blob: 289ee549146df7c7ae19e30399ac5fb8e442403e [file] [log] [blame]
#ifndef __WINBOND_WBHAL_S_H
#define __WINBOND_WBHAL_S_H
#include <linux/types.h>
#include <linux/if_ether.h> /* for ETH_ALEN */
#define HAL_LED_SET_MASK 0x001c
#define HAL_LED_SET_SHIFT 2
/* supported RF type */
#define RF_MAXIM_2825 0
#define RF_MAXIM_2827 1
#define RF_MAXIM_2828 2
#define RF_MAXIM_2829 3
#define RF_MAXIM_V1 15
#define RF_AIROHA_2230 16
#define RF_AIROHA_7230 17
#define RF_AIROHA_2230S 18
#define RF_WB_242 33
#define RF_WB_242_1 34
#define RF_DECIDE_BY_INF 255
/*
* ----------------------------------------------------------------
* The follow define connect to upper layer
* User must modify for connection between HAL and upper layer
* ----------------------------------------------------------------
*/
/*
* ==============================
* Common define
* ==============================
*/
/* Bit 5 */
#define HAL_USB_MODE_BURST(_H) (_H->SoftwareSet & 0x20)
/* Scan interval */
#define SCAN_MAX_CHNL_TIME (50)
/* For TxL2 Frame typr recognise */
#define FRAME_TYPE_802_3_DATA 0
#define FRAME_TYPE_802_11_MANAGEMENT 1
#define FRAME_TYPE_802_11_MANAGEMENT_CHALLENGE 2
#define FRAME_TYPE_802_11_CONTROL 3
#define FRAME_TYPE_802_11_DATA 4
#define FRAME_TYPE_PROMISCUOUS 5
/* The follow definition is used for convert the frame------------ */
#define DOT_11_SEQUENCE_OFFSET 22 /* Sequence control offset */
#define DOT_3_TYPE_OFFSET 12
#define DOT_11_MAC_HEADER_SIZE 24
#define DOT_11_SNAP_SIZE 6
#define DOT_11_TYPE_OFFSET 30 /* The start offset of 802.11 Frame. Type encapsulation. */
#define DEFAULT_SIFSTIME 10
#define DEFAULT_FRAGMENT_THRESHOLD 2346 /* No fragment */
#define DEFAULT_MSDU_LIFE_TIME 0xffff
#define LONG_PREAMBLE_PLUS_PLCPHEADER_TIME (144 + 48)
#define SHORT_PREAMBLE_PLUS_PLCPHEADER_TIME (72 + 24)
#define PREAMBLE_PLUS_SIGNAL_PLUS_SIGNALEXTENSION (16 + 4 + 6)
#define Tsym 4
/* Frame Type of Bits (2, 3)----------------------------------- */
#define MAC_TYPE_MANAGEMENT 0x00
#define MAC_TYPE_CONTROL 0x04
#define MAC_TYPE_DATA 0x08
#define MASK_FRAGMENT_NUMBER 0x000F
#define SEQUENCE_NUMBER_SHIFT 4
#define HAL_WOL_TYPE_WAKEUP_FRAME 0x01
#define HAL_WOL_TYPE_MAGIC_PACKET 0x02
#define HAL_KEYTYPE_WEP40 0
#define HAL_KEYTYPE_WEP104 1
#define HAL_KEYTYPE_TKIP 2 /* 128 bit key */
#define HAL_KEYTYPE_AES_CCMP 3 /* 128 bit key */
/* For VM state */
enum {
VM_STOP = 0,
VM_RUNNING,
VM_COMPLETED
};
/*
* ================================
* Normal Key table format
* ================================
*/
/* The order of KEY index is MAPPING_KEY_START_INDEX > GROUP_KEY_START_INDEX */
#define MAX_KEY_TABLE 24 /* 24 entry for storing key data */
#define GROUP_KEY_START_INDEX 4
#define MAPPING_KEY_START_INDEX 8
/*
* =========================================
* Descriptor
* =========================================
*/
#define MAX_DESCRIPTOR_BUFFER_INDEX 8 /* Have to multiple of 2 */
#define FLAG_ERROR_TX_MASK 0x000000bf
#define FLAG_ERROR_RX_MASK 0x0000083f
#define FLAG_BAND_RX_MASK 0x10000000 /* Bit 28 */
struct R00_descriptor {
union {
u32 value;
#ifdef _BIG_ENDIAN_
struct {
u32 R00_packet_or_buffer_status:1;
u32 R00_packet_in_fifo:1;
u32 R00_RESERVED:2;
u32 R00_receive_byte_count:12;
u32 R00_receive_time_index:16;
