include/asm-powerpc/exception.h - linux/kernel/git/torvalds/linux - Git at Google

 #ifndef _ASM_POWERPC_EXCEPTION_H
 #define _ASM_POWERPC_EXCEPTION_H
 /*
  * Extracted from head_64.S
  *
  *  PowerPC version
  *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
  *
  *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
  *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
  *  Adapted for Power Macintosh by Paul Mackerras.
  *  Low-level exception handlers and MMU support
  *  rewritten by Paul Mackerras.
  *    Copyright (C) 1996 Paul Mackerras.
  *
  *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
  *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
  *
  *  This file contains the low-level support and setup for the
  *  PowerPC-64 platform, including trap and interrupt dispatch.
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
  *  as published by the Free Software Foundation; either version
  *  2 of the License, or (at your option) any later version.
  */
 /*
  * The following macros define the code that appears as
  * the prologue to each of the exception handlers.  They
  * are split into two parts to allow a single kernel binary
  * to be used for pSeries and iSeries.
  *
  * We make as much of the exception code common between native
  * exception handlers (including pSeries LPAR) and iSeries LPAR
  * implementations as possible.
  */

 #define EX_R9		0
 #define EX_R10		8
 #define EX_R11		16
 #define EX_R12		24
 #define EX_R13		32
 #define EX_SRR0		40
 #define EX_DAR		48
 #define EX_DSISR	56
 #define EX_CCR		60
 #define EX_R3		64
 #define EX_LR		72

 /*
  * We're short on space and time in the exception prolog, so we can't
  * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
  * low halfword of the address, but for Kdump we need the whole low
  * word.
  */
 #ifdef CONFIG_CRASH_DUMP
 #define LOAD_HANDLER(reg, label)					\
 	oris	reg,reg,(label)@h;	/* virt addr of handler ... */	\
 	ori	reg,reg,(label)@l;	/* .. and the rest */
 #else
 #define LOAD_HANDLER(reg, label)					\
 	ori	reg,reg,(label)@l;	/* virt addr of handler ... */
 #endif

 #define EXCEPTION_PROLOG_1(area)				\
 	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
 	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
 	std	r10,area+EX_R10(r13);					\
 	std	r11,area+EX_R11(r13);					\
 	std	r12,area+EX_R12(r13);					\
 	mfspr	r9,SPRN_SPRG1;						\
 	std	r9,area+EX_R13(r13);					\
 	mfcr	r9

 /*
  * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
  * The firmware calls the registered system_reset_fwnmi and
  * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
  * a 32bit application at the time of the event.
  * This firmware bug is present on POWER4 and JS20.
  */
 #define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label)		\
 	EXCEPTION_PROLOG_1(area);					\
 	clrrdi	r12,r13,32;		/* get high part of &label */	\
 	mfmsr	r10;							\
 	/* force 64bit mode */						\
 	li	r11,5;			/* MSR_SF_LG|MSR_ISF_LG */	\
 	rldimi	r10,r11,61,0;		/* insert into top 3 bits */	\
 	/* done 64bit mode */						\
 	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
 	LOAD_HANDLER(r12,label)						\
 	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
 	mtspr	SPRN_SRR0,r12;						\
 	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
 	mtspr	SPRN_SRR1,r10;						\
 	rfid;								\
 	b	.	/* prevent speculative execution */

 #define EXCEPTION_PROLOG_PSERIES(area, label)				\
 	EXCEPTION_PROLOG_1(area);					\
 	clrrdi	r12,r13,32;		/* get high part of &label */	\
 	mfmsr	r10;							\
 	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
 	LOAD_HANDLER(r12,label)						\
 	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
 	mtspr	SPRN_SRR0,r12;						\
 	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
 	mtspr	SPRN_SRR1,r10;						\
 	rfid;								\
 	b	.	/* prevent speculative execution */

