| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * Copyright(c) 2004 - 2006 Intel Corporation. All rights reserved. | 
 |  */ | 
 |  | 
 | /* | 
 |  * This code implements the DMA subsystem. It provides a HW-neutral interface | 
 |  * for other kernel code to use asynchronous memory copy capabilities, | 
 |  * if present, and allows different HW DMA drivers to register as providing | 
 |  * this capability. | 
 |  * | 
 |  * Due to the fact we are accelerating what is already a relatively fast | 
 |  * operation, the code goes to great lengths to avoid additional overhead, | 
 |  * such as locking. | 
 |  * | 
 |  * LOCKING: | 
 |  * | 
 |  * The subsystem keeps a global list of dma_device structs it is protected by a | 
 |  * mutex, dma_list_mutex. | 
 |  * | 
 |  * A subsystem can get access to a channel by calling dmaengine_get() followed | 
 |  * by dma_find_channel(), or if it has need for an exclusive channel it can call | 
 |  * dma_request_channel().  Once a channel is allocated a reference is taken | 
 |  * against its corresponding driver to disable removal. | 
 |  * | 
 |  * Each device has a channels list, which runs unlocked but is never modified | 
 |  * once the device is registered, it's just setup by the driver. | 
 |  * | 
 |  * See Documentation/driver-api/dmaengine for more details | 
 |  */ | 
 |  | 
 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
 |  | 
 | #include <linux/platform_device.h> | 
 | #include <linux/dma-mapping.h> | 
 | #include <linux/init.h> | 
 | #include <linux/module.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/device.h> | 
 | #include <linux/dmaengine.h> | 
 | #include <linux/hardirq.h> | 
 | #include <linux/spinlock.h> | 
 | #include <linux/percpu.h> | 
 | #include <linux/rcupdate.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/rculist.h> | 
 | #include <linux/idr.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/acpi.h> | 
 | #include <linux/acpi_dma.h> | 
 | #include <linux/of_dma.h> | 
 | #include <linux/mempool.h> | 
 | #include <linux/numa.h> | 
 |  | 
 | #include "dmaengine.h" | 
 |  | 
 | static DEFINE_MUTEX(dma_list_mutex); | 
 | static DEFINE_IDA(dma_ida); | 
 | static LIST_HEAD(dma_device_list); | 
 | static long dmaengine_ref_count; | 
 |  | 
 | /* --- debugfs implementation --- */ | 
 | #ifdef CONFIG_DEBUG_FS | 
 | #include <linux/debugfs.h> | 
 |  | 
 | static struct dentry *rootdir; | 
 |  | 
 | static void dmaengine_debug_register(struct dma_device *dma_dev) | 
 | { | 
 | 	dma_dev->dbg_dev_root = debugfs_create_dir(dev_name(dma_dev->dev), | 
 | 						   rootdir); | 
 | 	if (IS_ERR(dma_dev->dbg_dev_root)) | 
 | 		dma_dev->dbg_dev_root = NULL; | 
 | } | 
 |  | 
 | static void dmaengine_debug_unregister(struct dma_device *dma_dev) | 
 | { | 
 | 	debugfs_remove_recursive(dma_dev->dbg_dev_root); | 
 | 	dma_dev->dbg_dev_root = NULL; | 
 | } | 
 |  | 
 | static void dmaengine_dbg_summary_show(struct seq_file *s, | 
 | 				       struct dma_device *dma_dev) | 
 | { | 
 | 	struct dma_chan *chan; | 
 |  | 
 | 	list_for_each_entry(chan, &dma_dev->channels, device_node) { | 
 | 		if (chan->client_count) { | 
 | 			seq_printf(s, " %-13s| %s", dma_chan_name(chan), | 
 | 				   chan->dbg_client_name ?: "in-use"); | 
 |  | 
 | 			if (chan->router) | 
 | 				seq_printf(s, " (via router: %s)\n", | 
 | 					dev_name(chan->router->dev)); | 
 | 			else | 
 | 				seq_puts(s, "\n"); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static int dmaengine_summary_show(struct seq_file *s, void *data) | 
 | { | 
 | 	struct dma_device *dma_dev = NULL; | 
 |  | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	list_for_each_entry(dma_dev, &dma_device_list, global_node) { | 
 | 		seq_printf(s, "dma%d (%s): number of channels: %u\n", | 
 | 			   dma_dev->dev_id, dev_name(dma_dev->dev), | 
 | 			   dma_dev->chancnt); | 
 |  | 
 | 		if (dma_dev->dbg_summary_show) | 
 | 			dma_dev->dbg_summary_show(s, dma_dev); | 
 | 		else | 
 | 			dmaengine_dbg_summary_show(s, dma_dev); | 
 |  | 
 | 		if (!list_is_last(&dma_dev->global_node, &dma_device_list)) | 
 | 			seq_puts(s, "\n"); | 
 | 	} | 
 | 	mutex_unlock(&dma_list_mutex); | 
 |  | 
 | 	return 0; | 
 | } | 
 | DEFINE_SHOW_ATTRIBUTE(dmaengine_summary); | 
 |  | 
 | static void __init dmaengine_debugfs_init(void) | 
 | { | 
 | 	rootdir = debugfs_create_dir("dmaengine", NULL); | 
 |  | 
 | 	/* /sys/kernel/debug/dmaengine/summary */ | 
 | 	debugfs_create_file("summary", 0444, rootdir, NULL, | 
 | 			    &dmaengine_summary_fops); | 
 | } | 
 | #else | 
 | static inline void dmaengine_debugfs_init(void) { } | 
 | static inline int dmaengine_debug_register(struct dma_device *dma_dev) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline void dmaengine_debug_unregister(struct dma_device *dma_dev) { } | 
 | #endif	/* DEBUG_FS */ | 
 |  | 
 | /* --- sysfs implementation --- */ | 
 |  | 
 | #define DMA_SLAVE_NAME	"slave" | 
 |  | 
 | /** | 
 |  * dev_to_dma_chan - convert a device pointer to its sysfs container object | 
 |  * @dev:	device node | 
 |  * | 
 |  * Must be called under dma_list_mutex. | 
 |  */ | 
 | static struct dma_chan *dev_to_dma_chan(struct device *dev) | 
 | { | 
 | 	struct dma_chan_dev *chan_dev; | 
 |  | 
 | 	chan_dev = container_of(dev, typeof(*chan_dev), device); | 
 | 	return chan_dev->chan; | 
 | } | 
 |  | 
 | static ssize_t memcpy_count_show(struct device *dev, | 
 | 				 struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct dma_chan *chan; | 
 | 	unsigned long count = 0; | 
 | 	int i; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	chan = dev_to_dma_chan(dev); | 
 | 	if (chan) { | 
 | 		for_each_possible_cpu(i) | 
 | 			count += per_cpu_ptr(chan->local, i)->memcpy_count; | 
 | 		err = sprintf(buf, "%lu\n", count); | 
 | 	} else | 
 | 		err = -ENODEV; | 
 | 	mutex_unlock(&dma_list_mutex); | 
 |  | 
 | 	return err; | 
 | } | 
 | static DEVICE_ATTR_RO(memcpy_count); | 
 |  | 
 | static ssize_t bytes_transferred_show(struct device *dev, | 
 | 				      struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct dma_chan *chan; | 
 | 	unsigned long count = 0; | 
 | 	int i; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	chan = dev_to_dma_chan(dev); | 
 | 	if (chan) { | 
 | 		for_each_possible_cpu(i) | 
 | 			count += per_cpu_ptr(chan->local, i)->bytes_transferred; | 
 | 		err = sprintf(buf, "%lu\n", count); | 
 | 	} else | 
 | 		err = -ENODEV; | 
 | 	mutex_unlock(&dma_list_mutex); | 
 |  | 
 | 	return err; | 
 | } | 
 | static DEVICE_ATTR_RO(bytes_transferred); | 
 |  | 
