Documentation/devicetree/bindings/pci/pci-thunder-pem.txt

* ThunderX PEM PCIe host controller

Firmware-initialized PCI host controller found on some Cavium
ThunderX processors.

The properties and their meanings are identical to those described in
host-generic-pci.txt except as listed below.

Properties of the host controller node that differ from
host-generic-pci.txt:

- compatible     : Must be "cavium,pci-host-thunder-pem"

- reg            : Two entries: First the configuration space for down
                   stream devices base address and size, as accessed
                   from the parent bus. Second, the register bank of
                   the PEM device PCIe bridge.

Example:

    pci@87e0,c2000000 {
	compatible = "cavium,pci-host-thunder-pem";
	device_type = "pci";
	msi-parent = <&its>;
	msi-map = <0 &its 0x10000 0x10000>;
	bus-range = <0x8f 0xc7>;
	#size-cells = <2>;
	#address-cells = <3>;

	reg = <0x8880 0x8f000000 0x0 0x39000000>,  /* Configuration space */
	      <0x87e0 0xc2000000 0x0 0x00010000>; /* PEM space */
	ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */
		 <0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */
		 <0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */
		 <0x03000000 0x87e0 0xc2f00000 0x87e0 0xc2000000 0x00 0x00100000>; /* mem64 PEM BAR4 */

	#interrupt-cells = <1>;
	interrupt-map-mask = <0 0 0 7>;
	interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
			<0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
			<0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
			<0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
    };