};
#else
struct {
u32 R00_receive_time_index:16;
u32 R00_receive_byte_count:12;
u32 R00_RESERVED:2;
u32 R00_packet_in_fifo:1;
u32 R00_packet_or_buffer_status:1;
};
#endif
};
};
struct T00_descriptor {
union {
u32 value;
#ifdef _BIG_ENDIAN_
struct {
u32 T00_first_mpdu:1; /* for hardware use */
u32 T00_last_mpdu:1; /* for hardware use */
u32 T00_IsLastMpdu:1;/* 0:not 1:Yes for software used */
u32 T00_IgnoreResult:1;/* The same mechanism with T00 setting. */
u32 T00_RESERVED_ID:2;/* 3 bit ID reserved */
u32 T00_tx_packet_id:4;
u32 T00_RESERVED:4;
u32 T00_header_length:6;
u32 T00_frame_length:12;
};
#else
struct {
u32 T00_frame_length:12;
u32 T00_header_length:6;
u32 T00_RESERVED:4;
u32 T00_tx_packet_id:4;
u32 T00_RESERVED_ID:2; /* 3 bit ID reserved */
u32 T00_IgnoreResult:1; /* The same mechanism with T00 setting. */
u32 T00_IsLastMpdu:1; /* 0:not 1:Yes for software used */
u32 T00_last_mpdu:1; /* for hardware use */
u32 T00_first_mpdu:1; /* for hardware use */
};
#endif
};
};
struct R01_descriptor {
union {
u32 value;
#ifdef _BIG_ENDIAN_
struct {
u32 R01_RESERVED:3;
u32 R01_mod_type:1;
u32 R01_pre_type:1;
u32 R01_data_rate:3;
u32 R01_AGC_state:8;
u32 R01_LNA_state:2;
u32 R01_decryption_method:2;
u32 R01_mic_error:1;
u32 R01_replay:1;
u32 R01_broadcast_frame:1;
u32 R01_multicast_frame:1;
u32 R01_directed_frame:1;
u32 R01_receive_frame_antenna_selection:1;
u32 R01_frame_receive_during_atim_window:1;
u32 R01_protocol_version_error:1;
u32 R01_authentication_frame_icv_error:1;
u32 R01_null_key_to_authentication_frame:1;
u32 R01_icv_error:1;
u32 R01_crc_error:1;
};
#else
struct {
u32 R01_crc_error:1;
u32 R01_icv_error:1;
u32 R01_null_key_to_authentication_frame:1;
u32 R01_authentication_frame_icv_error:1;
u32 R01_protocol_version_error:1;
u32 R01_frame_receive_during_atim_window:1;
u32 R01_receive_frame_antenna_selection:1;
u32 R01_directed_frame:1;
u32 R01_multicast_frame:1;
u32 R01_broadcast_frame:1;
u32 R01_replay:1;
u32 R01_mic_error:1;
u32 R01_decryption_method:2;
u32 R01_LNA_state:2;
u32 R01_AGC_state:8;
u32 R01_data_rate:3;
u32 R01_pre_type:1;
u32 R01_mod_type:1;
u32 R01_RESERVED:3;
};
#endif
};
};
struct T01_descriptor {
union {
u32 value;
#ifdef _BIG_ENDIAN_
struct {
u32 T01_rts_cts_duration:16;
u32 T01_fall_back_rate:3;
u32 T01_add_rts:1;
u32 T01_add_cts:1;
u32 T01_modulation_type:1;
u32 T01_plcp_header_length:1;
u32 T01_transmit_rate:3;
u32 T01_wep_id:2;
u32 T01_add_challenge_text:1;
u32 T01_inhibit_crc:1;
u32 T01_loop_back_wep_mode:1;
u32 T01_retry_abort_enable:1;
};
#else
struct {
u32 T01_retry_abort_enable:1;
u32 T01_loop_back_wep_mode:1;
u32 T01_inhibit_crc:1;
u32 T01_add_challenge_text:1;
u32 T01_wep_id:2;
u32 T01_transmit_rate:3;
u32 T01_plcp_header_length:1;
u32 T01_modulation_type:1;
u32 T01_add_cts:1;
u32 T01_add_rts:1;
u32 T01_fall_back_rate:3;
u32 T01_rts_cts_duration:16;
};
#endif
};
};
struct T02_descriptor {
union {
u32 value;
#ifdef _BIG_ENDIAN_
struct {
u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
u32 T02_Tx_PktID:4;
u32 T02_MPDU_Cnt:4;
u32 T02_RTS_Cnt:4;
u32 T02_RESERVED:7;
u32 T02_transmit_complete:1;
u32 T02_transmit_abort_due_to_TBTT:1;
u32 T02_effective_transmission_rate:1;
u32 T02_transmit_without_encryption_due_to_wep_on_false:1;
