| // SPDX-License-Identifier: GPL-2.0 | 
 | // | 
 | // General Purpose SPI multiplexer | 
 |  | 
 | #include <linux/err.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/mux/consumer.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/spi/spi.h> | 
 |  | 
 | #define SPI_MUX_NO_CS	((unsigned int)-1) | 
 |  | 
 | /** | 
 |  * DOC: Driver description | 
 |  * | 
 |  * This driver supports a MUX on an SPI bus. This can be useful when you need | 
 |  * more chip selects than the hardware peripherals support, or than are | 
 |  * available in a particular board setup. | 
 |  * | 
 |  * The driver will create an additional SPI controller. Devices added under the | 
 |  * mux will be handled as 'chip selects' on this controller. | 
 |  */ | 
 |  | 
 | /** | 
 |  * struct spi_mux_priv - the basic spi_mux structure | 
 |  * @spi:		pointer to the device struct attached to the parent | 
 |  *			spi controller | 
 |  * @current_cs:		The current chip select set in the mux | 
 |  * @child_msg_complete: The mux replaces the complete callback in the child's | 
 |  *			message to its own callback; this field is used by the | 
 |  *			driver to store the child's callback during a transfer | 
 |  * @child_msg_context:	Used to store the child's context to the callback | 
 |  * @child_msg_dev:	Used to store the spi_device pointer to the child | 
 |  * @mux:		mux_control structure used to provide chip selects for | 
 |  *			downstream spi devices | 
 |  */ | 
 | struct spi_mux_priv { | 
 | 	struct spi_device	*spi; | 
 | 	unsigned int		current_cs; | 
 |  | 
 | 	void			(*child_msg_complete)(void *context); | 
 | 	void			*child_msg_context; | 
 | 	struct spi_device	*child_msg_dev; | 
 | 	struct mux_control	*mux; | 
 | }; | 
 |  | 
 | /* should not get called when the parent controller is doing a transfer */ | 
 | static int spi_mux_select(struct spi_device *spi) | 
 | { | 
 | 	struct spi_mux_priv *priv = spi_controller_get_devdata(spi->controller); | 
 | 	int ret; | 
 |  | 
 | 	if (priv->current_cs == spi->chip_select) | 
 | 		return 0; | 
 |  | 
 | 	dev_dbg(&priv->spi->dev, "setting up the mux for cs %d\n", | 
 | 		spi->chip_select); | 
 |  | 
 | 	/* copy the child device's settings except for the cs */ | 
 | 	priv->spi->max_speed_hz = spi->max_speed_hz; | 
 | 	priv->spi->mode = spi->mode; | 
 | 	priv->spi->bits_per_word = spi->bits_per_word; | 
 |  | 
 | 	ret = mux_control_select(priv->mux, spi->chip_select); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	priv->current_cs = spi->chip_select; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int spi_mux_setup(struct spi_device *spi) | 
 | { | 
 | 	struct spi_mux_priv *priv = spi_controller_get_devdata(spi->controller); | 
 |  | 
 | 	/* | 
 | 	 * can be called multiple times, won't do a valid setup now but we will | 
 | 	 * change the settings when we do a transfer (necessary because we | 
 | 	 * can't predict from which device it will be anyway) | 
 | 	 */ | 
 | 	return spi_setup(priv->spi); | 
 | } | 
 |  | 
 | static void spi_mux_complete_cb(void *context) | 
 | { | 
 | 	struct spi_mux_priv *priv = (struct spi_mux_priv *)context; | 
 | 	struct spi_controller *ctlr = spi_get_drvdata(priv->spi); | 
 | 	struct spi_message *m = ctlr->cur_msg; | 
 |  | 
 | 	m->complete = priv->child_msg_complete; | 
 | 	m->context = priv->child_msg_context; | 
 | 	m->spi = priv->child_msg_dev; | 
 | 	spi_finalize_current_message(ctlr); | 
 | 	mux_control_deselect(priv->mux); | 
 | } | 
 |  | 
 | static int spi_mux_transfer_one_message(struct spi_controller *ctlr, | 
 | 						struct spi_message *m) | 
 | { | 
 | 	struct spi_mux_priv *priv = spi_controller_get_devdata(ctlr); | 
 | 	struct spi_device *spi = m->spi; | 
 | 	int ret; | 
 |  | 
 | 	ret = spi_mux_select(spi); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	/* | 
 | 	 * Replace the complete callback, context and spi_device with our own | 
 | 	 * pointers. Save originals | 
 | 	 */ | 
 | 	priv->child_msg_complete = m->complete; | 
 | 	priv->child_msg_context = m->context; | 
 | 	priv->child_msg_dev = m->spi; | 
 |  | 
 | 	m->complete = spi_mux_complete_cb; | 
 | 	m->context = priv; | 
 | 	m->spi = priv->spi; | 
 |  | 
 | 	/* do the transfer */ | 
 | 	return spi_async(priv->spi, m); | 
 | } | 
 |  | 
 | static int spi_mux_probe(struct spi_device *spi) | 
 | { | 
 | 	struct spi_controller *ctlr; | 
 | 	struct spi_mux_priv *priv; | 
 | 	int ret; | 
 |  | 
 | 	ctlr = spi_alloc_master(&spi->dev, sizeof(*priv)); | 
 | 	if (!ctlr) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	spi_set_drvdata(spi, ctlr); | 
 | 	priv = spi_controller_get_devdata(ctlr); | 
 | 	priv->spi = spi; | 
 |  | 
 | 	priv->mux = devm_mux_control_get(&spi->dev, NULL); | 
 | 	if (IS_ERR(priv->mux)) { | 
 | 		ret = PTR_ERR(priv->mux); | 
 | 		if (ret != -EPROBE_DEFER) | 
 | 			dev_err(&spi->dev, "failed to get control-mux\n"); | 
 | 		goto err_put_ctlr; | 
 | 	} | 
 |  | 
 | 	priv->current_cs = SPI_MUX_NO_CS; | 
 |  | 
 | 	/* supported modes are the same as our parent's */ | 
 | 	ctlr->mode_bits = spi->controller->mode_bits; | 
 | 	ctlr->flags = spi->controller->flags; | 
 | 	ctlr->transfer_one_message = spi_mux_transfer_one_message; | 
 | 	ctlr->setup = spi_mux_setup; | 
 | 	ctlr->num_chipselect = mux_control_states(priv->mux); | 
 | 	ctlr->bus_num = -1; | 
 | 	ctlr->dev.of_node = spi->dev.of_node; | 
 |  | 
 | 	ret = devm_spi_register_controller(&spi->dev, ctlr); | 
 | 	if (ret) | 
 | 		goto err_put_ctlr; | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_put_ctlr: | 
 | 	spi_controller_put(ctlr); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct of_device_id spi_mux_of_match[] = { | 
 | 	{ .compatible = "spi-mux" }, | 
 | 	{ } | 
 | }; | 
 |  | 
 | static struct spi_driver spi_mux_driver = { | 
 | 	.probe  = spi_mux_probe, | 
 | 	.driver = { | 
 | 		.name   = "spi-mux", | 
 | 		.of_match_table = spi_mux_of_match, | 
 | 	}, | 
 | }; | 
 |  | 
 | module_spi_driver(spi_mux_driver); | 
 |  | 
 | MODULE_DESCRIPTION("SPI multiplexer"); | 
 | MODULE_LICENSE("GPL"); |