drivers/scsi/tmscsim.h - linux/kernel/git/torvalds/linux - Git at Google

 /***********************************************************************
 ;*	File Name : TMSCSIM.H					       *
 ;*		    TEKRAM DC-390(T) PCI SCSI Bus Master Host Adapter  *
 ;*		    Device Driver				       *
 ;***********************************************************************/
 /* $Id: tmscsim.h,v 2.15.2.3 2000/11/17 20:52:27 garloff Exp $ */

 #ifndef _TMSCSIM_H
 #define _TMSCSIM_H

 #include <linux/types.h>

 #define SCSI_IRQ_NONE 255

 #define MAX_ADAPTER_NUM 	4
 #define MAX_SG_LIST_BUF 	16	/* Not used */
 #define MAX_SCSI_ID		8
 #define MAX_SRB_CNT		50	/* Max number of started commands */

 #define SEL_TIMEOUT		153	/* 250 ms selection timeout (@ 40 MHz) */

 #define pci_dma_lo32(a)			(a & 0xffffffff)

 typedef u8		UCHAR;	/*  8 bits */
 typedef u16		USHORT;	/* 16 bits */
 typedef u32		UINT;	/* 32 bits */
 typedef unsigned long	ULONG;	/* 32/64 bits */


 /*
 ;-----------------------------------------------------------------------
 ; SCSI Request Block
 ;-----------------------------------------------------------------------
 */
 struct dc390_srb
 {
 //u8		CmdBlock[12];

 struct dc390_srb	*pNextSRB;
 struct dc390_dcb	*pSRBDCB;
 struct scsi_cmnd	*pcmd;
 struct scatterlist	*pSegmentList;

 struct scatterlist Segmentx;	/* make a one entry of S/G list table */

 unsigned long	SGBusAddr;	/*;a segment starting address as seen by AM53C974A*/
 unsigned long	SGToBeXferLen;	/*; to be xfer length */
 unsigned long	TotalXferredLen;
 unsigned long	SavedTotXLen;
 unsigned long	Saved_Ptr;
 u32		SRBState;

 u8		SRBStatus;
 u8		SRBFlag;	/*; b0-AutoReqSense,b6-Read,b7-write */
 				/*; b4-settimeout,b5-Residual valid */
 u8		AdaptStatus;
 u8		TargetStatus;

 u8		ScsiPhase;
 s8		TagNumber;
 u8		SGIndex;
 u8		SGcount;

 u8		MsgCnt;
 u8		EndMessage;
 u8		SavedSGCount;

 u8		MsgInBuf[6];
 u8		MsgOutBuf[6];

 //u8		IORBFlag;	/*;81h-Reset, 2-retry */
 };


 /*
 ;-----------------------------------------------------------------------
 ; Device Control Block
 ;-----------------------------------------------------------------------
 */
 struct dc390_dcb
 {
 struct dc390_dcb	*pNextDCB;
 struct dc390_acb	*pDCBACB;

 /* Queued SRBs */
 struct dc390_srb	*pGoingSRB;
 struct dc390_srb	*pGoingLast;
 struct dc390_srb	*pActiveSRB;
 u8		GoingSRBCnt;

 u32		TagMask;

 u8		TargetID;	/*; SCSI Target ID  (SCSI Only) */
 u8		TargetLUN;	/*; SCSI Log.  Unit (SCSI Only) */
 u8		DevMode;
 u8		DCBFlag;

 u8		CtrlR1;
 u8		CtrlR3;
 u8		CtrlR4;

 u8		SyncMode;	/*; 0:async mode */
 u8		NegoPeriod;	/*;for nego. */
 u8		SyncPeriod;	/*;for reg. */
 u8		SyncOffset;	/*;for reg. and nego.(low nibble) */
 };


 /*
 ;-----------------------------------------------------------------------
 ; Adapter Control Block
 ;-----------------------------------------------------------------------
 */
 struct dc390_acb
 {
 struct Scsi_Host *pScsiHost;
 u16		IOPortBase;
 u8		IRQLevel;
 u8		status;

 u8		SRBCount;
 u8		AdapterIndex;	/*; nth Adapter this driver */
 u8		DCBCnt;

 u8		TagMaxNum;
 u8		ACBFlag;
 u8		Gmode2;
 u8		scan_devices;

 struct dc390_dcb	*pLinkDCB;
 struct dc390_dcb	*pLastDCB;
 struct dc390_dcb	*pDCBRunRobin;

 struct dc390_dcb	*pActiveDCB;
 struct dc390_srb	*pFreeSRB;
 struct dc390_srb	*pTmpSRB;

 u8		msgin123[4];
 u8		Connected;
 u8		pad;

 #if defined(USE_SPINLOCKS) && USE_SPINLOCKS > 1 && (defined(CONFIG_SMP) || DEBUG_SPINLOCKS > 0)
 spinlock_t	lock;
 #endif
 u8		sel_timeout;
 u8		glitch_cfg;

 u8		MsgLen;
 u8		Ignore_IRQ;	/* Not used */

 struct pci_dev	*pdev;

 unsigned long	Cmds;
 u32		SelLost;
 u32		SelConn;
 u32		CmdInQ;
 u32		CmdOutOfSRB;

 struct dc390_srb	TmpSRB;
 struct dc390_srb	SRB_array[MAX_SRB_CNT]; 	/* 50 SRBs */
 };


