| /* |
| * mbx_sh.h |
| * |
| * DSP-BIOS Bridge driver support functions for TI OMAP processors. |
| * |
| * Definitions for shared mailbox cmd/data values.(used on both |
| * the GPP and DSP sides). |
| * |
| * Copyright (C) 2008 Texas Instruments, Inc. |
| * |
| * This package is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED |
| * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. |
| */ |
| |
| /* |
| * Bridge usage of OMAP mailbox 1 is determined by the "class" of the |
| * mailbox interrupt's cmd value received. The class value are defined |
| * as a bit (10 thru 15) being set. |
| * |
| * Note: Only 16 bits of each is used. Other 16 bit data reg available. |
| * |
| * 16 bit Mbx bit defns: |
| * |
| * A). Exception/Error handling (Module DEH) : class = 0. |
| * |
| * 15 10 0 |
| * --------------------------------- |
| * |0|0|0|0|0|0|x|x|x|x|x|x|x|x|x|x| |
| * --------------------------------- |
| * | (class) | (module specific) | |
| * |
| * |
| * B: DSP-DMA link driver channels (DDMA) : class = 1. |
| * |
| * 15 10 0 |
| * --------------------------------- |
| * |0|0|0|0|0|1|b|b|b|b|b|c|c|c|c|c| |
| * --------------------------------- |
| * | (class) | (module specific) | |
| * |
| * where b -> buffer index (32 DDMA buffers/chnl max) |
| * c -> channel Id (32 DDMA chnls max) |
| * |
| * |
| * C: Proc-copy link driver channels (PCPY) : class = 2. |
| * |
| * 15 10 0 |
| * --------------------------------- |
| * |0|0|0|0|1|0|x|x|x|x|x|x|x|x|x|x| |
| * --------------------------------- |
| * | (class) | (module specific) | |
| * |
| * |
| * D: Zero-copy link driver channels (DDZC) : class = 4. |
| * |
| * 15 10 0 |
| * --------------------------------- |
| * |0|0|0|1|0|0|x|x|x|x|x|c|c|c|c|c| |
| * --------------------------------- |
| * | (class) | (module specific) | |
| * |
| * where x -> not used |
| * c -> channel Id (32 ZCPY chnls max) |
| * |
| * |
| * E: Power management : class = 8. |
| * |
| * 15 10 0 |
| * --------------------------------- |
| * |0|0|1|0|0|0|x|x|x|x|x|c|c|c|c|c| |
| |
| * 0010 00xx xxxc cccc |
| * 0010 00nn pppp qqqq |
| * nn: |
| * 00 = reserved |
| * 01 = pwr state change |
| * 10 = opp pre-change |
| * 11 = opp post-change |
| * |
| * if nn = pwr state change: |
| * pppp = don't care |
| * qqqq: |
| * 0010 = hibernate |
| * 0010 0001 0000 0010 |
| * 0110 = retention |
| * 0010 0001 0000 0110 |
| * others reserved |
| * |
| * if nn = opp pre-change: |
| * pppp = current opp |
| * qqqq = next opp |
| * |
| * if nn = opp post-change: |
| * pppp = prev opp |
| * qqqq = current opp |
| * |
| * --------------------------------- |
| * | (class) | (module specific) | |
| * |
| * where x -> not used |
| * c -> Power management command |
| * |
| */ |
| |
| #ifndef _MBX_SH_H |
| #define _MBX_SH_H |
| |
| #define MBX_PCPY_CLASS 0x0800 /* PROC-COPY " */ |
| #define MBX_PM_CLASS 0x2000 /* Power Management */ |
| #define MBX_DBG_CLASS 0x4000 /* For debugging purpose */ |
| |
| /* |
| * Exception Handler codes |
| * Magic code used to determine if DSP signaled exception. |
| */ |
| #define MBX_DEH_BASE 0x0 |
| #define MBX_DEH_USERS_BASE 0x100 /* 256 */ |
| #define MBX_DEH_LIMIT 0x3FF /* 1023 */ |
| #define MBX_DEH_RESET 0x101 /* DSP RESET (DEH) */ |
| |
| /* |
| * Link driver command/status codes. |
| */ |
| |
| /* Power Management Commands */ |
| #define MBX_PM_DSPIDLE (MBX_PM_CLASS + 0x0) |
| #define MBX_PM_DSPWAKEUP (MBX_PM_CLASS + 0x1) |
| #define MBX_PM_EMERGENCYSLEEP (MBX_PM_CLASS + 0x2) |
| #define MBX_PM_SETPOINT_PRENOTIFY (MBX_PM_CLASS + 0x6) |
| #define MBX_PM_SETPOINT_POSTNOTIFY (MBX_PM_CLASS + 0x7) |
| #define MBX_PM_DSPRETENTION (MBX_PM_CLASS + 0x8) |
| #define MBX_PM_DSPHIBERNATE (MBX_PM_CLASS + 0x9) |
| #define MBX_PM_HIBERNATE_EN (MBX_PM_CLASS + 0xA) |
| #define MBX_PM_OPP_REQ (MBX_PM_CLASS + 0xB) |
| |
| /* Bridge Debug Commands */ |
| #define MBX_DBG_SYSPRINTF (MBX_DBG_CLASS + 0x0) |
| |
| #endif /* _MBX_SH_H */ |
