blob: 76c3d8f6fc3c6e4ed24b9bc4619905bfab08b41d [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* HiSilicon I2C Controller Driver for Kunpeng SoC
*
* Copyright (c) 2021 HiSilicon Technologies Co., Ltd.
*/
#include <linux/bits.h>
#include <linux/bitfield.h>
#include <linux/completion.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/units.h>
#define HISI_I2C_FRAME_CTRL 0x0000
#define HISI_I2C_FRAME_CTRL_SPEED_MODE GENMASK(1, 0)
#define HISI_I2C_FRAME_CTRL_ADDR_TEN BIT(2)
#define HISI_I2C_SLV_ADDR 0x0004
#define HISI_I2C_SLV_ADDR_VAL GENMASK(9, 0)
#define HISI_I2C_SLV_ADDR_GC_S_MODE BIT(10)
#define HISI_I2C_SLV_ADDR_GC_S_EN BIT(11)
#define HISI_I2C_CMD_TXDATA 0x0008
#define HISI_I2C_CMD_TXDATA_DATA GENMASK(7, 0)
#define HISI_I2C_CMD_TXDATA_RW BIT(8)
#define HISI_I2C_CMD_TXDATA_P_EN BIT(9)
#define HISI_I2C_CMD_TXDATA_SR_EN BIT(10)
#define HISI_I2C_RXDATA 0x000c
#define HISI_I2C_RXDATA_DATA GENMASK(7, 0)
#define HISI_I2C_SS_SCL_HCNT 0x0010
#define HISI_I2C_SS_SCL_LCNT 0x0014
#define HISI_I2C_FS_SCL_HCNT 0x0018
#define HISI_I2C_FS_SCL_LCNT 0x001c
#define HISI_I2C_HS_SCL_HCNT 0x0020
#define HISI_I2C_HS_SCL_LCNT 0x0024
#define HISI_I2C_FIFO_CTRL 0x0028
#define HISI_I2C_FIFO_RX_CLR BIT(0)
#define HISI_I2C_FIFO_TX_CLR BIT(1)
#define HISI_I2C_FIFO_RX_AF_THRESH GENMASK(7, 2)
#define HISI_I2C_FIFO_TX_AE_THRESH GENMASK(13, 8)
#define HISI_I2C_FIFO_STATE 0x002c
#define HISI_I2C_FIFO_STATE_RX_RERR BIT(0)
#define HISI_I2C_FIFO_STATE_RX_WERR BIT(1)
#define HISI_I2C_FIFO_STATE_RX_EMPTY BIT(3)
#define HISI_I2C_FIFO_STATE_TX_RERR BIT(6)
#define HISI_I2C_FIFO_STATE_TX_WERR BIT(7)
#define HISI_I2C_FIFO_STATE_TX_FULL BIT(11)
#define HISI_I2C_SDA_HOLD 0x0030
#define HISI_I2C_SDA_HOLD_TX GENMASK(15, 0)
#define HISI_I2C_SDA_HOLD_RX GENMASK(23, 16)
#define HISI_I2C_FS_SPK_LEN 0x0038
#define HISI_I2C_FS_SPK_LEN_CNT GENMASK(7, 0)
#define HISI_I2C_HS_SPK_LEN 0x003c
#define HISI_I2C_HS_SPK_LEN_CNT GENMASK(7, 0)
#define HISI_I2C_INT_MSTAT 0x0044
#define HISI_I2C_INT_CLR 0x0048
#define HISI_I2C_INT_MASK 0x004C
#define HISI_I2C_TRANS_STATE 0x0050
#define HISI_I2C_TRANS_ERR 0x0054
#define HISI_I2C_VERSION 0x0058
#define HISI_I2C_INT_ALL GENMASK(4, 0)
#define HISI_I2C_INT_TRANS_CPLT BIT(0)
#define HISI_I2C_INT_TRANS_ERR BIT(1)
#define HISI_I2C_INT_FIFO_ERR BIT(2)
#define HISI_I2C_INT_RX_FULL BIT(3)
#define HISI_I2C_INT_TX_EMPTY BIT(4)
#define HISI_I2C_INT_ERR \
(HISI_I2C_INT_TRANS_ERR | HISI_I2C_INT_FIFO_ERR)
#define HISI_I2C_STD_SPEED_MODE 0
#define HISI_I2C_FAST_SPEED_MODE 1
#define HISI_I2C_HIGH_SPEED_MODE 2
#define HISI_I2C_TX_FIFO_DEPTH 64
#define HISI_I2C_RX_FIFO_DEPTH 64
