arch/powerpc/platforms/52xx/lite5200_sleep.S - virt/kvm/kvm - Git at Google

 #include <asm/reg.h>
 #include <asm/ppc_asm.h>
 #include <asm/processor.h>
 #include <asm/cache.h>


 #define SDRAM_CTRL	0x104
 #define SC_MODE_EN	(1<<31)
 #define SC_CKE		(1<<30)
 #define SC_REF_EN	(1<<28)
 #define SC_SOFT_PRE	(1<<1)

 #define GPIOW_GPIOE	0xc00
 #define GPIOW_DDR	0xc08
 #define GPIOW_DVO	0xc0c

 #define CDM_CE		0x214
 #define CDM_SDRAM	(1<<3)


 /* helpers... beware: r10 and r4 are overwritten */
 #define SAVE_SPRN(reg, addr)		\
 	mfspr	r10, SPRN_##reg;	\
 	stw	r10, ((addr)*4)(r4);

 #define LOAD_SPRN(reg, addr)		\
 	lwz	r10, ((addr)*4)(r4);	\
 	mtspr	SPRN_##reg, r10;	\
 	sync;				\
 	isync;


 	.data
 registers:
 	.space 0x5c*4
 	.text

 /* ---------------------------------------------------------------------- */
 /* low-power mode with help of M68HLC908QT1 */

 	.globl lite5200_low_power
 lite5200_low_power:

 	mr	r7, r3	/* save SRAM va */
 	mr	r8, r4	/* save MBAR va */

 	/* setup wakeup address for u-boot at physical location 0x0 */
 	lis	r3, CONFIG_KERNEL_START@h
 	lis	r4, lite5200_wakeup@h
 	ori	r4, r4, lite5200_wakeup@l
 	sub	r4, r4, r3
 	stw	r4, 0(r3)


 	/*
 	 * save stuff BDI overwrites
 	 * 0xf0 (0xe0->0x100 gets overwritten when BDI connected;
 	 *   even when CONFIG_BDI* is disabled and MMU XLAT commented; heisenbug?))
 	 * WARNING: self-refresh doesn't seem to work when BDI2000 is connected,
 	 *   possibly because BDI sets SDRAM registers before wakeup code does
 	 */
 	lis	r4, registers@h
 	ori	r4, r4, registers@l
 	lwz	r10, 0xf0(r3)
 	stw	r10, (0x1d*4)(r4)

 	/* save registers to r4 [destroys r10] */
 	SAVE_SPRN(LR, 0x1c)
 	bl	save_regs

 	/* flush caches [destroys r3, r4] */
 	bl	flush_data_cache


 	/* copy code to sram */
 	mr	r4, r7
 	li	r3, (sram_code_end - sram_code)/4
 	mtctr	r3
 	lis	r3, sram_code@h
 	ori	r3, r3, sram_code@l
 1:
 	lwz	r5, 0(r3)
 	stw	r5, 0(r4)
 	addi	r3, r3, 4
 	addi	r4, r4, 4
 	bdnz	1b

 	/* get tb_ticks_per_usec */
 	lis	r3, tb_ticks_per_usec@h
 	lwz	r11, tb_ticks_per_usec@l(r3)

 	/* disable I and D caches */
 	mfspr	r3, SPRN_HID0
 	ori	r3, r3, HID0_ICE | HID0_DCE
 	xori	r3, r3, HID0_ICE | HID0_DCE
 	sync; isync;
 	mtspr	SPRN_HID0, r3
 	sync; isync;

 	/* jump to sram */
 	mtlr	r7
 	blrl
 	/* doesn't return */


 sram_code:
 	/* self refresh */
 	lwz	r4, SDRAM_CTRL(r8)

