blob: 5a4f2091ac370379e5e08a65a66b50bf28826337 [file] [log] [blame]
What: /sys/bus/fcoe/
Date: August 2012
KernelVersion: TBD
Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
Description: The FCoE bus. Attributes in this directory are control interfaces.
Attributes:
ctlr_create:
'FCoE Controller' instance creation interface. Writing an
<ifname> to this file will allocate and populate sysfs with a
fcoe_ctlr_device (ctlr_X). The user can then configure any
per-port settings and finally write to the fcoe_ctlr_device's
'start' attribute to begin the kernel's discovery and login
process.
ctlr_destroy:
'FCoE Controller' instance removal interface. Writing a
fcoe_ctlr_device's sysfs name to this file will log the
fcoe_ctlr_device out of the fabric or otherwise connected
FCoE devices. It will also free all kernel memory allocated
for this fcoe_ctlr_device and any structures associated
with it, this includes the scsi_host.
What: /sys/bus/fcoe/devices/ctlr_X
Date: March 2012
KernelVersion: TBD
Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
Description: 'FCoE Controller' instances on the fcoe bus.
The FCoE Controller now has a three stage creation process.
1) Write interface name to ctlr_create 2) Configure the FCoE
Controller (ctlr_X) 3) Enable the FCoE Controller to begin
discovery and login. The FCoE Controller is destroyed by
writing its name, i.e. ctlr_X to the ctlr_delete file.
Attributes:
fcf_dev_loss_tmo:
Device loss timeout period (see below). Changing
this value will change the dev_loss_tmo for all
FCFs discovered by this controller.
mode:
Display or change the FCoE Controller's mode. Possible
modes are 'Fabric' and 'VN2VN'. If a FCoE Controller
is started in 'Fabric' mode then FIP FCF discovery is
initiated and ultimately a fabric login is attempted.
If a FCoE Controller is started in 'VN2VN' mode then
FIP VN2VN discovery and login is performed. A FCoE
Controller only supports one mode at a time.
enabled:
Whether an FCoE controller is enabled or disabled.
0 if disabled, 1 if enabled. Writing either 0 or 1
to this file will enable or disable the FCoE controller.
lesb/link_fail:
Link Error Status Block (LESB) link failure count.
lesb/vlink_fail:
Link Error Status Block (LESB) virtual link
failure count.
lesb/miss_fka:
Link Error Status Block (LESB) missed FCoE
Initialization Protocol (FIP) Keep-Alives (FKA).
lesb/symb_err:
Link Error Status Block (LESB) symbolic error count.
lesb/err_block:
Link Error Status Block (LESB) block error count.
lesb/fcs_error:
Link Error Status Block (LESB) Fibre Channel
Services error count.
Notes: ctlr_X (global increment starting at 0)
What: /sys/bus/fcoe/devices/fcf_X
Date: March 2012
KernelVersion: TBD
Contact: Robert Love <robert.w.love@intel.com>, devel@open-fcoe.org
Description: 'FCoE FCF' instances on the fcoe bus. A FCF is a Fibre Channel
Forwarder, which is a FCoE switch that can accept FCoE
(Ethernet) packets, unpack them, and forward the embedded
Fibre Channel frames into a FC fabric. It can also take
outbound FC frames and pack them in Ethernet packets to
be sent to their destination on the Ethernet segment.
Attributes:
fabric_name:
Identifies the fabric that the FCF services.
switch_name:
Identifies the FCF.
priority:
The switch's priority amongst other FCFs on the same
fabric.
selected:
1 indicates that the switch has been selected for use;
0 indicates that the switch will not be used.
fc_map:
The Fibre Channel MAP
vfid:
The Virtual Fabric ID
mac:
The FCF's MAC address
fka_period:
The FIP Keep-Alive period
fabric_state: The internal kernel state
- "Unknown" - Initialization value
- "Disconnected" - No link to the FCF/fabric
- "Connected" - Host is connected to the FCF
- "Deleted" - FCF is being removed from the system
dev_loss_tmo: The device loss timeout period for this FCF.
Notes: A device loss infrastructure similar to the FC Transport's
is present in fcoe_sysfs. It is nice to have so that a
link flapping adapter doesn't continually advance the count
used to identify the discovered FCF. FCFs will exist in a
"Disconnected" state until either the timer expires and the
FCF becomes "Deleted" or the FCF is rediscovered and becomes
"Connected."
Users: The first user of this interface will be the fcoeadm application,
which is commonly packaged in the fcoe-utils package.