 | static ssize_t in_use_show(struct device *dev, struct device_attribute *attr, | 
 | 			   char *buf) | 
 | { | 
 | 	struct dma_chan *chan; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	chan = dev_to_dma_chan(dev); | 
 | 	if (chan) | 
 | 		err = sprintf(buf, "%d\n", chan->client_count); | 
 | 	else | 
 | 		err = -ENODEV; | 
 | 	mutex_unlock(&dma_list_mutex); | 
 |  | 
 | 	return err; | 
 | } | 
 | static DEVICE_ATTR_RO(in_use); | 
 |  | 
 | static struct attribute *dma_dev_attrs[] = { | 
 | 	&dev_attr_memcpy_count.attr, | 
 | 	&dev_attr_bytes_transferred.attr, | 
 | 	&dev_attr_in_use.attr, | 
 | 	NULL, | 
 | }; | 
 | ATTRIBUTE_GROUPS(dma_dev); | 
 |  | 
 | static void chan_dev_release(struct device *dev) | 
 | { | 
 | 	struct dma_chan_dev *chan_dev; | 
 |  | 
 | 	chan_dev = container_of(dev, typeof(*chan_dev), device); | 
 | 	kfree(chan_dev); | 
 | } | 
 |  | 
 | static struct class dma_devclass = { | 
 | 	.name		= "dma", | 
 | 	.dev_groups	= dma_dev_groups, | 
 | 	.dev_release	= chan_dev_release, | 
 | }; | 
 |  | 
 | /* --- client and device registration --- */ | 
 |  | 
 | /* enable iteration over all operation types */ | 
 | static dma_cap_mask_t dma_cap_mask_all; | 
 |  | 
 | /** | 
 |  * struct dma_chan_tbl_ent - tracks channel allocations per core/operation | 
 |  * @chan:	associated channel for this entry | 
 |  */ | 
 | struct dma_chan_tbl_ent { | 
 | 	struct dma_chan *chan; | 
 | }; | 
 |  | 
 | /* percpu lookup table for memory-to-memory offload providers */ | 
 | static struct dma_chan_tbl_ent __percpu *channel_table[DMA_TX_TYPE_END]; | 
 |  | 
 | static int __init dma_channel_table_init(void) | 
 | { | 
 | 	enum dma_transaction_type cap; | 
 | 	int err = 0; | 
 |  | 
 | 	bitmap_fill(dma_cap_mask_all.bits, DMA_TX_TYPE_END); | 
 |  | 
 | 	/* 'interrupt', 'private', and 'slave' are channel capabilities, | 
 | 	 * but are not associated with an operation so they do not need | 
 | 	 * an entry in the channel_table | 
 | 	 */ | 
 | 	clear_bit(DMA_INTERRUPT, dma_cap_mask_all.bits); | 
 | 	clear_bit(DMA_PRIVATE, dma_cap_mask_all.bits); | 
 | 	clear_bit(DMA_SLAVE, dma_cap_mask_all.bits); | 
 |  | 
 | 	for_each_dma_cap_mask(cap, dma_cap_mask_all) { | 
 | 		channel_table[cap] = alloc_percpu(struct dma_chan_tbl_ent); | 
 | 		if (!channel_table[cap]) { | 
 | 			err = -ENOMEM; | 
 | 			break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (err) { | 
 | 		pr_err("dmaengine dma_channel_table_init failure: %d\n", err); | 
 | 		for_each_dma_cap_mask(cap, dma_cap_mask_all) | 
 | 			free_percpu(channel_table[cap]); | 
 | 	} | 
 |  | 
 | 	return err; | 
 | } | 
 | arch_initcall(dma_channel_table_init); | 
 |  | 
 | /** | 
 |  * dma_chan_is_local - checks if the channel is in the same NUMA-node as the CPU | 
 |  * @chan:	DMA channel to test | 
 |  * @cpu:	CPU index which the channel should be close to | 
 |  * | 
 |  * Returns true if the channel is in the same NUMA-node as the CPU. | 
 |  */ | 
 | static bool dma_chan_is_local(struct dma_chan *chan, int cpu) | 
 | { | 
 | 	int node = dev_to_node(chan->device->dev); | 
 | 	return node == NUMA_NO_NODE || | 
 | 		cpumask_test_cpu(cpu, cpumask_of_node(node)); | 
 | } | 
 |  | 
 | /** | 
 |  * min_chan - finds the channel with min count and in the same NUMA-node as the CPU | 
 |  * @cap:	capability to match | 
 |  * @cpu:	CPU index which the channel should be close to | 
 |  * | 
 |  * If some channels are close to the given CPU, the one with the lowest | 
 |  * reference count is returned. Otherwise, CPU is ignored and only the | 
 |  * reference count is taken into account. | 
 |  * | 
 |  * Must be called under dma_list_mutex. | 
 |  */ | 
 | static struct dma_chan *min_chan(enum dma_transaction_type cap, int cpu) | 
 | { | 
 | 	struct dma_device *device; | 
 | 	struct dma_chan *chan; | 
 | 	struct dma_chan *min = NULL; | 
 | 	struct dma_chan *localmin = NULL; | 
 |  | 
 | 	list_for_each_entry(device, &dma_device_list, global_node) { | 
 | 		if (!dma_has_cap(cap, device->cap_mask) || | 
 | 		    dma_has_cap(DMA_PRIVATE, device->cap_mask)) | 
 | 			continue; | 
 | 		list_for_each_entry(chan, &device->channels, device_node) { | 
 | 			if (!chan->client_count) | 
 | 				continue; | 
 | 			if (!min || chan->table_count < min->table_count) | 
 | 				min = chan; | 
 |  | 
 | 			if (dma_chan_is_local(chan, cpu)) | 
 | 				if (!localmin || | 
 | 				    chan->table_count < localmin->table_count) | 
 | 					localmin = chan; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	chan = localmin ? localmin : min; | 
 |  | 
 | 	if (chan) | 
 | 		chan->table_count++; | 
 |  | 
 | 	return chan; | 
 | } | 
 |  | 
 | /** | 
 |  * dma_channel_rebalance - redistribute the available channels | 
 |  * | 
 |  * Optimize for CPU isolation (each CPU gets a dedicated channel for an | 
 |  * operation type) in the SMP case, and operation isolation (avoid | 
 |  * multi-tasking channels) in the non-SMP case. | 
 |  * | 
 |  * Must be called under dma_list_mutex. | 
 |  */ | 
 | static void dma_channel_rebalance(void) | 
 | { | 
 | 	struct dma_chan *chan; | 
 | 	struct dma_device *device; | 
 | 	int cpu; | 
 | 	int cap; | 
 |  | 
 | 	/* undo the last distribution */ | 
 | 	for_each_dma_cap_mask(cap, dma_cap_mask_all) | 
 | 		for_each_possible_cpu(cpu) | 
 | 			per_cpu_ptr(channel_table[cap], cpu)->chan = NULL; | 
 |  | 
 | 	list_for_each_entry(device, &dma_device_list, global_node) { | 
 | 		if (dma_has_cap(DMA_PRIVATE, device->cap_mask)) | 
 | 			continue; | 
 | 		list_for_each_entry(chan, &device->channels, device_node) | 
 | 			chan->table_count = 0; | 
 | 	} | 
 |  | 
 | 	/* don't populate the channel_table if no clients are available */ | 
 | 	if (!dmaengine_ref_count) | 
 | 		return; | 
 |  | 
 | 	/* redistribute available channels */ | 
 | 	for_each_dma_cap_mask(cap, dma_cap_mask_all) | 
 | 		for_each_online_cpu(cpu) { | 
 | 			chan = min_chan(cap, cpu); | 
 | 			per_cpu_ptr(channel_table[cap], cpu)->chan = chan; | 
 | 		} | 
 | } | 
 |  | 
 | static int dma_device_satisfies_mask(struct dma_device *device, | 
 | 				     const dma_cap_mask_t *want) | 
 | { | 
 | 	dma_cap_mask_t has; | 
 |  | 
 | 	bitmap_and(has.bits, want->bits, device->cap_mask.bits, | 
 | 		DMA_TX_TYPE_END); | 
 | 	return bitmap_equal(want->bits, has.bits, DMA_TX_TYPE_END); | 
 | } | 
 |  | 
 | static struct module *dma_chan_to_owner(struct dma_chan *chan) | 
 | { | 
 | 	return chan->device->owner; | 
 | } | 
 |  | 
 | /** | 
 |  * balance_ref_count - catch up the channel reference count | 
