Documentation/vm/transhuge.rst

.. _transhuge:

============================
Transparent Hugepage Support
============================

This document describes design principles Transparent Hugepage (THP)
Support and its interaction with other parts of the memory management.

Design principles
=================

- "graceful fallback": mm components which don't have transparent hugepage
  knowledge fall back to breaking huge pmd mapping into table of ptes and,
  if necessary, split a transparent hugepage. Therefore these components
  can continue working on the regular pages or regular pte mappings.

- if a hugepage allocation fails because of memory fragmentation,
  regular pages should be gracefully allocated instead and mixed in
  the same vma without any failure or significant delay and without
  userland noticing

- if some task quits and more hugepages become available (either
  immediately in the buddy or through the VM), guest physical memory
  backed by regular pages should be relocated on hugepages
  automatically (with khugepaged)

- it doesn't require memory reservation and in turn it uses hugepages
  whenever possible (the only possible reservation here is kernelcore=
  to avoid unmovable pages to fragment all the memory but such a tweak
  is not specific to transparent hugepage support and it's a generic
  feature that applies to all dynamic high order allocations in the
  kernel)

get_user_pages and follow_page
==============================

get_user_pages and follow_page if run on a hugepage, will return the
head or tail pages as usual (exactly as they would do on
hugetlbfs). Most gup users will only care about the actual physical
address of the page and its temporary pinning to release after the I/O
is complete, so they won't ever notice the fact the page is huge. But
if any driver is going to mangle over the page structure of the tail
page (like for checking page->mapping or other bits that are relevant
for the head page and not the tail page), it should be updated to jump
to check head page instead. Taking reference on any head/tail page would
prevent page from being split by anyone.

.. note::
   these aren't new constraints to the GUP API, and they match the
   same constrains that applies to hugetlbfs too, so any driver capable
   of handling GUP on hugetlbfs will also work fine on transparent
   hugepage backed mappings.

In case you can't handle compound pages if they're returned by
follow_page, the FOLL_SPLIT bit can be specified as parameter to
follow_page, so that it will split the hugepages before returning
them. Migration for example passes FOLL_SPLIT as parameter to
follow_page because it's not hugepage aware and in fact it can't work
at all on hugetlbfs (but it instead works fine on transparent
hugepages thanks to FOLL_SPLIT). migration simply can't deal with
hugepages being returned (as it's not only checking the pfn of the
page and pinning it during the copy but it pretends to migrate the
memory in regular page sizes and with regular pte/pmd mappings).

Graceful fallback
=================

Code walking pagetables but unaware about huge pmds can simply call
split_huge_pmd(vma, pmd, addr) where the pmd is the one returned by
pmd_offset. It's trivial to make the code transparent hugepage aware
by just grepping for "pmd_offset" and adding split_huge_pmd where
missing after pmd_offset returns the pmd. Thanks to the graceful
fallback design, with a one liner change, you can avoid to write
hundred if not thousand of lines of complex code to make your code
hugepage aware.

If you're not walking pagetables but you run into a physical hugepage
but you can't handle it natively in your code, you can split it by
calling split_huge_page(page). This is what the Linux VM does before
it tries to swapout the hugepage for example. split_huge_page() can fail
if the page is pinned and you must handle this correctly.

Example to make mremap.c transparent hugepage aware with a one liner
change::

	diff --git a/mm/mremap.c b/mm/mremap.c
	--- a/mm/mremap.c
	+++ b/mm/mremap.c
	@@ -41,6 +41,7 @@ static pmd_t *get_old_pmd(struct mm_stru
			return NULL;

		pmd = pmd_offset(pud, addr);
	+	split_huge_pmd(vma, pmd, addr);
		if (pmd_none_or_clear_bad(pmd))
			return NULL;

Locking in hugepage aware code
==============================

We want as much code as possible hugepage aware, as calling
split_huge_page() or split_huge_pmd() has a cost.

