blob: 03f63f50afb6213d58b498f559021db28f8a4d5a [file] [log] [blame]
/*
* xHCI host controller driver
*
* Copyright (C) 2008 Intel Corp.
*
* Author: Sarah Sharp
* Some code borrowed from the Linux EHCI driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* Ring initialization rules:
* 1. Each segment is initialized to zero, except for link TRBs.
* 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
* Consumer Cycle State (CCS), depending on ring function.
* 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
*
* Ring behavior rules:
* 1. A ring is empty if enqueue == dequeue. This means there will always be at
* least one free TRB in the ring. This is useful if you want to turn that
* into a link TRB and expand the ring.
* 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
* link TRB, then load the pointer with the address in the link TRB. If the
* link TRB had its toggle bit set, you may need to update the ring cycle
* state (see cycle bit rules). You may have to do this multiple times
* until you reach a non-link TRB.
* 3. A ring is full if enqueue++ (for the definition of increment above)
* equals the dequeue pointer.
*
* Cycle bit rules:
* 1. When a consumer increments a dequeue pointer and encounters a toggle bit
* in a link TRB, it must toggle the ring cycle state.
* 2. When a producer increments an enqueue pointer and encounters a toggle bit
* in a link TRB, it must toggle the ring cycle state.
*
* Producer rules:
* 1. Check if ring is full before you enqueue.
* 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
* Update enqueue pointer between each write (which may update the ring
* cycle state).
* 3. Notify consumer. If SW is producer, it rings the doorbell for command
* and endpoint rings. If HC is the producer for the event ring,
* and it generates an interrupt according to interrupt modulation rules.
*
* Consumer rules:
* 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
* the TRB is owned by the consumer.
* 2. Update dequeue pointer (which may update the ring cycle state) and
* continue processing TRBs until you reach a TRB which is not owned by you.
* 3. Notify the producer. SW is the consumer for the event ring, and it
* updates event ring dequeue pointer. HC is the consumer for the command and
* endpoint rings; it generates events on the event ring for these.
*/
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include "xhci.h"
#include "xhci-trace.h"
#include "xhci-mtk.h"
/*
* Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
* address of the TRB.
*/
dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
union xhci_trb *trb)
{
unsigned long segment_offset;
if (!seg || !trb || trb < seg->trbs)
return 0;
/* offset in TRBs */
segment_offset = trb - seg->trbs;
if (segment_offset >= TRBS_PER_SEGMENT)
return 0;
return seg->dma + (segment_offset * sizeof(*trb));
}
static bool trb_is_noop(union xhci_trb *trb)
{
return TRB_TYPE_NOOP_LE32(trb->generic.field[3]);
}
static bool trb_is_link(union xhci_trb *trb)
{
return TRB_TYPE_LINK_LE32(trb->link.control);
}
static bool last_trb_on_seg(struct xhci_segment *seg, union xhci_trb *trb)
{
return trb == &seg->trbs[TRBS_PER_SEGMENT - 1];
}
static bool last_trb_on_ring(struct xhci_ring *ring,
struct xhci_segment *seg, union xhci_trb *trb)
{
return last_trb_on_seg(seg, trb) && (seg->next == ring->first_seg);
}
static bool link_trb_toggles_cycle(union xhci_trb *trb)
{
return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
}
static bool last_td_in_urb(struct xhci_td *td)
{
struct urb_priv *urb_priv = td->urb->hcpriv;
return urb_priv->num_tds_done == urb_priv->num_tds;
}
static void inc_td_cnt(struct urb *urb)
{
struct urb_priv *urb_priv = urb->hcpriv;
urb_priv->num_tds_done++;
}
static void trb_to_noop(union xhci_trb *trb, u32 noop_type)
{
if (trb_is_link(trb)) {
/* unchain chained link TRBs */
trb->link.control &= cpu_to_le32(~TRB_CHAIN);
} else {
trb->generic.field[0] = 0;
trb->generic.field[1] = 0;
trb->generic.field[2] = 0;
/* Preserve only the cycle bit of this TRB */
trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
trb->generic.field[3] |= cpu_to_le32(TRB_TYPE(noop_type));
}
}
/* Updates trb to point to the next TRB in the ring, and updates seg if the next
* TRB is in a new segment. This does not skip over link TRBs, and it does not
* effect the ring dequeue or enqueue pointers.
*/
static void next_trb(struct xhci_hcd *xhci,
struct xhci_ring *ring,
struct xhci_segment **seg,
union xhci_trb **trb)
{
if (trb_is_link(*trb)) {
*seg = (*seg)->next;
*trb = ((*seg)->trbs);
} else {
(*trb)++;
}
}
/*
* See Cycle bit rules. SW is the consumer for the event ring only.
* Don't make a ring full of link TRBs. That would be dumb and this would loop.
*/
static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring)
{
/* event ring doesn't have link trbs, check for last trb */
if (ring->type == TYPE_EVENT) {
if (!last_trb_on_seg(ring->deq_seg, ring->dequeue)) {
ring->dequeue++;
return;
}
if (last_trb_on_ring(ring, ring->deq_seg, ring->dequeue))
ring->cycle_state ^= 1;
ring->deq_seg = ring->deq_seg->next;
ring->dequeue = ring->deq_seg->trbs;
return;
}
/* All other rings have link trbs */
if (!trb_is_link(ring->dequeue)) {
ring->dequeue++;
ring->num_trbs_free++;
}
while (trb_is_link(ring->dequeue)) {
ring->deq_seg = ring->deq_seg->next;
ring->dequeue = ring->deq_seg->trbs;
}
trace_xhci_inc_deq(ring);
return;
}
/*
* See Cycle bit rules. SW is the consumer for the event ring only.
* Don't make a ring full of link TRBs. That would be dumb and this would loop.
*
* If we've just enqueued a TRB that is in the middle of a TD (meaning the
* chain bit is set), then set the chain bit in all the following link TRBs.
* If we've enqueued the last TRB in a TD, make sure the following link TRBs
* have their chain bit cleared (so that each Link TRB is a separate TD).
*
* Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
* set, but other sections talk about dealing with the chain bit set. This was
* fixed in the 0.96 specification errata, but we have to assume that all 0.95
* xHCI hardware can't handle the chain bit being cleared on a link TRB.
*
* @more_trbs_coming: Will you enqueue more TRBs before calling
* prepare_transfer()?
*/
static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
bool more_trbs_coming)
{
u32 chain;
union xhci_trb *next;
chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
/* If this is not event ring, there is one less usable TRB */
if (!trb_is_link(ring->enqueue))
ring->num_trbs_free--;
next = ++(ring->enqueue);
/* Update the dequeue pointer further if that was a link TRB */
while (trb_is_link(next)) {
/*
* If the caller doesn't plan on enqueueing more TDs before
* ringing the doorbell, then we don't want to give the link TRB
* to the hardware just yet. We'll give the link TRB back in
* prepare_ring() just before we enqueue the TD at the top of
* the ring.
*/
if (!chain && !more_trbs_coming)
break;
/* If we're not dealing with 0.95 hardware or isoc rings on
* AMD 0.96 host, carry over the chain bit of the previous TRB
* (which may mean the chain bit is cleared).
*/
if (!(ring->type == TYPE_ISOC &&
(xhci->quirks & XHCI_AMD_0x96_HOST)) &&
!xhci_link_trb_quirk(xhci)) {
next->link.control &= cpu_to_le32(~TRB_CHAIN);
next->link.control |= cpu_to_le32(chain);
}
/* Give this link TRB to the hardware */
wmb();
next->link.control ^= cpu_to_le32(TRB_CYCLE);
/* Toggle the cycle bit after the last ring segment. */
if (link_trb_toggles_cycle(next))
ring->cycle_state ^= 1;
ring->enq_seg = ring->enq_seg->next;
ring->enqueue = ring->enq_seg->trbs;
next = ring->enqueue;
}
trace_xhci_inc_enq(ring);
}
/*
* Check to see if there's room to enqueue num_trbs on the ring and make sure
* enqueue pointer will not advance into dequeue segment. See rules above.
*/
static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
unsigned int num_trbs)
{
int num_trbs_in_deq_seg;
if (ring->num_trbs_free < num_trbs)
return 0;
if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
return 0;
}
return 1;
}
/* Ring the host controller doorbell after placing a command on the ring */
void xhci_ring_cmd_db(struct xhci_hcd *xhci)
{
if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING))
return;
xhci_dbg(xhci, "// Ding dong!\n");
writel(DB_VALUE_HOST, &xhci->dba->doorbell[0]);
/* Flush PCI posted writes */
readl(&xhci->dba->doorbell[0]);
}
static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay)
{
return mod_delayed_work(system_wq, &xhci->cmd_timer, delay);
}
static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci)
{
return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command,
cmd_list);
}
/*
* Turn all commands on command ring with status set to "aborted" to no-op trbs.
* If there are other commands waiting then restart the ring and kick the timer.
* This must be called with command ring stopped and xhci->lock held.
*/
static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
struct xhci_command *cur_cmd)
{
struct xhci_command *i_cmd;
/* Turn all aborted commands in list to no-ops, then restart */
list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) {
if (i_cmd->status != COMP_COMMAND_ABORTED)
continue;
i_cmd->status = COMP_COMMAND_RING_STOPPED;
xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
i_cmd->command_trb);
trb_to_noop(i_cmd->command_trb, TRB_CMD_NOOP);
/*
* caller waiting for completion is called when command
* completion event is received for these no-op commands
*/
}
xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
/* ring command ring doorbell to restart the command ring */
if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
!(xhci->xhc_state & XHCI_STATE_DYING)) {
xhci->current_cmd = cur_cmd;
xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
xhci_ring_cmd_db(xhci);
}
}
/* Must be called with xhci->lock held, releases and aquires lock back */
static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
{
u64 temp_64;
int ret;
xhci_dbg(xhci, "Abort command ring\n");
reinit_completion(&xhci->cmd_ring_stop_completion);
temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
&xhci->op_regs->cmd_ring);
/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
* completion of the Command Abort operation. If CRR is not negated in 5
* seconds then driver handles it as if host died (-ENODEV).
* In the future we should distinguish between -ENODEV and -ETIMEDOUT
* and try to recover a -ETIMEDOUT with a host controller reset.
*/
ret = xhci_handshake(&xhci->op_regs->cmd_ring,
CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
if (ret < 0) {
xhci_err(xhci, "Abort failed to stop command ring: %d\n", ret);
xhci_halt(xhci);
xhci_hc_died(xhci);
return ret;
}
/*
* Writing the CMD_RING_ABORT bit should cause a cmd completion event,
* however on some host hw the CMD_RING_RUNNING bit is correctly cleared
* but the completion event in never sent. Wait 2 secs (arbitrary
* number) to handle those cases after negation of CMD_RING_RUNNING.
*/
spin_unlock_irqrestore(&xhci->lock, flags);
ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion,
msecs_to_jiffies(2000));
spin_lock_irqsave(&xhci->lock, flags);
if (!ret) {
xhci_dbg(xhci, "No stop event for abort, ring start fail?\n");
xhci_cleanup_command_queue(xhci);
} else {
xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci));
}
return 0;
}
void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
unsigned int slot_id,
unsigned int ep_index,
unsigned int stream_id)
{
__le32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
unsigned int ep_state = ep->ep_state;
/* Don't ring the doorbell for this endpoint if there are pending
* cancellations because we don't want to interrupt processing.
* We don't want to restart any stream rings if there's a set dequeue
* pointer command pending because the device can choose to start any
* stream once the endpoint is on the HW schedule.
*/
if ((ep_state & EP_STOP_CMD_PENDING) || (ep_state & SET_DEQ_PENDING) ||
(ep_state & EP_HALTED))
return;
writel(DB_VALUE(ep_index, stream_id), db_addr);
/* The CPU has better things to do at this point than wait for a
* write-posting flush. It'll get there soon enough.
*/
}
/* Ring the doorbell for any rings with pending URBs */
static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
unsigned int slot_id,
unsigned int ep_index)
{
unsigned int stream_id;
struct xhci_virt_ep *ep;
ep = &xhci->devs[slot_id]->eps[ep_index];
/* A ring has pending URBs if its TD list is not empty */
if (!(ep->ep_state & EP_HAS_STREAMS)) {
if (ep->ring && !(list_empty(&ep->ring->td_list)))
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0);
return;
}
for (stream_id = 1; stream_id < ep->stream_info->num_streams;
stream_id++) {
struct xhci_stream_info *stream_info = ep->stream_info;
if (!list_empty(&stream_info->stream_rings[stream_id]->td_list))
xhci_ring_ep_doorbell(xhci, slot_id, ep_index,
stream_id);
}
}
/* Get the right ring for the given slot_id, ep_index and stream_id.
* If the endpoint supports streams, boundary check the URB's stream ID.
* If the endpoint doesn't support streams, return the singular endpoint ring.
*/
struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
unsigned int stream_id)
{
struct xhci_virt_ep *ep;
ep = &xhci->devs[slot_id]->eps[ep_index];
/* Common case: no streams */
if (!(ep->ep_state & EP_HAS_STREAMS))
return ep->ring;
if (stream_id == 0) {
xhci_warn(xhci,
"WARN: Slot ID %u, ep index %u has streams, "
"but URB has no stream ID.\n",
slot_id, ep_index);
return NULL;
}
if (stream_id < ep->stream_info->num_streams)
return ep->stream_info->stream_rings[stream_id];
xhci_warn(xhci,
"WARN: Slot ID %u, ep index %u has "
"stream IDs 1 to %u allocated, "
"but stream ID %u is requested.\n",
slot_id, ep_index,
ep->stream_info->num_streams - 1,
stream_id);
return NULL;
}
/*
* Move the xHC's endpoint ring dequeue pointer past cur_td.
* Record the new state of the xHC's endpoint ring dequeue segment,
* dequeue pointer, and new consumer cycle state in state.
* Update our internal representation of the ring's dequeue pointer.
*
* We do this in three jumps:
* - First we update our new ring state to be the same as when the xHC stopped.
* - Then we traverse the ring to find the segment that contains
* the last TRB in the TD. We toggle the xHC's new cycle state when we pass
* any link TRBs with the toggle cycle bit set.
* - Finally we move the dequeue state one TRB further, toggling the cycle bit
* if we've moved it past a link TRB with the toggle cycle bit set.
*
* Some of the uses of xhci_generic_trb are grotty, but if they're done
* with correct __le32 accesses they should work fine. Only users of this are
* in here.
*/
void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
unsigned int stream_id, struct xhci_td *cur_td,
struct xhci_dequeue_state *state)
{
struct xhci_virt_device *dev = xhci->devs[slot_id];
struct xhci_virt_ep *ep = &dev->eps[ep_index];
struct xhci_ring *ep_ring;
struct xhci_segment *new_seg;
union xhci_trb *new_deq;
dma_addr_t addr;
u64 hw_dequeue;
bool cycle_found = false;
bool td_last_trb_found = false;
ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
ep_index, stream_id);
if (!ep_ring) {
xhci_warn(xhci, "WARN can't find new dequeue state "
"for invalid stream ID %u.\n",
stream_id);
return;
}
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding endpoint context");
/* 4.6.9 the css flag is written to the stream context for streams */
if (ep->ep_state & EP_HAS_STREAMS) {
struct xhci_stream_ctx *ctx =
&ep->stream_info->stream_ctx_array[stream_id];
hw_dequeue = le64_to_cpu(ctx->stream_ring);
} else {
struct xhci_ep_ctx *ep_ctx
= xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
hw_dequeue = le64_to_cpu(ep_ctx->deq);
}
new_seg = ep_ring->deq_seg;
new_deq = ep_ring->dequeue;
state->new_cycle_state = hw_dequeue & 0x1;
/*
* We want to find the pointer, segment and cycle state of the new trb
* (the one after current TD's last_trb). We know the cycle state at
* hw_dequeue, so walk the ring until both hw_dequeue and last_trb are
* found.