 /*;-----------------------------------------------------------------------*/


 #define BIT31	0x80000000
 #define BIT30	0x40000000
 #define BIT29	0x20000000
 #define BIT28	0x10000000
 #define BIT27	0x08000000
 #define BIT26	0x04000000
 #define BIT25	0x02000000
 #define BIT24	0x01000000
 #define BIT23	0x00800000
 #define BIT22	0x00400000
 #define BIT21	0x00200000
 #define BIT20	0x00100000
 #define BIT19	0x00080000
 #define BIT18	0x00040000
 #define BIT17	0x00020000
 #define BIT16	0x00010000
 #define BIT15	0x00008000
 #define BIT14	0x00004000
 #define BIT13	0x00002000
 #define BIT12	0x00001000
 #define BIT11	0x00000800
 #define BIT10	0x00000400
 #define BIT9	0x00000200
 #define BIT8	0x00000100
 #define BIT7	0x00000080
 #define BIT6	0x00000040
 #define BIT5	0x00000020
 #define BIT4	0x00000010
 #define BIT3	0x00000008
 #define BIT2	0x00000004
 #define BIT1	0x00000002
 #define BIT0	0x00000001

 /*;---UnitCtrlFlag */
 #define UNIT_ALLOCATED	BIT0
 #define UNIT_INFO_CHANGED BIT1
 #define FORMATING_MEDIA BIT2
 #define UNIT_RETRY	BIT3

 /*;---UnitFlags */
 #define DASD_SUPPORT	BIT0
 #define SCSI_SUPPORT	BIT1
 #define ASPI_SUPPORT	BIT2

 /*;----SRBState machine definition */
 #define SRB_FREE	0
 #define SRB_WAIT	BIT0
 #define SRB_READY	BIT1
 #define SRB_MSGOUT	BIT2	/*;arbitration+msg_out 1st byte*/
 #define SRB_MSGIN	BIT3
 #define SRB_MSGIN_MULTI BIT4
 #define SRB_COMMAND	BIT5
 #define SRB_START_	BIT6	/*;arbitration+msg_out+command_out*/
 #define SRB_DISCONNECT	BIT7
 #define SRB_DATA_XFER	BIT8
 #define SRB_XFERPAD	BIT9
 #define SRB_STATUS	BIT10
 #define SRB_COMPLETED	BIT11
 #define SRB_ABORT_SENT	BIT12
 #define DO_SYNC_NEGO	BIT13
 #define SRB_UNEXPECT_RESEL BIT14

 /*;---SRBstatus */
 #define SRB_OK		BIT0
 #define ABORTION	BIT1
 #define OVER_RUN	BIT2
 #define UNDER_RUN	BIT3
 #define PARITY_ERROR	BIT4
 #define SRB_ERROR	BIT5

 /*;---ACBFlag */
 #define RESET_DEV	BIT0
 #define RESET_DETECT	BIT1
 #define RESET_DONE	BIT2

 /*;---DCBFlag */
 #define ABORT_DEV_	BIT0

 /*;---SRBFlag */
 #define DATAOUT 	BIT7
 #define DATAIN		BIT6
 #define RESIDUAL_VALID	BIT5
 #define ENABLE_TIMER	BIT4
 #define RESET_DEV0	BIT2
 #define ABORT_DEV	BIT1
 #define AUTO_REQSENSE	BIT0

 /*;---Adapter status */
 #define H_STATUS_GOOD	 0
 #define H_SEL_TIMEOUT	 0x11
 #define H_OVER_UNDER_RUN 0x12
 #define H_UNEXP_BUS_FREE 0x13
 #define H_TARGET_PHASE_F 0x14
 #define H_INVALID_CCB_OP 0x16
 #define H_LINK_CCB_BAD	 0x17
 #define H_BAD_TARGET_DIR 0x18
 #define H_DUPLICATE_CCB  0x19
 #define H_BAD_CCB_OR_SG  0x1A
 #define H_ABORT 	 0x0FF

 /*; SCSI Status byte codes*/
 /* The values defined in include/scsi/scsi.h, to be shifted << 1 */

 #define SCSI_STAT_UNEXP_BUS_F	0xFD	/*;  Unexpect Bus Free */
 #define SCSI_STAT_BUS_RST_DETECT 0xFE	/*;  Scsi Bus Reset detected */
 #define SCSI_STAT_SEL_TIMEOUT	0xFF	/*;  Selection Time out */

 /* cmd->result */
 #define RES_TARGET		0x000000FF	/* Target State */
 #define RES_TARGET_LNX		STATUS_MASK	/* Only official ... */
 #define RES_ENDMSG		0x0000FF00	/* End Message */
 #define RES_DID			0x00FF0000	/* DID_ codes */
 #define RES_DRV			0xFF000000	/* DRIVER_ codes */

 #define MK_RES(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt))
 #define MK_RES_LNX(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt)<<1)

 #define SET_RES_TARGET(who, tgt) do { who &= ~RES_TARGET; who |= (int)(tgt); } while (0)
 #define SET_RES_TARGET_LNX(who, tgt) do { who &= ~RES_TARGET_LNX; who |= (int)(tgt) << 1; } while (0)
 #define SET_RES_MSG(who, msg) do { who &= ~RES_ENDMSG; who |= (int)(msg) << 8; } while (0)
 #define SET_RES_DID(who, did) do { who &= ~RES_DID; who |= (int)(did) << 16; } while (0)
 #define SET_RES_DRV(who, drv) do { who &= ~RES_DRV; who |= (int)(drv) << 24; } while (0)