 |  * @chan:	channel to balance ->client_count versus dmaengine_ref_count | 
 |  * | 
 |  * Must be called under dma_list_mutex. | 
 |  */ | 
 | static void balance_ref_count(struct dma_chan *chan) | 
 | { | 
 | 	struct module *owner = dma_chan_to_owner(chan); | 
 |  | 
 | 	while (chan->client_count < dmaengine_ref_count) { | 
 | 		__module_get(owner); | 
 | 		chan->client_count++; | 
 | 	} | 
 | } | 
 |  | 
 | static void dma_device_release(struct kref *ref) | 
 | { | 
 | 	struct dma_device *device = container_of(ref, struct dma_device, ref); | 
 |  | 
 | 	list_del_rcu(&device->global_node); | 
 | 	dma_channel_rebalance(); | 
 |  | 
 | 	if (device->device_release) | 
 | 		device->device_release(device); | 
 | } | 
 |  | 
 | static void dma_device_put(struct dma_device *device) | 
 | { | 
 | 	lockdep_assert_held(&dma_list_mutex); | 
 | 	kref_put(&device->ref, dma_device_release); | 
 | } | 
 |  | 
 | /** | 
 |  * dma_chan_get - try to grab a DMA channel's parent driver module | 
 |  * @chan:	channel to grab | 
 |  * | 
 |  * Must be called under dma_list_mutex. | 
 |  */ | 
 | static int dma_chan_get(struct dma_chan *chan) | 
 | { | 
 | 	struct module *owner = dma_chan_to_owner(chan); | 
 | 	int ret; | 
 |  | 
 | 	/* The channel is already in use, update client count */ | 
 | 	if (chan->client_count) { | 
 | 		__module_get(owner); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (!try_module_get(owner)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	ret = kref_get_unless_zero(&chan->device->ref); | 
 | 	if (!ret) { | 
 | 		ret = -ENODEV; | 
 | 		goto module_put_out; | 
 | 	} | 
 |  | 
 | 	/* allocate upon first client reference */ | 
 | 	if (chan->device->device_alloc_chan_resources) { | 
 | 		ret = chan->device->device_alloc_chan_resources(chan); | 
 | 		if (ret < 0) | 
 | 			goto err_out; | 
 | 	} | 
 |  | 
 | 	if (!dma_has_cap(DMA_PRIVATE, chan->device->cap_mask)) | 
 | 		balance_ref_count(chan); | 
 |  | 
 | out: | 
 | 	chan->client_count++; | 
 | 	return 0; | 
 |  | 
 | err_out: | 
 | 	dma_device_put(chan->device); | 
 | module_put_out: | 
 | 	module_put(owner); | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * dma_chan_put - drop a reference to a DMA channel's parent driver module | 
 |  * @chan:	channel to release | 
 |  * | 
 |  * Must be called under dma_list_mutex. | 
 |  */ | 
 | static void dma_chan_put(struct dma_chan *chan) | 
 | { | 
 | 	/* This channel is not in use, bail out */ | 
 | 	if (!chan->client_count) | 
 | 		return; | 
 |  | 
 | 	chan->client_count--; | 
 |  | 
 | 	/* This channel is not in use anymore, free it */ | 
 | 	if (!chan->client_count && chan->device->device_free_chan_resources) { | 
 | 		/* Make sure all operations have completed */ | 
 | 		dmaengine_synchronize(chan); | 
 | 		chan->device->device_free_chan_resources(chan); | 
 | 	} | 
 |  | 
 | 	/* If the channel is used via a DMA request router, free the mapping */ | 
 | 	if (chan->router && chan->router->route_free) { | 
 | 		chan->router->route_free(chan->router->dev, chan->route_data); | 
 | 		chan->router = NULL; | 
 | 		chan->route_data = NULL; | 
 | 	} | 
 |  | 
 | 	dma_device_put(chan->device); | 
 | 	module_put(dma_chan_to_owner(chan)); | 
 | } | 
 |  | 
 | enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie) | 
 | { | 
 | 	enum dma_status status; | 
 | 	unsigned long dma_sync_wait_timeout = jiffies + msecs_to_jiffies(5000); | 
 |  | 
 | 	dma_async_issue_pending(chan); | 
 | 	do { | 
 | 		status = dma_async_is_tx_complete(chan, cookie, NULL, NULL); | 
 | 		if (time_after_eq(jiffies, dma_sync_wait_timeout)) { | 
 | 			dev_err(chan->device->dev, "%s: timeout!\n", __func__); | 
 | 			return DMA_ERROR; | 
 | 		} | 
 | 		if (status != DMA_IN_PROGRESS) | 
 | 			break; | 
 | 		cpu_relax(); | 
 | 	} while (1); | 
 |  | 
 | 	return status; | 
 | } | 
 | EXPORT_SYMBOL(dma_sync_wait); | 
 |  | 
 | /** | 
 |  * dma_find_channel - find a channel to carry out the operation | 
 |  * @tx_type:	transaction type | 
 |  */ | 
 | struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type) | 
 | { | 
 | 	return this_cpu_read(channel_table[tx_type]->chan); | 
 | } | 
 | EXPORT_SYMBOL(dma_find_channel); | 
 |  | 
 | /** | 
 |  * dma_issue_pending_all - flush all pending operations across all channels | 
 |  */ | 
 | void dma_issue_pending_all(void) | 
 | { | 
 | 	struct dma_device *device; | 
 | 	struct dma_chan *chan; | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	list_for_each_entry_rcu(device, &dma_device_list, global_node) { | 
 | 		if (dma_has_cap(DMA_PRIVATE, device->cap_mask)) | 
 | 			continue; | 
 | 		list_for_each_entry(chan, &device->channels, device_node) | 
 | 			if (chan->client_count) | 
 | 				device->device_issue_pending(chan); | 
 | 	} | 
 | 	rcu_read_unlock(); | 
 | } | 
 | EXPORT_SYMBOL(dma_issue_pending_all); | 
 |  | 
 | int dma_get_slave_caps(struct dma_chan *chan, struct dma_slave_caps *caps) | 
 | { | 
 | 	struct dma_device *device; | 
 |  | 
 | 	if (!chan || !caps) | 
 | 		return -EINVAL; | 
 |  | 
 | 	device = chan->device; | 
 |  | 
 | 	/* check if the channel supports slave transactions */ | 
 | 	if (!(test_bit(DMA_SLAVE, device->cap_mask.bits) || | 
 | 	      test_bit(DMA_CYCLIC, device->cap_mask.bits))) | 
 | 		return -ENXIO; | 
 |  | 
 | 	/* | 
 | 	 * Check whether it reports it uses the generic slave | 
 | 	 * capabilities, if not, that means it doesn't support any | 
 | 	 * kind of slave capabilities reporting. | 
 | 	 */ | 
 | 	if (!device->directions) | 
 | 		return -ENXIO; | 
 |  | 
 | 	caps->src_addr_widths = device->src_addr_widths; | 
 | 	caps->dst_addr_widths = device->dst_addr_widths; | 
 | 	caps->directions = device->directions; | 
 | 	caps->min_burst = device->min_burst; | 
 | 	caps->max_burst = device->max_burst; | 
 | 	caps->max_sg_burst = device->max_sg_burst; | 
 | 	caps->residue_granularity = device->residue_granularity; | 
 | 	caps->descriptor_reuse = device->descriptor_reuse; | 
 | 	caps->cmd_pause = !!device->device_pause; | 
 | 	caps->cmd_resume = !!device->device_resume; | 
 | 	caps->cmd_terminate = !!device->device_terminate_all; | 
 |  | 
 | 	/* | 
 | 	 * DMA engine device might be configured with non-uniformly | 
 | 	 * distributed slave capabilities per device channels. In this | 
 | 	 * case the corresponding driver may provide the device_caps | 
 | 	 * callback to override the generic capabilities with | 
 | 	 * channel-specific ones. | 
 | 	 */ | 
 | 	if (device->device_caps) | 
 | 		device->device_caps(chan, caps); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(dma_get_slave_caps); | 
