drivers/staging/bcm/InterfaceIdleMode.c - linux/kernel/git/viro/vfs - Git at Google

 #include "headers.h"

 /*
 Function:				InterfaceIdleModeWakeup

 Description:			This is the hardware specific Function for waking up HW device from Idle mode.
 						A software abort pattern is written to the device to wake it and necessary power state
 						transitions from host are performed here.

 Input parameters:		IN struct bcm_mini_adapter *Adapter   - Miniport Adapter Context


 Return:				BCM_STATUS_SUCCESS - If Wakeup of the HW Interface was successful.
 						Other           - If an error occurred.
 */


 /*
 Function:				InterfaceIdleModeRespond

 Description:			This is the hardware specific Function for responding to Idle mode request from target.
 						Necessary power state transitions from host for idle mode or other device specific
 						initializations are performed here.

 Input parameters:		IN struct bcm_mini_adapter * Adapter   - Miniport Adapter Context


 Return:				BCM_STATUS_SUCCESS - If Idle mode response related HW configuration was successful.
 						Other           - If an error occurred.
 */

 /*
 "dmem bfc02f00  100" tells how many time device went in Idle mode.
 this value will be at address bfc02fa4.just before value d0ea1dle.

 Set time value by writing at bfc02f98 7d0

 checking the Ack timer expire on kannon by running command
 d qcslog .. if it shows e means host has not send response to f/w with in 200 ms. Response should be
 send to f/w with in 200 ms after the Idle/Shutdown req issued

 */


 int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *puiBuffer)
 {
 	int	status = STATUS_SUCCESS;
 	unsigned int	uiRegRead = 0;
 	int bytes;

 	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "SubType of Message :0x%X", ntohl(*puiBuffer));

 	if (ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, " Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
 		if (ntohl(*(puiBuffer+1)) == 0 ) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got IDLE MODE WAKE UP Response From F/W");

 			status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
 			if (status) {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
 				return status;
 			}

 			if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
 				uiRegRead = 0x00000000 ;
 				status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
 				if (status) {
 					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode	Reg");
 					return status;
 				}
 			}
 			/* Below Register should not br read in case of Manual and Protocol Idle mode */
 			else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
 				/* clear on read Register */
 				bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
 				if (bytes < 0) {
 					status = bytes;
 					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
 					return status;
 				}
 				/* clear on read Register */
 				bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead));
 				if (bytes < 0) {
 					status = bytes;
 					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort	Reg1");
 					return status;
 				}
 			}
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");

 			/* Set Idle Mode Flag to False and Clear IdleMode reg. */
 			Adapter->IdleMode = false;
 			Adapter->bTriedToWakeUpFromlowPowerMode = false;

 			wake_up(&Adapter->lowpower_mode_wait_queue);

 		} else {
 			if (TRUE == Adapter->IdleMode)
 			{
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device is already in Idle mode....");
 				return status ;
 			}

 			uiRegRead = 0;
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n");

 			if (Adapter->chip_id == BCS220_2 ||
 				Adapter->chip_id == BCS220_2BC ||
 					Adapter->chip_id == BCS250_BC ||
 					Adapter->chip_id == BCS220_3) {

 				bytes = rdmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
 				if (bytes < 0) {
 					status = bytes;
 					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n");
 					return status;
 				}


 				uiRegRead |= (1<<17);

 				status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
 				if (status) {
 					BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
 					return status;
 				}

 			}
 			SendIdleModeResponse(Adapter);
 		}
 	} else if (ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
 		OverrideServiceFlowParams(Adapter, puiBuffer);
 	}
 	return status;
 }

 static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int Pattern)
 {
 	int 	status = STATUS_SUCCESS;
 	unsigned int value;
 	unsigned int chip_id ;
 	unsigned long timeout = 0, itr = 0;

 	int 	lenwritten = 0;
 	unsigned char aucAbortPattern[8] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
 	struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter;

 	/* Abort Bus suspend if its already suspended */
 	if ((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) {
 		status = usb_autopm_get_interface(psInterfaceAdapter->interface);
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Bus got wakeup..Aborting Idle mode... status:%d \n", status);