 /*;---Sync_Mode */
 #define SYNC_DISABLE	0
 #define SYNC_ENABLE	BIT0
 #define SYNC_NEGO_DONE	BIT1
 #define WIDE_ENABLE	BIT2	/* Not used ;-) */
 #define WIDE_NEGO_DONE	BIT3	/* Not used ;-) */
 #define EN_TAG_QUEUEING	BIT4
 #define EN_ATN_STOP	BIT5

 #define SYNC_NEGO_OFFSET 15

 /*;---SCSI bus phase*/
 #define SCSI_DATA_OUT	0
 #define SCSI_DATA_IN	1
 #define SCSI_COMMAND	2
 #define SCSI_STATUS_	3
 #define SCSI_NOP0	4
 #define SCSI_NOP1	5
 #define SCSI_MSG_OUT	6
 #define SCSI_MSG_IN	7

 /*;----SCSI MSG BYTE*/ /* see scsi/scsi.h */ /* One is missing ! */
 #define ABORT_TAG	0x0d

 /*
  *	SISC query queue
  */
 typedef struct {
 	dma_addr_t		saved_dma_handle;
 } dc390_cmd_scp_t;

 /*
 ;==========================================================
 ; EEPROM byte offset
 ;==========================================================
 */
 typedef  struct  _EEprom
 {
 u8	EE_MODE1;
 u8	EE_SPEED;
 u8	xx1;
 u8	xx2;
 } EEprom, *PEEprom;

 #define REAL_EE_ADAPT_SCSI_ID 64
 #define REAL_EE_MODE2	65
 #define REAL_EE_DELAY	66
 #define REAL_EE_TAG_CMD_NUM	67

 #define EE_ADAPT_SCSI_ID 32
 #define EE_MODE2	33
 #define EE_DELAY	34
 #define EE_TAG_CMD_NUM	35

 #define EE_LEN		40

 /*; EE_MODE1 bits definition*/
 #define PARITY_CHK_	BIT0
 #define SYNC_NEGO_	BIT1
 #define EN_DISCONNECT_	BIT2
 #define SEND_START_	BIT3
 #define TAG_QUEUEING_	BIT4

 /*; EE_MODE2 bits definition*/
 #define MORE2_DRV	BIT0
 #define GREATER_1G	BIT1
 #define RST_SCSI_BUS	BIT2
 #define ACTIVE_NEGATION BIT3
 #define NO_SEEK 	BIT4
 #define LUN_CHECK	BIT5

 #define ENABLE_CE	1
 #define DISABLE_CE	0
 #define EEPROM_READ	0x80

 /*
 ;==========================================================
 ;	AMD 53C974 Registers bit Definition
 ;==========================================================
 */
 /*
 ;====================
 ; SCSI Register
 ;====================
 */

 /*; Command Reg.(+0CH) (rw) */
 #define DMA_COMMAND		BIT7
 #define NOP_CMD 		0
 #define CLEAR_FIFO_CMD		1
 #define RST_DEVICE_CMD		2
 #define RST_SCSI_BUS_CMD	3

 #define INFO_XFER_CMD		0x10
 #define INITIATOR_CMD_CMPLTE	0x11
 #define MSG_ACCEPTED_CMD	0x12
 #define XFER_PAD_BYTE		0x18
 #define SET_ATN_CMD		0x1A
 #define RESET_ATN_CMD		0x1B

 #define SEL_WO_ATN		0x41	/* currently not used */
 #define SEL_W_ATN		0x42
 #define SEL_W_ATN_STOP		0x43
 #define SEL_W_ATN3		0x46
 #define EN_SEL_RESEL		0x44
 #define DIS_SEL_RESEL		0x45	/* currently not used */
 #define RESEL			0x40	/* " */
 #define RESEL_ATN3		0x47	/* " */

 #define DATA_XFER_CMD		INFO_XFER_CMD


 /*; SCSI Status Reg.(+10H) (r) */
 #define INTERRUPT		BIT7
 #define ILLEGAL_OP_ERR		BIT6
 #define PARITY_ERR		BIT5
 #define COUNT_2_ZERO		BIT4
 #define GROUP_CODE_VALID	BIT3
 #define SCSI_PHASE_MASK 	(BIT2+BIT1+BIT0)
 /* BIT2: MSG phase; BIT1: C/D physe; BIT0: I/O phase */

 /*; Interrupt Status Reg.(+14H) (r) */
 #define SCSI_RESET		BIT7
 #define INVALID_CMD		BIT6
 #define DISCONNECTED		BIT5
 #define SERVICE_REQUEST 	BIT4
 #define SUCCESSFUL_OP		BIT3
 #define RESELECTED		BIT2
 #define SEL_ATTENTION		BIT1
 #define SELECTED		BIT0

 /*; Internal State Reg.(+18H) (r) */
 #define SYNC_OFFSET_FLAG	BIT3
 #define INTRN_STATE_MASK	(BIT2+BIT1+BIT0)
 /* 0x04: Sel. successful (w/o stop), 0x01: Sel. successful (w/ stop) */

 /*; Clock Factor Reg.(+24H) (w) */
 #define CLK_FREQ_40MHZ		0
 #define CLK_FREQ_35MHZ		(BIT2+BIT1+BIT0)
 #define CLK_FREQ_30MHZ		(BIT2+BIT1)
 #define CLK_FREQ_25MHZ		(BIT2+BIT0)
 #define CLK_FREQ_20MHZ		BIT2
 #define CLK_FREQ_15MHZ		(BIT1+BIT0)
 #define CLK_FREQ_10MHZ		BIT1