 	/* send NOP (precharge) */
 	oris	r4, r4, SC_MODE_EN@h	/* mode_en */
 	stw	r4, SDRAM_CTRL(r8)
 	sync

 	ori	r4, r4, SC_SOFT_PRE	/* soft_pre */
 	stw	r4, SDRAM_CTRL(r8)
 	sync
 	xori	r4, r4, SC_SOFT_PRE

 	xoris	r4, r4, SC_MODE_EN@h	/* !mode_en */
 	stw	r4, SDRAM_CTRL(r8)
 	sync

 	/* delay (for NOP to finish) */
 	li	r12, 1
 	bl	udelay

 	/*
 	 * mode_en must not be set when enabling self-refresh
 	 * send AR with CKE low (self-refresh)
 	 */
 	oris	r4, r4, (SC_REF_EN | SC_CKE)@h
 	xoris	r4, r4, (SC_CKE)@h	/* ref_en !cke */
 	stw	r4, SDRAM_CTRL(r8)
 	sync

 	/* delay (after !CKE there should be two cycles) */
 	li	r12, 1
 	bl	udelay

 	/* disable clock */
 	lwz	r4, CDM_CE(r8)
 	ori	r4, r4, CDM_SDRAM
 	xori	r4, r4, CDM_SDRAM
 	stw	r4, CDM_CE(r8)
 	sync

 	/* delay a bit */
 	li	r12, 1
 	bl	udelay


 	/* turn off with QT chip */
 	li	r4, 0x02
 	stb	r4, GPIOW_GPIOE(r8)	/* enable gpio_wkup1 */
 	sync

 	stb	r4, GPIOW_DVO(r8)	/* "output" high */
 	sync
 	stb	r4, GPIOW_DDR(r8)	/* output */
 	sync
 	stb	r4, GPIOW_DVO(r8)	/* output high */
 	sync

 	/* 10uS delay */
 	li	r12, 10
 	bl	udelay

 	/* turn off */
 	li	r4, 0
 	stb	r4, GPIOW_DVO(r8)	/* output low */
 	sync

 	/* wait until we're offline */
   1:
 	b	1b


 	/* local udelay in sram is needed */
   udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
 	mullw	r12, r12, r11
 	mftb	r13	/* start */
 	addi	r12, r13, r12 /* end */
     1:
 	mftb	r13	/* current */
 	cmp	cr0, r13, r12
 	blt	1b
 	blr

 sram_code_end:


 /* uboot jumps here on resume */
 lite5200_wakeup:
 	bl	restore_regs


 	/* HIDs, MSR */
 	LOAD_SPRN(HID1, 0x19)
 	LOAD_SPRN(HID2, 0x1a)


 	/* address translation is tricky (see turn_on_mmu) */
 	mfmsr	r10
 	ori	r10, r10, MSR_DR | MSR_IR


 	mtspr	SPRN_SRR1, r10
 	lis	r10, mmu_on@h
 	ori	r10, r10, mmu_on@l
 	mtspr	SPRN_SRR0, r10
 	sync
 	rfi
 mmu_on:
 	/* kernel offset (r4 is still set from restore_registers) */
 	addis	r4, r4, CONFIG_KERNEL_START@h


 	/* restore MSR */
 	lwz	r10, (4*0x1b)(r4)
 	mtmsr	r10
 	sync; isync;

 	/* invalidate caches */
 	mfspr	r10, SPRN_HID0
 	ori	r5, r10, HID0_ICFI | HID0_DCI
 	mtspr	SPRN_HID0, r5	/* invalidate caches */
 	sync; isync;
 	mtspr	SPRN_HID0, r10
 	sync; isync;

 	/* enable caches */
 	lwz	r10, (4*0x18)(r4)
 	mtspr	SPRN_HID0, r10	/* restore (enable caches, DPM) */
 	/* ^ this has to be after address translation set in MSR */
 	sync
 	isync


 	/* restore 0xf0 (BDI2000) */
 	lis	r3, CONFIG_KERNEL_START@h
 	lwz	r10, (0x1d*4)(r4)
 	stw	r10, 0xf0(r3)

 	LOAD_SPRN(LR, 0x1c)


 	blr


 /* ---------------------------------------------------------------------- */
 /* boring code: helpers */

