blob: 85348a09d655afc220fc55f71810b07830ea8936 [file] [log] [blame]
menu "Kernel hacking"
source "lib/Kconfig.debug"
config STRICT_DEVMEM
bool "Filter access to /dev/mem"
depends on MMU
---help---
If this option is disabled, you allow userspace (root) access to all
of memory, including kernel and userspace memory. Accidental
access to this is obviously disastrous, but specific access can
be used by people debugging the kernel.
If this option is switched on, the /dev/mem file only allows
userspace access to memory mapped peripherals.
If in doubt, say Y.
# RMK wants arm kernels compiled with frame pointers or stack unwinding.
# If you know what you are doing and are willing to live without stack
# traces, you can get a slightly smaller kernel by setting this option to
# n, but then RMK will have to kill you ;).
config FRAME_POINTER
bool
depends on !THUMB2_KERNEL
default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
help
If you say N here, the resulting kernel will be slightly smaller and
faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
when a problem occurs with the kernel, the information that is
reported is severely limited.
config ARM_UNWIND
bool "Enable stack unwinding support (EXPERIMENTAL)"
depends on AEABI && EXPERIMENTAL
default y
help
This option enables stack unwinding support in the kernel
using the information automatically generated by the
compiler. The resulting kernel image is slightly bigger but
the performance is not affected. Currently, this feature
only works with EABI compilers. If unsure say Y.
config OLD_MCOUNT
bool
depends on FUNCTION_TRACER && FRAME_POINTER
default y
config DEBUG_USER
bool "Verbose user fault messages"
help
When a user program crashes due to an exception, the kernel can
print a brief message explaining what the problem was. This is
sometimes helpful for debugging but serves no purpose on a
production system. Most people should say N here.
In addition, you need to pass user_debug=N on the kernel command
line to enable this feature. N consists of the sum of:
1 - undefined instruction events
2 - system calls
4 - invalid data aborts
8 - SIGSEGV faults
16 - SIGBUS faults
# These options are only for real kernel hackers who want to get their hands dirty.
config DEBUG_LL
bool "Kernel low-level debugging functions (read help!)"
depends on DEBUG_KERNEL
help
Say Y here to include definitions of printascii, printch, printhex
in the kernel. This is helpful if you are debugging code that
executes before the console is initialized.
Note that selecting this option will limit the kernel to a single
UART definition, as specified below. Attempting to boot the kernel
image on a different platform *will not work*, so this option should
not be enabled for kernels that are intended to be portable.
choice
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
config AT91_DEBUG_LL_DBGU1
bool "Kernel low-level debugging on 9263 and 9g45"
depends on HAVE_AT91_DBGU1
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on these devices.
config DEBUG_CLPS711X_UART2
bool "Kernel low-level debugging messages via UART2"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
help
Say Y here if you want the debug print routines to direct
their output to the UART on Highbank based devices.
config DEBUG_IMX1_UART
bool "i.MX1 Debug UART"
depends on SOC_IMX1
help
Say Y here if you want kernel low-level debugging support
on i.MX1.
config DEBUG_IMX23_UART
bool "i.MX23 Debug UART"
depends on SOC_IMX23
help
Say Y here if you want kernel low-level debugging support
on i.MX23.
config DEBUG_IMX25_UART
bool "i.MX25 Debug UART"
depends on SOC_IMX25
help
Say Y here if you want kernel low-level debugging support
on i.MX25.
config DEBUG_IMX21_IMX27_UART
bool "i.MX21 and i.MX27 Debug UART"
depends on SOC_IMX21 || SOC_IMX27
help
Say Y here if you want kernel low-level debugging support
on i.MX21 or i.MX27.
config DEBUG_IMX28_UART
bool "i.MX28 Debug UART"
depends on SOC_IMX28
help
Say Y here if you want kernel low-level debugging support
on i.MX28.
config DEBUG_IMX31_IMX35_UART
bool "i.MX31 and i.MX35 Debug UART"
depends on SOC_IMX31 || SOC_IMX35
help
Say Y here if you want kernel low-level debugging support
on i.MX31 or i.MX35.
config DEBUG_IMX51_UART
bool "i.MX51 Debug UART"
depends on SOC_IMX51
help
Say Y here if you want kernel low-level debugging support
on i.MX51.
config DEBUG_IMX50_IMX53_UART
bool "i.MX50 and i.MX53 Debug UART"
depends on SOC_IMX50 || SOC_IMX53
help
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
config DEBUG_IMX6Q_UART4
bool "i.MX6Q Debug UART4"
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
on i.MX6Q UART4.
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on MSM devices.
config DEBUG_MSM_UART2
bool "Kernel low-level debugging messages via MSM UART2"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on MSM devices.
config DEBUG_MSM_UART3
bool "Kernel low-level debugging messages via MSM UART3"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the third serial port on MSM devices.
config DEBUG_MSM8660_UART
bool "Kernel low-level debugging messages via MSM 8660 UART"
depends on ARCH_MSM8X60
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8660 devices.
config DEBUG_MSM8960_UART
bool "Kernel low-level debugging messages via MSM 8960 UART"
depends on ARCH_MSM8960
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
depends on ARCH_REALVIEW
help
Say Y here if you want the debug print routines to direct
their output to the serial port on RealView EB, PB11MP, PBA8
and PBX platforms.
config DEBUG_REALVIEW_PB1176_PORT
bool "RealView PB1176 UART"
depends on MACH_REALVIEW_PB1176
help
Say Y here if you want the debug print routines to direct
their output to the standard serial port on the RealView
PB1176 platform.
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
bool "Use S3C UART 0 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 0. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
bool "Use S3C UART 1 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 1. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
bool "Use S3C UART 2 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 2. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
help
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
definition internally in order for low-level debugging to
work.
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
help
Say Y here if you want the debug print routines to direct
their output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
channel and on the XScale with the PEEDI.
Note that the system will appear to hang during boot if there
is nothing connected to read from the DCC.
config DEBUG_SEMIHOSTING
bool "Kernel low-level debug output via semihosting I"
help
Semihosting enables code running on an ARM target to use
the I/O facilities on a host debugger/emulator through a
simple SVC calls. The host debugger or emulator must have
semihosting enabled for the special svc call to be trapped
otherwise the kernel will crash.
This is known to work with OpenOCD, as wellas
ARM's Fast Models, or any other controlling environment
that implements semihosting.
For more details about semihosting, please see
chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
endchoice
config EARLY_PRINTK
bool "Early printk"
depends on DEBUG_LL
help
Say Y here if you want to have an early console using the
kernel low-level debugging functions. Add earlyprintk to your
kernel parameters to enable this console.
config OC_ETM
bool "On-chip ETM and ETB"
depends on ARM_AMBA
help
Enables the on-chip embedded trace macrocell and embedded trace
buffer driver that will allow you to collect traces of the
kernel code.
config ARM_KPROBES_TEST
tristate "Kprobes test module"
depends on KPROBES && MODULES
help
Perform tests of kprobes API and instruction set simulation.
endmenu