To make pagetable walks huge pmd aware, all you need to do is to call
pmd_trans_huge() on the pmd returned by pmd_offset. You must hold the
mmap_sem in read (or write) mode to be sure an huge pmd cannot be
created from under you by khugepaged (khugepaged collapse_huge_page
takes the mmap_sem in write mode in addition to the anon_vma lock). If
pmd_trans_huge returns false, you just fallback in the old code
paths. If instead pmd_trans_huge returns true, you have to take the
page table lock (pmd_lock()) and re-run pmd_trans_huge. Taking the
page table lock will prevent the huge pmd to be converted into a
regular pmd from under you (split_huge_pmd can run in parallel to the
pagetable walk). If the second pmd_trans_huge returns false, you
should just drop the page table lock and fallback to the old code as
before. Otherwise you can proceed to process the huge pmd and the
hugepage natively. Once finished you can drop the page table lock.

Refcounts and transparent huge pages
====================================

Refcounting on THP is mostly consistent with refcounting on other compound
pages:

  - get_page()/put_page() and GUP operate in head page's ->_refcount.

  - ->_refcount in tail pages is always zero: get_page_unless_zero() never
    succeed on tail pages.

  - map/unmap of the pages with PTE entry increment/decrement ->_mapcount
    on relevant sub-page of the compound page.

  - map/unmap of the whole compound page accounted in compound_mapcount
    (stored in first tail page). For file huge pages, we also increment
    ->_mapcount of all sub-pages in order to have race-free detection of
    last unmap of subpages.

PageDoubleMap() indicates that the page is *possibly* mapped with PTEs.

For anonymous pages PageDoubleMap() also indicates ->_mapcount in all
subpages is offset up by one. This additional reference is required to
get race-free detection of unmap of subpages when we have them mapped with
both PMDs and PTEs.

This is optimization required to lower overhead of per-subpage mapcount
tracking. The alternative is alter ->_mapcount in all subpages on each
map/unmap of the whole compound page.

For anonymous pages, we set PG_double_map when a PMD of the page got split
for the first time, but still have PMD mapping. The additional references
go away with last compound_mapcount.

File pages get PG_double_map set on first map of the page with PTE and
goes away when the page gets evicted from page cache.

split_huge_page internally has to distribute the refcounts in the head
page to the tail pages before clearing all PG_head/tail bits from the page
structures. It can be done easily for refcounts taken by page table
entries. But we don't have enough information on how to distribute any
additional pins (i.e. from get_user_pages). split_huge_page() fails any
requests to split pinned huge page: it expects page count to be equal to
sum of mapcount of all sub-pages plus one (split_huge_page caller must
have reference for head page).

split_huge_page uses migration entries to stabilize page->_refcount and
page->_mapcount of anonymous pages. File pages just got unmapped.

We safe against physical memory scanners too: the only legitimate way
scanner can get reference to a page is get_page_unless_zero().

All tail pages have zero ->_refcount until atomic_add(). This prevents the
scanner from getting a reference to the tail page up to that point. After the
atomic_add() we don't care about the ->_refcount value. We already known how
many references should be uncharged from the head page.

For head page get_page_unless_zero() will succeed and we don't mind. It's
clear where reference should go after split: it will stay on head page.

Note that split_huge_pmd() doesn't have any limitation on refcounting:
pmd can be split at any point and never fails.

Partial unmap and deferred_split_huge_page()
============================================

Unmapping part of THP (with munmap() or other way) is not going to free
memory immediately. Instead, we detect that a subpage of THP is not in use
in page_remove_rmap() and queue the THP for splitting if memory pressure
comes. Splitting will free up unused subpages.

Splitting the page right away is not an option due to locking context in
the place where we can detect partial unmap. It's also might be
counterproductive since in many cases partial unmap happens during exit(2) if
a THP crosses a VMA boundary.

Function deferred_split_huge_page() is used to queue page for splitting.
The splitting itself will happen when we get memory pressure via shrinker
interface.