 |  | 
 | static struct dma_chan *private_candidate(const dma_cap_mask_t *mask, | 
 | 					  struct dma_device *dev, | 
 | 					  dma_filter_fn fn, void *fn_param) | 
 | { | 
 | 	struct dma_chan *chan; | 
 |  | 
 | 	if (mask && !dma_device_satisfies_mask(dev, mask)) { | 
 | 		dev_dbg(dev->dev, "%s: wrong capabilities\n", __func__); | 
 | 		return NULL; | 
 | 	} | 
 | 	/* devices with multiple channels need special handling as we need to | 
 | 	 * ensure that all channels are either private or public. | 
 | 	 */ | 
 | 	if (dev->chancnt > 1 && !dma_has_cap(DMA_PRIVATE, dev->cap_mask)) | 
 | 		list_for_each_entry(chan, &dev->channels, device_node) { | 
 | 			/* some channels are already publicly allocated */ | 
 | 			if (chan->client_count) | 
 | 				return NULL; | 
 | 		} | 
 |  | 
 | 	list_for_each_entry(chan, &dev->channels, device_node) { | 
 | 		if (chan->client_count) { | 
 | 			dev_dbg(dev->dev, "%s: %s busy\n", | 
 | 				 __func__, dma_chan_name(chan)); | 
 | 			continue; | 
 | 		} | 
 | 		if (fn && !fn(chan, fn_param)) { | 
 | 			dev_dbg(dev->dev, "%s: %s filter said false\n", | 
 | 				 __func__, dma_chan_name(chan)); | 
 | 			continue; | 
 | 		} | 
 | 		return chan; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | static struct dma_chan *find_candidate(struct dma_device *device, | 
 | 				       const dma_cap_mask_t *mask, | 
 | 				       dma_filter_fn fn, void *fn_param) | 
 | { | 
 | 	struct dma_chan *chan = private_candidate(mask, device, fn, fn_param); | 
 | 	int err; | 
 |  | 
 | 	if (chan) { | 
 | 		/* Found a suitable channel, try to grab, prep, and return it. | 
 | 		 * We first set DMA_PRIVATE to disable balance_ref_count as this | 
 | 		 * channel will not be published in the general-purpose | 
 | 		 * allocator | 
 | 		 */ | 
 | 		dma_cap_set(DMA_PRIVATE, device->cap_mask); | 
 | 		device->privatecnt++; | 
 | 		err = dma_chan_get(chan); | 
 |  | 
 | 		if (err) { | 
 | 			if (err == -ENODEV) { | 
 | 				dev_dbg(device->dev, "%s: %s module removed\n", | 
 | 					__func__, dma_chan_name(chan)); | 
 | 				list_del_rcu(&device->global_node); | 
 | 			} else | 
 | 				dev_dbg(device->dev, | 
 | 					"%s: failed to get %s: (%d)\n", | 
 | 					 __func__, dma_chan_name(chan), err); | 
 |  | 
 | 			if (--device->privatecnt == 0) | 
 | 				dma_cap_clear(DMA_PRIVATE, device->cap_mask); | 
 |  | 
 | 			chan = ERR_PTR(err); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return chan ? chan : ERR_PTR(-EPROBE_DEFER); | 
 | } | 
 |  | 
 | /** | 
 |  * dma_get_slave_channel - try to get specific channel exclusively | 
 |  * @chan:	target channel | 
 |  */ | 
 | struct dma_chan *dma_get_slave_channel(struct dma_chan *chan) | 
 | { | 
 | 	int err = -EBUSY; | 
 |  | 
 | 	/* lock against __dma_request_channel */ | 
 | 	mutex_lock(&dma_list_mutex); | 
 |  | 
 | 	if (chan->client_count == 0) { | 
 | 		struct dma_device *device = chan->device; | 
 |  | 
 | 		dma_cap_set(DMA_PRIVATE, device->cap_mask); | 
 | 		device->privatecnt++; | 
 | 		err = dma_chan_get(chan); | 
 | 		if (err) { | 
 | 			dev_dbg(chan->device->dev, | 
 | 				"%s: failed to get %s: (%d)\n", | 
 | 				__func__, dma_chan_name(chan), err); | 
 | 			chan = NULL; | 
 | 			if (--device->privatecnt == 0) | 
 | 				dma_cap_clear(DMA_PRIVATE, device->cap_mask); | 
 | 		} | 
 | 	} else | 
 | 		chan = NULL; | 
 |  | 
 | 	mutex_unlock(&dma_list_mutex); | 
 |  | 
 |  | 
 | 	return chan; | 
 | } | 
 | EXPORT_SYMBOL_GPL(dma_get_slave_channel); | 
 |  | 
 | struct dma_chan *dma_get_any_slave_channel(struct dma_device *device) | 
 | { | 
 | 	dma_cap_mask_t mask; | 
 | 	struct dma_chan *chan; | 
 |  | 
 | 	dma_cap_zero(mask); | 
 | 	dma_cap_set(DMA_SLAVE, mask); | 
 |  | 
 | 	/* lock against __dma_request_channel */ | 
 | 	mutex_lock(&dma_list_mutex); | 
 |  | 
 | 	chan = find_candidate(device, &mask, NULL, NULL); | 
 |  | 
 | 	mutex_unlock(&dma_list_mutex); | 
 |  | 
 | 	return IS_ERR(chan) ? NULL : chan; | 
 | } | 
 | EXPORT_SYMBOL_GPL(dma_get_any_slave_channel); | 
 |  | 
 | /** | 
 |  * __dma_request_channel - try to allocate an exclusive channel | 
 |  * @mask:	capabilities that the channel must satisfy | 
 |  * @fn:		optional callback to disposition available channels | 
 |  * @fn_param:	opaque parameter to pass to dma_filter_fn() | 
 |  * @np:		device node to look for DMA channels | 
 |  * | 
 |  * Returns pointer to appropriate DMA channel on success or NULL. | 
 |  */ | 
 | struct dma_chan *__dma_request_channel(const dma_cap_mask_t *mask, | 
 | 				       dma_filter_fn fn, void *fn_param, | 
 | 				       struct device_node *np) | 
 | { | 
 | 	struct dma_device *device, *_d; | 
 | 	struct dma_chan *chan = NULL; | 
 |  | 
 | 	/* Find a channel */ | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	list_for_each_entry_safe(device, _d, &dma_device_list, global_node) { | 
 | 		/* Finds a DMA controller with matching device node */ | 
 | 		if (np && device->dev->of_node && np != device->dev->of_node) | 
 | 			continue; | 
 |  | 
 | 		chan = find_candidate(device, mask, fn, fn_param); | 
 | 		if (!IS_ERR(chan)) | 
 | 			break; | 
 |  | 
 | 		chan = NULL; | 
 | 	} | 
 | 	mutex_unlock(&dma_list_mutex); | 
 |  | 
 | 	pr_debug("%s: %s (%s)\n", | 
 | 		 __func__, | 
 | 		 chan ? "success" : "fail", | 
 | 		 chan ? dma_chan_name(chan) : NULL); | 
 |  | 
 | 	return chan; | 
 | } | 
 | EXPORT_SYMBOL_GPL(__dma_request_channel); | 
 |  | 
 | static const struct dma_slave_map *dma_filter_match(struct dma_device *device, | 
 | 						    const char *name, | 
 | 						    struct device *dev) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	if (!device->filter.mapcnt) | 
 | 		return NULL; | 
 |  | 
 | 	for (i = 0; i < device->filter.mapcnt; i++) { | 
 | 		const struct dma_slave_map *map = &device->filter.map[i]; | 
 |  | 
 | 		if (!strcmp(map->devname, dev_name(dev)) && | 
 | 		    !strcmp(map->slave, name)) | 
 | 			return map; | 
 | 	} | 
 |  | 
 | 	return NULL; | 
 | } | 
 |  | 
 | /** | 
 |  * dma_request_chan - try to allocate an exclusive slave channel | 
 |  * @dev:	pointer to client device structure | 
 |  * @name:	slave channel name | 
 |  * | 
 |  * Returns pointer to appropriate DMA channel on success or an error pointer. | 
 |  */ | 
 | struct dma_chan *dma_request_chan(struct device *dev, const char *name) | 
 | { | 
 | 	struct dma_device *d, *_d; | 
 | 	struct dma_chan *chan = NULL; | 
 |  | 
 | 	/* If device-tree is present get slave info from here */ | 
 | 	if (dev->of_node) | 
 | 		chan = of_dma_request_slave_channel(dev->of_node, name); | 
 |  | 
