| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved. |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/kernel.h> |
| #include <linux/kdev_t.h> |
| #include <linux/string.h> |
| #include <linux/tty.h> |
| #include <linux/console.h> |
| #include <linux/timex.h> |
| #include <linux/sched.h> |
| #include <linux/ioport.h> |
| #include <linux/mm.h> |
| #include <linux/serial.h> |
| #include <linux/irq.h> |
| #include <linux/bootmem.h> |
| #include <linux/mmzone.h> |
| #include <linux/interrupt.h> |
| #include <linux/acpi.h> |
| #include <linux/compiler.h> |
| #include <linux/sched.h> |
| #include <linux/root_dev.h> |
| #include <linux/nodemask.h> |
| #include <linux/pm.h> |
| |
| #include <asm/io.h> |
| #include <asm/sal.h> |
| #include <asm/machvec.h> |
| #include <asm/system.h> |
| #include <asm/processor.h> |
| #include <asm/vga.h> |
| #include <asm/sn/arch.h> |
| #include <asm/sn/addrs.h> |
| #include <asm/sn/pda.h> |
| #include <asm/sn/nodepda.h> |
| #include <asm/sn/sn_cpuid.h> |
| #include <asm/sn/simulator.h> |
| #include <asm/sn/leds.h> |
| #include <asm/sn/bte.h> |
| #include <asm/sn/shub_mmr.h> |
| #include <asm/sn/clksupport.h> |
| #include <asm/sn/sn_sal.h> |
| #include <asm/sn/geo.h> |
| #include "xtalk/xwidgetdev.h" |
| #include "xtalk/hubdev.h" |
| #include <asm/sn/klconfig.h> |
| |
| |
| DEFINE_PER_CPU(struct pda_s, pda_percpu); |
| |
| #define MAX_PHYS_MEMORY (1UL << 49) /* 1 TB */ |
| |
| lboard_t *root_lboard[MAX_COMPACT_NODES]; |
| |
| extern void bte_init_node(nodepda_t *, cnodeid_t); |
| |
| extern void sn_timer_init(void); |
| extern unsigned long last_time_offset; |
| extern void (*ia64_mark_idle) (int); |
| extern void snidle(int); |
| extern unsigned char acpi_kbd_controller_present; |
| |
| unsigned long sn_rtc_cycles_per_second; |
| EXPORT_SYMBOL(sn_rtc_cycles_per_second); |
| |
| DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); |
| EXPORT_PER_CPU_SYMBOL(__sn_hub_info); |
| |
| DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_NUMNODES]); |
| EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid); |
| |
| DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda); |
| EXPORT_PER_CPU_SYMBOL(__sn_nodepda); |
| |
| partid_t sn_partid = -1; |
| EXPORT_SYMBOL(sn_partid); |
| char sn_system_serial_number_string[128]; |
| EXPORT_SYMBOL(sn_system_serial_number_string); |
| u64 sn_partition_serial_number; |
| EXPORT_SYMBOL(sn_partition_serial_number); |
| u8 sn_partition_id; |
| EXPORT_SYMBOL(sn_partition_id); |
| u8 sn_system_size; |
| EXPORT_SYMBOL(sn_system_size); |
| u8 sn_sharing_domain_size; |
| EXPORT_SYMBOL(sn_sharing_domain_size); |
| u8 sn_coherency_id; |
| EXPORT_SYMBOL(sn_coherency_id); |
| u8 sn_region_size; |
| EXPORT_SYMBOL(sn_region_size); |
| int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ |
| |
| short physical_node_map[MAX_PHYSNODE_ID]; |
| |
| EXPORT_SYMBOL(physical_node_map); |
| |
| int numionodes; |
| |
| static void sn_init_pdas(char **); |
| static void scan_for_ionodes(void); |
| |
| static nodepda_t *nodepdaindr[MAX_COMPACT_NODES]; |
| |
| /* |
| * The format of "screen_info" is strange, and due to early i386-setup |
| * code. This is just enough to make the console code think we're on a |
| * VGA color display. |
| */ |
| struct screen_info sn_screen_info = { |
| .orig_x = 0, |
| .orig_y = 0, |
| .orig_video_mode = 3, |
| .orig_video_cols = 80, |
| .orig_video_ega_bx = 3, |
| .orig_video_lines = 25, |
| .orig_video_isVGA = 1, |
| .orig_video_points = 16 |
| }; |
| |
| /* |
| * This is here so we can use the CMOS detection in ide-probe.c to |
| * determine what drives are present. In theory, we don't need this |
| * as the auto-detection could be done via ide-probe.c:do_probe() but |
