| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * Driver for +/-1 degree C, SMBus-Compatible Remote/Local Temperature Sensor | 
 |  * with Overtemperature Alarm | 
 |  * | 
 |  * Copyright (C) 2011 AppearTV AS | 
 |  * | 
 |  * Derived from: | 
 |  * | 
 |  *  Based on the max1619 driver. | 
 |  *  Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net> | 
 |  *                          Jean Delvare <jdelvare@suse.de> | 
 |  * | 
 |  * The MAX6642 is a sensor chip made by Maxim. | 
 |  * It reports up to two temperatures (its own plus up to | 
 |  * one external one). Complete datasheet can be | 
 |  * obtained from Maxim's website at: | 
 |  *   http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf | 
 |  */ | 
 |  | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/jiffies.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/hwmon.h> | 
 | #include <linux/hwmon-sysfs.h> | 
 | #include <linux/err.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/sysfs.h> | 
 |  | 
 | static const unsigned short normal_i2c[] = { | 
 | 	0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END }; | 
 |  | 
 | /* | 
 |  * The MAX6642 registers | 
 |  */ | 
 |  | 
 | #define MAX6642_REG_R_MAN_ID		0xFE | 
 | #define MAX6642_REG_R_CONFIG		0x03 | 
 | #define MAX6642_REG_W_CONFIG		0x09 | 
 | #define MAX6642_REG_R_STATUS		0x02 | 
 | #define MAX6642_REG_R_LOCAL_TEMP	0x00 | 
 | #define MAX6642_REG_R_LOCAL_TEMPL	0x11 | 
 | #define MAX6642_REG_R_LOCAL_HIGH	0x05 | 
 | #define MAX6642_REG_W_LOCAL_HIGH	0x0B | 
 | #define MAX6642_REG_R_REMOTE_TEMP	0x01 | 
 | #define MAX6642_REG_R_REMOTE_TEMPL	0x10 | 
 | #define MAX6642_REG_R_REMOTE_HIGH	0x07 | 
 | #define MAX6642_REG_W_REMOTE_HIGH	0x0D | 
 |  | 
 | /* | 
 |  * Conversions | 
 |  */ | 
 |  | 
 | static int temp_from_reg10(int val) | 
 | { | 
 | 	return val * 250; | 
 | } | 
 |  | 
 | static int temp_from_reg(int val) | 
 | { | 
 | 	return val * 1000; | 
 | } | 
 |  | 
 | static int temp_to_reg(int val) | 
 | { | 
 | 	return val / 1000; | 
 | } | 
 |  | 
 | /* | 
 |  * Client data (each client gets its own) | 
 |  */ | 
 |  | 
 | struct max6642_data { | 
 | 	struct i2c_client *client; | 
 | 	struct mutex update_lock; | 
 | 	bool valid; /* zero until following fields are valid */ | 
 | 	unsigned long last_updated; /* in jiffies */ | 
 |  | 
 | 	/* registers values */ | 
 | 	u16 temp_input[2]; /* local/remote */ | 
 | 	u16 temp_high[2]; /* local/remote */ | 
 | 	u8 alarms; | 
 | }; | 
 |  | 
 | /* | 
 |  * Real code | 
 |  */ | 
 |  | 
 | static void max6642_init_client(struct max6642_data *data, | 
 | 				struct i2c_client *client) | 
 | { | 
 | 	u8 config; | 
 |  | 
 | 	/* | 
 | 	 * Start the conversions. | 
 | 	 */ | 
 | 	config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); | 
 | 	if (config & 0x40) | 
 | 		i2c_smbus_write_byte_data(client, MAX6642_REG_W_CONFIG, | 
 | 					  config & 0xBF); /* run */ | 
 |  | 
 | 	data->temp_high[0] = i2c_smbus_read_byte_data(client, | 
 | 				MAX6642_REG_R_LOCAL_HIGH); | 
 | 	data->temp_high[1] = i2c_smbus_read_byte_data(client, | 
 | 				MAX6642_REG_R_REMOTE_HIGH); | 
 | } | 
 |  | 
 | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
 | static int max6642_detect(struct i2c_client *client, | 
 | 			  struct i2c_board_info *info) | 
 | { | 
 | 	struct i2c_adapter *adapter = client->adapter; | 
 | 	u8 reg_config, reg_status, man_id; | 
 |  | 