 | 	/* If device was enumerated by ACPI get slave info from here */ | 
 | 	if (has_acpi_companion(dev) && !chan) | 
 | 		chan = acpi_dma_request_slave_chan_by_name(dev, name); | 
 |  | 
 | 	if (PTR_ERR(chan) == -EPROBE_DEFER) | 
 | 		return chan; | 
 |  | 
 | 	if (!IS_ERR_OR_NULL(chan)) | 
 | 		goto found; | 
 |  | 
 | 	/* Try to find the channel via the DMA filter map(s) */ | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	list_for_each_entry_safe(d, _d, &dma_device_list, global_node) { | 
 | 		dma_cap_mask_t mask; | 
 | 		const struct dma_slave_map *map = dma_filter_match(d, name, dev); | 
 |  | 
 | 		if (!map) | 
 | 			continue; | 
 |  | 
 | 		dma_cap_zero(mask); | 
 | 		dma_cap_set(DMA_SLAVE, mask); | 
 |  | 
 | 		chan = find_candidate(d, &mask, d->filter.fn, map->param); | 
 | 		if (!IS_ERR(chan)) | 
 | 			break; | 
 | 	} | 
 | 	mutex_unlock(&dma_list_mutex); | 
 |  | 
 | 	if (IS_ERR(chan)) | 
 | 		return chan; | 
 | 	if (!chan) | 
 | 		return ERR_PTR(-EPROBE_DEFER); | 
 |  | 
 | found: | 
 | #ifdef CONFIG_DEBUG_FS | 
 | 	chan->dbg_client_name = kasprintf(GFP_KERNEL, "%s:%s", dev_name(dev), | 
 | 					  name); | 
 | #endif | 
 |  | 
 | 	chan->name = kasprintf(GFP_KERNEL, "dma:%s", name); | 
 | 	if (!chan->name) | 
 | 		return chan; | 
 | 	chan->slave = dev; | 
 |  | 
 | 	if (sysfs_create_link(&chan->dev->device.kobj, &dev->kobj, | 
 | 			      DMA_SLAVE_NAME)) | 
 | 		dev_warn(dev, "Cannot create DMA %s symlink\n", DMA_SLAVE_NAME); | 
 | 	if (sysfs_create_link(&dev->kobj, &chan->dev->device.kobj, chan->name)) | 
 | 		dev_warn(dev, "Cannot create DMA %s symlink\n", chan->name); | 
 |  | 
 | 	return chan; | 
 | } | 
 | EXPORT_SYMBOL_GPL(dma_request_chan); | 
 |  | 
 | /** | 
 |  * dma_request_chan_by_mask - allocate a channel satisfying certain capabilities | 
 |  * @mask:	capabilities that the channel must satisfy | 
 |  * | 
 |  * Returns pointer to appropriate DMA channel on success or an error pointer. | 
 |  */ | 
 | struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask) | 
 | { | 
 | 	struct dma_chan *chan; | 
 |  | 
 | 	if (!mask) | 
 | 		return ERR_PTR(-ENODEV); | 
 |  | 
 | 	chan = __dma_request_channel(mask, NULL, NULL, NULL); | 
 | 	if (!chan) { | 
 | 		mutex_lock(&dma_list_mutex); | 
 | 		if (list_empty(&dma_device_list)) | 
 | 			chan = ERR_PTR(-EPROBE_DEFER); | 
 | 		else | 
 | 			chan = ERR_PTR(-ENODEV); | 
 | 		mutex_unlock(&dma_list_mutex); | 
 | 	} | 
 |  | 
 | 	return chan; | 
 | } | 
 | EXPORT_SYMBOL_GPL(dma_request_chan_by_mask); | 
 |  | 
 | void dma_release_channel(struct dma_chan *chan) | 
 | { | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	WARN_ONCE(chan->client_count != 1, | 
 | 		  "chan reference count %d != 1\n", chan->client_count); | 
 | 	dma_chan_put(chan); | 
 | 	/* drop PRIVATE cap enabled by __dma_request_channel() */ | 
 | 	if (--chan->device->privatecnt == 0) | 
 | 		dma_cap_clear(DMA_PRIVATE, chan->device->cap_mask); | 
 |  | 
 | 	if (chan->slave) { | 
 | 		sysfs_remove_link(&chan->dev->device.kobj, DMA_SLAVE_NAME); | 
 | 		sysfs_remove_link(&chan->slave->kobj, chan->name); | 
 | 		kfree(chan->name); | 
 | 		chan->name = NULL; | 
 | 		chan->slave = NULL; | 
 | 	} | 
 |  | 
 | #ifdef CONFIG_DEBUG_FS | 
 | 	kfree(chan->dbg_client_name); | 
 | 	chan->dbg_client_name = NULL; | 
 | #endif | 
 | 	mutex_unlock(&dma_list_mutex); | 
 | } | 
 | EXPORT_SYMBOL_GPL(dma_release_channel); | 
 |  | 
 | /** | 
 |  * dmaengine_get - register interest in dma_channels | 
 |  */ | 
 | void dmaengine_get(void) | 
 | { | 
 | 	struct dma_device *device, *_d; | 
 | 	struct dma_chan *chan; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	dmaengine_ref_count++; | 
 |  | 
 | 	/* try to grab channels */ | 
 | 	list_for_each_entry_safe(device, _d, &dma_device_list, global_node) { | 
 | 		if (dma_has_cap(DMA_PRIVATE, device->cap_mask)) | 
 | 			continue; | 
 | 		list_for_each_entry(chan, &device->channels, device_node) { | 
 | 			err = dma_chan_get(chan); | 
 | 			if (err == -ENODEV) { | 
 | 				/* module removed before we could use it */ | 
 | 				list_del_rcu(&device->global_node); | 
 | 				break; | 
 | 			} else if (err) | 
 | 				dev_dbg(chan->device->dev, | 
 | 					"%s: failed to get %s: (%d)\n", | 
 | 					__func__, dma_chan_name(chan), err); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* if this is the first reference and there were channels | 
 | 	 * waiting we need to rebalance to get those channels | 
 | 	 * incorporated into the channel table | 
 | 	 */ | 
 | 	if (dmaengine_ref_count == 1) | 
 | 		dma_channel_rebalance(); | 
 | 	mutex_unlock(&dma_list_mutex); | 
 | } | 
 | EXPORT_SYMBOL(dmaengine_get); | 
 |  | 
 | /** | 
 |  * dmaengine_put - let DMA drivers be removed when ref_count == 0 | 
 |  */ | 
 | void dmaengine_put(void) | 
 | { | 
 | 	struct dma_device *device, *_d; | 
 | 	struct dma_chan *chan; | 
 |  | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	dmaengine_ref_count--; | 
 | 	BUG_ON(dmaengine_ref_count < 0); | 
 | 	/* drop channel references */ | 
 | 	list_for_each_entry_safe(device, _d, &dma_device_list, global_node) { | 
 | 		if (dma_has_cap(DMA_PRIVATE, device->cap_mask)) | 
 | 			continue; | 
 | 		list_for_each_entry(chan, &device->channels, device_node) | 
 | 			dma_chan_put(chan); | 
 | 	} | 
 | 	mutex_unlock(&dma_list_mutex); | 
 | } | 
 | EXPORT_SYMBOL(dmaengine_put); | 
 |  | 
 | static bool device_has_all_tx_types(struct dma_device *device) | 
 | { | 
 | 	/* A device that satisfies this test has channels that will never cause | 
 | 	 * an async_tx channel switch event as all possible operation types can | 
 | 	 * be handled. | 
 | 	 */ | 
 | 	#ifdef CONFIG_ASYNC_TX_DMA | 
 | 	if (!dma_has_cap(DMA_INTERRUPT, device->cap_mask)) | 
 | 		return false; | 
 | 	#endif | 
 |  | 
 | 	#if IS_ENABLED(CONFIG_ASYNC_MEMCPY) | 
 | 	if (!dma_has_cap(DMA_MEMCPY, device->cap_mask)) | 
 | 		return false; | 
 | 	#endif | 
 |  | 
 | 	#if IS_ENABLED(CONFIG_ASYNC_XOR) | 
 | 	if (!dma_has_cap(DMA_XOR, device->cap_mask)) | 
 | 		return false; | 
 |  | 
 | 	#ifndef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA | 
 | 	if (!dma_has_cap(DMA_XOR_VAL, device->cap_mask)) | 
 | 		return false; | 
 | 	#endif | 
 | 	#endif | 
 |  | 
 | 	#if IS_ENABLED(CONFIG_ASYNC_PQ) | 
 | 	if (!dma_has_cap(DMA_PQ, device->cap_mask)) | 
 | 		return false; | 
 |  | 
 | 	#ifndef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA | 
 | 	if (!dma_has_cap(DMA_PQ_VAL, device->cap_mask)) | 
 | 		return false; | 
 | 	#endif | 
 | 	#endif | 
 |  | 
 | 	return true; | 
 | } | 
 |  | 