#define HISI_I2C_TX_F_AE_THRESH 1
#define HISI_I2C_RX_F_AF_THRESH 60
#define NSEC_TO_CYCLES(ns, clk_rate_khz) \
DIV_ROUND_UP_ULL((clk_rate_khz) * (ns), NSEC_PER_MSEC)
struct hisi_i2c_controller {
struct i2c_adapter adapter;
void __iomem *iobase;
struct device *dev;
int irq;
/* Intermediates for recording the transfer process */
struct completion *completion;
struct i2c_msg *msgs;
int msg_num;
int msg_tx_idx;
int buf_tx_idx;
int msg_rx_idx;
int buf_rx_idx;
u16 tar_addr;
u32 xfer_err;
/* I2C bus configuration */
struct i2c_timings t;
u32 clk_rate_khz;
u32 spk_len;
};
static void hisi_i2c_enable_int(struct hisi_i2c_controller *ctlr, u32 mask)
{
writel_relaxed(mask, ctlr->iobase + HISI_I2C_INT_MASK);
}
static void hisi_i2c_disable_int(struct hisi_i2c_controller *ctlr, u32 mask)
{
writel_relaxed((~mask) & HISI_I2C_INT_ALL, ctlr->iobase + HISI_I2C_INT_MASK);
}
static void hisi_i2c_clear_int(struct hisi_i2c_controller *ctlr, u32 mask)
{
writel_relaxed(mask, ctlr->iobase + HISI_I2C_INT_CLR);
}
static void hisi_i2c_handle_errors(struct hisi_i2c_controller *ctlr)
{
u32 int_err = ctlr->xfer_err, reg;
if (int_err & HISI_I2C_INT_FIFO_ERR) {
reg = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
if (reg & HISI_I2C_FIFO_STATE_RX_RERR)
dev_err(ctlr->dev, "rx fifo error read\n");
if (reg & HISI_I2C_FIFO_STATE_RX_WERR)
dev_err(ctlr->dev, "rx fifo error write\n");
if (reg & HISI_I2C_FIFO_STATE_TX_RERR)
dev_err(ctlr->dev, "tx fifo error read\n");
if (reg & HISI_I2C_FIFO_STATE_TX_WERR)
dev_err(ctlr->dev, "tx fifo error write\n");
}
}
static int hisi_i2c_start_xfer(struct hisi_i2c_controller *ctlr)
{
struct i2c_msg *msg = ctlr->msgs;
u32 reg;
reg = readl(ctlr->iobase + HISI_I2C_FRAME_CTRL);
reg &= ~HISI_I2C_FRAME_CTRL_ADDR_TEN;
if (msg->flags & I2C_M_TEN)
reg |= HISI_I2C_FRAME_CTRL_ADDR_TEN;
writel(reg, ctlr->iobase + HISI_I2C_FRAME_CTRL);
reg = readl(ctlr->iobase + HISI_I2C_SLV_ADDR);
reg &= ~HISI_I2C_SLV_ADDR_VAL;
reg |= FIELD_PREP(HISI_I2C_SLV_ADDR_VAL, msg->addr);
writel(reg, ctlr->iobase + HISI_I2C_SLV_ADDR);
reg = readl(ctlr->iobase + HISI_I2C_FIFO_CTRL);
reg |= HISI_I2C_FIFO_RX_CLR | HISI_I2C_FIFO_TX_CLR;
writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
reg &= ~(HISI_I2C_FIFO_RX_CLR | HISI_I2C_FIFO_TX_CLR);
writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
hisi_i2c_enable_int(ctlr, HISI_I2C_INT_ALL);
return 0;
}
static void hisi_i2c_reset_xfer(struct hisi_i2c_controller *ctlr)
{
ctlr->msg_num = 0;
ctlr->xfer_err = 0;
ctlr->msg_tx_idx = 0;
ctlr->msg_rx_idx = 0;
ctlr->buf_tx_idx = 0;
ctlr->buf_rx_idx = 0;
}
/*
* Initialize the transfer information and start the I2C bus transfer.
