blob: de6a0cc32fea8712988687ea10001ca6d8f106c5 [file] [log] [blame]
/*
* ip22-berr.c: Bus error handling.
*
* Copyright (C) 2002, 2003 Ladislav Michl (ladis@linux-mips.org)
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <asm/addrspace.h>
#include <asm/system.h>
#include <asm/traps.h>
#include <asm/branch.h>
#include <asm/irq_regs.h>
#include <asm/sgi/mc.h>
#include <asm/sgi/hpc3.h>
#include <asm/sgi/ioc.h>
#include <asm/sgi/ip22.h>
static unsigned int cpu_err_stat; /* Status reg for CPU */
static unsigned int gio_err_stat; /* Status reg for GIO */
static unsigned int cpu_err_addr; /* Error address reg for CPU */
static unsigned int gio_err_addr; /* Error address reg for GIO */
static unsigned int extio_stat;
static unsigned int hpc3_berr_stat; /* Bus error interrupt status */
static void save_and_clear_buserr(void)
{
/* save status registers */
cpu_err_addr = sgimc->cerr;
cpu_err_stat = sgimc->cstat;
gio_err_addr = sgimc->gerr;
gio_err_stat = sgimc->gstat;
extio_stat = ip22_is_fullhouse() ? sgioc->extio : (sgint->errstat << 4);
hpc3_berr_stat = hpc3c0->bestat;
sgimc->cstat = sgimc->gstat = 0;
}
#define GIO_ERRMASK 0xff00
#define CPU_ERRMASK 0x3f00
static void print_buserr(void)
{
if (extio_stat & EXTIO_MC_BUSERR)
printk(KERN_ERR "MC Bus Error\n");
if (extio_stat & EXTIO_HPC3_BUSERR)
printk(KERN_ERR "HPC3 Bus Error 0x%x:<id=0x%x,%s,lane=0x%x>\n",
hpc3_berr_stat,
(hpc3_berr_stat & HPC3_BESTAT_PIDMASK) >>
HPC3_BESTAT_PIDSHIFT,
(hpc3_berr_stat & HPC3_BESTAT_CTYPE) ? "PIO" : "DMA",
hpc3_berr_stat & HPC3_BESTAT_BLMASK);
if (extio_stat & EXTIO_EISA_BUSERR)
printk(KERN_ERR "EISA Bus Error\n");
if (cpu_err_stat & CPU_ERRMASK)
printk(KERN_ERR "CPU error 0x%x<%s%s%s%s%s%s> @ 0x%08x\n",
cpu_err_stat,
cpu_err_stat & SGIMC_CSTAT_RD ? "RD " : "",
cpu_err_stat & SGIMC_CSTAT_PAR ? "PAR " : "",
cpu_err_stat & SGIMC_CSTAT_ADDR ? "ADDR " : "",
cpu_err_stat & SGIMC_CSTAT_SYSAD_PAR ? "SYSAD " : "",
cpu_err_stat & SGIMC_CSTAT_SYSCMD_PAR ? "SYSCMD " : "",
cpu_err_stat & SGIMC_CSTAT_BAD_DATA ? "BAD_DATA " : "",
cpu_err_addr);
if (gio_err_stat & GIO_ERRMASK)
printk(KERN_ERR "GIO error 0x%x:<%s%s%s%s%s%s%s%s> @ 0x%08x\n",
gio_err_stat,
gio_err_stat & SGIMC_GSTAT_RD ? "RD " : "",
gio_err_stat & SGIMC_GSTAT_WR ? "WR " : "",
gio_err_stat & SGIMC_GSTAT_TIME ? "TIME " : "",
gio_err_stat & SGIMC_GSTAT_PROM ? "PROM " : "",
gio_err_stat & SGIMC_GSTAT_ADDR ? "ADDR " : "",
gio_err_stat & SGIMC_GSTAT_BC ? "BC " : "",
gio_err_stat & SGIMC_GSTAT_PIO_RD ? "PIO_RD " : "",
gio_err_stat & SGIMC_GSTAT_PIO_WR ? "PIO_WR " : "",
gio_err_addr);
}
/*
* MC sends an interrupt whenever bus or parity errors occur. In addition,
* if the error happened during a CPU read, it also asserts the bus error
* pin on the R4K. Code in bus error handler save the MC bus error registers
* and then clear the interrupt when this happens.
*/
void ip22_be_interrupt(int irq)
{
const int field = 2 * sizeof(unsigned long);
const struct pt_regs *regs = get_irq_regs();
save_and_clear_buserr();
print_buserr();
printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
(regs->cp0_cause & 4) ? "Data" : "Instruction",
field, regs->cp0_epc, field, regs->regs[31]);
/* Assume it would be too dangerous to continue ... */
die_if_kernel("Oops", regs);
force_sig(SIGBUS, current);
}
static int ip22_be_handler(struct pt_regs *regs, int is_fixup)
{
save_and_clear_buserr();
if (is_fixup)
return MIPS_BE_FIXUP;
print_buserr();
return MIPS_BE_FATAL;
}
void __init ip22_be_init(void)
{
board_be_handler = ip22_be_handler;
}