 /* save registers */
 #define SAVE_BAT(n, addr)		\
 	SAVE_SPRN(DBAT##n##L, addr);	\
 	SAVE_SPRN(DBAT##n##U, addr+1);	\
 	SAVE_SPRN(IBAT##n##L, addr+2);	\
 	SAVE_SPRN(IBAT##n##U, addr+3);

 #define SAVE_SR(n, addr)		\
 	mfsr	r10, n;			\
 	stw	r10, ((addr)*4)(r4);

 #define SAVE_4SR(n, addr)	\
 	SAVE_SR(n, addr);	\
 	SAVE_SR(n+1, addr+1);	\
 	SAVE_SR(n+2, addr+2);	\
 	SAVE_SR(n+3, addr+3);

 save_regs:
 	stw	r0, 0(r4)
 	stw	r1, 0x4(r4)
 	stw	r2, 0x8(r4)
 	stmw	r11, 0xc(r4) /* 0xc -> 0x5f, (0x18*4-1) */

 	SAVE_SPRN(HID0, 0x18)
 	SAVE_SPRN(HID1, 0x19)
 	SAVE_SPRN(HID2, 0x1a)
 	mfmsr	r10
 	stw	r10, (4*0x1b)(r4)
 	/*SAVE_SPRN(LR, 0x1c) have to save it before the call */
 	/* 0x1d reserved by 0xf0 */
 	SAVE_SPRN(RPA,   0x1e)
 	SAVE_SPRN(SDR1,  0x1f)

 	/* save MMU regs */
 	SAVE_BAT(0, 0x20)
 	SAVE_BAT(1, 0x24)
 	SAVE_BAT(2, 0x28)
 	SAVE_BAT(3, 0x2c)
 	SAVE_BAT(4, 0x30)
 	SAVE_BAT(5, 0x34)
 	SAVE_BAT(6, 0x38)
 	SAVE_BAT(7, 0x3c)

 	SAVE_4SR(0, 0x40)
 	SAVE_4SR(4, 0x44)
 	SAVE_4SR(8, 0x48)
 	SAVE_4SR(12, 0x4c)

 	SAVE_SPRN(SPRG0, 0x50)
 	SAVE_SPRN(SPRG1, 0x51)
 	SAVE_SPRN(SPRG2, 0x52)
 	SAVE_SPRN(SPRG3, 0x53)
 	SAVE_SPRN(SPRG4, 0x54)
 	SAVE_SPRN(SPRG5, 0x55)
 	SAVE_SPRN(SPRG6, 0x56)
 	SAVE_SPRN(SPRG7, 0x57)

 	SAVE_SPRN(IABR,  0x58)
 	SAVE_SPRN(DABR,  0x59)
 	SAVE_SPRN(TBRL,  0x5a)
 	SAVE_SPRN(TBRU,  0x5b)

 	blr


 /* restore registers */
 #define LOAD_BAT(n, addr)		\
 	LOAD_SPRN(DBAT##n##L, addr);	\
 	LOAD_SPRN(DBAT##n##U, addr+1);	\
 	LOAD_SPRN(IBAT##n##L, addr+2);	\
 	LOAD_SPRN(IBAT##n##U, addr+3);

 #define LOAD_SR(n, addr)		\
 	lwz	r10, ((addr)*4)(r4);	\
 	mtsr	n, r10;

 #define LOAD_4SR(n, addr)	\
 	LOAD_SR(n, addr);	\
 	LOAD_SR(n+1, addr+1);	\
 	LOAD_SR(n+2, addr+2);	\
 	LOAD_SR(n+3, addr+3);

 restore_regs:
 	lis	r4, registers@h
 	ori	r4, r4, registers@l

 	/* MMU is not up yet */
 	subis	r4, r4, CONFIG_KERNEL_START@h

 	lwz	r0, 0(r4)
 	lwz	r1, 0x4(r4)
 	lwz	r2, 0x8(r4)
 	lmw	r11, 0xc(r4)