*/
do {
if (!cycle_found && xhci_trb_virt_to_dma(new_seg, new_deq)
== (dma_addr_t)(hw_dequeue & ~0xf)) {
cycle_found = true;
if (td_last_trb_found)
break;
}
if (new_deq == cur_td->last_trb)
td_last_trb_found = true;
if (cycle_found && trb_is_link(new_deq) &&
link_trb_toggles_cycle(new_deq))
state->new_cycle_state ^= 0x1;
next_trb(xhci, ep_ring, &new_seg, &new_deq);
/* Search wrapped around, bail out */
if (new_deq == ep->ring->dequeue) {
xhci_err(xhci, "Error: Failed finding new dequeue state\n");
state->new_deq_seg = NULL;
state->new_deq_ptr = NULL;
return;
}
} while (!cycle_found || !td_last_trb_found);
state->new_deq_seg = new_seg;
state->new_deq_ptr = new_deq;
/* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Cycle state = 0x%x", state->new_cycle_state);
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"New dequeue segment = %p (virtual)",
state->new_deq_seg);
addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"New dequeue pointer = 0x%llx (DMA)",
(unsigned long long) addr);
}
/* flip_cycle means flip the cycle bit of all but the first and last TRB.
* (The last TRB actually points to the ring enqueue pointer, which is not part
* of this TD.) This is used to remove partially enqueued isoc TDs from a ring.
*/
static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
struct xhci_td *td, bool flip_cycle)
{
struct xhci_segment *seg = td->start_seg;
union xhci_trb *trb = td->first_trb;
while (1) {
trb_to_noop(trb, TRB_TR_NOOP);
/* flip cycle if asked to */
if (flip_cycle && trb != td->first_trb && trb != td->last_trb)
trb->generic.field[3] ^= cpu_to_le32(TRB_CYCLE);
if (trb == td->last_trb)
break;
next_trb(xhci, ep_ring, &seg, &trb);
}
}
static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
struct xhci_virt_ep *ep)
{
ep->ep_state &= ~EP_STOP_CMD_PENDING;
/* Can't del_timer_sync in interrupt */
del_timer(&ep->stop_cmd_timer);
}
/*
* Must be called with xhci->lock held in interrupt context,
* releases and re-acquires xhci->lock
*/
static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
struct xhci_td *cur_td, int status)
{
struct urb *urb = cur_td->urb;
struct urb_priv *urb_priv = urb->hcpriv;
struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
if (xhci->quirks & XHCI_AMD_PLL_FIX)
usb_amd_quirk_pll_enable();
}
}
xhci_urb_free_priv(urb_priv);
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock(&xhci->lock);
trace_xhci_urb_giveback(urb);
usb_hcd_giveback_urb(hcd, urb, status);
spin_lock(&xhci->lock);
}
static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci,
struct xhci_ring *ring, struct xhci_td *td)
{
struct device *dev = xhci_to_hcd(xhci)->self.controller;
struct xhci_segment *seg = td->bounce_seg;
struct urb *urb = td->urb;
if (!ring || !seg || !urb)
return;
if (usb_urb_dir_out(urb)) {
dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
DMA_TO_DEVICE);
return;
}
/* for in tranfers we need to copy the data from bounce to sg */
sg_pcopy_from_buffer(urb->sg, urb->num_mapped_sgs, seg->bounce_buf,
seg->bounce_len, seg->bounce_offs);
dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
DMA_FROM_DEVICE);
seg->bounce_len = 0;
seg->bounce_offs = 0;
}
/*
* When we get a command completion for a Stop Endpoint Command, we need to
* unlink any cancelled TDs from the ring. There are two ways to do that:
*
* 1. If the HW was in the middle of processing the TD that needs to be
* cancelled, then we must move the ring's dequeue pointer past the last TRB
* in the TD with a Set Dequeue Pointer Command.
* 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
* bit cleared) so that the HW will skip over them.
*/
static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
union xhci_trb *trb, struct xhci_event_cmd *event)
{
unsigned int ep_index;
struct xhci_ring *ep_ring;
struct xhci_virt_ep *ep;
struct xhci_td *cur_td = NULL;
struct xhci_td *last_unlinked_td;
struct xhci_ep_ctx *ep_ctx;
struct xhci_virt_device *vdev;
struct xhci_dequeue_state deq_state;
if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) {
if (!xhci->devs[slot_id])
xhci_warn(xhci, "Stop endpoint command "
"completion for disabled slot %u\n",
slot_id);
return;
}
memset(&deq_state, 0, sizeof(deq_state));
ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
vdev = xhci->devs[slot_id];
ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
trace_xhci_handle_cmd_stop_ep(ep_ctx);
ep = &xhci->devs[slot_id]->eps[ep_index];
last_unlinked_td = list_last_entry(&ep->cancelled_td_list,
struct xhci_td, cancelled_td_list);
if (list_empty(&ep->cancelled_td_list)) {
xhci_stop_watchdog_timer_in_irq(xhci, ep);
ep->stopped_td = NULL;
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
return;
}
/* Fix up the ep ring first, so HW stops executing cancelled TDs.
* We have the xHCI lock, so nothing can modify this list until we drop
* it. We're also in the event handler, so we can't get re-interrupted
* if another Stop Endpoint command completes
*/
list_for_each_entry(cur_td, &ep->cancelled_td_list, cancelled_td_list) {
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Removing canceled TD starting at 0x%llx (dma).",
(unsigned long long)xhci_trb_virt_to_dma(
cur_td->start_seg, cur_td->first_trb));
ep_ring = xhci_urb_to_transfer_ring(xhci, cur_td->urb);
if (!ep_ring) {
/* This shouldn't happen unless a driver is mucking
* with the stream ID after submission. This will
* leave the TD on the hardware ring, and the hardware
* will try to execute it, and may access a buffer
* that has already been freed. In the best case, the
* hardware will execute it, and the event handler will
* ignore the completion event for that TD, since it was
* removed from the td_list for that endpoint. In
* short, don't muck with the stream ID after
* submission.
*/
xhci_warn(xhci, "WARN Cancelled URB %p "
"has invalid stream ID %u.\n",
cur_td->urb,
cur_td->urb->stream_id);
goto remove_finished_td;
}
/*
* If we stopped on the TD we need to cancel, then we have to
* move the xHC endpoint ring dequeue pointer past this TD.
*/
if (cur_td == ep->stopped_td)
xhci_find_new_dequeue_state(xhci, slot_id, ep_index,
cur_td->urb->stream_id,
cur_td, &deq_state);
else
td_to_noop(xhci, ep_ring, cur_td, false);
remove_finished_td:
/*
* The event handler won't see a completion for this TD anymore,
* so remove it from the endpoint ring's TD list. Keep it in
* the cancelled TD list for URB completion later.
*/
list_del_init(&cur_td->td_list);
}
xhci_stop_watchdog_timer_in_irq(xhci, ep);
/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
xhci_queue_new_dequeue_state(xhci, slot_id, ep_index,
ep->stopped_td->urb->stream_id, &deq_state);
xhci_ring_cmd_db(xhci);
} else {
/* Otherwise ring the doorbell(s) to restart queued transfers */
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
ep->stopped_td = NULL;
/*
* Drop the lock and complete the URBs in the cancelled TD list.
* New TDs to be cancelled might be added to the end of the list before
* we can complete all the URBs for the TDs we already unlinked.
* So stop when we've completed the URB for the last TD we unlinked.
*/
do {
cur_td = list_first_entry(&ep->cancelled_td_list,
struct xhci_td, cancelled_td_list);
list_del_init(&cur_td->cancelled_td_list);
/* Clean up the cancelled URB */
/* Doesn't matter what we pass for status, since the core will
* just overwrite it (because the URB has been unlinked).
*/
ep_ring = xhci_urb_to_transfer_ring(xhci, cur_td->urb);
xhci_unmap_td_bounce_buffer(xhci, ep_ring, cur_td);
inc_td_cnt(cur_td->urb);
if (last_td_in_urb(cur_td))
xhci_giveback_urb_in_irq(xhci, cur_td, 0);
/* Stop processing the cancelled list if the watchdog timer is
* running.
*/
if (xhci->xhc_state & XHCI_STATE_DYING)
return;
} while (cur_td != last_unlinked_td);
/* Return to the event handler with xhci->lock re-acquired */
}
static void xhci_kill_ring_urbs(struct xhci_hcd *xhci, struct xhci_ring *ring)
{
struct xhci_td *cur_td;
struct xhci_td *tmp;
list_for_each_entry_safe(cur_td, tmp, &ring->td_list, td_list) {
list_del_init(&cur_td->td_list);
if (!list_empty(&cur_td->cancelled_td_list))
list_del_init(&cur_td->cancelled_td_list);
xhci_unmap_td_bounce_buffer(xhci, ring, cur_td);
inc_td_cnt(cur_td->urb);
if (last_td_in_urb(cur_td))
xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
}
}
static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci,
int slot_id, int ep_index)
{
struct xhci_td *cur_td;
struct xhci_td *tmp;
struct xhci_virt_ep *ep;
struct xhci_ring *ring;
ep = &xhci->devs[slot_id]->eps[ep_index];
if ((ep->ep_state & EP_HAS_STREAMS) ||
(ep->ep_state & EP_GETTING_NO_STREAMS)) {
int stream_id;
for (stream_id = 0; stream_id < ep->stream_info->num_streams;
stream_id++) {
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Killing URBs for slot ID %u, ep index %u, stream %u",
slot_id, ep_index, stream_id + 1);
xhci_kill_ring_urbs(xhci,
ep->stream_info->stream_rings[stream_id]);
}
} else {
ring = ep->ring;
if (!ring)
return;
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Killing URBs for slot ID %u, ep index %u",
slot_id, ep_index);
xhci_kill_ring_urbs(xhci, ring);
}
list_for_each_entry_safe(cur_td, tmp, &ep->cancelled_td_list,
cancelled_td_list) {
list_del_init(&cur_td->cancelled_td_list);
inc_td_cnt(cur_td->urb);
if (last_td_in_urb(cur_td))
xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
}
}
/*
* host controller died, register read returns 0xffffffff
* Complete pending commands, mark them ABORTED.
* URBs need to be given back as usb core might be waiting with device locks
* held for the URBs to finish during device disconnect, blocking host remove.
*
* Call with xhci->lock held.
* lock is relased and re-acquired while giving back urb.
*/
void xhci_hc_died(struct xhci_hcd *xhci)
{
int i, j;
if (xhci->xhc_state & XHCI_STATE_DYING)
return;
xhci_err(xhci, "xHCI host controller not responding, assume dead\n");
xhci->xhc_state |= XHCI_STATE_DYING;
xhci_cleanup_command_queue(xhci);
/* return any pending urbs, remove may be waiting for them */
for (i = 0; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
if (!xhci->devs[i])
continue;
for (j = 0; j < 31; j++)
xhci_kill_endpoint_urbs(xhci, i, j);
}
/* inform usb core hc died if PCI remove isn't already handling it */
if (!(xhci->xhc_state & XHCI_STATE_REMOVING))
usb_hc_died(xhci_to_hcd(xhci));
}
/* Watchdog timer function for when a stop endpoint command fails to complete.
* In this case, we assume the host controller is broken or dying or dead. The
* host may still be completing some other events, so we have to be careful to
* let the event ring handler and the URB dequeueing/enqueueing functions know
* through xhci->state.
*
* The timer may also fire if the host takes a very long time to respond to the
* command, and the stop endpoint command completion handler cannot delete the
* timer before the timer function is called. Another endpoint cancellation may
* sneak in before the timer function can grab the lock, and that may queue
* another stop endpoint command and add the timer back. So we cannot use a
* simple flag to say whether there is a pending stop endpoint command for a
* particular endpoint.
*
* Instead we use a combination of that flag and checking if a new timer is
* pending.
*/
void xhci_stop_endpoint_command_watchdog(unsigned long arg)
{
struct xhci_hcd *xhci;
struct xhci_virt_ep *ep;
unsigned long flags;
ep = (struct xhci_virt_ep *) arg;
xhci = ep->xhci;
spin_lock_irqsave(&xhci->lock, flags);
/* bail out if cmd completed but raced with stop ep watchdog timer.*/
if (!(ep->ep_state & EP_STOP_CMD_PENDING) ||
timer_pending(&ep->stop_cmd_timer)) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "Stop EP timer raced with cmd completion, exit");
return;
}
xhci_warn(xhci, "xHCI host not responding to stop endpoint command.\n");
ep->ep_state &= ~EP_STOP_CMD_PENDING;
xhci_halt(xhci);
/*
* handle a stop endpoint cmd timeout as if host died (-ENODEV).
* In the future we could distinguish between -ENODEV and -ETIMEDOUT
* and try to recover a -ETIMEDOUT with a host controller reset
*/
xhci_hc_died(xhci);
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"xHCI host controller is dead.");
}
static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci,
struct xhci_virt_device *dev,
struct xhci_ring *ep_ring,
unsigned int ep_index)
{
union xhci_trb *dequeue_temp;
int num_trbs_free_temp;
bool revert = false;
num_trbs_free_temp = ep_ring->num_trbs_free;
dequeue_temp = ep_ring->dequeue;
/* If we get two back-to-back stalls, and the first stalled transfer
* ends just before a link TRB, the dequeue pointer will be left on
* the link TRB by the code in the while loop. So we have to update
* the dequeue pointer one segment further, or we'll jump off
* the segment into la-la-land.
*/
if (trb_is_link(ep_ring->dequeue)) {
ep_ring->deq_seg = ep_ring->deq_seg->next;
ep_ring->dequeue = ep_ring->deq_seg->trbs;
}
while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
/* We have more usable TRBs */
ep_ring->num_trbs_free++;
ep_ring->dequeue++;
if (trb_is_link(ep_ring->dequeue)) {
if (ep_ring->dequeue ==
dev->eps[ep_index].queued_deq_ptr)
break;
ep_ring->deq_seg = ep_ring->deq_seg->next;
ep_ring->dequeue = ep_ring->deq_seg->trbs;
}
if (ep_ring->dequeue == dequeue_temp) {
revert = true;
break;
}
}
if (revert) {
xhci_dbg(xhci, "Unable to find new dequeue pointer\n");
ep_ring->num_trbs_free = num_trbs_free_temp;
}
}
/*
* When we get a completion for a Set Transfer Ring Dequeue Pointer command,
* we need to clear the set deq pending flag in the endpoint ring state, so that
* the TD queueing code can ring the doorbell again. We also need to ring the
* endpoint doorbell to restart the ring, but only if there aren't more
* cancellations pending.
