blob: d30cb791e63c86a32c12318c28dbf7e86397bd56 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Amlogic Thermal Sensor Driver
*
* Copyright (C) 2017 Huan Biao <huan.biao@amlogic.com>
* Copyright (C) 2019 Guillaume La Roque <glaroque@baylibre.com>
*
* Register value to celsius temperature formulas:
* Read_Val m * U
* U = ---------, Uptat = ---------
* 2^16 1 + n * U
*
* Temperature = A * ( Uptat + u_efuse / 2^16 )- B
*
* A B m n : calibration parameters
* u_efuse : fused calibration value, it's a signed 16 bits value
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/thermal.h>
#include "thermal_core.h"
#include "thermal_hwmon.h"
#define TSENSOR_CFG_REG1 0x4
#define TSENSOR_CFG_REG1_RSET_VBG BIT(12)
#define TSENSOR_CFG_REG1_RSET_ADC BIT(11)
#define TSENSOR_CFG_REG1_VCM_EN BIT(10)
#define TSENSOR_CFG_REG1_VBG_EN BIT(9)
#define TSENSOR_CFG_REG1_OUT_CTL BIT(6)
#define TSENSOR_CFG_REG1_FILTER_EN BIT(5)
#define TSENSOR_CFG_REG1_DEM_EN BIT(3)
#define TSENSOR_CFG_REG1_CH_SEL GENMASK(1, 0)
#define TSENSOR_CFG_REG1_ENABLE \
(TSENSOR_CFG_REG1_FILTER_EN | \
TSENSOR_CFG_REG1_VCM_EN | \
TSENSOR_CFG_REG1_VBG_EN | \
TSENSOR_CFG_REG1_DEM_EN | \
TSENSOR_CFG_REG1_CH_SEL)
#define TSENSOR_STAT0 0x40
#define TSENSOR_STAT9 0x64
#define TSENSOR_READ_TEMP_MASK GENMASK(15, 0)
#define TSENSOR_TEMP_MASK GENMASK(11, 0)
#define TSENSOR_TRIM_SIGN_MASK BIT(15)
#define TSENSOR_TRIM_TEMP_MASK GENMASK(14, 0)
#define TSENSOR_TRIM_VERSION_MASK GENMASK(31, 24)
#define TSENSOR_TRIM_VERSION(_version) \
FIELD_GET(TSENSOR_TRIM_VERSION_MASK, _version)
#define TSENSOR_TRIM_CALIB_VALID_MASK (GENMASK(3, 2) | BIT(7))
#define TSENSOR_CALIB_OFFSET 1
#define TSENSOR_CALIB_SHIFT 4
/**
* struct amlogic_thermal_soc_calib_data
* @A: calibration parameters
* @B: calibration parameters
* @m: calibration parameters
* @n: calibration parameters
*
* This structure is required for configuration of amlogic thermal driver.
*/
struct amlogic_thermal_soc_calib_data {
int A;
int B;
int m;
int n;
};
/**
* struct amlogic_thermal_data
* @u_efuse_off: register offset to read fused calibration value
* @calibration_parameters: calibration parameters structure pointer
* @regmap_config: regmap config for the device
* This structure is required for configuration of amlogic thermal driver.
*/
struct amlogic_thermal_data {
int u_efuse_off;
const struct amlogic_thermal_soc_calib_data *calibration_parameters;
const struct regmap_config *regmap_config;
};
struct amlogic_thermal {
struct platform_device *pdev;
const struct amlogic_thermal_data *data;
struct regmap *regmap;
struct regmap *sec_ao_map;
struct clk *clk;
struct thermal_zone_device *tzd;
u32 trim_info;
};
/*
* Calculate a temperature value from a temperature code.
* The unit of the temperature is degree milliCelsius.
*/
static int amlogic_thermal_code_to_millicelsius(struct amlogic_thermal *pdata,
int temp_code)
{
const struct amlogic_thermal_soc_calib_data *param =
pdata->data->calibration_parameters;
int temp;
s64 factor, Uptat, uefuse;
uefuse = pdata->trim_info & TSENSOR_TRIM_SIGN_MASK ?