 /*; Control Reg. 1(+20H) (rw) */
 #define EXTENDED_TIMING 	BIT7
 #define DIS_INT_ON_SCSI_RST	BIT6
 #define PARITY_ERR_REPO 	BIT4
 #define SCSI_ID_ON_BUS		(BIT2+BIT1+BIT0) /* host adapter ID */

 /*; Control Reg. 2(+2CH) (rw) */
 #define EN_FEATURE		BIT6
 #define EN_SCSI2_CMD		BIT3

 /*; Control Reg. 3(+30H) (rw) */
 #define ID_MSG_CHECK		BIT7
 #define EN_QTAG_MSG		BIT6
 #define EN_GRP2_CMD		BIT5
 #define FAST_SCSI		BIT4	/* ;10MB/SEC */
 #define FAST_CLK		BIT3	/* ;25 - 40 MHZ */

 /*; Control Reg. 4(+34H) (rw) */
 #define EATER_12NS		0
 #define EATER_25NS		BIT7
 #define EATER_35NS		BIT6
 #define EATER_0NS		(BIT7+BIT6)
 #define REDUCED_POWER		BIT5
 #define CTRL4_RESERVED		BIT4	/* must be 1 acc. to AM53C974.c */
 #define NEGATE_REQACKDATA	BIT2
 #define NEGATE_REQACK		BIT3

 #define GLITCH_TO_NS(x) (((~x>>6 & 2) >> 1) | ((x>>6 & 1) << 1 ^ (x>>6 & 2)))
 #define NS_TO_GLITCH(y) (((~y<<7) | ~((y<<6) ^ ((y<<5 & 1<<6) | ~0x40))) & 0xc0)

 /*
 ;====================
 ; DMA Register
 ;====================
 */
 /*; DMA Command Reg.(+40H) (rw) */
 #define READ_DIRECTION		BIT7
 #define WRITE_DIRECTION 	0
 #define EN_DMA_INT		BIT6
 #define EN_PAGE_INT		BIT5	/* page transfer interrupt enable */
 #define MAP_TO_MDL		BIT4
 #define DIAGNOSTIC		BIT2
 #define DMA_IDLE_CMD		0
 #define DMA_BLAST_CMD		BIT0
 #define DMA_ABORT_CMD		BIT1
 #define DMA_START_CMD		(BIT1+BIT0)

 /*; DMA Status Reg.(+54H) (r) */
 #define PCI_MS_ABORT		BIT6
 #define BLAST_COMPLETE		BIT5
 #define SCSI_INTERRUPT		BIT4
 #define DMA_XFER_DONE		BIT3
 #define DMA_XFER_ABORT		BIT2
 #define DMA_XFER_ERROR		BIT1
 #define POWER_DOWN		BIT0

 /*; DMA SCSI Bus and Ctrl.(+70H) */
 #define EN_INT_ON_PCI_ABORT	BIT25
 #define WRT_ERASE_DMA_STAT	BIT24
 #define PW_DOWN_CTRL		BIT21
 #define SCSI_BUSY		BIT20
 #define SCLK			BIT19
 #define SCAM			BIT18
 #define SCSI_LINES		0x0003ffff

 /*
 ;==========================================================
 ; SCSI Chip register address offset
 ;==========================================================
 ;Registers are rw unless declared otherwise
 */
 #define CtcReg_Low	0x00	/* r	curr. transfer count */
 #define CtcReg_Mid	0x04	/* r */
 #define CtcReg_High	0x38	/* r */
 #define ScsiFifo	0x08
 #define ScsiCmd 	0x0C
 #define Scsi_Status	0x10	/* r */
 #define INT_Status	0x14	/* r */
 #define Sync_Period	0x18	/* w */
 #define Sync_Offset	0x1C	/* w */
 #define Clk_Factor	0x24	/* w */
 #define CtrlReg1	0x20
 #define CtrlReg2	0x2C
 #define CtrlReg3	0x30
 #define CtrlReg4	0x34
 #define DMA_Cmd 	0x40
 #define DMA_XferCnt	0x44	/* rw	starting transfer count (32 bit) */
 #define DMA_XferAddr	0x48	/* rw	starting physical address (32 bit) */
 #define DMA_Wk_ByteCntr 0x4C	/* r	working byte counter */
 #define DMA_Wk_AddrCntr 0x50	/* r	working address counter */
 #define DMA_Status	0x54	/* r */
 #define DMA_MDL_Addr	0x58	/* rw	starting MDL address */
 #define DMA_Wk_MDL_Cntr 0x5C	/* r	working MDL counter */
 #define DMA_ScsiBusCtrl 0x70	/* rw	SCSI Bus, PCI/DMA Ctrl */

 #define StcReg_Low	CtcReg_Low	/* w	start transfer count */
 #define StcReg_Mid	CtcReg_Mid	/* w */
 #define StcReg_High	CtcReg_High	/* w */
 #define Scsi_Dest_ID	Scsi_Status	/* w */
 #define Scsi_TimeOut	INT_Status	/* w */
 #define Intern_State	Sync_Period	/* r */
 #define Current_Fifo	Sync_Offset	/* r	Curr. FIFO / int. state */


 #define DC390_read8(address)			\
 	(inb (pACB->IOPortBase + (address)))

 #define DC390_read8_(address, base)		\
 	(inb ((u16)(base) + (address)))

 #define DC390_read16(address)			\
 	(inw (pACB->IOPortBase + (address)))

 #define DC390_read32(address)			\
 	(inl (pACB->IOPortBase + (address)))

 #define DC390_write8(address,value)		\
 	outb ((value), pACB->IOPortBase + (address))

 #define DC390_write8_(address,value,base)	\
 	outb ((value), (u16)(base) + (address))

