SL, PI7C9X130. See also the |
| * Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf. |
| */ |
| static void quirk_enable_clear_retrain_link(struct pci_dev *dev) |
| { |
| dev->clear_retrain_link = 1; |
| pci_info(dev, "Enable PCIe Retrain Link quirk\n"); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PERICOM, 0xe110, quirk_enable_clear_retrain_link); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PERICOM, 0xe111, quirk_enable_clear_retrain_link); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PERICOM, 0xe130, quirk_enable_clear_retrain_link); |
| |
| static void fixup_rev1_53c810(struct pci_dev *dev) |
| { |
| u32 class = dev->class; |
| |
| /* |
| * rev 1 ncr53c810 chips don't set the class at all which means |
| * they don't get their resources remapped. Fix that here. |
| */ |
| if (class) |
| return; |
| |
| dev->class = PCI_CLASS_STORAGE_SCSI << 8; |
| pci_info(dev, "NCR 53c810 rev 1 PCI class overridden (%#08x -> %#08x)\n", |
| class, dev->class); |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); |
| |
| /* Enable 1k I/O space granularity on the Intel P64H2 */ |
| static void quirk_p64h2_1k_io(struct pci_dev *dev) |
| { |
| u16 en1k; |
| |
| pci_read_config_word(dev, 0x40, &en1k); |
| |
| if (en1k & 0x200) { |
| pci_info(dev, "Enable I/O Space to 1KB granularity\n"); |
| dev->io_window_1k = 1; |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); |
| |
| /* |
| * Under some circumstances, AER is not linked with extended capabilities. |
| * Force it to be linked by setting the corresponding control bit in the |
| * config space. |
| */ |
| static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) |
| { |
| uint8_t b; |
| |
| if (pci_read_config_byte(dev, 0xf41, &b) == 0) { |
| if (!(b & 0x20)) { |
| pci_write_config_byte(dev, 0xf41, b | 0x20); |
| pci_info(dev, "Linking AER extended capability\n"); |
| } |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, |
| quirk_nvidia_ck804_pcie_aer_ext_cap); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, |
| quirk_nvidia_ck804_pcie_aer_ext_cap); |
| |
| static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) |
| { |
| /* |
| * Disable PCI Bus Parking and PCI Master read caching on CX700 |
| * which causes unspecified timing errors with a VT6212L on the PCI |
| * bus leading to USB2.0 packet loss. |
| * |
| * This quirk is only enabled if a second (on the external PCI bus) |
| * VT6212L is found -- the CX700 core itself also contains a USB |
| * host controller with the same PCI ID as the VT6212L. |
| */ |
| |
| /* Count VT6212L instances */ |
| struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA, |
| PCI_DEVICE_ID_VIA_8235_USB_2, NULL); |
| uint8_t b; |
| |
| /* |
| * p should contain the first (internal) VT6212L -- see if we have |
| * an external one by searching again. |
| */ |
| p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); |
| if (!p) |
| return; |
| pci_dev_put(p); |
| |
| if (pci_read_config_byte(dev, 0x76, &b) == 0) { |
| if (b & 0x40) { |
| /* Turn off PCI Bus Parking */ |
| pci_write_config_byte(dev, 0x76, b ^ 0x40); |
| |
| pci_info(dev, "Disabling VIA CX700 PCI parking\n"); |
| } |
| } |
| |
| if (pci_read_config_byte(dev, 0x72, &b) == 0) { |
| if (b != 0) { |
| /* Turn off PCI Master read caching */ |
| pci_write_config_byte(dev, 0x72, 0x0); |
| |
| /* Set PCI Master Bus time-out to "1x16 PCLK" */ |
| pci_write_config_byte(dev, 0x75, 0x1); |
| |
| /* Disable "Read FIFO Timer" */ |
| pci_write_config_byte(dev, 0x77, 0x0); |
| |
| pci_info(dev, "Disabling VIA CX700 PCI caching\n"); |
| } |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); |
| |
| static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev) |
| { |
| u32 rev; |
| |
| pci_read_config_dword(dev, 0xf4, &rev); |
| |
| /* Only CAP the MRRS if the device is a 5719 A0 */ |
| if (rev == 0x05719000) { |
| int readrq = pcie_get_readrq(dev); |
| if (readrq > 2048) |
| pcie_set_readrq(dev, 2048); |
| } |
| } |
| DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, |
