| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  * Copyright (C) 2015 Dmitry Eremin-Solenikov | 
 |  * Copyright (C) 1999-2001 Nicolas Pitre | 
 |  * | 
 |  * Generic IRQ handling for the SA11x0. | 
 |  */ | 
 | #include <linux/init.h> | 
 | #include <linux/module.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/io.h> | 
 | #include <linux/irq.h> | 
 | #include <linux/irqdomain.h> | 
 | #include <linux/syscore_ops.h> | 
 | #include <linux/irqchip/irq-sa11x0.h> | 
 |  | 
 | #include <soc/sa1100/pwer.h> | 
 |  | 
 | #include <asm/exception.h> | 
 |  | 
 | #define ICIP	0x00  /* IC IRQ Pending reg. */ | 
 | #define ICMR	0x04  /* IC Mask Reg.        */ | 
 | #define ICLR	0x08  /* IC Level Reg.       */ | 
 | #define ICCR	0x0C  /* IC Control Reg.     */ | 
 | #define ICFP	0x10  /* IC FIQ Pending reg. */ | 
 | #define ICPR	0x20  /* IC Pending Reg.     */ | 
 |  | 
 | static void __iomem *iobase; | 
 |  | 
 | /* | 
 |  * We don't need to ACK IRQs on the SA1100 unless they're GPIOs | 
 |  * this is for internal IRQs i.e. from IRQ LCD to RTCAlrm. | 
 |  */ | 
 | static void sa1100_mask_irq(struct irq_data *d) | 
 | { | 
 | 	u32 reg; | 
 |  | 
 | 	reg = readl_relaxed(iobase + ICMR); | 
 | 	reg &= ~BIT(d->hwirq); | 
 | 	writel_relaxed(reg, iobase + ICMR); | 
 | } | 
 |  | 
 | static void sa1100_unmask_irq(struct irq_data *d) | 
 | { | 
 | 	u32 reg; | 
 |  | 
 | 	reg = readl_relaxed(iobase + ICMR); | 
 | 	reg |= BIT(d->hwirq); | 
 | 	writel_relaxed(reg, iobase + ICMR); | 
 | } | 
 |  | 
 | static int sa1100_set_wake(struct irq_data *d, unsigned int on) | 
 | { | 
 | 	return sa11x0_sc_set_wake(d->hwirq, on); | 
 | } | 
 |  | 
 | static struct irq_chip sa1100_normal_chip = { | 
 | 	.name		= "SC", | 
 | 	.irq_ack	= sa1100_mask_irq, | 
 | 	.irq_mask	= sa1100_mask_irq, | 
 | 	.irq_unmask	= sa1100_unmask_irq, | 
 | 	.irq_set_wake	= sa1100_set_wake, | 
 | }; | 
 |  | 
 | static int sa1100_normal_irqdomain_map(struct irq_domain *d, | 
 | 		unsigned int irq, irq_hw_number_t hwirq) | 
 | { | 
 | 	irq_set_chip_and_handler(irq, &sa1100_normal_chip, | 
 | 				 handle_level_irq); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct irq_domain_ops sa1100_normal_irqdomain_ops = { | 
 | 	.map = sa1100_normal_irqdomain_map, | 
 | 	.xlate = irq_domain_xlate_onetwocell, | 
 | }; | 
 |  | 
 | static struct irq_domain *sa1100_normal_irqdomain; | 
 |  | 
 | static struct sa1100irq_state { | 
 | 	unsigned int	saved; | 
 | 	unsigned int	icmr; | 
 | 	unsigned int	iclr; | 
 | 	unsigned int	iccr; | 
 | } sa1100irq_state; | 
 |  | 
 | static int sa1100irq_suspend(void) | 
 | { | 
 | 	struct sa1100irq_state *st = &sa1100irq_state; | 
 |  | 
 | 	st->saved = 1; | 
 | 	st->icmr = readl_relaxed(iobase + ICMR); | 
 | 	st->iclr = readl_relaxed(iobase + ICLR); | 
 | 	st->iccr = readl_relaxed(iobase + ICCR); | 
 |  | 
 | 	/* | 
 | 	 * Disable all GPIO-based interrupts. | 
 | 	 */ | 
 | 	writel_relaxed(st->icmr & 0xfffff000, iobase + ICMR); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void sa1100irq_resume(void) | 
 | { | 
 | 	struct sa1100irq_state *st = &sa1100irq_state; | 
 |  | 
 | 	if (st->saved) { | 
 | 		writel_relaxed(st->iccr, iobase + ICCR); | 
 | 		writel_relaxed(st->iclr, iobase + ICLR); | 
 |  | 
 | 		writel_relaxed(st->icmr, iobase + ICMR); | 
 | 	} | 
 | } | 
 |  | 
 | static struct syscore_ops sa1100irq_syscore_ops = { | 
 | 	.suspend	= sa1100irq_suspend, | 
 | 	.resume		= sa1100irq_resume, | 
 | }; | 
 |  | 
 | static int __init sa1100irq_init_devicefs(void) | 
 | { | 
 | 	register_syscore_ops(&sa1100irq_syscore_ops); | 
 | 	return 0; | 
 | } | 
 |  | 
 | device_initcall(sa1100irq_init_devicefs); | 
 |  | 
 | static asmlinkage void __exception_irq_entry | 
 | sa1100_handle_irq(struct pt_regs *regs) | 
 | { | 
 | 	uint32_t icip, icmr, mask; | 
 |  | 
 | 	do { | 
 | 		icip = readl_relaxed(iobase + ICIP); | 
 | 		icmr = readl_relaxed(iobase + ICMR); | 
 | 		mask = icip & icmr; | 
 |  | 
 | 		if (mask == 0) | 
 | 			break; | 
 |  | 
 | 		handle_domain_irq(sa1100_normal_irqdomain, | 
 | 				ffs(mask) - 1, regs); | 
 | 	} while (1); | 
 | } | 
 |  | 
 | void __init sa11x0_init_irq_nodt(int irq_start, resource_size_t io_start) | 
 | { | 
 | 	iobase = ioremap(io_start, SZ_64K); | 
 | 	if (WARN_ON(!iobase)) | 
 | 		return; | 
 |  | 
 | 	/* disable all IRQs */ | 
 | 	writel_relaxed(0, iobase + ICMR); | 
 |  | 
 | 	/* all IRQs are IRQ, not FIQ */ | 
 | 	writel_relaxed(0, iobase + ICLR); | 
 |  | 
 | 	/* | 
 | 	 * Whatever the doc says, this has to be set for the wait-on-irq | 
 | 	 * instruction to work... on a SA1100 rev 9 at least. | 
 | 	 */ | 
 | 	writel_relaxed(1, iobase + ICCR); | 
 |  | 
 | 	sa1100_normal_irqdomain = irq_domain_add_simple(NULL, | 
 | 			32, irq_start, | 
 | 			&sa1100_normal_irqdomain_ops, NULL); | 
 |  | 
 | 	set_handle_irq(sa1100_handle_irq); | 
 | } |