 #define DC390_write16(address,value)		\
 	outw ((value), pACB->IOPortBase + (address))

 #define DC390_write32(address,value)		\
 	outl ((value), pACB->IOPortBase + (address))


 #endif /* _TMSCSIM_H */
	/***********************************************************************
	;* File Name : TMSCSIM.H *
	;* TEKRAM DC-390(T) PCI SCSI Bus Master Host Adapter *
	;* Device Driver *
	;***********************************************************************/
	/* $Id: tmscsim.h,v 2.15.2.3 2000/11/17 20:52:27 garloff Exp $ */

	#ifndef _TMSCSIM_H
	#define _TMSCSIM_H

	#include <linux/types.h>

	#define SCSI_IRQ_NONE 255

	#define MAX_ADAPTER_NUM 4
	#define MAX_SG_LIST_BUF 16 /* Not used */
	#define MAX_SCSI_ID 8
	#define MAX_SRB_CNT 50 /* Max number of started commands */

	#define SEL_TIMEOUT 153 /* 250 ms selection timeout (@ 40 MHz) */

	#define pci_dma_lo32(a) (a & 0xffffffff)

	typedef u8 UCHAR; /* 8 bits */
	typedef u16 USHORT; /* 16 bits */
	typedef u32 UINT; /* 32 bits */
	typedef unsigned long ULONG; /* 32/64 bits */


	/*
	;-----------------------------------------------------------------------
	; SCSI Request Block
	;-----------------------------------------------------------------------
	*/
	struct dc390_srb
	{
	//u8 CmdBlock[12];

	struct dc390_srb *pNextSRB;
	struct dc390_dcb *pSRBDCB;
	struct scsi_cmnd *pcmd;
	struct scatterlist *pSegmentList;

	struct scatterlist Segmentx; /* make a one entry of S/G list table */

	unsigned long SGBusAddr; /;a segment starting address as seen by AM53C974A/
	unsigned long SGToBeXferLen; /; to be xfer length /
	unsigned long TotalXferredLen;
	unsigned long SavedTotXLen;
	unsigned long Saved_Ptr;
	u32 SRBState;

	u8 SRBStatus;
	u8 SRBFlag; /; b0-AutoReqSense,b6-Read,b7-write /
	/; b4-settimeout,b5-Residual valid /
	u8 AdaptStatus;
	u8 TargetStatus;

	u8 ScsiPhase;
	s8 TagNumber;
	u8 SGIndex;
	u8 SGcount;

	u8 MsgCnt;
	u8 EndMessage;
	u8 SavedSGCount;

	u8 MsgInBuf[6];
	u8 MsgOutBuf[6];

	//u8 IORBFlag; /;81h-Reset, 2-retry /
	};


	/*
	;-----------------------------------------------------------------------
	; Device Control Block
	;-----------------------------------------------------------------------
	*/
	struct dc390_dcb
	{
	struct dc390_dcb *pNextDCB;
	struct dc390_acb *pDCBACB;

	/* Queued SRBs */
	struct dc390_srb *pGoingSRB;
	struct dc390_srb *pGoingLast;
	struct dc390_srb *pActiveSRB;
	u8 GoingSRBCnt;

	u32 TagMask;

	u8 TargetID; /; SCSI Target ID (SCSI Only) /
	u8 TargetLUN; /; SCSI Log. Unit (SCSI Only) /
	u8 DevMode;
	u8 DCBFlag;

	u8 CtrlR1;
	u8 CtrlR3;
	u8 CtrlR4;

	u8 SyncMode; /; 0:async mode /
	u8 NegoPeriod; /;for nego. /
	u8 SyncPeriod; /;for reg. /
	u8 SyncOffset; /;for reg. and nego.(low nibble) /
	};


	/*
	;-----------------------------------------------------------------------
	; Adapter Control Block
	;-----------------------------------------------------------------------
	*/
	struct dc390_acb
	{
	struct Scsi_Host *pScsiHost;
	u16 IOPortBase;
	u8 IRQLevel;
	u8 status;

	u8 SRBCount;
	u8 AdapterIndex; /; nth Adapter this driver /
	u8 DCBCnt;

	u8 TagMaxNum;
	u8 ACBFlag;
	u8 Gmode2;
	u8 scan_devices;

	struct dc390_dcb *pLinkDCB;
	struct dc390_dcb *pLastDCB;
	struct dc390_dcb *pDCBRunRobin;

	struct dc390_dcb *pActiveDCB;
	struct dc390_srb *pFreeSRB;
	struct dc390_srb *pTmpSRB;

	u8 msgin123[4];
	u8 Connected;
	u8 pad;

	#if defined(USE_SPINLOCKS) && USE_SPINLOCKS > 1 && (defined(CONFIG_SMP) \|\| DEBUG_SPINLOCKS > 0)
	spinlock_t lock;
	#endif
	u8 sel_timeout;
	u8 glitch_cfg;

	u8 MsgLen;
	u8 Ignore_IRQ; /* Not used */

	struct pci_dev *pdev;

	unsigned long Cmds;
	u32 SelLost;
	u32 SelConn;
	u32 CmdInQ;
	u32 CmdOutOfSRB;

	struct dc390_srb TmpSRB;
	struct dc390_srb SRB_array[MAX_SRB_CNT]; /* 50 SRBs */
	};