| PCI_DEVICE_ID_TIGON3_5719, |
| quirk_brcm_5719_limit_mrrs); |
| |
| /* |
| * Originally in EDAC sources for i82875P: Intel tells BIOS developers to |
| * hide device 6 which configures the overflow device access containing the |
| * DRBs - this is where we expose device 6. |
| * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm |
| */ |
| static void quirk_unhide_mch_dev6(struct pci_dev *dev) |
| { |
| u8 reg; |
| |
| if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) { |
| pci_info(dev, "Enabling MCH 'Overflow' Device\n"); |
| pci_write_config_byte(dev, 0xF4, reg | 0x02); |
| } |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, |
| quirk_unhide_mch_dev6); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, |
| quirk_unhide_mch_dev6); |
| |
| #ifdef CONFIG_PCI_MSI |
| /* |
| * Some chipsets do not support MSI. We cannot easily rely on setting |
| * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually some |
| * other buses controlled by the chipset even if Linux is not aware of it. |
| * Instead of setting the flag on all buses in the machine, simply disable |
| * MSI globally. |
| */ |
| static void quirk_disable_all_msi(struct pci_dev *dev) |
| { |
| pci_no_msi(); |
| pci_warn(dev, "MSI quirk detected; MSI disabled\n"); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, 0x0761, quirk_disable_all_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SAMSUNG, 0xa5e3, quirk_disable_all_msi); |
| |
| /* Disable MSI on chipsets that are known to not support it */ |
| static void quirk_disable_msi(struct pci_dev *dev) |
| { |
| if (dev->subordinate) { |
| pci_warn(dev, "MSI quirk detected; subordinate MSI disabled\n"); |
| dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi); |
| |
| /* |
| * The APC bridge device in AMD 780 family northbridges has some random |
| * OEM subsystem ID in its vendor ID register (erratum 18), so instead |
| * we use the possible vendor/device IDs of the host bridge for the |
| * declared quirk, and search for the APC bridge by slot number. |
| */ |
| static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge) |
| { |
| struct pci_dev *apc_bridge; |
| |
| apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0)); |
| if (apc_bridge) { |
| if (apc_bridge->device == 0x9602) |
| quirk_disable_msi(apc_bridge); |
| pci_dev_put(apc_bridge); |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi); |
| |
| /* |
| * Go through the list of HyperTransport capabilities and return 1 if a HT |
| * MSI capability is found and enabled. |
| */ |
| static int msi_ht_cap_enabled(struct pci_dev *dev) |
| { |
| int pos, ttl = PCI_FIND_CAP_TTL; |
| |
| pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); |
| while (pos && ttl--) { |
| u8 flags; |
| |
| if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, |
| &flags) == 0) { |
| pci_info(dev, "Found %s HT MSI Mapping\n", |
| flags & HT_MSI_FLAGS_ENABLE ? |
| "enabled" : "disabled"); |
| return (flags & HT_MSI_FLAGS_ENABLE) != 0; |
| } |
| |
| pos = pci_find_next_ht_capability(dev, pos, |
| HT_CAPTYPE_MSI_MAPPING); |
| } |
| return 0; |
| } |
| |
| /* Check the HyperTransport MSI mapping to know whether MSI is enabled or not */ |
| static void quirk_msi_ht_cap(struct pci_dev *dev) |
| { |
| if (!msi_ht_cap_enabled(dev)) |
| quirk_disable_msi(dev); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, |
| quirk_msi_ht_cap); |
| |
| /* |
| * The nVidia CK804 chipset may have 2 HT MSI mappings. MSI is supported |
| * if the MSI capability is set in any of these mappings. |
| */ |
| static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) |
| { |
| struct pci_dev *pdev; |
| |
| /* |
| * Check HT MSI cap on this chipset and the root one. A single one |
| * having MSI is enough to be sure that MSI is supported. |
| */ |
| pdev = pci_get_slot(dev->bus, 0); |
| if (!pdev) |
| return; |
| if (!msi_ht_cap_enabled(pdev)) |
| quirk_msi_ht_cap(dev); |
| pci_dev_put(pdev); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, |
| quirk_nvidia_ck804_msi_ht_cap); |