*/
static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
union xhci_trb *trb, u32 cmd_comp_code)
{
unsigned int ep_index;
unsigned int stream_id;
struct xhci_ring *ep_ring;
struct xhci_virt_device *dev;
struct xhci_virt_ep *ep;
struct xhci_ep_ctx *ep_ctx;
struct xhci_slot_ctx *slot_ctx;
ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
dev = xhci->devs[slot_id];
ep = &dev->eps[ep_index];
ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id);
if (!ep_ring) {
xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n",
stream_id);
/* XXX: Harmless??? */
goto cleanup;
}
ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
trace_xhci_handle_cmd_set_deq(slot_ctx);
trace_xhci_handle_cmd_set_deq_ep(ep_ctx);
if (cmd_comp_code != COMP_SUCCESS) {
unsigned int ep_state;
unsigned int slot_state;
switch (cmd_comp_code) {
case COMP_TRB_ERROR:
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because of stream ID configuration\n");
break;
case COMP_CONTEXT_STATE_ERROR:
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.\n");
ep_state = GET_EP_CTX_STATE(ep_ctx);
slot_state = le32_to_cpu(slot_ctx->dev_state);
slot_state = GET_SLOT_STATE(slot_state);
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Slot state = %u, EP state = %u",
slot_state, ep_state);
break;
case COMP_SLOT_NOT_ENABLED_ERROR:
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because slot %u was not enabled.\n",
slot_id);
break;
default:
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown completion code of %u.\n",
cmd_comp_code);
break;
}
/* OK what do we do now? The endpoint state is hosed, and we
* should never get to this point if the synchronization between
* queueing, and endpoint state are correct. This might happen
* if the device gets disconnected after we've finished
* cancelling URBs, which might not be an error...
*/
} else {
u64 deq;
/* 4.6.10 deq ptr is written to the stream ctx for streams */
if (ep->ep_state & EP_HAS_STREAMS) {
struct xhci_stream_ctx *ctx =
&ep->stream_info->stream_ctx_array[stream_id];
deq = le64_to_cpu(ctx->stream_ring) & SCTX_DEQ_MASK;
} else {
deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
}
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Successful Set TR Deq Ptr cmd, deq = @%08llx", deq);
if (xhci_trb_virt_to_dma(ep->queued_deq_seg,
ep->queued_deq_ptr) == deq) {
/* Update the ring's dequeue segment and dequeue pointer
* to reflect the new position.
*/
update_ring_for_set_deq_completion(xhci, dev,
ep_ring, ep_index);
} else {
xhci_warn(xhci, "Mismatch between completed Set TR Deq Ptr command & xHCI internal state.\n");
xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
ep->queued_deq_seg, ep->queued_deq_ptr);
}
}
cleanup:
dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING;
dev->eps[ep_index].queued_deq_seg = NULL;
dev->eps[ep_index].queued_deq_ptr = NULL;
/* Restart any rings with pending URBs */
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
union xhci_trb *trb, u32 cmd_comp_code)
{
struct xhci_virt_device *vdev;
struct xhci_ep_ctx *ep_ctx;
unsigned int ep_index;
ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
vdev = xhci->devs[slot_id];
ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
trace_xhci_handle_cmd_reset_ep(ep_ctx);
/* This command will only fail if the endpoint wasn't halted,
* but we don't care.
*/
xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
"Ignoring reset ep completion code of %u", cmd_comp_code);
/* HW with the reset endpoint quirk needs to have a configure endpoint
* command complete before the endpoint can be used. Queue that here
* because the HW can't handle two commands being queued in a row.
*/
if (xhci->quirks & XHCI_RESET_EP_QUIRK) {
struct xhci_command *command;
command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
if (!command)
return;
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Queueing configure endpoint command");
xhci_queue_configure_endpoint(xhci, command,
xhci->devs[slot_id]->in_ctx->dma, slot_id,
false);
xhci_ring_cmd_db(xhci);
} else {
/* Clear our internal halted state */
xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
}
}
static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id,
struct xhci_command *command, u32 cmd_comp_code)
{
if (cmd_comp_code == COMP_SUCCESS)
command->slot_id = slot_id;
else
command->slot_id = 0;
}
static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id)
{
struct xhci_virt_device *virt_dev;
struct xhci_slot_ctx *slot_ctx;
virt_dev = xhci->devs[slot_id];
if (!virt_dev)
return;
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
trace_xhci_handle_cmd_disable_slot(slot_ctx);
if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
/* Delete default control endpoint resources */
xhci_free_device_endpoint_resources(xhci, virt_dev, true);
xhci_free_virt_device(xhci, slot_id);
}
static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
struct xhci_event_cmd *event, u32 cmd_comp_code)
{
struct xhci_virt_device *virt_dev;
struct xhci_input_control_ctx *ctrl_ctx;
struct xhci_ep_ctx *ep_ctx;
unsigned int ep_index;
unsigned int ep_state;
u32 add_flags, drop_flags;
/*
* Configure endpoint commands can come from the USB core
* configuration or alt setting changes, or because the HW
* needed an extra configure endpoint command after a reset
* endpoint command or streams were being configured.
* If the command was for a halted endpoint, the xHCI driver
* is not waiting on the configure endpoint command.
*/
virt_dev = xhci->devs[slot_id];
ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
if (!ctrl_ctx) {
xhci_warn(xhci, "Could not get input context, bad type.\n");
return;
}
add_flags = le32_to_cpu(ctrl_ctx->add_flags);
drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
/* Input ctx add_flags are the endpoint index plus one */
ep_index = xhci_last_valid_endpoint(add_flags) - 1;
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, ep_index);
trace_xhci_handle_cmd_config_ep(ep_ctx);
/* A usb_set_interface() call directly after clearing a halted
* condition may race on this quirky hardware. Not worth
* worrying about, since this is prototype hardware. Not sure
* if this will work for streams, but streams support was
* untested on this prototype.
*/
if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
ep_index != (unsigned int) -1 &&
add_flags - SLOT_FLAG == drop_flags) {
ep_state = virt_dev->eps[ep_index].ep_state;
if (!(ep_state & EP_HALTED))
return;
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"Completed config ep cmd - "
"last ep index = %d, state = %d",
ep_index, ep_state);
/* Clear internal halted state and restart ring(s) */
virt_dev->eps[ep_index].ep_state &= ~EP_HALTED;
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
return;
}
return;
}
static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id)
{
struct xhci_virt_device *vdev;
struct xhci_slot_ctx *slot_ctx;
vdev = xhci->devs[slot_id];
slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
trace_xhci_handle_cmd_addr_dev(slot_ctx);
}
static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id,
struct xhci_event_cmd *event)
{
struct xhci_virt_device *vdev;
struct xhci_slot_ctx *slot_ctx;
vdev = xhci->devs[slot_id];
slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
trace_xhci_handle_cmd_reset_dev(slot_ctx);
xhci_dbg(xhci, "Completed reset device command.\n");
if (!xhci->devs[slot_id])
xhci_warn(xhci, "Reset device command completion "
"for disabled slot %u\n", slot_id);
}
static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci,
struct xhci_event_cmd *event)
{
if (!(xhci->quirks & XHCI_NEC_HOST)) {
xhci_warn(xhci, "WARN NEC_GET_FW command on non-NEC host\n");
return;
}
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"NEC firmware version %2x.%02x",
NEC_FW_MAJOR(le32_to_cpu(event->status)),
NEC_FW_MINOR(le32_to_cpu(event->status)));
}
static void xhci_complete_del_and_free_cmd(struct xhci_command *cmd, u32 status)
{
list_del(&cmd->cmd_list);
if (cmd->completion) {
cmd->status = status;
complete(cmd->completion);
} else {
kfree(cmd);
}
}
void xhci_cleanup_command_queue(struct xhci_hcd *xhci)
{
struct xhci_command *cur_cmd, *tmp_cmd;
list_for_each_entry_safe(cur_cmd, tmp_cmd, &xhci->cmd_list, cmd_list)
xhci_complete_del_and_free_cmd(cur_cmd, COMP_COMMAND_ABORTED);
}
void xhci_handle_command_timeout(struct work_struct *work)
{
struct xhci_hcd *xhci;
unsigned long flags;
u64 hw_ring_state;
xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer);
spin_lock_irqsave(&xhci->lock, flags);
/*
* If timeout work is pending, or current_cmd is NULL, it means we
* raced with command completion. Command is handled so just return.
*/
if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) {
spin_unlock_irqrestore(&xhci->lock, flags);
return;
}
/* mark this command to be cancelled */
xhci->current_cmd->status = COMP_COMMAND_ABORTED;
/* Make sure command ring is running before aborting it */
hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
if (hw_ring_state == ~(u64)0) {
xhci_hc_died(xhci);
goto time_out_completed;
}
if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
(hw_ring_state & CMD_RING_RUNNING)) {
/* Prevent new doorbell, and start command abort */
xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
xhci_dbg(xhci, "Command timeout\n");
xhci_abort_cmd_ring(xhci, flags);
goto time_out_completed;
}
/* host removed. Bail out */
if (xhci->xhc_state & XHCI_STATE_REMOVING) {
xhci_dbg(xhci, "host removed, ring start fail?\n");
xhci_cleanup_command_queue(xhci);
goto time_out_completed;
}
/* command timeout on stopped ring, ring can't be aborted */
xhci_dbg(xhci, "Command timeout on stopped ring\n");
xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
time_out_completed:
spin_unlock_irqrestore(&xhci->lock, flags);
return;
}
static void handle_cmd_completion(struct xhci_hcd *xhci,
struct xhci_event_cmd *event)
{
int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
u64 cmd_dma;
dma_addr_t cmd_dequeue_dma;
u32 cmd_comp_code;
union xhci_trb *cmd_trb;
struct xhci_command *cmd;
u32 cmd_type;
cmd_dma = le64_to_cpu(event->cmd_trb);
cmd_trb = xhci->cmd_ring->dequeue;
trace_xhci_handle_command(xhci->cmd_ring, &cmd_trb->generic);
cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
cmd_trb);
/*
* Check whether the completion event is for our internal kept
* command.
*/
if (!cmd_dequeue_dma || cmd_dma != (u64)cmd_dequeue_dma) {
xhci_warn(xhci,
"ERROR mismatched command completion event\n");
return;
}
cmd = list_first_entry(&xhci->cmd_list, struct xhci_command, cmd_list);
cancel_delayed_work(&xhci->cmd_timer);
cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status));
/* If CMD ring stopped we own the trbs between enqueue and dequeue */
if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) {
complete_all(&xhci->cmd_ring_stop_completion);
return;
}
if (cmd->command_trb != xhci->cmd_ring->dequeue) {
xhci_err(xhci,
"Command completion event does not match command\n");
return;
}
/*
* Host aborted the command ring, check if the current command was
* supposed to be aborted, otherwise continue normally.
* The command ring is stopped now, but the xHC will issue a Command
* Ring Stopped event which will cause us to restart it.
*/
if (cmd_comp_code == COMP_COMMAND_ABORTED) {
xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
if (cmd->status == COMP_COMMAND_ABORTED) {
if (xhci->current_cmd == cmd)
xhci->current_cmd = NULL;
goto event_handled;
}
}
cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
switch (cmd_type) {
case TRB_ENABLE_SLOT:
xhci_handle_cmd_enable_slot(xhci, slot_id, cmd, cmd_comp_code);
break;
case TRB_DISABLE_SLOT:
xhci_handle_cmd_disable_slot(xhci, slot_id);
break;
case TRB_CONFIG_EP:
if (!cmd->completion)
xhci_handle_cmd_config_ep(xhci, slot_id, event,
cmd_comp_code);
break;
case TRB_EVAL_CONTEXT:
break;
case TRB_ADDR_DEV:
xhci_handle_cmd_addr_dev(xhci, slot_id);
break;
case TRB_STOP_RING:
WARN_ON(slot_id != TRB_TO_SLOT_ID(
le32_to_cpu(cmd_trb->generic.field[3])));
xhci_handle_cmd_stop_ep(xhci, slot_id, cmd_trb, event);
break;
case TRB_SET_DEQ:
WARN_ON(slot_id != TRB_TO_SLOT_ID(
le32_to_cpu(cmd_trb->generic.field[3])));
xhci_handle_cmd_set_deq(xhci, slot_id, cmd_trb, cmd_comp_code);
break;
case TRB_CMD_NOOP:
/* Is this an aborted command turned to NO-OP? */
if (cmd->status == COMP_COMMAND_RING_STOPPED)
cmd_comp_code = COMP_COMMAND_RING_STOPPED;
break;
case TRB_RESET_EP:
WARN_ON(slot_id != TRB_TO_SLOT_ID(
le32_to_cpu(cmd_trb->generic.field[3])));
xhci_handle_cmd_reset_ep(xhci, slot_id, cmd_trb, cmd_comp_code);
break;
case TRB_RESET_DEV:
/* SLOT_ID field in reset device cmd completion event TRB is 0.
* Use the SLOT_ID from the command TRB instead (xhci 4.6.11)
*/
slot_id = TRB_TO_SLOT_ID(
le32_to_cpu(cmd_trb->generic.field[3]));
xhci_handle_cmd_reset_dev(xhci, slot_id, event);
break;
case TRB_NEC_GET_FW:
xhci_handle_cmd_nec_get_fw(xhci, event);
break;
default:
/* Skip over unknown commands on the event ring */
xhci_info(xhci, "INFO unknown command type %d\n", cmd_type);
break;
}
/* restart timer if this wasn't the last command */
if (!list_is_singular(&xhci->cmd_list)) {
xhci->current_cmd = list_first_entry(&cmd->cmd_list,
struct xhci_command, cmd_list);
xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
} else if (xhci->current_cmd == cmd) {
xhci->current_cmd = NULL;
}
event_handled:
xhci_complete_del_and_free_cmd(cmd, cmd_comp_code);
inc_deq(xhci, xhci->cmd_ring);
}
static void handle_vendor_event(struct xhci_hcd *xhci,
union xhci_trb *event)
{
u32 trb_type;
trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->generic.field[3]));
xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
handle_cmd_completion(xhci, &event->event_cmd);
}
/* @port_id: the one-based port ID from the hardware (indexed from array of all
* port registers -- USB 3.0 and USB 2.0).
*
* Returns a zero-based port number, which is suitable for indexing into each of
* the split roothubs' port arrays and bus state arrays.
* Add one to it in order to call xhci_find_slot_id_by_port.
*/
static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
struct xhci_hcd *xhci, u32 port_id)
{
unsigned int i;
unsigned int num_similar_speed_ports = 0;
/* port_id from the hardware is 1-based, but port_array[], usb3_ports[],
* and usb2_ports are 0-based indexes. Count the number of similar
* speed ports, up to 1 port before this port.
*/
for (i = 0; i < (port_id - 1); i++) {
u8 port_speed = xhci->port_array[i];
/*
* Skip ports that don't have known speeds, or have duplicate
* Extended Capabilities port speed entries.
*/
if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
continue;
/*
* USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and
* 1.1 ports are under the USB 2.0 hub. If the port speed
* matches the device speed, it's a similar speed port.
