blob: 7ca3d9e3b0fe22e426fb5419d76b9a4089224c7f [file] [log] [blame]
/*
* FAN53555 Fairchild Digitally Programmable TinyBuck Regulator Driver.
*
* Supported Part Numbers:
* FAN53555UC00X/01X/03X/04X/05X
*
* Copyright (c) 2012 Marvell Technology Ltd.
* Yunfan Zhang <yfzhang@marvell.com>
*
* This package is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/param.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/regmap.h>
#include <linux/regulator/fan53555.h>
/* Voltage setting */
#define FAN53555_VSEL0 0x00
#define FAN53555_VSEL1 0x01
/* Control register */
#define FAN53555_CONTROL 0x02
/* IC Type */
#define FAN53555_ID1 0x03
/* IC mask version */
#define FAN53555_ID2 0x04
/* Monitor register */
#define FAN53555_MONITOR 0x05
/* VSEL bit definitions */
#define VSEL_BUCK_EN (1 << 7)
#define VSEL_MODE (1 << 6)
#define VSEL_NSEL_MASK 0x3F
/* Chip ID and Verison */
#define DIE_ID 0x0F /* ID1 */
#define DIE_REV 0x0F /* ID2 */
/* Control bit definitions */
#define CTL_OUTPUT_DISCHG (1 << 7)
#define CTL_SLEW_MASK (0x7 << 4)
#define CTL_SLEW_SHIFT 4
#define CTL_RESET (1 << 2)
#define FAN53555_NVOLTAGES 64 /* Numbers of voltages */
/* IC Type */
enum {
FAN53555_CHIP_ID_00 = 0,
FAN53555_CHIP_ID_01,
FAN53555_CHIP_ID_02,
FAN53555_CHIP_ID_03,
FAN53555_CHIP_ID_04,
FAN53555_CHIP_ID_05,
};
struct fan53555_device_info {
struct regmap *regmap;
struct device *dev;
struct regulator_desc desc;
struct regulator_dev *rdev;
struct regulator_init_data *regulator;
/* IC Type and Rev */
int chip_id;
int chip_rev;
/* Voltage setting register */
unsigned int vol_reg;
unsigned int sleep_reg;
/* Voltage range and step(linear) */
unsigned int vsel_min;
unsigned int vsel_step;
/* Voltage slew rate limiting */
unsigned int slew_rate;
/* Sleep voltage cache */
unsigned int sleep_vol_cache;
};
static int fan53555_set_suspend_voltage(struct regulator_dev *rdev, int uV)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
int ret;
if (di->sleep_vol_cache == uV)
return 0;
ret = regulator_map_voltage_linear(rdev, uV, uV);
if (ret < 0)
return -EINVAL;
ret = regmap_update_bits(di->regmap, di->sleep_reg,
VSEL_NSEL_MASK, ret);
if (ret < 0)
return -EINVAL;
/* Cache the sleep voltage setting.
* Might not be the real voltage which is rounded */
di->sleep_vol_cache = uV;
return 0;
}
static int fan53555_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
switch (mode) {
case REGULATOR_MODE_FAST:
regmap_update_bits(di->regmap, di->vol_reg,
VSEL_MODE, VSEL_MODE);
break;
case REGULATOR_MODE_NORMAL:
regmap_update_bits(di->regmap, di->vol_reg, VSEL_MODE, 0);
break;
default:
return -EINVAL;
}
return 0;
}
static unsigned int fan53555_get_mode(struct regulator_dev *rdev)
{
struct fan53555_device_info *di = rdev_get_drvdata(rdev);
unsigned int val;
int ret = 0;
ret = regmap_read(di->regmap, di->vol_reg, &val);
if (ret < 0)
return ret;
if (val & VSEL_MODE)
return REGULATOR_MODE_FAST;
else
return REGULATOR_MODE_NORMAL;
}
static struct regulator_ops fan53555_regulator_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.map_voltage = regulator_map_voltage_linear,
.list_voltage = regulator_list_voltage_linear,
.set_suspend_voltage = fan53555_set_suspend_voltage,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_mode = fan53555_set_mode,
.get_mode = fan53555_get_mode,
};
/* For 00,01,03,05 options:
* VOUT = 0.60V + NSELx * 10mV, from 0.60 to 1.23V.
* For 04 option:
* VOUT = 0.603V + NSELx * 12.826mV, from 0.603 to 1.411V.