~(pdata->trim_info & TSENSOR_TRIM_TEMP_MASK) + 1 :
(pdata->trim_info & TSENSOR_TRIM_TEMP_MASK);
factor = param->n * temp_code;
factor = div_s64(factor, 100);
Uptat = temp_code * param->m;
Uptat = div_s64(Uptat, 100);
Uptat = Uptat * BIT(16);
Uptat = div_s64(Uptat, BIT(16) + factor);
temp = (Uptat + uefuse) * param->A;
temp = div_s64(temp, BIT(16));
temp = (temp - param->B) * 100;
return temp;
}
static int amlogic_thermal_initialize(struct amlogic_thermal *pdata)
{
int ret = 0;
int ver;
regmap_read(pdata->sec_ao_map, pdata->data->u_efuse_off,
&pdata->trim_info);
ver = TSENSOR_TRIM_VERSION(pdata->trim_info);
if ((ver & TSENSOR_TRIM_CALIB_VALID_MASK) == 0) {
ret = -EINVAL;
dev_err(&pdata->pdev->dev,
"tsensor thermal calibration not supported: 0x%x!\n",
ver);
}
return ret;
}
static int amlogic_thermal_enable(struct amlogic_thermal *data)
{
int ret;
ret = clk_prepare_enable(data->clk);
if (ret)
return ret;
regmap_update_bits(data->regmap, TSENSOR_CFG_REG1,
TSENSOR_CFG_REG1_ENABLE, TSENSOR_CFG_REG1_ENABLE);
return 0;
}
static int amlogic_thermal_disable(struct amlogic_thermal *data)
{
regmap_update_bits(data->regmap, TSENSOR_CFG_REG1,
TSENSOR_CFG_REG1_ENABLE, 0);
clk_disable_unprepare(data->clk);
return 0;
}
static int amlogic_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
{
unsigned int tval;
struct amlogic_thermal *pdata = tz->devdata;
if (!pdata)
return -EINVAL;
regmap_read(pdata->regmap, TSENSOR_STAT0, &tval);
*temp =
amlogic_thermal_code_to_millicelsius(pdata,
tval & TSENSOR_READ_TEMP_MASK);
return 0;
}
static const struct thermal_zone_device_ops amlogic_thermal_ops = {
.get_temp = amlogic_thermal_get_temp,
};
static const struct regmap_config amlogic_thermal_regmap_config_g12a = {
.reg_bits = 8,
.val_bits = 32,
.reg_stride = 4,
.max_register = TSENSOR_STAT9,
};
static const struct amlogic_thermal_soc_calib_data amlogic_thermal_g12a = {
.A = 9411,
.B = 3159,
.m = 424,
.n = 324,
};
static const struct amlogic_thermal_data amlogic_thermal_g12a_cpu_param = {
.u_efuse_off = 0x128,
.calibration_parameters = &amlogic_thermal_g12a,
.regmap_config = &amlogic_thermal_regmap_config_g12a,
};
static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = {
.u_efuse_off = 0xf0,
.calibration_parameters = &amlogic_thermal_g12a,
.regmap_config = &amlogic_thermal_regmap_config_g12a,
};
static const struct of_device_id of_amlogic_thermal_match[] = {
{
.compatible = "amlogic,g12a-ddr-thermal",
.data = &amlogic_thermal_g12a_ddr_param,
},
{
.compatible = "amlogic,g12a-cpu-thermal",
.data = &amlogic_thermal_g12a_cpu_param,
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, of_amlogic_thermal_match);
static int amlogic_thermal_probe(struct platform_device *pdev)
{
struct amlogic_thermal *pdata;
struct device *dev = &pdev->dev;
void __iomem *base;
int ret;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
pdata->data = of_device_get_match_data(dev);
pdata->pdev = pdev;
platform_set_drvdata(pdev, pdata);
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
pdata->regmap = devm_regmap_init_mmio(dev, base,
pdata->data->regmap_config);
if (IS_ERR(pdata->regmap))
return PTR_ERR(pdata->regmap);
pdata->clk = devm_clk_get(dev, NULL);
if (IS_ERR(pdata->clk)) {
if (PTR_ERR(pdata->clk) != -EPROBE_DEFER)
dev_err(dev, "failed to get clock\n");
return PTR_ERR(pdata->clk);
}
pdata->sec_ao_map = syscon_regmap_lookup_by_phandle
(pdev->dev.of_node, "amlogic,ao-secure");
if (IS_ERR(pdata->sec_ao_map)) {
dev_err(dev, "syscon regmap lookup failed.\n");
return PTR_ERR(pdata->sec_ao_map);
}
pdata->tzd = devm_thermal_of_zone_register(&pdev->dev,
0,
pdata,
&amlogic_thermal_ops);
if (IS_ERR(pdata->tzd)) {
ret = PTR_ERR(pdata->tzd);
dev_err(dev, "Failed to register tsensor: %d\n", ret);
return ret;
}
if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
ret = amlogic_thermal_initialize(pdata);
if (ret)
return ret;
ret = amlogic_thermal_enable(pdata);
return ret;
}
static int amlogic_thermal_remove(struct platform_device *pdev)
{
struct amlogic_thermal *data = platform_get_drvdata(pdev);
return amlogic_thermal_disable(data);
}
static int __maybe_unused amlogic_thermal_suspend(struct device *dev)
{
struct amlogic_thermal *data = dev_get_drvdata(dev);
return amlogic_thermal_disable(data);
}
static int __maybe_unused amlogic_thermal_resume(struct device *dev)
{
struct amlogic_thermal *data = dev_get_drvdata(dev);
return amlogic_thermal_enable(data);
}
static SIMPLE_DEV_PM_OPS(amlogic_thermal_pm_ops,
amlogic_thermal_suspend, amlogic_thermal_resume);
static struct platform_driver amlogic_thermal_driver = {
.driver = {
.name = "amlogic_thermal",
.pm = &amlogic_thermal_pm_ops,
.of_match_table = of_amlogic_thermal_match,
},
.probe = amlogic_thermal_probe,
.remove = amlogic_thermal_remove,
};
module_platform_driver(amlogic_thermal_driver);
MODULE_AUTHOR("Guillaume La Roque <glaroque@baylibre.com>");
MODULE_DESCRIPTION("Amlogic thermal driver");
MODULE_LICENSE("GPL v2");