| /* |
| * ieee80211softmac.h - public interface to the softmac |
| * |
| * Copyright (c) 2005 Johannes Berg <johannes@sipsolutions.net> |
| * Joseph Jezak <josejx@gentoo.org> |
| * Larry Finger <Larry.Finger@lwfinger.net> |
| * Danny van Dyk <kugelfang@gentoo.org> |
| * Michael Buesch <mbuesch@freenet.de> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| * |
| * The full GNU General Public License is included in this distribution in the |
| * file called COPYING. |
| */ |
| |
| #ifndef IEEE80211SOFTMAC_H_ |
| #define IEEE80211SOFTMAC_H_ |
| |
| #include <linux/kernel.h> |
| #include <linux/spinlock.h> |
| #include <linux/workqueue.h> |
| #include <linux/list.h> |
| #include <net/ieee80211.h> |
| |
| /* Once the API is considered more or less stable, |
| * this should be incremented on API incompatible changes. |
| */ |
| #define IEEE80211SOFTMAC_API 0 |
| |
| #define IEEE80211SOFTMAC_MAX_RATES_LEN 8 |
| #define IEEE80211SOFTMAC_MAX_EX_RATES_LEN 255 |
| |
| struct ieee80211softmac_ratesinfo { |
| u8 count; |
| u8 rates[IEEE80211SOFTMAC_MAX_RATES_LEN + IEEE80211SOFTMAC_MAX_EX_RATES_LEN]; |
| }; |
| |
| /* internal structures */ |
| struct ieee80211softmac_network; |
| struct ieee80211softmac_scaninfo; |
| |
| struct ieee80211softmac_essid { |
| u8 len; |
| char data[IW_ESSID_MAX_SIZE+1]; |
| }; |
| |
| struct ieee80211softmac_wpa { |
| char *IE; |
| int IElen; |
| int IEbuflen; |
| }; |
| |
| /* |
| * Information about association |
| * |
| * Do we need a lock for this? |
| * We only ever use this structure inlined |
| * into our global struct. I've used its lock, |
| * but maybe we need a local one here? |
| */ |
| struct ieee80211softmac_assoc_info { |
| /* |
| * This is the requested ESSID. It is written |
| * only by the WX handlers. |
| * |
| */ |
| struct ieee80211softmac_essid req_essid; |
| /* |
| * the ESSID of the network we're currently |
| * associated (or trying) to. This is |
| * updated to the network's actual ESSID |
| * even if the requested ESSID was 'ANY' |
| */ |
| struct ieee80211softmac_essid associate_essid; |
| |
| /* BSSID we're trying to associate to */ |
| char bssid[ETH_ALEN]; |
| |
| /* Rates supported by the network */ |
| struct ieee80211softmac_ratesinfo supported_rates; |
| |
| /* some flags. |
| * static_essid is valid if the essid is constant, |
| * this is for use by the wx handlers only. |
| * |
| * associating is true, if the network has been |
| * auth'ed on and we are in the process of associating. |
| * |
| * bssvalid is true if we found a matching network |
| * and saved it's BSSID into the bssid above. |
| * |
| * bssfixed is used for SIOCSIWAP. |
| */ |
| u8 static_essid:1, |
| associating:1, |
| assoc_wait:1, |
| bssvalid:1, |
| bssfixed:1; |
| |
| /* Scan retries remaining */ |
| int scan_retry; |
| |
| struct work_struct work; |
| struct work_struct timeout; |
| }; |
| |
| enum { |
| IEEE80211SOFTMAC_AUTH_OPEN_REQUEST = 1, |
| IEEE80211SOFTMAC_AUTH_OPEN_RESPONSE = 2, |
| }; |
| |
| enum { |
| IEEE80211SOFTMAC_AUTH_SHARED_REQUEST = 1, |
| IEEE80211SOFTMAC_AUTH_SHARED_CHALLENGE = 2, |
| IEEE80211SOFTMAC_AUTH_SHARED_RESPONSE = 3, |
| IEEE80211SOFTMAC_AUTH_SHARED_PASS = 4, |
| }; |
| |
| /* We should make these tunable |
| * AUTH_TIMEOUT seems really long, but that's what it is in BSD */ |
| #define IEEE80211SOFTMAC_AUTH_TIMEOUT (12 * HZ) |
| #define IEEE80211SOFTMAC_AUTH_RETRY_LIMIT 5 |
| #define IEEE80211SOFTMAC_ASSOC_SCAN_RETRY_LIMIT 3 |
| |
| struct ieee80211softmac_txrates { |
| /* The Bit-Rate to be used for multicast frames. */ |
| u8 mcast_rate; |
| |
| /* The Bit-Rate to be used for multicast management frames. */ |
| u8 mgt_mcast_rate; |