* */
static int fan53555_device_setup(struct fan53555_device_info *di,
struct fan53555_platform_data *pdata)
{
unsigned int reg, data, mask;
/* Setup voltage control register */
switch (pdata->sleep_vsel_id) {
case FAN53555_VSEL_ID_0:
di->sleep_reg = FAN53555_VSEL0;
di->vol_reg = FAN53555_VSEL1;
break;
case FAN53555_VSEL_ID_1:
di->sleep_reg = FAN53555_VSEL1;
di->vol_reg = FAN53555_VSEL0;
break;
default:
dev_err(di->dev, "Invalid VSEL ID!\n");
return -EINVAL;
}
/* Init voltage range and step */
switch (di->chip_id) {
case FAN53555_CHIP_ID_00:
case FAN53555_CHIP_ID_01:
case FAN53555_CHIP_ID_03:
case FAN53555_CHIP_ID_05:
di->vsel_min = 600000;
di->vsel_step = 10000;
break;
case FAN53555_CHIP_ID_04:
di->vsel_min = 603000;
di->vsel_step = 12826;
break;
default:
dev_err(di->dev,
"Chip ID[%d]\n not supported!\n", di->chip_id);
return -EINVAL;
}
/* Init slew rate */
if (pdata->slew_rate & 0x7)
di->slew_rate = pdata->slew_rate;
else
di->slew_rate = FAN53555_SLEW_RATE_64MV;
reg = FAN53555_CONTROL;
data = di->slew_rate << CTL_SLEW_SHIFT;
mask = CTL_SLEW_MASK;
return regmap_update_bits(di->regmap, reg, mask, data);
}
static int fan53555_regulator_register(struct fan53555_device_info *di,
struct regulator_config *config)
{
struct regulator_desc *rdesc = &di->desc;
rdesc->name = "fan53555-reg";
rdesc->ops = &fan53555_regulator_ops;
rdesc->type = REGULATOR_VOLTAGE;
rdesc->n_voltages = FAN53555_NVOLTAGES;
rdesc->enable_reg = di->vol_reg;
rdesc->enable_mask = VSEL_BUCK_EN;
rdesc->min_uV = di->vsel_min;
rdesc->uV_step = di->vsel_step;
rdesc->vsel_reg = di->vol_reg;
rdesc->vsel_mask = VSEL_NSEL_MASK;
rdesc->owner = THIS_MODULE;
di->rdev = devm_regulator_register(di->dev, &di->desc, config);
return PTR_ERR_OR_ZERO(di->rdev);
}
static struct regmap_config fan53555_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
static int fan53555_regulator_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct fan53555_device_info *di;
struct fan53555_platform_data *pdata;
struct regulator_config config = { };
unsigned int val;
int ret;
pdata = dev_get_platdata(&client->dev);
if (!pdata || !pdata->regulator) {
dev_err(&client->dev, "Platform data not found!\n");
return -ENODEV;
}
di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
GFP_KERNEL);
if (!di) {
dev_err(&client->dev, "Failed to allocate device info data!\n");
return -ENOMEM;
}
di->regmap = devm_regmap_init_i2c(client, &fan53555_regmap_config);
if (IS_ERR(di->regmap)) {
dev_err(&client->dev, "Failed to allocate regmap!\n");
return PTR_ERR(di->regmap);
}
di->dev = &client->dev;
di->regulator = pdata->regulator;
i2c_set_clientdata(client, di);
/* Get chip ID */
ret = regmap_read(di->regmap, FAN53555_ID1, &val);
if (ret < 0) {
dev_err(&client->dev, "Failed to get chip ID!\n");
return -ENODEV;
}
di->chip_id = val & DIE_ID;
/* Get chip revision */
ret = regmap_read(di->regmap, FAN53555_ID2, &val);
if (ret < 0) {
dev_err(&client->dev, "Failed to get chip Rev!\n");
return -ENODEV;
}
di->chip_rev = val & DIE_REV;
dev_info(&client->dev, "FAN53555 Option[%d] Rev[%d] Detected!\n",
di->chip_id, di->chip_rev);
/* Device init */
ret = fan53555_device_setup(di, pdata);
if (ret < 0) {
dev_err(&client->dev, "Failed to setup device!\n");
return ret;
}
/* Register regulator */
config.dev = di->dev;
config.init_data = di->regulator;
config.regmap = di->regmap;
config.driver_data = di;
ret = fan53555_regulator_register(di, &config);
if (ret < 0)
dev_err(&client->dev, "Failed to register regulator!\n");
return ret;
}
static const struct i2c_device_id fan53555_id[] = {
{"fan53555", -1},
{ },
};
static struct i2c_driver fan53555_regulator_driver = {
.driver = {
.name = "fan53555-regulator",
},
.probe = fan53555_regulator_probe,
.id_table = fan53555_id,
};
module_i2c_driver(fan53555_regulator_driver);
MODULE_AUTHOR("Yunfan Zhang <yfzhang@marvell.com>");
MODULE_DESCRIPTION("FAN53555 regulator driver");
MODULE_LICENSE("GPL v2");