diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
index 12c981e..9a0599f 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
@@ -1,6 +1,6 @@
 / {
 	aliases {
-		ethernet = &ethernet;
+		ethernet0 = &ethernet;
 	};
 };
 
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
index 3f0a56e..dc7ae77 100644
--- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
@@ -1,6 +1,6 @@
 / {
 	aliases {
-		ethernet = &ethernet;
+		ethernet0 = &ethernet;
 	};
 };
 
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 35cea3f..561f27d 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -198,8 +198,8 @@
 				brcm,pins = <0 1>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
-			i2c0_gpio32: i2c0_gpio32 {
-				brcm,pins = <32 34>;
+			i2c0_gpio28: i2c0_gpio28 {
+				brcm,pins = <28 29>;
 				brcm,function = <BCM2835_FSEL_ALT0>;
 			};
 			i2c0_gpio44: i2c0_gpio44 {
@@ -295,20 +295,28 @@
 			/* Separate from the uart0_gpio14 group
 			 * because it conflicts with spi1_gpio16, and
 			 * people often run uart0 on the two pins
-			 * without flow contrl.
+			 * without flow control.
 			 */
 			uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
 				brcm,pins = <16 17>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			uart0_gpio30: uart0_gpio30 {
+			uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
-			uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 {
+			uart0_gpio32: uart0_gpio32 {
 				brcm,pins = <32 33>;
 				brcm,function = <BCM2835_FSEL_ALT3>;
 			};
+			uart0_gpio36: uart0_gpio36 {
+				brcm,pins = <36 37>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
+				brcm,pins = <38 39>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
 
 			uart1_gpio14: uart1_gpio14 {
 				brcm,pins = <14 15>;
@@ -326,10 +334,6 @@
 				brcm,pins = <30 31>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
 			};
-			uart1_gpio36: uart1_gpio36 {
-				brcm,pins = <36 37 38 39>;
-				brcm,function = <BCM2835_FSEL_ALT2>;
-			};
 			uart1_gpio40: uart1_gpio40 {
 				brcm,pins = <40 41>;
 				brcm,function = <BCM2835_FSEL_ALT5>;
diff --git a/arch/arm/boot/dts/include/arm b/arch/arm/boot/dts/include/arm
deleted file mode 120000
index a96aa0e..0000000
--- a/arch/arm/boot/dts/include/arm
+++ /dev/null
@@ -1 +0,0 @@
-..
\ No newline at end of file
diff --git a/arch/arm/boot/dts/include/arm64 b/arch/arm/boot/dts/include/arm64
deleted file mode 120000
index 074a835..0000000
--- a/arch/arm/boot/dts/include/arm64
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm64/boot/dts
\ No newline at end of file
diff --git a/arch/arm/boot/dts/include/dt-bindings b/arch/arm/boot/dts/include/dt-bindings
deleted file mode 120000
index 08c00e4..0000000
--- a/arch/arm/boot/dts/include/dt-bindings
+++ /dev/null
@@ -1 +0,0 @@
-../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 402579a..3a9e9b6 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -72,6 +72,8 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <13000000>;
+		arm,cpu-registers-not-fw-configured;
 	};
 
 	watchdog: watchdog@10007000 {
diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig
new file mode 100644
index 0000000..d2d75fa
--- /dev/null
+++ b/arch/arm/configs/gemini_defconfig
@@ -0,0 +1,68 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_USER_NS=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_MULTI_V4=y
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_GEMINI=y
+CONFIG_PCI=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_CMDLINE="console=ttyS0,115200n8"
+CONFIG_KEXEC=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_GEMINI_WATCHDOG=y
+CONFIG_USB=y
+CONFIG_USB_MON=y
+CONFIG_USB_FOTG210_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_GEMINI=y
+CONFIG_DMADEVICES=y
+# CONFIG_DNOTIFY is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_ROMFS_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 3089d3bf..8cc6338 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -266,11 +266,12 @@
 extern const struct smp_operations omap4_smp_ops;
 #endif
 