u32 T02_discard_due_to_null_wep_key:1;
u32 T02_RESERVED_1:1;
u32 T02_out_of_MaxTxMSDULiftTime:1;
u32 T02_transmit_abort:1;
u32 T02_transmit_fail:1;
};
#else
struct {
u32 T02_transmit_fail:1;
u32 T02_transmit_abort:1;
u32 T02_out_of_MaxTxMSDULiftTime:1;
u32 T02_RESERVED_1:1;
u32 T02_discard_due_to_null_wep_key:1;
u32 T02_transmit_without_encryption_due_to_wep_on_false:1;
u32 T02_effective_transmission_rate:1;
u32 T02_transmit_abort_due_to_TBTT:1;
u32 T02_transmit_complete:1;
u32 T02_RESERVED:7;
u32 T02_RTS_Cnt:4;
u32 T02_MPDU_Cnt:4;
u32 T02_Tx_PktID:4;
u32 T02_RESERVED_ID:2; /* The same mechanism with T00 setting */
u32 T02_IgnoreResult:1; /* The same mechanism with T00 setting. */
u32 T02_IsLastMpdu:1; /* The same mechanism with T00 setting */
};
#endif
};
};
struct wb35_descriptor { /* Skip length = 8 DWORD */
/* ID for descriptor ---, The field doesn't be cleard in the operation of Descriptor definition */
u8 Descriptor_ID;
/* ----------------------The above region doesn't be cleared by DESCRIPTOR_RESET------ */
u8 RESERVED[3];
u16 FragmentThreshold;
u8 InternalUsed; /* Only can be used by operation of descriptor definition */
u8 Type; /* 0: 802.3 1:802.11 data frame 2:802.11 management frame */
u8 PreambleMode;/* 0: short 1:long */
u8 TxRate;
u8 FragmentCount;
u8 EapFix; /* For speed up key install */
/* For R00 and T00 ------------------------------ */
union {
struct R00_descriptor R00;
struct T00_descriptor T00;
};
/* For R01 and T01 ------------------------------ */
union {
struct R01_descriptor R01;
struct T01_descriptor T01;
};
/* For R02 and T02 ------------------------------ */
union {
u32 R02;
struct T02_descriptor T02;
};
/* For R03 and T03 ------------------------------ */
/* For software used */
union {
u32 R03;
u32 T03;
struct {
u8 buffer_number;
u8 buffer_start_index;
u16 buffer_total_size;
};
};
/* For storing the buffer */
u16 buffer_size[MAX_DESCRIPTOR_BUFFER_INDEX];
void *buffer_address[MAX_DESCRIPTOR_BUFFER_INDEX];
};
#define MAX_TXVGA_EEPROM 9 /* How many word(u16) of EEPROM will be used for TxVGA */
#define MAX_RF_PARAMETER 32
struct txvga_for_50 {
u8 ChanNo;
u8 TxVgaValue;
};
/*
* ==============================================
* Device related include
* ==============================================
*/
#include "wb35reg_s.h"
#include "wb35tx_s.h"
#include "wb35rx_s.h"
/* For Hal using ============================================ */
struct hw_data {
/* For compatible with 33 */
u32 revision;
u32 BB3c_cal; /* The value for Tx calibration comes from EEPROM */
u32 BB54_cal; /* The value for Rx calibration comes from EEPROM */
/* For surprise remove */
u32 SurpriseRemove; /* 0: Normal 1: Surprise remove */
u8 IsKeyPreSet;
u8 CalOneTime;
u8 VCO_trim;
u32 FragCount;
u32 DMAFix; /* V1_DMA_FIX The variable can be removed if driver want to save mem space for V2. */
/*
* ===============================================
* Definition for MAC address
* ===============================================
*/
u8 PermanentMacAddress[ETH_ALEN + 2]; /* The Ethernet addr that are stored in EEPROM. + 2 to 8-byte alignment */
u8 CurrentMacAddress[ETH_ALEN + 2]; /* The Enthernet addr that are in used. + 2 to 8-byte alignment */
/*
* =========================================