 | 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* identification */ | 
 | 	man_id = i2c_smbus_read_byte_data(client, MAX6642_REG_R_MAN_ID); | 
 | 	if (man_id != 0x4D) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* sanity check */ | 
 | 	if (i2c_smbus_read_byte_data(client, 0x04) != 0x4D | 
 | 	    || i2c_smbus_read_byte_data(client, 0x06) != 0x4D | 
 | 	    || i2c_smbus_read_byte_data(client, 0xff) != 0x4D) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* | 
 | 	 * We read the config and status register, the 4 lower bits in the | 
 | 	 * config register should be zero and bit 5, 3, 1 and 0 should be | 
 | 	 * zero in the status register. | 
 | 	 */ | 
 | 	reg_config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG); | 
 | 	if ((reg_config & 0x0f) != 0x00) | 
 | 		return -ENODEV; | 
 |  | 
 | 	/* in between, another round of sanity checks */ | 
 | 	if (i2c_smbus_read_byte_data(client, 0x04) != reg_config | 
 | 	    || i2c_smbus_read_byte_data(client, 0x06) != reg_config | 
 | 	    || i2c_smbus_read_byte_data(client, 0xff) != reg_config) | 
 | 		return -ENODEV; | 
 |  | 
 | 	reg_status = i2c_smbus_read_byte_data(client, MAX6642_REG_R_STATUS); | 
 | 	if ((reg_status & 0x2b) != 0x00) | 
 | 		return -ENODEV; | 
 |  | 
 | 	strscpy(info->type, "max6642", I2C_NAME_SIZE); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct max6642_data *max6642_update_device(struct device *dev) | 
 | { | 
 | 	struct max6642_data *data = dev_get_drvdata(dev); | 
 | 	struct i2c_client *client = data->client; | 
 | 	u16 val, tmp; | 
 |  | 
 | 	mutex_lock(&data->update_lock); | 
 |  | 
 | 	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) { | 
 | 		dev_dbg(dev, "Updating max6642 data.\n"); | 
 | 		val = i2c_smbus_read_byte_data(client, | 
 | 					MAX6642_REG_R_LOCAL_TEMPL); | 
 | 		tmp = (val >> 6) & 3; | 
 | 		val = i2c_smbus_read_byte_data(client, | 
 | 					MAX6642_REG_R_LOCAL_TEMP); | 
 | 		val = (val << 2) | tmp; | 
 | 		data->temp_input[0] = val; | 
 | 		val = i2c_smbus_read_byte_data(client, | 
 | 					MAX6642_REG_R_REMOTE_TEMPL); | 
 | 		tmp = (val >> 6) & 3; | 
 | 		val = i2c_smbus_read_byte_data(client, | 
 | 					MAX6642_REG_R_REMOTE_TEMP); | 
 | 		val = (val << 2) | tmp; | 
 | 		data->temp_input[1] = val; | 
 | 		data->alarms = i2c_smbus_read_byte_data(client, | 
 | 					MAX6642_REG_R_STATUS); | 
 |  | 
 | 		data->last_updated = jiffies; | 
 | 		data->valid = true; | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&data->update_lock); | 
 |  | 
 | 	return data; | 
 | } | 
 |  | 
 | /* | 
 |  * Sysfs stuff | 
 |  */ | 
 |  | 
 | static ssize_t temp_max10_show(struct device *dev, | 
 | 			       struct device_attribute *dev_attr, char *buf) | 
 | { | 
 | 	struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr); | 
 | 	struct max6642_data *data = max6642_update_device(dev); | 
 |  | 
 | 	return sprintf(buf, "%d\n", | 
 | 		       temp_from_reg10(data->temp_input[attr->index])); | 
 | } | 
 |  | 
 | static ssize_t temp_max_show(struct device *dev, | 
 | 			     struct device_attribute *attr, char *buf) | 
 | { | 
 | 	struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr); | 
 | 	struct max6642_data *data = max6642_update_device(dev); | 
 |  | 
 | 	return sprintf(buf, "%d\n", temp_from_reg(data->temp_high[attr2->nr])); | 
 | } | 
 |  | 
 | static ssize_t temp_max_store(struct device *dev, | 