* We only configure the transfer and do some pre/post works here, and
* wait for the transfer done. The major transfer process is performed
* in the IRQ handler.
*/
static int hisi_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int num)
{
struct hisi_i2c_controller *ctlr = i2c_get_adapdata(adap);
DECLARE_COMPLETION_ONSTACK(done);
int ret = num;
hisi_i2c_reset_xfer(ctlr);
ctlr->completion = &done;
ctlr->msg_num = num;
ctlr->msgs = msgs;
hisi_i2c_start_xfer(ctlr);
if (!wait_for_completion_timeout(ctlr->completion, adap->timeout)) {
hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
synchronize_irq(ctlr->irq);
i2c_recover_bus(&ctlr->adapter);
dev_err(ctlr->dev, "bus transfer timeout\n");
ret = -EIO;
}
if (ctlr->xfer_err) {
hisi_i2c_handle_errors(ctlr);
ret = -EIO;
}
hisi_i2c_reset_xfer(ctlr);
ctlr->completion = NULL;
return ret;
}
static u32 hisi_i2c_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
}
static const struct i2c_algorithm hisi_i2c_algo = {
.master_xfer = hisi_i2c_master_xfer,
.functionality = hisi_i2c_functionality,
};
static int hisi_i2c_read_rx_fifo(struct hisi_i2c_controller *ctlr)
{
struct i2c_msg *cur_msg;
u32 fifo_state;
while (ctlr->msg_rx_idx < ctlr->msg_num) {
cur_msg = ctlr->msgs + ctlr->msg_rx_idx;
if (!(cur_msg->flags & I2C_M_RD)) {
ctlr->msg_rx_idx++;
continue;
}
fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
while (!(fifo_state & HISI_I2C_FIFO_STATE_RX_EMPTY) &&
ctlr->buf_rx_idx < cur_msg->len) {
cur_msg->buf[ctlr->buf_rx_idx++] = readl(ctlr->iobase + HISI_I2C_RXDATA);
fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
}
if (ctlr->buf_rx_idx == cur_msg->len) {
ctlr->buf_rx_idx = 0;
ctlr->msg_rx_idx++;
}
if (fifo_state & HISI_I2C_FIFO_STATE_RX_EMPTY)
break;
}
return 0;
}
static void hisi_i2c_xfer_msg(struct hisi_i2c_controller *ctlr)
{
int max_write = HISI_I2C_TX_FIFO_DEPTH;
bool need_restart = false, last_msg;
struct i2c_msg *cur_msg;
u32 cmd, fifo_state;
while (ctlr->msg_tx_idx < ctlr->msg_num) {
cur_msg = ctlr->msgs + ctlr->msg_tx_idx;
last_msg = (ctlr->msg_tx_idx == ctlr->msg_num - 1);
/* Signal the SR bit when we start transferring a new message */
if (ctlr->msg_tx_idx && !ctlr->buf_tx_idx)
need_restart = true;
fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
while (!(fifo_state & HISI_I2C_FIFO_STATE_TX_FULL) &&
ctlr->buf_tx_idx < cur_msg->len && max_write) {
cmd = 0;
if (need_restart) {
cmd |= HISI_I2C_CMD_TXDATA_SR_EN;
need_restart = false;
}
/* Signal the STOP bit at the last frame of the last message */
if (ctlr->buf_tx_idx == cur_msg->len - 1 && last_msg)
cmd |= HISI_I2C_CMD_TXDATA_P_EN;
if (cur_msg->flags & I2C_M_RD)
cmd |= HISI_I2C_CMD_TXDATA_RW;
else
cmd |= FIELD_PREP(HISI_I2C_CMD_TXDATA_DATA,
cur_msg->buf[ctlr->buf_tx_idx]);
writel(cmd, ctlr->iobase + HISI_I2C_CMD_TXDATA);
ctlr->buf_tx_idx++;
max_write--;