 | static int get_dma_id(struct dma_device *device) | 
 | { | 
 | 	int rc = ida_alloc(&dma_ida, GFP_KERNEL); | 
 |  | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 | 	device->dev_id = rc; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __dma_async_device_channel_register(struct dma_device *device, | 
 | 					       struct dma_chan *chan) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	chan->local = alloc_percpu(typeof(*chan->local)); | 
 | 	if (!chan->local) | 
 | 		return -ENOMEM; | 
 | 	chan->dev = kzalloc(sizeof(*chan->dev), GFP_KERNEL); | 
 | 	if (!chan->dev) { | 
 | 		rc = -ENOMEM; | 
 | 		goto err_free_local; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * When the chan_id is a negative value, we are dynamically adding | 
 | 	 * the channel. Otherwise we are static enumerating. | 
 | 	 */ | 
 | 	mutex_lock(&device->chan_mutex); | 
 | 	chan->chan_id = ida_alloc(&device->chan_ida, GFP_KERNEL); | 
 | 	mutex_unlock(&device->chan_mutex); | 
 | 	if (chan->chan_id < 0) { | 
 | 		pr_err("%s: unable to alloc ida for chan: %d\n", | 
 | 		       __func__, chan->chan_id); | 
 | 		rc = chan->chan_id; | 
 | 		goto err_free_dev; | 
 | 	} | 
 |  | 
 | 	chan->dev->device.class = &dma_devclass; | 
 | 	chan->dev->device.parent = device->dev; | 
 | 	chan->dev->chan = chan; | 
 | 	chan->dev->dev_id = device->dev_id; | 
 | 	dev_set_name(&chan->dev->device, "dma%dchan%d", | 
 | 		     device->dev_id, chan->chan_id); | 
 | 	rc = device_register(&chan->dev->device); | 
 | 	if (rc) | 
 | 		goto err_out_ida; | 
 | 	chan->client_count = 0; | 
 | 	device->chancnt++; | 
 |  | 
 | 	return 0; | 
 |  | 
 |  err_out_ida: | 
 | 	mutex_lock(&device->chan_mutex); | 
 | 	ida_free(&device->chan_ida, chan->chan_id); | 
 | 	mutex_unlock(&device->chan_mutex); | 
 |  err_free_dev: | 
 | 	kfree(chan->dev); | 
 |  err_free_local: | 
 | 	free_percpu(chan->local); | 
 | 	return rc; | 
 | } | 
 |  | 
 | int dma_async_device_channel_register(struct dma_device *device, | 
 | 				      struct dma_chan *chan) | 
 | { | 
 | 	int rc; | 
 |  | 
 | 	rc = __dma_async_device_channel_register(device, chan); | 
 | 	if (rc < 0) | 
 | 		return rc; | 
 |  | 
 | 	dma_channel_rebalance(); | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL_GPL(dma_async_device_channel_register); | 
 |  | 
 | static void __dma_async_device_channel_unregister(struct dma_device *device, | 
 | 						  struct dma_chan *chan) | 
 | { | 
 | 	WARN_ONCE(!device->device_release && chan->client_count, | 
 | 		  "%s called while %d clients hold a reference\n", | 
 | 		  __func__, chan->client_count); | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	device->chancnt--; | 
 | 	chan->dev->chan = NULL; | 
 | 	mutex_unlock(&dma_list_mutex); | 
 | 	mutex_lock(&device->chan_mutex); | 
 | 	ida_free(&device->chan_ida, chan->chan_id); | 
 | 	mutex_unlock(&device->chan_mutex); | 
 | 	device_unregister(&chan->dev->device); | 
 | 	free_percpu(chan->local); | 
 | } | 
 |  | 
 | void dma_async_device_channel_unregister(struct dma_device *device, | 
 | 					 struct dma_chan *chan) | 
 | { | 
 | 	__dma_async_device_channel_unregister(device, chan); | 
 | 	dma_channel_rebalance(); | 
 | } | 
 | EXPORT_SYMBOL_GPL(dma_async_device_channel_unregister); | 
 |  | 
 | /** | 
 |  * dma_async_device_register - registers DMA devices found | 
 |  * @device:	pointer to &struct dma_device | 
 |  * | 
 |  * After calling this routine the structure should not be freed except in the | 
 |  * device_release() callback which will be called after | 
 |  * dma_async_device_unregister() is called and no further references are taken. | 
 |  */ | 
 | int dma_async_device_register(struct dma_device *device) | 
 | { | 
 | 	int rc; | 
 | 	struct dma_chan* chan; | 
 |  | 
 | 	if (!device) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* validate device routines */ | 
 | 	if (!device->dev) { | 
 | 		pr_err("DMAdevice must have dev\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	device->owner = device->dev->driver->owner; | 
 |  | 
 | 	if (dma_has_cap(DMA_MEMCPY, device->cap_mask) && !device->device_prep_dma_memcpy) { | 
 | 		dev_err(device->dev, | 
 | 			"Device claims capability %s, but op is not defined\n", | 
 | 			"DMA_MEMCPY"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (dma_has_cap(DMA_XOR, device->cap_mask) && !device->device_prep_dma_xor) { | 
 | 		dev_err(device->dev, | 
 | 			"Device claims capability %s, but op is not defined\n", | 
 | 			"DMA_XOR"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (dma_has_cap(DMA_XOR_VAL, device->cap_mask) && !device->device_prep_dma_xor_val) { | 
 | 		dev_err(device->dev, | 
 | 			"Device claims capability %s, but op is not defined\n", | 
 | 			"DMA_XOR_VAL"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (dma_has_cap(DMA_PQ, device->cap_mask) && !device->device_prep_dma_pq) { | 
 | 		dev_err(device->dev, | 
 | 			"Device claims capability %s, but op is not defined\n", | 
 | 			"DMA_PQ"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (dma_has_cap(DMA_PQ_VAL, device->cap_mask) && !device->device_prep_dma_pq_val) { | 
 | 		dev_err(device->dev, | 
 | 			"Device claims capability %s, but op is not defined\n", | 
 | 			"DMA_PQ_VAL"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (dma_has_cap(DMA_MEMSET, device->cap_mask) && !device->device_prep_dma_memset) { | 
 | 		dev_err(device->dev, | 
 | 			"Device claims capability %s, but op is not defined\n", | 
 | 			"DMA_MEMSET"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (dma_has_cap(DMA_INTERRUPT, device->cap_mask) && !device->device_prep_dma_interrupt) { | 
 | 		dev_err(device->dev, | 
 | 			"Device claims capability %s, but op is not defined\n", | 
 | 			"DMA_INTERRUPT"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (dma_has_cap(DMA_CYCLIC, device->cap_mask) && !device->device_prep_dma_cyclic) { | 
 | 		dev_err(device->dev, | 
 | 			"Device claims capability %s, but op is not defined\n", | 
 | 			"DMA_CYCLIC"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (dma_has_cap(DMA_INTERLEAVE, device->cap_mask) && !device->device_prep_interleaved_dma) { | 
 | 		dev_err(device->dev, | 
 | 			"Device claims capability %s, but op is not defined\n", | 
 | 			"DMA_INTERLEAVE"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 |  | 
 | 	if (!device->device_tx_status) { | 
 | 		dev_err(device->dev, "Device tx_status is not defined\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 |  | 
 | 	if (!device->device_issue_pending) { | 