* Definition for 802.11
* =========================================
*/
u8 *bssid_pointer; /* Used by hal_get_bssid for return value */
u8 bssid[8]; /* Only 6 byte will be used. 8 byte is required for read buffer */
u8 ssid[32]; /* maximum ssid length is 32 byte */
u16 AID;
u8 ssid_length;
u8 Channel;
u16 ListenInterval;
u16 CapabilityInformation;
u16 BeaconPeriod;
u16 ProbeDelay;
u8 bss_type;/* 0: IBSS_NET or 1:ESS_NET */
u8 preamble;/* 0: short preamble, 1: long preamble */
u8 slot_time_select; /* 9 or 20 value */
u8 phy_type; /* Phy select */
u32 phy_para[MAX_RF_PARAMETER];
u32 phy_number;
u32 CurrentRadioSw; /* 0:On 1:Off */
u32 CurrentRadioHw; /* 0:On 1:Off */
u8 *power_save_point; /* Used by hal_get_power_save_mode for return value */
u8 cwmin;
u8 desired_power_save;
u8 dtim; /* Is running dtim */
u8 mapping_key_replace_index; /* In Key table, the next index be replaced */
u16 MaxReceiveLifeTime;
u16 FragmentThreshold;
u16 FragmentThreshold_tmp;
u16 cwmax;
u8 Key_slot[MAX_KEY_TABLE][8]; /* Ownership record for key slot. For Alignment */
u32 Key_content[MAX_KEY_TABLE][12]; /* 10DW for each entry + 2 for burst command (Off and On valid bit) */
u8 CurrentDefaultKeyIndex;
u32 CurrentDefaultKeyLength;
/*
* ==================================================
* Variable for each module
* ==================================================
*/
struct usb_device *udev;
struct wb35_reg reg; /* Need Wb35Reg.h */
struct wb35_tx Wb35Tx; /* Need Wb35Tx.h */
struct wb35_rx Wb35Rx; /* Need Wb35Rx.h */
struct timer_list LEDTimer; /* For LED */
u32 LEDpoint; /* For LED */
u32 dto_tx_retry_count;
u32 dto_tx_frag_count;
u32 rx_ok_count[13]; /* index=0: total rx ok */
u32 rx_err_count[13]; /* index=0: total rx err */
/* for Tx debug */
u32 tx_TBTT_start_count;
u32 tx_ETR_count;
u32 tx_WepOn_false_count;
u32 tx_Null_key_count;
u32 tx_retry_count[8];
u8 PowerIndexFromEEPROM; /* For 2412MHz */
u8 power_index;
u8 IsWaitJoinComplete; /* TRUE: set join request */
u8 band;
u16 SoftwareSet;
u16 Reserved_s;
u32 IsInitOK; /* 0: Driver starting 1: Driver init OK */
/* For Phy calibration */
s32 iq_rsdl_gain_tx_d2;
s32 iq_rsdl_phase_tx_d2;
u32 txvga_setting_for_cal;
u8 TxVgaSettingInEEPROM[(((MAX_TXVGA_EEPROM * 2) + 3) & ~0x03)]; /* For EEPROM value */
u8 TxVgaFor24[16]; /* Max is 14, 2 for alignment */
struct txvga_for_50 TxVgaFor50[36]; /* 35 channels in 5G. 35x2 = 70 byte. 2 for alignments */
u16 Scan_Interval;
u16 RESERVED6;
/* LED control */
u32 LED_control;
/*
* LED_control 4 byte: Gray_Led_1[3] Gray_Led_0[2] Led[1] Led[0]
* Gray_Led
* For Led gray setting
* Led
* 0: normal control,
* LED behavior will decide by EEPROM setting
* 1: Turn off specific LED
* 2: Always on specific LED
* 3: slow blinking specific LED
* 4: fast blinking specific LED
* 5: WPS led control is set. Led0 is Red, Led1 id Green
*
* Led[1] is parameter for WPS LED mode
* 1:InProgress
* 2: Error
* 3: Session overlap
* 4: Success control
*/
u32 LED_LinkOn; /* Turn LED on control */
u32 LED_Scanning; /* Let LED in scan process control */
u32 LED_Blinking; /* Temp variable for shining */
u32 RxByteCountLast;
u32 TxByteCountLast;
/* For global timer */
u32 time_count; /* TICK_TIME_100ms 1 = 100ms */
};
#endif