	/;-----------------------------------------------------------------------/


	#define BIT31 0x80000000
	#define BIT30 0x40000000
	#define BIT29 0x20000000
	#define BIT28 0x10000000
	#define BIT27 0x08000000
	#define BIT26 0x04000000
	#define BIT25 0x02000000
	#define BIT24 0x01000000
	#define BIT23 0x00800000
	#define BIT22 0x00400000
	#define BIT21 0x00200000
	#define BIT20 0x00100000
	#define BIT19 0x00080000
	#define BIT18 0x00040000
	#define BIT17 0x00020000
	#define BIT16 0x00010000
	#define BIT15 0x00008000
	#define BIT14 0x00004000
	#define BIT13 0x00002000
	#define BIT12 0x00001000
	#define BIT11 0x00000800
	#define BIT10 0x00000400
	#define BIT9 0x00000200
	#define BIT8 0x00000100
	#define BIT7 0x00000080
	#define BIT6 0x00000040
	#define BIT5 0x00000020
	#define BIT4 0x00000010
	#define BIT3 0x00000008
	#define BIT2 0x00000004
	#define BIT1 0x00000002
	#define BIT0 0x00000001

	/;---UnitCtrlFlag /
	#define UNIT_ALLOCATED BIT0
	#define UNIT_INFO_CHANGED BIT1
	#define FORMATING_MEDIA BIT2
	#define UNIT_RETRY BIT3

	/;---UnitFlags /
	#define DASD_SUPPORT BIT0
	#define SCSI_SUPPORT BIT1
	#define ASPI_SUPPORT BIT2

	/;----SRBState machine definition /
	#define SRB_FREE 0
	#define SRB_WAIT BIT0
	#define SRB_READY BIT1
	#define SRB_MSGOUT BIT2 /;arbitration+msg_out 1st byte/
	#define SRB_MSGIN BIT3
	#define SRB_MSGIN_MULTI BIT4
	#define SRB_COMMAND BIT5
	#define SRB_START_ BIT6 /;arbitration+msg_out+command_out/
	#define SRB_DISCONNECT BIT7
	#define SRB_DATA_XFER BIT8
	#define SRB_XFERPAD BIT9
	#define SRB_STATUS BIT10
	#define SRB_COMPLETED BIT11
	#define SRB_ABORT_SENT BIT12
	#define DO_SYNC_NEGO BIT13
	#define SRB_UNEXPECT_RESEL BIT14

	/;---SRBstatus /
	#define SRB_OK BIT0
	#define ABORTION BIT1
	#define OVER_RUN BIT2
	#define UNDER_RUN BIT3
	#define PARITY_ERROR BIT4
	#define SRB_ERROR BIT5

	/;---ACBFlag /
	#define RESET_DEV BIT0
	#define RESET_DETECT BIT1
	#define RESET_DONE BIT2

	/;---DCBFlag /
	#define ABORT_DEV_ BIT0

	/;---SRBFlag /
	#define DATAOUT BIT7
	#define DATAIN BIT6
	#define RESIDUAL_VALID BIT5
	#define ENABLE_TIMER BIT4
	#define RESET_DEV0 BIT2
	#define ABORT_DEV BIT1
	#define AUTO_REQSENSE BIT0

	/;---Adapter status /
	#define H_STATUS_GOOD 0
	#define H_SEL_TIMEOUT 0x11
	#define H_OVER_UNDER_RUN 0x12
	#define H_UNEXP_BUS_FREE 0x13
	#define H_TARGET_PHASE_F 0x14
	#define H_INVALID_CCB_OP 0x16
	#define H_LINK_CCB_BAD 0x17
	#define H_BAD_TARGET_DIR 0x18
	#define H_DUPLICATE_CCB 0x19
	#define H_BAD_CCB_OR_SG 0x1A
	#define H_ABORT 0x0FF

	/; SCSI Status byte codes/
	/* The values defined in include/scsi/scsi.h, to be shifted << 1 */

	#define SCSI_STAT_UNEXP_BUS_F 0xFD /; Unexpect Bus Free /
	#define SCSI_STAT_BUS_RST_DETECT 0xFE /; Scsi Bus Reset detected /
	#define SCSI_STAT_SEL_TIMEOUT 0xFF /; Selection Time out /

	/* cmd->result */
	#define RES_TARGET 0x000000FF /* Target State */
	#define RES_TARGET_LNX STATUS_MASK /* Only official ... */
	#define RES_ENDMSG 0x0000FF00 /* End Message */
	#define RES_DID 0x00FF0000 /* DID_ codes */
	#define RES_DRV 0xFF000000 /* DRIVER_ codes */

	#define MK_RES(drv,did,msg,tgt) ((int)(drv)<<24 \| (int)(did)<<16 \| (int)(msg)<<8 \| (int)(tgt))
	#define MK_RES_LNX(drv,did,msg,tgt) ((int)(drv)<<24 \| (int)(did)<<16 \| (int)(msg)<<8 \| (int)(tgt)<<1)

	#define SET_RES_TARGET(who, tgt) do { who &= ~RES_TARGET; who \|= (int)(tgt); } while (0)
	#define SET_RES_TARGET_LNX(who, tgt) do { who &= ~RES_TARGET_LNX; who \|= (int)(tgt) << 1; } while (0)
	#define SET_RES_MSG(who, msg) do { who &= ~RES_ENDMSG; who \|= (int)(msg) << 8; } while (0)
	#define SET_RES_DID(who, did) do { who &= ~RES_DID; who \|= (int)(did) << 16; } while (0)
	#define SET_RES_DRV(who, drv) do { who &= ~RES_DRV; who \|= (int)(drv) << 24; } while (0)

