| /* |
| * MPC834x SYS board specific routines |
| * |
| * Maintainer: Kumar Gala <galak@kernel.crashing.org> |
| * |
| * Copyright 2005 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| #include <linux/stddef.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/reboot.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/major.h> |
| #include <linux/console.h> |
| #include <linux/delay.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| #include <linux/serial.h> |
| #include <linux/tty.h> /* for linux/serial_core.h */ |
| #include <linux/serial_core.h> |
| #include <linux/initrd.h> |
| #include <linux/module.h> |
| #include <linux/fsl_devices.h> |
| |
| #include <asm/system.h> |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <asm/atomic.h> |
| #include <asm/time.h> |
| #include <asm/io.h> |
| #include <asm/machdep.h> |
| #include <asm/ipic.h> |
| #include <asm/bootinfo.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/mpc83xx.h> |
| #include <asm/irq.h> |
| #include <asm/kgdb.h> |
| #include <asm/ppc_sys.h> |
| #include <mm/mmu_decl.h> |
| |
| #include <syslib/ppc83xx_setup.h> |
| |
| #ifndef CONFIG_PCI |
| unsigned long isa_io_base = 0; |
| unsigned long isa_mem_base = 0; |
| #endif |
| |
| extern unsigned long total_memory; /* in mm/init */ |
| |
| unsigned char __res[sizeof (bd_t)]; |
| |
| #ifdef CONFIG_PCI |
| int |
| mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) |
| { |
| static char pci_irq_table[][4] = |
| /* |
| * PCI IDSEL/INTPIN->INTLINE |
| * A B C D |
| */ |
| { |
| {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ |
| {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ |
| {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x13 */ |
| {0, 0, 0, 0}, |
| {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x15 */ |
| {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x16 */ |
| {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x17 */ |
| {PIRQB, PIRQC, PIRQD, PIRQA}, /* idsel 0x18 */ |
| {0, 0, 0, 0}, /* idsel 0x19 */ |
| {0, 0, 0, 0}, /* idsel 0x20 */ |
| }; |
| |
| const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4; |
| return PCI_IRQ_TABLE_LOOKUP; |
| } |
| |
| int |
| mpc83xx_exclude_device(u_char bus, u_char devfn) |
| { |
| return PCIBIOS_SUCCESSFUL; |
| } |
| #endif /* CONFIG_PCI */ |
| |
| /* ************************************************************************ |
| * |
| * Setup the architecture |
| * |
| */ |
| static void __init |
| mpc834x_sys_setup_arch(void) |
| { |
| bd_t *binfo = (bd_t *) __res; |
| unsigned int freq; |
| struct gianfar_platform_data *pdata; |
| struct gianfar_mdio_data *mdata; |
| |
| /* get the core frequency */ |
| freq = binfo->bi_intfreq; |
| |
| /* Set loops_per_jiffy to a half-way reasonable value, |
| for use until calibrate_delay gets called. */ |
| loops_per_jiffy = freq / HZ; |
| |
| #ifdef CONFIG_PCI |
| /* setup PCI host bridges */ |
| mpc83xx_setup_hose(); |
| #endif |
| mpc83xx_early_serial_map(); |
| |
| /* setup the board related info for the MDIO bus */ |
| mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC83xx_MDIO); |
| |
| mdata->irq[0] = MPC83xx_IRQ_EXT1; |
| mdata->irq[1] = MPC83xx_IRQ_EXT2; |
| mdata->irq[2] = -1; |
| mdata->irq[31] = -1; |
| |
| /* setup the board related information for the enet controllers */ |
| pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1); |
| if (pdata) { |
| pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; |
| pdata->bus_id = 0; |
| pdata->phy_id = 0; |
| memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); |
| } |
| |
| pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC2); |
| if (pdata) { |
| pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; |
| pdata->bus_id = 0; |
| pdata->phy_id = 1; |
| memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); |
| } |
| |
| #ifdef CONFIG_BLK_DEV_INITRD |
| if (initrd_start) |
| ROOT_DEV = Root_RAM0; |
| else |
| #endif |
| #ifdef CONFIG_ROOT_NFS |
| ROOT_DEV = Root_NFS; |
| #else |
| ROOT_DEV = Root_HDA1; |
| #endif |
| } |
| |
| static void __init |
| mpc834x_sys_map_io(void) |
| { |
| /* we steal the lowest ioremap addr for virt space */ |
| io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO); |
| } |
| |
| int |
| mpc834x_sys_show_cpuinfo(struct seq_file *m) |
| { |
| uint pvid, svid, phid1; |
| bd_t *binfo = (bd_t *) __res; |
| unsigned int freq; |
| |
| /* get the core frequency */ |
| freq = binfo->bi_intfreq; |
| |
| pvid = mfspr(SPRN_PVR); |
| svid = mfspr(SPRN_SVR); |
| |
| seq_printf(m, "Vendor\t\t: Freescale Inc.\n"); |