+extern u32 omap4_get_cpu1_ns_pa_addr(void);
+
 #if defined(CONFIG_SMP) && defined(CONFIG_PM)
 extern int omap4_mpuss_init(void);
 extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state);
 extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state);
-extern u32 omap4_get_cpu1_ns_pa_addr(void);
 #else
 static inline int omap4_enter_lowpower(unsigned int cpu,
 					unsigned int power_state)
diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
index 03ec6d3..4cfc4f9 100644
--- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c
+++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c
@@ -213,11 +213,6 @@
 {}
 #endif
 
-u32 omap4_get_cpu1_ns_pa_addr(void)
-{
-	return old_cpu1_ns_pa_addr;
-}
-
 /**
  * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function
  * The purpose of this function is to manage low power programming
@@ -457,6 +452,11 @@
 
 #endif
 
+u32 omap4_get_cpu1_ns_pa_addr(void)
+{
+	return old_cpu1_ns_pa_addr;
+}
+
 /*
  * For kexec, we must set CPU1_WAKEUP_NS_PA_ADDR to point to
  * current kernel's secondary_startup() early before
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 3faf454..33e4953 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -306,7 +306,6 @@
 
 	cpu1_startup_pa = readl_relaxed(cfg.wakeupgen_base +
 					OMAP_AUX_CORE_BOOT_1);
-	cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr();
 
 	/* Did the configured secondary_startup() get overwritten? */
 	if (!omap4_smp_cpu1_startup_valid(cpu1_startup_pa))
@@ -316,9 +315,13 @@
 	 * If omap4 or 5 has NS_PA_ADDR configured, CPU1 may be in a
 	 * deeper idle state in WFI and will wake to an invalid address.
 	 */
-	if ((soc_is_omap44xx() || soc_is_omap54xx()) &&
-	    !omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr))
-		needs_reset = true;
+	if ((soc_is_omap44xx() || soc_is_omap54xx())) {
+		cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr();
+		if (!omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr))
+			needs_reset = true;
+	} else {
+		cpu1_ns_pa_addr = 0;
+	}
 
 	if (!needs_reset || !c->cpu1_rstctrl_va)
 		return;
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 4afcffc..73272f4 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -106,8 +106,13 @@
 	select ARMADA_AP806_SYSCON
 	select ARMADA_CP110_SYSCON
 	select ARMADA_37XX_CLK
+	select GPIOLIB
+	select GPIOLIB_IRQCHIP
 	select MVEBU_ODMI
 	select MVEBU_PIC
+	select OF_GPIO
+	select PINCTRL
+	select PINCTRL_ARMADA_37XX
 	help
 	  This enables support for Marvell EBU familly, including:
 	   - Armada 3700 SoC Family
diff --git a/arch/arm64/boot/dts/include/arm b/arch/arm64/boot/dts/include/arm
deleted file mode 120000
index cf63d80..0000000
--- a/arch/arm64/boot/dts/include/arm
+++ /dev/null
@@ -1 +0,0 @@
-../../../../arm/boot/dts
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/include/arm64 b/arch/arm64/boot/dts/include/arm64
deleted file mode 120000
index a96aa0e..0000000
--- a/arch/arm64/boot/dts/include/arm64
+++ /dev/null
@@ -1 +0,0 @@
-..
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/include/dt-bindings b/arch/arm64/boot/dts/include/dt-bindings
deleted file mode 120000
index 08c00e4..0000000
--- a/arch/arm64/boot/dts/include/dt-bindings
+++ /dev/null
@@ -1 +0,0 @@
-../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index cef5f97..a89855f 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -79,6 +79,8 @@
 };
 
 &i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
 
 	gpio_exp: pca9555@22 {
@@ -113,6 +115,8 @@
 
 &spi0 {
 	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi_quad_pins>;
 
 	m25p80@0 {
 		compatible = "jedec,spi-nor";
@@ -143,6 +147,8 @@
 
 /* Exported on the micro USB connector CON32 through an FTDI */
 &uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 	status = "okay";
 };
 
@@ -184,6 +190,8 @@
 };
 
 &eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
 	phy-mode = "rgmii-id";
 	phy = <&phy0>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 58ae9e0..4d495ec 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -161,16 +161,83 @@
 				#clock-cells = <1>;
 			};
 