	/;---Sync_Mode /
	#define SYNC_DISABLE 0
	#define SYNC_ENABLE BIT0
	#define SYNC_NEGO_DONE BIT1
	#define WIDE_ENABLE BIT2 /* Not used ;-) */
	#define WIDE_NEGO_DONE BIT3 /* Not used ;-) */
	#define EN_TAG_QUEUEING BIT4
	#define EN_ATN_STOP BIT5

	#define SYNC_NEGO_OFFSET 15

	/;---SCSI bus phase/
	#define SCSI_DATA_OUT 0
	#define SCSI_DATA_IN 1
	#define SCSI_COMMAND 2
	#define SCSI_STATUS_ 3
	#define SCSI_NOP0 4
	#define SCSI_NOP1 5
	#define SCSI_MSG_OUT 6
	#define SCSI_MSG_IN 7

	/;----SCSI MSG BYTE/ /* see scsi/scsi.h / / One is missing ! */
	#define ABORT_TAG 0x0d

	/*
	* SISC query queue
	*/
	typedef struct {
	dma_addr_t saved_dma_handle;
	} dc390_cmd_scp_t;

	/*
	;==========================================================
	; EEPROM byte offset
	;==========================================================
	*/
	typedef struct _EEprom
	{
	u8 EE_MODE1;
	u8 EE_SPEED;
	u8 xx1;
	u8 xx2;
	} EEprom, *PEEprom;

	#define REAL_EE_ADAPT_SCSI_ID 64
	#define REAL_EE_MODE2 65
	#define REAL_EE_DELAY 66
	#define REAL_EE_TAG_CMD_NUM 67

	#define EE_ADAPT_SCSI_ID 32
	#define EE_MODE2 33
	#define EE_DELAY 34
	#define EE_TAG_CMD_NUM 35

	#define EE_LEN 40

	/; EE_MODE1 bits definition/
	#define PARITY_CHK_ BIT0
	#define SYNC_NEGO_ BIT1
	#define EN_DISCONNECT_ BIT2
	#define SEND_START_ BIT3
	#define TAG_QUEUEING_ BIT4

	/; EE_MODE2 bits definition/
	#define MORE2_DRV BIT0
	#define GREATER_1G BIT1
	#define RST_SCSI_BUS BIT2
	#define ACTIVE_NEGATION BIT3
	#define NO_SEEK BIT4
	#define LUN_CHECK BIT5

	#define ENABLE_CE 1
	#define DISABLE_CE 0
	#define EEPROM_READ 0x80

	/*
	;==========================================================
	; AMD 53C974 Registers bit Definition
	;==========================================================
	*/
	/*
	;====================
	; SCSI Register
	;====================
	*/

	/; Command Reg.(+0CH) (rw) /
	#define DMA_COMMAND BIT7
	#define NOP_CMD 0
	#define CLEAR_FIFO_CMD 1
	#define RST_DEVICE_CMD 2
	#define RST_SCSI_BUS_CMD 3

	#define INFO_XFER_CMD 0x10
	#define INITIATOR_CMD_CMPLTE 0x11
	#define MSG_ACCEPTED_CMD 0x12
	#define XFER_PAD_BYTE 0x18
	#define SET_ATN_CMD 0x1A
	#define RESET_ATN_CMD 0x1B

	#define SEL_WO_ATN 0x41 /* currently not used */
	#define SEL_W_ATN 0x42
	#define SEL_W_ATN_STOP 0x43
	#define SEL_W_ATN3 0x46
	#define EN_SEL_RESEL 0x44
	#define DIS_SEL_RESEL 0x45 /* currently not used */
	#define RESEL 0x40 /* " */
	#define RESEL_ATN3 0x47 /* " */

	#define DATA_XFER_CMD INFO_XFER_CMD


	/; SCSI Status Reg.(+10H) (r) /
	#define INTERRUPT BIT7
	#define ILLEGAL_OP_ERR BIT6
	#define PARITY_ERR BIT5
	#define COUNT_2_ZERO BIT4
	#define GROUP_CODE_VALID BIT3
	#define SCSI_PHASE_MASK (BIT2+BIT1+BIT0)
	/* BIT2: MSG phase; BIT1: C/D physe; BIT0: I/O phase */

	/; Interrupt Status Reg.(+14H) (r) /
	#define SCSI_RESET BIT7
	#define INVALID_CMD BIT6
	#define DISCONNECTED BIT5
	#define SERVICE_REQUEST BIT4
	#define SUCCESSFUL_OP BIT3
	#define RESELECTED BIT2
	#define SEL_ATTENTION BIT1
	#define SELECTED BIT0

	/; Internal State Reg.(+18H) (r) /
	#define SYNC_OFFSET_FLAG BIT3
	#define INTRN_STATE_MASK (BIT2+BIT1+BIT0)
	/* 0x04: Sel. successful (w/o stop), 0x01: Sel. successful (w/ stop) */

	/; Clock Factor Reg.(+24H) (w) /
	#define CLK_FREQ_40MHZ 0
	#define CLK_FREQ_35MHZ (BIT2+BIT1+BIT0)
	#define CLK_FREQ_30MHZ (BIT2+BIT1)
	#define CLK_FREQ_25MHZ (BIT2+BIT0)
	#define CLK_FREQ_20MHZ BIT2
	#define CLK_FREQ_15MHZ (BIT1+BIT0)
	#define CLK_FREQ_10MHZ BIT1

	/; Control Reg. 1(+20H) (rw) /
	#define EXTENDED_TIMING BIT7
	#define DIS_INT_ON_SCSI_RST BIT6
	#define PARITY_ERR_REPO BIT4
	#define SCSI_ID_ON_BUS (BIT2+BIT1+BIT0) /* host adapter ID */