fifo_state = readl(ctlr->iobase + HISI_I2C_FIFO_STATE);
}
/* Update the transfer index after per message transfer is done. */
if (ctlr->buf_tx_idx == cur_msg->len) {
ctlr->buf_tx_idx = 0;
ctlr->msg_tx_idx++;
}
if ((fifo_state & HISI_I2C_FIFO_STATE_TX_FULL) ||
max_write == 0)
break;
}
}
static irqreturn_t hisi_i2c_irq(int irq, void *context)
{
struct hisi_i2c_controller *ctlr = context;
u32 int_stat;
int_stat = readl(ctlr->iobase + HISI_I2C_INT_MSTAT);
hisi_i2c_clear_int(ctlr, int_stat);
if (!(int_stat & HISI_I2C_INT_ALL))
return IRQ_NONE;
if (int_stat & HISI_I2C_INT_TX_EMPTY)
hisi_i2c_xfer_msg(ctlr);
if (int_stat & HISI_I2C_INT_ERR) {
ctlr->xfer_err = int_stat;
goto out;
}
/* Drain the rx fifo before finish the transfer */
if (int_stat & (HISI_I2C_INT_TRANS_CPLT | HISI_I2C_INT_RX_FULL))
hisi_i2c_read_rx_fifo(ctlr);
out:
if (int_stat & HISI_I2C_INT_TRANS_CPLT || ctlr->xfer_err) {
hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
hisi_i2c_clear_int(ctlr, HISI_I2C_INT_ALL);
complete(ctlr->completion);
}
return IRQ_HANDLED;
}
/*
* Helper function for calculating and configuring the HIGH and LOW
* periods of SCL clock. The caller will pass the ratio of the
* counts (divide / divisor) according to the target speed mode,
* and the target registers.
*/
static void hisi_i2c_set_scl(struct hisi_i2c_controller *ctlr,
u32 divide, u32 divisor,
u32 reg_hcnt, u32 reg_lcnt)
{
u32 total_cnt, t_scl_hcnt, t_scl_lcnt, scl_fall_cnt, scl_rise_cnt;
u32 scl_hcnt, scl_lcnt;
/* Total SCL clock cycles per speed period */
total_cnt = DIV_ROUND_UP_ULL(ctlr->clk_rate_khz * HZ_PER_KHZ, ctlr->t.bus_freq_hz);
/* Total HIGH level SCL clock cycles including edges */
t_scl_hcnt = DIV_ROUND_UP_ULL(total_cnt * divide, divisor);
/* Total LOW level SCL clock cycles including edges */
t_scl_lcnt = total_cnt - t_scl_hcnt;
/* Fall edge SCL clock cycles */
scl_fall_cnt = NSEC_TO_CYCLES(ctlr->t.scl_fall_ns, ctlr->clk_rate_khz);
/* Rise edge SCL clock cycles */
scl_rise_cnt = NSEC_TO_CYCLES(ctlr->t.scl_rise_ns, ctlr->clk_rate_khz);
/* Calculated HIGH and LOW periods of SCL clock */
scl_hcnt = t_scl_hcnt - ctlr->spk_len - 7 - scl_fall_cnt;
scl_lcnt = t_scl_lcnt - 1 - scl_rise_cnt;
writel(scl_hcnt, ctlr->iobase + reg_hcnt);
writel(scl_lcnt, ctlr->iobase + reg_lcnt);
}
static void hisi_i2c_configure_bus(struct hisi_i2c_controller *ctlr)
{
u32 reg, sda_hold_cnt, speed_mode;
i2c_parse_fw_timings(ctlr->dev, &ctlr->t, true);
ctlr->spk_len = NSEC_TO_CYCLES(ctlr->t.digital_filter_width_ns, ctlr->clk_rate_khz);
switch (ctlr->t.bus_freq_hz) {
case I2C_MAX_FAST_MODE_FREQ:
speed_mode = HISI_I2C_FAST_SPEED_MODE;
hisi_i2c_set_scl(ctlr, 26, 76, HISI_I2C_FS_SCL_HCNT, HISI_I2C_FS_SCL_LCNT);
break;
case I2C_MAX_HIGH_SPEED_MODE_FREQ:
speed_mode = HISI_I2C_HIGH_SPEED_MODE;
hisi_i2c_set_scl(ctlr, 6, 22, HISI_I2C_HS_SCL_HCNT, HISI_I2C_HS_SCL_LCNT);