 /*
  * The common exception prolog is used for all except a few exceptions
  * such as a segment miss on a kernel address.  We have to be prepared
  * to take another exception from the point where we first touch the
  * kernel stack onwards.
  *
  * On entry r13 points to the paca, r9-r13 are saved in the paca,
  * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
  * SRR1, and relocation is on.
  */
 #define EXCEPTION_PROLOG_COMMON(n, area)				   \
 	andi.	r10,r12,MSR_PR;		/* See if coming from user	*/ \
 	mr	r10,r1;			/* Save r1			*/ \
 	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack	*/ \
 	beq-	1f;							   \
 	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
 1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
 	bge-	cr1,2f;			/* abort if it is		*/ \
 	b	3f;							   \
 2:	li	r1,(n);			/* will be reloaded later	*/ \
 	sth	r1,PACA_TRAP_SAVE(r13);					   \
 	b	bad_stack;						   \
 3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
 	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
 	std	r12,_MSR(r1);		/* save SRR1 in stackframe	*/ \
 	std	r10,0(r1);		/* make stack chain pointer	*/ \
 	std	r0,GPR0(r1);		/* save r0 in stackframe	*/ \
 	std	r10,GPR1(r1);		/* save r1 in stackframe	*/ \
 	ACCOUNT_CPU_USER_ENTRY(r9, r10);				   \
 	std	r2,GPR2(r1);		/* save r2 in stackframe	*/ \
 	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe	*/ \
 	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe	*/ \
 	ld	r9,area+EX_R9(r13);	/* move r9, r10 to stackframe	*/ \
 	ld	r10,area+EX_R10(r13);					   \
 	std	r9,GPR9(r1);						   \
 	std	r10,GPR10(r1);						   \
 	ld	r9,area+EX_R11(r13);	/* move r11 - r13 to stackframe	*/ \
 	ld	r10,area+EX_R12(r13);					   \
 	ld	r11,area+EX_R13(r13);					   \
 	std	r9,GPR11(r1);						   \
 	std	r10,GPR12(r1);						   \
 	std	r11,GPR13(r1);						   \
 	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
 	mflr	r9;			/* save LR in stackframe	*/ \
 	std	r9,_LINK(r1);						   \
 	mfctr	r10;			/* save CTR in stackframe	*/ \
 	std	r10,_CTR(r1);						   \
 	lbz	r10,PACASOFTIRQEN(r13);				   \
 	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
 	std	r10,SOFTE(r1);						   \
 	std	r11,_XER(r1);						   \
 	li	r9,(n)+1;						   \
 	std	r9,_TRAP(r1);		/* set trap number		*/ \
 	li	r10,0;							   \
 	ld	r11,exception_marker@toc(r2);				   \
 	std	r10,RESULT(r1);		/* clear regs->result		*/ \
 	std	r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame	*/

 /*
  * Exception vectors.
  */
 #define STD_EXCEPTION_PSERIES(n, label)			\
 	. = n;						\
 	.globl label##_pSeries;				\
 label##_pSeries:					\
 	HMT_MEDIUM;					\
 	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)

 #define HSTD_EXCEPTION_PSERIES(n, label)		\
 	. = n;						\
 	.globl label##_pSeries;				\
 label##_pSeries:					\
 	HMT_MEDIUM;					\
 	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
 	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
 	mtspr	SPRN_SRR0,r20;				\
 	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
 	mtspr	SPRN_SRR1,r20;				\
 	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
 	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)


 #define MASKABLE_EXCEPTION_PSERIES(n, label)				\
 	. = n;								\
 	.globl label##_pSeries;						\
 label##_pSeries:							\
 	HMT_MEDIUM;							\
 	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
 	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
 	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
 	std	r10,PACA_EXGEN+EX_R10(r13);				\
 	lbz	r10,PACASOFTIRQEN(r13);					\
 	mfcr	r9;							\
 	cmpwi	r10,0;							\
 	beq	masked_interrupt;					\
 	mfspr	r10,SPRN_SPRG1;						\
 	std	r10,PACA_EXGEN+EX_R13(r13);				\
 	std	r11,PACA_EXGEN+EX_R11(r13);				\
 	std	r12,PACA_EXGEN+EX_R12(r13);				\
 	clrrdi	r12,r13,32;		/* get high part of &label */	\
 	mfmsr	r10;							\
 	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
 	LOAD_HANDLER(r12,label##_common)				\
 	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
 	mtspr	SPRN_SRR0,r12;						\
 	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
 	mtspr	SPRN_SRR1,r10;						\
 	rfid;								\
 	b	.	/* prevent speculative execution */

 #ifdef CONFIG_PPC_ISERIES
 #define DISABLE_INTS				\
 	li	r11,0;				\
 	stb	r11,PACASOFTIRQEN(r13);		\
 BEGIN_FW_FTR_SECTION;				\
 	stb	r11,PACAHARDIRQEN(r13);		\
 END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
 BEGIN_FW_FTR_SECTION;				\
 	mfmsr	r10;				\
 	ori	r10,r10,MSR_EE;			\
 	mtmsrd	r10,1;				\
 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)

 #else
 #define DISABLE_INTS				\
 	li	r11,0;				\
 	stb	r11,PACASOFTIRQEN(r13);		\
 	stb	r11,PACAHARDIRQEN(r13)