-			gpio1: gpio@13800 {
-				compatible = "marvell,mvebu-gpio-3700",
+			pinctrl_nb: pinctrl@13800 {
+				compatible = "marvell,armada3710-nb-pinctrl",
 				"syscon", "simple-mfd";
-				reg = <0x13800 0x500>;
+				reg = <0x13800 0x100>, <0x13C00 0x20>;
+				gpionb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_nb 0 0 36>;
+					gpio-controller;
+					interrupts =
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+
+				};
 
 				xtalclk: xtal-clk {
 					compatible = "marvell,armada-3700-xtal-clock";
 					clock-output-names = "xtal";
 					#clock-cells = <0>;
 				};
+
+				spi_quad_pins: spi-quad-pins {
+					groups = "spi_quad";
+					function = "spi";
+				};
+
+				i2c1_pins: i2c1-pins {
+					groups = "i2c1";
+					function = "i2c";
+				};
+
+				i2c2_pins: i2c2-pins {
+					groups = "i2c2";
+					function = "i2c";
+				};
+
+				uart1_pins: uart1-pins {
+					groups = "uart1";
+					function = "uart";
+				};
+
+				uart2_pins: uart2-pins {
+					groups = "uart2";
+					function = "uart";
+				};
+			};
+
+			pinctrl_sb: pinctrl@18800 {
+				compatible = "marvell,armada3710-sb-pinctrl",
+				"syscon", "simple-mfd";
+				reg = <0x18800 0x100>, <0x18C00 0x20>;
+				gpiosb: gpio {
+					#gpio-cells = <2>;
+					gpio-ranges = <&pinctrl_sb 0 0 29>;
+					gpio-controller;
+					interrupts =
+					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				rgmii_pins: mii-pins {
+					groups = "rgmii";
+					function = "mii";
+				};
+
 			};
 