| |
| /* Force enable MSI mapping capability on HT bridges */ |
| static void ht_enable_msi_mapping(struct pci_dev *dev) |
| { |
| int pos, ttl = PCI_FIND_CAP_TTL; |
| |
| pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); |
| while (pos && ttl--) { |
| u8 flags; |
| |
| if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, |
| &flags) == 0) { |
| pci_info(dev, "Enabling HT MSI Mapping\n"); |
| |
| pci_write_config_byte(dev, pos + HT_MSI_FLAGS, |
| flags | HT_MSI_FLAGS_ENABLE); |
| } |
| pos = pci_find_next_ht_capability(dev, pos, |
| HT_CAPTYPE_MSI_MAPPING); |
| } |
| } |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, |
| PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, |
| ht_enable_msi_mapping); |
| DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, |
| ht_enable_msi_mapping); |
| |
| /* |
| * The P5N32-SLI motherboards from Asus have a problem with MSI |
| * for the MCP55 NIC. It is not yet determined whether the MSI problem |
| * also affects other devices. As for now, turn off MSI for this device. |
| */ |
| static void nvenet_msi_disable(struct pci_dev *dev) |
| { |
| const char *board_name = dmi_get_system_info(DMI_BOARD_NAME); |
| |
| if (board_name && |
| (strstr(board_name, "P5N32-SLI PREMIUM") || |
| strstr(board_name, "P5N32-E SLI"))) { |
| pci_info(dev, "Disabling MSI for MCP55 NIC on P5N32-SLI\n"); |
| dev->no_msi = 1; |
| } |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, |
| PCI_DEVICE_ID_NVIDIA_NVENET_15, |
| nvenet_msi_disable); |
| |
| /* |
| * PCIe spec r6.0 sec 6.1.4.3 says that if MSI/MSI-X is enabled, the device |
| * can't use INTx interrupts. Tegra's PCIe Root Ports don't generate MSI |
| * interrupts for PME and AER events; instead only INTx interrupts are |
| * generated. Though Tegra's PCIe Root Ports can generate MSI interrupts |
| * for other events, since PCIe specification doesn't support using a mix of |
| * INTx and MSI/MSI-X, it is required to disable MSI interrupts to avoid port |
| * service drivers registering their respective ISRs for MSIs. |
| */ |
| static void pci_quirk_nvidia_tegra_disable_rp_msi(struct pci_dev *dev) |
| { |
| dev->no_msi = 1; |
| } |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad0, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad1, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad2, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1c, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1d, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e12, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e13, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0fae, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0faf, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x10e5, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x10e6, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x229a, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x229c, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x229e, |
| PCI_CLASS_BRIDGE_PCI, 8, |
| pci_quirk_nvidia_tegra_disable_rp_msi); |
| |
| /* |
| * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing |
| * config register. This register controls the routing of legacy |
| * interrupts from devices that route through the MCP55. If this register |
| * is misprogrammed, interrupts are only sent to the BSP, unlike |
| * conventional systems where the IRQ is broadcast to all online CPUs. Not |
| * having this register set properly prevents kdump from booting up |
| * properly, so let's make sure that we have it set correctly. |
| * Note that this is an undocumented register. |
| */ |
| static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) |
| { |
| u32 cfg; |
| |
| if (!pci_find_capability(dev, PCI_CAP_ID_HT)) |
| return; |
| |
| pci_read_config_dword(dev, 0x74, &cfg); |
| |
| if (cfg & ((1 << 2) | (1 << 15))) { |
| pr_info("Rewriting IRQ routing register on MCP55\n"); |
| cfg &= ~((1 << 2) | (1 << 15)); |
| pci_write_config_dword(dev, 0x74, cfg); |