 | 		dev_err(device->dev, "Device issue_pending is not defined\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (!device->device_release) | 
 | 		dev_dbg(device->dev, | 
 | 			 "WARN: Device release is not defined so it is not safe to unbind this driver while in use\n"); | 
 |  | 
 | 	kref_init(&device->ref); | 
 |  | 
 | 	/* note: this only matters in the | 
 | 	 * CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=n case | 
 | 	 */ | 
 | 	if (device_has_all_tx_types(device)) | 
 | 		dma_cap_set(DMA_ASYNC_TX, device->cap_mask); | 
 |  | 
 | 	rc = get_dma_id(device); | 
 | 	if (rc != 0) | 
 | 		return rc; | 
 |  | 
 | 	mutex_init(&device->chan_mutex); | 
 | 	ida_init(&device->chan_ida); | 
 |  | 
 | 	/* represent channels in sysfs. Probably want devs too */ | 
 | 	list_for_each_entry(chan, &device->channels, device_node) { | 
 | 		rc = __dma_async_device_channel_register(device, chan); | 
 | 		if (rc < 0) | 
 | 			goto err_out; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	/* take references on public channels */ | 
 | 	if (dmaengine_ref_count && !dma_has_cap(DMA_PRIVATE, device->cap_mask)) | 
 | 		list_for_each_entry(chan, &device->channels, device_node) { | 
 | 			/* if clients are already waiting for channels we need | 
 | 			 * to take references on their behalf | 
 | 			 */ | 
 | 			if (dma_chan_get(chan) == -ENODEV) { | 
 | 				/* note we can only get here for the first | 
 | 				 * channel as the remaining channels are | 
 | 				 * guaranteed to get a reference | 
 | 				 */ | 
 | 				rc = -ENODEV; | 
 | 				mutex_unlock(&dma_list_mutex); | 
 | 				goto err_out; | 
 | 			} | 
 | 		} | 
 | 	list_add_tail_rcu(&device->global_node, &dma_device_list); | 
 | 	if (dma_has_cap(DMA_PRIVATE, device->cap_mask)) | 
 | 		device->privatecnt++;	/* Always private */ | 
 | 	dma_channel_rebalance(); | 
 | 	mutex_unlock(&dma_list_mutex); | 
 |  | 
 | 	dmaengine_debug_register(device); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_out: | 
 | 	/* if we never registered a channel just release the idr */ | 
 | 	if (!device->chancnt) { | 
 | 		ida_free(&dma_ida, device->dev_id); | 
 | 		return rc; | 
 | 	} | 
 |  | 
 | 	list_for_each_entry(chan, &device->channels, device_node) { | 
 | 		if (chan->local == NULL) | 
 | 			continue; | 
 | 		mutex_lock(&dma_list_mutex); | 
 | 		chan->dev->chan = NULL; | 
 | 		mutex_unlock(&dma_list_mutex); | 
 | 		device_unregister(&chan->dev->device); | 
 | 		free_percpu(chan->local); | 
 | 	} | 
 | 	return rc; | 
 | } | 
 | EXPORT_SYMBOL(dma_async_device_register); | 
 |  | 
 | /** | 
 |  * dma_async_device_unregister - unregister a DMA device | 
 |  * @device:	pointer to &struct dma_device | 
 |  * | 
 |  * This routine is called by dma driver exit routines, dmaengine holds module | 
 |  * references to prevent it being called while channels are in use. | 
 |  */ | 
 | void dma_async_device_unregister(struct dma_device *device) | 
 | { | 
 | 	struct dma_chan *chan, *n; | 
 |  | 
 | 	dmaengine_debug_unregister(device); | 
 |  | 
 | 	list_for_each_entry_safe(chan, n, &device->channels, device_node) | 
 | 		__dma_async_device_channel_unregister(device, chan); | 
 |  | 
 | 	mutex_lock(&dma_list_mutex); | 
 | 	/* | 
 | 	 * setting DMA_PRIVATE ensures the device being torn down will not | 
 | 	 * be used in the channel_table | 
 | 	 */ | 
 | 	dma_cap_set(DMA_PRIVATE, device->cap_mask); | 
 | 	dma_channel_rebalance(); | 
 | 	ida_free(&dma_ida, device->dev_id); | 
 | 	dma_device_put(device); | 
 | 	mutex_unlock(&dma_list_mutex); | 
 | } | 
 | EXPORT_SYMBOL(dma_async_device_unregister); | 
 |  | 
 | static void dmam_device_release(struct device *dev, void *res) | 
 | { | 
 | 	struct dma_device *device; | 
 |  | 
 | 	device = *(struct dma_device **)res; | 
 | 	dma_async_device_unregister(device); | 
 | } | 
 |  | 
 | /** | 
 |  * dmaenginem_async_device_register - registers DMA devices found | 
 |  * @device:	pointer to &struct dma_device | 
 |  * | 
 |  * The operation is managed and will be undone on driver detach. | 
 |  */ | 
 | int dmaenginem_async_device_register(struct dma_device *device) | 
 | { | 
 | 	void *p; | 
 | 	int ret; | 
 |  | 
 | 	p = devres_alloc(dmam_device_release, sizeof(void *), GFP_KERNEL); | 
 | 	if (!p) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = dma_async_device_register(device); | 
 | 	if (!ret) { | 
 | 		*(struct dma_device **)p = device; | 
 | 		devres_add(device->dev, p); | 
 | 	} else { | 
 | 		devres_free(p); | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(dmaenginem_async_device_register); | 
 |  | 
 | struct dmaengine_unmap_pool { | 
 | 	struct kmem_cache *cache; | 
 | 	const char *name; | 
 | 	mempool_t *pool; | 
 | 	size_t size; | 
 | }; | 
 |  | 
 | #define __UNMAP_POOL(x) { .size = x, .name = "dmaengine-unmap-" __stringify(x) } | 
 | static struct dmaengine_unmap_pool unmap_pool[] = { | 
 | 	__UNMAP_POOL(2), | 
 | 	#if IS_ENABLED(CONFIG_DMA_ENGINE_RAID) | 
 | 	__UNMAP_POOL(16), | 
 | 	__UNMAP_POOL(128), | 
 | 	__UNMAP_POOL(256), | 
 | 	#endif | 
 | }; | 
 |  | 
 | static struct dmaengine_unmap_pool *__get_unmap_pool(int nr) | 
 | { | 
 | 	int order = get_count_order(nr); | 
 |  | 
 | 	switch (order) { | 
 | 	case 0 ... 1: | 
 | 		return &unmap_pool[0]; | 
 | #if IS_ENABLED(CONFIG_DMA_ENGINE_RAID) | 
 | 	case 2 ... 4: | 
 | 		return &unmap_pool[1]; | 
 | 	case 5 ... 7: | 
 | 		return &unmap_pool[2]; | 
 | 	case 8: | 
 | 		return &unmap_pool[3]; | 
 | #endif | 
 | 	default: | 
 | 		BUG(); | 
 | 		return NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static void dmaengine_unmap(struct kref *kref) | 
 | { | 
 | 	struct dmaengine_unmap_data *unmap = container_of(kref, typeof(*unmap), kref); | 
 | 	struct device *dev = unmap->dev; | 
 | 	int cnt, i; | 
 |  | 
 | 	cnt = unmap->to_cnt; | 
 | 	for (i = 0; i < cnt; i++) | 
 | 		dma_unmap_page(dev, unmap->addr[i], unmap->len, | 
 | 			       DMA_TO_DEVICE); | 
 | 	cnt += unmap->from_cnt; | 
 | 	for (; i < cnt; i++) | 
 | 		dma_unmap_page(dev, unmap->addr[i], unmap->len, | 
 | 			       DMA_FROM_DEVICE); | 
 | 	cnt += unmap->bidi_cnt; | 
 | 	for (; i < cnt; i++) { | 
 | 		if (unmap->addr[i] == 0) | 
 | 			continue; | 
 | 		dma_unmap_page(dev, unmap->addr[i], unmap->len, | 
 | 			       DMA_BIDIRECTIONAL); | 
 | 	} | 
 | 	cnt = unmap->map_cnt; | 
 | 	mempool_free(unmap, __get_unmap_pool(cnt)->pool); | 
 | } | 
 |  | 
 | void dmaengine_unmap_put(struct dmaengine_unmap_data *unmap) | 
 | { | 
 | 	if (unmap) | 
 | 		kref_put(&unmap->kref, dmaengine_unmap); | 
 | } | 
 | EXPORT_SYMBOL_GPL(dmaengine_unmap_put); | 
 |  | 