| * in practice that would be much slower, which is painful when |
| * running in the simulator. Note that passing zeroes in DRIVE_INFO |
| * is sufficient (the IDE driver will autodetect the drive geometry). |
| */ |
| #ifdef CONFIG_IA64_GENERIC |
| extern char drive_info[4 * 16]; |
| #else |
| char drive_info[4 * 16]; |
| #endif |
| |
| /* |
| * Get nasid of current cpu early in boot before nodepda is initialized |
| */ |
| static int |
| boot_get_nasid(void) |
| { |
| int nasid; |
| |
| if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL)) |
| BUG(); |
| return nasid; |
| } |
| |
| /* |
| * This routine can only be used during init, since |
| * smp_boot_data is an init data structure. |
| * We have to use smp_boot_data.cpu_phys_id to find |
| * the physical id of the processor because the normal |
| * cpu_physical_id() relies on data structures that |
| * may not be initialized yet. |
| */ |
| |
| static int __init pxm_to_nasid(int pxm) |
| { |
| int i; |
| int nid; |
| |
| nid = pxm_to_nid_map[pxm]; |
| for (i = 0; i < num_node_memblks; i++) { |
| if (node_memblk[i].nid == nid) { |
| return NASID_GET(node_memblk[i].start_paddr); |
| } |
| } |
| return -1; |
| } |
| |
| /** |
| * early_sn_setup - early setup routine for SN platforms |
| * |
| * Sets up an initial console to aid debugging. Intended primarily |
| * for bringup. See start_kernel() in init/main.c. |
| */ |
| |
| void __init early_sn_setup(void) |
| { |
| efi_system_table_t *efi_systab; |
| efi_config_table_t *config_tables; |
| struct ia64_sal_systab *sal_systab; |
| struct ia64_sal_desc_entry_point *ep; |
| char *p; |
| int i, j; |
| |
| /* |
| * Parse enough of the SAL tables to locate the SAL entry point. Since, console |
| * IO on SN2 is done via SAL calls, early_printk won't work without this. |
| * |
| * This code duplicates some of the ACPI table parsing that is in efi.c & sal.c. |
| * Any changes to those file may have to be made hereas well. |
| */ |
| efi_systab = (efi_system_table_t *) __va(ia64_boot_param->efi_systab); |
| config_tables = __va(efi_systab->tables); |
| for (i = 0; i < efi_systab->nr_tables; i++) { |
| if (efi_guidcmp(config_tables[i].guid, SAL_SYSTEM_TABLE_GUID) == |
| 0) { |
| sal_systab = __va(config_tables[i].table); |
| p = (char *)(sal_systab + 1); |
| for (j = 0; j < sal_systab->entry_count; j++) { |
| if (*p == SAL_DESC_ENTRY_POINT) { |
| ep = (struct ia64_sal_desc_entry_point |
| *)p; |
| ia64_sal_handler_init(__va |
| (ep->sal_proc), |
| __va(ep->gp)); |
| return; |
| } |
| p += SAL_DESC_SIZE(*p); |
| } |
| } |
| } |
| /* Uh-oh, SAL not available?? */ |
| printk(KERN_ERR "failed to find SAL entry point\n"); |
| } |
| |
| extern int platform_intr_list[]; |
| extern nasid_t master_nasid; |
| static int __initdata shub_1_1_found = 0; |
| |
| /* |
| * sn_check_for_wars |
| * |
| * Set flag for enabling shub specific wars |
| */ |
| |
| static inline int __init is_shub_1_1(int nasid) |
| { |
| unsigned long id; |
| int rev; |
| |
| if (is_shub2()) |
| return 0; |
| id = REMOTE_HUB_L(nasid, SH1_SHUB_ID); |
| rev = (id & SH1_SHUB_ID_REVISION_MASK) >> SH1_SHUB_ID_REVISION_SHFT; |
| return rev <= 2; |
| } |
| |
| static void __init sn_check_for_wars(void) |
| { |
| int cnode; |
| |
| if (is_shub2()) { |
| /* none yet */ |
| } else { |
| for_each_online_node(cnode) { |
| if (is_shub_1_1(cnodeid_to_nasid(cnode))) |
| shub_1_1_found = 1; |
| } |
| } |
| } |
| |
| /** |
| * sn_setup - SN platform setup routine |
| * @cmdline_p: kernel command line |
| * |
| * Handles platform setup for SN machines. This includes determining |
| * the RTC frequency (via a SAL call), initializing secondary CPUs, and |