 | 			      struct device_attribute *attr, const char *buf, | 
 | 			      size_t count) | 
 | { | 
 | 	struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr); | 
 | 	struct max6642_data *data = dev_get_drvdata(dev); | 
 | 	unsigned long val; | 
 | 	int err; | 
 |  | 
 | 	err = kstrtoul(buf, 10, &val); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	mutex_lock(&data->update_lock); | 
 | 	data->temp_high[attr2->nr] = clamp_val(temp_to_reg(val), 0, 255); | 
 | 	i2c_smbus_write_byte_data(data->client, attr2->index, | 
 | 				  data->temp_high[attr2->nr]); | 
 | 	mutex_unlock(&data->update_lock); | 
 | 	return count; | 
 | } | 
 |  | 
 | static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, | 
 | 			  char *buf) | 
 | { | 
 | 	int bitnr = to_sensor_dev_attr(attr)->index; | 
 | 	struct max6642_data *data = max6642_update_device(dev); | 
 | 	return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); | 
 | } | 
 |  | 
 | static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_max10, 0); | 
 | static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_max10, 1); | 
 | static SENSOR_DEVICE_ATTR_2_RW(temp1_max, temp_max, 0, | 
 | 			       MAX6642_REG_W_LOCAL_HIGH); | 
 | static SENSOR_DEVICE_ATTR_2_RW(temp2_max, temp_max, 1, | 
 | 			       MAX6642_REG_W_REMOTE_HIGH); | 
 | static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 2); | 
 | static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 6); | 
 | static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 4); | 
 |  | 
 | static struct attribute *max6642_attrs[] = { | 
 | 	&sensor_dev_attr_temp1_input.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_input.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp1_max.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_max.dev_attr.attr, | 
 |  | 
 | 	&sensor_dev_attr_temp2_fault.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr, | 
 | 	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr, | 
 | 	NULL | 
 | }; | 
 | ATTRIBUTE_GROUPS(max6642); | 
 |  | 
 | static int max6642_probe(struct i2c_client *client) | 
 | { | 
 | 	struct device *dev = &client->dev; | 
 | 	struct max6642_data *data; | 
 | 	struct device *hwmon_dev; | 
 |  | 
 | 	data = devm_kzalloc(dev, sizeof(struct max6642_data), GFP_KERNEL); | 
 | 	if (!data) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	data->client = client; | 
 | 	mutex_init(&data->update_lock); | 
 |  | 
 | 	/* Initialize the MAX6642 chip */ | 
 | 	max6642_init_client(data, client); | 
 |  | 
 | 	hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev, | 
 | 							   client->name, data, | 
 | 							   max6642_groups); | 
 | 	return PTR_ERR_OR_ZERO(hwmon_dev); | 
 | } | 
 |  | 
 | /* | 
 |  * Driver data (common to all clients) | 
 |  */ | 
 |  | 
 | static const struct i2c_device_id max6642_id[] = { | 
 | 	{ "max6642", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, max6642_id); | 
 |  | 
 | static struct i2c_driver max6642_driver = { | 
 | 	.class		= I2C_CLASS_HWMON, | 
 | 	.driver = { | 
 | 		.name	= "max6642", | 
 | 	}, | 
 | 	.probe_new	= max6642_probe, | 
 | 	.id_table	= max6642_id, | 
 | 	.detect		= max6642_detect, | 
 | 	.address_list	= normal_i2c, | 
 | }; | 
 |  | 
 | module_i2c_driver(max6642_driver); | 
 |  | 
 | MODULE_AUTHOR("Per Dalen <per.dalen@appeartv.com>"); | 
 | MODULE_DESCRIPTION("MAX6642 sensor driver"); | 
 | MODULE_LICENSE("GPL"); |