 			eth0: ethernet@30000 {
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 0ecaad4..1c3634f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -134,6 +134,9 @@
 	bus-width = <8>;
 	max-frequency = <50000000>;
 	cap-mmc-highspeed;
+	mediatek,hs200-cmd-int-delay=<26>;
+	mediatek,hs400-cmd-int-delay=<14>;
+	mediatek,hs400-cmd-resp-sel-rising;
 	vmmc-supply = <&mt6397_vemc_3v3_reg>;
 	vqmmc-supply = <&mt6397_vio18_reg>;
 	non-removable;
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index ce07285..65cdd87 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -30,7 +30,6 @@
 CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
@@ -62,16 +61,15 @@
 CONFIG_ARCH_ZX=y
 CONFIG_ARCH_ZYNQMP=y
 CONFIG_PCI=y
-CONFIG_PCI_MSI=y
 CONFIG_PCI_IOV=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PCIE_RCAR=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_XGENE=y
 CONFIG_PCI_LAYERSCAPE=y
 CONFIG_PCI_HISI=y
 CONFIG_PCIE_QCOM=y
 CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_PCIE_RCAR=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_XGENE=y
 CONFIG_ARM64_VA_BITS_48=y
 CONFIG_SCHED_MC=y
 CONFIG_NUMA=y
@@ -80,12 +78,11 @@
 CONFIG_TRANSPARENT_HUGEPAGE=y
 CONFIG_CMA=y
 CONFIG_SECCOMP=y
-CONFIG_XEN=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
+CONFIG_XEN=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_COMPAT=y
-CONFIG_CPU_IDLE=y
 CONFIG_HIBERNATION=y
 CONFIG_ARM_CPUIDLE=y
 CONFIG_CPU_FREQ=y
@@ -155,8 +152,8 @@
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
 CONFIG_VIRTIO_BLK=y
-CONFIG_EEPROM_AT25=m
 CONFIG_SRAM=y
+CONFIG_EEPROM_AT25=m
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_SAS_ATA=y
@@ -168,8 +165,8 @@
 CONFIG_AHCI_MVEBU=y
 CONFIG_AHCI_XGENE=y
 CONFIG_AHCI_QORIQ=y
-CONFIG_SATA_RCAR=y
 CONFIG_SATA_SIL24=y
+CONFIG_SATA_RCAR=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_PATA_OF_PLATFORM=y
 CONFIG_NETDEVICES=y
@@ -186,18 +183,17 @@
 CONFIG_E1000E=y
 CONFIG_IGB=y
 CONFIG_IGBVF=y
-CONFIG_MVPP2=y
 CONFIG_MVNETA=y
+CONFIG_MVPP2=y
 CONFIG_SKY2=y
 CONFIG_RAVB=y
 CONFIG_SMC91X=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=m
-CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
 CONFIG_MESON_GXL_PHY=m
 CONFIG_MICREL_PHY=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_REALTEK_PHY=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
 CONFIG_USB_RTL8152=m
@@ -230,14 +226,14 @@
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MESON=y
+CONFIG_SERIAL_MESON_CONSOLE=y
 CONFIG_SERIAL_SAMSUNG=y
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 CONFIG_SERIAL_TEGRA=y
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_NR_UARTS=11
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_MESON=y
-CONFIG_SERIAL_MESON_CONSOLE=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_XILINX_PS_UART=y
@@ -261,14 +257,14 @@
 CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
 CONFIG_SPI=y
-CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_BCM2835=m
 CONFIG_SPI_BCM2835AUX=m
+CONFIG_SPI_MESON_SPIFC=m
 CONFIG_SPI_ORION=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_QUP=y
-CONFIG_SPI_SPIDEV=m
 CONFIG_SPI_S3C64XX=y
+CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
 CONFIG_PINCTRL_SINGLE=y
 CONFIG_PINCTRL_MAX77620=y
@@ -286,33 +282,30 @@
 CONFIG_GPIO_PCA953X_IRQ=y
 CONFIG_GPIO_MAX77620=y
 CONFIG_POWER_RESET_MSM=y
-CONFIG_BATTERY_BQ27XXX=y
 CONFIG_POWER_RESET_XGENE=y
 CONFIG_POWER_RESET_SYSCON=y
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_SENSORS_ARM_SCPI=y
 CONFIG_SENSORS_LM90=m
 CONFIG_SENSORS_INA2XX=m
-CONFIG_SENSORS_ARM_SCPI=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_EMULATION=y
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