| * setting up per-node data areas. The console is also initialized here. |
| */ |
| void __init sn_setup(char **cmdline_p) |
| { |
| long status, ticks_per_sec, drift; |
| int pxm; |
| int major = sn_sal_rev_major(), minor = sn_sal_rev_minor(); |
| extern void sn_cpu_init(void); |
| |
| ia64_sn_plat_set_error_handling_features(); |
| |
| #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) |
| /* |
| * If there was a primary vga adapter identified through the |
| * EFI PCDP table, make it the preferred console. Otherwise |
| * zero out conswitchp. |
| */ |
| |
| if (vga_console_membase) { |
| /* usable vga ... make tty0 the preferred default console */ |
| add_preferred_console("tty", 0, NULL); |
| } else { |
| printk(KERN_DEBUG "SGI: Disabling VGA console\n"); |
| #ifdef CONFIG_DUMMY_CONSOLE |
| conswitchp = &dummy_con; |
| #else |
| conswitchp = NULL; |
| #endif /* CONFIG_DUMMY_CONSOLE */ |
| } |
| #endif /* def(CONFIG_VT) && def(CONFIG_VGA_CONSOLE) */ |
| |
| MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY; |
| |
| memset(physical_node_map, -1, sizeof(physical_node_map)); |
| for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++) |
| if (pxm_to_nid_map[pxm] != -1) |
| physical_node_map[pxm_to_nasid(pxm)] = |
| pxm_to_nid_map[pxm]; |
| |
| /* |
| * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard |
| * support here so we don't have to listen to failed keyboard probe |
| * messages. |
| */ |
| if ((major < 2 || (major == 2 && minor <= 9)) && |
| acpi_kbd_controller_present) { |
| printk(KERN_INFO "Disabling legacy keyboard support as prom " |
| "is too old and doesn't provide FADT\n"); |
| acpi_kbd_controller_present = 0; |
| } |
| |
| printk("SGI SAL version %x.%02x\n", major, minor); |
| |
| /* |
| * Confirm the SAL we're running on is recent enough... |
| */ |
| if ((major < SN_SAL_MIN_MAJOR) || (major == SN_SAL_MIN_MAJOR && |
| minor < SN_SAL_MIN_MINOR)) { |
| printk(KERN_ERR "This kernel needs SGI SAL version >= " |
| "%x.%02x\n", SN_SAL_MIN_MAJOR, SN_SAL_MIN_MINOR); |
| panic("PROM version too old\n"); |
| } |
| |
| master_nasid = boot_get_nasid(); |
| |
| status = |
| ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec, |
| &drift); |
| if (status != 0 || ticks_per_sec < 100000) { |
| printk(KERN_WARNING |
| "unable to determine platform RTC clock frequency, guessing.\n"); |
| /* PROM gives wrong value for clock freq. so guess */ |
| sn_rtc_cycles_per_second = 1000000000000UL / 30000UL; |
| } else |
| sn_rtc_cycles_per_second = ticks_per_sec; |
| |
| platform_intr_list[ACPI_INTERRUPT_CPEI] = IA64_CPE_VECTOR; |
| |
| /* |
| * we set the default root device to /dev/hda |
| * to make simulation easy |
| */ |
| ROOT_DEV = Root_HDA1; |
| |
| /* |
| * Create the PDAs and NODEPDAs for all the cpus. |
| */ |
| sn_init_pdas(cmdline_p); |
| |
| ia64_mark_idle = &snidle; |
| |
| /* |
| * For the bootcpu, we do this here. All other cpus will make the |
| * call as part of cpu_init in slave cpu initialization. |
| */ |
| sn_cpu_init(); |
| |
| #ifdef CONFIG_SMP |
| init_smp_config(); |
| #endif |
| screen_info = sn_screen_info; |
| |
| sn_timer_init(); |
| |
| /* |
| * set pm_power_off to a SAL call to allow |
| * sn machines to power off. The SAL call can be replaced |
| * by an ACPI interface call when ACPI is fully implemented |
| * for sn. |
| */ |
| pm_power_off = ia64_sn_power_down; |
| } |
| |
| /** |
| * sn_init_pdas - setup node data areas |
| * |
| * One time setup for Node Data Area. Called by sn_setup(). |
| */ |
| static void __init sn_init_pdas(char **cmdline_p) |
| { |
| cnodeid_t cnode; |
| |
| memset(sn_cnodeid_to_nasid, -1, |
| sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid))); |
| for_each_online_node(cnode) |
