| /* Driver for Realtek RTS51xx USB card reader |
| * Header file |
| * |
| * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2, or (at your option) any |
| * later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * Author: |
| * wwang (wei_wang@realsil.com.cn) |
| * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China |
| * Maintainer: |
| * Edwin Rong (edwin_rong@realsil.com.cn) |
| * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China |
| */ |
| |
| #ifndef __RTS51X_SCSI_H |
| #define __RTS51X_SCSI_H |
| |
| #include <linux/usb.h> |
| #include <linux/usb_usual.h> |
| #include <linux/blkdev.h> |
| #include <linux/completion.h> |
| #include <linux/mutex.h> |
| #include <scsi/scsi_host.h> |
| |
| #include "rts51x_chip.h" |
| |
| #define MS_SP_CMND 0xFA |
| #define MS_FORMAT 0xA0 |
| #define GET_MS_INFORMATION 0xB0 |
| |
| #define VENDOR_CMND 0xF0 |
| |
| #define READ_STATUS 0x09 |
| |
| #define READ_MEM 0x0D |
| #define WRITE_MEM 0x0E |
| #define GET_BUS_WIDTH 0x13 |
| #define GET_SD_CSD 0x14 |
| #define TOGGLE_GPIO 0x15 |
| #define TRACE_MSG 0x18 |
| |
| #define SCSI_APP_CMD 0x10 |
| |
| #define PP_READ10 0x1A |
| #define PP_WRITE10 0x0A |
| #define READ_HOST_REG 0x1D |
| #define WRITE_HOST_REG 0x0D |
| #define SET_VAR 0x05 |
| #define GET_VAR 0x15 |
| #define DMA_READ 0x16 |
| #define DMA_WRITE 0x06 |
| #define GET_DEV_STATUS 0x10 |
| #define SET_CHIP_MODE 0x27 |
| #define SUIT_CMD 0xE0 |
| #define WRITE_PHY 0x07 |
| #define READ_PHY 0x17 |
| |
| #define INIT_BATCHCMD 0x41 |
| #define ADD_BATCHCMD 0x42 |
| #define SEND_BATCHCMD 0x43 |
| #define GET_BATCHRSP 0x44 |
| |
| #ifdef SUPPORT_CPRM |
| /* SD Pass Through Command Extension */ |
| #define SD_PASS_THRU_MODE 0xD0 |
| #define SD_EXECUTE_NO_DATA 0xD1 |
| #define SD_EXECUTE_READ 0xD2 |
| #define SD_EXECUTE_WRITE 0xD3 |
| #define SD_GET_RSP 0xD4 |
| #define SD_HW_RST 0xD6 |
| #endif |
| |
| #ifdef SUPPORT_MAGIC_GATE |
| #define CMD_MSPRO_MG_RKEY 0xA4 /* Report Key Command */ |
| #define CMD_MSPRO_MG_SKEY 0xA3 /* Send Key Command */ |
| |
| /* CBWCB field: key class */ |
| #define KC_MG_R_PRO 0xBE /* MG-R PRO */ |
| |
| /* CBWCB field: key format */ |
| #define KF_SET_LEAF_ID 0x31 /* Set Leaf ID */ |
| #define KF_GET_LOC_EKB 0x32 /* Get Local EKB */ |
| #define KF_CHG_HOST 0x33 /* Challenge (host) */ |
| #define KF_RSP_CHG 0x34 /* Response and Challenge (device) */ |
| #define KF_RSP_HOST 0x35 /* Response (host) */ |
| #define KF_GET_ICV 0x36 /* Get ICV */ |
| #define KF_SET_ICV 0x37 /* SSet ICV */ |
| #endif |
| |
| struct rts51x_chip; |
| |
| /*----------------------------------- |
| Start-Stop-Unit |
| -----------------------------------*/ |
| #define STOP_MEDIUM 0x00 /* access disable */ |
| #define MAKE_MEDIUM_READY 0x01 /* access enable */ |
| #define UNLOAD_MEDIUM 0x02 /* unload */ |
| #define LOAD_MEDIUM 0x03 /* load */ |
| |
| /*----------------------------------- |
| STANDARD_INQUIRY |
| -----------------------------------*/ |
| #define QULIFIRE 0x00 |
| #define AENC_FNC 0x00 |
| #define TRML_IOP 0x00 |
| #define REL_ADR 0x00 |
| #define WBUS_32 0x00 |
| #define WBUS_16 0x00 |
| #define SYNC 0x00 |
| #define LINKED 0x00 |
| #define CMD_QUE 0x00 |
| #define SFT_RE 0x00 |
| |
| #define VEN_ID_LEN 8 /* Vendor ID Length */ |
| #define PRDCT_ID_LEN 16 /* Product ID Length */ |
| #define PRDCT_REV_LEN 4 /* Product LOT Length */ |
| |
| #define DRCT_ACCESS_DEV 0x00 /* Direct Access Device */ |
| #define RMB_DISC 0x80 /* The Device is Removable */ |
| #define ANSI_SCSI2 0x02 /* Based on ANSI-SCSI2 */ |
| |
| #define SCSI 0x00 /* Interface ID */ |
| |
| void rts51x_scsi_show_command(struct scsi_cmnd *srb); |
| void rts51x_set_sense_type(struct rts51x_chip *chip, unsigned int lun, int sense_type); |
| void rts51x_set_sense_data(struct rts51x_chip *chip, unsigned int lun, u8 err_code, |
| u8 sense_key, u32 info, u8 asc, u8 ascq, u8 sns_key_info0, |
| u16 sns_key_info1); |
| |
| int rts51x_scsi_handler(struct scsi_cmnd *srb, struct rts51x_chip *chip); |
| |
| struct Scsi_Host; |
| struct scsi_device; |
| struct scsi_cmnd; |
| |
| int slave_alloc(struct scsi_device *sdev); |
| int slave_configure(struct scsi_device *sdev); |
| int queuecommand(struct Scsi_Host *, struct scsi_cmnd *); |
| int command_abort(struct scsi_cmnd *srb); |
| int bus_reset(struct scsi_cmnd *srb); |
| |
| #endif /* __RTS51X_SCSI_H */ |
