kgdb: don't use a notifier to enter kgdb at panic; call directly
Right now kgdb/kdb hooks up to debug panics by registering for the panic
notifier. This works OK except that it means that kgdb/kdb gets called
_after_ the CPUs in the system are taken offline. That means that if
anything important was happening on those CPUs (like something that might
have contributed to the panic) you can't debug them.
Specifically I ran into a case where I got a panic because a task was
"blocked for more than 120 seconds" which was detected on CPU 2. I nicely
got shown stack traces in the kernel log for all CPUs including CPU 0,
which was running 'PID: 111 Comm: kworker/0:1H' and was in the middle of
__mmc_switch().
I then ended up at the kdb prompt where switched over to kgdb to try to
look at local variables of the process on CPU 0. I found that I couldn't.
Digging more, I found that I had no info on any tasks running on CPUs
other than CPU 2 and that asking kdb for help showed me "Error: no saved
data for this cpu". This was because all the CPUs were offline.
Let's move the entry of kdb/kgdb to a direct call from panic() and stop
using the generic notifier. Putting a direct call in allows us to order
things more properly and it also doesn't seem like we're breaking any
abstractions by calling into the debugger from the panic function.
Daniel said:
: This patch changes the way kdump and kgdb interact with each other.
: However it would seem rather odd to have both tools simultaneously armed
: and, even if they were, the user still has the option to use panic_timeout
: to force a kdump to happen. Thus I think the change of order is
: acceptable.
Link: http://lkml.kernel.org/r/20190703170354.217312-1-dianders@chromium.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Feng Tang <feng.tang@intel.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
diff --git a/include/linux/kgdb.h b/include/linux/kgdb.h
index fbf144a..b072aeb 100644
--- a/include/linux/kgdb.h
+++ b/include/linux/kgdb.h
@@ -326,8 +326,10 @@
(raw_smp_processor_id() == atomic_read(&kgdb_active))
extern bool dbg_is_early;
extern void __init dbg_late_init(void);
+extern void kgdb_panic(const char *msg);
#else /* ! CONFIG_KGDB */
#define in_dbg_master() (0)
#define dbg_late_init()
+static inline void kgdb_panic(const char *msg) {}
#endif /* ! CONFIG_KGDB */
#endif /* _KGDB_H_ */
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 5cc608d..b26bf06 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -896,29 +896,24 @@
};
#endif
-static int kgdb_panic_event(struct notifier_block *self,
- unsigned long val,
- void *data)
+void kgdb_panic(const char *msg)
{
+ if (!kgdb_io_module_registered)
+ return;
+
/*
- * Avoid entering the debugger if we were triggered due to a panic
- * We don't want to get stuck waiting for input from user in such case.
- * panic_timeout indicates the system should automatically
+ * We don't want to get stuck waiting for input from user if
+ * "panic_timeout" indicates the system should automatically
* reboot on panic.
*/
if (panic_timeout)
- return NOTIFY_DONE;
+ return;
if (dbg_kdb_mode)
- kdb_printf("PANIC: %s\n", (char *)data);
- kgdb_breakpoint();
- return NOTIFY_DONE;
-}
+ kdb_printf("PANIC: %s\n", msg);
-static struct notifier_block kgdb_panic_event_nb = {
- .notifier_call = kgdb_panic_event,
- .priority = INT_MAX,
-};
+ kgdb_breakpoint();
+}
void __weak kgdb_arch_late(void)
{
@@ -968,8 +963,6 @@
kgdb_arch_late();
register_module_notifier(&dbg_module_load_nb);
register_reboot_notifier(&dbg_reboot_notifier);
- atomic_notifier_chain_register(&panic_notifier_list,
- &kgdb_panic_event_nb);
#ifdef CONFIG_MAGIC_SYSRQ
register_sysrq_key('g', &sysrq_dbg_op);
#endif
@@ -983,16 +976,14 @@
static void kgdb_unregister_callbacks(void)
{
/*
- * When this routine is called KGDB should unregister from the
- * panic handler and clean up, making sure it is not handling any
+ * When this routine is called KGDB should unregister from
+ * handlers and clean up, making sure it is not handling any
* break exceptions at the time.
*/
if (kgdb_io_module_registered) {
kgdb_io_module_registered = 0;
unregister_reboot_notifier(&dbg_reboot_notifier);
unregister_module_notifier(&dbg_module_load_nb);
- atomic_notifier_chain_unregister(&panic_notifier_list,
- &kgdb_panic_event_nb);
kgdb_arch_exit();
#ifdef CONFIG_MAGIC_SYSRQ
unregister_sysrq_key('g', &sysrq_dbg_op);
diff --git a/kernel/panic.c b/kernel/panic.c
index 057540b..d1ece4c 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -12,6 +12,7 @@
#include <linux/debug_locks.h>
#include <linux/sched/debug.h>
#include <linux/interrupt.h>
+#include <linux/kgdb.h>
#include <linux/kmsg_dump.h>
#include <linux/kallsyms.h>
#include <linux/notifier.h>
@@ -220,6 +221,13 @@
#endif
/*
+ * If kgdb is enabled, give it a chance to run before we stop all
+ * the other CPUs or else we won't be able to debug processes left
+ * running on them.
+ */
+ kgdb_panic(buf);
+
+ /*
* If we have crashed and we have a crash kernel loaded let it handle
* everything else.
* If we want to run this after calling panic_notifiers, pass