 #endif /* CONFIG_PPC_ISERIES */

 #define ENABLE_INTS				\
 	ld	r12,_MSR(r1);			\
 	mfmsr	r11;				\
 	rlwimi	r11,r12,0,MSR_EE;		\
 	mtmsrd	r11,1

 #define STD_EXCEPTION_COMMON(trap, label, hdlr)		\
 	.align	7;					\
 	.globl label##_common;				\
 label##_common:						\
 	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
 	DISABLE_INTS;					\
 	bl	.save_nvgprs;				\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
 	bl	hdlr;					\
 	b	.ret_from_except

 /*
  * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
  * in the idle task and therefore need the special idle handling.
  */
 #define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)	\
 	.align	7;					\
 	.globl label##_common;				\
 label##_common:						\
 	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
 	FINISH_NAP;					\
 	DISABLE_INTS;					\
 	bl	.save_nvgprs;				\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
 	bl	hdlr;					\
 	b	.ret_from_except

 #define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)	\
 	.align	7;					\
 	.globl label##_common;				\
 label##_common:						\
 	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
 	FINISH_NAP;					\
 	DISABLE_INTS;					\
 BEGIN_FTR_SECTION					\
 	bl	.ppc64_runlatch_on;			\
 END_FTR_SECTION_IFSET(CPU_FTR_CTRL)			\
 	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
 	bl	hdlr;					\
 	b	.ret_from_except_lite

 /*
  * When the idle code in power4_idle puts the CPU into NAP mode,
  * it has to do so in a loop, and relies on the external interrupt
  * and decrementer interrupt entry code to get it out of the loop.
  * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
  * to signal that it is in the loop and needs help to get out.
  */
 #ifdef CONFIG_PPC_970_NAP
 #define FINISH_NAP				\
 BEGIN_FTR_SECTION				\
 	clrrdi	r11,r1,THREAD_SHIFT;		\
 	ld	r9,TI_LOCAL_FLAGS(r11);		\
 	andi.	r10,r9,_TLF_NAPPING;		\
 	bnel	power4_fixup_nap;		\
 END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
 #else
 #define FINISH_NAP
 #endif

 #endif	/* _ASM_POWERPC_EXCEPTION_H */
	#ifndef _ASM_POWERPC_EXCEPTION_H
	#define _ASM_POWERPC_EXCEPTION_H
	/*
	* Extracted from head_64.S
	*
	* PowerPC version
	* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
	*
	* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
	* Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
	* Adapted for Power Macintosh by Paul Mackerras.
	* Low-level exception handlers and MMU support
	* rewritten by Paul Mackerras.
	* Copyright (C) 1996 Paul Mackerras.
	*
	* Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
	* Mike Corrigan {engebret\|bergner\|mikejc}@us.ibm.com
	*
	* This file contains the low-level support and setup for the
	* PowerPC-64 platform, including trap and interrupt dispatch.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*/
	/*
	* The following macros define the code that appears as
	* the prologue to each of the exception handlers. They
	* are split into two parts to allow a single kernel binary
	* to be used for pSeries and iSeries.
	*
	* We make as much of the exception code common between native
	* exception handlers (including pSeries LPAR) and iSeries LPAR
	* implementations as possible.
	*/

	#define EX_R9 0
	#define EX_R10 8
	#define EX_R11 16
	#define EX_R12 24
	#define EX_R13 32
	#define EX_SRR0 40
	#define EX_DAR 48
	#define EX_DSISR 56
	#define EX_CCR 60
	#define EX_R3 64
	#define EX_LR 72

	/*
	* We're short on space and time in the exception prolog, so we can't
	* use the normal SET_REG_IMMEDIATE macro. Normally we just need the
	* low halfword of the address, but for Kdump we need the whole low
	* word.
	*/
	#ifdef CONFIG_CRASH_DUMP
	#define LOAD_HANDLER(reg, label) \
	oris reg,reg,(label)@h; /* virt addr of handler ... */ \
	ori reg,reg,(label)@l; /* .. and the rest */
	#else
	#define LOAD_HANDLER(reg, label) \
	ori reg,reg,(label)@l; /* virt addr of handler ... */
	#endif

	#define EXCEPTION_PROLOG_1(area) \
	mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
	std r9,area+EX_R9(r13); /* save r9 - r12 */ \
	std r10,area+EX_R10(r13); \
	std r11,area+EX_R11(r13); \
	std r12,area+EX_R12(r13); \
	mfspr r9,SPRN_SPRG1; \
	std r9,area+EX_R13(r13); \
	mfcr r9