break;
case I2C_MAX_STANDARD_MODE_FREQ:
default:
speed_mode = HISI_I2C_STD_SPEED_MODE;
/* For default condition force the bus speed to standard mode. */
ctlr->t.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ;
hisi_i2c_set_scl(ctlr, 40, 87, HISI_I2C_SS_SCL_HCNT, HISI_I2C_SS_SCL_LCNT);
break;
}
reg = readl(ctlr->iobase + HISI_I2C_FRAME_CTRL);
reg &= ~HISI_I2C_FRAME_CTRL_SPEED_MODE;
reg |= FIELD_PREP(HISI_I2C_FRAME_CTRL_SPEED_MODE, speed_mode);
writel(reg, ctlr->iobase + HISI_I2C_FRAME_CTRL);
sda_hold_cnt = NSEC_TO_CYCLES(ctlr->t.sda_hold_ns, ctlr->clk_rate_khz);
reg = FIELD_PREP(HISI_I2C_SDA_HOLD_TX, sda_hold_cnt);
writel(reg, ctlr->iobase + HISI_I2C_SDA_HOLD);
writel(ctlr->spk_len, ctlr->iobase + HISI_I2C_FS_SPK_LEN);
reg = FIELD_PREP(HISI_I2C_FIFO_RX_AF_THRESH, HISI_I2C_RX_F_AF_THRESH);
reg |= FIELD_PREP(HISI_I2C_FIFO_TX_AE_THRESH, HISI_I2C_TX_F_AE_THRESH);
writel(reg, ctlr->iobase + HISI_I2C_FIFO_CTRL);
}
static int hisi_i2c_probe(struct platform_device *pdev)
{
struct hisi_i2c_controller *ctlr;
struct device *dev = &pdev->dev;
struct i2c_adapter *adapter;
u64 clk_rate_hz;
u32 hw_version;
int ret;
ctlr = devm_kzalloc(dev, sizeof(*ctlr), GFP_KERNEL);
if (!ctlr)
return -ENOMEM;
ctlr->iobase = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(ctlr->iobase))
return PTR_ERR(ctlr->iobase);
ctlr->irq = platform_get_irq(pdev, 0);
if (ctlr->irq < 0)
return ctlr->irq;
ctlr->dev = dev;
hisi_i2c_disable_int(ctlr, HISI_I2C_INT_ALL);
ret = devm_request_irq(dev, ctlr->irq, hisi_i2c_irq, 0, "hisi-i2c", ctlr);
if (ret) {
dev_err(dev, "failed to request irq handler, ret = %d\n", ret);
return ret;
}
ret = device_property_read_u64(dev, "clk_rate", &clk_rate_hz);
if (ret) {
dev_err(dev, "failed to get clock frequency, ret = %d\n", ret);
return ret;
}
ctlr->clk_rate_khz = DIV_ROUND_UP_ULL(clk_rate_hz, HZ_PER_KHZ);
hisi_i2c_configure_bus(ctlr);
adapter = &ctlr->adapter;
snprintf(adapter->name, sizeof(adapter->name),
"HiSilicon I2C Controller %s", dev_name(dev));
adapter->owner = THIS_MODULE;
adapter->algo = &hisi_i2c_algo;
adapter->dev.parent = dev;
i2c_set_adapdata(adapter, ctlr);
ret = devm_i2c_add_adapter(dev, adapter);
if (ret)
return ret;
hw_version = readl(ctlr->iobase + HISI_I2C_VERSION);
dev_info(ctlr->dev, "speed mode is %s. hw version 0x%x\n",
i2c_freq_mode_string(ctlr->t.bus_freq_hz), hw_version);
return 0;
}
static const struct acpi_device_id hisi_i2c_acpi_ids[] = {
{ "HISI03D1", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, hisi_i2c_acpi_ids);
static struct platform_driver hisi_i2c_driver = {
.probe = hisi_i2c_probe,
.driver = {
.name = "hisi-i2c",
.acpi_match_table = hisi_i2c_acpi_ids,
},
};
module_platform_driver(hisi_i2c_driver);
MODULE_AUTHOR("Yicong Yang <yangyicong@hisilicon.com>");
MODULE_DESCRIPTION("HiSilicon I2C Controller Driver");
MODULE_LICENSE("GPL");