| |
| /* The Bit-Rate to be used for any other (normal) data packet. */ |
| u8 default_rate; |
| /* The Bit-Rate to be used for default fallback |
| * (If the device supports fallback and hardware-retry) |
| */ |
| u8 default_fallback; |
| |
| /* This is the rate that the user asked for */ |
| u8 user_rate; |
| }; |
| |
| /* Bits for txrates_change callback. */ |
| #define IEEE80211SOFTMAC_TXRATECHG_DEFAULT (1 << 0) /* default_rate */ |
| #define IEEE80211SOFTMAC_TXRATECHG_DEFAULT_FBACK (1 << 1) /* default_fallback */ |
| #define IEEE80211SOFTMAC_TXRATECHG_MCAST (1 << 2) /* mcast_rate */ |
| #define IEEE80211SOFTMAC_TXRATECHG_MGT_MCAST (1 << 3) /* mgt_mcast_rate */ |
| |
| struct ieee80211softmac_device { |
| /* 802.11 structure for data stuff */ |
| struct ieee80211_device *ieee; |
| struct net_device *dev; |
| |
| /* only valid if associated, then holds the Association ID */ |
| u16 association_id; |
| |
| /* the following methods are callbacks that the driver |
| * using this framework has to assign |
| */ |
| |
| /* always assign these */ |
| void (*set_bssid_filter)(struct net_device *dev, const u8 *bssid); |
| void (*set_channel)(struct net_device *dev, u8 channel); |
| |
| /* assign if you need it, informational only */ |
| void (*link_change)(struct net_device *dev); |
| |
| /* If the hardware can do scanning, assign _all_ three of these callbacks. |
| * When the scan finishes, call ieee80211softmac_scan_finished(). |
| */ |
| |
| /* when called, start_scan is guaranteed to not be called again |
| * until you call ieee80211softmac_scan_finished. |
| * Return 0 if scanning could start, error otherwise. |
| * SOFTMAC AUTHORS: don't call this, use ieee80211softmac_start_scan */ |
| int (*start_scan)(struct net_device *dev); |
| /* this should block until after ieee80211softmac_scan_finished was called |
| * SOFTMAC AUTHORS: don't call this, use ieee80211softmac_wait_for_scan */ |
| void (*wait_for_scan)(struct net_device *dev); |
| /* stop_scan aborts a scan, but is asynchronous. |
| * if you want to wait for it too, use wait_for_scan |
| * SOFTMAC AUTHORS: don't call this, use ieee80211softmac_stop_scan */ |
| void (*stop_scan)(struct net_device *dev); |
| |
| /* we'll need something about beacons here too, for AP or ad-hoc modes */ |
| |
| /* Transmission rates to be used by the driver. |
| * The SoftMAC figures out the best possible rates. |
| * The driver just needs to read them. |
| */ |
| struct ieee80211softmac_txrates txrates; |
| /* If the driver needs to do stuff on TX rate changes, assign this callback. */ |
| void (*txrates_change)(struct net_device *dev, |
| u32 changes, /* see IEEE80211SOFTMAC_TXRATECHG flags */ |
| const struct ieee80211softmac_txrates *rates_before_change); |
| |
| /* private stuff follows */ |
| /* this lock protects this structure */ |
| spinlock_t lock; |
| |
| /* couple of flags */ |
| u8 scanning:1, /* protects scanning from being done multiple times at once */ |
| associated:1, |
| running:1; |
| |
| struct ieee80211softmac_scaninfo *scaninfo; |
| struct ieee80211softmac_assoc_info associnfo; |
| |
| struct list_head auth_queue; |
| struct list_head events; |
| |
| struct ieee80211softmac_ratesinfo ratesinfo; |
| int txrate_badness; |
| |
| /* WPA stuff */ |
| struct ieee80211softmac_wpa wpa; |
| |
| /* we need to keep a list of network structs we copied */ |
| struct list_head network_list; |
| |
| /* This must be the last item so that it points to the data |
| * allocated beyond this structure by alloc_ieee80211 */ |
| u8 priv[0]; |
| }; |
| |
| extern void ieee80211softmac_scan_finished(struct ieee80211softmac_device *sm); |
| |