*/
if ((port_speed == 0x03) == (hcd->speed >= HCD_USB3))
num_similar_speed_ports++;
}
return num_similar_speed_ports;
}
static void handle_device_notification(struct xhci_hcd *xhci,
union xhci_trb *event)
{
u32 slot_id;
struct usb_device *udev;
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->generic.field[3]));
if (!xhci->devs[slot_id]) {
xhci_warn(xhci, "Device Notification event for "
"unused slot %u\n", slot_id);
return;
}
xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
slot_id);
udev = xhci->devs[slot_id]->udev;
if (udev && udev->parent)
usb_wakeup_notification(udev->parent, udev->portnum);
}
static void handle_port_status(struct xhci_hcd *xhci,
union xhci_trb *event)
{
struct usb_hcd *hcd;
u32 port_id;
u32 temp, temp1;
int max_ports;
int slot_id;
unsigned int faked_port_index;
u8 major_revision;
struct xhci_bus_state *bus_state;
__le32 __iomem **port_array;
bool bogus_port_status = false;
/* Port status change events always have a successful completion code */
if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS)
xhci_warn(xhci,
"WARN: xHC returned failed port status event\n");
port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0]));
xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id);
max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
if ((port_id <= 0) || (port_id > max_ports)) {
xhci_warn(xhci, "Invalid port id %d\n", port_id);
inc_deq(xhci, xhci->event_ring);
return;
}
/* Figure out which usb_hcd this port is attached to:
* is it a USB 3.0 port or a USB 2.0/1.1 port?
*/
major_revision = xhci->port_array[port_id - 1];
/* Find the right roothub. */
hcd = xhci_to_hcd(xhci);
if ((major_revision == 0x03) != (hcd->speed >= HCD_USB3))
hcd = xhci->shared_hcd;
if (major_revision == 0) {
xhci_warn(xhci, "Event for port %u not in "
"Extended Capabilities, ignoring.\n",
port_id);
bogus_port_status = true;
goto cleanup;
}
if (major_revision == DUPLICATE_ENTRY) {
xhci_warn(xhci, "Event for port %u duplicated in"
"Extended Capabilities, ignoring.\n",
port_id);
bogus_port_status = true;
goto cleanup;
}
/*
* Hardware port IDs reported by a Port Status Change Event include USB
* 3.0 and USB 2.0 ports. We want to check if the port has reported a
* resume event, but we first need to translate the hardware port ID
* into the index into the ports on the correct split roothub, and the
* correct bus_state structure.
*/
bus_state = &xhci->bus_state[hcd_index(hcd)];
if (hcd->speed >= HCD_USB3)
port_array = xhci->usb3_ports;
else
port_array = xhci->usb2_ports;
/* Find the faked port hub number */
faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci,
port_id);
temp = readl(port_array[faked_port_index]);
if (hcd->state == HC_STATE_SUSPENDED) {
xhci_dbg(xhci, "resume root hub\n");
usb_hcd_resume_root_hub(hcd);
}
if (hcd->speed >= HCD_USB3 && (temp & PORT_PLS_MASK) == XDEV_INACTIVE)
bus_state->port_remote_wakeup &= ~(1 << faked_port_index);
if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_RESUME) {
xhci_dbg(xhci, "port resume event for port %d\n", port_id);
temp1 = readl(&xhci->op_regs->command);
if (!(temp1 & CMD_RUN)) {
xhci_warn(xhci, "xHC is not running.\n");
goto cleanup;
}
if (DEV_SUPERSPEED_ANY(temp)) {
xhci_dbg(xhci, "remote wake SS port %d\n", port_id);
/* Set a flag to say the port signaled remote wakeup,
* so we can tell the difference between the end of
* device and host initiated resume.
*/
bus_state->port_remote_wakeup |= 1 << faked_port_index;
xhci_test_and_clear_bit(xhci, port_array,
faked_port_index, PORT_PLC);
xhci_set_link_state(xhci, port_array, faked_port_index,
XDEV_U0);
/* Need to wait until the next link state change
* indicates the device is actually in U0.
*/
bogus_port_status = true;
goto cleanup;
} else if (!test_bit(faked_port_index,
&bus_state->resuming_ports)) {
xhci_dbg(xhci, "resume HS port %d\n", port_id);
bus_state->resume_done[faked_port_index] = jiffies +
msecs_to_jiffies(USB_RESUME_TIMEOUT);
set_bit(faked_port_index, &bus_state->resuming_ports);
mod_timer(&hcd->rh_timer,
bus_state->resume_done[faked_port_index]);
/* Do the rest in GetPortStatus */
}
}
if ((temp & PORT_PLC) && (temp & PORT_PLS_MASK) == XDEV_U0 &&
DEV_SUPERSPEED_ANY(temp)) {
xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
/* We've just brought the device into U0 through either the
* Resume state after a device remote wakeup, or through the
* U3Exit state after a host-initiated resume. If it's a device
* initiated remote wake, don't pass up the link state change,
* so the roothub behavior is consistent with external
* USB 3.0 hub behavior.
*/
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
faked_port_index + 1);
if (slot_id && xhci->devs[slot_id])
xhci_ring_device(xhci, slot_id);
if (bus_state->port_remote_wakeup & (1 << faked_port_index)) {
bus_state->port_remote_wakeup &=
~(1 << faked_port_index);
xhci_test_and_clear_bit(xhci, port_array,
faked_port_index, PORT_PLC);
usb_wakeup_notification(hcd->self.root_hub,
faked_port_index + 1);
bogus_port_status = true;
goto cleanup;
}
}
/*
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
* RExit to a disconnect state). If so, let the the driver know it's
* out of the RExit state.
*/
if (!DEV_SUPERSPEED_ANY(temp) &&
test_and_clear_bit(faked_port_index,
&bus_state->rexit_ports)) {
complete(&bus_state->rexit_done[faked_port_index]);
bogus_port_status = true;
goto cleanup;
}
if (hcd->speed < HCD_USB3)
xhci_test_and_clear_bit(xhci, port_array, faked_port_index,
PORT_PLC);
cleanup:
/* Update event ring dequeue pointer before dropping the lock */
inc_deq(xhci, xhci->event_ring);
/* Don't make the USB core poll the roothub if we got a bad port status
* change event. Besides, at that point we can't tell which roothub
* (USB 2.0 or USB 3.0) to kick.
*/
if (bogus_port_status)
return;
/*
* xHCI port-status-change events occur when the "or" of all the
* status-change bits in the portsc register changes from 0 to 1.
* New status changes won't cause an event if any other change
* bits are still set. When an event occurs, switch over to
* polling to avoid losing status changes.
*/
xhci_dbg(xhci, "%s: starting port polling.\n", __func__);
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
spin_unlock(&xhci->lock);
/* Pass this up to the core */
usb_hcd_poll_rh_status(hcd);
spin_lock(&xhci->lock);
}
/*
* This TD is defined by the TRBs starting at start_trb in start_seg and ending
* at end_trb, which may be in another segment. If the suspect DMA address is a
* TRB in this TD, this function returns that TRB's segment. Otherwise it
* returns 0.
*/
struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
struct xhci_segment *start_seg,
union xhci_trb *start_trb,
union xhci_trb *end_trb,
dma_addr_t suspect_dma,
bool debug)
{
dma_addr_t start_dma;
dma_addr_t end_seg_dma;
dma_addr_t end_trb_dma;
struct xhci_segment *cur_seg;
start_dma = xhci_trb_virt_to_dma(start_seg, start_trb);
cur_seg = start_seg;
do {
if (start_dma == 0)
return NULL;
/* We may get an event for a Link TRB in the middle of a TD */
end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
&cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
/* If the end TRB isn't in this segment, this is set to 0 */
end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
if (debug)
xhci_warn(xhci,
"Looking for event-dma %016llx trb-start %016llx trb-end %016llx seg-start %016llx seg-end %016llx\n",
(unsigned long long)suspect_dma,
(unsigned long long)start_dma,
(unsigned long long)end_trb_dma,
(unsigned long long)cur_seg->dma,
(unsigned long long)end_seg_dma);
if (end_trb_dma > 0) {
/* The end TRB is in this segment, so suspect should be here */
if (start_dma <= end_trb_dma) {
if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
return cur_seg;
} else {
/* Case for one segment with
* a TD wrapped around to the top
*/
if ((suspect_dma >= start_dma &&
suspect_dma <= end_seg_dma) ||
(suspect_dma >= cur_seg->dma &&
suspect_dma <= end_trb_dma))
return cur_seg;
}
return NULL;
} else {
/* Might still be somewhere in this segment */
if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
return cur_seg;
}
cur_seg = cur_seg->next;
start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
} while (cur_seg != start_seg);
return NULL;
}
static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
unsigned int stream_id,
struct xhci_td *td, union xhci_trb *ep_trb)
{
struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
struct xhci_command *command;
command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
if (!command)
return;
ep->ep_state |= EP_HALTED;
ep->stopped_stream = stream_id;
xhci_queue_reset_ep(xhci, command, slot_id, ep_index);
xhci_cleanup_stalled_ring(xhci, ep_index, td);
ep->stopped_stream = 0;
xhci_ring_cmd_db(xhci);
}
/* Check if an error has halted the endpoint ring. The class driver will
* cleanup the halt for a non-default control endpoint if we indicate a stall.
* However, a babble and other errors also halt the endpoint ring, and the class
* driver won't clear the halt in that case, so we need to issue a Set Transfer
* Ring Dequeue Pointer command manually.
*/
static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
struct xhci_ep_ctx *ep_ctx,
unsigned int trb_comp_code)
{
/* TRB completion codes that may require a manual halt cleanup */
if (trb_comp_code == COMP_USB_TRANSACTION_ERROR ||
trb_comp_code == COMP_BABBLE_DETECTED_ERROR ||
trb_comp_code == COMP_SPLIT_TRANSACTION_ERROR)
/* The 0.95 spec says a babbling control endpoint
* is not halted. The 0.96 spec says it is. Some HW
* claims to be 0.95 compliant, but it halts the control
* endpoint anyway. Check if a babble halted the
* endpoint.
*/
if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_HALTED)
return 1;
return 0;
}
int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
{
if (trb_comp_code >= 224 && trb_comp_code <= 255) {
/* Vendor defined "informational" completion code,
* treat as not-an-error.
*/
xhci_dbg(xhci, "Vendor defined info completion code %u\n",
trb_comp_code);
xhci_dbg(xhci, "Treating code as success.\n");
return 1;
}
return 0;
}
static int xhci_td_cleanup(struct xhci_hcd *xhci, struct xhci_td *td,
struct xhci_ring *ep_ring, int *status)
{
struct urb_priv *urb_priv;
struct urb *urb = NULL;
/* Clean up the endpoint's TD list */
urb = td->urb;
urb_priv = urb->hcpriv;
/* if a bounce buffer was used to align this td then unmap it */
xhci_unmap_td_bounce_buffer(xhci, ep_ring, td);
/* Do one last check of the actual transfer length.
* If the host controller said we transferred more data than the buffer
* length, urb->actual_length will be a very big number (since it's
* unsigned). Play it safe and say we didn't transfer anything.
*/
if (urb->actual_length > urb->transfer_buffer_length) {
xhci_warn(xhci, "URB req %u and actual %u transfer length mismatch\n",
urb->transfer_buffer_length, urb->actual_length);
urb->actual_length = 0;
*status = 0;
}
list_del_init(&td->td_list);
/* Was this TD slated to be cancelled but completed anyway? */
if (!list_empty(&td->cancelled_td_list))
list_del_init(&td->cancelled_td_list);
inc_td_cnt(urb);
/* Giveback the urb when all the tds are completed */
if (last_td_in_urb(td)) {
if ((urb->actual_length != urb->transfer_buffer_length &&
(urb->transfer_flags & URB_SHORT_NOT_OK)) ||
(*status != 0 && !usb_endpoint_xfer_isoc(&urb->ep->desc)))
xhci_dbg(xhci, "Giveback URB %p, len = %d, expected = %d, status = %d\n",
urb, urb->actual_length,
urb->transfer_buffer_length, *status);
/* set isoc urb status to 0 just as EHCI, UHCI, and OHCI */
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
*status = 0;
xhci_giveback_urb_in_irq(xhci, td, *status);
}
return 0;
}
static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
union xhci_trb *ep_trb, struct xhci_transfer_event *event,
struct xhci_virt_ep *ep, int *status, bool skip)
{
struct xhci_virt_device *xdev;
struct xhci_ep_ctx *ep_ctx;
struct xhci_ring *ep_ring;
unsigned int slot_id;
u32 trb_comp_code;
int ep_index;
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
xdev = xhci->devs[slot_id];
ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
if (skip)
goto td_cleanup;
if (trb_comp_code == COMP_STOPPED_LENGTH_INVALID ||
trb_comp_code == COMP_STOPPED ||
trb_comp_code == COMP_STOPPED_SHORT_PACKET) {
/* The Endpoint Stop Command completion will take care of any
* stopped TDs. A stopped TD may be restarted, so don't update
* the ring dequeue pointer or take this TD off any lists yet.
*/
ep->stopped_td = td;
return 0;
}
if (trb_comp_code == COMP_STALL_ERROR ||
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
trb_comp_code)) {
/* Issue a reset endpoint command to clear the host side
* halt, followed by a set dequeue command to move the
* dequeue pointer past the TD.
* The class driver clears the device side halt later.
*/
xhci_cleanup_halted_endpoint(xhci, slot_id, ep_index,
ep_ring->stream_id, td, ep_trb);
} else {
/* Update ring dequeue pointer */
while (ep_ring->dequeue != td->last_trb)
inc_deq(xhci, ep_ring);
inc_deq(xhci, ep_ring);
}
td_cleanup:
return xhci_td_cleanup(xhci, td, ep_ring, status);
}
/* sum trb lengths from ring dequeue up to stop_trb, _excluding_ stop_trb */
static int sum_trb_lengths(struct xhci_hcd *xhci, struct xhci_ring *ring,
union xhci_trb *stop_trb)
{
u32 sum;
union xhci_trb *trb = ring->dequeue;
struct xhci_segment *seg = ring->deq_seg;
for (sum = 0; trb != stop_trb; next_trb(xhci, ring, &seg, &trb)) {
if (!trb_is_noop(trb) && !trb_is_link(trb))
sum += TRB_LEN(le32_to_cpu(trb->generic.field[2]));
}
return sum;
}
/*
* Process control tds, update urb status and actual_length.