 	/*
 	 * these are a bit tricky
 	 *
 	 * 0x18 - HID0
 	 * 0x19 - HID1
 	 * 0x1a - HID2
 	 * 0x1b - MSR
 	 * 0x1c - LR
 	 * 0x1d - reserved by 0xf0 (BDI2000)
 	 */
 	LOAD_SPRN(RPA,   0x1e);
 	LOAD_SPRN(SDR1,  0x1f);

 	/* restore MMU regs */
 	LOAD_BAT(0, 0x20)
 	LOAD_BAT(1, 0x24)
 	LOAD_BAT(2, 0x28)
 	LOAD_BAT(3, 0x2c)
 	LOAD_BAT(4, 0x30)
 	LOAD_BAT(5, 0x34)
 	LOAD_BAT(6, 0x38)
 	LOAD_BAT(7, 0x3c)

 	LOAD_4SR(0, 0x40)
 	LOAD_4SR(4, 0x44)
 	LOAD_4SR(8, 0x48)
 	LOAD_4SR(12, 0x4c)

 	/* rest of regs */
 	LOAD_SPRN(SPRG0, 0x50);
 	LOAD_SPRN(SPRG1, 0x51);
 	LOAD_SPRN(SPRG2, 0x52);
 	LOAD_SPRN(SPRG3, 0x53);
 	LOAD_SPRN(SPRG4, 0x54);
 	LOAD_SPRN(SPRG5, 0x55);
 	LOAD_SPRN(SPRG6, 0x56);
 	LOAD_SPRN(SPRG7, 0x57);

 	LOAD_SPRN(IABR,  0x58);
 	LOAD_SPRN(DABR,  0x59);
 	LOAD_SPRN(TBWL,  0x5a);	/* these two have separate R/W regs */
 	LOAD_SPRN(TBWU,  0x5b);

 	blr


 /* cache flushing code. copied from arch/ppc/boot/util.S */
 #define NUM_CACHE_LINES (128*8)

 /*
  * Flush data cache
  * Do this by just reading lots of stuff into the cache.
  */
 flush_data_cache:
 	lis	r3,CONFIG_KERNEL_START@h
 	ori	r3,r3,CONFIG_KERNEL_START@l
 	li	r4,NUM_CACHE_LINES
 	mtctr	r4
 1:
 	lwz	r4,0(r3)
 	addi	r3,r3,L1_CACHE_BYTES	/* Next line, please */
 	bdnz	1b
 	blr
	#include <asm/reg.h>
	#include <asm/ppc_asm.h>
	#include <asm/processor.h>
	#include <asm/cache.h>


	#define SDRAM_CTRL 0x104
	#define SC_MODE_EN (1<<31)
	#define SC_CKE (1<<30)
	#define SC_REF_EN (1<<28)
	#define SC_SOFT_PRE (1<<1)

	#define GPIOW_GPIOE 0xc00
	#define GPIOW_DDR 0xc08
	#define GPIOW_DVO 0xc0c

	#define CDM_CE 0x214
	#define CDM_SDRAM (1<<3)


	/* helpers... beware: r10 and r4 are overwritten */
	#define SAVE_SPRN(reg, addr) \
	mfspr r10, SPRN_##reg; \
	stw r10, ((addr)*4)(r4);

	#define LOAD_SPRN(reg, addr) \
	lwz r10, ((addr)*4)(r4); \
	mtspr SPRN_##reg, r10; \
	sync; \
	isync;


	.data
	registers:
	.space 0x5c*4
	.text

	/* ---------------------------------------------------------------------- */
	/* low-power mode with help of M68HLC908QT1 */

	.globl lite5200_low_power
	lite5200_low_power:

	mr r7, r3 /* save SRAM va */
	mr r8, r4 /* save MBAR va */

	/* setup wakeup address for u-boot at physical location 0x0 */
	lis r3, CONFIG_KERNEL_START@h
	lis r4, lite5200_wakeup@h
	ori r4, r4, lite5200_wakeup@l
	sub r4, r4, r3
	stw r4, 0(r3)