| } |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, |
| PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0, |
| nvbridge_check_legacy_irq_routing); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, |
| PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4, |
| nvbridge_check_legacy_irq_routing); |
| |
| static int ht_check_msi_mapping(struct pci_dev *dev) |
| { |
| int pos, ttl = PCI_FIND_CAP_TTL; |
| int found = 0; |
| |
| /* Check if there is HT MSI cap or enabled on this device */ |
| pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); |
| while (pos && ttl--) { |
| u8 flags; |
| |
| if (found < 1) |
| found = 1; |
| if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, |
| &flags) == 0) { |
| if (flags & HT_MSI_FLAGS_ENABLE) { |
| if (found < 2) { |
| found = 2; |
| break; |
| } |
| } |
| } |
| pos = pci_find_next_ht_capability(dev, pos, |
| HT_CAPTYPE_MSI_MAPPING); |
| } |
| |
| return found; |
| } |
| |
| static int host_bridge_with_leaf(struct pci_dev *host_bridge) |
| { |
| struct pci_dev *dev; |
| int pos; |
| int i, dev_no; |
| int found = 0; |
| |
| dev_no = host_bridge->devfn >> 3; |
| for (i = dev_no + 1; i < 0x20; i++) { |
| dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0)); |
| if (!dev) |
| continue; |
| |
| /* found next host bridge? */ |
| pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); |
| if (pos != 0) { |
| pci_dev_put(dev); |
| break; |
| } |
| |
| if (ht_check_msi_mapping(dev)) { |
| found = 1; |
| pci_dev_put(dev); |
| break; |
| } |
| pci_dev_put(dev); |
| } |
| |
| return found; |
| } |
| |
| #define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */ |
| #define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */ |
| |
| static int is_end_of_ht_chain(struct pci_dev *dev) |
| { |
| int pos, ctrl_off; |
| int end = 0; |
| u16 flags, ctrl; |
| |
| pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); |
| |
| if (!pos) |
| goto out; |
| |
| pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags); |
| |
| ctrl_off = ((flags >> 10) & 1) ? |
| PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1; |
| pci_read_config_word(dev, pos + ctrl_off, &ctrl); |
| |
| if (ctrl & (1 << 6)) |
| end = 1; |
| |
| out: |
| return end; |
| } |
| |
| static void nv_ht_enable_msi_mapping(struct pci_dev *dev) |
| { |
| struct pci_dev *host_bridge; |
| int pos; |
| int i, dev_no; |
| int found = 0; |
| |
| dev_no = dev->devfn >> 3; |
| for (i = dev_no; i >= 0; i--) { |
| host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); |
| if (!host_bridge) |
| continue; |
| |
| pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); |
| if (pos != 0) { |
| found = 1; |
| break; |
| } |
| pci_dev_put(host_bridge); |
| } |
| |
| if (!found) |
| return; |
| |
| /* don't enable end_device/host_bridge with leaf directly here */ |
| if (host_bridge == dev && is_end_of_ht_chain(host_bridge) && |
| host_bridge_with_leaf(host_bridge)) |
| goto out; |
| |
| /* root did that ! */ |
| if (msi_ht_cap_enabled(host_bridge)) |
| goto out; |
| |
| ht_enable_msi_mapping(dev); |
| |
| out: |
| pci_dev_put(host_bridge); |
| } |
| |
| static void ht_disable_msi_mapping(struct pci_dev *dev) |
| { |
| int pos, ttl = PCI_FIND_CAP_TTL; |
| |
| pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); |
| while (pos && ttl--) { |
| u8 flags; |
| |
| if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, |
| &flags) == 0) { |
| pci_info(dev, "Disabling HT MSI Mapping\n"); |
| |
| pci_write_config_byte(dev, pos + HT_MSI_FLAGS, |
| flags & ~HT_MSI_FLAGS_ENABLE); |
| } |
| pos = pci_find_next_ht_capability(dev, pos, |
| HT_CAPTYPE_MSI_MAPPING); |
| } |
| } |
| |
| static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all) |
| { |
| struct pci_dev *host_bridge; |
| int pos; |
| int found; |
| |
| if (!pci_msi_enabled()) |
| return; |
| |
| /* check if there is HT MSI cap or enabled on this device */ |
| found = ht_check_msi_mapping(dev); |
| |
| /* no HT MSI CAP */ |
| if (found == 0) |
| return; |
| |
| /* |