*/
static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
union xhci_trb *ep_trb, struct xhci_transfer_event *event,
struct xhci_virt_ep *ep, int *status)
{
struct xhci_virt_device *xdev;
struct xhci_ring *ep_ring;
unsigned int slot_id;
int ep_index;
struct xhci_ep_ctx *ep_ctx;
u32 trb_comp_code;
u32 remaining, requested;
u32 trb_type;
trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(ep_trb->generic.field[3]));
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
xdev = xhci->devs[slot_id];
ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
requested = td->urb->transfer_buffer_length;
remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
switch (trb_comp_code) {
case COMP_SUCCESS:
if (trb_type != TRB_STATUS) {
xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n",
(trb_type == TRB_DATA) ? "data" : "setup");
*status = -ESHUTDOWN;
break;
}
*status = 0;
break;
case COMP_SHORT_PACKET:
*status = 0;
break;
case COMP_STOPPED_SHORT_PACKET:
if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
td->urb->actual_length = remaining;
else
xhci_warn(xhci, "WARN: Stopped Short Packet on ctrl setup or status TRB\n");
goto finish_td;
case COMP_STOPPED:
switch (trb_type) {
case TRB_SETUP:
td->urb->actual_length = 0;
goto finish_td;
case TRB_DATA:
case TRB_NORMAL:
td->urb->actual_length = requested - remaining;
goto finish_td;
case TRB_STATUS:
td->urb->actual_length = requested;
goto finish_td;
default:
xhci_warn(xhci, "WARN: unexpected TRB Type %d\n",
trb_type);
goto finish_td;
}
case COMP_STOPPED_LENGTH_INVALID:
goto finish_td;
default:
if (!xhci_requires_manual_halt_cleanup(xhci,
ep_ctx, trb_comp_code))
break;
xhci_dbg(xhci, "TRB error %u, halted endpoint index = %u\n",
trb_comp_code, ep_index);
/* else fall through */
case COMP_STALL_ERROR:
/* Did we transfer part of the data (middle) phase? */
if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
td->urb->actual_length = requested - remaining;
else if (!td->urb_length_set)
td->urb->actual_length = 0;
goto finish_td;
}
/* stopped at setup stage, no data transferred */
if (trb_type == TRB_SETUP)
goto finish_td;
/*
* if on data stage then update the actual_length of the URB and flag it
* as set, so it won't be overwritten in the event for the last TRB.
*/
if (trb_type == TRB_DATA ||
trb_type == TRB_NORMAL) {
td->urb_length_set = true;
td->urb->actual_length = requested - remaining;
xhci_dbg(xhci, "Waiting for status stage event\n");
return 0;
}
/* at status stage */
if (!td->urb_length_set)
td->urb->actual_length = requested;
finish_td:
return finish_td(xhci, td, ep_trb, event, ep, status, false);
}
/*
* Process isochronous tds, update urb packet status and actual_length.
*/
static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
union xhci_trb *ep_trb, struct xhci_transfer_event *event,
struct xhci_virt_ep *ep, int *status)
{
struct xhci_ring *ep_ring;
struct urb_priv *urb_priv;
int idx;
struct usb_iso_packet_descriptor *frame;
u32 trb_comp_code;
bool sum_trbs_for_length = false;
u32 remaining, requested, ep_trb_len;
int short_framestatus;
ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
urb_priv = td->urb->hcpriv;
idx = urb_priv->num_tds_done;
frame = &td->urb->iso_frame_desc[idx];
requested = frame->length;
remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
short_framestatus = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
-EREMOTEIO : 0;
/* handle completion code */
switch (trb_comp_code) {
case COMP_SUCCESS:
if (remaining) {
frame->status = short_framestatus;
if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
sum_trbs_for_length = true;
break;
}
frame->status = 0;
break;
case COMP_SHORT_PACKET:
frame->status = short_framestatus;
sum_trbs_for_length = true;
break;
case COMP_BANDWIDTH_OVERRUN_ERROR:
frame->status = -ECOMM;
break;
case COMP_ISOCH_BUFFER_OVERRUN:
case COMP_BABBLE_DETECTED_ERROR:
frame->status = -EOVERFLOW;
break;
case COMP_INCOMPATIBLE_DEVICE_ERROR:
case COMP_STALL_ERROR:
frame->status = -EPROTO;
break;
case COMP_USB_TRANSACTION_ERROR:
frame->status = -EPROTO;
if (ep_trb != td->last_trb)
return 0;
break;
case COMP_STOPPED:
sum_trbs_for_length = true;
break;
case COMP_STOPPED_SHORT_PACKET:
/* field normally containing residue now contains tranferred */
frame->status = short_framestatus;
requested = remaining;
break;
case COMP_STOPPED_LENGTH_INVALID:
requested = 0;
remaining = 0;
break;
default:
sum_trbs_for_length = true;
frame->status = -1;
break;
}
if (sum_trbs_for_length)
frame->actual_length = sum_trb_lengths(xhci, ep_ring, ep_trb) +
ep_trb_len - remaining;
else
frame->actual_length = requested;
td->urb->actual_length += frame->actual_length;
return finish_td(xhci, td, ep_trb, event, ep, status, false);
}
static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
struct xhci_transfer_event *event,
struct xhci_virt_ep *ep, int *status)
{
struct xhci_ring *ep_ring;
struct urb_priv *urb_priv;
struct usb_iso_packet_descriptor *frame;
int idx;
ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
urb_priv = td->urb->hcpriv;
idx = urb_priv->num_tds_done;
frame = &td->urb->iso_frame_desc[idx];
/* The transfer is partly done. */
frame->status = -EXDEV;
/* calc actual length */
frame->actual_length = 0;
/* Update ring dequeue pointer */
while (ep_ring->dequeue != td->last_trb)
inc_deq(xhci, ep_ring);
inc_deq(xhci, ep_ring);
return finish_td(xhci, td, NULL, event, ep, status, true);
}
/*
* Process bulk and interrupt tds, update urb status and actual_length.
*/
static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
union xhci_trb *ep_trb, struct xhci_transfer_event *event,
struct xhci_virt_ep *ep, int *status)
{
struct xhci_ring *ep_ring;
u32 trb_comp_code;
u32 remaining, requested, ep_trb_len;
ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
requested = td->urb->transfer_buffer_length;
switch (trb_comp_code) {
case COMP_SUCCESS:
/* handle success with untransferred data as short packet */
if (ep_trb != td->last_trb || remaining) {
xhci_warn(xhci, "WARN Successful completion on short TX\n");
xhci_dbg(xhci, "ep %#x - asked for %d bytes, %d bytes untransferred\n",
td->urb->ep->desc.bEndpointAddress,
requested, remaining);
}
*status = 0;
break;
case COMP_SHORT_PACKET:
xhci_dbg(xhci, "ep %#x - asked for %d bytes, %d bytes untransferred\n",
td->urb->ep->desc.bEndpointAddress,
requested, remaining);
*status = 0;
break;
case COMP_STOPPED_SHORT_PACKET:
td->urb->actual_length = remaining;
goto finish_td;
case COMP_STOPPED_LENGTH_INVALID:
/* stopped on ep trb with invalid length, exclude it */
ep_trb_len = 0;
remaining = 0;
break;
default:
/* do nothing */
break;
}
if (ep_trb == td->last_trb)
td->urb->actual_length = requested - remaining;
else
td->urb->actual_length =
sum_trb_lengths(xhci, ep_ring, ep_trb) +
ep_trb_len - remaining;
finish_td:
if (remaining > requested) {
xhci_warn(xhci, "bad transfer trb length %d in event trb\n",
remaining);
td->urb->actual_length = 0;
}
return finish_td(xhci, td, ep_trb, event, ep, status, false);
}
/*
* If this function returns an error condition, it means it got a Transfer
* event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
* At this point, the host controller is probably hosed and should be reset.
*/
static int handle_tx_event(struct xhci_hcd *xhci,
struct xhci_transfer_event *event)
{
struct xhci_virt_device *xdev;
struct xhci_virt_ep *ep;
struct xhci_ring *ep_ring;
unsigned int slot_id;
int ep_index;
struct xhci_td *td = NULL;
dma_addr_t ep_trb_dma;
struct xhci_segment *ep_seg;
union xhci_trb *ep_trb;
int status = -EINPROGRESS;
struct xhci_ep_ctx *ep_ctx;
struct list_head *tmp;
u32 trb_comp_code;
int td_num = 0;
bool handling_skipped_tds = false;
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
xdev = xhci->devs[slot_id];
if (!xdev) {
xhci_err(xhci, "ERROR Transfer event pointed to bad slot %u\n",
slot_id);
xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
(unsigned long long) xhci_trb_virt_to_dma(
xhci->event_ring->deq_seg,
xhci->event_ring->dequeue),
lower_32_bits(le64_to_cpu(event->buffer)),
upper_32_bits(le64_to_cpu(event->buffer)),
le32_to_cpu(event->transfer_len),
le32_to_cpu(event->flags));
return -ENODEV;
}
/* Endpoint ID is 1 based, our index is zero based */
ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
ep = &xdev->eps[ep_index];
ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
if (!ep_ring || GET_EP_CTX_STATE(ep_ctx) == EP_STATE_DISABLED) {
xhci_err(xhci,
"ERROR Transfer event for disabled endpoint slot %u ep %u or incorrect stream ring\n",
slot_id, ep_index);
xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
(unsigned long long) xhci_trb_virt_to_dma(
xhci->event_ring->deq_seg,
xhci->event_ring->dequeue),
lower_32_bits(le64_to_cpu(event->buffer)),
upper_32_bits(le64_to_cpu(event->buffer)),
le32_to_cpu(event->transfer_len),
le32_to_cpu(event->flags));
return -ENODEV;
}
/* Count current td numbers if ep->skip is set */
if (ep->skip) {
list_for_each(tmp, &ep_ring->td_list)
td_num++;
}
ep_trb_dma = le64_to_cpu(event->buffer);
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
/* Look for common error cases */
switch (trb_comp_code) {
/* Skip codes that require special handling depending on
* transfer type
*/
case COMP_SUCCESS:
if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
break;
if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
trb_comp_code = COMP_SHORT_PACKET;
else
xhci_warn_ratelimited(xhci,
"WARN Successful completion on short TX for slot %u ep %u: needs XHCI_TRUST_TX_LENGTH quirk?\n",
slot_id, ep_index);
case COMP_SHORT_PACKET:
break;
case COMP_STOPPED:
xhci_dbg(xhci, "Stopped on Transfer TRB for slot %u ep %u\n",
slot_id, ep_index);
break;
case COMP_STOPPED_LENGTH_INVALID:
xhci_dbg(xhci,
"Stopped on No-op or Link TRB for slot %u ep %u\n",
slot_id, ep_index);
break;
case COMP_STOPPED_SHORT_PACKET:
xhci_dbg(xhci,
"Stopped with short packet transfer detected for slot %u ep %u\n",
slot_id, ep_index);
break;
case COMP_STALL_ERROR:
xhci_dbg(xhci, "Stalled endpoint for slot %u ep %u\n", slot_id,
ep_index);
ep->ep_state |= EP_HALTED;
status = -EPIPE;
break;
case COMP_TRB_ERROR:
xhci_warn(xhci,
"WARN: TRB error for slot %u ep %u on endpoint\n",
slot_id, ep_index);
status = -EILSEQ;
break;
case COMP_SPLIT_TRANSACTION_ERROR:
case COMP_USB_TRANSACTION_ERROR:
xhci_dbg(xhci, "Transfer error for slot %u ep %u on endpoint\n",
slot_id, ep_index);
status = -EPROTO;
break;
case COMP_BABBLE_DETECTED_ERROR:
xhci_dbg(xhci, "Babble error for slot %u ep %u on endpoint\n",
slot_id, ep_index);
status = -EOVERFLOW;
break;
case COMP_DATA_BUFFER_ERROR:
xhci_warn(xhci,
"WARN: HC couldn't access mem fast enough for slot %u ep %u\n",
slot_id, ep_index);
status = -ENOSR;
break;
case COMP_BANDWIDTH_OVERRUN_ERROR:
xhci_warn(xhci,
"WARN: bandwidth overrun event for slot %u ep %u on endpoint\n",
slot_id, ep_index);
break;
case COMP_ISOCH_BUFFER_OVERRUN:
xhci_warn(xhci,
"WARN: buffer overrun event for slot %u ep %u on endpoint",
slot_id, ep_index);
break;
case COMP_RING_UNDERRUN:
/*
* When the Isoch ring is empty, the xHC will generate
* a Ring Overrun Event for IN Isoch endpoint or Ring
* Underrun Event for OUT Isoch endpoint.
*/
xhci_dbg(xhci, "underrun event on endpoint\n");
if (!list_empty(&ep_ring->td_list))
xhci_dbg(xhci, "Underrun Event for slot %d ep %d "
"still with TDs queued?\n",
TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
ep_index);
goto cleanup;
case COMP_RING_OVERRUN:
xhci_dbg(xhci, "overrun event on endpoint\n");
if (!list_empty(&ep_ring->td_list))
xhci_dbg(xhci, "Overrun Event for slot %d ep %d "
"still with TDs queued?\n",
TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
ep_index);
goto cleanup;
case COMP_INCOMPATIBLE_DEVICE_ERROR:
xhci_warn(xhci,
"WARN: detect an incompatible device for slot %u ep %u",
slot_id, ep_index);
status = -EPROTO;
break;
case COMP_MISSED_SERVICE_ERROR:
/*
* When encounter missed service error, one or more isoc tds
* may be missed by xHC.
* Set skip flag of the ep_ring; Complete the missed tds as
* short transfer when process the ep_ring next time.
*/
ep->skip = true;
xhci_dbg(xhci,
"Miss service interval error for slot %u ep %u, set skip flag\n",
slot_id, ep_index);
goto cleanup;
case COMP_NO_PING_RESPONSE_ERROR:
ep->skip = true;
xhci_dbg(xhci,
"No Ping response error for slot %u ep %u, Skip one Isoc TD\n",
slot_id, ep_index);
goto cleanup;
default:
if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
status = 0;
break;
}
xhci_warn(xhci,
"ERROR Unknown event condition %u for slot %u ep %u , HC probably busted\n",
trb_comp_code, slot_id, ep_index);
goto cleanup;
}
do {
/* This TRB should be in the TD at the head of this ring's
* TD list.
*/
if (list_empty(&ep_ring->td_list)) {
/*
* A stopped endpoint may generate an extra completion
* event if the device was suspended. Don't print
* warnings.
*/
if (!(trb_comp_code == COMP_STOPPED ||
trb_comp_code == COMP_STOPPED_LENGTH_INVALID)) {
xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
ep_index);
}
if (ep->skip) {
ep->skip = false;
xhci_dbg(xhci, "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\n",
slot_id, ep_index);
}
goto cleanup;
}
/* We've skipped all the TDs on the ep ring when ep->skip set */
if (ep->skip && td_num == 0) {
ep->skip = false;
xhci_dbg(xhci, "All tds on the ep_ring skipped. Clear skip flag for slot %u ep %u.\n",
slot_id, ep_index);
goto cleanup;
}
td = list_first_entry(&ep_ring->td_list, struct xhci_td,
td_list);
if (ep->skip)
td_num--;
/* Is this a TRB in the currently executing TD? */
ep_seg = trb_in_td(xhci, ep_ring->deq_seg, ep_ring->dequeue,
td->last_trb, ep_trb_dma, false);
/*
* Skip the Force Stopped Event. The event_trb(event_dma) of FSE
* is not in the current TD pointed by ep_ring->dequeue because
* that the hardware dequeue pointer still at the previous TRB
* of the current TD. The previous TRB maybe a Link TD or the
* last TRB of the previous TD. The command completion handle
* will take care the rest.
*/
if (!ep_seg && (trb_comp_code == COMP_STOPPED ||
trb_comp_code == COMP_STOPPED_LENGTH_INVALID)) {
goto cleanup;
}
if (!ep_seg) {
if (!ep->skip ||
!usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
/* Some host controllers give a spurious
* successful event after a short transfer.
* Ignore it.