| sn_cnodeid_to_nasid[cnode] = |
| pxm_to_nasid(nid_to_pxm_map[cnode]); |
| |
| numionodes = num_online_nodes(); |
| scan_for_ionodes(); |
| |
| /* |
| * Allocate & initalize the nodepda for each node. |
| */ |
| for_each_online_node(cnode) { |
| nodepdaindr[cnode] = |
| alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t)); |
| memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); |
| memset(nodepdaindr[cnode]->phys_cpuid, -1, |
| sizeof(nodepdaindr[cnode]->phys_cpuid)); |
| } |
| |
| /* |
| * Allocate & initialize nodepda for TIOs. For now, put them on node 0. |
| */ |
| for (cnode = num_online_nodes(); cnode < numionodes; cnode++) { |
| nodepdaindr[cnode] = |
| alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t)); |
| memset(nodepdaindr[cnode], 0, sizeof(nodepda_t)); |
| } |
| |
| /* |
| * Now copy the array of nodepda pointers to each nodepda. |
| */ |
| for (cnode = 0; cnode < numionodes; cnode++) |
| memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr, |
| sizeof(nodepdaindr)); |
| |
| /* |
| * Set up IO related platform-dependent nodepda fields. |
| * The following routine actually sets up the hubinfo struct |
| * in nodepda. |
| */ |
| for_each_online_node(cnode) { |
| bte_init_node(nodepdaindr[cnode], cnode); |
| } |
| |
| /* |
| * Initialize the per node hubdev. This includes IO Nodes and |
| * headless/memless nodes. |
| */ |
| for (cnode = 0; cnode < numionodes; cnode++) { |
| hubdev_init_node(nodepdaindr[cnode], cnode); |
| } |
| } |
| |
| /** |
| * sn_cpu_init - initialize per-cpu data areas |
| * @cpuid: cpuid of the caller |
| * |
| * Called during cpu initialization on each cpu as it starts. |
| * Currently, initializes the per-cpu data area for SNIA. |
| * Also sets up a few fields in the nodepda. Also known as |
| * platform_cpu_init() by the ia64 machvec code. |
| */ |
| void __init sn_cpu_init(void) |
| { |
| int cpuid; |
| int cpuphyid; |
| int nasid; |
| int subnode; |
| int slice; |
| int cnode; |
| int i; |
| static int wars_have_been_checked; |
| |
| if (smp_processor_id() == 0 && IS_MEDUSA()) { |
| if (ia64_sn_is_fake_prom()) |
| sn_prom_type = 2; |
| else |
| sn_prom_type = 1; |
| printk("Running on medusa with %s PROM\n", (sn_prom_type == 1) ? "real" : "fake"); |
| } |
| |
| memset(pda, 0, sizeof(pda)); |
| if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift, |
| &sn_system_size, &sn_sharing_domain_size, &sn_partition_id, |
| &sn_coherency_id, &sn_region_size)) |
| BUG(); |
| sn_hub_info->as_shift = sn_hub_info->nasid_shift - 2; |
| |
| /* |
| * The boot cpu makes this call again after platform initialization is |
| * complete. |
| */ |
| if (nodepdaindr[0] == NULL) |
| return; |
| |
| cpuid = smp_processor_id(); |
| cpuphyid = get_sapicid(); |
| |
| if (ia64_sn_get_sapic_info(cpuphyid, &nasid, &subnode, &slice)) |
| BUG(); |
| |
| for (i=0; i < MAX_NUMNODES; i++) { |
| if (nodepdaindr[i]) { |
| nodepdaindr[i]->phys_cpuid[cpuid].nasid = nasid; |
| nodepdaindr[i]->phys_cpuid[cpuid].slice = slice; |
| nodepdaindr[i]->phys_cpuid[cpuid].subnode = subnode; |
| } |
| } |
| |
| cnode = nasid_to_cnodeid(nasid); |
| |
| sn_nodepda = nodepdaindr[cnode]; |
| |
| pda->led_address = |
| (typeof(pda->led_address)) (LED0 + (slice << LED_CPU_SHIFT)); |
| pda->led_state = LED_ALWAYS_SET; |
| pda->hb_count = HZ / 2; |
| pda->hb_state = 0; |
| pda->idle_flag = 0; |
| |
| if (cpuid != 0) { |
| /* copy cpu 0's sn_cnodeid_to_nasid table to this cpu's */ |
| memcpy(sn_cnodeid_to_nasid, |
| (&per_cpu(__sn_cnodeid_to_nasid, 0)), |
| sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid))); |
| } |
| |
| /* |
| * Check for WARs. |
| * Only needs to be done once, on BSP. |