	/; Control Reg. 2(+2CH) (rw) /
	#define EN_FEATURE BIT6
	#define EN_SCSI2_CMD BIT3

	/; Control Reg. 3(+30H) (rw) /
	#define ID_MSG_CHECK BIT7
	#define EN_QTAG_MSG BIT6
	#define EN_GRP2_CMD BIT5
	#define FAST_SCSI BIT4 /* ;10MB/SEC */
	#define FAST_CLK BIT3 /* ;25 - 40 MHZ */

	/; Control Reg. 4(+34H) (rw) /
	#define EATER_12NS 0
	#define EATER_25NS BIT7
	#define EATER_35NS BIT6
	#define EATER_0NS (BIT7+BIT6)
	#define REDUCED_POWER BIT5
	#define CTRL4_RESERVED BIT4 /* must be 1 acc. to AM53C974.c */
	#define NEGATE_REQACKDATA BIT2
	#define NEGATE_REQACK BIT3

	#define GLITCH_TO_NS(x) (((~x>>6 & 2) >> 1) \| ((x>>6 & 1) << 1 ^ (x>>6 & 2)))
	#define NS_TO_GLITCH(y) (((~y<<7) \| ~((y<<6) ^ ((y<<5 & 1<<6) \| ~0x40))) & 0xc0)

	/*
	;====================
	; DMA Register
	;====================
	*/
	/; DMA Command Reg.(+40H) (rw) /
	#define READ_DIRECTION BIT7
	#define WRITE_DIRECTION 0
	#define EN_DMA_INT BIT6
	#define EN_PAGE_INT BIT5 /* page transfer interrupt enable */
	#define MAP_TO_MDL BIT4
	#define DIAGNOSTIC BIT2
	#define DMA_IDLE_CMD 0
	#define DMA_BLAST_CMD BIT0
	#define DMA_ABORT_CMD BIT1
	#define DMA_START_CMD (BIT1+BIT0)

	/; DMA Status Reg.(+54H) (r) /
	#define PCI_MS_ABORT BIT6
	#define BLAST_COMPLETE BIT5
	#define SCSI_INTERRUPT BIT4
	#define DMA_XFER_DONE BIT3
	#define DMA_XFER_ABORT BIT2
	#define DMA_XFER_ERROR BIT1
	#define POWER_DOWN BIT0

	/; DMA SCSI Bus and Ctrl.(+70H) /
	#define EN_INT_ON_PCI_ABORT BIT25
	#define WRT_ERASE_DMA_STAT BIT24
	#define PW_DOWN_CTRL BIT21
	#define SCSI_BUSY BIT20
	#define SCLK BIT19
	#define SCAM BIT18
	#define SCSI_LINES 0x0003ffff

	/*
	;==========================================================
	; SCSI Chip register address offset
	;==========================================================
	;Registers are rw unless declared otherwise
	*/
	#define CtcReg_Low 0x00 /* r curr. transfer count */
	#define CtcReg_Mid 0x04 /* r */
	#define CtcReg_High 0x38 /* r */
	#define ScsiFifo 0x08
	#define ScsiCmd 0x0C
	#define Scsi_Status 0x10 /* r */
	#define INT_Status 0x14 /* r */
	#define Sync_Period 0x18 /* w */
	#define Sync_Offset 0x1C /* w */
	#define Clk_Factor 0x24 /* w */
	#define CtrlReg1 0x20
	#define CtrlReg2 0x2C
	#define CtrlReg3 0x30
	#define CtrlReg4 0x34
	#define DMA_Cmd 0x40
	#define DMA_XferCnt 0x44 /* rw starting transfer count (32 bit) */
	#define DMA_XferAddr 0x48 /* rw starting physical address (32 bit) */
	#define DMA_Wk_ByteCntr 0x4C /* r working byte counter */
	#define DMA_Wk_AddrCntr 0x50 /* r working address counter */
	#define DMA_Status 0x54 /* r */
	#define DMA_MDL_Addr 0x58 /* rw starting MDL address */
	#define DMA_Wk_MDL_Cntr 0x5C /* r working MDL counter */
	#define DMA_ScsiBusCtrl 0x70 /* rw SCSI Bus, PCI/DMA Ctrl */

	#define StcReg_Low CtcReg_Low /* w start transfer count */
	#define StcReg_Mid CtcReg_Mid /* w */
	#define StcReg_High CtcReg_High /* w */
	#define Scsi_Dest_ID Scsi_Status /* w */
	#define Scsi_TimeOut INT_Status /* w */
	#define Intern_State Sync_Period /* r */
	#define Current_Fifo Sync_Offset /* r Curr. FIFO / int. state */


	#define DC390_read8(address) \
	(inb (pACB->IOPortBase + (address)))

	#define DC390_read8_(address, base) \
	(inb ((u16)(base) + (address)))

	#define DC390_read16(address) \
	(inw (pACB->IOPortBase + (address)))

	#define DC390_read32(address) \
	(inl (pACB->IOPortBase + (address)))

	#define DC390_write8(address,value) \
	outb ((value), pACB->IOPortBase + (address))

	#define DC390_write8_(address,value,base) \
	outb ((value), (u16)(base) + (address))

	#define DC390_write16(address,value) \
	outw ((value), pACB->IOPortBase + (address))

	#define DC390_write32(address,value) \
	outl ((value), pACB->IOPortBase + (address))


	#endif /* _TMSCSIM_H */