 	}

 	if ((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
 									||
 	   (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)) {
 		/* write the SW abort pattern. */
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
 		status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
 		if (status) {
 				BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
 				return status;
 		}
 	}

 	if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
 		value = 0x80000000;
 		status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
 		if (status)
 		{
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
 			return status;
 		}
 	} else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
 		/*
 		 * Get a Interrupt Out URB and send 8 Bytes Down
 		 * To be Done in Thread Context.
 		 * Not using Asynchronous Mechanism.
 		 */
 		status = usb_interrupt_msg (psInterfaceAdapter->udev,
 			usb_sndintpipe(psInterfaceAdapter->udev,
 			psInterfaceAdapter->sIntrOut.int_out_endpointAddr),
 			aucAbortPattern,
 			8,
 			&lenwritten,
 			5000);
 		if (status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n", status);
 			return status;
 		} else {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);
 		}

 		/* mdelay(25); */

 		timeout = jiffies +  msecs_to_jiffies(50) ;
 		while ( timeout > jiffies ) {
 			itr++ ;
 			rdmalt(Adapter, CHIP_ID_REG, &chip_id, sizeof(UINT));
 			if (0xbece3200 == (chip_id&~(0xF0)))
 				chip_id = chip_id&~(0xF0);
 			if (chip_id == Adapter->chip_id)
 				break;
 		}
 		if (timeout < jiffies )
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Not able to read chip-id even after 25 msec");
 		else
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Number of completed iteration to read chip-id :%lu", itr);

 		status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
 		if (status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
 			return status;
 		}
 	}
 	return status;
 }
 int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter)
 {
 	ULONG	Status = 0;
 	if (Adapter->bTriedToWakeUpFromlowPowerMode) {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
 	} else {
 		BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing Low Power Mode Abort pattern to the Device\n");
 		Adapter->bTriedToWakeUpFromlowPowerMode = TRUE;
 		InterfaceAbortIdlemode(Adapter, Adapter->usIdleModePattern);

 	}
 	return Status;
 }

 void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
 {
 	unsigned int uiRegVal = 0;
 	INT Status = 0;
 	int bytes;

 	if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
 		/* clear idlemode interrupt. */
 		uiRegVal = 0;
 		Status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
 		if (Status) {
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
 			return;
 		}
 	}

     else {

         /* clear Interrupt EP registers. */
 		bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
 		if (bytes < 0) {
 			Status = bytes;
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
 			return;
 		}

 		bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
 		if (bytes < 0) {
 			Status = bytes;
 			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
 			return;
 		}
 	}
 }
	#include "headers.h"

	/*
	Function: InterfaceIdleModeWakeup

	Description: This is the hardware specific Function for waking up HW device from Idle mode.
	A software abort pattern is written to the device to wake it and necessary power state
	transitions from host are performed here.

	Input parameters: IN struct bcm_mini_adapter *Adapter - Miniport Adapter Context


	Return: BCM_STATUS_SUCCESS - If Wakeup of the HW Interface was successful.
	Other - If an error occurred.
	*/


	/*
	Function: InterfaceIdleModeRespond

	Description: This is the hardware specific Function for responding to Idle mode request from target.
	Necessary power state transitions from host for idle mode or other device specific
	initializations are performed here.

	Input parameters: IN struct bcm_mini_adapter * Adapter - Miniport Adapter Context


	Return: BCM_STATUS_SUCCESS - If Idle mode response related HW configuration was successful.
	Other - If an error occurred.
	*/

	/*
	"dmem bfc02f00 100" tells how many time device went in Idle mode.
	this value will be at address bfc02fa4.just before value d0ea1dle.

	Set time value by writing at bfc02f98 7d0

	checking the Ack timer expire on kannon by running command
	d qcslog .. if it shows e means host has not send response to f/w with in 200 ms. Response should be
	send to f/w with in 200 ms after the Idle/Shutdown req issued

	*/


	int InterfaceIdleModeRespond(struct bcm_mini_adapter Adapter, unsigned int puiBuffer)
	{
	int status = STATUS_SUCCESS;
	unsigned int uiRegRead = 0;
	int bytes;

	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "SubType of Message :0x%X", ntohl(*puiBuffer));

	if (ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, " Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
	if (ntohl(*(puiBuffer+1)) == 0 ) {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got IDLE MODE WAKE UP Response From F/W");

	status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
	if (status) {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
	return status;
	}

	if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
	uiRegRead = 0x00000000 ;
	status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
	if (status) {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
	return status;
	}
	}
	/* Below Register should not br read in case of Manual and Protocol Idle mode */
	else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
	/* clear on read Register */
	bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
	if (bytes < 0) {
	status = bytes;
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg0");
	return status;
	}
	/* clear on read Register */
	bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegRead, sizeof(uiRegRead));
	if (bytes < 0) {
	status = bytes;
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "rdm failed while clearing H/W Abort Reg1");
	return status;
	}
	}
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device Up from Idle Mode");