*/
if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
ep_ring->last_td_was_short) {
ep_ring->last_td_was_short = false;
goto cleanup;
}
/* HC is busted, give up! */
xhci_err(xhci,
"ERROR Transfer event TRB DMA ptr not "
"part of current TD ep_index %d "
"comp_code %u\n", ep_index,
trb_comp_code);
trb_in_td(xhci, ep_ring->deq_seg,
ep_ring->dequeue, td->last_trb,
ep_trb_dma, true);
return -ESHUTDOWN;
}
skip_isoc_td(xhci, td, event, ep, &status);
goto cleanup;
}
if (trb_comp_code == COMP_SHORT_PACKET)
ep_ring->last_td_was_short = true;
else
ep_ring->last_td_was_short = false;
if (ep->skip) {
xhci_dbg(xhci,
"Found td. Clear skip flag for slot %u ep %u.\n",
slot_id, ep_index);
ep->skip = false;
}
ep_trb = &ep_seg->trbs[(ep_trb_dma - ep_seg->dma) /
sizeof(*ep_trb)];
trace_xhci_handle_transfer(ep_ring,
(struct xhci_generic_trb *) ep_trb);
/*
* No-op TRB should not trigger interrupts.
* If ep_trb is a no-op TRB, it means the
* corresponding TD has been cancelled. Just ignore
* the TD.
*/
if (trb_is_noop(ep_trb)) {
xhci_dbg(xhci,
"ep_trb is a no-op TRB. Skip it for slot %u ep %u\n",
slot_id, ep_index);
goto cleanup;
}
/* update the urb's actual_length and give back to the core */
if (usb_endpoint_xfer_control(&td->urb->ep->desc))
process_ctrl_td(xhci, td, ep_trb, event, ep, &status);
else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
process_isoc_td(xhci, td, ep_trb, event, ep, &status);
else
process_bulk_intr_td(xhci, td, ep_trb, event, ep,
&status);
cleanup:
handling_skipped_tds = ep->skip &&
trb_comp_code != COMP_MISSED_SERVICE_ERROR &&
trb_comp_code != COMP_NO_PING_RESPONSE_ERROR;
/*
* Do not update event ring dequeue pointer if we're in a loop
* processing missed tds.
*/
if (!handling_skipped_tds)
inc_deq(xhci, xhci->event_ring);
/*
* If ep->skip is set, it means there are missed tds on the
* endpoint ring need to take care of.
* Process them as short transfer until reach the td pointed by
* the event.
*/
} while (handling_skipped_tds);
return 0;
}
/*
* This function handles all OS-owned events on the event ring. It may drop
* xhci->lock between event processing (e.g. to pass up port status changes).
* Returns >0 for "possibly more events to process" (caller should call again),
* otherwise 0 if done. In future, <0 returns should indicate error code.
*/
static int xhci_handle_event(struct xhci_hcd *xhci)
{
union xhci_trb *event;
int update_ptrs = 1;
int ret;
/* Event ring hasn't been allocated yet. */
if (!xhci->event_ring || !xhci->event_ring->dequeue) {
xhci_err(xhci, "ERROR event ring not ready\n");
return -ENOMEM;
}
event = xhci->event_ring->dequeue;
/* Does the HC or OS own the TRB? */
if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
xhci->event_ring->cycle_state)
return 0;
trace_xhci_handle_event(xhci->event_ring, &event->generic);
/*
* Barrier between reading the TRB_CYCLE (valid) flag above and any
* speculative reads of the event's flags/data below.
*/
rmb();
/* FIXME: Handle more event types. */
switch (le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK) {
case TRB_TYPE(TRB_COMPLETION):
handle_cmd_completion(xhci, &event->event_cmd);
break;
case TRB_TYPE(TRB_PORT_STATUS):
handle_port_status(xhci, event);
update_ptrs = 0;
break;
case TRB_TYPE(TRB_TRANSFER):
ret = handle_tx_event(xhci, &event->trans_event);
if (ret >= 0)
update_ptrs = 0;
break;
case TRB_TYPE(TRB_DEV_NOTE):
handle_device_notification(xhci, event);
break;
default:
if ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK) >=
TRB_TYPE(48))
handle_vendor_event(xhci, event);
else
xhci_warn(xhci, "ERROR unknown event type %d\n",
TRB_FIELD_TO_TYPE(
le32_to_cpu(event->event_cmd.flags)));
}
/* Any of the above functions may drop and re-acquire the lock, so check
* to make sure a watchdog timer didn't mark the host as non-responsive.
*/
if (xhci->xhc_state & XHCI_STATE_DYING) {
xhci_dbg(xhci, "xHCI host dying, returning from "
"event handler.\n");
return 0;
}
if (update_ptrs)
/* Update SW event ring dequeue pointer */
inc_deq(xhci, xhci->event_ring);
/* Are there more items on the event ring? Caller will call us again to
* check.
*/
return 1;
}
/*
* xHCI spec says we can get an interrupt, and if the HC has an error condition,
* we might get bad data out of the event ring. Section 4.10.2.7 has a list of
* indicators of an event TRB error, but we check the status *first* to be safe.
*/
irqreturn_t xhci_irq(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
union xhci_trb *event_ring_deq;
irqreturn_t ret = IRQ_NONE;
unsigned long flags;
dma_addr_t deq;
u64 temp_64;
u32 status;
spin_lock_irqsave(&xhci->lock, flags);
/* Check if the xHC generated the interrupt, or the irq is shared */
status = readl(&xhci->op_regs->status);
if (status == ~(u32)0) {
xhci_hc_died(xhci);
ret = IRQ_HANDLED;
goto out;
}
if (!(status & STS_EINT))
goto out;
if (status & STS_FATAL) {
xhci_warn(xhci, "WARNING: Host System Error\n");
xhci_halt(xhci);
ret = IRQ_HANDLED;
goto out;
}
/*
* Clear the op reg interrupt status first,
* so we can receive interrupts from other MSI-X interrupters.
* Write 1 to clear the interrupt status.
*/
status |= STS_EINT;
writel(status, &xhci->op_regs->status);
if (!hcd->msi_enabled) {
u32 irq_pending;
irq_pending = readl(&xhci->ir_set->irq_pending);
irq_pending |= IMAN_IP;
writel(irq_pending, &xhci->ir_set->irq_pending);
}
if (xhci->xhc_state & XHCI_STATE_DYING ||
xhci->xhc_state & XHCI_STATE_HALTED) {
xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
"Shouldn't IRQs be disabled?\n");
/* Clear the event handler busy flag (RW1C);
* the event ring should be empty.
*/
temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
xhci_write_64(xhci, temp_64 | ERST_EHB,
&xhci->ir_set->erst_dequeue);
ret = IRQ_HANDLED;
goto out;
}
event_ring_deq = xhci->event_ring->dequeue;
/* FIXME this should be a delayed service routine
* that clears the EHB.
*/
while (xhci_handle_event(xhci) > 0) {}
temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
/* If necessary, update the HW's version of the event ring deq ptr. */
if (event_ring_deq != xhci->event_ring->dequeue) {
deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
xhci->event_ring->dequeue);
if (deq == 0)
xhci_warn(xhci, "WARN something wrong with SW event "
"ring dequeue ptr.\n");
/* Update HC event ring dequeue pointer */
temp_64 &= ERST_PTR_MASK;
temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK);
}
/* Clear the event handler busy flag (RW1C); event ring is empty. */
temp_64 |= ERST_EHB;
xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
ret = IRQ_HANDLED;
out:
spin_unlock_irqrestore(&xhci->lock, flags);
return ret;
}
irqreturn_t xhci_msi_irq(int irq, void *hcd)
{
return xhci_irq(hcd);
}
/**** Endpoint Ring Operations ****/
/*
* Generic function for queueing a TRB on a ring.
* The caller must have checked to make sure there's room on the ring.
*
* @more_trbs_coming: Will you enqueue more TRBs before calling
* prepare_transfer()?
*/
static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
bool more_trbs_coming,
u32 field1, u32 field2, u32 field3, u32 field4)
{
struct xhci_generic_trb *trb;
trb = &ring->enqueue->generic;
trb->field[0] = cpu_to_le32(field1);
trb->field[1] = cpu_to_le32(field2);
trb->field[2] = cpu_to_le32(field3);
trb->field[3] = cpu_to_le32(field4);
trace_xhci_queue_trb(ring, trb);
inc_enq(xhci, ring, more_trbs_coming);
}
/*
* Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
* FIXME allocate segments if the ring is full.
*/
static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
{
unsigned int num_trbs_needed;
/* Make sure the endpoint has been added to xHC schedule */
switch (ep_state) {
case EP_STATE_DISABLED:
/*
* USB core changed config/interfaces without notifying us,
* or hardware is reporting the wrong state.
*/
xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
return -ENOENT;
case EP_STATE_ERROR:
xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
/* FIXME event handling code for error needs to clear it */
/* XXX not sure if this should be -ENOENT or not */
return -EINVAL;
case EP_STATE_HALTED:
xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
case EP_STATE_STOPPED:
case EP_STATE_RUNNING:
break;
default:
xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
/*
* FIXME issue Configure Endpoint command to try to get the HC
* back into a known state.
*/
return -EINVAL;
}
while (1) {
if (room_on_ring(xhci, ep_ring, num_trbs))
break;
if (ep_ring == xhci->cmd_ring) {
xhci_err(xhci, "Do not support expand command ring\n");
return -ENOMEM;
}
xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion,
"ERROR no room on ep ring, try ring expansion");
num_trbs_needed = num_trbs - ep_ring->num_trbs_free;
if (xhci_ring_expansion(xhci, ep_ring, num_trbs_needed,
mem_flags)) {
xhci_err(xhci, "Ring expansion failed\n");
return -ENOMEM;
}
}
while (trb_is_link(ep_ring->enqueue)) {
/* If we're not dealing with 0.95 hardware or isoc rings
* on AMD 0.96 host, clear the chain bit.
*/
if (!xhci_link_trb_quirk(xhci) &&
!(ep_ring->type == TYPE_ISOC &&
(xhci->quirks & XHCI_AMD_0x96_HOST)))
ep_ring->enqueue->link.control &=
cpu_to_le32(~TRB_CHAIN);
else
ep_ring->enqueue->link.control |=
cpu_to_le32(TRB_CHAIN);
wmb();
ep_ring->enqueue->link.control ^= cpu_to_le32(TRB_CYCLE);
/* Toggle the cycle bit after the last ring segment. */
if (link_trb_toggles_cycle(ep_ring->enqueue))
ep_ring->cycle_state ^= 1;
ep_ring->enq_seg = ep_ring->enq_seg->next;
ep_ring->enqueue = ep_ring->enq_seg->trbs;
}
return 0;
}
static int prepare_transfer(struct xhci_hcd *xhci,
struct xhci_virt_device *xdev,
unsigned int ep_index,
unsigned int stream_id,
unsigned int num_trbs,
struct urb *urb,
unsigned int td_index,
gfp_t mem_flags)
{
int ret;
struct urb_priv *urb_priv;
struct xhci_td *td;
struct xhci_ring *ep_ring;
struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
ep_ring = xhci_stream_id_to_ring(xdev, ep_index, stream_id);
if (!ep_ring) {
xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n",
stream_id);
return -EINVAL;
}
ret = prepare_ring(xhci, ep_ring, GET_EP_CTX_STATE(ep_ctx),
num_trbs, mem_flags);
if (ret)
return ret;
urb_priv = urb->hcpriv;
td = &urb_priv->td[td_index];
INIT_LIST_HEAD(&td->td_list);
INIT_LIST_HEAD(&td->cancelled_td_list);
if (td_index == 0) {
ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb);
if (unlikely(ret))
return ret;
}
td->urb = urb;
/* Add this TD to the tail of the endpoint ring's TD list */
list_add_tail(&td->td_list, &ep_ring->td_list);
td->start_seg = ep_ring->enq_seg;
td->first_trb = ep_ring->enqueue;
return 0;
}
static unsigned int count_trbs(u64 addr, u64 len)
{
unsigned int num_trbs;
num_trbs = DIV_ROUND_UP(len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
TRB_MAX_BUFF_SIZE);
if (num_trbs == 0)
num_trbs++;
return num_trbs;
}
static inline unsigned int count_trbs_needed(struct urb *urb)
{
return count_trbs(urb->transfer_dma, urb->transfer_buffer_length);
}
static unsigned int count_sg_trbs_needed(struct urb *urb)
{
struct scatterlist *sg;
unsigned int i, len, full_len, num_trbs = 0;
full_len = urb->transfer_buffer_length;
for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
len = sg_dma_len(sg);
num_trbs += count_trbs(sg_dma_address(sg), len);
len = min_t(unsigned int, len, full_len);
full_len -= len;
if (full_len == 0)
break;
}
return num_trbs;
}
static unsigned int count_isoc_trbs_needed(struct urb *urb, int i)
{
u64 addr, len;
addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
len = urb->iso_frame_desc[i].length;
return count_trbs(addr, len);
}
static void check_trb_math(struct urb *urb, int running_total)
{
if (unlikely(running_total != urb->transfer_buffer_length))
dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
"queued %#x (%d), asked for %#x (%d)\n",
__func__,
urb->ep->desc.bEndpointAddress,
running_total, running_total,
urb->transfer_buffer_length,
urb->transfer_buffer_length);
}
static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
unsigned int ep_index, unsigned int stream_id, int start_cycle,
struct xhci_generic_trb *start_trb)
{
/*
* Pass all the TRBs to the hardware at once and make sure this write
* isn't reordered.
*/
wmb();
if (start_cycle)
start_trb->field[3] |= cpu_to_le32(start_cycle);
else
start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
}
static void check_interval(struct xhci_hcd *xhci, struct urb *urb,
struct xhci_ep_ctx *ep_ctx)
{
int xhci_interval;
int ep_interval;
xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
ep_interval = urb->interval;
/* Convert to microframes */
if (urb->dev->speed == USB_SPEED_LOW ||
urb->dev->speed == USB_SPEED_FULL)
ep_interval *= 8;
/* FIXME change this to a warning and a suggestion to use the new API
* to set the polling interval (once the API is added).
*/
if (xhci_interval != ep_interval) {
dev_dbg_ratelimited(&urb->dev->dev,
"Driver uses different interval (%d microframe%s) than xHCI (%d microframe%s)\n",
ep_interval, ep_interval == 1 ? "" : "s",
xhci_interval, xhci_interval == 1 ? "" : "s");
urb->interval = xhci_interval;
/* Convert back to frames for LS/FS devices */
if (urb->dev->speed == USB_SPEED_LOW ||
urb->dev->speed == USB_SPEED_FULL)
urb->interval /= 8;
}
}
/*
* xHCI uses normal TRBs for both bulk and interrupt. When the interrupt
* endpoint is to be serviced, the xHC will consume (at most) one TD. A TD
* (comprised of sg list entries) can take several service intervals to
* transmit.
*/
int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index)
{
struct xhci_ep_ctx *ep_ctx;
ep_ctx = xhci_get_ep_ctx(xhci, xhci->devs[slot_id]->out_ctx, ep_index);
check_interval(xhci, urb, ep_ctx);
return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
}
/*
* For xHCI 1.0 host controllers, TD size is the number of max packet sized
* packets remaining in the TD (*not* including this TRB).