	/*
	* Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
	* The firmware calls the registered system_reset_fwnmi and
	* machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
	* a 32bit application at the time of the event.
	* This firmware bug is present on POWER4 and JS20.
	*/
	#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \
	EXCEPTION_PROLOG_1(area); \
	clrrdi r12,r13,32; /* get high part of &label */ \
	mfmsr r10; \
	/* force 64bit mode */ \
	li r11,5; /* MSR_SF_LG\|MSR_ISF_LG */ \
	rldimi r10,r11,61,0; /* insert into top 3 bits */ \
	/* done 64bit mode */ \
	mfspr r11,SPRN_SRR0; /* save SRR0 */ \
	LOAD_HANDLER(r12,label) \
	ori r10,r10,MSR_IR\|MSR_DR\|MSR_RI; \
	mtspr SPRN_SRR0,r12; \
	mfspr r12,SPRN_SRR1; /* and SRR1 */ \
	mtspr SPRN_SRR1,r10; \
	rfid; \
	b . /* prevent speculative execution */

	#define EXCEPTION_PROLOG_PSERIES(area, label) \
	EXCEPTION_PROLOG_1(area); \
	clrrdi r12,r13,32; /* get high part of &label */ \
	mfmsr r10; \
	mfspr r11,SPRN_SRR0; /* save SRR0 */ \
	LOAD_HANDLER(r12,label) \
	ori r10,r10,MSR_IR\|MSR_DR\|MSR_RI; \
	mtspr SPRN_SRR0,r12; \
	mfspr r12,SPRN_SRR1; /* and SRR1 */ \
	mtspr SPRN_SRR1,r10; \
	rfid; \
	b . /* prevent speculative execution */

	/*
	* The common exception prolog is used for all except a few exceptions
	* such as a segment miss on a kernel address. We have to be prepared
	* to take another exception from the point where we first touch the
	* kernel stack onwards.
	*
	* On entry r13 points to the paca, r9-r13 are saved in the paca,
	* r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
	* SRR1, and relocation is on.
	*/
	#define EXCEPTION_PROLOG_COMMON(n, area) \
	andi. r10,r12,MSR_PR; /* See if coming from user */ \
	mr r10,r1; /* Save r1 */ \
	subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \
	beq- 1f; \
	ld r1,PACAKSAVE(r13); /* kernel stack to use */ \
	1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \
	bge- cr1,2f; /* abort if it is */ \
	b 3f; \
	2: li r1,(n); /* will be reloaded later */ \
	sth r1,PACA_TRAP_SAVE(r13); \
	b bad_stack; \
	3: std r9,_CCR(r1); /* save CR in stackframe */ \
	std r11,_NIP(r1); /* save SRR0 in stackframe */ \
	std r12,_MSR(r1); /* save SRR1 in stackframe */ \
	std r10,0(r1); /* make stack chain pointer */ \
	std r0,GPR0(r1); /* save r0 in stackframe */ \
	std r10,GPR1(r1); /* save r1 in stackframe */ \
	ACCOUNT_CPU_USER_ENTRY(r9, r10); \
	std r2,GPR2(r1); /* save r2 in stackframe */ \
	SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
	SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
	ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \
	ld r10,area+EX_R10(r13); \
	std r9,GPR9(r1); \
	std r10,GPR10(r1); \
	ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \
	ld r10,area+EX_R12(r13); \
	ld r11,area+EX_R13(r13); \
	std r9,GPR11(r1); \
	std r10,GPR12(r1); \
	std r11,GPR13(r1); \
	ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
	mflr r9; /* save LR in stackframe */ \
	std r9,_LINK(r1); \
	mfctr r10; /* save CTR in stackframe */ \
	std r10,_CTR(r1); \
	lbz r10,PACASOFTIRQEN(r13); \
	mfspr r11,SPRN_XER; /* save XER in stackframe */ \
	std r10,SOFTE(r1); \
	std r11,_XER(r1); \
	li r9,(n)+1; \
	std r9,_TRAP(r1); /* set trap number */ \
	li r10,0; \
	ld r11,exception_marker@toc(r2); \
	std r10,RESULT(r1); /* clear regs->result */ \
	std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */

	/*
	* Exception vectors.
	*/
	#define STD_EXCEPTION_PSERIES(n, label) \
	. = n; \
	.globl label##_pSeries; \
	label##_pSeries: \
	HMT_MEDIUM; \
	mtspr SPRN_SPRG1,r13; /* save r13 */ \
	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)