| static inline void * ieee80211softmac_priv(struct net_device *dev) |
| { |
| return ((struct ieee80211softmac_device *)ieee80211_priv(dev))->priv; |
| } |
| |
| extern struct net_device * alloc_ieee80211softmac(int sizeof_priv); |
| extern void free_ieee80211softmac(struct net_device *dev); |
| |
| /* Call this function if you detect a lost TX fragment. |
| * (If the device indicates failure of ACK RX, for example.) |
| * It is wise to call this function if you are able to detect lost packets, |
| * because it contributes to the TX Rates auto adjustment. |
| */ |
| extern void ieee80211softmac_fragment_lost(struct net_device *dev, |
| u16 wireless_sequence_number); |
| /* Call this function before _start to tell the softmac what rates |
| * the hw supports. The rates parameter is copied, so you can |
| * free it right after calling this function. |
| * Note that the rates need to be sorted. */ |
| extern void ieee80211softmac_set_rates(struct net_device *dev, u8 count, u8 *rates); |
| |
| /* Helper function which advises you the rate at which a frame should be |
| * transmitted at. */ |
| static inline u8 ieee80211softmac_suggest_txrate(struct ieee80211softmac_device *mac, |
| int is_multicast, |
| int is_mgt) |
| { |
| struct ieee80211softmac_txrates *txrates = &mac->txrates; |
| |
| if (!mac->associated) |
| return txrates->mgt_mcast_rate; |
| |
| /* We are associated, sending unicast frame */ |
| if (!is_multicast) |
| return txrates->default_rate; |
| |
| /* We are associated, sending multicast frame */ |
| if (is_mgt) |
| return txrates->mgt_mcast_rate; |
| else |
| return txrates->mcast_rate; |
| } |
| |
| /* Start the SoftMAC. Call this after you initialized the device |
| * and it is ready to run. |
| */ |
| extern void ieee80211softmac_start(struct net_device *dev); |
| /* Stop the SoftMAC. Call this before you shutdown the device. */ |
| extern void ieee80211softmac_stop(struct net_device *dev); |
| |
| /* |
| * Event system |
| */ |
| |
| /* valid event types */ |
| #define IEEE80211SOFTMAC_EVENT_ANY -1 /*private use only*/ |
| #define IEEE80211SOFTMAC_EVENT_SCAN_FINISHED 0 |
| #define IEEE80211SOFTMAC_EVENT_ASSOCIATED 1 |
| #define IEEE80211SOFTMAC_EVENT_ASSOCIATE_FAILED 2 |
| #define IEEE80211SOFTMAC_EVENT_ASSOCIATE_TIMEOUT 3 |
| #define IEEE80211SOFTMAC_EVENT_AUTHENTICATED 4 |
| #define IEEE80211SOFTMAC_EVENT_AUTH_FAILED 5 |
| #define IEEE80211SOFTMAC_EVENT_AUTH_TIMEOUT 6 |
| #define IEEE80211SOFTMAC_EVENT_ASSOCIATE_NET_NOT_FOUND 7 |
| #define IEEE80211SOFTMAC_EVENT_DISASSOCIATED 8 |
| /* keep this updated! */ |
| #define IEEE80211SOFTMAC_EVENT_LAST 8 |
| /* |
| * If you want to be notified of certain events, you can call |
| * ieee80211softmac_notify[_atomic] with |
| * - event set to one of the constants below |
| * - fun set to a function pointer of the appropriate type |
| * - context set to the context data you want passed |
| * The return value is 0, or an error. |
| */ |
| typedef void (*notify_function_ptr)(struct net_device *dev, int event_type, void *context); |
| |
| #define ieee80211softmac_notify(dev, event, fun, context) ieee80211softmac_notify_gfp(dev, event, fun, context, GFP_KERNEL); |
| #define ieee80211softmac_notify_atomic(dev, event, fun, context) ieee80211softmac_notify_gfp(dev, event, fun, context, GFP_ATOMIC); |
| |
| extern int ieee80211softmac_notify_gfp(struct net_device *dev, |
| int event, notify_function_ptr fun, void *context, gfp_t gfp_mask); |
| |
| /* To clear pending work (for ifconfig down, etc.) */ |
| extern void |
| ieee80211softmac_clear_pending_work(struct ieee80211softmac_device *sm); |
| |
| #endif /* IEEE80211SOFTMAC_H_ */ |
