blob: 71cce5687580612c9cc8a79470b64754a125533d [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/allwinner,sun6i-a31-drc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Allwinner A31 Dynamic Range Controller Device Tree Bindings
maintainers:
- Chen-Yu Tsai <wens@csie.org>
- Maxime Ripard <mripard@kernel.org>
description: |
The DRC (Dynamic Range Controller) allows to dynamically adjust
pixel brightness/contrast based on histogram measurements for LCD
content adaptive backlight control.
properties:
compatible:
enum:
- allwinner,sun6i-a31-drc
- allwinner,sun6i-a31s-drc
- allwinner,sun8i-a23-drc
- allwinner,sun8i-a33-drc
- allwinner,sun9i-a80-drc
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: The DRC interface clock
- description: The DRC module clock
- description: The DRC DRAM clock
clock-names:
items:
- const: ahb
- const: mod
- const: ram
resets:
maxItems: 1
ports:
$ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description: |
Input endpoints of the controller.
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: |
Output endpoints of the controller.
required:
- port@0
- port@1
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/sun6i-a31-ccu.h>
#include <dt-bindings/reset/sun6i-a31-ccu.h>
drc0: drc@1e70000 {
compatible = "allwinner,sun6i-a31-drc";
reg = <0x01e70000 0x10000>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_AHB1_DRC0>, <&ccu CLK_IEP_DRC0>,
<&ccu CLK_DRAM_DRC0>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_AHB1_DRC0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
drc0_in: port@0 {
reg = <0>;
drc0_in_be0: endpoint {
remote-endpoint = <&be0_out_drc0>;
};
};
drc0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
drc0_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_drc0>;
};
drc0_out_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_drc0>;
};
};
};
};
...