	#define HSTD_EXCEPTION_PSERIES(n, label) \
	. = n; \
	.globl label##_pSeries; \
	label##_pSeries: \
	HMT_MEDIUM; \
	mtspr SPRN_SPRG1,r20; /* save r20 */ \
	mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \
	mtspr SPRN_SRR0,r20; \
	mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \
	mtspr SPRN_SRR1,r20; \
	mfspr r20,SPRN_SPRG1; /* restore r20 */ \
	mtspr SPRN_SPRG1,r13; /* save r13 */ \
	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)


	#define MASKABLE_EXCEPTION_PSERIES(n, label) \
	. = n; \
	.globl label##_pSeries; \
	label##_pSeries: \
	HMT_MEDIUM; \
	mtspr SPRN_SPRG1,r13; /* save r13 */ \
	mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
	std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \
	std r10,PACA_EXGEN+EX_R10(r13); \
	lbz r10,PACASOFTIRQEN(r13); \
	mfcr r9; \
	cmpwi r10,0; \
	beq masked_interrupt; \
	mfspr r10,SPRN_SPRG1; \
	std r10,PACA_EXGEN+EX_R13(r13); \
	std r11,PACA_EXGEN+EX_R11(r13); \
	std r12,PACA_EXGEN+EX_R12(r13); \
	clrrdi r12,r13,32; /* get high part of &label */ \
	mfmsr r10; \
	mfspr r11,SPRN_SRR0; /* save SRR0 */ \
	LOAD_HANDLER(r12,label##_common) \
	ori r10,r10,MSR_IR\|MSR_DR\|MSR_RI; \
	mtspr SPRN_SRR0,r12; \
	mfspr r12,SPRN_SRR1; /* and SRR1 */ \
	mtspr SPRN_SRR1,r10; \
	rfid; \
	b . /* prevent speculative execution */

	#ifdef CONFIG_PPC_ISERIES
	#define DISABLE_INTS \
	li r11,0; \
	stb r11,PACASOFTIRQEN(r13); \
	BEGIN_FW_FTR_SECTION; \
	stb r11,PACAHARDIRQEN(r13); \
	END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \
	BEGIN_FW_FTR_SECTION; \
	mfmsr r10; \
	ori r10,r10,MSR_EE; \
	mtmsrd r10,1; \
	END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)

	#else
	#define DISABLE_INTS \
	li r11,0; \
	stb r11,PACASOFTIRQEN(r13); \
	stb r11,PACAHARDIRQEN(r13)

	#endif /* CONFIG_PPC_ISERIES */

	#define ENABLE_INTS \
	ld r12,_MSR(r1); \
	mfmsr r11; \
	rlwimi r11,r12,0,MSR_EE; \
	mtmsrd r11,1

	#define STD_EXCEPTION_COMMON(trap, label, hdlr) \
	.align 7; \
	.globl label##_common; \
	label##_common: \
	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
	DISABLE_INTS; \
	bl .save_nvgprs; \
	addi r3,r1,STACK_FRAME_OVERHEAD; \
	bl hdlr; \
	b .ret_from_except

	/*
	* Like STD_EXCEPTION_COMMON, but for exceptions that can occur
	* in the idle task and therefore need the special idle handling.
	*/
	#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \
	.align 7; \
	.globl label##_common; \
	label##_common: \
	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
	FINISH_NAP; \
	DISABLE_INTS; \
	bl .save_nvgprs; \
	addi r3,r1,STACK_FRAME_OVERHEAD; \
	bl hdlr; \
	b .ret_from_except

	#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \
	.align 7; \
	.globl label##_common; \
	label##_common: \
	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
	FINISH_NAP; \
	DISABLE_INTS; \
	BEGIN_FTR_SECTION \
	bl .ppc64_runlatch_on; \
	END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \
	addi r3,r1,STACK_FRAME_OVERHEAD; \
	bl hdlr; \
	b .ret_from_except_lite

	/*
	* When the idle code in power4_idle puts the CPU into NAP mode,
	* it has to do so in a loop, and relies on the external interrupt
	* and decrementer interrupt entry code to get it out of the loop.
	* It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
	* to signal that it is in the loop and needs help to get out.
	*/
	#ifdef CONFIG_PPC_970_NAP
	#define FINISH_NAP \
	BEGIN_FTR_SECTION \
	clrrdi r11,r1,THREAD_SHIFT; \
	ld r9,TI_LOCAL_FLAGS(r11); \
	andi. r10,r9,_TLF_NAPPING; \
	bnel power4_fixup_nap; \
	END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
	#else
	#define FINISH_NAP
	#endif

	#endif /* _ASM_POWERPC_EXCEPTION_H */