	/*
	* save stuff BDI overwrites
	* 0xf0 (0xe0->0x100 gets overwritten when BDI connected;
	* even when CONFIG_BDI* is disabled and MMU XLAT commented; heisenbug?))
	* WARNING: self-refresh doesn't seem to work when BDI2000 is connected,
	* possibly because BDI sets SDRAM registers before wakeup code does
	*/
	lis r4, registers@h
	ori r4, r4, registers@l
	lwz r10, 0xf0(r3)
	stw r10, (0x1d*4)(r4)

	/* save registers to r4 [destroys r10] */
	SAVE_SPRN(LR, 0x1c)
	bl save_regs

	/* flush caches [destroys r3, r4] */
	bl flush_data_cache


	/* copy code to sram */
	mr r4, r7
	li r3, (sram_code_end - sram_code)/4
	mtctr r3
	lis r3, sram_code@h
	ori r3, r3, sram_code@l
	1:
	lwz r5, 0(r3)
	stw r5, 0(r4)
	addi r3, r3, 4
	addi r4, r4, 4
	bdnz 1b

	/* get tb_ticks_per_usec */
	lis r3, tb_ticks_per_usec@h
	lwz r11, tb_ticks_per_usec@l(r3)

	/* disable I and D caches */
	mfspr r3, SPRN_HID0
	ori r3, r3, HID0_ICE \| HID0_DCE
	xori r3, r3, HID0_ICE \| HID0_DCE
	sync; isync;
	mtspr SPRN_HID0, r3
	sync; isync;

	/* jump to sram */
	mtlr r7
	blrl
	/* doesn't return */


	sram_code:
	/* self refresh */
	lwz r4, SDRAM_CTRL(r8)

	/* send NOP (precharge) */
	oris r4, r4, SC_MODE_EN@h /* mode_en */
	stw r4, SDRAM_CTRL(r8)
	sync

	ori r4, r4, SC_SOFT_PRE /* soft_pre */
	stw r4, SDRAM_CTRL(r8)
	sync
	xori r4, r4, SC_SOFT_PRE

	xoris r4, r4, SC_MODE_EN@h /* !mode_en */
	stw r4, SDRAM_CTRL(r8)
	sync

	/* delay (for NOP to finish) */
	li r12, 1
	bl udelay

	/*
	* mode_en must not be set when enabling self-refresh
	* send AR with CKE low (self-refresh)
	*/
	oris r4, r4, (SC_REF_EN \| SC_CKE)@h
	xoris r4, r4, (SC_CKE)@h /* ref_en !cke */
	stw r4, SDRAM_CTRL(r8)
	sync

	/* delay (after !CKE there should be two cycles) */
	li r12, 1
	bl udelay

	/* disable clock */
	lwz r4, CDM_CE(r8)
	ori r4, r4, CDM_SDRAM
	xori r4, r4, CDM_SDRAM
	stw r4, CDM_CE(r8)
	sync

	/* delay a bit */
	li r12, 1
	bl udelay


	/* turn off with QT chip */
	li r4, 0x02
	stb r4, GPIOW_GPIOE(r8) /* enable gpio_wkup1 */
	sync

	stb r4, GPIOW_DVO(r8) /* "output" high */
	sync
	stb r4, GPIOW_DDR(r8) /* output */
	sync
	stb r4, GPIOW_DVO(r8) /* output high */
	sync

	/* 10uS delay */
	li r12, 10
	bl udelay

	/* turn off */
	li r4, 0
	stb r4, GPIOW_DVO(r8) /* output low */
	sync

	/* wait until we're offline */
	1:
	b 1b


	/* local udelay in sram is needed */
	udelay: /* r11 - tb_ticks_per_usec, r12 - usecs, overwrites r13 */
	mullw r12, r12, r11
	mftb r13 /* start */
	addi r12, r13, r12 /* end */
	1:
	mftb r13 /* current */
	cmp cr0, r13, r12
	blt 1b
	blr

	sram_code_end:



	/* uboot jumps here on resume */
	lite5200_wakeup:
	bl restore_regs


	/* HIDs, MSR */
	LOAD_SPRN(HID1, 0x19)
	LOAD_SPRN(HID2, 0x1a)


	/* address translation is tricky (see turn_on_mmu) */
	mfmsr r10
	ori r10, r10, MSR_DR \| MSR_IR


	mtspr SPRN_SRR1, r10
	lis r10, mmu_on@h
	ori r10, r10, mmu_on@l
	mtspr SPRN_SRR0, r10
	sync
	rfi
	mmu_on:
	/* kernel offset (r4 is still set from restore_registers) */
	addis r4, r4, CONFIG_KERNEL_START@h


	/* restore MSR */
	lwz r10, (4*0x1b)(r4)
	mtmsr r10
	sync; isync;

	/* invalidate caches */
	mfspr r10, SPRN_HID0
	ori r5, r10, HID0_ICFI \| HID0_DCI
	mtspr SPRN_HID0, r5 /* invalidate caches */
	sync; isync;
	mtspr SPRN_HID0, r10
	sync; isync;

	/* enable caches */
	lwz r10, (4*0x18)(r4)
	mtspr SPRN_HID0, r10 /* restore (enable caches, DPM) */
	/* ^ this has to be after address translation set in MSR */
	sync
	isync


	/* restore 0xf0 (BDI2000) */
	lis r3, CONFIG_KERNEL_START@h
	lwz r10, (0x1d*4)(r4)
	stw r10, 0xf0(r3)

	LOAD_SPRN(LR, 0x1c)


	blr


	/* ---------------------------------------------------------------------- */
	/* boring code: helpers */

	/* save registers */
	#define SAVE_BAT(n, addr) \
	SAVE_SPRN(DBAT##n##L, addr); \
	SAVE_SPRN(DBAT##n##U, addr+1); \
	SAVE_SPRN(IBAT##n##L, addr+2); \
	SAVE_SPRN(IBAT##n##U, addr+3);

	#define SAVE_SR(n, addr) \
	mfsr r10, n; \
	stw r10, ((addr)*4)(r4);

	#define SAVE_4SR(n, addr) \
	SAVE_SR(n, addr); \
	SAVE_SR(n+1, addr+1); \
	SAVE_SR(n+2, addr+2); \
	SAVE_SR(n+3, addr+3);

	save_regs:
	stw r0, 0(r4)
	stw r1, 0x4(r4)
	stw r2, 0x8(r4)
	stmw r11, 0xc(r4) /* 0xc -> 0x5f, (0x184-1) /

	SAVE_SPRN(HID0, 0x18)
	SAVE_SPRN(HID1, 0x19)
	SAVE_SPRN(HID2, 0x1a)
	mfmsr r10
	stw r10, (4*0x1b)(r4)
	/SAVE_SPRN(LR, 0x1c) have to save it before the call /
	/* 0x1d reserved by 0xf0 */
	SAVE_SPRN(RPA, 0x1e)
	SAVE_SPRN(SDR1, 0x1f)

	/* save MMU regs */
	SAVE_BAT(0, 0x20)
	SAVE_BAT(1, 0x24)
	SAVE_BAT(2, 0x28)
	SAVE_BAT(3, 0x2c)
	SAVE_BAT(4, 0x30)
	SAVE_BAT(5, 0x34)
	SAVE_BAT(6, 0x38)
	SAVE_BAT(7, 0x3c)

	SAVE_4SR(0, 0x40)
	SAVE_4SR(4, 0x44)
	SAVE_4SR(8, 0x48)
	SAVE_4SR(12, 0x4c)