-CONFIG_BCM2835_THERMAL=y
+CONFIG_THERMAL_EMULATION=y
 CONFIG_EXYNOS_THERMAL=y
 CONFIG_WATCHDOG=y
-CONFIG_BCM2835_WDT=y
-CONFIG_RENESAS_WDT=y
 CONFIG_S3C2410_WATCHDOG=y
 CONFIG_MESON_GXBB_WATCHDOG=m
 CONFIG_MESON_WATCHDOG=m
-CONFIG_MFD_EXYNOS_LPASS=m
-CONFIG_MFD_MAX77620=y
-CONFIG_MFD_RK808=y
-CONFIG_MFD_SPMI_PMIC=y
-CONFIG_MFD_SEC_CORE=y
-CONFIG_MFD_HI655X_PMIC=y
-CONFIG_REGULATOR=y
+CONFIG_RENESAS_WDT=y
+CONFIG_BCM2835_WDT=y
 CONFIG_MFD_CROS_EC=y
 CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_EXYNOS_LPASS=m
+CONFIG_MFD_HI655X_PMIC=y
+CONFIG_MFD_MAX77620=y
+CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_RK808=y
+CONFIG_MFD_SEC_CORE=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_HI655X=y
@@ -345,13 +338,12 @@
 CONFIG_DRM_EXYNOS_HDMI=y
 CONFIG_DRM_EXYNOS_MIC=y
 CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_HDMI=y
 CONFIG_DRM_RCAR_LVDS=y
 CONFIG_DRM_RCAR_VSP=y
 CONFIG_DRM_TEGRA=m
-CONFIG_DRM_VC4=m
 CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_VC4=m
 CONFIG_DRM_HISI_KIRIN=m
 CONFIG_DRM_MESON=m
 CONFIG_FB=y
@@ -366,39 +358,37 @@
 CONFIG_SND=y
 CONFIG_SND_SOC=y
 CONFIG_SND_BCM2835_SOC_I2S=m
-CONFIG_SND_SOC_RCAR=y
 CONFIG_SND_SOC_SAMSUNG=y
+CONFIG_SND_SOC_RCAR=y
 CONFIG_SND_SOC_AK4613=y
 CONFIG_USB=y
 CONFIG_USB_OTG=y
 CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USB_XHCI_RCAR=y
-CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_XHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MSM=y
+CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_EXYNOS=y
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_EXYNOS=y
 CONFIG_USB_OHCI_HCD_PLATFORM=y
 CONFIG_USB_RENESAS_USBHS=m
 CONFIG_USB_STORAGE=y
-CONFIG_USB_DWC2=y
 CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_ISP1760=y
 CONFIG_USB_HSIC_USB3503=y
 CONFIG_USB_MSM_OTG=y
+CONFIG_USB_QCOM_8X16_PHY=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_MESON_GX=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_ACPI=y
 CONFIG_MMC_SDHCI_PLTFM=y
@@ -406,6 +396,7 @@
 CONFIG_MMC_SDHCI_OF_ESDHC=y
 CONFIG_MMC_SDHCI_CADENCE=y
 CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_MESON_GX=y
 CONFIG_MMC_SDHCI_MSM=y
 CONFIG_MMC_SPI=y
 CONFIG_MMC_SDHI=y
@@ -414,32 +405,31 @@
 CONFIG_MMC_DW_K3=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SUNXI=y
-CONFIG_MMC_SDHCI_XENON=y
 CONFIG_MMC_BCM2835=y
+CONFIG_MMC_SDHCI_XENON=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_PWM=y
 CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_S5M=y
 CONFIG_RTC_DRV_DS3232=y
 CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_S3C=y
 CONFIG_RTC_DRV_PL031=y
 CONFIG_RTC_DRV_SUN6I=y
-CONFIG_RTC_DRV_RK808=m
 CONFIG_RTC_DRV_TEGRA=y
 CONFIG_RTC_DRV_XGENE=y
-CONFIG_RTC_DRV_S3C=y
 CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2835=m
 CONFIG_MV_XOR_V2=y
 CONFIG_PL330_DMA=y
-CONFIG_DMA_BCM2835=m
 CONFIG_TEGRA20_APB_DMA=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_QCOM_HIDMA_MGMT=y
@@ -452,52 +442,53 @@
 CONFIG_VIRTIO_MMIO=y
 CONFIG_XEN_GNTDEV=y
 CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMMON_CLK_CS2000_CP=y
 CONFIG_COMMON_CLK_S2MPS11=y
-CONFIG_COMMON_CLK_PWM=y
-CONFIG_COMMON_CLK_RK808=y
 CONFIG_CLK_QORIQ=y
+CONFIG_COMMON_CLK_PWM=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_CLK_SMD_RPM=y
 CONFIG_MSM_GCC_8916=y
 CONFIG_MSM_GCC_8994=y
 CONFIG_MSM_MMCC_8996=y
 CONFIG_HWSPINLOCK_QCOM=y
-CONFIG_MAILBOX=y
 CONFIG_ARM_MHU=y
 CONFIG_PLATFORM_MHU=y
 CONFIG_BCM2835_MBOX=y
 CONFIG_HI6220_MBOX=y
 CONFIG_ARM_SMMU=y
 CONFIG_ARM_SMMU_V3=y
+CONFIG_RPMSG_QCOM_SMD=y
 CONFIG_RASPBERRYPI_POWER=y
 CONFIG_QCOM_SMEM=y
-CONFIG_QCOM_SMD=y
 CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
 CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_ARCH_TEGRA_132_SOC=y
 CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_ARCH_TEGRA_186_SOC=y
 CONFIG_EXTCON_USB_GPIO=y
+CONFIG_IIO=y
+CONFIG_EXYNOS_ADC=y
 CONFIG_PWM=y
 CONFIG_PWM_BCM2835=m
-CONFIG_PWM_ROCKCHIP=y
-CONFIG_PWM_TEGRA=m
 CONFIG_PWM_MESON=m
-CONFIG_COMMON_RESET_HI6220=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_PWM_SAMSUNG=y
+CONFIG_PWM_TEGRA=m
 CONFIG_PHY_RCAR_GEN3_USB2=y
 CONFIG_PHY_HI6220_USB=y
+CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PHY_ROCKCHIP_EMMC=y
-CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_XGENE=y
 CONFIG_PHY_TEGRA_XUSB=y
 CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_ACPI=y
-CONFIG_IIO=y
-CONFIG_EXYNOS_ADC=y
-CONFIG_PWM_SAMSUNG=y
 CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_ACPI=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
@@ -511,7 +502,6 @@
 CONFIG_CUSE=m
 CONFIG_OVERLAY_FS=m
 CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_CONFIGFS_FS=y
 CONFIG_EFIVAR_FS=y
@@ -539,11 +529,9 @@
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_ECHAINIV=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_CRYPTO_DEV_SAFEXCEL=m
 CONFIG_ARM64_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM64_CE=y
 CONFIG_CRYPTO_SHA2_ARM64_CE=y
 CONFIG_CRYPTO_GHASH_ARM64_CE=y
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
 CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
diff --git a/arch/cris/boot/dts/include/dt-bindings b/arch/cris/boot/dts/include/dt-bindings
deleted file mode 120000
index 08c00e4..0000000
--- a/arch/cris/boot/dts/include/dt-bindings
+++ /dev/null
@@ -1 +0,0 @@
-../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/metag/boot/dts/include/dt-bindings b/arch/metag/boot/dts/include/dt-bindings
deleted file mode 120000
index 08c00e4..0000000
--- a/arch/metag/boot/dts/include/dt-bindings
+++ /dev/null
@@ -1 +0,0 @@
-../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/mips/boot/dts/include/dt-bindings b/arch/mips/boot/dts/include/dt-bindings
deleted file mode 120000
index 08c00e4..0000000
--- a/arch/mips/boot/dts/include/dt-bindings
+++ /dev/null
@@ -1 +0,0 @@
-../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/arch/powerpc/boot/dts/include/dt-bindings b/arch/powerpc/boot/dts/include/dt-bindings
deleted file mode 120000
index 08c00e4..0000000
--- a/arch/powerpc/boot/dts/include/dt-bindings
+++ /dev/null
@@ -1 +0,0 @@
-../../../../../include/dt-bindings
\ No newline at end of file
diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c
index b6195fd..22e98a9 100644
--- a/drivers/soc/bcm/brcmstb/common.c
+++ b/drivers/soc/bcm/brcmstb/common.c
@@ -49,7 +49,7 @@
 	{ .compatible = "brcm,bcm7420-sun-top-ctrl", },
 	{ .compatible = "brcm,bcm7425-sun-top-ctrl", },
 	{ .compatible = "brcm,bcm7429-sun-top-ctrl", },
-	{ .compatible = "brcm,bcm7425-sun-top-ctrl", },
+	{ .compatible = "brcm,bcm7435-sun-top-ctrl", },
 	{ .compatible = "brcm,brcmstb-sun-top-ctrl", },
 	{ }
 };
diff --git a/drivers/tee/Kconfig b/drivers/tee/Kconfig
index 2330a4e..a6df12d 100644
--- a/drivers/tee/Kconfig
+++ b/drivers/tee/Kconfig
@@ -1,6 +1,7 @@
 # Generic Trusted Execution Environment Configuration
 config TEE
 	tristate "Trusted Execution Environment support"
+	depends on HAVE_ARM_SMCCC || COMPILE_TEST
 	select DMA_SHARED_BUFFER
 	select GENERIC_ALLOCATOR
 	help
diff --git a/include/linux/soc/renesas/rcar-rst.h b/include/linux/soc/renesas/rcar-rst.h
index a18e078..787e7ad 100644
--- a/include/linux/soc/renesas/rcar-rst.h
+++ b/include/linux/soc/renesas/rcar-rst.h
@@ -1,6 +1,11 @@
 #ifndef __LINUX_SOC_RENESAS_RCAR_RST_H__
 #define __LINUX_SOC_RENESAS_RCAR_RST_H__
 