*
* Total TD packet count = total_packet_count =
* DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
*
* Packets transferred up to and including this TRB = packets_transferred =
* rounddown(total bytes transferred including this TRB / wMaxPacketSize)
*
* TD size = total_packet_count - packets_transferred
*
* For xHCI 0.96 and older, TD size field should be the remaining bytes
* including this TRB, right shifted by 10
*
* For all hosts it must fit in bits 21:17, so it can't be bigger than 31.
* This is taken care of in the TRB_TD_SIZE() macro
*
* The last TRB in a TD must have the TD size set to zero.
*/
static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred,
int trb_buff_len, unsigned int td_total_len,
struct urb *urb, bool more_trbs_coming)
{
u32 maxp, total_packet_count;
/* MTK xHCI is mostly 0.97 but contains some features from 1.0 */
if (xhci->hci_version < 0x100 && !(xhci->quirks & XHCI_MTK_HOST))
return ((td_total_len - transferred) >> 10);
/* One TRB with a zero-length data packet. */
if (!more_trbs_coming || (transferred == 0 && trb_buff_len == 0) ||
trb_buff_len == td_total_len)
return 0;
/* for MTK xHCI, TD size doesn't include this TRB */
if (xhci->quirks & XHCI_MTK_HOST)
trb_buff_len = 0;
maxp = usb_endpoint_maxp(&urb->ep->desc);
total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
/* Queueing functions don't count the current TRB into transferred */
return (total_packet_count - ((transferred + trb_buff_len) / maxp));
}
static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
u32 *trb_buff_len, struct xhci_segment *seg)
{
struct device *dev = xhci_to_hcd(xhci)->self.controller;
unsigned int unalign;
unsigned int max_pkt;
u32 new_buff_len;
max_pkt = usb_endpoint_maxp(&urb->ep->desc);
unalign = (enqd_len + *trb_buff_len) % max_pkt;
/* we got lucky, last normal TRB data on segment is packet aligned */
if (unalign == 0)
return 0;
xhci_dbg(xhci, "Unaligned %d bytes, buff len %d\n",
unalign, *trb_buff_len);
/* is the last nornal TRB alignable by splitting it */
if (*trb_buff_len > unalign) {
*trb_buff_len -= unalign;
xhci_dbg(xhci, "split align, new buff len %d\n", *trb_buff_len);
return 0;
}
/*
* We want enqd_len + trb_buff_len to sum up to a number aligned to
* number which is divisible by the endpoint's wMaxPacketSize. IOW:
* (size of currently enqueued TRBs + remainder) % wMaxPacketSize == 0.
*/
new_buff_len = max_pkt - (enqd_len % max_pkt);
if (new_buff_len > (urb->transfer_buffer_length - enqd_len))
new_buff_len = (urb->transfer_buffer_length - enqd_len);
/* create a max max_pkt sized bounce buffer pointed to by last trb */
if (usb_urb_dir_out(urb)) {
sg_pcopy_to_buffer(urb->sg, urb->num_mapped_sgs,
seg->bounce_buf, new_buff_len, enqd_len);
seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
max_pkt, DMA_TO_DEVICE);
} else {
seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
max_pkt, DMA_FROM_DEVICE);
}
if (dma_mapping_error(dev, seg->bounce_dma)) {
/* try without aligning. Some host controllers survive */
xhci_warn(xhci, "Failed mapping bounce buffer, not aligning\n");
return 0;
}
*trb_buff_len = new_buff_len;
seg->bounce_len = new_buff_len;
seg->bounce_offs = enqd_len;
xhci_dbg(xhci, "Bounce align, new buff len %d\n", *trb_buff_len);
return 1;
}
/* This is very similar to what ehci-q.c qtd_fill() does */
int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index)
{
struct xhci_ring *ring;
struct urb_priv *urb_priv;
struct xhci_td *td;
struct xhci_generic_trb *start_trb;
struct scatterlist *sg = NULL;
bool more_trbs_coming = true;
bool need_zero_pkt = false;
bool first_trb = true;
unsigned int num_trbs;
unsigned int start_cycle, num_sgs = 0;
unsigned int enqd_len, block_len, trb_buff_len, full_len;
int sent_len, ret;
u32 field, length_field, remainder;
u64 addr, send_addr;
ring = xhci_urb_to_transfer_ring(xhci, urb);
if (!ring)
return -EINVAL;
full_len = urb->transfer_buffer_length;
/* If we have scatter/gather list, we use it. */
if (urb->num_sgs) {
num_sgs = urb->num_mapped_sgs;
sg = urb->sg;
addr = (u64) sg_dma_address(sg);
block_len = sg_dma_len(sg);
num_trbs = count_sg_trbs_needed(urb);
} else {
num_trbs = count_trbs_needed(urb);
addr = (u64) urb->transfer_dma;
block_len = full_len;
}
ret = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
num_trbs, urb, 0, mem_flags);
if (unlikely(ret < 0))
return ret;
urb_priv = urb->hcpriv;
/* Deal with URB_ZERO_PACKET - need one more td/trb */
if (urb->transfer_flags & URB_ZERO_PACKET && urb_priv->num_tds > 1)
need_zero_pkt = true;
td = &urb_priv->td[0];
/*
* Don't give the first TRB to the hardware (by toggling the cycle bit)
* until we've finished creating all the other TRBs. The ring's cycle
* state may change as we enqueue the other TRBs, so save it too.
*/
start_trb = &ring->enqueue->generic;
start_cycle = ring->cycle_state;
send_addr = addr;
/* Queue the TRBs, even if they are zero-length */
for (enqd_len = 0; first_trb || enqd_len < full_len;
enqd_len += trb_buff_len) {
field = TRB_TYPE(TRB_NORMAL);
/* TRB buffer should not cross 64KB boundaries */
trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
trb_buff_len = min_t(unsigned int, trb_buff_len, block_len);
if (enqd_len + trb_buff_len > full_len)
trb_buff_len = full_len - enqd_len;
/* Don't change the cycle bit of the first TRB until later */
if (first_trb) {
first_trb = false;
if (start_cycle == 0)
field |= TRB_CYCLE;
} else
field |= ring->cycle_state;
/* Chain all the TRBs together; clear the chain bit in the last
* TRB to indicate it's the last TRB in the chain.
*/
if (enqd_len + trb_buff_len < full_len) {
field |= TRB_CHAIN;
if (trb_is_link(ring->enqueue + 1)) {
if (xhci_align_td(xhci, urb, enqd_len,
&trb_buff_len,
ring->enq_seg)) {
send_addr = ring->enq_seg->bounce_dma;
/* assuming TD won't span 2 segs */
td->bounce_seg = ring->enq_seg;
}
}
}
if (enqd_len + trb_buff_len >= full_len) {
field &= ~TRB_CHAIN;
field |= TRB_IOC;
more_trbs_coming = false;
td->last_trb = ring->enqueue;
}
/* Only set interrupt on short packet for IN endpoints */
if (usb_urb_dir_in(urb))
field |= TRB_ISP;
/* Set the TRB length, TD size, and interrupter fields. */
remainder = xhci_td_remainder(xhci, enqd_len, trb_buff_len,
full_len, urb, more_trbs_coming);
length_field = TRB_LEN(trb_buff_len) |
TRB_TD_SIZE(remainder) |
TRB_INTR_TARGET(0);
queue_trb(xhci, ring, more_trbs_coming | need_zero_pkt,
lower_32_bits(send_addr),
upper_32_bits(send_addr),
length_field,
field);
addr += trb_buff_len;
sent_len = trb_buff_len;
while (sg && sent_len >= block_len) {
/* New sg entry */
--num_sgs;
sent_len -= block_len;
if (num_sgs != 0) {
sg = sg_next(sg);
block_len = sg_dma_len(sg);
addr = (u64) sg_dma_address(sg);
addr += sent_len;
}
}
block_len -= sent_len;
send_addr = addr;
}
if (need_zero_pkt) {
ret = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
1, urb, 1, mem_flags);
urb_priv->td[1].last_trb = ring->enqueue;
field = TRB_TYPE(TRB_NORMAL) | ring->cycle_state | TRB_IOC;
queue_trb(xhci, ring, 0, 0, 0, TRB_INTR_TARGET(0), field);
}
check_trb_math(urb, enqd_len);
giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
start_cycle, start_trb);
return 0;
}
/* Caller must have locked xhci->lock */
int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index)
{
struct xhci_ring *ep_ring;
int num_trbs;
int ret;
struct usb_ctrlrequest *setup;
struct xhci_generic_trb *start_trb;
int start_cycle;
u32 field;
struct urb_priv *urb_priv;
struct xhci_td *td;
ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
if (!ep_ring)
return -EINVAL;
/*
* Need to copy setup packet into setup TRB, so we can't use the setup
* DMA address.
*/
if (!urb->setup_packet)
return -EINVAL;
/* 1 TRB for setup, 1 for status */
num_trbs = 2;
/*
* Don't need to check if we need additional event data and normal TRBs,
* since data in control transfers will never get bigger than 16MB
* XXX: can we get a buffer that crosses 64KB boundaries?
*/
if (urb->transfer_buffer_length > 0)
num_trbs++;
ret = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
num_trbs, urb, 0, mem_flags);
if (ret < 0)
return ret;
urb_priv = urb->hcpriv;
td = &urb_priv->td[0];
/*
* Don't give the first TRB to the hardware (by toggling the cycle bit)
* until we've finished creating all the other TRBs. The ring's cycle
* state may change as we enqueue the other TRBs, so save it too.
*/
start_trb = &ep_ring->enqueue->generic;
start_cycle = ep_ring->cycle_state;
/* Queue setup TRB - see section 6.4.1.2.1 */
/* FIXME better way to translate setup_packet into two u32 fields? */
setup = (struct usb_ctrlrequest *) urb->setup_packet;
field = 0;
field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
if (start_cycle == 0)
field |= 0x1;
/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
if ((xhci->hci_version >= 0x100) || (xhci->quirks & XHCI_MTK_HOST)) {
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_TX_TYPE(TRB_DATA_IN);
else
field |= TRB_TX_TYPE(TRB_DATA_OUT);
}
}
queue_trb(xhci, ep_ring, true,
setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16,
le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16,
TRB_LEN(8) | TRB_INTR_TARGET(0),
/* Immediate data in pointer */
field);
/* If there's data, queue data TRBs */
/* Only set interrupt on short packet for IN endpoints */
if (usb_urb_dir_in(urb))
field = TRB_ISP | TRB_TYPE(TRB_DATA);
else
field = TRB_TYPE(TRB_DATA);
if (urb->transfer_buffer_length > 0) {
u32 length_field, remainder;
remainder = xhci_td_remainder(xhci, 0,
urb->transfer_buffer_length,
urb->transfer_buffer_length,
urb, 1);
length_field = TRB_LEN(urb->transfer_buffer_length) |
TRB_TD_SIZE(remainder) |
TRB_INTR_TARGET(0);
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_DIR_IN;
queue_trb(xhci, ep_ring, true,
lower_32_bits(urb->transfer_dma),
upper_32_bits(urb->transfer_dma),
length_field,
field | ep_ring->cycle_state);
}
/* Save the DMA address of the last TRB in the TD */
td->last_trb = ep_ring->enqueue;
/* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
/* If the device sent data, the status stage is an OUT transfer */
if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
field = 0;
else
field = TRB_DIR_IN;
queue_trb(xhci, ep_ring, false,
0,
0,
TRB_INTR_TARGET(0),
/* Event on completion */
field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
giveback_first_trb(xhci, slot_id, ep_index, 0,
start_cycle, start_trb);
return 0;
}
/*
* The transfer burst count field of the isochronous TRB defines the number of
* bursts that are required to move all packets in this TD. Only SuperSpeed
* devices can burst up to bMaxBurst number of packets per service interval.
* This field is zero based, meaning a value of zero in the field means one
* burst. Basically, for everything but SuperSpeed devices, this field will be
* zero. Only xHCI 1.0 host controllers support this field.
*/
static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci,
struct urb *urb, unsigned int total_packet_count)
{
unsigned int max_burst;
if (xhci->hci_version < 0x100 || urb->dev->speed < USB_SPEED_SUPER)
return 0;
max_burst = urb->ep->ss_ep_comp.bMaxBurst;
return DIV_ROUND_UP(total_packet_count, max_burst + 1) - 1;
}
/*
* Returns the number of packets in the last "burst" of packets. This field is
* valid for all speeds of devices. USB 2.0 devices can only do one "burst", so
* the last burst packet count is equal to the total number of packets in the
* TD. SuperSpeed endpoints can have up to 3 bursts. All but the last burst
* must contain (bMaxBurst + 1) number of packets, but the last burst can
* contain 1 to (bMaxBurst + 1) packets.
*/
static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd *xhci,
struct urb *urb, unsigned int total_packet_count)
{
unsigned int max_burst;
unsigned int residue;
if (xhci->hci_version < 0x100)
return 0;
if (urb->dev->speed >= USB_SPEED_SUPER) {
/* bMaxBurst is zero based: 0 means 1 packet per burst */
max_burst = urb->ep->ss_ep_comp.bMaxBurst;
residue = total_packet_count % (max_burst + 1);
/* If residue is zero, the last burst contains (max_burst + 1)
* number of packets, but the TLBPC field is zero-based.
*/
if (residue == 0)
return max_burst;
return residue - 1;
}
if (total_packet_count == 0)
return 0;
return total_packet_count - 1;
}
/*
* Calculates Frame ID field of the isochronous TRB identifies the
* target frame that the Interval associated with this Isochronous
* Transfer Descriptor will start on. Refer to 4.11.2.5 in 1.1 spec.
*
* Returns actual frame id on success, negative value on error.
*/
static int xhci_get_isoc_frame_id(struct xhci_hcd *xhci,
struct urb *urb, int index)
{
int start_frame, ist, ret = 0;
int start_frame_id, end_frame_id, current_frame_id;
if (urb->dev->speed == USB_SPEED_LOW ||
urb->dev->speed == USB_SPEED_FULL)
start_frame = urb->start_frame + index * urb->interval;
else
start_frame = (urb->start_frame + index * urb->interval) >> 3;
/* Isochronous Scheduling Threshold (IST, bits 0~3 in HCSPARAMS2):
*
* If bit [3] of IST is cleared to '0', software can add a TRB no
* later than IST[2:0] Microframes before that TRB is scheduled to
* be executed.
* If bit [3] of IST is set to '1', software can add a TRB no later
* than IST[2:0] Frames before that TRB is scheduled to be executed.
*/
ist = HCS_IST(xhci->hcs_params2) & 0x7;
if (HCS_IST(xhci->hcs_params2) & (1 << 3))
ist <<= 3;
/* Software shall not schedule an Isoch TD with a Frame ID value that
* is less than the Start Frame ID or greater than the End Frame ID,
* where:
*
* End Frame ID = (Current MFINDEX register value + 895 ms.) MOD 2048
* Start Frame ID = (Current MFINDEX register value + IST + 1) MOD 2048
*
* Both the End Frame ID and Start Frame ID values are calculated
* in microframes. When software determines the valid Frame ID value;
* The End Frame ID value should be rounded down to the nearest Frame
* boundary, and the Start Frame ID value should be rounded up to the
* nearest Frame boundary.