| * Has to be done after loop above, because it uses this cpu's |
| * sn_cnodeid_to_nasid table which was just initialized if this |
| * isn't cpu 0. |
| * Has to be done before assignment below. |
| */ |
| if (!wars_have_been_checked) { |
| sn_check_for_wars(); |
| wars_have_been_checked = 1; |
| } |
| sn_hub_info->shub_1_1_found = shub_1_1_found; |
| |
| /* |
| * Set up addresses of PIO/MEM write status registers. |
| */ |
| { |
| u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0}; |
| u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1, |
| SH2_PIO_WRITE_STATUS_2, SH2_PIO_WRITE_STATUS_3}; |
| u64 *pio; |
| pio = is_shub1() ? pio1 : pio2; |
| pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]); |
| pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0; |
| } |
| |
| /* |
| * WAR addresses for SHUB 1.x. |
| */ |
| if (local_node_data->active_cpu_count++ == 0 && is_shub1()) { |
| int buddy_nasid; |
| buddy_nasid = |
| cnodeid_to_nasid(numa_node_id() == |
| num_online_nodes() - 1 ? 0 : numa_node_id() + 1); |
| pda->pio_shub_war_cam_addr = |
| (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid, |
| SH1_PI_CAM_CONTROL); |
| } |
| } |
| |
| /* |
| * Scan klconfig for ionodes. Add the nasids to the |
| * physical_node_map and the pda and increment numionodes. |
| */ |
| |
| static void __init scan_for_ionodes(void) |
| { |
| int nasid = 0; |
| lboard_t *brd; |
| |
| /* fakeprom does not support klgraph */ |
| if (IS_RUNNING_ON_FAKE_PROM()) |
| return; |
| |
| /* Setup ionodes with memory */ |
| for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { |
| char *klgraph_header; |
| cnodeid_t cnodeid; |
| |
| if (physical_node_map[nasid] == -1) |
| continue; |
| |
| cnodeid = -1; |
| klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid)); |
| if (!klgraph_header) { |
| BUG(); /* All nodes must have klconfig tables! */ |
| } |
| cnodeid = nasid_to_cnodeid(nasid); |
| root_lboard[cnodeid] = (lboard_t *) |
| NODE_OFFSET_TO_LBOARD((nasid), |
| ((kl_config_hdr_t |
| *) (klgraph_header))-> |
| ch_board_info); |
| } |
| |
| /* Scan headless/memless IO Nodes. */ |
| for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { |
| /* if there's no nasid, don't try to read the klconfig on the node */ |
| if (physical_node_map[nasid] == -1) |
| continue; |
| brd = find_lboard_any((lboard_t *) |
| root_lboard[nasid_to_cnodeid(nasid)], |
| KLTYPE_SNIA); |
| if (brd) { |
| brd = KLCF_NEXT_ANY(brd); /* Skip this node's lboard */ |
| if (!brd) |
| continue; |
| } |
| |
| brd = find_lboard_any(brd, KLTYPE_SNIA); |
| |
| while (brd) { |
| sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid; |
| physical_node_map[brd->brd_nasid] = numionodes; |
| root_lboard[numionodes] = brd; |
| numionodes++; |
| brd = KLCF_NEXT_ANY(brd); |
| if (!brd) |
| break; |
| |
| brd = find_lboard_any(brd, KLTYPE_SNIA); |
| } |
| } |
| |
| /* Scan for TIO nodes. */ |
| for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) { |
| /* if there's no nasid, don't try to read the klconfig on the node */ |
| if (physical_node_map[nasid] == -1) |
| continue; |
| brd = find_lboard_any((lboard_t *) |
| root_lboard[nasid_to_cnodeid(nasid)], |
| KLTYPE_TIO); |
| while (brd) { |
| sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid; |
| physical_node_map[brd->brd_nasid] = numionodes; |
| root_lboard[numionodes] = brd; |
| numionodes++; |
| brd = KLCF_NEXT_ANY(brd); |
| if (!brd) |
| break; |
| |
| brd = find_lboard_any(brd, KLTYPE_TIO); |
| } |
| } |
| } |
| |
| int |
| nasid_slice_to_cpuid(int nasid, int slice) |
| { |
| long cpu; |
| |
| for (cpu=0; cpu < NR_CPUS; cpu++) |
| if (cpuid_to_nasid(cpu) == nasid && |
| cpuid_to_slice(cpu) == slice) |
| return cpu; |
| |
| return -1; |
| } |