+#if defined(CONFIG_ARCH_RCAR_GEN1) || defined(CONFIG_ARCH_RCAR_GEN2) || \
+    defined(CONFIG_ARCH_R8A7795) || defined(CONFIG_ARCH_R8A7796)
 int rcar_rst_read_mode_pins(u32 *mode);
+#else
+static inline int rcar_rst_read_mode_pins(u32 *mode) { return -ENODEV; }
+#endif
 
 #endif /* __LINUX_SOC_RENESAS_RCAR_RST_H__ */
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 6dc1eda1..58c05e5 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -175,7 +175,7 @@
 
 dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
 		 -I$(srctree)/arch/$(SRCARCH)/boot/dts                   \
-		 -I$(srctree)/arch/$(SRCARCH)/boot/dts/include           \
+		 -I$(srctree)/scripts/dtc/include-prefixes               \
 		 -I$(srctree)/drivers/of/testcase-data                   \
 		 -undef -D__DTS__
 
diff --git a/scripts/dtc/include-prefixes/arc b/scripts/dtc/include-prefixes/arc
new file mode 120000
index 0000000..5d21b5a
--- /dev/null
+++ b/scripts/dtc/include-prefixes/arc
@@ -0,0 +1 @@
+../../../arch/arc/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/arm b/scripts/dtc/include-prefixes/arm
new file mode 120000
index 0000000..eb14d45
--- /dev/null
+++ b/scripts/dtc/include-prefixes/arm
@@ -0,0 +1 @@
+../../../arch/arm/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/arm64 b/scripts/dtc/include-prefixes/arm64
new file mode 120000
index 0000000..275c42c
--- /dev/null
+++ b/scripts/dtc/include-prefixes/arm64
@@ -0,0 +1 @@
+../../../arch/arm64/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/c6x b/scripts/dtc/include-prefixes/c6x
new file mode 120000
index 0000000..49ded4c
--- /dev/null
+++ b/scripts/dtc/include-prefixes/c6x
@@ -0,0 +1 @@
+../../../arch/c6x/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/cris b/scripts/dtc/include-prefixes/cris
new file mode 120000
index 0000000..736d998
--- /dev/null
+++ b/scripts/dtc/include-prefixes/cris
@@ -0,0 +1 @@
+../../../arch/cris/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/dt-bindings b/scripts/dtc/include-prefixes/dt-bindings
new file mode 120000
index 0000000..04fdbb3
--- /dev/null
+++ b/scripts/dtc/include-prefixes/dt-bindings
@@ -0,0 +1 @@
+../../../include/dt-bindings
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/h8300 b/scripts/dtc/include-prefixes/h8300
new file mode 120000
index 0000000..3bdaa33
--- /dev/null
+++ b/scripts/dtc/include-prefixes/h8300
@@ -0,0 +1 @@
+../../../arch/h8300/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/metag b/scripts/dtc/include-prefixes/metag
new file mode 120000
index 0000000..87a3c84
--- /dev/null
+++ b/scripts/dtc/include-prefixes/metag
@@ -0,0 +1 @@
+../../../arch/metag/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/microblaze b/scripts/dtc/include-prefixes/microblaze
new file mode 120000
index 0000000..d983033
--- /dev/null
+++ b/scripts/dtc/include-prefixes/microblaze
@@ -0,0 +1 @@
+../../../arch/microblaze/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/mips b/scripts/dtc/include-prefixes/mips
new file mode 120000
index 0000000..ae8d494
--- /dev/null
+++ b/scripts/dtc/include-prefixes/mips
@@ -0,0 +1 @@
+../../../arch/mips/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/nios2 b/scripts/dtc/include-prefixes/nios2
new file mode 120000
index 0000000..5177233
--- /dev/null
+++ b/scripts/dtc/include-prefixes/nios2
@@ -0,0 +1 @@
+../../../arch/nios2/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/openrisc b/scripts/dtc/include-prefixes/openrisc
new file mode 120000
index 0000000..71c3bc7
--- /dev/null
+++ b/scripts/dtc/include-prefixes/openrisc
@@ -0,0 +1 @@
+../../../arch/openrisc/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/powerpc b/scripts/dtc/include-prefixes/powerpc
new file mode 120000
index 0000000..7cd6ec1
--- /dev/null
+++ b/scripts/dtc/include-prefixes/powerpc
@@ -0,0 +1 @@
+../../../arch/powerpc/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/sh b/scripts/dtc/include-prefixes/sh
new file mode 120000
index 0000000..67d3780
--- /dev/null
+++ b/scripts/dtc/include-prefixes/sh
@@ -0,0 +1 @@
+../../../arch/sh/boot/dts
\ No newline at end of file
diff --git a/scripts/dtc/include-prefixes/xtensa b/scripts/dtc/include-prefixes/xtensa
new file mode 120000
index 0000000..d1eaf6e
--- /dev/null
+++ b/scripts/dtc/include-prefixes/xtensa
@@ -0,0 +1 @@
+../../../arch/xtensa/boot/dts
\ No newline at end of file