*/
current_frame_id = readl(&xhci->run_regs->microframe_index);
start_frame_id = roundup(current_frame_id + ist + 1, 8);
end_frame_id = rounddown(current_frame_id + 895 * 8, 8);
start_frame &= 0x7ff;
start_frame_id = (start_frame_id >> 3) & 0x7ff;
end_frame_id = (end_frame_id >> 3) & 0x7ff;
xhci_dbg(xhci, "%s: index %d, reg 0x%x start_frame_id 0x%x, end_frame_id 0x%x, start_frame 0x%x\n",
__func__, index, readl(&xhci->run_regs->microframe_index),
start_frame_id, end_frame_id, start_frame);
if (start_frame_id < end_frame_id) {
if (start_frame > end_frame_id ||
start_frame < start_frame_id)
ret = -EINVAL;
} else if (start_frame_id > end_frame_id) {
if ((start_frame > end_frame_id &&
start_frame < start_frame_id))
ret = -EINVAL;
} else {
ret = -EINVAL;
}
if (index == 0) {
if (ret == -EINVAL || start_frame == start_frame_id) {
start_frame = start_frame_id + 1;
if (urb->dev->speed == USB_SPEED_LOW ||
urb->dev->speed == USB_SPEED_FULL)
urb->start_frame = start_frame;
else
urb->start_frame = start_frame << 3;
ret = 0;
}
}
if (ret) {
xhci_warn(xhci, "Frame ID %d (reg %d, index %d) beyond range (%d, %d)\n",
start_frame, current_frame_id, index,
start_frame_id, end_frame_id);
xhci_warn(xhci, "Ignore frame ID field, use SIA bit instead\n");
return ret;
}
return start_frame;
}
/* This is for isoc transfer */
static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index)
{
struct xhci_ring *ep_ring;
struct urb_priv *urb_priv;
struct xhci_td *td;
int num_tds, trbs_per_td;
struct xhci_generic_trb *start_trb;
bool first_trb;
int start_cycle;
u32 field, length_field;
int running_total, trb_buff_len, td_len, td_remain_len, ret;
u64 start_addr, addr;
int i, j;
bool more_trbs_coming;
struct xhci_virt_ep *xep;
int frame_id;
xep = &xhci->devs[slot_id]->eps[ep_index];
ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
num_tds = urb->number_of_packets;
if (num_tds < 1) {
xhci_dbg(xhci, "Isoc URB with zero packets?\n");
return -EINVAL;
}
start_addr = (u64) urb->transfer_dma;
start_trb = &ep_ring->enqueue->generic;
start_cycle = ep_ring->cycle_state;
urb_priv = urb->hcpriv;
/* Queue the TRBs for each TD, even if they are zero-length */
for (i = 0; i < num_tds; i++) {
unsigned int total_pkt_count, max_pkt;
unsigned int burst_count, last_burst_pkt_count;
u32 sia_frame_id;
first_trb = true;
running_total = 0;
addr = start_addr + urb->iso_frame_desc[i].offset;
td_len = urb->iso_frame_desc[i].length;
td_remain_len = td_len;
max_pkt = usb_endpoint_maxp(&urb->ep->desc);
total_pkt_count = DIV_ROUND_UP(td_len, max_pkt);
/* A zero-length transfer still involves at least one packet. */
if (total_pkt_count == 0)
total_pkt_count++;
burst_count = xhci_get_burst_count(xhci, urb, total_pkt_count);
last_burst_pkt_count = xhci_get_last_burst_packet_count(xhci,
urb, total_pkt_count);
trbs_per_td = count_isoc_trbs_needed(urb, i);
ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
urb->stream_id, trbs_per_td, urb, i, mem_flags);
if (ret < 0) {
if (i == 0)
return ret;
goto cleanup;
}
td = &urb_priv->td[i];
/* use SIA as default, if frame id is used overwrite it */
sia_frame_id = TRB_SIA;
if (!(urb->transfer_flags & URB_ISO_ASAP) &&
HCC_CFC(xhci->hcc_params)) {
frame_id = xhci_get_isoc_frame_id(xhci, urb, i);
if (frame_id >= 0)
sia_frame_id = TRB_FRAME_ID(frame_id);
}
/*
* Set isoc specific data for the first TRB in a TD.
* Prevent HW from getting the TRBs by keeping the cycle state
* inverted in the first TDs isoc TRB.
*/
field = TRB_TYPE(TRB_ISOC) |
TRB_TLBPC(last_burst_pkt_count) |
sia_frame_id |
(i ? ep_ring->cycle_state : !start_cycle);
/* xhci 1.1 with ETE uses TD_Size field for TBC, old is Rsvdz */
if (!xep->use_extended_tbc)
field |= TRB_TBC(burst_count);
/* fill the rest of the TRB fields, and remaining normal TRBs */
for (j = 0; j < trbs_per_td; j++) {
u32 remainder = 0;
/* only first TRB is isoc, overwrite otherwise */
if (!first_trb)
field = TRB_TYPE(TRB_NORMAL) |
ep_ring->cycle_state;
/* Only set interrupt on short packet for IN EPs */
if (usb_urb_dir_in(urb))
field |= TRB_ISP;
/* Set the chain bit for all except the last TRB */
if (j < trbs_per_td - 1) {
more_trbs_coming = true;
field |= TRB_CHAIN;
} else {
more_trbs_coming = false;
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
/* set BEI, except for the last TD */
if (xhci->hci_version >= 0x100 &&
!(xhci->quirks & XHCI_AVOID_BEI) &&
i < num_tds - 1)
field |= TRB_BEI;
}
/* Calculate TRB length */
trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
if (trb_buff_len > td_remain_len)
trb_buff_len = td_remain_len;
/* Set the TRB length, TD size, & interrupter fields. */
remainder = xhci_td_remainder(xhci, running_total,
trb_buff_len, td_len,
urb, more_trbs_coming);
length_field = TRB_LEN(trb_buff_len) |
TRB_INTR_TARGET(0);
/* xhci 1.1 with ETE uses TD Size field for TBC */
if (first_trb && xep->use_extended_tbc)
length_field |= TRB_TD_SIZE_TBC(burst_count);
else
length_field |= TRB_TD_SIZE(remainder);
first_trb = false;
queue_trb(xhci, ep_ring, more_trbs_coming,
lower_32_bits(addr),
upper_32_bits(addr),
length_field,
field);
running_total += trb_buff_len;
addr += trb_buff_len;
td_remain_len -= trb_buff_len;
}
/* Check TD length */
if (running_total != td_len) {
xhci_err(xhci, "ISOC TD length unmatch\n");
ret = -EINVAL;
goto cleanup;
}
}
/* store the next frame id */
if (HCC_CFC(xhci->hcc_params))
xep->next_frame_id = urb->start_frame + num_tds * urb->interval;
if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
if (xhci->quirks & XHCI_AMD_PLL_FIX)
usb_amd_quirk_pll_disable();
}
xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++;
giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
start_cycle, start_trb);
return 0;
cleanup:
/* Clean up a partially enqueued isoc transfer. */
for (i--; i >= 0; i--)
list_del_init(&urb_priv->td[i].td_list);
/* Use the first TD as a temporary variable to turn the TDs we've queued
* into No-ops with a software-owned cycle bit. That way the hardware
* won't accidentally start executing bogus TDs when we partially
* overwrite them. td->first_trb and td->start_seg are already set.
*/
urb_priv->td[0].last_trb = ep_ring->enqueue;
/* Every TRB except the first & last will have its cycle bit flipped. */
td_to_noop(xhci, ep_ring, &urb_priv->td[0], true);
/* Reset the ring enqueue back to the first TRB and its cycle bit. */
ep_ring->enqueue = urb_priv->td[0].first_trb;
ep_ring->enq_seg = urb_priv->td[0].start_seg;
ep_ring->cycle_state = start_cycle;
ep_ring->num_trbs_free = ep_ring->num_trbs_free_temp;
usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
return ret;
}
/*
* Check transfer ring to guarantee there is enough room for the urb.
* Update ISO URB start_frame and interval.
* Update interval as xhci_queue_intr_tx does. Use xhci frame_index to
* update urb->start_frame if URB_ISO_ASAP is set in transfer_flags or
* Contiguous Frame ID is not supported by HC.
*/
int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
struct urb *urb, int slot_id, unsigned int ep_index)
{
struct xhci_virt_device *xdev;
struct xhci_ring *ep_ring;
struct xhci_ep_ctx *ep_ctx;
int start_frame;
int num_tds, num_trbs, i;
int ret;
struct xhci_virt_ep *xep;
int ist;
xdev = xhci->devs[slot_id];
xep = &xhci->devs[slot_id]->eps[ep_index];
ep_ring = xdev->eps[ep_index].ring;
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
num_trbs = 0;
num_tds = urb->number_of_packets;
for (i = 0; i < num_tds; i++)
num_trbs += count_isoc_trbs_needed(urb, i);
/* Check the ring to guarantee there is enough room for the whole urb.
* Do not insert any td of the urb to the ring if the check failed.
*/
ret = prepare_ring(xhci, ep_ring, GET_EP_CTX_STATE(ep_ctx),
num_trbs, mem_flags);
if (ret)
return ret;
/*
* Check interval value. This should be done before we start to
* calculate the start frame value.
*/
check_interval(xhci, urb, ep_ctx);
/* Calculate the start frame and put it in urb->start_frame. */
if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) {
if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_RUNNING) {
urb->start_frame = xep->next_frame_id;
goto skip_start_over;
}
}
start_frame = readl(&xhci->run_regs->microframe_index);
start_frame &= 0x3fff;
/*
* Round up to the next frame and consider the time before trb really
* gets scheduled by hardare.
*/
ist = HCS_IST(xhci->hcs_params2) & 0x7;
if (HCS_IST(xhci->hcs_params2) & (1 << 3))
ist <<= 3;
start_frame += ist + XHCI_CFC_DELAY;
start_frame = roundup(start_frame, 8);
/*
* Round up to the next ESIT (Endpoint Service Interval Time) if ESIT
* is greate than 8 microframes.
*/
if (urb->dev->speed == USB_SPEED_LOW ||
urb->dev->speed == USB_SPEED_FULL) {
start_frame = roundup(start_frame, urb->interval << 3);
urb->start_frame = start_frame >> 3;
} else {
start_frame = roundup(start_frame, urb->interval);
urb->start_frame = start_frame;
}
skip_start_over:
ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free;
return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
}
/**** Command Ring Operations ****/
/* Generic function for queueing a command TRB on the command ring.
* Check to make sure there's room on the command ring for one command TRB.
* Also check that there's room reserved for commands that must not fail.
* If this is a command that must not fail, meaning command_must_succeed = TRUE,
* then only check for the number of reserved spots.
* Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
* because the command event handler may want to resubmit a failed command.
*/
static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
u32 field1, u32 field2,
u32 field3, u32 field4, bool command_must_succeed)
{
int reserved_trbs = xhci->cmd_ring_reserved_trbs;
int ret;
if ((xhci->xhc_state & XHCI_STATE_DYING) ||
(xhci->xhc_state & XHCI_STATE_HALTED)) {
xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
return -ESHUTDOWN;
}
if (!command_must_succeed)
reserved_trbs++;
ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
reserved_trbs, GFP_ATOMIC);
if (ret < 0) {
xhci_err(xhci, "ERR: No room for command on command ring\n");
if (command_must_succeed)
xhci_err(xhci, "ERR: Reserved TRB counting for "
"unfailable commands failed.\n");
return ret;
}
cmd->command_trb = xhci->cmd_ring->enqueue;
/* if there are no other commands queued we start the timeout timer */
if (list_empty(&xhci->cmd_list)) {
xhci->current_cmd = cmd;
xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
}
list_add_tail(&cmd->cmd_list, &xhci->cmd_list);
queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
field4 | xhci->cmd_ring->cycle_state);
return 0;
}
/* Queue a slot enable or disable request on the command ring */
int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd,
u32 trb_type, u32 slot_id)
{
return queue_command(xhci, cmd, 0, 0, 0,
TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false);
}
/* Queue an address device command TRB */
int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev setup)
{
return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
upper_32_bits(in_ctx_ptr), 0,
TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)
| (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0), false);
}
int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
u32 field1, u32 field2, u32 field3, u32 field4)
{
return queue_command(xhci, cmd, field1, field2, field3, field4, false);
}
/* Queue a reset device command TRB */
int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
u32 slot_id)
{
return queue_command(xhci, cmd, 0, 0, 0,
TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id),
false);
}
/* Queue a configure endpoint command TRB */
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci,
struct xhci_command *cmd, dma_addr_t in_ctx_ptr,
u32 slot_id, bool command_must_succeed)
{
return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
upper_32_bits(in_ctx_ptr), 0,
TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id),
command_must_succeed);
}
/* Queue an evaluate context command TRB */
int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd,
dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed)
{
return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
upper_32_bits(in_ctx_ptr), 0,
TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
command_must_succeed);
}
/*
* Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
* activity on an endpoint that is about to be suspended.
*/
int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd,
int slot_id, unsigned int ep_index, int suspend)
{
u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
u32 type = TRB_TYPE(TRB_STOP_RING);
u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend);
return queue_command(xhci, cmd, 0, 0, 0,
trb_slot_id | trb_ep_index | type | trb_suspend, false);
}
/* Set Transfer Ring Dequeue Pointer command */
void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
unsigned int stream_id,
struct xhci_dequeue_state *deq_state)
{
dma_addr_t addr;
u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id);
u32 trb_sct = 0;
u32 type = TRB_TYPE(TRB_SET_DEQ);
struct xhci_virt_ep *ep;
struct xhci_command *cmd;
int ret;
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), new deq ptr = %p (0x%llx dma), new cycle = %u",
deq_state->new_deq_seg,
(unsigned long long)deq_state->new_deq_seg->dma,
deq_state->new_deq_ptr,
(unsigned long long)xhci_trb_virt_to_dma(
deq_state->new_deq_seg, deq_state->new_deq_ptr),
deq_state->new_cycle_state);
addr = xhci_trb_virt_to_dma(deq_state->new_deq_seg,
deq_state->new_deq_ptr);
if (addr == 0) {
xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
deq_state->new_deq_seg, deq_state->new_deq_ptr);
return;
}
ep = &xhci->devs[slot_id]->eps[ep_index];
if ((ep->ep_state & SET_DEQ_PENDING)) {
xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
xhci_warn(xhci, "A Set TR Deq Ptr command is pending.\n");
return;
}
/* This function gets called from contexts where it cannot sleep */
cmd = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
if (!cmd)
return;
ep->queued_deq_seg = deq_state->new_deq_seg;
ep->queued_deq_ptr = deq_state->new_deq_ptr;
if (stream_id)
trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
ret = queue_command(xhci, cmd,
lower_32_bits(addr) | trb_sct | deq_state->new_cycle_state,
upper_32_bits(addr), trb_stream_id,
trb_slot_id | trb_ep_index | type, false);
if (ret < 0) {
xhci_free_command(xhci, cmd);
return;
}
/* Stop the TD queueing code from ringing the doorbell until
* this command completes. The HC won't set the dequeue pointer
* if the ring is running, and ringing the doorbell starts the
* ring running.
*/
ep->ep_state |= SET_DEQ_PENDING;
}
int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
int slot_id, unsigned int ep_index)
{
u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
u32 type = TRB_TYPE(TRB_RESET_EP);
return queue_command(xhci, cmd, 0, 0, 0,
trb_slot_id | trb_ep_index | type, false);
}