blob: 7116dcba0c9ed2df2afd680c4407d7f57c0244a7 [file] [log] [blame]
/*
* misc.c
*
* This is a collection of several routines from gzip-1.0.3
* adapted for Linux.
*
* malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
* puts by Nick Holloway 1993, better puts by Martin Mares 1995
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
#include "misc.h"
/* WARNING!!
* This code is compiled with -fPIC and it is relocated dynamically
* at run time, but no relocation processing is performed.
* This means that it is not safe to place pointers in static structures.
*/
/*
* Getting to provable safe in place decompression is hard.
* Worst case behaviours need to be analyzed.
* Background information:
*
* The file layout is:
* magic[2]
* method[1]
* flags[1]
* timestamp[4]
* extraflags[1]
* os[1]
* compressed data blocks[N]
* crc[4] orig_len[4]
*
* resulting in 18 bytes of non compressed data overhead.
*
* Files divided into blocks
* 1 bit (last block flag)
* 2 bits (block type)
*
* 1 block occurs every 32K -1 bytes or when there 50% compression
* has been achieved. The smallest block type encoding is always used.
*
* stored:
* 32 bits length in bytes.
*
* fixed:
* magic fixed tree.
* symbols.
*
* dynamic:
* dynamic tree encoding.
* symbols.
*
*
* The buffer for decompression in place is the length of the
* uncompressed data, plus a small amount extra to keep the algorithm safe.
* The compressed data is placed at the end of the buffer. The output
* pointer is placed at the start of the buffer and the input pointer
* is placed where the compressed data starts. Problems will occur
* when the output pointer overruns the input pointer.
*
* The output pointer can only overrun the input pointer if the input
* pointer is moving faster than the output pointer. A condition only
* triggered by data whose compressed form is larger than the uncompressed
* form.
*
* The worst case at the block level is a growth of the compressed data
* of 5 bytes per 32767 bytes.
*
* The worst case internal to a compressed block is very hard to figure.
* The worst case can at least be boundined by having one bit that represents
* 32764 bytes and then all of the rest of the bytes representing the very
* very last byte.
*
* All of which is enough to compute an amount of extra data that is required
* to be safe. To avoid problems at the block level allocating 5 extra bytes
* per 32767 bytes of data is sufficient. To avoind problems internal to a
* block adding an extra 32767 bytes (the worst case uncompressed block size)
* is sufficient, to ensure that in the worst case the decompressed data for
* block will stop the byte before the compressed data for a block begins.
* To avoid problems with the compressed data's meta information an extra 18
* bytes are needed. Leading to the formula:
*
* extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size.
*
* Adding 8 bytes per 32K is a bit excessive but much easier to calculate.
* Adding 32768 instead of 32767 just makes for round numbers.
* Adding the decompressor_size is necessary as it musht live after all
* of the data as well. Last I measured the decompressor is about 14K.
* 10K of actual data and 4K of bss.
*
*/
/*
* gzip declarations
*/
#define STATIC static
#undef memset
#undef memcpy
#define memzero(s, n) memset((s), 0, (n))
static void error(char *m);
/*
* This is set up by the setup-routine at boot-time
*/
struct boot_params *real_mode; /* Pointer to real-mode data */
static int quiet;
static int debug;
void *memset(void *s, int c, size_t n);
void *memcpy(void *dest, const void *src, size_t n);
#ifdef CONFIG_X86_64
#define memptr long
#else
#define memptr unsigned
#endif
static memptr free_mem_ptr;
static memptr free_mem_end_ptr;
static char *vidmem;
static int vidport;
static int lines, cols;
#ifdef CONFIG_KERNEL_GZIP
#include "../../../../lib/decompress_inflate.c"
#endif
#ifdef CONFIG_KERNEL_BZIP2
#include "../../../../lib/decompress_bunzip2.c"
#endif
#ifdef CONFIG_KERNEL_LZMA
#include "../../../../lib/decompress_unlzma.c"
#endif
#ifdef CONFIG_KERNEL_XZ
#include "../../../../lib/decompress_unxz.c"
#endif
#ifdef CONFIG_KERNEL_LZO
#include "../../../../lib/decompress_unlzo.c"
#endif
static void scroll(void)
{
int i;
memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2);
for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2)
vidmem[i] = ' ';
}
#define XMTRDY 0x20
#define TXR 0 /* Transmit register (WRITE) */
#define LSR 5 /* Line Status */
static void serial_putchar(int ch)
{
unsigned timeout = 0xffff;
while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout)
cpu_relax();
outb(ch, early_serial_base + TXR);
}
void __putstr(int error, const char *s)
{
int x, y, pos;
char c;
#ifndef CONFIG_X86_VERBOSE_BOOTUP
if (!error)
return;
#endif
if (early_serial_base) {
const char *str = s;
while (*str) {
if (*str == '\n')
serial_putchar('\r');
serial_putchar(*str++);
}
}
if (real_mode->screen_info.orig_video_mode == 0 &&
lines == 0 && cols == 0)
return;
x = real_mode->screen_info.orig_x;
y = real_mode->screen_info.orig_y;
while ((c = *s++) != '\0') {
if (c == '\n') {
x = 0;
if (++y >= lines) {
scroll();
y--;
}
} else {
vidmem[(x + cols * y) * 2] = c;
if (++x >= cols) {
x = 0;
if (++y >= lines) {
scroll();
y--;
}
}
}
}
real_mode->screen_info.orig_x = x;
real_mode->screen_info.orig_y = y;
pos = (x + cols * y) * 2; /* Update cursor position */
outb(14, vidport);
outb(0xff & (pos >> 9), vidport+1);
outb(15, vidport);
outb(0xff & (pos >> 1), vidport+1);
}
void *memset(void *s, int c, size_t n)
{
int i;
char *ss = s;
for (i = 0; i < n; i++)
ss[i] = c;
return s;
}
#ifdef CONFIG_X86_32
void *memcpy(void *dest, const void *src, size_t n)
{
int d0, d1, d2;
asm volatile(
"rep ; movsl\n\t"
"movl %4,%%ecx\n\t"
"rep ; movsb\n\t"
: "=&c" (d0), "=&D" (d1), "=&S" (d2)
: "0" (n >> 2), "g" (n & 3), "1" (dest), "2" (src)
: "memory");
return dest;
}
#else
void *memcpy(void *dest, const void *src, size_t n)
{
long d0, d1, d2;
asm volatile(
"rep ; movsq\n\t"
"movq %4,%%rcx\n\t"
"rep ; movsb\n\t"
: "=&c" (d0), "=&D" (d1), "=&S" (d2)
: "0" (n >> 3), "g" (n & 7), "1" (dest), "2" (src)
: "memory");
return dest;
}
#endif
static void error(char *x)
{
__putstr(1, "\n\n");
__putstr(1, x);
__putstr(1, "\n\n -- System halted");
while (1)
asm("hlt");
}
static void parse_elf(void *output)
{
#ifdef CONFIG_X86_64
Elf64_Ehdr ehdr;
Elf64_Phdr *phdrs, *phdr;
#else
Elf32_Ehdr ehdr;
Elf32_Phdr *phdrs, *phdr;
#endif
void *dest;
int i;
memcpy(&ehdr, output, sizeof(ehdr));
if (ehdr.e_ident[EI_MAG0] != ELFMAG0 ||
ehdr.e_ident[EI_MAG1] != ELFMAG1 ||
ehdr.e_ident[EI_MAG2] != ELFMAG2 ||
ehdr.e_ident[EI_MAG3] != ELFMAG3) {
error("Kernel is not a valid ELF file");
return;
}
if (!quiet)
putstr("Parsing ELF... ");
phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum);
if (!phdrs)
error("Failed to allocate space for phdrs");
memcpy(phdrs, output + ehdr.e_phoff, sizeof(*phdrs) * ehdr.e_phnum);
for (i = 0; i < ehdr.e_phnum; i++) {
phdr = &phdrs[i];
switch (phdr->p_type) {
case PT_LOAD:
#ifdef CONFIG_RELOCATABLE
dest = output;
dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR);
#else
dest = (void *)(phdr->p_paddr);
#endif
memcpy(dest,
output + phdr->p_offset,
phdr->p_filesz);
break;
default: /* Ignore other PT_* */ break;
}
}
free(phdrs);
}
asmlinkage void decompress_kernel(void *rmode, memptr heap,
unsigned char *input_data,
unsigned long input_len,
unsigned char *output)
{
real_mode = rmode;
if (cmdline_find_option_bool("quiet"))
quiet = 1;
if (cmdline_find_option_bool("debug"))
debug = 1;
if (real_mode->screen_info.orig_video_mode == 7) {
vidmem = (char *) 0xb0000;
vidport = 0x3b4;
} else {
vidmem = (char *) 0xb8000;
vidport = 0x3d4;
}
lines = real_mode->screen_info.orig_video_lines;
cols = real_mode->screen_info.orig_video_cols;
console_init();
if (debug)
putstr("early console in decompress_kernel\n");
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
error("Destination address inappropriately aligned");
#ifdef CONFIG_X86_64
if (heap > 0x3fffffffffffUL)
error("Destination address too large");
#else
if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
error("Destination address too large");
#endif
#ifndef CONFIG_RELOCATABLE
if ((unsigned long)output != LOAD_PHYSICAL_ADDR)
error("Wrong destination address");
#endif
if (!quiet)
putstr("\nDecompressing Linux... ");
decompress(input_data, input_len, NULL, NULL, output, NULL, error);
parse_elf(output);
if (!quiet)
putstr("done.\nBooting the kernel.\n");
return;
}