	/* Set Idle Mode Flag to False and Clear IdleMode reg. */
	Adapter->IdleMode = false;
	Adapter->bTriedToWakeUpFromlowPowerMode = false;

	wake_up(&Adapter->lowpower_mode_wait_queue);

	} else {
	if (TRUE == Adapter->IdleMode)
	{
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device is already in Idle mode....");
	return status ;
	}

	uiRegRead = 0;
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got Req from F/W to go in IDLE mode \n");

	if (Adapter->chip_id == BCS220_2 \|\|
	Adapter->chip_id == BCS220_2BC \|\|
	Adapter->chip_id == BCS250_BC \|\|
	Adapter->chip_id == BCS220_3) {

	bytes = rdmalt(Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
	if (bytes < 0) {
	status = bytes;
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "rdm failed while Reading HPM_CONFIG_LDO145 Reg 0\n");
	return status;
	}


	uiRegRead \|= (1<<17);

	status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
	if (status) {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
	return status;
	}

	}
	SendIdleModeResponse(Adapter);
	}
	} else if (ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
	OverrideServiceFlowParams(Adapter, puiBuffer);
	}
	return status;
	}

	static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int Pattern)
	{
	int status = STATUS_SUCCESS;
	unsigned int value;
	unsigned int chip_id ;
	unsigned long timeout = 0, itr = 0;

	int lenwritten = 0;
	unsigned char aucAbortPattern[8] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
	struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter;

	/* Abort Bus suspend if its already suspended */
	if ((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) {
	status = usb_autopm_get_interface(psInterfaceAdapter->interface);
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Bus got wakeup..Aborting Idle mode... status:%d \n", status);

	}

	if ((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
	\|\|
	(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)) {
	/* write the SW abort pattern. */
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
	status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
	if (status) {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
	return status;
	}
	}

	if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
	value = 0x80000000;
	status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
	if (status)
	{
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
	return status;
	}
	} else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
	/*
	* Get a Interrupt Out URB and send 8 Bytes Down
	* To be Done in Thread Context.
	* Not using Asynchronous Mechanism.
	*/
	status = usb_interrupt_msg (psInterfaceAdapter->udev,
	usb_sndintpipe(psInterfaceAdapter->udev,
	psInterfaceAdapter->sIntrOut.int_out_endpointAddr),
	aucAbortPattern,
	8,
	&lenwritten,
	5000);
	if (status) {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n", status);
	return status;
	} else {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "NOB Sent down :%d", lenwritten);
	}

	/* mdelay(25); */

	timeout = jiffies + msecs_to_jiffies(50) ;
	while ( timeout > jiffies ) {
	itr++ ;
	rdmalt(Adapter, CHIP_ID_REG, &chip_id, sizeof(UINT));
	if (0xbece3200 == (chip_id&~(0xF0)))
	chip_id = chip_id&~(0xF0);
	if (chip_id == Adapter->chip_id)
	break;
	}
	if (timeout < jiffies )
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Not able to read chip-id even after 25 msec");
	else
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Number of completed iteration to read chip-id :%lu", itr);

	status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
	if (status) {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
	return status;
	}
	}
	return status;
	}
	int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter)
	{
	ULONG Status = 0;
	if (Adapter->bTriedToWakeUpFromlowPowerMode) {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
	} else {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing Low Power Mode Abort pattern to the Device\n");
	Adapter->bTriedToWakeUpFromlowPowerMode = TRUE;
	InterfaceAbortIdlemode(Adapter, Adapter->usIdleModePattern);

	}
	return Status;
	}

	void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
	{
	unsigned int uiRegVal = 0;
	INT Status = 0;
	int bytes;

	if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
	/* clear idlemode interrupt. */
	uiRegVal = 0;
	Status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
	if (Status) {
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
	return;
	}
	}

	else {

	/* clear Interrupt EP registers. */
	bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegVal, sizeof(uiRegVal));
	if (bytes < 0) {
	Status = bytes;
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG0 failed with Err :%d", Status);
	return;
	}

	bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG1, &uiRegVal, sizeof(uiRegVal));
	if (bytes < 0) {
	Status = bytes;
	BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "RDM of DEVICE_INT_OUT_EP_REG1 failed with Err :%d", Status);
	return;
	}
	}
	}