| * HT MSI mapping should be disabled on devices that are below |
| * a non-Hypertransport host bridge. Locate the host bridge... |
| */ |
| host_bridge = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus), 0, |
| PCI_DEVFN(0, 0)); |
| if (host_bridge == NULL) { |
| pci_warn(dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n"); |
| return; |
| } |
| |
| pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); |
| if (pos != 0) { |
| /* Host bridge is to HT */ |
| if (found == 1) { |
| /* it is not enabled, try to enable it */ |
| if (all) |
| ht_enable_msi_mapping(dev); |
| else |
| nv_ht_enable_msi_mapping(dev); |
| } |
| goto out; |
| } |
| |
| /* HT MSI is not enabled */ |
| if (found == 1) |
| goto out; |
| |
| /* Host bridge is not to HT, disable HT MSI mapping on this device */ |
| ht_disable_msi_mapping(dev); |
| |
| out: |
| pci_dev_put(host_bridge); |
| } |
| |
| static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev) |
| { |
| return __nv_msi_ht_cap_quirk(dev, 1); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); |
| |
| static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) |
| { |
| return __nv_msi_ht_cap_quirk(dev, 0); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); |
| DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); |
| |
| static void quirk_msi_intx_disable_bug(struct pci_dev *dev) |
| { |
| dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; |
| } |
| |
| static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) |
| { |
| struct pci_dev *p; |
| |
| /* |
| * SB700 MSI issue will be fixed at HW level from revision A21; |
| * we need check PCI REVISION ID of SMBus controller to get SB700 |
| * revision. |
| */ |
| p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, |
| NULL); |
| if (!p) |
| return; |
| |
| if ((p->revision < 0x3B) && (p->revision >= 0x30)) |
| dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; |
| pci_dev_put(p); |
| } |
| |
| static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev) |
| { |
| /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */ |
| if (dev->revision < 0x18) { |
| pci_info(dev, "set MSI_INTX_DISABLE_BUG flag\n"); |
| dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; |
| } |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| PCI_DEVICE_ID_TIGON3_5780, |
| quirk_msi_intx_disable_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| PCI_DEVICE_ID_TIGON3_5780S, |
| quirk_msi_intx_disable_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| PCI_DEVICE_ID_TIGON3_5714, |
| quirk_msi_intx_disable_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| PCI_DEVICE_ID_TIGON3_5714S, |
| quirk_msi_intx_disable_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| PCI_DEVICE_ID_TIGON3_5715, |
| quirk_msi_intx_disable_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, |
| PCI_DEVICE_ID_TIGON3_5715S, |
| quirk_msi_intx_disable_bug); |
| |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390, |
| quirk_msi_intx_disable_ati_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391, |
| quirk_msi_intx_disable_ati_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392, |
| quirk_msi_intx_disable_ati_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393, |
| quirk_msi_intx_disable_ati_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394, |
| quirk_msi_intx_disable_ati_bug); |
| |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373, |
| quirk_msi_intx_disable_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, |
| quirk_msi_intx_disable_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, |
| quirk_msi_intx_disable_bug); |
| |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062, |
| quirk_msi_intx_disable_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063, |
| quirk_msi_intx_disable_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060, |
| quirk_msi_intx_disable_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062, |
| quirk_msi_intx_disable_bug); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073, |
|