	SAVE_SPRN(SPRG0, 0x50)
	SAVE_SPRN(SPRG1, 0x51)
	SAVE_SPRN(SPRG2, 0x52)
	SAVE_SPRN(SPRG3, 0x53)
	SAVE_SPRN(SPRG4, 0x54)
	SAVE_SPRN(SPRG5, 0x55)
	SAVE_SPRN(SPRG6, 0x56)
	SAVE_SPRN(SPRG7, 0x57)

	SAVE_SPRN(IABR, 0x58)
	SAVE_SPRN(DABR, 0x59)
	SAVE_SPRN(TBRL, 0x5a)
	SAVE_SPRN(TBRU, 0x5b)

	blr


	/* restore registers */
	#define LOAD_BAT(n, addr) \
	LOAD_SPRN(DBAT##n##L, addr); \
	LOAD_SPRN(DBAT##n##U, addr+1); \
	LOAD_SPRN(IBAT##n##L, addr+2); \
	LOAD_SPRN(IBAT##n##U, addr+3);

	#define LOAD_SR(n, addr) \
	lwz r10, ((addr)*4)(r4); \
	mtsr n, r10;

	#define LOAD_4SR(n, addr) \
	LOAD_SR(n, addr); \
	LOAD_SR(n+1, addr+1); \
	LOAD_SR(n+2, addr+2); \
	LOAD_SR(n+3, addr+3);

	restore_regs:
	lis r4, registers@h
	ori r4, r4, registers@l

	/* MMU is not up yet */
	subis r4, r4, CONFIG_KERNEL_START@h

	lwz r0, 0(r4)
	lwz r1, 0x4(r4)
	lwz r2, 0x8(r4)
	lmw r11, 0xc(r4)

	/*
	* these are a bit tricky
	*
	* 0x18 - HID0
	* 0x19 - HID1
	* 0x1a - HID2
	* 0x1b - MSR
	* 0x1c - LR
	* 0x1d - reserved by 0xf0 (BDI2000)
	*/
	LOAD_SPRN(RPA, 0x1e);
	LOAD_SPRN(SDR1, 0x1f);

	/* restore MMU regs */
	LOAD_BAT(0, 0x20)
	LOAD_BAT(1, 0x24)
	LOAD_BAT(2, 0x28)
	LOAD_BAT(3, 0x2c)
	LOAD_BAT(4, 0x30)
	LOAD_BAT(5, 0x34)
	LOAD_BAT(6, 0x38)
	LOAD_BAT(7, 0x3c)

	LOAD_4SR(0, 0x40)
	LOAD_4SR(4, 0x44)
	LOAD_4SR(8, 0x48)
	LOAD_4SR(12, 0x4c)

	/* rest of regs */
	LOAD_SPRN(SPRG0, 0x50);
	LOAD_SPRN(SPRG1, 0x51);
	LOAD_SPRN(SPRG2, 0x52);
	LOAD_SPRN(SPRG3, 0x53);
	LOAD_SPRN(SPRG4, 0x54);
	LOAD_SPRN(SPRG5, 0x55);
	LOAD_SPRN(SPRG6, 0x56);
	LOAD_SPRN(SPRG7, 0x57);

	LOAD_SPRN(IABR, 0x58);
	LOAD_SPRN(DABR, 0x59);
	LOAD_SPRN(TBWL, 0x5a); /* these two have separate R/W regs */
	LOAD_SPRN(TBWU, 0x5b);

	blr



	/* cache flushing code. copied from arch/ppc/boot/util.S */
	#define NUM_CACHE_LINES (128*8)

	/*
	* Flush data cache
	* Do this by just reading lots of stuff into the cache.
	*/
	flush_data_cache:
	lis r3,CONFIG_KERNEL_START@h
	ori r3,r3,CONFIG_KERNEL_START@l
	li r4,NUM_CACHE_LINES
	mtctr r4
	1:
	lwz r4,0(r3)
	addi r3,r3,L1_CACHE_BYTES /* Next line, please */
	bdnz 1b
	blr