| seq_printf(m, "Machine\t\t: mpc%s sys\n", cur_ppc_sys_spec->ppc_sys_name); |
| seq_printf(m, "core clock\t: %d MHz\n" |
| "bus clock\t: %d MHz\n", |
| (int)(binfo->bi_intfreq / 1000000), |
| (int)(binfo->bi_busfreq / 1000000)); |
| seq_printf(m, "PVR\t\t: 0x%x\n", pvid); |
| seq_printf(m, "SVR\t\t: 0x%x\n", svid); |
| |
| /* Display cpu Pll setting */ |
| phid1 = mfspr(SPRN_HID1); |
| seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); |
| |
| /* Display the amount of memory */ |
| seq_printf(m, "Memory\t\t: %d MB\n", (int)(binfo->bi_memsize / (1024 * 1024))); |
| |
| return 0; |
| } |
| |
| |
| void __init |
| mpc834x_sys_init_IRQ(void) |
| { |
| bd_t *binfo = (bd_t *) __res; |
| |
| u8 senses[8] = { |
| 0, /* EXT 0 */ |
| IRQ_SENSE_LEVEL, /* EXT 1 */ |
| IRQ_SENSE_LEVEL, /* EXT 2 */ |
| 0, /* EXT 3 */ |
| #ifdef CONFIG_PCI |
| IRQ_SENSE_LEVEL, /* EXT 4 */ |
| IRQ_SENSE_LEVEL, /* EXT 5 */ |
| IRQ_SENSE_LEVEL, /* EXT 6 */ |
| IRQ_SENSE_LEVEL, /* EXT 7 */ |
| #else |
| 0, /* EXT 4 */ |
| 0, /* EXT 5 */ |
| 0, /* EXT 6 */ |
| 0, /* EXT 7 */ |
| #endif |
| }; |
| |
| ipic_init(binfo->bi_immr_base + 0x00700, 0, MPC83xx_IPIC_IRQ_OFFSET, senses, 8); |
| |
| /* Initialize the default interrupt mapping priorities, |
| * in case the boot rom changed something on us. |
| */ |
| ipic_set_default_priority(); |
| } |
| |
| #if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) |
| extern ulong ds1374_get_rtc_time(void); |
| extern int ds1374_set_rtc_time(ulong); |
| |
| static int __init |
| mpc834x_rtc_hookup(void) |
| { |
| struct timespec tv; |
| |
| ppc_md.get_rtc_time = ds1374_get_rtc_time; |
| ppc_md.set_rtc_time = ds1374_set_rtc_time; |
| |
| tv.tv_nsec = 0; |
| tv.tv_sec = (ppc_md.get_rtc_time)(); |
| do_settimeofday(&tv); |
| |
| return 0; |
| } |
| late_initcall(mpc834x_rtc_hookup); |
| #endif |
| static __inline__ void |
| mpc834x_sys_set_bat(void) |
| { |
| /* we steal the lowest ioremap addr for virt space */ |
| mb(); |
| mtspr(SPRN_DBAT1U, VIRT_IMMRBAR | 0x1e); |
| mtspr(SPRN_DBAT1L, immrbar | 0x2a); |
| mb(); |
| } |
| |
| void __init |
| platform_init(unsigned long r3, unsigned long r4, unsigned long r5, |
| unsigned long r6, unsigned long r7) |
| { |
| bd_t *binfo = (bd_t *) __res; |
| |
| /* parse_bootinfo must always be called first */ |
| parse_bootinfo(find_bootinfo()); |
| |
| /* |
| * If we were passed in a board information, copy it into the |
| * residual data area. |
| */ |
| if (r3) { |
| memcpy((void *) __res, (void *) (r3 + KERNELBASE), |
| sizeof (bd_t)); |
| } |
| |
| #if defined(CONFIG_BLK_DEV_INITRD) |
| /* |
| * If the init RAM disk has been configured in, and there's a valid |
| * starting address for it, set it up. |
| */ |
| if (r4) { |
| initrd_start = r4 + KERNELBASE; |
| initrd_end = r5 + KERNELBASE; |
| } |
| #endif /* CONFIG_BLK_DEV_INITRD */ |
| |
| /* Copy the kernel command line arguments to a safe place. */ |
| if (r6) { |
| *(char *) (r7 + KERNELBASE) = 0; |
| strcpy(cmd_line, (char *) (r6 + KERNELBASE)); |
| } |
| |
| immrbar = binfo->bi_immr_base; |
| |
| mpc834x_sys_set_bat(); |
| |
| #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) |
| { |
| struct uart_port p; |
| |
| memset(&p, 0, sizeof (p)); |
| p.iotype = UPIO_MEM; |
| p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4500); |
| p.uartclk = binfo->bi_busfreq; |
| |
| gen550_init(0, &p); |
| |
| memset(&p, 0, sizeof (p)); |
| p.iotype = UPIO_MEM; |
| p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4600); |
| p.uartclk = binfo->bi_busfreq; |
| |
| gen550_init(1, &p); |
| } |
| #endif |
| |
| identify_ppc_sys_by_id(mfspr(SPRN_SVR)); |
| |
| /* setup the PowerPC module struct */ |
| ppc_md.setup_arch = mpc834x_sys_setup_arch; |
| ppc_md.show_cpuinfo = mpc834x_sys_show_cpuinfo; |
| |
| ppc_md.init_IRQ = mpc834x_sys_init_IRQ; |
| ppc_md.get_irq = ipic_get_irq; |
| |
| ppc_md.restart = mpc83xx_restart; |
| ppc_md.power_off = mpc83xx_power_off; |
| ppc_md.halt = mpc83xx_halt; |
| |
| ppc_md.find_end_of_memory = mpc83xx_find_end_of_memory; |
| ppc_md.setup_io_mappings = mpc834x_sys_map_io; |
| |
| ppc_md.time_init = mpc83xx_time_init; |
| ppc_md.set_rtc_time = NULL; |
| ppc_md.get_rtc_time = NULL; |
| ppc_md.calibrate_decr = mpc83xx_calibrate_decr; |
| |
| ppc_md.early_serial_map = mpc83xx_early_serial_map; |
| #if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) |
| ppc_md.progress = gen550_progress; |
| #endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ |
| |
| if (ppc_md.progress) |
| ppc_md.progress("mpc834x_sys_init(): exit", 0); |
| |
| return; |
| } |