Revert drm/vc4 hdmi runtime PM changes

This reverts commits

  9984d6664ce9 ("drm/vc4: hdmi: Make sure the controller is powered in detect")
  411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm")

as Michael Stapelberg reports that the new runtime PM changes cause his
Raspberry Pi 3 to hang on boot, probably due to interactions with other
changes in the DRM tree (because a bisect points to the merge in commit
e058a84bfddc: "Merge tag 'drm-next-2021-07-01' of git://.../drm").

Revert these two commits until it's been resolved.

Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/
Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 4a11150..1acf642 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -167,8 +167,6 @@
 	struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
 	bool connected = false;
 
-	WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev));
-
 	if (vc4_hdmi->hpd_gpio &&
 	    gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio)) {
 		connected = true;
@@ -189,12 +187,10 @@
 			}
 		}
 
-		pm_runtime_put(&vc4_hdmi->pdev->dev);
 		return connector_status_connected;
 	}
 
 	cec_phys_addr_invalidate(vc4_hdmi->cec_adap);
-	pm_runtime_put(&vc4_hdmi->pdev->dev);
 	return connector_status_disconnected;
 }
 
@@ -635,6 +631,7 @@
 		vc4_hdmi->variant->phy_disable(vc4_hdmi);
 
 	clk_disable_unprepare(vc4_hdmi->pixel_bvb_clock);
+	clk_disable_unprepare(vc4_hdmi->hsm_clock);
 	clk_disable_unprepare(vc4_hdmi->pixel_clock);
 
 	ret = pm_runtime_put(&vc4_hdmi->pdev->dev);
@@ -947,6 +944,13 @@
 		return;
 	}
 
+	ret = clk_prepare_enable(vc4_hdmi->hsm_clock);
+	if (ret) {
+		DRM_ERROR("Failed to turn on HSM clock: %d\n", ret);
+		clk_disable_unprepare(vc4_hdmi->pixel_clock);
+		return;
+	}
+
 	vc4_hdmi_cec_update_clk_div(vc4_hdmi);
 
 	if (pixel_rate > 297000000)
@@ -959,6 +963,7 @@
 	ret = clk_set_min_rate(vc4_hdmi->pixel_bvb_clock, bvb_rate);
 	if (ret) {
 		DRM_ERROR("Failed to set pixel bvb clock rate: %d\n", ret);
+		clk_disable_unprepare(vc4_hdmi->hsm_clock);
 		clk_disable_unprepare(vc4_hdmi->pixel_clock);
 		return;
 	}
@@ -966,6 +971,7 @@
 	ret = clk_prepare_enable(vc4_hdmi->pixel_bvb_clock);
 	if (ret) {
 		DRM_ERROR("Failed to turn on pixel bvb clock: %d\n", ret);
+		clk_disable_unprepare(vc4_hdmi->hsm_clock);
 		clk_disable_unprepare(vc4_hdmi->pixel_clock);
 		return;
 	}
@@ -2114,29 +2120,6 @@
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int vc4_hdmi_runtime_suspend(struct device *dev)
-{
-	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
-
-	clk_disable_unprepare(vc4_hdmi->hsm_clock);
-
-	return 0;
-}
-
-static int vc4_hdmi_runtime_resume(struct device *dev)
-{
-	struct vc4_hdmi *vc4_hdmi = dev_get_drvdata(dev);
-	int ret;
-
-	ret = clk_prepare_enable(vc4_hdmi->hsm_clock);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-#endif
-
 static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 {
 	const struct vc4_hdmi_variant *variant = of_device_get_match_data(dev);
@@ -2391,18 +2374,11 @@
 	{}
 };
 
-static const struct dev_pm_ops vc4_hdmi_pm_ops = {
-	SET_RUNTIME_PM_OPS(vc4_hdmi_runtime_suspend,
-			   vc4_hdmi_runtime_resume,
-			   NULL)
-};
-
 struct platform_driver vc4_hdmi_driver = {
 	.probe = vc4_hdmi_dev_probe,
 	.remove = vc4_hdmi_dev_remove,
 	.driver = {
 		.name = "vc4_hdmi",
 		.of_match_table = vc4_hdmi_dt_match,
-		.pm = &vc4_hdmi_pm_ops,
 	},
 };