| Linux version 5.1.0-rc7-00061-g04652f1cb4aa0 (brendanhiggins@mactruck.svl.corp.google.com) (gcc version 7.3.0 (Debian 7.3.0-18)) #163 Wed May 8 16:18:20 PDT 2019 |
| Built 1 zonelists, mobility grouping on. Total pages: 69906 |
| Kernel command line: mem=256M root=98:0 |
| Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) |
| Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) |
| Memory: 254468K/283500K available (1734K kernel code, 489K rwdata, 396K rodata, 85K init, 216K bss, 29032K reserved, 0K cma-reserved) |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 |
| NR_IRQS: 15 |
| clocksource: timer: mask: 0xffffffffffffffff max_cycles: 0x1cd42e205, max_idle_ns: 881590404426 ns |
| ------------[ cut here ]------------ |
| WARNING: CPU: 0 PID: 0 at kernel/time/clockevents.c:458 clockevents_register_device+0x143/0x160 |
| posix-timer cpumask == cpu_all_mask, using cpu_possible_mask instead |
| CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc7-00061-g04652f1cb4aa0 #163 |
| Stack: |
| 6005cc00 60233e18 60233e60 60233e18 |
| 60233e60 00000009 00000000 6002a1b4 |
| 1ca00000000 60071c23 60233e78 100000000000062 |
| Call Trace: |
| [<600214c5>] ? os_is_signal_stack+0x15/0x30 |
| [<6005c5ec>] ? printk+0x0/0x9b |
| [<6001597e>] ? show_stack+0xbe/0x1c0 |
| [<6005cc00>] ? __printk_safe_exit+0x0/0x40 |
| [<6002a1b4>] ? __warn+0x144/0x170 |
| [<60071c23>] ? clockevents_register_device+0x143/0x160 |
| [<60021440>] ? get_signals+0x0/0x10 |
| [<6005c5ec>] ? printk+0x0/0x9b |
| [<6002a27b>] ? warn_slowpath_fmt+0x9b/0xb0 |
| [<6005c5ec>] ? printk+0x0/0x9b |
| [<6002a1e0>] ? warn_slowpath_fmt+0x0/0xb0 |
| [<6005c5ec>] ? printk+0x0/0x9b |
| [<60021440>] ? get_signals+0x0/0x10 |
| [<600213f0>] ? block_signals+0x0/0x20 |
| [<60071c23>] ? clockevents_register_device+0x143/0x160 |
| [<60021440>] ? get_signals+0x0/0x10 |
| [<600213f0>] ? block_signals+0x0/0x20 |
| [<6005c5ec>] ? printk+0x0/0x9b |
| [<60001bc8>] ? start_kernel+0x477/0x56a |
| [<600036f1>] ? start_kernel_proc+0x46/0x4d |
| [<60014442>] ? new_thread_handler+0x82/0xc0 |
| |
| random: get_random_bytes called from print_oops_end_marker+0x4c/0x60 with crng_init=0 |
| ---[ end trace c83434852b3702d3 ]--- |
| Calibrating delay loop... 6958.28 BogoMIPS (lpj=34791424) |
| pid_max: default: 32768 minimum: 301 |
| Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) |
| Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) |
| *** VALIDATE proc *** |
| Checking that host ptys support output SIGIO...Yes |
| Checking that host ptys support SIGIO on close...No, enabling workaround |
| clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns |
| futex hash table entries: 256 (order: 0, 6144 bytes) |
| clocksource: Switched to clocksource timer |
| printk: console [stderr0] disabled |
| mconsole (version 2) initialized on /usr/local/google/home/brendanhiggins/.uml/VZ2qMm/mconsole |
| Checking host MADV_REMOVE support...OK |
| workingset: timestamp_bits=62 max_order=16 bucket_order=0 |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) |
| io scheduler mq-deadline registered |
| io scheduler kyber registered |
| Initialized stdio console driver |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 1 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 2 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 3 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 4 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 5 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 6 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 7 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 8 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 9 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 10 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 11 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 12 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 13 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 14 : Configuration failed |
| Using a channel type which is configured out of UML |
| setup_one_line failed for device 15 : Configuration failed |
| Console initialized on /dev/tty0 |
| printk: console [tty0] enabled |
| printk: console [mc-1] enabled |
| TAP version 14 |
| # Subtest: example |
| 1..2 |
| init_suite |
| # example_simple_test: initializing |
| # example_simple_test: example_simple_test passed |
| ok 1 - example_simple_test |
| # example_mock_test: initializing |
| # example_mock_test: example_mock_test passed |
| ok 2 - example_mock_test |
| kunit example: all tests passed |
| ok 1 - example |
| List of all partitions: |