 | static void dmaengine_destroy_unmap_pool(void) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(unmap_pool); i++) { | 
 | 		struct dmaengine_unmap_pool *p = &unmap_pool[i]; | 
 |  | 
 | 		mempool_destroy(p->pool); | 
 | 		p->pool = NULL; | 
 | 		kmem_cache_destroy(p->cache); | 
 | 		p->cache = NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static int __init dmaengine_init_unmap_pool(void) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(unmap_pool); i++) { | 
 | 		struct dmaengine_unmap_pool *p = &unmap_pool[i]; | 
 | 		size_t size; | 
 |  | 
 | 		size = sizeof(struct dmaengine_unmap_data) + | 
 | 		       sizeof(dma_addr_t) * p->size; | 
 |  | 
 | 		p->cache = kmem_cache_create(p->name, size, 0, | 
 | 					     SLAB_HWCACHE_ALIGN, NULL); | 
 | 		if (!p->cache) | 
 | 			break; | 
 | 		p->pool = mempool_create_slab_pool(1, p->cache); | 
 | 		if (!p->pool) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	if (i == ARRAY_SIZE(unmap_pool)) | 
 | 		return 0; | 
 |  | 
 | 	dmaengine_destroy_unmap_pool(); | 
 | 	return -ENOMEM; | 
 | } | 
 |  | 
 | struct dmaengine_unmap_data * | 
 | dmaengine_get_unmap_data(struct device *dev, int nr, gfp_t flags) | 
 | { | 
 | 	struct dmaengine_unmap_data *unmap; | 
 |  | 
 | 	unmap = mempool_alloc(__get_unmap_pool(nr)->pool, flags); | 
 | 	if (!unmap) | 
 | 		return NULL; | 
 |  | 
 | 	memset(unmap, 0, sizeof(*unmap)); | 
 | 	kref_init(&unmap->kref); | 
 | 	unmap->dev = dev; | 
 | 	unmap->map_cnt = nr; | 
 |  | 
 | 	return unmap; | 
 | } | 
 | EXPORT_SYMBOL(dmaengine_get_unmap_data); | 
 |  | 
 | void dma_async_tx_descriptor_init(struct dma_async_tx_descriptor *tx, | 
 | 	struct dma_chan *chan) | 
 | { | 
 | 	tx->chan = chan; | 
 | 	#ifdef CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH | 
 | 	spin_lock_init(&tx->lock); | 
 | 	#endif | 
 | } | 
 | EXPORT_SYMBOL(dma_async_tx_descriptor_init); | 
 |  | 
 | static inline int desc_check_and_set_metadata_mode( | 
 | 	struct dma_async_tx_descriptor *desc, enum dma_desc_metadata_mode mode) | 
 | { | 
 | 	/* Make sure that the metadata mode is not mixed */ | 
 | 	if (!desc->desc_metadata_mode) { | 
 | 		if (dmaengine_is_metadata_mode_supported(desc->chan, mode)) | 
 | 			desc->desc_metadata_mode = mode; | 
 | 		else | 
 | 			return -ENOTSUPP; | 
 | 	} else if (desc->desc_metadata_mode != mode) { | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | int dmaengine_desc_attach_metadata(struct dma_async_tx_descriptor *desc, | 
 | 				   void *data, size_t len) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (!desc) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ret = desc_check_and_set_metadata_mode(desc, DESC_METADATA_CLIENT); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (!desc->metadata_ops || !desc->metadata_ops->attach) | 
 | 		return -ENOTSUPP; | 
 |  | 
 | 	return desc->metadata_ops->attach(desc, data, len); | 
 | } | 
 | EXPORT_SYMBOL_GPL(dmaengine_desc_attach_metadata); | 
 |  | 
 | void *dmaengine_desc_get_metadata_ptr(struct dma_async_tx_descriptor *desc, | 
 | 				      size_t *payload_len, size_t *max_len) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (!desc) | 
 | 		return ERR_PTR(-EINVAL); | 
 |  | 
 | 	ret = desc_check_and_set_metadata_mode(desc, DESC_METADATA_ENGINE); | 
 | 	if (ret) | 
 | 		return ERR_PTR(ret); | 
 |  | 
 | 	if (!desc->metadata_ops || !desc->metadata_ops->get_ptr) | 
 | 		return ERR_PTR(-ENOTSUPP); | 
 |  | 
 | 	return desc->metadata_ops->get_ptr(desc, payload_len, max_len); | 
 | } | 
 | EXPORT_SYMBOL_GPL(dmaengine_desc_get_metadata_ptr); | 
 |  | 
 | int dmaengine_desc_set_metadata_len(struct dma_async_tx_descriptor *desc, | 
 | 				    size_t payload_len) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (!desc) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ret = desc_check_and_set_metadata_mode(desc, DESC_METADATA_ENGINE); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	if (!desc->metadata_ops || !desc->metadata_ops->set_len) | 
 | 		return -ENOTSUPP; | 
 |  | 
 | 	return desc->metadata_ops->set_len(desc, payload_len); | 
 | } | 
 | EXPORT_SYMBOL_GPL(dmaengine_desc_set_metadata_len); | 
 |  | 
 | /** | 
 |  * dma_wait_for_async_tx - spin wait for a transaction to complete | 
 |  * @tx:		in-flight transaction to wait on | 
 |  */ | 
 | enum dma_status | 
 | dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx) | 
 | { | 
 | 	unsigned long dma_sync_wait_timeout = jiffies + msecs_to_jiffies(5000); | 
 |  | 
 | 	if (!tx) | 
 | 		return DMA_COMPLETE; | 
 |  | 
 | 	while (tx->cookie == -EBUSY) { | 
 | 		if (time_after_eq(jiffies, dma_sync_wait_timeout)) { | 
 | 			dev_err(tx->chan->device->dev, | 
 | 				"%s timeout waiting for descriptor submission\n", | 
 | 				__func__); | 
 | 			return DMA_ERROR; | 
 | 		} | 
 | 		cpu_relax(); | 
 | 	} | 
 | 	return dma_sync_wait(tx->chan, tx->cookie); | 
 | } | 
 | EXPORT_SYMBOL_GPL(dma_wait_for_async_tx); | 
 |  | 
 | /** | 
 |  * dma_run_dependencies - process dependent operations on the target channel | 
 |  * @tx:		transaction with dependencies | 
 |  * | 
 |  * Helper routine for DMA drivers to process (start) dependent operations | 
 |  * on their target channel. | 
 |  */ | 
 | void dma_run_dependencies(struct dma_async_tx_descriptor *tx) | 
 | { | 
 | 	struct dma_async_tx_descriptor *dep = txd_next(tx); | 
 | 	struct dma_async_tx_descriptor *dep_next; | 
 | 	struct dma_chan *chan; | 
 |  | 
 | 	if (!dep) | 
 | 		return; | 
 |  | 
 | 	/* we'll submit tx->next now, so clear the link */ | 
 | 	txd_clear_next(tx); | 
 | 	chan = dep->chan; | 
 |  | 
 | 	/* keep submitting up until a channel switch is detected | 
 | 	 * in that case we will be called again as a result of | 
 | 	 * processing the interrupt from async_tx_channel_switch | 
 | 	 */ | 
 | 	for (; dep; dep = dep_next) { | 
 | 		txd_lock(dep); | 
 | 		txd_clear_parent(dep); | 
 | 		dep_next = txd_next(dep); | 
 | 		if (dep_next && dep_next->chan == chan) | 
 | 			txd_clear_next(dep); /* ->next will be submitted */ | 
 | 		else | 
 | 			dep_next = NULL; /* submit current dep and terminate */ | 
 | 		txd_unlock(dep); | 
 |  | 
 | 		dep->tx_submit(dep); | 
 | 	} | 
 |  | 
 | 	chan->device->device_issue_pending(chan); | 
 | } | 
 | EXPORT_SYMBOL_GPL(dma_run_dependencies); | 
 |  | 
 | static int __init dma_bus_init(void) | 
 | { | 
 | 	int err = dmaengine_init_unmap_pool(); | 
 |  | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	err = class_register(&dma_devclass); | 
 | 	if (!err) | 
 | 		dmaengine_debugfs_init(); | 
 |  | 
 | 	return err; | 
 | } | 
 | arch_initcall(dma_bus_init); |